Robotics
Papers
Fresh from arXiv, typeset properly. Highlighted words trade on the market.
Wednesday 1 July
Safe motion planning in dynamic environments requires reasoning about the uncertainty in predicted obstacle motion without sacrificing real-time performance. Existing conformal approaches conformalize a scalar score that aggregates per-obstacle prediction errors, losing spatial coherence and scaling poorly with scene density. We instead conformalize the entire predicted distance field at once. This functional conformal prediction (FCP) framework yields a distribution-free, field-level lower bound, from which safety follows uniformly: any trajectory satisfying the resulting constraint is certified safe, independent of how the control space is sampled. The key enabler is that the residual distance field is empirically low-rank and approximately time-invariant, which makes the bound decomposable in coefficient space. An envelope is fitted offline via functional PCA and a Gaussian-mixture inductive conformal procedure, then refined online by a lightweight adaptive functional conformal (AFCP) update on a low-dimensional vector. This keeps the per-step cost largely insensitive to obstacle count and retains long-run field coverage under distribution shift. We embed the envelope as a tightened safety constraint in a sampling-based model predictive controller, FCP-MPC. On the ETH–UCY pedestrian benchmarks and a dense 3D quadrotor task with up to 280 dynamic obstacles, FCP-MPC attains a favorable balance of safety, feasibility, and efficiency, reaching goals where pointwise and egocentric conformal baselines become too conservative or too expensive, while keeping per-step computation far below online uncertainty-reasoning baselines.
Robotics · Cross-listed from cs.CV
Creating Impactful Autonomous Driving Datasets: A Strategic Guide from Research Gap to Benchmark
Well-designed autonomous driving datasets have fundamentally shaped research progress, yet existing literature primarily describes what datasets contain rather than how to strategically design impactful ones. This is especially limiting for small and medium-sized labs and startups that cannot afford to misallocate scarce resources. We argue that impactful dataset creation begins with a diagnosis: whether a research question is blocked by a data problem or an evaluation problem, and proceeds by selecting the minimal data operator(s) that closes the resulting gap, recording new data only when no cheaper operator(s) suffices. We analyze the evolution of major autonomous driving (AD) datasets through this lens and distill a strategic framework spanning gap identification, operator choice, sensor suite design, and annotation strategy. We ground the framework in a running case study of our KITScenes dataset family. The datasets are available at: https://kitscenes.com/
Read the full abstract
Robotics · Cross-listed from cs.CV
ABot-M0.5: Unified Mobility-and-Manipulation World Action Model
Mobile manipulation is a key capability for general-purpose robots, yet remains challenging for current embodied learning methods. VLA policies are typically reactive and lack explicit world modeling, while existing World Action Models (WAMs) are still poorly aligned with the structure of mobile manipulation: they operate on coarse video chunks, model entangled navigation-manipulation actions, and train inverse dynamics under supervision that does not match autoregressive inference. As a result, they often miss fine-grained contact dynamics, suffer from action-distribution conflicts, and accumulate errors over long-horizon rollouts. We propose ABot-M0.5, a new WAM built on the insight that mobile manipulation requires alignment at three levels: temporal granularity, action space, and train-test consistency. To align temporal granularity, we introduce intermediate latent actions that capture local visual state transitions and serve as an bridging action space between video latents and embodiment-specific controls. To align action space, we design a dual-level Mixture-of-Transformers architecture that disentangles both modality representations and heterogeneous action subspaces such as base movement and arm manipulation. To align inference conditions, we propose the dream-forcing training strategy that progressively trains inverse dynamics on model-predicted videos, improving train-test alignment and robustness during autoregressive prediction. Experiments on challenging mobile and fine-grained manipulation benchmarks demonstrate that ABot-M0.5 achieves state-of-the-art performance in both long-horizon task success and finegrained control accuracy. These results highlight the critical importance of granularity-aligned, action-disentangled, and inference-consistent world-action modeling.
Read the full abstract
Robotics
Path Planning in Physically Viable World Models
Robots deployed in unstructured outdoor environments often plan from scene reconstructions collected before deployment because operators cannot remap large or remote sites before every mission. As a result, robots must make long-horizon planning decisions using stale maps that assume the terrain remains unchanged, even though physical changes to the environment may render previously feasible routes unsafe or unreachable at execution time. We present a physically viable world model for evaluating what-if queries for robot navigation under future terrain change. The system augments reconstructed 3D Gaussian splat scenes with physics-based simulation to generate physically modified versions of the same environment without recollecting sensor data or rebuilding the map. We then implement a terrain-aware planner that accounts for physical events, obstacles, and deformations that are simulated by the world model. This allows robots and human operators to evaluate whether planned routes remain feasible before committing to a planned route, particularly in constrained environments where retreat or recovery may become impossible once conditions change. We evaluate the system on a real outdoor field site in Central Texas using simulated flooding across multiple severity levels. We measure route and mission feasibility as terrain conditions deteriorate under physically simulated interventions. Our results show that physically viable world models expose long-horizon route failures and rerouting behavior that are not apparent when planning only on the original reconstructed environment, allowing robots to evaluate how future terrain changes may affect route feasibility before deployment.
