Papers

Control methods for emerging vehicle chassis architectures are important for autonomous driving near handling limits. Unlike conventional drift control, which relies on mechanical steering and rear-tire saturation, a steering-free four-wheel independently driven (4WID) vehicle can generate direct yaw moment through differential wheel torques. This paper proposes a differential-torque drift control method for such a vehicle. A double-track vehicle model incorporating four-wheel differential actuation is established, based on which a drift-equilibrium calculation method and a closed-loop drift controller are developed. The proposed approach is validated through simulations and experiments on a 1:10-scale vehicle. The results show that the vehicle can achieve steady circular drifting with a sideslip angle of approximately 20$^\circ$ and perform figure-eight drift tracking. This study demonstrates the feasibility of drift control using only differential wheel torques and provides a new perspective on near-limit control for steering-free vehicle architectures.

Approaching a target position and holding station in flowing water is a fundamental and critical capability for robotic fish operating in natural aquatic environments. Despite decades of advances in enhancing swimming efficiency and maneuverability, this capability remains underdeveloped, largely owing to the insufficiently characterized, highly nonlinear fluid-structure interactions inherent to freely swimming robotic fish in flows. To bridge this gap, we propose the SWiFT framework, a Swimming With Flow Toolbox that enables the efficient exploration of an egocentric station-holding policy for a body and/or caudal fin (BCF) robotic fish in unknown and turbulent background flows via reinforcement learning (RL). Our SWiFT integrates a free-swimming flow-tank experimental setup with a highly efficient, physically consistent computational fluid dynamics (CFD)-based simulator and a systematic sim-to-real transfer pipeline. The resulting policy achieves substantial improvements over state-of-the-art methods across all metrics, most notably root-mean-square error (RMSE) of distance. Furthermore, we validated that egocentric feedback alone, without any explicit flow sensing, enables station-holding in unknown turbulent flows, closely mirroring the biological phenomenon of rheotaxis. Accordingly, the success of this egocentric station-holding policy not only advances robotic fish control toward real-world deployment, but also highlights SWiFT's promise as a foundation for tackling complex swimming tasks for underwater robots.

Autonomous laboratories automate experimental execution, but a campaign must also decide which recovery pathway merits optimization. We formulate this as a sequential decision problem with a discrete pathway-identification stage and a continuous within-pathway optimization stage under heterogeneous experimental costs. Our implementation, Coactive learning, combines a cost-sensitive Bayesian hypothesis-discrimination policy motivated by EC2 (Golovin et al., 2010) with Gaussian-process Bayesian optimization (Srinivas et al., 2010). Under explicitly stated assumptions, the expected spend of one fixed-budget campaign attempt is bounded by the expected pathway-identification cost plus the capped within-pathway optimization budget. We evaluate the method on synthetic benchmarks constrained by selected results reported for PNNL's CICERO selective-precipitation study (Ritchhart et al., 2026). The method performs comparably to an oracle-pathway Bayesian-optimization reference and to a strong split-plate baseline that discriminates pathways with its first plate, without receiving an oracle label for the correct pathway. It is given a candidate hypothesis space and a diagnostic likelihood model. On an NdFeB-inspired instance, it avoids the simulated penalty of a commit-first baseline that initially selects a plausible but inferior hydroxide pathway. This hypothetical wrong-first-commitment scenario is motivated by the hydroxide-oxalate performance contrast reported by CICERO. We characterize the sensitivity of these conclusions to the assumed cost model. The code and benchmark are open source.

Trajectory tracking performance of Uncrewed Aerial Vehicles (UAVs) degrades during an agile high-speed flight due to the depletion of the battery and subsequent loss of maximum available thrust. In applications such as drone racing, this leads to a failure to complete the race due to possible collisions with obstacles. In this paper, we present a novel method for integrating battery and propulsion system models into a Nonlinear Model Predictive Controller (NMPC) framework to enable real-time prediction of the voltage, current, power, and maximum available thrust of the platform. Our proposed approach achieves lower trajectory tracking error as a result of its real-time thrust awareness, and with the help of trajectory replanning, it allows the UAV to fly in time-optimal regime throughout the mission. The accuracy of this proposed model was verified in real-world flight experiments, while the effectiveness of the replanning algorithm was evaluated in simulation. By the end of the battery capacity, compared to an unaware controller, our novel controller achieved a 25% reduction in mean position error without replanning, and an 88 % reduction with replanning.

