Papers

Accurate and reliable pose information with respect to a reference frame is increasingly demanded across applications such as autonomous navigation, surveying, robotics, and augmented and mixed reality. Visual localization can serve as a complementary positioning modality to GNSS, whose applicability and accuracy are often limited. Yet, the accuracy potential of visual localization has not been systematically investigated against survey-grade demands. This is mainly due to the lack of publicly available, large-scale outdoor datasets with ground-truth poses in the sub-centimeter range. In this work, we address both gaps. We introduce a scalable visual localization pipeline that employs precisely georeferenced, high-resolution street-level imagery directly as the scene representation. It combines prior-guided reference candidate selection with on-the-fly local Structure-from-Motion reconstruction and PnP-based pose estimation. We further present the FHNW Muttenz dataset, a real-world dataset covering a contiguous 10 km street network mapped in two mobile mapping campaigns approximately 1.5 years apart. It consists of high-resolution reference imagery and query sequences acquired by four different cameras across five representative scenes. All images are precisely co-registered, yielding 6-DoF ground-truth poses in the sub-centimeter range. Using this dataset, we evaluate the accuracy potential of visual localization. Our experiments demonstrate median pose accuracies in the range of 1-5 cm for translation and 0.05-0.1{\deg} for rotation, reaching as low as 1 cm and 0.03{\deg} under favorable conditions. These results show that visual localization can complement survey-grade GNSS positioning, paving the way for 3D geospatial data acquisition using consumer devices and fully automated georeferencing approaches. The dataset is publicly available at: https://fhnw-muttenz-vl-dataset.github.io/.

This work presents a motion planning framework for UAV navigation in non-convex urban air corridors. The planner is based on a mixed-integer tracking model predictive control formulation that enforces corridor feasibility and dynamic consistency within a single optimization problem. To guarantee convergence to the target and mitigate the occurrence of local minima induced by non-convex geometry, a shortest-path-based offset cost with feasibility constraints is embedded directly into the planning problem. Numerical simulations show that the proposed formulation generates dynamically valid trajectories that satisfy the corridor constraints and converge to the target without relying on external global planning stages.

A key challenge in modern robotics is to adapt to changing environments, a challenge that is exacerbated when simulations cannot encompass every possible real-world configuration, and therefore Reinforcement Learning (RL) in the physical world becomes necessary. Continual Reinforcement Learning provides the tools to address this challenge; however, both the frameworks and the methods remain underexplored. Autonomous Racing and in particular the RoboRacer competition provide a testing ground for such methods, as learning to drive on a new track-floor combination with the least amount of new experience naturally frames a continual learning problem. This work tries to address this gap by proposing a continual RL framework based on Continual Backpropagation that is able, with only real-world data, to train a generalistic policy on a set of tracks and then fine- tune it within 15 minutes to outperform classical controllers. Furthermore, a comparison method based on offline RL is proposed, and a simulation analysis of the plasticity properties of the methods is conducted.

The dynamics of a holonomically constrained rigid body can be modeled by Newton-Euler equations subjected to geometric constraints. This is frequently formulated as a differential-algebraic equation (DAE) system of index 1. Inmultibody system (MBS) dynamics it is common (1) to numerically solve this system by means of integration schemes for ordinary differential equations, and (2) to treat the rigid body motion on the direct product Lie group SO (3)R3, although rigid body motions form the semidirect product Lie group SE (3). It is has been observed that the constraint satisfaction depends on which Lie group is used as configuration space (c-space). In this paper the problem is considered from a geometric perspective. It is shown that the constraints are exactly satisfied by a numerical integration scheme if they define a subgroup of the c-space. The subgroups of SE (3) have a significance for modeling mechanical systems, including lower kinematic (Reuleaux) pairs and are implicitly used in MBS modeling. It is concluded that SE (3) is the appropriate cspace for numerical DAE modeling of a constrained rigid body. This result does not immediately apply to MBS, however.