Read the full abstract
Robotics
Domain Arithmetic: One-Shot VLA Adaptation under Environmental Shifts
Vision-Language-Action (VLA) models often fail to perform the same learned tasks under environmental shifts, such as changes in camera pose and shifts to a different but similar robot (e.g., from Panda to UR5e). Adapting these models to the shifted environment (i.e., target domain) often requires training on multiple demonstrations for each task, which are costly to collect. To reduce the burden of data curation and training, we propose an analogy-based method that adapts VLA models under environmental shifts through weight vector arithmetic with domain-specific information addition, named Domain ARiThmetic (DART). Unlike prior approaches, DART requires collecting only a single demonstration, enabling efficient adaptation. To accurately isolate domain-specific information for addition, DART performs subspace alignment between singular components in weight vectors to filter out noisy components. In both simulated and real-world experiments, DART outperforms existing VLA adaptation methods in one-shot scenarios across diverse visual and embodiment shifts. Code is available at https://github.com/snumprlab/dart.
Read the full abstract
Robotics
From Real-Time Planning to Reliable Execution:Scalable Coordination for Heterogeneous Multi-Robot Fleets in Industrial Environments
With the increasing deployment of heterogeneous robot fleets in industrial environments, efficient coordination remains a critical challenge. Real-time path planning must simultaneously accommodate high robot densities and heterogeneous motion capabilities, while communication delays, execution uncertainties, and other disturbances may cause robots to deviate from the temporal assumptions underlying planned paths. Such deviations can lead to excessive waiting and congestion propagation across the fleet. This paper presents SCALE, a reactive online coordination framework that enables real-time planning while maintaining robust execution. Within this framework, we introduce a motion-induced conflict reduction mechanism to support the online generation of feasible paths for online conflict resolution. To mitigate the effects of disturbances, we further design a generalized Conjugate Action-Precedence Hypergraph (CAPH) that adaptively adjusts precedence relations among robots. Extensive validation experiments, together with a three-day deployment in a warehouse, demonstrate the
Read the full abstract
Robotics
Enhancing Robustness in Robot-Environment Interactions through Passive Compliant Degrees of Freedom: A Hybrid Position-Force Control Approach with Feedback Linearization
Robot-environment interactions in dynamic or unstructured settings are often degraded by impact shocks, vibrations, and uncertainties in contact geometry and mechanical properties. This paper proposes an interaction architecture that combines feedback-linearized hybrid position-force control with a passive compliant degree of freedom embedded at the end-effector. Unlike conventional hybrid position-force control, which relies mainly on active feedback, force sensing, and gain tuning, the proposed architecture uses a physical spring-damper interface to store and dissipate impact energy at the contact point before high-frequency shocks propagate to the actuated joints and force-control loop. The approach is evaluated in MATLAB/Simulink on a 2-DOF planar manipulator with three end-effector configurations: rigid, spring-only, and spring-damper. Results under fixed and time-varying interaction conditions show that the spring-damper configuration provides stronger attenuation of contact-induced oscillations, lower force and velocity error variance, and smoother joint-torque response. Representative reductions include 36.5% in fixed-environment tangential force-error standard deviation, 25.4% in variable-environment normal force-error standard deviation, and 41.1% in variable-environment normal velocity-error standard deviation.
Read the full abstract
Robotics
[Preprint] Dynamic Modeling, Gait Synthesis, and Control of a Novel Subsurface Bore Propagator
In this article, we present dynamic modeling, gait synthesis, and feedback control design for a modular novel subsurface robot, designed for human-free subsurface exploration and excavation. The subsurface propagator design is based on two major aspects: 1) anchor and propel movement like an earthworm and 2) excavation similar to tunnel boring machines. This design is decoupled into five separate modules: one drill head to excavate and create cavity for propagation, two modules to anchor the robot, and two modules to enable propagation of the body. In order to design a controller for each of the modules, dynamic models using the Euler-Lagrange framework are developed. These mathematical models are used as a baseline to design controlled decoupled operation of the different joint movements. The operation of robotic assembly is constructed via a centralized state machine for gait synthesis with integration of the designed feedback controller. The controllers are tested on the real robot geometry to aid sim-to-real integration: A physics-based Unity simulation using a CAD model of the robot and integration of the trained controller via ROS verifies the performance of the robot. The experimental results demonstrate that the proposed design, controllers and the gait synthesis strategy together are capable of anchoring the robot in place and creating an total advancement of 30\,mm into the soil after completing 3 gait cycles.