A robot carrying a persistent, behavior-annotated map faces two very different planning questions, and its memory answers only one of them well. The spatial-navigation question - how to walk around a room - we address first, and report a negative: building on Vision-Language-Motion Maps (VLMM), a behavior-aware planner cost cuts a planning-time objective by ~35% over 28 AI2-THOR scenes, but under closed-loop execution the benefit nearly vanishes (~4%) and an on-demand vision-language model (VLM) does as well. The resource-allocation question is different: under a limited perception budget, what should the robot attend to right now to keep its own map fresh? Framing re-perception as this attention decision, we show a persistent map's memory - change-history, or even just recency of last sighting - yields the best of the re-perception schedules we test (held-out), while the memoryless category prior is the weakest of them under the sqrt-law schedule – though under a Whittle index it leads memory until heterogeneity is real. The gain grows with per-instance heterogeneity as a Cauchy-Schwarz bound predicts, tracking Var(sqrt(lambda)), the variance of root-volatility, and reallocates budget toward the important objects the schedule protects; against a real CLIP movability prior it is +21-26%, of which roughly half survives once that prior's saturated scale is calibrated (+7-13%). The map's full combination earns its keep when the task is language-conditioned: told what to keep track of, VLMM grounds the relevant objects (open-vocabulary) and tracks their change (memory), beating a relevance-weighted recency baseline (+2.9% over 26 queries, at full heterogeneity; the ordering reverses when instance rates track category norms) - and a category prior (+9.2%). The map earns its keep not by telling the robot how to walk around a room, but by telling it what to pay attention to.

While vision-language-action models have demonstrated impressive zero-shot manipulation capabilities, they remain fundamentally black box policies that are difficult to interpret, adapt, or correct when they inevitably fail. In this work, we propose ARCHITECT, a framework that treats robot policy acquisition as an interactive program synthesis task. ARCHITECT leverages the reasoning capabilities of LLM coding agents to synthesize modular robot programs that utilize a suite of perception and control tools. Unlike end-to-end models where distribution shift leads to unpredictable, cascading failures, our modular architecture allows users to isolate failures and localize feedback at the level of abstraction required. We introduce an iterative process where a human supervisor provides natural language corrections to steer the policy. These corrections are grounded in the policy code by program execution traces and distilled into a persistent skill library, a form of long-term in-context learning which enables the agent to accumulate a repertoire of reusable, interpretable behaviors. In a benchmark evaluation on a Franka Panda robot, ARCHITECT outperforms state-of-the-art VLA models and program synthesis baselines on complex, long-horizon tasks, including articulated object manipulation and cloth folding. Our results demonstrate that the synthesized skill library enables the system to transfer to novel tasks with decreasing human intervention, providing a steerable and data-efficient alternative to black-box robot learning. Website: https://robo-architect.github.io/

We present $N_0$-TWAM, a tactile-native world-action model for contact-rich manipulation that predicts both future vision and future contact. To our knowledge, it is the first tactile world-action model trained at large scale, and it shows strong capability on contact-rich tasks. We pre-train $N_0$-TWAM at large scale with visuo-tactile joint training over tactile-rich demonstrations spanning six embodiments and 450 tasks. We use NeoForce, a unified force-based tactile representation, to form a physically grounded contact signal that conditions action generation. To improve long-horizon and multi-stage manipulation, we introduce tactile contact events for task staging and advance through them during execution. For real-time efficiency, we adopt an asymmetric Mixture-of-Transformers architecture that pairs a full-width expert for video prediction with slim experts for downstream action and tactile prediction. Evaluations on both real and simulated benchmarks justify the capabilities of $N_0$-TWAM across a range of contact-rich tasks, and demonstrate the benefit of data scaling for precise tactile and action prediction. In summary, $N_0$-TWAM endows a world-action model with predictive capabilities to foresee vision, touch and action, building a solid foundation for fine-grained manipulation on open contact-rich tasks. The codebase and model checkpoints will be made publicly available to foster further research and development in tactile-enabled robotic manipulation.