Marine life monitoring is limited by strict energy constraints, poor underwater connectivity, and the high cost of transmitting raw multimodal data from remote deployments. This paper proposes a low-consumption underwater monitoring architecture that combines always-on edge sensing with selective high-performance local reasoning. The system follows a hierarchical master–satellite design in which ultra-low-power MAX78000/MAX78002 microcontrollers continuously monitor visual and acoustic signals, while an NVIDIA Jetson Orin NX is activated only for scheduled processing, event-driven analysis, or researcher interaction. Once active, the Jetson executes a fully local multimodal pipeline for data ingestion, visual target extraction, embedding-based indexing, species identification, retrieval-augmented reasoning, and automated reporting. BioCLIP/OpenCLIP embeddings are used to organize mission data, marine taxonomic references, scientific documents, and operational metadata in local ChromaDB collections. A dedicated identification layer combines visual similarity search, centroid-based classification, and supervised classifiers to support adaptive species recognition. A LangChain-based multi-agent framework coordinates query routing, structured analysis, energy management, hardware reconfiguration, and report generation. The architecture is evaluated through visual and acoustic monitoring case studies. The proposed system bridges ultra-low-power continuous sensing with local multimodal intelligence, enabling underwater stations to produce structured, researcher-ready knowledge while compressing local data for flexible acoustic, optical, or satellite transmission, minimizing both energy use and communication overhead.

Diffusion Policies (DPs) are able to perform complex manipulation tasks. However, DPs are typically trained by minimizing a denoising objective, which provides limited control over generalization in the finite-data regimes common in robotics. In this letter, we propose PAC-DP, an approach that increases the performance of DPs in robotic manipulation tasks. By modeling the DP as a Bayesian neural network, and defining a PAC-Bayes generalization bound, we derive a novel training objective that augments the standard denoising loss with a Kullback-Leibler divergence regularizer between the posterior and prior parameter distributions. From the theoretical perspective, our approach provides a principled approach to regularize the training of DPs without significantly increasing the training time. From the practical point of view, experimental results demonstrate improved denoising performance, lower variational negative log-likelihood, and higher success rates across multiple robotic manipulation benchmarks. Crucially, the largest improvements are observed in low-data training regimes and complex tasks, establishing PAC-DP as a theoretically grounded framework for robot policy learning.

Autonomous free-flying robots in orbital environments require controllers that are both versatile and resource-efficient, yet maintaining a separate, task-specific policy for each mission profile is architecturally brittle and limits operational flexibility as requirements evolve. We introduce HYPER-GNC, a multi-task reinforcement learning framework in which a hypernetwork maps physics-informed task embeddings to the weights of a shared actor-critic policy, enabling a single compact controller to master four distinct GNC tasks: velocity tracking, docking, inspection, and navigation with obstacle avoidance. The continuous embedding space allows the controller to generalize to novel mission configurations at deployment time without any retraining. Extensive experiments demonstrate that HYPER-GNC achieves sample efficiency comparable to single-task specialists while maintaining stability under significant inertial perturbations and external body wrenches. We further validate the framework on a physical satellite emulator, successfully bridging the simulation-to-reality gap across all mission profiles. Code, trained models, and deployment scripts are made publicly available to support reproducibility.

Humans plan physical interactions by imagining the possible outcomes of candidate actions. However, existing visual world models primarily capture appearance dynamics while overlooking the tactile states that govern contact-rich interactions, potentially producing imagined futures that appear visually plausible but violate physical dynamics. We introduce FeelWorld, a hierarchical visuo-tactile world model that jointly predicts future visual latents and three tactile states. FeelWorld organizes these states hierarchically as contact state, a 3D tactile latent that encodes force-related information, and slip state. These states are jointly predicted by a shared latent dynamics model with explicit supervision. To prevent irrelevant tactile signals during free-space motion from degrading visual prediction, we introduce a contact-gated asymmetric attention mechanism that maintains a visual-only prediction pathway before contact and enables joint visuo-tactile dynamics prediction during contact. The model is further trained with autoregressive rollouts and context noise injection to improve robustness to compounding errors. The predicted contact and slip states also support contact-aware CEM planning. Experiments on chip grasping, fruit grasping, and USB insertion show that FeelWorld reduces 10-step LPIPS from 0.084 to 0.058 and maintains an LPIPS that is 61% lower than that of the visual baseline after an 80-step autoregressive rollout. FeelWorld also achieves an average zero-shot planning success rate of 81.7%, providing an effective approach for incorporating tactile sensing into world models.

