Peer Revenue Returns subject to peer review

Papers

Fresh from arXiv, typeset properly. Highlighted words trade on the market.

Computer Science Robotics

cs.RO Watch Robotics (sign in to use)

Saturday 18 July

Robotics

ADMM-Based Safety-Critical Distributed NMPC for Cooperative Transportation by Quadrupedal Robots

This paper presents a safety-critical distributed nonlinear model predictive control (DNMPC) framework for cooperative payload transportation by teams of quadrupedal robots. The proposed approach models the robotic team and the shared payload as a dynamically coupled networked system with rigid holonomic coupling constraints arising from cooperative transportation. To enable distributed real-time optimization, the centralized finite-horizon optimal control problem is decomposed into parallel local NMPC subproblems coordinated through the alternating direction method of multipliers (ADMM). The resulting distributed framework enforces consensus over both payload-state and interaction-wrench trajectories while explicitly incorporating acceleration-level holonomic coupling constraints within the distributed predictive control formulation. Safety-critical obstacle avoidance constraints for both the robotic agents and payload are enforced using higher-order control barrier functions (HOCBFs). The framework is validated through numerical simulations with teams of two, three, and four quadrupedal robots transporting shared payloads in cluttered environments. Real-time experiments on two- and three-robot teams demonstrate safe and robust transportation under payload uncertainty and external disturbances. Compared with centralized NMPC, the proposed framework achieves up to 23% reduction in average NLP solve time while maintaining comparable closed-loop performance. Ablation studies further demonstrate robustness to communication delays and show that explicit payload-state consensus and holonomic constraints substantially improve payload tracking and distributed coordination over existing wrench-only consensus formulations.
Read the full abstract

All authors Ruturaj S. Sambhus, Kapi Ketan Mehta, Yicheng Zeng, Kaveh Akbari Hamed

Robotics

User-Driven Learning from Demonstration: A Trajectory and Impedance Learning Method

This paper presents a method for user-driven robot Learning from Demonstration (LfD) that reduces user effort while ensuring compliant and precise reproduction. The method eliminates repeated teaching for the same task and enables real-time learning from a single demonstration. Demonstrated motions are reproduced with high precision, while impedance variations are learned in real time to provide both compliance and robustness against perturbations. This mitigates potential safety issues in Human-Robot Interaction (HRI) that arise from conventional time-indexed trajectories lacking compliance. The proposed approach integrates a three-dimensional (3D) Fast Diffeomorphic Matching (FDM) algorithm with a Dynamical System (DS)-based motion generator to achieve real-time single-shot demonstration learning and reproduction. An Extended Kalman Filter (EKF) framework compensates for reproduction errors and recovers from external interactions. Furthermore, an impedance parameterization function is incorporated to learn impedance variations from demonstrations and maintain surface contact for specific applications. The proposed approach is validated through comprehensive experiments on a 7 Degree-of-Freedom (DOF) KUKA LWR IV+ robot.
Read the full abstract

Robotics · Cross-listed from math.OC

Relative Entropy-Bounded Ambiguous Chance Constraints for Robust Planning in Nonlinear Systems

We consider defining risk probability in stochastic control problems under distribution ambiguity. Current approaches for chance-constrained control typically assume that the true state distribution is known and Gaussian distributed. These assumptions are not amenable to many real-world engineering applications where system dynamics are nonlinear and only approximately modeled. In this work, we define a distribution ambiguity set and, with a variational expression for exponential integrals, bound the expected risk value under an unknown distribution that resides within a relative entropy distance of a nominal Gaussian reference distribution. Our bound recovers the reference risk value in the zero-divergence limit. A method is presented to determine the relative entropy distance defining the ambiguity set that is a function of the reference covariance evolution and second-order dynamical truncation errors. The resulting contributions provide a framework for handling distributional ambiguity in nonlinear covariance steering problems. A stochastic spacecraft guidance example is presented to demonstrate our contributions.
Read the full abstract

Robotics

G2-Nav: Grounded and Guarded Vision-Language Costmaps for Robot Social Navigation

Social navigation requires the robot to reason and respond in complex real-world environments. While recent works attempt to incorporate human-level intelligence into robot planning using large Vision-Language Models (VLMs), end-to-end frameworks often create an unpredictable black-box, and existing instruction-following methods are not designed for full autonomy. To bridge this gap, we present G2-Nav, a novel framework that grounds abstract social reasoning and guards safe real-world deployment. Instead of asking the VLM for direct planning decisions, G2-Nav translates its semantic reasoning into a vision-language costmap with reliability and interpretability. The VLM evaluates traversable regions and social agents from open-set perception, mapping social context into the costmap. To improve real-world robustness, the VLM performs semantic verification on upstream tracking, and we introduce a high-frequency safety check to guard against system latency prior to trajectory generation. We demonstrate through real-world experiments that G2-Nav delivers safe, efficient, and socially compliant autonomous navigation in unstructured environments. Code is available at https://github.com/centiLinda/G2-Nav.
Read the full abstract