Read the full abstract
Robotics
Learning from Demonstration via Spatiotemporal Tubes for Unknown Euler-Lagrange Systems
We present STT-LfD, a unified Learning from Demonstration (LfD) framework that integrates motion learning with control for unknown Euler-Lagrange systems. Unlike traditional decoupled approaches that track a fixed reference, the proposed method treats demonstrations as a data-driven safety specification. Using heteroscedastic Gaussian Processes, STT-LfD learns Spatiotemporal Tubes (STTs) as an intent envelope that capture time-varying precision requirements of a task. A closed-form feedback controller then enforces these learned constraints while respecting actuator limits, without requiring explicit system identification. The approach preserves the temporal structure of demonstrations, remains computationally efficient, and avoids explicit system identification. Hardware experiments on a mobile robot and a 7-DOF manipulator show that it outperforms baselines in robustness to disturbances and computational speed.
Read the full abstract
Robotics
From Technical Metrics to User Perception: A User Study of a Multimodal Human-Robot Interaction System for Object Detection and Grasping
Improvements in the technical performance of human–robot interaction (HRI) systems do not automatically translate into differences that human users can detect during live interaction. This paper investigates whether a 15 percentage point gain in end-to-end task success (from 75% in a multimodal baseline system to 90% in an improved configuration identified through a prior ablation study) is sufficient to produce consistent and measurable differences in user perception. The baseline system combines Whisper for speech recognition, Florence-2 for open-vocabulary object detection, LLaMA 3.1 for action extraction, and an interval Type-2 fuzzy logic controller for motion execution. The improved configuration replaces the perception and language modules with Grounding DINO + SAM and Qwen 3.5 9B, respectively, while retaining the same controller. A within-subject user study with 24 participants compared both systems on the same tabletop object-grasping task. After interacting with each configuration, participants rated perceived speed, reliability, and overall competence and fluency on a 7-point Likert scale. Results show that 17 out of 24 participants (70.83%) preferred the improved system (exact binomial test, p = 0.043, h = 0.43), and all three perceptual constructs were rated significantly higher for the improved configuration after Holm correction, with large to very large effect sizes (p < 0.001). These findings confirm that the identified technical improvements are perceptible to users in direct interaction and underscore the importance of complementing benchmark evaluation with user-centred evidence when assessing robotic manipulation pipelines.
Read the full abstract
Robotics
VLM-AR3L: Vision-Language Models for Absolute and Relative Rewards in Reinforcement Learning
Designing effective reward functions remains a major challenge in reinforcement learning (RL), particularly in open-ended environments where task goals are abstract and difficult to quantify. In this work, we present VLM-AR3L, a framework that leverages Vision-Language Models (VLMs) to provide both absolute and relative rewards for RL. VLM-AR3L interprets an agent's visual observations in the context of a natural language task goal, and learns both absolute and relative rewards from VLM-generated preference labels. The absolute reward model predicts scalar evaluations for individual states, while the relative reward model compares consecutive observations to infer progress or regression toward the task goal. Their integration combines the stability of state-based evaluation with the robustness of comparative supervision. We evaluate VLM-AR3L across benchmarks spanning classic control, manipulation, and open-world embodied tasks, with a particular focus on Minecraft given its visual complexity and long-horizon decision-making requirements. Experimental results show that VLM-AR3L consistently outperforms prior VLM-based reward learning methods.