We present $N_0$-VTLA, a vision-tactile-language-action (VTLA) foundation model capable of (1) fine-grained contact-rich manipulation with tactile perception and tactile-feedback control, and (2) offline policy improvement from stored deployment data. Building on current vision-based backbones, we propose a training recipe for tactile integration consisting of visuo-tactile pre-training, staged tactile-pathway integration, and advantage-conditioned offline policy improvement. During pre-training, the policy learns broad contact priors from NeoData, our large-scale visuo-tactile robot dataset; to our knowledge, $N_0$-VTLA is the first VTLA model pretrained on tactile data at scale. During post-training, we augment the policy with a predictive tactile pathway that distills the contact patterns learned at scale into the fine motion adjustments required by downstream tactile-centric manipulation. For offline policy improvement, we introduce ALTER, an advantage-conditioned offline reinforcement learning method that converts relative progress and trajectory-event comparisons into binary advantage labels for policy training on a fixed deployment corpus, further improving task-specific learning on contact-rich skills such as deformable object manipulation. Across contact-rich benchmarks, $N_0$-VTLA outperforms strong baselines by wide margins: it wins all nine real-robot NeoReal tasks and reaches 63.8% mean success on a twenty-task simulation suite, against 44.0% for the strongest baseline. $N_0$-VTLA policies trained with ALTER reach 75-95% success on three long-horizon real-robot tasks. These results lay a foundation for versatile tactile-driven manipulation policies.

Robust and accurate pose estimation with multi-modal sensors is fundamental for autonomous vehicles and mobile robotic systems in complex environments. In this paper, we propose DAP-Pose, a unified end-to-end model for robust multi-modal pose estimation. DAP-Pose introduces a Bi-level Cross-modal Fusion (BCF) module that captures complementary semantic and geometric motion cues from visual, inertial, and GNSS measurements. To handle temporal offsets, we designed a Deep Temporal Alignment (DTA) module that explicitly aligns asynchronous streams in latent space, enabling coherent motion modeling without strict hardware synchronization. Furthermore, we incorporate physics-aware constraints via manifold geometry and GNSS-guided absolute metric scale, enforcing motion consistency and mitigating drift. Experiments upon the public KITTI benchmark dataset were conducted to evaluate the performance of DAP-Pose against existing methods. DAP-Pose achieved the state-of-the-art performance, with the lowest average translation error ($t_{rel}$) of 1.31% and rotation error ($r_{rel}$) of 0.46$^{\circ}$. Furthermore, it accurately estimates poses and maintains robust performance under severe artificially injected temporal misalignment.

Autonomous navigation across large off-road environments remains a challenging problem. Onboard sensors perceive only the immediate surroundings, yet safe and efficient routes depend on terrain features that extend well beyond the sensor horizon. Geo-spatial data sources such as satellite imagery, aerial LiDAR, and vector maps can close this gap, but learning traversability from them is difficult: dense labels are unavailable at scale, and existing methods rely on short-range sensing. We propose an efficient formulation that learns a continuous traversability map from overhead data, supervised directly by human-driven GPS trajectories and shaped by supervised geometric priors from LiDAR. Alongside the model, we release a dataset, curated from public sources, consisting of 299 scenes spanning $\sim\!1{,}244\,\mathrm{km}^{2}$ of diverse terrain, paired with $1{,}130\,\mathrm{km}$ of human driving. In field trials on a Clearpath Warthog across seven routes at two sites,our method achieves trajectories within $5.5\%$ of human path length and reduces operator interventions by $\sim\!85\%$ compared to local-planner-only autonomy.

Exploration in sparse-reward long-horizon tasks poses significant challenges for reinforcement learning. To address these challenges, we propose a two-level Hierarchical Reinforcement Learning (HRL) framework. The first level handles high-level strategic planning, while the low-level uses the continuous-control Soft Actor-Critic (SAC) algorithm, and they utilize entropy-regularized policy optimization. The proposed framework was trained and evaluated using the Search-and-Rescue-2 (SAR-2) dataset. HRL-SAC effectively addresses sparse-reward long-horizon search problems characterized by delayed rewards and continuous control, and its outperforming the flat SAC baseline reinforcement learning in terms of success rates, coverage efficiency, and convergence. These findings indicate that hierarchical entropy-regularized policies are a promising solution to tackle long-horizon sparse-reward reinforcement learning tasks.