All authors Yuwen Liao, Yihang Lan, Yizhuo Yang, Ruimeng Liu, Xinhang Xu, Shenghai Yuan, Lihua Xie

Robotics

SinD 2.0: A Multi-City UAV Dataset with Semantic Risk Annotations for SOTIF-Oriented Safety Validation at Signalized Intersections

Safety validation at signalized intersections remains a critical bottleneck for the deployment of autonomous driving systems (ADS), as these scenarios involve dense heterogeneous traffic, contested right of way, and long-tail safety-critical interactions, posing significant challenges to the Safety of the Intended Functionality (SOTIF). Existing naturalistic driving datasets often suffer from geographical homogeneity, sparsity of safety-critical events, and lack of semantic risk annotations, which limit the evaluation of algorithmic generalizability and targeted SOTIF verification. To address these gaps, this paper introduces SinD 2.0, a large-scale drone-based intersection dataset dedicated to cross-domain ADS safety analysis. The main contributions of SinD 2.0 are: (1) Cross-domain diversity: It covers six signalized intersections across four Chinese cities, capturing distinct intersection topologies and regional driving behavior characteristics; (2) High-density risk interactions: A total of 32,682 safety-critical events are extracted via surrogate safety measures, significantly enriching the density of boundary test scenarios; (3) Hierarchical semantic annotations: Besides integration with high-definition (HD) maps and Signal Phase and Timing (SPaT) data, it provides multi-dimensional semantic labels including traffic violations, high-risk interactions, visual shielding, and narrow feasible areas; (4) Full-stack testing toolchain: It supports automated scenario extraction, prediction-only evaluation, open-loop replay, reactive closed-loop testing, and photorealistic rendering. Benchmark experiments demonstrate that SinD 2.0 exhibits significant domain shifts across cities, and the semantic risk subsets can effectively expose the performance limitations of ADS algorithms. The dataset, annotations, and testing toolchain are available at https://github.com/SOTIF-AVLab/SinD/tree/main.
Read the full abstract

All authors Yunwei Li, Shengjie Fu, Chunrong Chen, Chengxiang Zhao, Yuchen Fan, Mingyu Zhu, Yanchao Xu, Jiahui Xu, Anran Wang, Huanan Wang, Yuxin Zhang, Lan Yang, Chuzhao Li, Jie Ji, Yi He, Abhijit Sarkar, Akash Sonth, Hong Wang, Jun Li

Robotics · Cross-listed from cs.CV

What Do They See? Interpreting Complex Road Scenarios Through the Eyes of Vision-Language-Action Models for Safe and Trustworthy Autonomous Vehicle Learning

End-to-end autonomous driving models are now able to navigate complex road scenarios, mapping raw sensor observations directly to observed paths for open-loop evaluation and often effective driving in closed-loop evaluation. Yet the internal logic of these safety-critical systems remains largely opaque, due to the complexity of traffic scenes. We propose a counterfactual ablation framework called Counterfactual Vision Action Analysis (CVAA) that systematically removes individual detected objects from front-camera images using photorealistic generative inpainting to prepare counterfactual sets to evaluate the difference in the model's response. This isolates the causal effect of each object's presence on the model's planning behaviour. Applied to the Alpamayo 1 trajectory predictor across 210 nuScenes driving scenes, we create a dataset Counter -nuScenes, using which we see that vehicles and pedestrians within the model's 'path' dominate causal influence as expected, while traffic lights, as expected, exert disproportionate effect relative to their image footprint. However, we also find cases where the model responds strongly to objects a human driver would consider irrelevant. This brings forth a deeper question: does the model itself view the scene as a sum of individual objects influencing the outcome, or does it encode an entirely different set of internal features that do not correspond to human-legible scene elements? To further understand this, we compare intermediate representations of original and inpainted image pairs using mechanistic interpretability techniques and examine the effect of the removal through the various model layers. Together, these two stages offer a path from behavioral auditing to representational understanding, creating explainable driving systems and solidifying human-AI trust.
Read the full abstract

All authors Kalpana Panda, Wesley Maia, Vinti Agarwal, Ross Greer

Robotics

PREFAIL: Identifying Precursors to Failures in Robotic Lift-and-Place Tasks to Improve Task Execution Performance

Non-prehensile manipulation enables flexible material handling with part carriers, but friction-based support makes high-speed motions failure-prone, while slower operation increases cycle time. Proactive failure prediction is therefore essential for efficient and reliable performance, yet existing approaches remain limited by key constraints, including sensitivity to dynamic actions and high dependence on known policy structures. Furthermore, existing methods and datasets lack a precise characterization of the latest intervention time, leaving it unclear whether a detected failure can still be prevented through timely intervention. In this paper, we investigate lift-and-place tasks for non-prehensile material handling manipulation and propose a more effective approach to predicting precursors to failures (PREFAIL) by analyzing the relative motion of target objects with respect to the carrier. We further introduce a dataset that precisely identifies the latest intervention time for risky manipulations, enabling rigorous evaluation of whether a failure prediction is actionable. We validate our approach on both simulation and real-world datasets. Our experimental results demonstrate that PREFAIL substantially improves both the accuracy and timeliness of responses to failure precursors.
Read the full abstract

