Papers

Precision nitrogen (N) management (PNM) for cotton requires in-season monitoring of crop growth parameters and N status indicators to decide fertilizer timing, placement, and application rates for optimal canopy development and yield. This study developed remote sensing and machine learning-based methods to estimate cotton dry biomass weight (DBW), plant N uptake (PNU), plant N concentration (PNC), critical N dilution (Nc), and nitrogen nutrition index (NNI) to support PNM. To achieve this, a three-year field-based N-management study was conducted and unmanned aerial vehicle (UAV)-based multispectral images were acquired between early vegetative growth and flowering stages, critical for fertilizer applications. Spatiotemporally consistent spectral and morphological plant features, including plant height (PH) and fractional canopy cover (FCC), provided reliable model training inputs. DBW, PNU, and PNC estimates from simple regression using vegetation indices (VIs), multiple linear regression (MLR) combining VIs, PH, and FCC, and decision-tree models, random forest regression (RFR) and extreme gradient boosting (XGB), combining spectral reflectance, PH, and FCC were evaluated using trial-held-out (THO) and leave-one-year-out (LOYO) validation methods. The best validation accuracies were from RFRTHO (R2 = 0.88 and MAPE = 23.14% for DBW; R2 = 0.84 and MAPE = 20.61% for PNU; R2 = 0.85 and MAPE = 7.82% for PNC) and XGBTHO (R2 = 0.87 and MAPE = 21.91% for DBW; R2 = 0.81 and MAPE = 21.40% for PNU; R2 = 0.86 and MAPE = 7.66% for PNC). Nc was calculated from model estimated DBW and PNC for high-yielding, medium-to-tall cotton varieties grown in the Texas Coastal Plains and validated using ground-truth biomass measurements. NNI derived from XGBTHO outputs performed marginally better than NNI from RFRTHO in identifying N-deficient plots and multi-level N-stress categorization.

Prediction intervals for multi-modal regression with tabular variables, text, images, or other input sources are difficult to calibrate when those sources disagree or one is missing. A single global quantile averages these regimes together instead of calibrating to the modality pattern observed at test time. We address this through a modality-aware conformal calibration layer. The layer trains or reuses one predictor per modality, computes a disagreement score from their predictions, and uses that score in split conformal calibration under a strict split protocol. We use the score in two complementary ways. First, a continuous disagreement-scaled method reallocates interval width across examples while preserving the usual marginal split-conformal guarantee. Second, a Mondrian (stratified) method calibrates within groups defined by disagreement or modality availability fixed before calibration, giving group guarantees under joint exchangeability of the calibration and test examples. Across four multi-modal datasets, the disagreement-scaled layer matches or improves the marginal conformal baseline in 59 of 60 paired runs for interval continuous ranked probability score (CRPS) and in 52 of 60 for interval width, while keeping empirical coverage near the 95% target. In stress tests with missing modalities, mask-matched recalibration recovers up to 19.5 percentage points of coverage in the hardest fixed-mask regime. The result is a simple, model-agnostic reliability layer for multi-modal regression systems. A project page is available at https://unco3892.github.io/modality-aware-conformal.

Open-weight large language models (LLMs) are increasingly developed through complex, multi-stage pipelines, leading to intricate lineage relationships that reflect model origin, ownership, and evolution. Understanding these relationships is important for model provenance, governance, and supply-chain integrity. In this work, we investigate the notion of LLM "biometrics" (analogous to human biometrics) to ask whether LLMs exhibit intrinsic fingerprints in weight space alone, without access to input data, that reveal their origin and lineage. We formulate this as a lineage discrimination problem, distinguishing among independent-origin, same-series, and shared-base models. To characterize these relationships, we propose a unified geometric fingerprinting framework that analyzes weight matrices from two complementary perspectives: (i) spectral energy, captured by singular value distributions to encode global magnitude patterns, and (ii) subspace alignment, quantified via subspace deviations to capture directional geometry. Our analysis uncovers a clear hierarchy of structural similarity in weight space: spectral energy reliably distinguishes independently trained models and different model families, while subspace alignment enables fine-grained discrimination among closely related models, including variations in dataset scale and post-training procedures. Extensive experiments on over 110 diverse open-weight LLM pairs demonstrate that weight-space geometry provides a robust and interpretable signal for model lineage, enabling coarse-grained regime separation and fine-grained discrimination within shared-base models.