The deployment of embodied agents in self-driving laboratories could accelerate scientific discovery, yet their reliability is constrained by the irreversible and safety-critical nature of chemical experiments. Progress is further hindered by scarce failure data and the lack of fine-grained evaluation protocols. To address these challenges, we introduce LabRobFail, a failure-centric framework for learning and evaluating robotic failure analysis in chemical laboratories. LabRobFail-Sim injects controllable failures at the control, physics, and semantic levels, enabling the construction of LabRobFail-Data, which contains over 20,000 trajectories across 70+ task scenarios, five failure categories, and 11 fine-grained failure types. LabRobFail-Bench evaluates six capabilities spanning task understanding, failure detection, temporal localization, severity assessment, failure classification, and actionable correction. We further develop LabRobFail-VLM, a domain-specialized vision-language model that generates structured failure diagnoses and recovery instructions. On seen environments, it achieves 90.83% failure-detection accuracy and 77.21% temporal-localization accuracy, substantially outperforming general-purpose VLMs. When integrated as a real-time supervisor, it improves downstream task success rates by 4-16 percentage points, demonstrating the value of fine-grained failure understanding for closed-loop recovery and reliable laboratory autonomy. Our code and data are available at https://github.com/Su-ISE-2001/SciRobo

Manipulating objects with hidden internal state, such as a latched microwave, forces a robot to probe before it can act. Yet a robot that has solved an instance once re-runs the same probes whenever it encounters that instance again, because existing cross-episode memories target task success and organize reuse around states, not the object or the cost of re-exploring it. We present Instance-Oriented Memory (IOM), an object-centric framework that amortizes this exploration: from a single encounter that uncovers the hidden state, whether or not it succeeds, IOM records a short procedure for manipulating that instance, keys it on the object's identifiable features, and injects it as a soft bias on a procedure-conditioned policy. A later encounter recognizes the object and recalls its procedure instead of re-exploring. We instantiate this distillation with an off-the-shelf vision-language model (VLM) that parses each encounter into the procedure without task-specific training. Across four articulated-object tasks, two in simulation (microwave, door) and two on a real robot (bottle, cabinet), an oracle procedure memory cuts manipulation operations by 16-30% over re-exploration at non-regressing success, and the VLM instantiation recovers 69-88% of that saving out of the box. Because the procedure is a soft bias on a feedback-driven policy, an incorrect memory is recovered from rather than obeyed: success holds even when a retrieved procedure is wrong, as for $\approx$12% of door instances. Across all tasks the benefit is purely one of efficiency: success never regresses, and on the real robot even improves. Code will be released upon acceptance.

Conventional frame-based imaging for active stereo systems has encountered major challenges in fast-motion scenarios. However, how to design a novel paradigm for ultrafast depth sensing remains an open issue. In this paper, we propose a novel problem setting, namely active event-based stereo vision, which attempts to integrate binocular event cameras and an infrared 2D pattern projector for high-speed dense depth sensing. Technically, we first build a stereo camera prototype system and present a real-world dataset with over 21.5k spatiotemporal synchronized labels at 15 Hz, while also establishing a realistic synthetic dataset with stereo event streams and 23.8k synchronized labels at 20 Hz. Then, we propose ActiveEventNet+, a lightweight yet effective event-based stereo matching neural network that learns to generate high-quality dense disparity maps from stereo event streams with low latency. Our ActiveEventNet+ mainly involves three innovations: incorporating lightweight blocks into event-based stereo matching frameworks, designing a novel cost volume with dynamic interactions between stereo pairs, and presenting an effective temporal consistency architecture to fully use rich temporal cues in event streams. The results show that our ActiveEventNet+ outperforms state-of-the-art methods while significantly reducing computational complexity. Our solution offers superior depth sensing performance compared to conventional frame-based stereo cameras in high-speed scenes. In particular, the lightweight ActiveEventNet enables the prototype system to achieve real-time processing at speeds up to 150 FPS. We believe that this novel active event-based stereo vision paradigm can provide new insights into the design of future high-speed depth sensing camera systems. Our dataset and code can be available at https://github.com/jianing-li/active_event_based_stereo.