All authors Zeyu Shangguan, Rajas Chitale, Rutvik Patel, Satyandra K. Gupta, Daniel Seita

Robotics

A BIM-enabled, Agent-based Discrete-event Simulation Platform for Robotic Studies: A Method based on Graph Theory

Indoor robots are increasingly employed for facility management tasks such as cleaning and inspection. These applications primarily rely on navigation and can be effectively supported by predefined routes or perception-driven Simultaneous Localization and Mapping (SLAM) techniques. However, more complex tasks, such as locating and repairing leaking pipes, require not only navigation but also access to building information, including the location, geometry, material, and operational attributes of components. Existing navigation approaches provide only limited environmental understanding and cannot readily supply such information. In contrast, Building Information Modeling (BIM) contains rich geometric, semantic, and operational information that remains largely underutilized in robotic applications. This study proposes a BIM-enabled, agent-based simulation platform for knowledge-driven indoor robot navigation and operation planning. Within the framework, indoor environments are discretized into grid cells that are mapped to graph nodes and classified as target, obstacle, or regular nodes according to their spatial relationships with building elements. Traversal costs are assigned to edges connecting neighboring nodes, enabling graph-theoretic algorithms to compute efficient and collision-free navigation paths while avoiding obstacles. Simulation results demonstrate that the proposed graph representation enables efficient and collision-free navigation. A key limitation associated with coarse discretization, namely overlap between target-occupied and obstacle-occupied cells, is identified and mitigated through grid refinement, improving spatial accuracy and path feasibility. The proposed platform supports virtual evaluation of robotic operations prior to deployment and provides a foundation for BIM-informed robotic systems in facility management.
Read the full abstract

Robotics

Approximate Relative Entropy Constraints for Nonlinear Covariance Steering Under Distribution Ambiguity

Covariance steering provides an efficient framework for designing linear stochastic feedback policies, but its extension to nonlinear systems relies on a Gaussian surrogate obtained through local linearization. Because this surrogate may differ substantially from the true nonlinear state distribution, risk-sensitive quantities such as collision probability and mean-squared error may be inaccurately estimated. This work develops a distributionally robust covariance-steering framework based on the relative entropy, also known as the Kullback-Leibler divergence (KLD), to account for ambiguity in the propagated probability density function. Using a variational representation of exponential integrals, we derive computable upper bounds on risk-sensitive quantities over a KLD ambiguity set. We then formulate an upper bound on the time rate of change of the KLD between the true nonlinear distribution and a Gaussian reference surrogate. Under some assumptions, this bound is controlled by decision variables within a covariance-steering formulation. The resulting constraints are incorporated into a sequential convex programming algorithm to design stochastic guidance policies that keep the true distribution close to its Gaussian surrogate while enforcing bounds on risk-sensitive performance measures. The proposed approach is demonstrated on a challenging nonlinear spacecraft transfer between two near-rectilinear halo orbits.
Read the full abstract

Robotics

GLidE-SLAM: GL-Accelerated Indirect-Direct Embedded SLAM

With the growing demand for robotics, autonomous drones, and wearable extended reality systems, the deployment of Visual SLAM on embedded devices remains challenging. Tracking must sustain high frame rates while preserving compute resources for map extension and maintenance. This paper presents GLidE-SLAM, a monocular hybrid indirect-direct framework that addresses this by architectural separation: the system performs GPU-accelerated direct tracking on intermediate frames, while reserving the full indirect pipeline for map extension and global consistency. We leverage highly parallel image-alignment operations for pose-only estimation without depth optimization or map point creation, making the workload suitable for GPU offloading and freeing CPU resources for backend tasks. We implement the direct tracker using vendor-agnostic OpenGL ES~3.1 compute shaders, enabling deployment across a broader range of commodity embedded platforms without requiring CUDA support. To our knowledge, this is the first complete direct photometric pose estimator realized via compute shaders for embedded-class devices. Experiments on target platforms demonstrate up to 9$\times$ higher frame rates than the CPU-only baseline while maintaining trajectory accuracy and improving practical deployment across commodity resource-constrained hardware.
Read the full abstract

Robotics · Cross-listed from cs.CV

InLiER: Learning-Free Heterogeneous LiDAR Place Recognition via Intermediate Mixed-Radix Structural Keypoint Tokenization

LiDAR place recognition supports loop closure, relocalization, and multi-agent map management. As robotic platforms increasingly combine LiDARs with different fields of view, resolutions, and scanning patterns, existing descriptors degrade because they are tightly coupled to sensor-specific characteristics. We present InLiER, a learning-free pipeline based on an intermediate tokenization step. Height-sliced keypoints from structural elements receive mixed-radix token IDs encoding height, radial distance, local shape, and azimuth from local 3D geometry, in a compact sub-2KB representation. The same vocabulary is reorganized across three retrieval stages: height-ceiling histogram intersection for fast rotation-invariant shortlisting, binary bitmask alignment for yaw estimation and reranking, and token-guided geometric verification for 6-DoF pose estimation. InLiER achieves state-of-the-art performance on the HeLiPR dataset and in real-world field experiments, among modern handcrafted methods and outperforms the learning-based baseline on most cross-sensor configurations.
Read the full abstract

