Computer Vision
Papers
Fresh from arXiv, typeset properly. Highlighted words trade on the market.
Friday 24 October
Deep learning models have achieved remarkable accuracy in chest X-ray diagnosis, yet their widespread clinical adoption remains limited by the black-box nature of their predictions. Clinicians require transparent, verifiable explanations to trust automated diagnoses and identify potential failure modes. We introduce CXR-LanIC (Language-Grounded Interpretable Classifier for Chest X-rays), a novel framework that addresses this interpretability challenge through task-aligned pattern discovery. Our approach trains transcoder-based sparse autoencoders on a BiomedCLIP diagnostic classifier to decompose medical image representations into interpretable visual patterns. By training an ensemble of 100 transcoders on multimodal embeddings from the MIMIC-CXR dataset, we discover approximately 5,000 monosemantic patterns spanning cardiac, pulmonary, pleural, structural, device, and artifact categories. Each pattern exhibits consistent activation behavior across images sharing specific radiological features, enabling transparent attribution where predictions decompose into 20-50 interpretable patterns with verifiable activation galleries. CXR-LanIC achieves competitive diagnostic accuracy on five key findings while providing the foundation for natural language explanations through planned large multimodal model annotation. Our key innovation lies in extracting interpretable features from a classifier trained on specific diagnostic objectives rather than general-purpose embeddings, ensuring discovered patterns are directly relevant to clinical decision-making, demonstrating that medical AI systems can be both accurate and interpretable, supporting safer clinical deployment through transparent, clinically grounded explanations.
Computer Vision
Enhancing Video Inpainting with Aligned Frame Interval Guidance
Recent image-to-video (I2V) based video inpainting methods have made significant strides by leveraging single-image priors and modeling temporal consistency across masked frames. Nevertheless, these methods suffer from severe content degradation within video chunks. Furthermore, the absence of a robust frame alignment scheme compromises intra-chunk and inter-chunk spatiotemporal stability, resulting in insufficient control over the entire video. To address these limitations, we propose VidPivot, a novel framework that decouples video inpainting into two sub-tasks: multi-frame consistent image inpainting and masked area motion propagation. Our approach introduces frame interval priors as spatiotemporal cues to guide the inpainting process. To enhance cross-frame coherence, we design a FrameProp Module that implements a frame content propagation strategy, diffusing reference frame content into subsequent frames via a splicing mechanism. Additionally, a dedicated context controller encodes these coherent frame priors into the I2V generative backbone, effectively serving as soft constrain to suppress content distortion during generation. Extensive evaluations demonstrate that VidPivot achieves competitive performance across diverse benchmarks and generalizes well to different video inpainting scenarios.
Read the full abstract
Computer Vision
MoniTor: Exploiting Large Language Models with Instruction for Online Video Anomaly Detection
Video Anomaly Detection (VAD) aims to locate unusual activities or behaviors within videos. Recently, offline VAD has garnered substantial research attention, which has been invigorated by the progress in large language models (LLMs) and vision-language models (VLMs), offering the potential for a more nuanced understanding of anomalies. However, online VAD has seldom received attention due to real-time constraints and computational intensity. In this paper, we introduce a novel Memory-based online scoring queue scheme for Training-free VAD (MoniTor), to address the inherent complexities in online VAD. Specifically, MoniTor applies a streaming input to VLMs, leveraging the capabilities of pre-trained large-scale models. To capture temporal dependencies more effectively, we incorporate a novel prediction mechanism inspired by Long Short-Term Memory (LSTM) networks. This ensures the model can effectively model past states and leverage previous predictions to identify anomalous behaviors. Thereby, it better understands the current frame. Moreover, we design a scoring queue and an anomaly prior to dynamically store recent scores and cover all anomalies in the monitoring scenario, providing guidance for LLMs to distinguish between normal and abnormal behaviors over time. We evaluate MoniTor on two large datasets (i.e., UCF-Crime and XD-Violence) containing various surveillance and real-world scenarios. The results demonstrate that MoniTor outperforms state-of-the-art methods and is competitive with weakly supervised methods without training. Code is available at https://github.com/YsTvT/MoniTor.
Read the full abstract
Computer Vision
PhysWorld: From Real Videos to World Models of Deformable Objects via Physics-Aware Demonstration Synthesis
Interactive world models that simulate object dynamics are crucial for robotics, VR, and AR. However, it remains a significant challenge to learn physics-consistent dynamics models from limited real-world video data, especially for deformable objects with spatially-varying physical properties. To overcome the challenge of data scarcity, we propose PhysWorld, a novel framework that utilizes a simulator to synthesize physically plausible and diverse demonstrations to learn efficient world models. Specifically, we first construct a physics-consistent digital twin within MPM simulator via constitutive model selection and global-to-local optimization of physical properties. Subsequently, we apply part-aware perturbations to the physical properties and generate various motion patterns for the digital twin, synthesizing extensive and diverse demonstrations. Finally, using these demonstrations, we train a lightweight GNN-based world model that is embedded with physical properties. The real video can be used to further refine the physical properties. PhysWorld achieves accurate and fast future predictions for various deformable objects, and also generalizes well to novel interactions. Experiments show that PhysWorld has competitive performance while enabling inference speeds 47 times faster than the recent state-of-the-art method, i.e., PhysTwin.