We study policy-based reinforcement learning under the $\mu$-resets interaction protocol of Kakade and Langford [KL02]. This interaction protocol enables the learner to sample trajectories from a given exploratory reset distribution $\mu$, in addition to the starting distribution. We resolve the question raised by [KLS25] on the role of policy realizability for the sample complexity of this problem. Critically, the dependence on horizon $H$ is governed by the notion of coverage assumed of the reset distribution. Under bounded all-policy concentrability, we show a $\exp(\Omega(H))$ sample complexity lower bound; with bounded pushforward concentrability, we show the dependence on horizon is tightly characterized as $\exp(\Theta(\sqrt H))$.

Automated anomaly detection methods often report strong performance on curated academic benchmarks, but their behavior under real-world industrial conditions is less clear. In this work, we evaluate 19 unsupervised anomaly detection models on the BowTie dataset, a challenging manufacturing dataset with reflective surfaces, subtle defects, and profile-specific variation. In contrast to benchmark results, we observe that model performance is less stable than typically reported on standard benchmarks such as MVTec AD, highly sensitive to preprocessing, and inconsistent across conditions, with no single approach emerging as uniformly robust; a consensus audit further indicates that nominal-data quality affects deployment. Motivated by these findings, we developed and initially deployed a unified human-in-the-loop framework for manufactured-part inspection that combines image annotation, AI-assisted defect detection, and an integrated validation engine, replacing a prior manual visual inspection and documentation workflow. The system supports heatmap-guided defect review, SAM-refined candidate regions for inspector acceptance, rejection, or boundary adjustment, mask evaluation where annotations exist, and review history for inspector consistency and onboarding. Together, the results highlight the gap between benchmark performance and deployment reality, and provide a practical framework for addressing it.

Safe and efficient robot navigation in crowds requires anticipating pedestrian motion despite uncertain and potentially shifting prediction errors. Existing reactive methods can produce oscillatory behavior, while predictive planners often treat forecasts as exact or rely on restrictive error models. Incorporating conservative uncertainty sets as hard constraints can also render model predictive control (MPC) infeasible. We propose CoCoNav, a crowd-navigation framework that combines online conformal calibration with runtime-certified planning. A horizon-specific conformal proportional–integral controller adapts trajectory-error bounds to regulate long-run empirical coverage, enabling the framework to respond to changing prediction errors. A relax-then-verify planner preserves solver feasibility by generating nominal trajectories with soft-constrained MPC and separately certifying them, together with contingency maneuvers, against the calibrated bounds before execution. Simulations and quadruped experiments show that CoCoNav achieves a favorable balance among collision avoidance, task success, and navigation efficiency relative to the evaluated baselines.

Parameter-efficient fine-tuning enables the adaptation of vision foundation models to biomedical tasks under limited computational resources, but a single low-rank update can constrain all task-specific changes to one narrow parameter subspace. This restriction may prevent the model from simultaneously representing globally shared task structure and localized residual directions required for generalization to unseen imaging domains. We introduce LoRSA, a global–residual adaptation framework that jointly learns a dense low-rank component and a dynamically structured-sparse low-rank component. The dense component captures globally coordinated task adaptation, while the structured component provides complementary residual corrections whose support evolves during training. We characterize the representational capacity, approximation properties, rank structure, and singular-subspace complementarity of this decomposition. We evaluate LoRSA for four-class breast-density classification using DINOv3-Base, with VinDr-Mammo as the source domain and MammosighTR and RSNA as unseen external domains. LoRSA remains competitive on the internal validation set and achieves the best external macro-F1 on both target datasets, improving upon the strongest competing method by 2.15 percentage points on MammosighTR and 3.09 percentage points on RSNA. Weight-matrix analysis further shows that approximately $92\%$ of the energy of each adaptation component lies outside the bilateral singular subspace of the other, indicating that the two components learn largely complementary update directions. These results suggest that organizing adaptation capacity into distinct global and residual paths can improve the external-domain generalization of parameter-efficiently adapted biomedical vision models.