Robotics

Token-Wise Latent Streaming from Slow Reasoners to Fast Planners for Dynamic Vision Language Navigation

Vision-Language Navigation in dynamic, human-centric environments exposes a fundamental tension: linguistic reasoning is slow and deliberative, whereas safe, socially compliant planning should be instant and reactive. The resulting observation staleness is safety-critical: a maneuver chosen during inference can already be unsafe by the time it executes. We observe that, long before a VLM finishes its inference, its intermediate hidden states already encode action-relevant intent. We propose SPARK-VLN, a dual-system framework for dynamic social VLN that streams the slow VLM reasoner's knowledge to a fast flow-matching expert planner throughout token generation, providing fresh and evolving guidance during inference. This design is realized by three modules: a Token-Wise Hidden Streamer that extracts intermediate hidden states along the token generation process, a Sequence-to-Slot Latent Bridge that projects them into fixed-size latent slots, and an Evolving Latent Conditioner that infuses them into the expert planner. We also introduce a human-centric benchmark suite for dynamic social vision-language navigation that keeps pedestrians and the robot active throughout inference and reports navigation success, social compliance, human collisions, and explicit staleness statistics. Across these settings, SPARK-VLN mproves navigation success and social compliance while sustaining inference efficiency. Webpage: https://hutslib.github.io/SPARK-VLN/.
Read the full abstract

All authors Tianshuai Hu, Yangyi Zhong, Zeying Gong, Lingdong Kong, Xiaodong Mei, Guoyang Zhao, Xiaolu Liu, Song Wang, Rong Li, Junwei Liang

Robotics · Cross-listed from cs.CV

Hybrid Machine Learning for Articulation Angle Estimation of Truck-Semitrailer Combinations

Accurate articulation angle estimation of trucks with trailers is critical for autonomous driving and advanced driver assistance system (ADAS). Existing methods either require manual initialization, additional sensors, or prior knowledge and signals from trailers, or they lack real-world validation, limiting practical deployment. This paper presents multiple learning-based models to directly estimate articulation angles from visual and kinematic inputs, eliminating the need for dedicated driving maneuvers for initialization, bounding box annotations, trailer-mounted sensor signals, or prior knowledge of trailer parameters. Two learning-based models are integrated with a kinematic model within an extended Kalman filter (EKF) framework, and an adaptive weighting scheme based on uncertainty quantification is applied for measurements involving visual input. Extensive real-world experiments with different trailer types demonstrate the approaches' robustness and generalization under out-of-domain conditions, including new trailers, varying colors, and lighting conditions. Results show that the hybrid method achieves accurate and reliable articulation angle estimation while maintaining reduced implementation requirements and practical deployment advantages.
Read the full abstract

All authors Qixuan Zhang, Jonas Boettcher, Simon F. G. Ehlers, Marvin Stuede

Robotics

PhyAgentOS: A Self-Evolving Operating System for Embodied Agents with Decoupled Cognitive Planning and Physical Execution

Vision-language-action models, world models, and agentic planners each advance physical intelligence, yet their composition lacks a common execution abstraction, shared state, semantic verification, and persistent experience across heterogeneous embodiments. We present PhyAgentOS, a runtime foundation delivering scheduling, verification, memory, benchmarking, and safety as system-level services. Its Session-Centered Runtime treats a session, not an action, as the minimum unit of scheduling, compatibility preflight, supervised execution, evidence collection, and acceptance. To decouple cognition from physical execution, the cognition-physics boundary is a file system: the State-as-a-File protocol materializes cross-layer state as Markdown with YAML, yielding inspectable, versionable records without code dependencies between Agent and Runtime layers. These views form a unified cognitive state space aligning intent, capabilities, environment, execution, and experience. The SessionVerifier distinguishes execution termination from semantic task completion via evidence-grounded verdicts of success, failure, or replan. Verified outcomes are consolidated through epistemic memory into reusable knowledge and corrective lessons, closing a trial-and-error loop without retraining. Benchmarking reuses the deployment session and verification path, so results trace to real execution. Layered safety constrains both policy-driven and agent-driven execution: preflight, action bridges, SafetyGuard, heartbeat monitoring, and target-local constraints. Validation is progressive: games test cognitive planning, simulation adds dynamics and control, real robots add hardware noise, with the cognitive layer held constant. PhyAgentOS is benchmarked on Optimus-67, StarDojo, and DST-Dojo, validated on 19+ simulated and physical embodiments, and gains on LIBERO, Calvin, and RoboCasa365 across multiple VLA models.
Read the full abstract

All authors Yang Liu, Weixing Chen, Xinshuai Song, Tao Pu, Siwen Mo, Yongjie Bai, Zihao Chen, Qianran Sun, Liruo Zhong, Ying Shen, Liang Lin