Standard depth sensors systematically fail on transparent surfaces, creating corrupted 3D maps and severe navigation hazards. While specialized hardware sensors can detect glass, they lack modularity and have extensive hardware dependencies. Consequently, learning-based monocular depth estimation has emerged as a compelling alternative. However, domain-specific glass-aware monocular depth estimators struggle with unfamiliar indoor layouts; restricted by the severe scarcity of real-world glass depth annotations, they fail to generalize zero-shot to new settings. This motivates us to explore whether the extensive priors of text-to-image diffusion models can enable generalizable perception of transparent surfaces. We introduce SILICA, a unified pipeline leveraging these priors to jointly predict glass segmentation and glass-aware depth. This mutual information exchange establishes a robust spatial hierarchy, entirely eliminating the need for paired real-world glass depth annotations. Subsequently, we use the predicted segmentation mask to explicitly filter incorrect glass depth points from standard sensors, recovering accurate metric glass depth for downstream 3D mapping and autonomous collision avoidance. Supported by our novel Mirage 18k dataset, extensive experiments demonstrate that SILICA achieves remarkable zero-shot transfer across diverse, unseen environments, outperforming state-of-the-art models by almost 20% and setting a new benchmark for transparent surface perception.

3D reconstruction of unknown environments is a key application in robotics but is severely limited by the computational and energy capabilities of current aerial platforms. Deploying multiple UAVs and providing efficient and scalable path planning strategies are common approaches, but effective online coordination among UAVs remains a significant challenge. To address this problem, we propose a quality-adaptive decentralized decision-making strategy to build a 3D map with user-defined degrees of fidelity. The approach integrates a quality-oriented criterion based on TSDF confidence into view generation and information gain estimation to produce viewpoints consistent with the desired fidelity target. Additionally, we employ two levels of coordination: a penalty factor in the viewpoint evaluation to encourage local dispersion among the UAVs and a global imbalance correction mechanism. The latter, based on regularized clustering and optimal task assignment, is only triggered when an unbalanced configuration relative to high-information regions is detected. Simulation results demonstrate that the proposed method improves path efficiency compared to state-of-the-art multi-UAV exploration approaches, while also achieving higher-fidelity reconstructions in terms of coverage and accuracy. We make our code publicly available to the community.

Mobile manipulation requires robots to identify Floor Affordance (FloAff) that maximizes downstream manipulation success rather than merely ensuring navigation feasibility. FloAff prediction is a target-conditioned local spatial reasoning problem, yet existing methods suffer from representation ambiguity caused by irrelevant spatial context and arbitrary object orientations, while entangling shared and task-specific knowledge across heterogeneous manipulation skills. To address these challenges, we propose a unified framework for FloAff prediction from egocentric multimodal perception, consisting of canonical representation learning and progressive affordance prior learning. Specifically, we introduce a Canonical Floor Affordance Representation (CFAR), which learns canonical interaction geometry by preserving affordance-relevant local structure while eliminating nuisance spatial variations unrelated to robot base placement. We further propose Progressive Floor Affordance Learning (PFAL), which learns transferable FloAff priors from a foundation manipulation task and progressively adapts them to heterogeneous downstream manipulation skills. To facilitate systematic evaluation, we establish the first cross-scene, multi-view FloAff-Kitchen benchmark covering diverse manipulation skills, scene layouts, furniture styles, and viewpoints. Extensive experiments on three benchmark settings demonstrate that our method consistently outperforms strong baselines, while ablation studies validate the contribution of each proposed component. Project page: https://csu-hero-lab.github.io/FloAff-Kitchen_Web/

The introduction of new technologies, such as surgical robots, is driving the vision of a connected, smart operating room (OR). However, realizing this vision requires a deep understanding of surgical workflows, which relies on realistic datasets capturing the actions of all OR personnel from both full room and surgical field perspectives. Acquiring such data in real ORs is prohibitively challenging due to factors such as ethics committee approvals, limited space for camera installation, and sterility regulations preventing the use of tracking markers. We present a step-by-step methodology for re-enacting complete surgical procedures in a reconstructed OR. This approach enables the creation of repeatable and annotatable workflow datasets for training activity recognition models, generating scene graphs, and formalizing surgical process models. Developed for robot-assisted ophthalmic surgery, our methodology combines expert consultation, structured workflow formalization, OR reconstruction, role-based training, real OR observation, and iterative recording with post-take debriefing. We provide concrete recommendations to allow other research groups to seamlessly adopt this methodology for their own surgical domains.