Read the full abstract
Robotics
Search-Based Spatiotemporal and Multi-Robot Motion Planning on Graphs of Space-Time Convex Sets
Spatiotemporal motion planning, especially in multi-robot settings, requires robots to reason about collision-free regions that change over time, which is challenging in continuous spaces when feasible regions are transient and geometrically constrained. We present an algorithmic framework based on graphs of space-time convex sets (ST-GCSs), where collision-free regions are represented as convex sets in space-time and trajectories correspond to paths on the graph together with continuous motions within the selected sets. We formulate time-optimal planning on ST-GCSs as a graph-search problem over path-indexed states and develop a best-first search solver that evaluates partial paths via continuous trajectory optimization, guided by admissible heuristics and dominance checks. We further present an Exact Convex Decomposition (ECD) scheme to reserve trajectory occupancies in space-time, enabling unified handling of dynamic obstacles and multi-robot interactions. For multi-robot motion planning, we integrate ST-GCS planning and ECD into prioritized planning methods and introduce a windowed coordination scheme to improve efficiency. Extensive experiments on single-robot and multi-robot problems demonstrate substantial speedups over various planners while maintaining high solution quality, particularly in environments with narrow and transient feasible regions. Large-scale demonstrations further show that the proposed multi-robot motion planner can solve instances with up to $100$ robots within only a few minutes. Project homepage: https://sites.google.com/view/stgcs
Read the full abstract
Robotics
Learning Gait-Aware Quadruped Locomotion with Temporal Logic Specifications
Reinforcement learning (RL) for quadruped locomotion commonly depends on fixed, hand-crafted, and Markovian reward functions that may limit interpretability of learned policies and may lack explicit control over gait behaviors. We introduce a framework where distinct gaits are specified using parameterized constraints expressed in Signal Temporal Logic (STL). These include safety bounds, gait synchronization constraints, command tracking, and actuation bounds. From these specifications, we develop a reward shaping mechanism that provides learning agents a dense, continuous reward landscape that encodes desired behavior. We define parametric STL templates for three speed regimes (walking-trot, trot, bound), calibrate their parameters from reference rollouts, and compute rewards from using smooth approximations of STL robustness over the rollouts. The generated rewards can be used to provide shaped gradients compatible with Proximal Policy Optimization (PPO). We instantiate the approach on Google's Barkour quadruped robot in MuJoCo XLA (MJX). We use parallelization within the simulator to improve training speeds and use domain randomization to robustify learned policies. Compared with hand-crafted rewards, an expert-switching oracle, and Text2Reward, Human-STL maintains high command-tracking success across the evaluated speed range while exhibiting substantially higher consistency with the intended speed-dependent gait structures. Videos can be found on our project website: https://stl-locomotion.github.io/.
Read the full abstract
Robotics
Robust Operational Space Control with Conformal Disturbance Bounds for Safe Redundant Manipulation
Redundant robotic manipulators operating in constrained and human-interactive environments require accurate task-space tracking together with rigorous safety guarantees under dynamic uncertainties. Classical operational space computed torque controller (OSCTC) relies on accurate dynamic models and degrades in the presence of disturbances. In contrast, the data-driven paradigm of residual learning approximates disturbances as functions learned from full-state measurements, which are often noisy in practice, lack rigorous theoretical guarantees, and introduce additional design complexity. This paper proposes a robust OSCTC framework that integrates an extended state observer (ESO) with conformal prediction to combine model-based robustness and data-driven adaptability. The ESO estimates lumped disturbances directly in operational space without requiring full-state measurements as in residual learning, and a robust control barrier function (CBF) is constructed to enforce safety under uncertainty. However, robust CBFs require a known disturbance-variation bound to guarantee absolute safety, which often leads to conservatism in practice. To address this limitation, we further employ a sliding-window conformal prediction mechanism to estimate the bound online in a distribution-free manner, thereby achieving practical probabilistic safety guarantees. Experiments on a 7-DoF Franka Research 3 manipulator demonstrate millimeter-level tracking accuracy and real-time safe control at 1~kHz under various disturbances.
Read the full abstract
Robotics
Unleashing More Actions via Action Compositional Training for VLA Models
Vision-Language-Action models excel at robotic manipulation, driven by the scale and diversity of demonstration data. However, standard training paradigms often cause VLA models to severely overfit to specific behavioral patterns, rendering them unable to generalize to out-of-distribution scenarios even when those scenarios merely require novel combinations of identical sub-skills. While expanding datasets can mitigate this overfitting, acquiring high-quality robot data remains notoriously labor-intensive and cost-prohibitive. To resolve this impasse without expensive human teleoperation and to truly unleash more actions,i.e., enable VLA models to compose known sub-skills into a much broader set of executable behaviors beyond the original demonstrations-we propose ACT-VLA (Action Compositional Training for VLA Models), an offline data augmentation framework that leverages the model's latent task representations to synthesize novel, physically valid demonstrations directly from existing tasks for policy training. By eliminating additional manual data collection, our method automatically expands the training distribution and mitigates overfitting. We evaluate our approach on challenging manipulation tasks in simulation. Experiments demonstrate that while baseline VLA models generalize poorly due to original distribution overfitting, policies trained with our synthesized data achieve substantially higher success rates, validating that leveraging existing tasks for automated demonstration synthesis provides an effective, scalable, and data-efficient route to broadening VLA generalization.