Robotics

AI-Augmented Model Predictive Control for Safe and Adaptive Rendezvous and Proximity Operations

Autonomous rendezvous and proximity operations (RPO) in adversarial orbital environments require guidance architectures balancing target pursuit, safety preservation, and real-time adaptability under dynamically evolving interaction conditions. Although learning-based approaches show promise, their application to safety-critical orbital robotics remains limited by concerns regarding interpretability, robustness, and constraint awareness. This work presents an adaptive Model Predictive Control (MPC) framework for autonomous spacecraft RPO in multi-agent adversarial scenarios. The proposed architecture combines a constrained receding-horizon MPC formulation with a data-driven supervisory tuning layer that adjusts controller parameters from offline closed-loop evaluation and online interaction geometry. Relative motion follows Clohessy-Wiltshire (CW) dynamics, enabling computationally efficient finite-horizon prediction and real-time quadratic optimization. The MPC formulation incorporates actuator limits, predictive keep-out-zone constraints, slack-variable feasibility handling, and optional Control Barrier Function (CBF) safety filtering. Rather than generating thrust commands directly, the adaptive layer modifies interpretable MPC parameters, including tracking weights, safety penalties, minimum-separation objectives, and keep-out-zone objectives. The framework was evaluated in the official Kerbal Space Program Differential Game (KSPDG) Capture-the-Satellite environment through Monte Carlo simulations. Results demonstrate improved closed-loop robustness, adaptive maneuvering behavior, and rendezvous performance compared with fixed-parameter MPC while preserving safety-aware operation and real-time feasibility, providing a modular, interpretable foundation for adaptive spacecraft RPO.
Read the full abstract

All authors Luca Sportelli, Tyler Barr, Cagri Kilic, Di Wu

Robotics

SAGE: A Socially-Aware Generative Engine for Heterogeneous Multi-Agent Navigation

Safe and socially compliant navigation in open human-robot environments requires robots to reason about heterogeneous participants with different dynamics, autonomy levels, and social roles. Existing trajectory prediction and planning methods often rely on homogeneous interaction assumptions or enforce only geometric collision constraints, making it difficult to jointly model asymmetric interactions, coupled prediction-planning, and soft social norms. This paper proposes SAGE, a socially-aware generative engine for heterogeneous multi-agent navigation. SAGE represents robots and surrounding entities as a directed heterogeneous graph and employs a Heterogeneous Graph Transformer (HGT) to encode type-specific asymmetric interactions. Conditioned on the resulting context, a diffusion-based generative module jointly models future entity trajectories and robot trajectory plans. During inference, a training-free safety-social energy guidance mechanism refines sampled robot trajectories using differentiable collision, kinematic, task-progress, and role-conditioned social-compliance terms. Extensive experiments on real-world (ETH/UCY and SDD) and synthetic datasets verify the effectiveness of SAGE in improving safety and social compliance while maintaining task performance. The proposed guidance mechanism consistently reduces collision and social-violation rates, scales to teams of up to 20 robots, and enables explicit control of the safety-accuracy-task trade-off without retraining. These findings demonstrate the potential of SAGE as a scalable framework for socially-aware multi-agent navigation in complex environments.
Read the full abstract

All authors Lan Hu, Minghui Liwang, Wenbo Zhu, Xinlei Yi, Yiguang Hong, Xianbin Wang, Zhenzhen Jiao, Seyyedali Hosseinalipour

Robotics

An Indoor Navigation System for the Visually Impaired based on UWB Positioning and D* Lite Path Planning Algorithm

This paper proposes an indoor navigation system for the visually impaired, leveraging Ultra-Wideband (UWB) positioning technology and the D*Lite path planning algorithm. The system utilizes UWB sensors to provide precision localization in GPS-denied environments. The D* Lite algorithm is integrated to optimize travel trajectories and ensure rapid route re-planning in the presence of dynamic obstacles. Experimental results demonstrate that the system operates reliably with low latency, providing safety and flexibility for users in complex indoor spaces.
Read the full abstract

All authors Thanh C. Vo, Dong LT. Tran, Huy HM. Le, Duyen N Ha, Tuan Anh Pham, Hai Thanh Dang, Hoang T. Tran

Robotics

Autonomous VR-Based Risk Detection for Situational Awareness in Dangerous Settings

In high-risk environments such as disaster response, situational awareness depends not only on detecting hazards but also on communicating them clearly to human operators. Vision Language Models (VLMs) have shown strong potential for scene understanding in safety-critical settings, yet their value as part of human-facing robotic systems remains underexplored. We present a VR-based Human Robot Interaction framework for studying how VLM-assisted robots can support situational awareness in simulated hazardous environments. In our system, a robot explores a virtual scene and queries a VLM to identify potential hazards and annotate user-facing points of interest. These annotations are presented to a human operator through an immersive VR interface. This framework enables controlled evaluation of both robotic hazard identification and the communication of safety-critical information to users. Results from our study indicate that the annotated VR interface was preferred over the unannotated baseline and that participants reported high clarity, usefulness, and comfort when interacting with the system. These findings suggest that combining VLM-based robotic perception with immersive visualization is a promising approach for supporting situational awareness in hazardous settings.
Read the full abstract