Robust object 6D pose tracking is critical for robotic systems operating in dynamic and occluded scenes. Per-frame estimators are accurate but computationally expensive, while current trackers struggle with fast motion and complete occlusion due to their reliance on continuous visibility. To address these challenges, we present RRTrack, an efficient, recoverable object 6D pose tracker that enables robust tracking through fast motion and target disappearance–reappearance. RRTrack introduces a 2D–6D closed-loop tracking strategy that integrates memory-based video object segmentation (VOS) with 6D pose refinement. The 2D branch maintains target localization, and the 6D branch verifies geometric consistency before memory updates. In addition, a DINOv2-based dual-bank template matching module is developed to recover lost targets by jointly exploiting offline synthetic templates and online observation anchors while maintaining real-time efficiency. We also introduce a synthetic RGB-D benchmark comprising three robotic scenarios with fast motion and full occlusion. Experimental results on the synthetic benchmark demonstrate that RRTrack improves equal-subset mean ADD-S AR by 66.3% and ADD-S AUC by 65.7% over FoundationPose while achieving 55.2 FPS. Real-world experiments further validate the robustness of RRTrack under noisy sensing conditions. Project page: https://github.com/7kevin24/RRTrack

This paper develops an observer-assisted control architecture for 3D trajectory tracking of torpedo-type underactuated AUVs with non-minimum-phase sway/heave dynamics under unknown ocean currents. A three-stage state-current observer provides relative-velocity estimates to a nonlinear feedforward term for dominant current rejection and to an LMI-certified LPV-$\mathcal{H}_\infty$ correction layer. Feedback-linearising cancellation yields a constant input matrix, enabling convex synthesis without pairwise cross terms. A residual-level break-even law shows that the effective surge disturbance depends on current-estimation error, while a singular-perturbation analysis proves local practical uniform ultimate boundedness on the embedded LPV model. REMUS simulations over three trajectories and four current scenarios show 89-96% current-estimation reduction, about 99% translational residual reduction, and RMS tracking-error reduction from 4.04 m to 0.24 m.

Controllers based on sampling and latent world models assign a predicted terminal cost to each candidate action sequence, choose the minimum, execute its first action block, and replan. This rule can fail even when the terminal cost perfectly and accurately reflects the true task objective in the physical world. Residual prediction error can give an infeasible sequence an anomalously low cost, and a larger proposal pool gives such errors more chances to outrank feasible alternatives. We call this conditional failure proposal overgeneration. In Cube candidate execution audits, increasing the total proposal budget from 72 to 288 reduces the feasibility of selection by minimum latent cost from .375 to .062 for position targets and from .344 to .031 for targets defined by position and yaw, although every larger pool contains a feasible sequence. We introduce Adjacent Set Action Reconstruction (ASAR). Among proposals with low cost, ASAR identifies an adjacent set using standardized early action prefixes and reconstructs a full action sequence through locally weighted aggregation with a light anchor from the sequence with minimum cost. On a Carry and Release evaluation set of 75 queries, Kernel ASAR improves event completion success over matching selection by 28.0, 24.0, and 18.7 percentage points under latent cost and by 18.7, 20.0, and 17.3 points under a trajectory reachability cost at 72, 144, and 288 proposals. Analysis of finite proposal pools characterizes selection risk from the lower tail, separation by a related radius support statistic, and sequence containment under an explicit local feasibility condition.

Safe quadrotor navigation in cluttered and dynamic environments depends not only on instantaneous geometric perception, but more critically on anticipating collision risks induced by relative motion. Conventional modular pipelines frequently suffer from perception latency, while end-to-end learning methods relying on implicit scalar rewards often struggle to extract reliable spatio-temporal features without physics-grounded supervision. To address this, we propose an anticipatory risk-guided reinforcement learning framework. Leveraging privileged simulator states, we construct a directionally aligned future collision risk map based on the Closest Point of Approach (CPA). Through an asymmetric actor-critic architecture, the network is trained to self-predict this structured risk, which explicitly guides the visual policy during deployment. A lightweight spatio-temporal encoder extracts motion cues directly from onboard depth sequences, bypassing explicit object tracking or optical flow estimation. Extensive simulated and real-world experiments demonstrate that our method effectively improves safety margins and flight efficiency in dense dynamic clutters compared to existing baselines. Furthermore, the learned policy achieves robust zero-shot Sim-to-Real transfer on a physical quadrotor, relying purely on abstracted spatio-temporal depth sequences and its self-predicted risk priors, validating the effectiveness of our approach and its robust generalization from simulation to reality.