Long-horizon humanoid loco-manipulation requires composing versatile whole-body skills and reliable high-level decision making. Existing methods often coordinate pretrained skills with scripted planners, finite-state machines or task-specific model-free policies, restricting their ability to handle complex task sequences. To address this limitation, we propose LUCID, a hierarchical model-based reinforcement learning framework that plans over reusable skills through imagined rollouts of a learned dynamics model. LUCID first trains a structured latent-conditioned low-level policy via adversarial imitation and then freezes it while jointly learning a high-level policy and macro-dynamics world model. The world model predicts the temporally extended state transitions induced by latent decisions, enabling high-level policy optimization through imagined rollouts. We evaluate our framework across various simulated multi-object rearrangement scenarios. Experimental results show that LUCID improves the full-task success and partial-completion rates compared to prior baseline methods, demonstrating its effectiveness in complex sequential loco-manipulation tasks.

Graph Neural Networks (GNNs) are widely used across domains such as natural sciences, social network analysis, chip design, and recommendation systems. However, as graph sizes grow, storing and processing them entirely on a single-node CPU-GPU system becomes increasingly impractical. A promising approach is to distribute the graph across multiple remote memory nodes, though this introduces a major bottleneck: inter-node network congestion during training. To address this, we propose LGNNIC, a novel inter-node system architecture that leverages SmartNICs co-located with remote memory nodes-a configuration already available in modern systems-to reduce communication overhead in distributed GNN training. LGNNIC offloads key preprocessing tasks to SmartNICs, reducing the volume of data transferred to computational (training) nodes and alleviating network congestion. We introduce two complementary techniques executed on the SmartNICs during the preprocessing phase: Neighbor Sampling, which performs mini-batch sampling, and Quantization of the sampled batches. To evaluate LGNNIC under different communication infrastructures, we designed both an optimized low-overhead DMA-based synchronization mechanism and a high-overhead socket-based alternative used as a benchmark. We evaluate the core SmartNIC offloading mechanisms across standard GNN workloads and sampling hyperparameters using a proof-of-concept (PoC) system comprising one remote-memory node with an NVIDIA BlueField-2 SmartNIC and one compute node with an A100 GPU. Both Neighbor Sampling and Quantization on the remote node demonstrated substantial training speedups in most configurations. Neighbor Sampling achieved up to 62.4x and 17.5x speedups with Sockets and DOCA-DMA, respectively, primarily due to reduced data transaction time. Quantization provided additional speedups of up to 3.6x and 1.3x, respectively, by reducing data transfer.

Average-reward reinforcement-learning regret is known up to logarithmic factors, but the numerical content of published guarantees is difficult to compare because probability mode, structural parameter, logarithmic normalization, prior information, and planning assumptions differ. We introduce a constant-aware comparison protocol and derive an explicit finite lower certificate for communicating MDPs. The construction is a binary tree of two-state blocks; its proof uses exact trajectory-level Bernoulli KL divergence and keeps action budget, diameter, occupancy, navigation cost, and terminal bias explicit. A common closed-form envelope improves the published coefficient $0.015$ across a finite frontier: $0.0200$ in a moderate regime and up to $0.0291$ under stronger action, diameter, and horizon conditions, a $94\%$ increase. The limiting coefficient is $\frac1{32}\sqrt{(A-3)/A}$. For upper bounds, we give an auditable composition rule for a span-constrained optimistic learner, but do not claim a coefficient while adaptive directional-variance and planning certificates remain open. We also formalize valid expectation conversion and constant comparability. Controlled diagnostics test diameter dependence, bonus-by-width interactions, span misspecification, and the finite lower certificate on its exact family.

High-fidelity immersed-boundary simulation resolves the coupled motion of a deforming swimmer and its surrounding flow, but the resulting cost limits repeated evaluations for engineering design, parameter studies, and control. We develop neural-operator surrogates for temporal prediction of the hydrodynamic fields generated by planar and volumetric eel swimmers. The surrogates are trained on regular-grid fields exported from adaptive fluid–structure simulations and are conditioned on swimmer geometry and Reynolds number. The planar model jointly predicts two velocity components, scalar vorticity, and pressure. On five held-out high-Reynolds-number trajectories, its full-domain global relative L^2 error is 3.51 %. The volumetric formulation uses three target-specific models with a common multichannel input: one model predicts three-dimensional velocity, one predicts vorticity, and one predicts pressure. Their full-domain global relative L^2 errors on five held-out within-range trajectories are 3.44 %, 5.58 %, and 19.2 %. Together, the results demonstrate the feasibility of field-resolved neural surrogates for moving-boundary swimmer flows while identifying pressure accuracy and physical consistency as priorities for further development.