Read the full abstract
Computer Vision · Cross-listed from cs.CL
REMONI: An Autonomous System Integrating Wearables and Multimodal Large Language Models for Enhanced Remote Health Monitoring
With the widespread adoption of wearable devices in our daily lives, the demand and appeal for remote patient monitoring have significantly increased. Most research in this field has concentrated on collecting sensor data, visualizing it, and analyzing it to detect anomalies in specific diseases such as diabetes, heart disease and depression. However, this domain has a notable gap in the aspect of human-machine interaction. This paper proposes REMONI, an autonomous REmote health MONItoring system that integrates multimodal large language models (MLLMs), the Internet of Things (IoT), and wearable devices. The system automatically and continuously collects vital signs, accelerometer data from a special wearable (such as a smartwatch), and visual data in patient video clips collected from cameras. This data is processed by an anomaly detection module, which includes a fall detection model and algorithms to identify and alert caregivers of the patient's emergency conditions. A distinctive feature of our proposed system is the natural language processing component, developed with MLLMs capable of detecting and recognizing a patient's activity and emotion while responding to healthcare worker's inquiries. Additionally, prompt engineering is employed to integrate all patient information seamlessly. As a result, doctors and nurses can access real-time vital signs and the patient's current state and mood by interacting with an intelligent agent through a user-friendly web application. Our experiments demonstrate that our system is implementable and scalable for real-life scenarios, potentially reducing the workload of medical professionals and healthcare costs. A full-fledged prototype illustrating the functionalities of the system has been developed and being tested to demonstrate the robustness of its various capabilities.
Read the full abstract
Computer Vision
OpenHype: Hyperbolic Embeddings for Hierarchical Open-Vocabulary Radiance Fields
Modeling the inherent hierarchical structure of 3D objects and 3D scenes is highly desirable, as it enables a more holistic understanding of environments for autonomous agents. Accomplishing this with implicit representations, such as Neural Radiance Fields, remains an unexplored challenge. Existing methods that explicitly model hierarchical structures often face significant limitations: they either require multiple rendering passes to capture embeddings at different levels of granularity, significantly increasing inference time, or rely on predefined, closed-set discrete hierarchies that generalize poorly to the diverse and nuanced structures encountered by agents in the real world. To address these challenges, we propose OpenHype, a novel approach that represents scene hierarchies using a continuous hyperbolic latent space. By leveraging the properties of hyperbolic geometry, OpenHype naturally encodes multi-scale relationships and enables smooth traversal of hierarchies through geodesic paths in latent space. Our method outperforms state-of-the-art approaches on standard benchmarks, demonstrating superior efficiency and adaptability in 3D scene understanding.
Read the full abstract
Computer Vision
Anisotropic Pooling for LUT-realizable CNN Image Restoration
Table look-up realization of image restoration CNNs has the potential of achieving competitive image quality while being much faster and resource frugal than the straightforward CNN implementation. The main technical challenge facing the LUT-based CNN algorithm designers is to manage the table size without overly restricting the receptive field. The prevailing strategy is to reuse the table for small pixel patches of different orientations (apparently assuming a degree of isotropy) and then fuse the look-up results. The fusion is currently done by average pooling, which we find being ill suited to anisotropic signal structures. To alleviate the problem, we investigate and discuss anisotropic pooling methods to replace naive averaging for improving the performance of the current LUT-realizable CNN restoration methods. First, we introduce the method of generalized median pooling which leads to measurable gains over average pooling. We then extend this idea by learning data-dependent pooling coefficients for each orientation, so that they can adaptively weigh the contributions of differently oriented pixel patches. Experimental results on various restoration benchmarks show that our anisotropic pooling strategy yields both perceptually and numerically superior results compared to existing LUT-realizable CNN methods.