Social robots that rely on large language models for conversation are unable to retain information across sessions. This absence of memory violates social expectations, potentially preventing the formation of persistent relationships. This paper presents a lightweight episodic memory module that integrates vector-based semantic retrieval with an LLM-controlled dialog system, deployed on the humanoid robot head Kim. The module employs a hybrid scoring function combining cosine similarity with a memory strength metric to retrieve contextually relevant past interactions and inject them into the generation prompt. The system was evaluated in a within-subjects video-based online study (N = 43) using the Human-Robot Interaction Evaluation Scale (HRIES). Results show that episodic memory significantly increased perceived sociability (d = 0.60, p < .001), with the strongest effects on perceived trustworthiness (d = 0.62) and warmth (d = 0.56). Perceived disturbance remained unchanged (d = 0.00), indicating that the implemented approach to personalized recall did not trigger privacy-related discomfort or uncanny valley effects. These findings suggest that episodic memory serves as a social lubricant in embodied Human-Robot Interaction, enhancing relational quality without eliciting negative affective responses.

Generalizable robot manipulation requires policies that can anticipate how visual scenes evolve while executing language instructions. While recent Vision-Language-Action models benefit from large-scale pretraining, their predominantly static pretraining objectives provide limited supervision for physical dynamics and temporal causality, leaving control-relevant knowledge to be learned from downstream robot demonstrations. Video generative models offer a promising foundation by encoding rich spatiotemporal priors through future predictions. However, existing Video-Action Models either couple video and action prediction in a shared backbone, making policy adaptation harder to optimize, or under-utilize video information when guiding the action branch. In this work, we introduce DeVA, a Decoupled Video-Action model with specialized video and action experts, multi-level feature transfer, and physically salient guidance. DeVA transfers representations from multiple video layers to the action expert, enabling rich information exchange while making policy learning more tractable. It further supervises intermediate video features and the action stream with physically salient guidance (affordance/depth). Experiments on both simulation benchmarks and real-world deployment demonstrate strong performance with limited data, faster convergence than a unified architecture, and clear performance gains from physical guidance.

Previous research has shown that a human-like robot's acceptance heavily depends on the setting in which it operates and its ability to perform relevant tasks. This paper, first, reports on how our robot processes natural language to generate a multimodal, verbal response integrating emotional expressions based on an emotion simulation backend. Then, it describes how visitors were invited to speak with our robot in their own language at three different, public locations, where the robot was running continuously for several days. The TAM2 questionnaire results reveal that on average users were motivated to use the robot and found it rather useful and easy to use regardless of the specific location. However, public spaces like the tourist information and the city library seem to be a better fit for our interactive, robotic head than an office environment such as the building authority, where the willingness to interact was lower. Overall, the robot's multi-lingual responses were very much appreciated, but every fifth user found the response time too slow impeding the dialog flow, which remains to be improved in future work.

Reinforcement learning can produce robust humanoid controllers, but each new task is typically trained as a separate policy with its own reward design and training process. Motion imitation provides an alternative source of motor competence by training policies to track retargeted human motions, yet the resulting controllers remain reference trackers and are not directly usable as task policies. We propose a three-stage pipeline that turns motion-imitation skills into a reusable hybrid motion prior (HMP) for humanoid locomotion. First, an expert policy is trained to imitate retargeted human motion-capture clips. Second, the expert is distilled into a frozen architecture composed of a proprioceptive encoder, a residual vector-quantized (RVQ) codebook, and an action decoder. Third, task-level policies are trained to solve locomotion tasks by selecting discrete codebook entries while the HMP remains frozen. We evaluate the method on velocity tracking, point-goal navigation, and fall-recovery velocity tracking in simulation, and deploy the velocity-tracking policy on a real Unitree G1 robot. The distillation process preserves the tracking behavior of the expert, while the resulting HMP can be reused without retraining as the action interface for different downstream locomotion policies. The learned HMP reveals an interpretable codebook structure in which the number of active RVQ stages modulates the available gait patterns. We further show that training the codebook with the rotation trick improves latent organization and reduces downstream falls compared with a standard straight-through estimator.