Offline reinforcement learning repeatedly trains policies from a fixed transition pool, making redundant data costly across seeds and hyperparameters, while naive subsampling can remove rare transitions needed for long-horizon credit assignment. We introduce CODS, a critic-guided selector that alternates between fitting an algorithm-matched critic and acquiring high-residual transitions before freezing a reusable subset. Unlike prioritized replay, CODS produces a static artifact; unlike one-shot residual selection, it refreshes scores as the critic changes. At a 10% budget, CODS retains 96.6% of eligible-pool performance across 20 valid D4RL task–algorithm cells. It exceeds ReDOR and OPER on 19/20 cells and every other subset baseline on 20/20; all six subset advantages remain significant under predeclared hierarchical inference with Holm correction. Holding total selector updates fixed, five acquisition rounds improve four representative cells by 11.23 points over one round and saturate thereafter. Equal-pass and equal-hour evaluations clarify that reuse, rather than a single-run speedup, creates the compute advantage. Mechanism and corruption interventions expose both useful sparse-reward enrichment and sensitivity to outliers. Finally, a whole-trace extension retains 95.4% of pooled ALFWorld success and 96.5% of pooled GSM8K exact match. CODS is therefore a reusable selection procedure, not a formal coreset guarantee.

Latent medical image generators usually treat the tokenizer as fixed preprocessing. We test whether this separation holds in a controlled ChestMNIST study at $64\times64$ that crosses discrete tokenizers, generator families, and sampler settings under a shared latent grid, with continuous-latent reference cells. The rankings depend jointly on the tokenizer, generator, and sampler. The best quantizer changes with the generator, and validation-based sampler selection changes the apparent generator ranking. We interpret this through a rate-distortion-modelability framing in which modelability is conditional on the generator, sampler, and inference budget. The interaction persists when the vocabulary-1024 block is retrained at three seeds, with 4 of 9 pairwise quantizer comparisons exceeding three seed standard deviations, including a reversal between LFQ and FSQ from MaskGIT to D3PM; the rest of the grid was trained at a single seed and is correspondingly less certain. Reconstruction PSNR alone is not a reliable selection criterion. On LFQ-1024, retuning the D3PM and SEDD samplers on a held-out validation split reduces FID-192 from 0.44/0.41 at the default budget to 0.09/0.10 at lower NFE, replicated across seeds, although the continuous references were not given an equivalent sampler sweep. FID-192, our internal ranking metric, ranks consistently with standard FID-2048 (Spearman 0.89) and with a label-free classifier two-sample test (0.86). All experiments are unconditional, use low-resolution $64\times64$ medical-style images and are evaluated with non-clinical FID-based metrics, and our claims are limited to that setting. Implementations are released at https://github.com/liamchalcroft/medtokenizers and https://github.com/liamchalcroft/medlatents.

Clinical foundation models trained on large-scale patient data are increasingly used for decision support, screening, and public health planning. As deployment expands, privacy risk arises from model-mediated leakage, yet its prevalence and severity remain poorly quantified. Models can disclose sensitive training artifacts, enabling patient re-identification in ways not captured by data-handling controls alone. As a result, existing frameworks, including HIPAA and GDPR, offer limited protection against assessing and addressing. We propose a practical framework for assessing privacy risk in clinical foundation models, illustrate realistic leakage scenarios across deployment settings, map them to legal regimes, and outline complementary technical and legal mitigations. Our analysis provides a context-aware risk assessment grounded in realistic usage to preserve the value of medical foundation models while rigorously safeguarding patient privacy.