Read the full abstract
Robotics
NeHMO: Neural Hamilton-Jacobi Reachability Learning for Decentralized Safe Multi-Arm Motion Planning
Safe multi-arm motion planning is a challenging problem in robotics due to its high dimensionality, coupled configuration space, and complex collision constraints. Centralized planners are capable of coordinating all arms but often face scalability limitations, restricting applicability in real-time settings. On the other hand, decentralized methods are scalable and recent deep learning-based approaches have shown promising results. However, these depend on accurate behavior prediction or coordination protocols and may fail when other arms act unpredictably. To address these challenges, we introduce a neural Hamilton-Jacobi Reachability (HJR) learning-based approach to approximate a safety value function that captures worst-case inter-arm safety constraints. We further develop a decentralized trajectory optimization framework that uses the learned HJR representation for real-time planning. The proposed method is scalable and data-efficient, generalizes across multi-manipulator systems, and outperforms state-of-the-art baselines on challenging multi-arm motion planning tasks.
Read the full abstract
Robotics · Cross-listed from cs.CV
Wake up for Touch! Mask-isolated Tactile Alignment Learning in MLLMs
Touch supplies the physical grounding needed to perceive intrinsic material properties, such as friction and compliance, that vision alone often cannot resolve. Recent efforts for equipping multimodal LLMs with this tactile sense, however, expose a zero-sum trade-off: the limited parameter budget of compact models forces a choice between acquiring the new sensory modality and preserving the established vision-language reasoning. We present Splash, a mask-isolated tactile alignment learning framework for MLLMs. Splash quantifies the significance of each pretrained parameter, and partitions the parameter space into a dormant and critical subspace. While the frozen critical subspace acts as a stable anchor to safeguard general visual knowledge, Splash updates the isolated dormant subspace to internalize tactile alignment towards LLMs. This selective, non-destructive expansion effectively prevents catastrophic forgetting and ensures non-destructive modality expansion. Extensive experiments show that Splash effectively achieves tactile reasoning without additional inference overhead in the LLM part, demonstrating state-of-the-art performance on visuo-tactile benchmarks, including SSVTP, TVL, and TacQuad, while preserving its original general-purpose capabilities.
Read the full abstract
Robotics
What's Hidden Matters: Identifying Planning-Critical Occluded Agents using Vision-Language Models
Autonomous vehicles must safely navigate complex environments where planning-critical agents may be hidden from view. Current approaches often treat all occlusions with uniform conservatism, yielding needlessly defensive driving, or they infer hidden spaces without estimating the impact on the planner. This work bridges the critical gap between perception and planning by enabling Vision-Language Models (VLMs) to identify and reason about the specific hidden agents that are most critical to the ego-vehicle's trajectory. We introduce a novel framework that uses Planning KL-divergence (PKL), an information-theoretic metric, to systematically identify and rank occluded agents based on their impact on the ego vehicle's plan. Using this planning-aware ranking, we employ an expert VLM (GPT-5) to generate rich, structured annotations that capture the visual evidence and reasoning required for this task. We apply this framework to the nuScenes dataset to create a new benchmark focused on high-impact scenarios. We conduct comprehensive experiments on a wide range of general-purpose and domain-adapted VLMs, demonstrating that fine-tuning on our PKL-guided data yields dramatic performance improvements across all models. Notably, our results show that smaller, fine-tuned models significantly outperform their much larger zero-shot counterparts, and that our PKL-guided data selection strategy improves performance by approximately 30% over random sampling. Our work presents the first systematic approach for training VLMs to focus on planning-critical occlusions, enabling more semantically grounded and efficient risk assessment in autonomous driving.
Read the full abstract
Tuesday 30 June
Robotics
ASPIRE: Agentic /Skills Discovery for Robotics
Traditional robot programming is notoriously challenging: it requires orchestrating multimodal perception, managing physical contact dynamics, and handling diverse environment configurations and execution failures. We introduce ASPIRE (Agentic Skill Programming through Iterative Robot Exploration), a continual learning system that autonomously writes and refines robot control programs in a code-as-policy paradigm while compounding experience into a reusable skill library. ASPIRE operates in an open-ended learning loop, consisting of three components: (1) a closed-loop robot execution engine that exposes fine-grained multimodal traces, enabling the agent to autonomously diagnose failures, synthesize repairs, and validate outcomes; (2) a continually expanding skill library that distills validated fixes into reusable, transferable robotic knowledge; and (3) an evolutionary search procedure that generates diverse programs, systematically debugging them to explore beyond single-trajectory refinement. ASPIRE surpasses prior methods by up to 77% on manipulation tasks under perturbation, 72% on Robosuite's bimanual handover task, and up to 32% on long-horizon household tasks. The accumulated skill library further enables zero-shot generalization: on representative unseen long-horizon tasks, ASPIRE achieves 31% success, outperforming the 4% success rate of prior methods. Performance scales with the capabilities of frontier models. With Claude Opus 5.5, ASPIRE nearly saturates these benchmarks, achieving 99% average success across all 80 LIBERO-Pro tasks and 100% success on representative Robosuite and BEHAVIOR-1K tasks. Beyond simulation, skills discovered in simulation reduce real-world robot programming effort across embodiments and robot APIs, while skills acquired through online interaction with physical robots enable ASPIRE to solve a Rubik's Cube with progressively improving efficiency.