Bridging the sim-to-real gap is a central problem in robotics, and the prevailing approach is to build increasingly accurate simulators. Here, we propose another approach based on renormalization: using effective, resolution-dependent parameters to absorb details omitted by the simulator and reproduce real behavior. These parameters may differ from measured physical values because they compensate for what the simulator leaves out. We demonstrate this mechanism analytically for proportional–derivative (PD) control at finite simulation frequency, where proportional feedback changes the effective derivative gain and derivative feedback changes the effective inertia. We then interpret dynamic rope manipulation and underwater swimming through the same perspective. Finally, we present a practical procedure for choosing observables, identifying omitted physics, and determining effective parameters. Renormalization offers robotics a complementary path across the sim-to-real gap: effective parameters, real behavior.

Low-thrust trajectory optimization is a core technology in deep-space mission design. Indirect methods based on Pontryagin's Minimum Principle (PMP) offer rigorous optimality guarantees, yet their practical application faces three bottlenecks: (1) transversality conditions must be derived case by case for each constraint type; (2) different dynamics models require repeated code rewrites; and (3) shooting equations are highly sensitive to initial guesses. This paper presents HELIOS (Heuristic Engine for Low-thrust Interplanetary Optimization System), a trajectory optimization agent built around a large language model (LLM). Given a physical problem described in natural language, the system autonomously performs PMP symbolic derivation, SymPy verification, C++ shooting-code generation, and numerical solution without human intervention. Key innovations include: (1) a constraint-adaptive derivation framework that unifies arbitrary constraints into psi(x,p)=0 form and automatically generates stationarity conditions for free parameters (e.g., gravity-assist turning angle); (2) dynamics-adaptive four-module code generation supporting non-standard dynamics (solar sail, J2 perturbation) without modifying the underlying template; and (3) a general derivation rule set covering critical error-prone points in PMP derivation. Experiments on 11 progressive test scenarios show that HELIOS correctly derives and solves problems from simple rendezvous (8 variables) to multi-leg stay transfers (48 variables), gravity-assist trajectories (17 variables), and solar-sail minimum-time transfers (8 variables). The best compilation success rate reaches 100% (11/11). A multi-model comparison (8 open-source LLM backends, total scores 250-905) verifies the model-agnostic architecture and reveals a positive correlation between model scale and derivation capability.

While reinforcement learning for legged robots has achieved high motor performance, it has been constrained by the limited exploration capability of actions confined to the joint space. To address this issue, this study proposes a new method, Wrench-Augmented Reinforcement Learning (WARL), which introduces a wrenche (force and torque) into the action space. The proposed method combines wrench-guided exploration with a success rate-based curriculum mechanism to expand exploration capabilities in the early stages of learning, with the ultimate goal of acquiring behaviors based solely on joint control. Experiments using a quadruped robot demonstrated that WARL can learn robustly across diverse terrains and motor tasks without requiring terrain-specific reward adjustments or complex curriculum designs. Furthermore, an ablation study verified the effectiveness of the Switching Curriculum, which gradually eliminates the wrench. On the other hand, we also show that introducing a wrench can encourage behaviors that do not sufficiently exploit the robot's physical embodiment. These findings suggest that while wrench-based exploration enhancement is effective for improving learning efficiency, designing it in a way that is consistent with the robot's physical structure is a critical future challenge.

Brain-Machine Interfaces (BMIs), which link the brain to external devices, hold great potential in rehabilitation, human performance augmentation, and human-centered robotics. However, invasive BMIs face a critical challenge for long-term deployment due to neural drift, which degrades decoding performance over time and necessitates frequent recalibration. Existing methods designed to mitigate neural drift typically rely on either domain adaptation (DA) or domain generalization (DG) alone and often fail to capture fine-grained distribution shifts across neural subdomains, resulting in limited performance. To overcome these limitations, we propose Uncertainty-guided Self-paced Cycling (UnSPC), a robust framework that synergizes DA and DG for target domain refining under an Uncertainty-guided Self-paced Pseudo-labeling (UnSPL) mechanism. To handle subdomain neural drift across domains, UNSPL is proposed to iteratively mine reliable pseudo-labeled samples with a noise-robust ranking strategy for further fine-tuning. Leveraging these high-quality samples, we introduce a novel Cycling Adaptation and Generalization (CycAG) strategy, which integrates DA and DG within an iterative cycle to progressively mitigate both global and subdomain drift. This cyclic process enables effective alignment to evolving target distributions while preserving robust and transferable representations, thereby mitigating performance degradation under long-term neural drifts. Extensive experiments on multiple neural decoding datasets demonstrate the effectiveness and robustness of UnSPC. To our knowledge, our proposed UnSPC is the first to cyclically integrate DA and DG with pseudo-labeling, paving the way toward stable long-term BMI controls.