Accurate and robust time series forecasting is essential in many applications involving physical processes, such as manufacturing monitoring and astrophysical event detection. In these settings, predictive models must remain reliable under noise, variability, and measurement uncertainty while capturing temporally localized structures corresponding to physically meaningful events. Convolutional neural networks (CNNs) are widely used for such tasks due to their computational efficiency and strong representational capacity. However, their learned temporal representations often exhibit unstable or physically inconsistent attention patterns, reducing robustness, generalization, and interpretability. This paper introduces PhysAttNet, a physics-informed attention framework for time series forecasting. PhysAttNet augments a lightweight CNN forecaster with an attention head guided by domain-informed regularization reflecting the structural properties of physical signals. Specifically, three complementary constraints are imposed during training: an alignment regularization that encourages attention to follow smooth, peak-centered temporal structures derived from the input signal, a smoothness regularization that enforces continuous temporal evolution, and a sparsity regularization that promotes selective focus on informative intervals. These differentiable regularization terms introduce physics-guided inductive bias without requiring annotated explanations or manual supervision. Experiments on two distinct applications, namely predicting cutting forces during milling and forecasting flares in blazar time series, demonstrate that PhysAttNet improves forecasting accuracy, generalization, and prediction performance on structurally important events.

Sampling high-dimensional probability distributions is a central task in scientific computing, with applications ranging from Bayesian inference to statistical physics and molecular simulation. Despite decades of methodological developments, two major challenges remain: scaling to high dimensions and efficiently exploring multimodal distributions characterized by metastable states. Classical approaches such as Markov chain Monte Carlo, tempering methods, or enhanced sampling based on collective variables have achieved major successes, but they also face intrinsic limitations. This tutorial review explores a new paradigm that has recently emerged at the interface of machine learning and computational statistical physics: the use of generative models as tools for sampling. In this context, models such as normalizing flows and diffusion models are not used in their traditional data-driven setting, but rather as flexible probabilistic models that can assist the sampling of distributions known only up to a normalization constant. This manuscript reviews the early development of this rapidly evolving field and discusses several methodological directions, including exact samplers based on generative models and strategies to train such models in the absence of data. While an exhaustive survey of the literature is not attempted, we present a selection of key ideas and methods, along with a discussion of their strengths and limitations. The review is intended to be an accessible tutorial for both physics and machine learning audiences, and it aims to provide a starting point for researchers interested in exploring this exciting area of research.

Self-improving coding agents that iteratively rewrite their own source code have demonstrated impressive performance on coding tasks. However, existing solutions generally derive self-modification from a single failure trajectory at a time, overlooking rich comparative signals available in the agent's expanding archive of past attempts. According to Mendelian principles of controlled inheritance, we introduce Mendel Gödel Machine (MGM). In addition to the general single-trajectory clonal mutation, MGM includes two new types of self-modification that better utilizes evidences accumulated: the reaction-norm mutation edits an agent based on its trajectories on multiple tasks simultaneously, and the cross-lineage hybridization edits an agent using the trajectory of a reference agent from another lineage on the same task. Under an additive fitness landscape model, we prove theoretically and demonstrate via controlled surrogate simulation that the new strategies facilitate a faster and better convergence over single-trajectory baselines. Experiments on SWE-bench and Polyglot confirm MGM's consistent improvement in performance, efficiency, and generalizability.

Traffic data collection is dominated today by deep object detectors followed by tracking-by-detection, a pipeline that presupposes what is often missing in practice: a detector already trained on the class one wants to count. We revisit a purely geometric traffic-sensing pipeline for Single Board Computers in which detection is class-agnostic: moving objects come from background subtraction and thresholding, and counting is decided by a geometric rule on an imaginary line across the road, a software inductive loop detector. With no object model, training set or per-object trajectory, it runs faster than real time on Raspberry Pi class hardware. Two counting rules are described: a constant average speed rule, whose expected accuracy is derived analytically as about 86% under a Gaussian speed distribution, and a self-calibrating pre-calibration rule that recovers the lane geometry from blob statistics and counts edges of lane occupancy, additionally yielding per-vehicle average speed at no extra cost. Over four videos the latter counts with 83.3%-100% accuracy; in a field deployment it reaches 91% against 37.5% for a blob-tracking baseline under the same compute budget. We report the observations of that period in detail: the resolution floor below which accuracy collapses, the frame rate floor at which vehicles alias past the counting line, the gap between short curated clips and long uncontrolled footage, and the trade-off between Python (easier to tune, 100% CPU) and C++ (40% CPU, thermally viable). These are properties of the sampling geometry, not of the hardware of the time, and still constrain edge deployments. We close by arguing where motion-based, class-agnostic detection remains the right tool: open-set classes with no annotated data, tight power budgets, privacy-constrained installations, and the cold start of mining training crops to bootstrap a learned detector.