Read the full abstract
Robotics · Cross-listed from cs.CG
Guaranteed Escape for a Bouncing Robot in Pipe Chains
We study the symmetric bouncing of a point robot within orthogonally-joined rectangles with equal width, which we refer to as pipes. We provide an exhaustive case analysis of every trajectory pattern inside a single rectangular pipe segment, identifying the conditions under which the robot exits. We then extend the analysis to L-shaped pipes and, more generally, to linear chains of $k$ orthogonally connected pipe segments. We prove exit guarantees for the special angle $\alpha = \pi/4$. Furthermore, these results extend to pipes with curved joints.
Read the full abstract
Robotics
ELMP: Efficient Learning for Motion Planning via Analytical Policy Gradients
Neural Motion Planners (NMPs) enable fast reactive motion generation, but adapting them to new environments typically requires recollecting large expert datasets, which is computationally prohibitive. We propose ELMP, a framework for data-efficient adaptation via self-supervised fine-tuning. Rather than generating additional expert trajectories with expensive global planners, ELMP directly optimizes the policy through a differentiable kinematic layer using dense collision, target-reaching, and smoothness objectives. This replaces expert data generation with rapid problem sampling, reducing per-sample adaptation cost by roughly two orders of magnitude. To further support robust generalization across changing kinematic chains, we introduce a mechanism to explicitly encode tool geometry via point clouds. Benchmarked against classical and neural baselines, ELMP achieves an 84.8% average success rate with orders-of-magnitude lower cold-start latency than classical methods. In unseen environments, self-supervised fine-tuning improves success rate from 57.3% (zero-shot) to 89.8%, removing the data collection bottleneck. Our approach maintains millisecond-level inference latency and is validated on a physical Franka Emika Panda robot.
Read the full abstract
Robotics
HydraCollab: Adaptive Collaborative-Perception for Distributed Autonomous Systems
Collaborative-perception enables multi-robot systems to enhance situational awareness by sharing perceptual information. Existing collaborative-perception systems face an inherent trade-off between communication bandwidth requirements and perception accuracy, where methods that exchange more information achieve better perception results at the cost of increased communication overhead. However, real-world communication networks impose bandwidth constraints that require minimizing communication overhead without sacrificing perception performance. To address this challenge, we propose HydraCollab, an adaptive collaborative-perception framework that (i) selectively transmits the most informative sensor features and (ii) dynamically employs collaboration strategies (intermediate or late) based on spatial confidence maps. Extensive evaluations on the V2X-R, V2X-Radar and UAV3D-mini datasets demonstrate that HydraCollab achieves the best overall trade-off between accuracy and communication cost among existing collaborative-perception methods. Relative to SOTA Where2comm, HydraCollab uses only 41% of the bandwidth on V2X-R and 26% on V2X-Radar while improving performance by 0.78% and 0.75% respectively. Our code and models are available at https://github.com/AICPS/HydraCollab.
Read the full abstract
Robotics
Distributed Multi Robot Lunar Cargo Transportation via Phase Decomposed Reinforcement Learning
Modular reconfigurable robotic systems provide a scalable solution for cooperative surface operations in future lunar missions. However, cooperative cargo transportation remains challenging due to morphology-dependent topology changes, strong payload-induced coupling, long-horizon decision making, and safety constraints. This paper proposes a phase-decomposed reinforcement learning framework for cooperative cargo transport with distributed robotic units. The task is decomposed into lifting, transportation, and placement, each optimized with a dedicated joint-state policy capturing inter-agent coupling. Centralized training promotes stable convergence, while deployment uses onboard proprioception for control and OptiTrack motion capture for ground-truth evaluation and post-processed metrics. A deterministic phase controller expressed in Markov state representation regulates transitions between stages, and a failure-sensitive synchronization mechanism ensures coordinated progression and safety-aware halting during real-world execution. The framework is evaluated in simulation and through controlled field experiments at a JAXA space exploration test facility. Results demonstrate reliable cooperative transport across all stages in both simulation and hardware experiments.