All authors Mohammad Eskandari, Murali Krishna Varma Indukuri, Stephanie M. Lukin, Cynthia Matuszek

Friday 17 July

Robotics

Differentiable Reinforcement Learning for Path Tracking by an Agile Fish-Like Robot

Fish-like swimming has inspired the design of several dozens if not hundreds of bioinspired robots in the last few decades. But the control and motion planning of such robots has been challenging due to the poorly modeled fluid-structure interaction and the nonlinear underactuated dynamics of such robots. While reinforcement learning has allowed significant advances in the context of ground and aerial robots, the lack of a suitable simulation environment with appropriate computational speed and accuracy have prevented similar progress for fish-like robots. We address this two-fold problem by developing a simulation platform that approximates the motion of our fish-like robot with computational efficiency. Then the motion control and path tracking by the robot is performed using PID control where the (variable) gains are learned using back propagation through time and training on a curriculum. The policy learned in the simulation is then applied on the physical platform, demonstrating an excellent match.
Read the full abstract

All authors Prashanth Chivkula, Kartik Loya, Venkata Ravindhra Reddy Varikuti, Phanindra Tallapragada

Robotics

Foresight Residual RL for Long-Horizon Robot Manipulation with Vision-Language-Action Models

Vision-Language-Action (VLA) policies offer strong general-purpose manipulation priors, but often fail on tight-tolerance, contact-rich assembly due to long-horizon credit assignment and subtask coupling: a state that is geometrically successful for the current skill can be brittle for downstream skills. We show this failure mode in residual reinforcement learning (RL) over a frozen VLA base policy: constant sparse success rewards improve each subtask in isolation yet yield little or no gain when skills are chained, because terminal state quality is uncontrolled. We propose Foresight Residual RL, which optimizes handoff quality by augmenting each subtask's sparse success reward with an offline-estimated foresight value – the probability of future subtask success conditioned on the terminal state of the current subtask. Concretely, we (i) train a visual foresight predictor from images of terminal states of the base policy, labeled using downstream rollout statistics, and (ii) train residual policies via backward foresight induction, using the predictor output as a reward multiplier. On a three-phase wrench-based nut-tightening assembly task in Isaac Gym (grasp, move-insert, rotate), our method achieves 85.6% full-task success, outperforming standard subtask residual RL (54.5%) and VLA baselines, while leaving per-subtask success unchanged. These results highlight that improving long-horizon performance requires shaping which successful states are produced at each sub-task, not only whether success occurs.
Read the full abstract

All authors Yuhan Liu, Xinyu Zhang, Litao Liu, Abdeslam Boularias

Robotics

Certifiable Safe Model-Based Reinforcement Learning with Control-Affine Dynamics Approximation

Safe model-based reinforcement learning (RL) often bridges control-theoretic analysis and RL for robots to safely explore (partially) unknown system dynamics while deriving control actions for task efficiency. The control performance and safety assurance typically rely on prior knowledge of partially modeled nominal system dynamics and the data-driven models that compensate for residual model uncertainties. However, existing methods often overlook the structure of residual model uncertainties (e.g., components affine in control), which could lead to overly conservative robot behaviors or invalid safety guarantees under the safe learning-based controllers. This paper proposes a safe reinforcement learning framework that learns control-affine dynamics with a certifiable data-driven safe policy using control barrier functions (CBF). Specifically, we first use Control-Affine Random Fourier Features (ARFF) to model robot dynamics in a control-affine form, which offers computational efficiency that scales with dataset size and reduces potential model bias for model-based reinforcement learning. Then, a model-free, efficient uncertainty quantification method using adaptive conformal prediction (ACP) is applied to quantify the uncertainty in the safety constraint arising from the learned control-affine dynamics. This allows for data-driven safety assurance amenable to principled and efficient controller synthesis with CBF. Simulation results on the cartpole and the 3D quadrotor platforms demonstrate the effectiveness of the proposed framework.
Read the full abstract

All authors Hao Zhou, Yanze Zhang, Cameron Reid, Wenhao Luo

Robotics

Linear Stability Analysis of an INDI Pitch-Rate Controller under Model Mismatch for a Tilt-Rotor VTOL UAV

Incremental Nonlinear Dynamic Inversion (INDI) is attractive for unmanned aerial vehicle (UAV) flight control because it reduces dependence on a full aerodynamic model while retaining strong disturbance-rejection capability. For a tilt-rotor vertical takeoff and landing (VTOL) architecture, however, the admissible model-mismatch range of the fast inner loop is still not characterized analytically in a parameter-explicit way. This paper isolates the pitch-rate/elevon subchannel of an existing cascaded INDI controller and studies its linear stability under model mismatch. A closed-form fifth-order transfer function is derived for the full controller-estimator-actuator-plant interconnection, and stability is characterized through the Routh-Hurwitz criterion over a parameterized linear model. Two representative three-parameter sweeps produce interpretable stability regions. Based on these feasibility maps, two uncertainty-aware tuning procedures are proposed: a robustness-oriented design that maximizes a weighted worst-case combination of gain margin and phase margin, and a performance-oriented design that maximizes worst-case closed-loop bandwidth subject to margin constraints. The results show that actuator lag and inertia mismatch are comparatively benign at nominal gain, whereas control-effectiveness mismatch, particularly a sign error in the allocation, is the most dangerous destabilizing factor, leading to concrete tuning recommendations for conservative and aggressive operating conditions.
Read the full abstract