Swarms of LLM-assisted autonomous robots are increasingly proposed for cooperative intelligence, surveillance, and reconnaissance (ISR) in contested environments. A growing class of their assurance failures arises not within any single platform but across the swarm: individually-compliant actions compose into a mission-level violation: a prohibited objective split across platforms to evade per-platform limits, or a collective budget quietly exceeded. Per-platform guardrails miss these by construction, and contested communications let the violation hide behind lost or delayed evidence. We present a three-tier (platform/squad/mission) compositional runtime-verification framework that decomposes a mission policy into per-agent and cross-agent aspects, aggregates per-platform verdicts over a verification-aware messaging fabric, and fuses them with an evidence-aware, two-axis (security x completeness) algebra whose provenance names the platforms that jointly triggered a violation. Because the fabric makes evidence loss and silence observable, unsupported negative verdicts are downgraded to an explicit unknown rather than reported as mission-wide all-clears. On a simulated ISR mission, an indirect prompt injection that causes real LLM planners to split a prohibited collection task across four platforms is invisible to every per-platform monitor yet detected compositionally with full provenance; under an injected fault campaign a best-effort central monitor emits silent false all-clears while the verification-aware fabric emits none.

Long-horizon manipulation tasks pose significant challenges for reinforcement learning due to sparse reward signals and long horizons. Automatic curriculum learning (ACL) has been proposed to tackle these challenges by progressively training agents on a sequence of tasks, from easier to more difficult. However, the success of ACL depends heavily on task-dependent specifications-such as well-defined task parameter spaces and difficulty measures-which are often manually crafted and difficult to generalize across diverse tasks. Recent advances in large language models (LLMs) offer a promising alternative by enabling the decomposition of complex tasks into meaningful subtasks using the LLMs' web-scale common-sense knowledge. This decomposition can provide a natural curriculum structure for efficient learning of long-horizon tasks. However, existing LLM-based methods typically rely on hand-designed dense reward functions to learn each subtask, which can introduce bias and still requires significant human supervision. In this work, we propose LLM-enhanced automatic curriculum learning (LEACL), a framework that integrates LLMs and ACL to address these limitations. Specifically, LLMs are used to both decompose tasks into subtasks and to generate task-dependent specifications for each subtask. These specifications are then used by ACL algorithms to guide learning using only sparse reward signals, eliminating the need for dense reward design. We evaluate LEACL on five long-horizon manipulation tasks from the LIBERO benchmark. LEACL achieves better asymptotic performance in terms of the success rates compared to human-designed dense rewards.

Robot policies map observations to actions, typically using multilayer perceptrons (MLPs). Yet robot dynamics and control objectives involve multiplicative interactions among observable physical variables. MLPs can approximate these interactions but must learn them implicitly, at a representational cost. We introduce PRISM (Polynomial Representations for Interaction Structured Motor Control), a physics-motivated yet data-driven representation that learns multiplicative interactions by recursively adding scaled bilinear features, without enumerating all polynomial terms. Replacing only the MLP's first affine layer, PRISM is plug-and-play for reinforcement and imitation learning, requiring no changes to training objectives, sensing, or controllers. Across humanoid locomotion and contact-rich manipulation, PRISM improves survival from 51.0% to 92.5%, outperforming even larger MLPs. More strikingly, its performance advantage persists under out-of-distribution changes in friction, robot mass, and payload, without retraining. PRISM also exhibits sensorless compliance-like behavior, increases failure-recovery success from 40.9% to 52.3% without explicit admittance control, improves real-robot manipulation, and learns features that better predict physical quantities. These results make PRISM a compelling alternative to standard MLPs for robot policy learning. The project page is available at https://lsh3163.github.io/prism/.

This paper presents a motion planning framework that unifies equality and inequality constraints within a single geometric formulation for sampling-based planning in high-dimensional robotic systems. In conventional sampling-based planners, equality constraints are typically enforced through projection, whereas inequality constraints are handled separately through binary validity checks such as collision testing, often leading to inefficient exploration. To address this limitation, we propose Riemannian Barrier Metric RRT (RMRRT), which constructs a unified local geometry for planning on equality-constrained manifolds. RMRRT first builds an ambient barrier metric from inequality-sensitive barrier terms and then induces a tangent-space metric via a (G)-orthogonal projection associated with the equality constraints. The resulting tangent-space metric is used consistently in both steering and nearest-neighbor selection, biasing exploration away from nearby inequality boundaries while preserving first-order equality consistency. In this work, the metric is instantiated from signed-distance-based geometric proxy inequalities to provide collision-informative tangent-space directions; hard feasibility is enforced separately through standard validity checks. Experimental results show that RMRRT achieves a 100% success rate across diverse constrained manipulation tasks in both simulation and real-world settings, while reducing planning time relative to representative constrained planning baselines. Ablation studies further demonstrate that the proposed metric improves exploration quality by reducing rejected samples and shortening path length. Experiment videos and source code are available at: https://rmrrt-anonymous.github.io