Aligning large language models (LLMs) with human values remains a major challenge, especially for trustworthy AI. While existing approaches such as RLHF, CAI, and their variants have achieved promising results, they often rely on a single-agent framework and a unified reward system. This limits their ability to capture ethical pluralism, adapt to diverse moral contexts, and reflect the dynamics of multi-agent moral reasoning. In this work, we propose a framework that utilizes multilayer combinatorial fusion for contextual value alignment (MCF-CVA). At the first layer of the framework, it instantiates multiple moral agents, each fine-tuned to represent a distinctive value. Their outputs are then expanded combinatorially using both score- and rank-combinations as well as average and weighted aggregations. These combined models are then reduced to the same number of initial moral agents. This expansion and reduction (EAR) process continues for multi-layers until a stopping criterion is reached. The MCF-CVA framework leverages cognitive diversity between agents to mitigate conflicts and redundancies across multiple agents, producing responses that better reflect contextual human values. The framework using the EAR algorithm is performed on the dual architecture of Euclidean score space and Kemeny rank space. Empirical evaluations demonstrated that the proposed framework outperforms single-agent baselines, multi-agent single-layer results, and previous aggregation approaches on standard metrics, showing that the MCF-CVA framework provides a robust and effective mechanism for advancing contextual value alignment in LLMs.

Agent Skills provide reusable capabilities to LLM agents. Agent Skill inconsistencies can expose undisclosed dangerous behavior or cause wrong Skill selection. Recent Agent Skill research has increasingly examined Agent Skill consistency detection. Existing methods evaluate behaviors or security-property graphs against predefined categories or declared scopes. More recently, PL-HCL uses an LLM-based model to learn consistency across metadata, instructions, and resources. However, declaration and implementation behavior can be mixed across text and code, and a concise declaration can correspond to multiple connected implementation steps. We present SkillConsist to address both challenges. An LLM separates declaration and implementation content into behavior records on the implementation and declaration sides, while static analysis supplements implementation records. These records form declaration and implementation behavior graphs, respectively. Starting from a behavior record on either side, bidirectional graph alignment searches the other graph for a candidate subgraph and expands it along behavior relations until it completely expresses the source-side behavior. Graph differencing identifies conflicts between aligned subgraphs and outputs the detection results. We construct a 633-Skill benchmark from ClawHub's 500 most-downloaded public Skills and 133 Skill-Inject packages. The benchmark contains 319 inconsistent and 314 consistent Skills and 442 localized inconsistency annotations. On this benchmark, SkillConsist achieves 86.85% precision, 89.03% recall, and 87.93% F1 for package-level detection, improving F1 over the best baseline by 20.43 percentage points. For localization, it achieves 67.60% precision, 58.14% recall, and 62.52% F1.

We adapt two classical statistical estimators for quantifying uncertainty to modern deep learning, in order to provide clearer insights into uncertainty attributable to two sources : aleatoric uncertainty, or locally scarce data. Our approach leverages recent advances in approximate Fisher Information Matrices, to enable scaling to actual architectures. Experimental results demonstrate how each test points is differentially impacted by both sources, highlighting the practical utility of our estimators in improving the robustness of real-world applications.

Multilingual neural machine translation models such as NLLB-200 cover 200 languages but leave thousands unsupported, including most Grassfields Bantu languages of Cameroon. When fine-tuning these models for an unseen language, practitioners must choose a proxy language token, yet no principled method exists for this selection. We implemented an embedding initialization strategy where a language token is the average of embeddings from multiple typologically related languages already in the mod el. We evaluate this approach on Limbum-to-English translation using a parallel corpus of 8,837 sentence pairs from New Testament text and a bilingual dictionary. We compare models: NLLB-200 zero-shot (chrF2++ = 12.5), a Transformer trained from scratch (chrF2++ = 14.5), NLLB-200 fine-tuned with a Swahili proxy token (chrF2++ = 47.3), and NLLB-200 with our averaged embedding initialization (chrF2++ = 46.7). We find that the multi-language initialization achieves performance comparable to the best single-language proxy. Both NLLB-200 variants improve over the from-scratch baseline by over 32 chrF2++ points. These results show that multilingual transfer is the dominant factor in extremely low-resource Bantu translation while eliminating the need for heuristic proxy selection. However, all systems fail to preserve tonal diacritics, highlighting an open challenge. We make our dataset and code available to support further research.