Robotics

Back to the museum: Investigation of the acceptance of Android Andrea with and without emotion simulation in a museum

For a second time, the android robot Andrea was set up at a public museum in Germany for six consecutive days to have conversations with visitors, fully autonomously. Building on previously gathered qualitative results, the robot was now capable of engaging in multi-lingual conversation with the visitors about the museum context. The robot was prepared with context information about the museum in general and its surrounding exhibits this time. The robot featured a slightly artificial sounding voice that was previously evaluated as congruent with its gender-ambiguous but very humanlike design. Three experimental conditions were implemented, in which either (1) the robot simulated no emotions, (2) the robots emotions were determined by ChatGPT 4.1, or (3) the WASABI emotion simulation architecture simulated the robot's emotion dynamics. An extended version of the TAM2 questionnaire was employed to let 73 visitors report on several factors of their opinion about the android robot Andrea after having experienced it. In result, the statistical analysis suggests that these first two approaches to implementing emotions into the chat architecture of our android robot Andrea did not yield any positive effects on the subjective evaluations by the visitors and were not detectable on a conscious level.
Read the full abstract

Robotics

PRISM: Multimodal Terrain Mapping for Rover Navigation in Unstructured Environments

Robotic navigation in unstructured environments requires robust situational awareness to safely traverse hazards such as steep slopes and rocky terrain. To address this challenge, perception systems increasingly rely on multimodal sensor fusion. Specifically, integrating thermal imagery with standard optical and depth sensors enhances terrain differentiation, directly improving the reliability of mapping algorithms. This paper presents PRISM, a multimodal perception system for terrain mapping in unstructured settings. PRISM leverages a custom sensor suite to capture aligned RGB, depth, and thermal (RGB-D-T) imagery. At its core is OmniUnet, a novel vision transformer-based network specifically designed for multimodal semantic terrain segmentation. We validated the proposed system using two newly annotated datasets (BASEPROD and LAENTIEC) and demonstrate its real-world applicability through physical field experiments. Deployed on a resource-constrained embedded computer, PRISM efficiently generates traversability maps that directly enable autonomous navigation via a rover's Guidance, Navigation, and Control (GNC) subsystem.
Read the full abstract

All authors Raul Castilla-Arquillo, Carlos Perez-del-Pulgar, Levin Gerdes, Alfonso Garcia-Cerezo, Miguel A. Olivares-Mendez

Robotics

Handroid: Bridging Dexterous Hand and Humanoid

Dexterous hands and humanoid robots are typically developed as distinct embodiments: the former enable contact-rich manipulation at the object scale, whereas the latter provide mobility and whole-body interaction in human-centered environments. We introduce Handroid, a desktop-scale dual-embodiment robot that integrates both capabilities within a single reconfigurable platform. Handroid reuses one 27-DoF electromechanical body as either a dexterous hand or a desktop humanoid, measuring 0.33 m in height and 2.05 kg in weight. In the dexterous hand embodiment, 20 DoFs form an anthropomorphic hand closely matching the kinematic structure of the human hand. In the humanoid embodiment, the same articulated modules are reconfigured into a humanoid with a head, arms, and legs, including a 12-DoF lower-limb structure for locomotion and whole-body motion. Handroid further provides a unified control and learning framework supporting hand teleoperation, dexterous grasping, in-hand manipulation, humanoid locomotion, gait generation, and interactive motion authoring. We validate the platform through real-world dexterous manipulation, reinforcement-learning-based locomotion, keyframe motion deployment, and a long-horizon task involving embodiment reconfiguration, locomotion, docking, and dexterous pick-and-place. These results position Handroid as a compact and reproducible platform for advancing morphology-reconfigurable robotics and cross-embodiment robot learning.
Read the full abstract

All authors Ruogu Li, Chenyang Ma, Sikai Li, Zhenyu Wei, Yunchao Yao, Haochen Shi, C. Karen Liu, Shuran Song, Mingyu Ding

Robotics

Vision-Language-Motion Maps: An Open-Vocabulary, Uncertainty-Aware, Queryable Motion Attribute for 3D Scene Maps