Read the full abstract
Robotics
Dual-Informed Vertical Expansion for Multi-Objective Node Selection in Anytime Conflict-Based Search
Conflict-Based Search (CBS) is a leading exact algorithm for Multi-Agent Path Finding (MAPF), but its high-level node-selection rule is usually treated as a fixed implementation detail. Standard best-first selection is strong for minimizing expanded nodes and closing the optimality certificate, yet it can maintain a large frontier, interrupt parent-child expansion sequences, and provide no feasible incumbent until termination. This paper studies node selection as a first-class design choice for exact CBS. We introduce Dual-Informed Vertical Expansion (DIVE), a policy that is best-bound between dives and depth-oriented within a dive. DIVE starts each dive from the current best-bound frontier, follows promising children to exploit parent-child locality, and uses incumbent pruning to limit unproductive excursions. We formalize CBS node selection through a branch-and-bound view, prove that the traversal policy can be changed without affecting exactness, and analyze the resulting trade-offs among expanded nodes, dive breaks, queue size, and primal-dual bound progress. The analysis predicts three complementary extremes. Best-first search is node efficient, iterative deepening is memory efficient, and DIVE is dive efficient while retaining regular best-bound reanchoring. Experiments on standard MAPF benchmarks support this trade-off map. DIVE consistently reduces dive breaks, provides early incumbents with certified gaps, uses substantially less queue memory than best-first search, and benefits from warm starts and simple responsive variants in dense or memory-limited regimes.
Read the full abstract
Robotics
3D Point World Models: Point Completion Enables More Accurate Dynamics Learning
Learning predictive models of the world enables robotic control through planning, potentially allowing robots to improvise solutions on new tasks. However, large video-based dynamics models lack explicit 3D spatial structure and suffer from geometrically inconsistent long-term rollouts with compounding errors. Emerging 3D dynamics models based on partial point clouds improve geometric consistency but remain sensitive to occlusions and accumulated prediction drift. To address these challenges, we present 3D Point World Models (3DPWM) - a task-agnostic world model that operates entirely in 3D space by first completing partial point clouds and then learning action-conditioned dynamics in this completed 3D scene. By operating on completed geometry, 3DPWM enables reliable long-horizon rollouts and more accurate cost evaluation for model-based planning while supporting adaptation to new tasks. Experiments across different robotic embodiments and tabletop manipulation benchmarks demonstrate that 3DPWM achieves significantly more reliable long-horizon rollouts (100-300+ steps), supports both open-loop and closed-loop planning, and enables successful sim-to-real transfer.
Read the full abstract
Robotics
Iterated Invariant EKF for 3D Landmark-Aided Inertial Navigation
Inertial navigation systems aided by three-dimensional landmark measurements constitute a fundamental problem in robotic perception and state estimation. Classical SO(3)-based Extended Kalman Filter (SO(3)-EKF) approaches provide practical solutions, but suffer from the false observability problem, in which the filter becomes overconfident in unobservable directions, leading to degraded estimation performance. The Invariant EKF (IEKF) addresses this limitation by reformulating the system dynamics as a group-affine system on a Lie group, although its measurement update does not fully satisfy certain state compatibility properties. More recently, the Iterated Invariant EKF (IterIEKF) was proposed to further improve the IEKF by ensuring, in the low-noise regime, that the estimated state remains on the observed state manifold while the uncertainty is confined to its tangent space. In this work, we formulate and apply the IterIEKF to landmark-based inertial 3D localization for the first time. Through numerical simulations, we show that the proposed approach outperforms the classical SO(3)-EKF, the Iterated SO(3)-EKF, and the IEKF in terms of both estimation accuracy and consistency.
Read the full abstract
Robotics
Stop Pretending Social Robots Are Inevitable
This paper takes issue with the recent themes of both the RO-MAN and the HRI conferences for their portrayal of a future human-robot society as inevitable. The focus is on discussing how such statements ultimately shape research. By treating a future human-robot society as a fait accompli, license is given for user studies to imagine any scenario they like, no matter whether it has any ecological relevance, and to emphasise the scenario design over actually creating robot abilities needed to fullfill the imagined role. Meanwhile, research that focusses on actual societal needs, without assuming that robots are a solution, is deprioritised, as is technical development, in particular with respect to abilities that are necessary to enable robots that function as social agents rather than a mere automation of tasks. A frame that simply assumes a robot future not only detracts from scientific advancement in favour of a techno-solutionism we ought to resist, it is also self-defeating as it risks stifling the research needed to bring it about. We should therefore reject attempts to frame and promote the field in terms of the inevitable social robot and instead focus on one that facilitates advances in the field regardless of what the future holds. This paper suggests that a renewed focus on cognitive mechanisms necessary for the "I" in HRI would be a good starting point.