Deep parameterized quantum circuits may remain sensitive to a parameter change while the observables retained by a learning model barely respond. We study this separation for a fixed computational-basis measurement. For a pure-state tangent, we compare the quantum Fisher information $F_Q$, the Fisher information $F_{\rm full}$ in the complete bitstring distribution, and the largest variance-normalized response $\mathcal I_{\mathcal A}$ available to a diagonal readout space $\mathcal A$. If the joint state–tangent frame is Haar random, we prove that the two successive information fractions are independent Beta variables whose means are $1/2$ and $r/(2^n-1)$, where $r$ is the centered dimension of the readout. Consequently, even the joint span of all computational-basis Pauli strings through any fixed weight $k$ retain only $O(n^k2^{-n})$ of the full-record information. Exact-statevector experiments across six circuit families show increasing finite-size agreement with this hierarchy in five nonconserving ensembles as the circuit depth grows. A number-conserving family departs strongly from the isotropic prediction even after correcting the support and readout rank, showing that rank alone is insufficient without tangent isotropy.

Hospitals are racing to embed AI, while coping with the surge in adaptation of the technology in other industries, into the triage management, documentation, scheduling, and revenue-cycle workflows, yet most deployments remain as fragmented pilots that stall at the edge of production, exposing patients and institutions to operational fragility, ungoverned risk, and mounting technical debt. At the same time, the global AI-in-healthcare market is projected to exceed nearly USD 1 trillion by 2034, according to the report of Fortune Business Insights, amplifying the financial consequences of architectural missteps and failed scaling strategies. This research proposes a compliance-first Agentic AI pattern catalogue and orchestration framework, purposely built for HIMS, moving beyond the single LLM chatbots and towards a governed ecosystem of autonomous and semi-autonomous agents. The framework extends by adding (i) a taxonomy of Agentic roles, (ii) a formal risk-stratification model that maps each pattern to risk tiers, human-in-the-loop checkpoints, and governance hooks, and (iii) a unified orchestration runtime capable of coordinating multi-agent workflows across EHR/HIMS landscapes such as Epic, Cerner, and MEDITECH. Technically the framework combines vLLM-based inference, optimized paging memory, confidential computing, and MCP based on-premise deployment, enforcing end-to-end encryption and policy-as-code controls aligned with HIPAA, GDPR, the EU AI Act, India's DPDP and DISHA Acts, ISO 27001, ISO 27002, ISO 14971 and IEC 62304. We exhibit how the proposed architecture is capable and efficient to reduce the documentation time, integration effort, and AI pilot attrition while constricting the governance and auditability, offering hospital leaders and governing authorities an urgently needed blueprint to convert AI investment into sustainable clinical, operational, and financial ROI

Long-term memory enables AI agents to maintain continuity across sessions, personalize behavior, and evolve through accumulated experience. Yet memory evolution is not simply a process of storing more information: new experiences may reinforce, revise, or interfere with existing memory states. Existing systems mainly emphasize memory construction and relevance-based retrieval, but several memories may remain simultaneously relevant while differing in state, temporal validity, or authority. We introduce Controlled Memory Interference (CMI), a controlled diagnostic and data-generation framework for studying how agent memory evolves under different memory relationships. Across controlled memory evolution, benign accumulation has limited effects, whereas relationship-specific interference sharply suppresses update plasticity with little stability gain, either by blocking target-memory exposure or by disrupting its downstream use. Lexical and Dense retrieval exhibit distinct interference pathways, while poisoning is more sensitive to update-authority cues than to recency alone. Beyond diagnosis, CMI provides targeted examples for interference-aware memory learning, improving the distinction between valid updates and interference-inducing memories while preserving performance on original memory tasks. These findings show that memory evolution is shaped not only by memory scale, but also by interactions among accumulated experiences. More broadly, memory interference emerges as an important factor for reliable continual agent memory systems.