Precise control of soft manipulators remains challenging due to the difficulty of developing accurate yet computationally tractable models for model-based estimation and control. Reduced Cosserat-rod models provide a physics-based and control-oriented description of soft-robot dynamics, offering an explicit alternative to purely data-driven input-output representations. In this paper, we propose a moving-horizon estimation (MHE) and nonlinear model predictive control (NMPC) framework for cable-driven soft manipulators based on reduced Cosserat dynamics. A smooth cable-length-driven modeling formulation is developed by approximating the complementarity relationship between cable tension and cable slackness, enabling cable-length control without direct tension sensing. Based on this formulation, an MHE method is introduced to estimate the reduced state and reconstruct the manipulator configuration from end-effector pose measurements and cable-length information. An NMPC controller is then formulated to achieve task-space control under cable-length and cable-rate constraints. The proposed framework is validated through numerical simulations and experiments. Simulation results demonstrate the effectiveness of the estimator and controller for pose and strain-related regulation on a multi-cable soft manipulator. Experimental results on a four-cable prototype further show that the proposed MHE-NMPC scheme can be implemented in real time and enables accurate end-effector position tracking through cable-length control.

Brain-Machine Interfaces (BMIs) provide a direct communication pathway between the brain and external devices, enabling humans to control assistive and robotic technologies, with potential applications in rehabilitation, human motor augmentation, and human-centered robotics. However, due to neural drift, the performance of BMIs decreases over time, posing challenges for long-term viability, particularly for invasive BMIs (iBMIs). Existing solutions suffer from two main drawbacks: (i) difficulty in learning robust neural representations, and (ii) neglecting that neural drift varies across motor parameters (e.g., velocity, direction, and speed). To overcome these limitations, we propose Self-Supervised Consistency enhanced Disentangled Learning (SSCDL), a neural decoding generalization framework built on two key innovations. We first design a backbone model named Consistency enhanced Neural Decoder (CND), using a novel teacher-student consistency constraint with simulated neural signal perturbations to learn robust representations invariant to neural drift. Then, we employ three dedicated CNDs under the Complementary-Disentangled Generalization (CDG) mechanism, which disentangles motor signals into velocity, direction, and speed with inspiration from neural preference theory. This disentangled learning enables SSCDL to capture invariant neural representations from diverse neural preference perspectives, significantly enhancing cross-day generalization. Extensive experimental results show that SSCDL delivers state-of-the-art decoding performance, exhibiting high robustness and cross-day stability. These capabilities underscore its strong potential for long-term interaction in human-centric robotic and fine-grained assistive applications.

Real-time deployment of Vision-Language-Action (VLA) policies necessitates asynchronous execution, wherein subsequent action chunks are computed concurrently with the execution of the current chunk, leading to prediction-execution misalignment and manifesting as inter-chunk discontinuities. Existing methods either superficially smooth chunk boundaries, require costly policy optimization, or exclusively forward-predict proprioceptive states yet neglect critical visual observations. In this paper, we propose FutureRTC, a plug-and-play adaptation framework that predicts execution-time observations and states for asynchronous VLA control without modifying the underlying policy. Specifically, FutureRTC features a state correction module to compensate for the discrepancy between rolled-forward and actual execution-time proprioceptive states and an observation prediction module that forecasts execution-time visual representations by leveraging robot motion as an explicit physical prior through motion-aware feature transport and reconstruction. Furthermore, we introduce a policy consistency loss to align the action chunks generated from predicted contexts with those produced under the expected execution-time inputs of the VLA policy. Extensive experiments across simulated and real-world environments demonstrate that FutureRTC achieves superior robustness to inference delays, resulting in smoother trajectories, faster execution, and consistently higher task success rates.