Internal self-consistency cannot certify the accuracy of a photogrammetric reconstruction, and the failure is structural rather than a matter of tuning. This matters because hold-out self-validation scores are increasingly offered as quality evidence for metric deliverables whose correctness is otherwise unknown without an external survey. We formalise a track-leakage-free hold-out protocol: a deterministic image subset is withheld, and each withheld view is re-localised against only those 3D points supported by two or more retained images, so no view is tested against structure it helped create. We evaluate it on five GNSS-referenced captures across four sites, 13 ETH3D scenes, a EuRoC flight and 30 IMC 2025 scenes. The protocol is well-posed but does not measure accuracy. It saturates: the internal confidence score stays pinned at 1.00 while true error swings 14.1x within one capture. It is blind to coherent distortion: fragmenting corruption is caught, but internally self-consistent, globally distorted models are not, and were wrong by 55-106 m at confidence 1.00 at three of four captures. On IMC 2025 it separates failed from successful reconstructions (rho = 0.68) yet ranks nothing among the successful (rho = 0.01). Track-leakage-free hold-out measures internal geometric consistency: a fragmentation warning, not a substitute for control-point accuracy assessment.

Data association between landmark measurements and landmark variables has long been a central challenge in SLAM, as estimation accuracy depends critically on associating measurements with the correct landmark variables. Recent advances in deep learning have created new opportunities for the problem; data association can now leverage not only positional measurements but also semantic information about object landmarks, such as class labels from neural object detectors and feature vectors from visual foundation models. In this paper, we present a generalized data-association-free SLAM framework that jointly estimates data associations, robot poses, landmark positions, and landmark semantics from odometry, and positional and semantic measurements of landmarks. The proposed framework (i) creates a synergy between data association and landmark semantics estimation; (ii) adopts a semi-incremental estimation scheme for improved accuracy and computational efficiency; and (iii) provides a principled justification, guidelines, and heuristics for landmark-number estimation, improving the interpretability and practical usability of the framework. The proposed framework and algorithms are evaluated on synthetic and real-world datasets with two types of semantic information, class labels and real-valued feature vectors, and demonstrate superior performance compared to strong baselines.

Elastic object manipulation (EOM) involves highdimensional, nonlinear, and elastic deformations. The diverse deformation properties of elastic objects substantially expand the relevant state space, requiring extensive exploration to learn accurate manipulation policies for tasks such as slingshot manipulation. While simulation enables large-scale and safe exploration compared to costly and potentially destructive real-world trials (e.g., repeated projectile launches), accurately calibrating elastic behavior between the real world and simulation remains challenging since elastic properties are largely indistinguishable from visual observations alone. To address these challenges, we propose Sling2Sim2Real, a one-shot Real2Sim2Real framework that identifies elastic parameters from a single non-destructive interaction and enables policy learning in simulation. The framework consists of two stages: 1) a multi-start Real2Sim system identification method that exploits parameter covariance to estimate elastic properties, and 2) simulation-based policy learning followed by zero-shot Sim2Real transfer using the calibrated simulator. We evaluate Sling2Sim2Real on a slingshot manipulation task using a Franka Emika Panda arm and elastic bands with diverse physical properties across varying target distances. Experimental results demonstrate that Sling2Sim2Real achieves accurate policy learning and robust generalization while significantly reducing the amount of required real-world interaction.