Read the full abstract
Robotics
AD-MPCC: Adaptive Differentiable Model Predictive Contouring Control for Autonomous Racing
This paper presents Adaptive Differentiable Model Predictive Contouring Control (AD-MPCC), a framework for autonomous racing that integrates differentiable MPCC with online parameter estimation to handle varying road-surface conditions. For online parameter estimation, we leverage a parameterized Pacejka Magic Formula together with a regularized moving-horizon estimation scheme with exponentially decaying weights to capture road interactions and update parameters in real time. Furthermore, we propose a differentiable MPCC (Diff-MPCC) framework that enables optimal adjustment of objective weights based on predefined long-horizon performance costs. To implement Diff-MPCC for online objective weight adaptation, we propose a Pacejka-informed machine learning model that is trained in a supervised manner using data generated by Diff-MPCC to tune the objective weights. Simulation results demonstrate that AD-MPCC reliably ensures safety and achieves faster lap times compared to baseline controllers in both single-surface and multiple-surface scenarios.
Read the full abstract
Robotics
Learning Expert Strategy for Autonomous Robotic Endovascular Intervention via Decoupled Procedural Execution
Endovascular interventions are high-stakes procedures requiring precise device operation within complex and tortuous vascular anatomies. Autonomous endovascular navigation has the potential to standardize procedural quality and reduce the performance variability inherent in manual operation. Although Reinforcement Learning (RL) approaches have demonstrated promise in enabling autonomy in endovascular intervention, they often struggle with explicit constraint satisfaction and safety guarantees. To address these challenges, a learning-based expert strategy is introduced, enhancing procedural consistency in autonomous endovascular intervention by explicitly decoupling high-level strategic decision-making from low-level procedural execution. The proposed framework replicates the expert clinical decision-making process: a strategic RL policy generates global navigation intents, which are subsequently refined through an expert-informed execution module. This module ensures that robot movements strictly adhere to expert operational norms, real-time kinematic limits, and vessel safety constraints. Experimental evaluation across high-fidelity 3D simulations and a real-world robotic platform demonstrates that the proposed framework not only outperforms baseline policies but also effectively replicates expert-level proficiency. The framework achieves a high navigation success rate (> 96%) and a 29.3% reduction in operational steps, which translates to enhanced operative efficiency and minimized device-vessel interaction. Furthermore, a 13% reduction in trajectory variance indicates superior procedural standardization, aligning autonomous behavior with established clinical norms. These results underscore its potential to enhance the predictability, safety, and consistency of robotic endovascular interventions.
Read the full abstract
Robotics
Optimal any-angle path planning in static and dynamic environments
Any-angle path planning extends traditional graph-based path planning by allowing movement between any pair of vertices, rather than being restricted by predefined edges. It can find straighter and shorter paths in continuous space with graphs, making it particularly suitable for navigation in open areas. Many any-angle path-planning algorithms have been proposed, but only a few can guarantee optimal solutions. To address this challenge, this article focuses on optimal any-angle path planning on grids and introduces two general techniques that accelerate computation while preserving optimality in both static and dynamic environments: 1) elliptical forward expansion, which leverages ellipse-based neighborhoods to restrict the search space, and 2) field of view, which replaces traditional line-of-sight methods to speed up visibility checks. To integrate these two techniques, inverted and forward scanning are introduced. Inverted scanning establishes visual connections from open nodes, whereas forward scanning initiates scans from closed nodes. Building on the proposed techniques, Zeta* and Zeta*-SIPP are developed for static and dynamic environments respectively. Zeta*, when combined with forward scanning, is similar to the state-of-the-art algorithm Anya and attains comparable performance. Unlike Anya, Zeta* can be readily extended to other settings. For example, Zeta*-SIPP, which extends Zeta* by integrating Safe Interval Path Planning (SIPP), can find time-optimal any-angle paths in dynamic environments. Benchmarking results show that Zeta*-SIPP achieves more than an order-of-magnitude speedup over the state-of-the-art optimal planner TO-AA-SIPP when using either scanning method. Overall, this research identifies the key requirements for achieving optimal any-angle path planning and introduces a unified approach suitable for different environments.