Reliable wireless connectivity is essential for urban air mobility (UAM) networks in dense urban environments. It is therefore imperative to carefully plan the supporting communication infrastructure for UAM flight corridors. Most existing works optimize communication infrastructure and UAV flight paths independently, often leading to unnecessary base station (BS) deployment or excessive flight detours. This paper studies the joint optimization of BS deployment and UAV flight corridors in complex urban environments, aiming to minimize both infrastructure investment and flight distance while satisfying communication quality constraints. We propose CR-CMAB, a channel reciprocity-guided combinatorial multi-armed bandit framework. The framework constructs high-fidelity radio maps using 3D ray tracing, selects BS combinations via coverage-aware CMAB search, and dynamically expands the search space by identifying promising BS locations through channel reciprocity. Experimental results from a detailed case study demonstrate that CR-CMAB outperforms baseline methods with moderate computational time, yielding more strategically positioned BSs and shorter flight corridors. This study offers a practical planning perspective for cost-effective and communication-reliable UAM deployment in future smart cities.

World Action Models (WAMs) have emerged as a powerful paradigm for embodied intelligence, yet the prevailing reliance on pixel-level video generation creates a fundamental bottleneck. Forcing models to reconstruct task-irrelevant visual details dissipates representational capacity and renders policies vulnerable to visual distractors. In this paper, we propose LeapBot-WA, which establishes a novel Predictive-Latent paradigm for WAMs by operationalizing the Joint-Embedding Predictive Architecture (JEPA) as a World-Anchor. Departing from the traditional reliance on visual synthesis, LeapBot-WA shifts the core of world modeling to Predictive Semantic Alignment, extracting abstract physical dynamics directly within a latent foundation space. To bridge the modality gap between non-Gaussian predictive features and diffusion priors, we introduce the Isotropic Semantic Autoencoder (ISAE), which reshapes the anchor's latent space into a diffusion-friendly manifold to prevent off-manifold drift. Furthermore, we design an Asymmetric Mixture-of-Transformers (MoT) architecture. During training, an Anchor Diffusion Transformer acts as a privileged dynamics expert to guide the Action Diffusion Transformer; at inference, this heavy dynamics branch is pruned, enabling zero-overhead execution. LeapBot-WA achieves state-of-the-art performance among predictive models on LIBERO and matches top-tier generative WAMs on RoboTwin 2.0 without requiring large-scale trajectory pre-training. It further demonstrates superior zero-shot robustness to unseen environments and successful real-world transfer, establishing a highly efficient and robust latent-centric paradigm for scalable robotic control. Code: https://github.com/LeapWM/leapbot-wa.

Operating constrained dynamical systems requires controllers to efficiently solve complex tasks while enforcing recursive feasibility and physical constraints. To address these competing requirements, we present Feasible Action for Optimal Control (FAOC), a novel control framework integrating Reinforcement Learning (RL) and Optimal Control (OC). The core contribution is a computationally efficient, optimization-based mapping algorithm that transforms the RL agent's action from a static abstract set into a state-dependent feasible parameter set of the Optimal Control Problem (OCP), guaranteeing instantaneous parameter feasibility. When paired with invariant terminal sets, FAOC guarantees strict recursive feasibility and safe operation, effectively combining the predictable safety of OC with the behavioral flexibility of RL. Unlike prior work, the abstract action space does not require expert tuning, nor is the OCP formulation compromised by the inability of RL to guarantee feasibility. We evaluate FAOC on real-time motion planning for robot table tennis, where simulated experiments demonstrate superior sample efficiency and closed-loop performance compared to state-of-the-art baselines. We open-source the used implementation of the mapping algorithm and OCP for motion planning https://github.com/SonyResearch/feasible_action_for_optimal_control.