Large language model (LLM)-based dialogue systems suffer response delays because generation begins only after final speech recognition. While fixed fillers are a workaround, they become unnatural over time. We propose a two-stage incremental framework that decouples prefatory-response preparation from speech onset. Once user intent becomes predictable, an intent readiness detector triggers LLM-based generation of a short prefatory response. Concurrently, a voice activity projection (VAP) model determines when to deliver it. Through a field experiment with a route-guidance robot in a shopping mall, we evaluated three conditions: no-filler, fixed-filler, and contextual-preface. Both fixed-filler and contextual-preface significantly reduced initial response latency relative to no-filler. Relative to fixed-filler, contextual-preface had significantly longer initial response latency but a significantly shorter initial-to-main gap. Exploratory ratings showed no significant differences. These results indicate a timing trade-off.

While scaling laws for imitation learning have primarily focused on generalization in open-world settings, the relationship between data and precision in closed-world tasks like robotic assembly remains largely unexplored. This paper systematically investigates this relationship and introduces a novel scaling law. We find that to achieve a fixed success rate, the required number of demonstrations $N$ grows super-exponentially as the target precision $P$ approaches a limit $c$. This relationship is accurately captured by the model $\log(N) \propto 1/(P-c)$. Crucially, we reveal that the limit precision $c$ is not a static physical constant of the task but an emergent property of the entire agent system, including its sensors and expert policy. Through experiments on canonical manipulation tasks, we validate this law and demonstrate that improving system components, such as adding a wrist camera or using a more effective expert, measurably lowers $c$, thus expanding the system's achievable precision. Our work provides a new theoretical framework for precision in robotics and a quantitative metric to evaluate system capabilities. Furthermore, these findings provide a practical methodology for guiding the development and debugging of high-precision manipulation systems.

AI is evaluated through knowledge, reasoning and plan generation, yet scientific agency requires reliable physical action and adaptation to evidence. Here, we use a robotic chemistry laboratory as a physical-world testbed to make scientific agency measurable. Its 45 modular workstations exposed as machine-readable skills enabled 4,608 trials. Only 3.3% of trials produced expert-assessed executable workflows under laboratory constraints; even the best system achieved 28.1%. Long-horizon planning remained a challenge: only three executable workflows exceeded 30 operations, although the longest contained 44. Across five rounds, experimental feedback prompted local adjustments but no workflow-level replanning or analytical-method redesign. By making physical executability and evidence-driven replanning measurable, our study provides an evidence-based assessment of deployment readiness and a diagnostic framework to guide closed-loop improvements towards physically grounded autonomous research.

This work proposes an actuator-aware spatiotemporal tube (STT) synthesis framework to accomplish temporal reach-avoid-stay (T-RAS) tasks for an unknown nonlinear multi-input and multi-output (MIMO) system under actuator constraints. Existing STT synthesis methods address actuator saturation after the tube generation either through repeated online re-optimization or controller redesign. Instead, the proposed framework incorporates actuator constraints directly into the tube synthesis process. The STT centerline and width are parameterized using Bernstein polynomial basis functions, whose convex-hull property enables sample-free enforcement of geometric and derivative constraints. By analyzing the worst-case closed-loop error dynamics of an approximation-free prescribed performance controller (PPC) used for STT tracking, we derive a linear actuator feasibility constraint. The constraints are embedded directly in terms of the tubes' Bernstein control points into the STT synthesis optimization for actuator-feasible tube generation, eliminating the need for online re-optimization or controller redesign. A simulation study on an omnidirectional mobile robot performing a T-RAS task shows that the proposed framework adheres to the prescribed actuator limits throughout the task and reduces required control effort by approximately $50\%$ compared with an existing STT synthesis method.

Language agents can now interact fluently with users in software, but robots still struggle to bring comparable interaction to physical tasks. Current robot-control paradigms, including vision-language-action policies and world-model-based planners, are mainly optimized for instruction execution, leaving users with little visibility into why an action is chosen and few mechanisms to redirect, correct, or teach the robot through interaction. To solve this problem, we present the World-Cognition Model (WCM), a human-centered embodied agent built on the SLAK architecture (Sensing, Logic, Action, and Knowledge) and an asynchronous runtime. SLAK separates perception, reasoning, control, and memory, while the runtime allows reasoning, dialogue, and execution to proceed concurrently. WCM further introduces a human-in-the-loop teaching mode that enables users to interactively teach the robot difficult or long-horizon tasks. Teaching episodes and autonomous task rollouts are refined into chain-of-thought supervision to continually improve the model. WCM achieves a 73.8% average success rate across nine real-world human-robot interaction tasks, including tasks held out from CoT fine-tuning and a long-horizon task learned through teaching.