Open-vocabulary 3D maps let robots answer language queries about what and where, but they assume a static world and cannot answer queries about how scene elements behave. We introduce Vision-Language-Motion Maps (VLMM), an open-vocabulary, language-queryable 3D map - queried through a rule-based intent router over open-vocabulary object nouns, not a general natural-language interface - in which each element carries a fused motion attribute: a VLM/LLM semantic movability prior combined with geometrically observed cross-frame motion, together with a per-element uncertainty. Queries reduce to attribute filters that distinguish what has been seen to move, what could move but has not, and what stays still. On a controlled simulator benchmark with exact ground truth (AI2-THOR, three scene types) we show through ablation that the schema fields are non-substitutable: a semantic-only baseline fails motion queries even with strong features, and neither motion field substitutes for the other (the prior cannot answer "what is moving," observed motion cannot answer "what could move"). On real dynamic RGB-D (TUM and Bonn, six sequences) we show the uncertainty channel - our key difference from prior fused-motion work - consistently improves moving-vs-static average precision and reduces false motion flags, and that it is robust to estimated (noisy) poses. The raw confidence is not calibrated, but post-hoc isotonic calibration reaches an expected calibration error of 0.10. VLMM is a representation contribution: the closest prior maps each lack at least one of the four properties - open-vocabulary, language-queryable, fused prior-and-observed motion, and per-element uncertainty - that our combination provides.
Read the full abstract

Robotics

VTLoc: Learning-based Tactile Contact Localization in Visual Point Clouds

Vision and touch are complementary modalities essential for robotic perception and manipulation. While vision provides global object context, touch offers precise local information at contact points. Integrating these modalities for contact localization, i.e., predicting the location of touch on an object's surface, poses significant challenges due to the need for accurate spatial alignment between tactile data and visual geometry. To address this challenge, we propose VTLoc, a novel visual-tactile framework that localizes contact points from tactile readings using a 3D point cloud as visual input. VTLoc introduces two key components: a geometric multi-modal alignment module, which reconstructs a pseudo-point cloud from fused visual-tactile features and aligns it with the visual point cloud to enforce spatial consistencies across modalities; and an iterative localizing updater, which iteratively refines the predicted contact location using fused visual-tactile features. Evaluated on a new benchmark of 100 real-world objects, VTLoc improves single-touch contact localization by reducing local-to-global correspondence ambiguity.
Read the full abstract

Robotics

A New Implementation of NeoSLAM and a Comparative Evaluation with RatSLAM

This paper presents a new implementation of the NeoSLAM algorithm. The proposed version is a complete rewrite of NeoSLAM into a modular architecture using modern frameworks that, together, enable real-time execution with minimal discarding of input data. This work also provides a comparative evaluation between NeoSLAM and RatSLAM across three datasets under varying environmental conditions. The experimental results highlight differences in mapping consistency and trajectory reconstruction, demonstrating the effectiveness and practical applicability of the proposed ROS2-based implementation. The results indicate that the new NeoSLAM outperforms the original in terms of processing throughput for real-time applications and achieves comparable performance to RatSLAM in terms of map reconstruction across the evaluated datasets.
Read the full abstract

All authors Joao Victor T. Borges, Fabio Coelho, Paulo Padrao, Jose Fuentes, Ramon R. Costa, Liu Hsu, Leonardo Bobadilla

Robotics

BayesContact: Uncertain Pose Estimation via Visuo-Tactile Proposals and Simulation-based Inference

Contact-rich manipulation requires pose estimates that are often more accurate than what depth-only sensing provides. Existing methods, relying on vision and contact, employ costly offline training procedures that need to be retrained for new environments and geometries. We propose BayesContact, a Simulation-Based Inference framework for visuo-tactile pose estimation in peg-in-hole insertion. BayesContact maintains a particle belief over object pose and fuses depth observations with force/torque-derived contact evidence. We employ simulation based forward models to approximate these observation likelihoods. For each pose hypothesis, a renderer predicts depth measurements and a physics simulator predicts contact outcomes under guarded probing actions; both are scored against real observations to update the belief. The resulting multimodal belief also enables information-gain-based probing for active disambiguation. Across simulated geometries and real-robot experiments, BayesContact improves pose observability and insertion success over vision-only inference by 30%
Read the full abstract

All authors Aditya Kamireddypalli, Matias Mattamala, Joao Moura, Russell Buchanan, Sethu Vijayakumar, Subramanian Ramamoorthy

Robotics

Let the Body Follow: Coupled Egocentric Control for Whole-Body Robot Teleoperation

Whole-body teleoperation requires users to coordinate perception, manipulation, posture, and mobility across multiple robot components. This coordination is difficult because users must simultaneously control the robot's head, arms, torso, and base while maintaining task awareness and avoiding kinematic or environmental constraints. In this paper, we propose coupled egocentric control, a body-following teleoperation approach in which the robot's torso and base automatically respond to the operator's head and arm motions. Rather than requiring explicit touchpad commands for every torso or base adjustment, the system lets users focus on gaze and hand control: head pitch adjusts torso height, head yaw drives base rotation, end-effector height adjusts torso motion, and end-effector workspace boundaries trigger base translation. We evaluate this approach in a user study on whole-body teleoperation of a TIAGo mobile manipulator for home-care-inspired tasks. Compared with a baseline hybrid interface, coupled egocentric control improves object manipulation efficiency, reduces button-based control effort and arm singularities, lowers mental demand and overall workload, and increases ease of use, ease of learning, confidence, and user preference for torso and base control.
Read the full abstract