Cooperative perception through vehicle-to-everything (V2X) communication can overcome the inherent physical limitations of individual autonomous vehicles, such as occlusions and limited sensor range. However, the development of robust V2X algorithms, particularly those relying on unified spatial representations like bird's-eye view (BEV) representation, is hampered by the lack of large-scale, multi-modal, multi-task datasets. Moreover, collecting and annotating a large set of synchronized, real-world multi-agent data is prohibitively expensive. This has resulted in a landscape where existing V2X datasets are notably limited in both size and scope. To overcome this, we introduce SimBEV2X, an advanced synthetic data generation tool built on the CARLA simulator. SimBEV2X automatically creates randomized driving scenarios to collect multi-modal sensor data alongside various types of ground truth including 3D bounding boxes with unique track IDs, HD map information, BEV segmentation maps, and semantic occupancy voxel grids from both vehicles and RSUs. We also present the SimBEV2X dataset, the largest V2X perception dataset to date. The dataset comprises 258 scenes, each involving up to 8 connected vehicles and up to 4 RSUs across a variety of road networks. The SimBEV2X dataset is an order of magnitude larger than existing V2X datasets and contains 102,200 frames, 588,520 lidar point clouds, more than 3 million images, over 27 million bounding boxes, and a comprehensive set of other annotations. Finally, we establish a strong baseline on the SimBEV2X dataset using CoopDet3D and propose CoBEVFusion, a novel architecture that combines CoopDet3D with fused axial attention (FAX) for context-aware multi-agent feature aggregation, resulting in superior performance. SimBEV2X, the SimBEV2X dataset, and CoBEVFusion are available at https://simbev2x.org and https://github.com/GoodarzMehr/SimBEV2X.

Many recent robot policies pursue stronger control by using large pretrained vision-language models (VLMs) as the action backbone. We introduce WorldDiT, a unified diffusion transformer architecture that couples action generation with visual world modeling and achieves strong performance without a large pretrained VLM action backbone. During training, a single diffusion transformer generates continuous action chunks and predicts normalized RGB patch targets from future camera frames. Across four LIBERO simulation suites, WorldDiT lies on the reported Pareto frontier for total model parameters and mean success among methods reporting all four suites. These results provide a strong sub-billion-parameter baseline for future scaling studies.

Human-Robot Collaboration (HRC) in shared physical spaces using Augmented Reality (AR) interfaces is powered by Simultaneous Localization and Mapping (SLAM). Existing multi-agent SLAM systems rely on an edge server to combine visual findings of multiple resource-constrained agents, perform computation, and schedule updates to their local maps. However, the edge treats all agents uniformly and ignores the fundamentally different latency requirements of heterogeneous HRC agents: robots and head-mounted AR users. This uniform resource allocation often results in high lag for user manipulation, as it does not meet the stringent latency requirements of AR. In this work, we design, implement, and evaluate SHARE, a user-centric SLAM system that strategically prioritizes AR user experience while maintaining accurate tracking performance for robots. SHARE builds a first-of-its-kind experience model for HRC agents and adaptively adjusts transmission priorities to match it. To reduce end-to-end latency, SHARE leverages the redundancy of visual features acquired by agents in shared human-robot workspaces to reduce computation time induced by edge-based processing. Real-world deployment with commercial AR headsets and a ground robot achieves 13.22 ms average latency for AR users (43.3% reduction from baseline) while maintaining sub-2-centimeter tracking accuracy. User studies further reveal statistically significant improvements in user perception.

This exploratory study examines whether a large multimodal language model, GPT-5.1, can serve as the high-level controller of a physical mobile robot despite having no prior embodiment, no training in simulated environments, and no exposure to sensorimotor experience. Using only low-resolution first-person images and a discrete action set, the model was tasked with navigation and object-directed behaviors such as locating and contacting a target toy. Across multiple trials, GPT-5.1 demonstrated emergent capabilities that suggest elements of spatial reasoning and physical understanding. These included maintaining short-term memory of object locations after they left the camera frame, inferring the physical consequences of its own movements, and executing coherent action sequences such as colliding with an object and reversing to visually verify the outcome. At the same time, the model displayed inefficiencies and perceptual limitations, including imprecise alignment strategies and occasional misidentification of distant distractors. Overall, the results indicate that GPT-5.1 exhibits signs of world-model-like behavior in an embodied setting, despite the absence of any embodiment-related training, a finding that challenges long-standing views in cognitive science and robotics which hold that a physical body is a necessary prerequisite for developing such forms of intelligence. The findings motivate deeper investigation into the emergence, limits, and robustness of physical understanding in large language models.