Stochastic gradient descent for a loss function discontinuous across lower dimensional manifolds is analyzed by studying its differential equation limit.

Recent advances in video diffusion models (VDMs) have enabled high-fidelity video synthesis. However, generating mirror reflections remains challenging because the content within a mirror must remain consistent with the surrounding scene. Existing VDMs are not specifically designed to model scene-to-mirror relationships, which can lead to reflections with incorrect content or inconsistent spatial arrangements. We observe that mirror reflection generation involves two complementary challenges: determining what scene content should be reflected and how the reflected content should be spatially arranged within the mirror region. Motivated by this observation, we propose MirrorWorld, a reflection-aware video inpainting framework that models scene-to-mirror relationships during generation. Specifically, we introduce Semantic Relation Distillation (SRD), which transfers relational information from a frozen visual foundation model to encourage semantic associations between visible scene content and mirror regions. We further propose Geometric Transformation Alignment (GTA), which learns a transformation that guides the spatial arrangement of reflected content. The two components play complementary roles, with SRD modeling what should be reflected and GTA modeling how it should be arranged. To facilitate research on this problem, we construct a benchmark for video mirror reflection generation by repurposing four existing video mirror datasets into a unified reflection reconstruction task. Experimental results show that MirrorWorld achieves improved reflection reconstruction quality over representative image-based reflection generation methods and strong video inpainting baselines.

Recent optimization studies on Retrieval-Augmented Generation (RAG) have exploited chunk-level KV cache reuse to avoid processing long retrieved contexts for higher efficiency, while significant information redundancy and noise still remain in the coarse-grained chunks. This paper optimizes the Pareto frontier under low prefill latency constraints while maximizing accuracy by proposing CoinRAG (Contextualized Information Nugget KV Cache Reuse for Long-Context RAG). The name metaphorically reflects our core mechanism: much like assembling small tokens (or "coins") to accumulate a larger value, CoinRAG compositionally reuses offline-computed, fine-grained nugget caches to form a learned contextual representation efficiently in a more semantically relevant but compact manner. Specifically, instead of full-chunk encoding, CoinRAG identifies query-relevant semantic units within retrieved chunks through two-stage retrieval and seamlessly assembles their sliced KV representations with a chunk-level context. CoinRAG can be integrated with CacheBlend's selective recomputation for further accuracy gains under the same latency budget. Extensive evaluations on LongBench multi-hop question answering tasks demonstrate that CoinRAG substantially shortens the active context and outperforms the other baselines with a new Pareto frontier and an average 5.3% relative improvement in answer quality (F1) under a standard fast prefill latency budget.

Accurate user equipment (UE) localization is critical for beam management in reconfigurable intelligent surface (RIS)-assisted millimeter-wave (mmWave) based sixth-generation (6G) networks, especially if the direct base-station-UE links are unavailable. This paper proposes a beam-domain fingerprint framework that maps the received signal-to-noise ratio (SNR) across a small set of predefined RIS reflection states to the UE azimuth angle and range, without requiring channel state information (CSI). Crucially, we extend the framework to a realistic interference-impaired scenario in which a nearby cross-link interferer (CLI) corrupts the clean SNR fingerprint, yielding a signal-to-interference-plus-noise ratio (SINR) fingerprint; an interference-to-noise ratio (INR)-constrained calibration strategy keeps the interference level physically interpretable. Four machine-learning (ML) regressors are evaluated under both conditions. Simulation results at 28 GHz with a 20x20 RIS show that k-nearest neighbors (KNN) achieves the lowest angle MAE of 0.37 degrees and range MAE of 4 cm under clean conditions, rising to 1.4 degrees and 7.6 cm under interference. A key finding is that interference degrades angle estimation substantially more than range estimation across all models, a consequence of the asymmetric encoding of location information in the beam-domain fingerprint.

Muon-trained modular-arithmetic transformers can lose accuracy while retaining linearly decodable task information. Adjacent swaps localize five captured unnormalized failures to AdamW readout updates. Multiplying the actual readout displacement by the large feature mean produces a class-dependent logit offset shared across inputs that nearly reproduces each failure. Training-only decoders recover 98.20-100% held-out accuracy. Correcting cross-entropy derivative errors stabilizes five matched branches through step 100,000; four prospective accurate-CE RMS runs fail through embedding updates.