Read the full abstract
Computer Vision
ArtiLatent: Realistic Articulated 3D Object Generation via Structured Latents
We propose ArtiLatent, a generative framework that synthesizes human-made 3D objects with fine-grained geometry, accurate articulation, and realistic appearance. Our approach jointly models part geometry and articulation dynamics by embedding sparse voxel representations and associated articulation properties, including joint type, axis, origin, range, and part category, into a unified latent space via a variational autoencoder. A latent diffusion model is then trained over this space to enable diverse yet physically plausible sampling. To reconstruct photorealistic 3D shapes, we introduce an articulation-aware Gaussian decoder that accounts for articulation-dependent visibility changes (e.g., revealing the interior of a drawer when opened). By conditioning appearance decoding on articulation state, our method assigns plausible texture features to regions that are typically occluded in static poses, significantly improving visual realism across articulation configurations. Extensive experiments on furniture-like objects from PartNet-Mobility and ACD datasets demonstrate that ArtiLatent outperforms existing approaches in geometric consistency and appearance fidelity. Our framework provides a scalable solution for articulated 3D object synthesis and manipulation.
Read the full abstract
Computer Vision · Cross-listed from cs.CL
Vision Language Models for Dynamic Human Activity Recognition in Healthcare Settings
As generative AI continues to evolve, Vision Language Models (VLMs) have emerged as promising tools in various healthcare applications. One area that remains relatively underexplored is their use in human activity recognition (HAR) for remote health monitoring. VLMs offer notable strengths, including greater flexibility and the ability to overcome some of the constraints of traditional deep learning models. However, a key challenge in applying VLMs to HAR lies in the difficulty of evaluating their dynamic and often non-deterministic outputs. To address this gap, we introduce a descriptive caption data set and propose comprehensive evaluation methods to evaluate VLMs in HAR. Through comparative experiments with state-of-the-art deep learning models, our findings demonstrate that VLMs achieve comparable performance and, in some cases, even surpass conventional approaches in terms of accuracy. This work contributes a strong benchmark and opens new possibilities for the integration of VLMs into intelligent healthcare systems.
Read the full abstract
Computer Vision
Bridging the gap to real-world language-grounded visual concept learning
Human intelligence effortlessly interprets visual scenes along a rich spectrum of semantic dimensions. However, existing approaches to language-grounded visual concept learning are limited to a few predefined primitive axes, such as color and shape, and are typically explored in synthetic datasets. In this work, we propose a scalable framework that adaptively identifies image-related concept axes and grounds visual concepts along these axes in real-world scenes. Leveraging a pretrained vision-language model and our universal prompting strategy, our framework identifies a diverse image-related axes without any prior knowledge. Our universal concept encoder adaptively binds visual features to the discovered axes without introducing additional model parameters for each concept. To ground visual concepts along the discovered axes, we optimize a compositional anchoring objective, which ensures that each axis can be independently manipulated without affecting others. We demonstrate the effectiveness of our framework on subsets of ImageNet, CelebA-HQ, and AFHQ, showcasing superior editing capabilities across diverse real-world concepts that are too varied to be manually predefined. Our method also exhibits strong compositional generalization, outperforming existing visual concept learning and text-based editing methods. The code is available at https://github.com/whieya/Language-grounded-VCL.
Read the full abstract
Computer Vision
MUVR: A Multi-Modal Untrimmed Video Retrieval Benchmark with Multi-Level Visual Correspondence
We propose the Multi-modal Untrimmed Video Retrieval task, along with a new benchmark (MUVR) to advance video retrieval for long-video platforms. MUVR aims to retrieve untrimmed videos containing relevant segments using multi-modal queries. It has the following features: 1) Practical retrieval paradigm: MUVR supports video-centric multi-modal queries, expressing fine-grained retrieval needs through long text descriptions, video tag prompts, and mask prompts. It adopts a one-to-many retrieval paradigm and focuses on untrimmed videos, tailored for long-video platform applications. 2) Multi-level visual correspondence: To cover common video categories (e.g., news, travel, dance) and precisely define retrieval matching criteria, we construct multi-level visual correspondence based on core video content (e.g., news events, travel locations, dance moves) which users are interested in and want to retrieve. It covers six levels: copy, event, scene, instance, action, and others. 3) Comprehensive evaluation criteria: We develop 3 versions of MUVR (i.e., Base, Filter, QA). MUVR-Base/Filter evaluates retrieval models, while MUVR-QA assesses MLLMs in a question-answering format. We also propose a Reranking Score to evaluate the reranking ability of MLLMs. MUVR consists of 53K untrimmed videos from the video platform Bilibili, with 1,050 multi-modal queries and 84K matches. Extensive evaluations of 3 state-of-the-art video retrieval models, 6 image-based VLMs, and 10 MLLMs are conducted. MUVR reveals the limitations of retrieval methods in processing untrimmed videos and multi-modal queries, as well as MLLMs in multi-video understanding and reranking. Our code and benchmark is available at https://github.com/debby-0527/MUVR.
Read the full abstract
Computer Vision · Cross-listed from cs.LG
Disentangled Representation Learning via Modular Compositional Bias
Recent disentangled representation learning (DRL) methods heavily rely on factor specific strategies-either learning objectives for attributes or model architectures for objects-to embed inductive biases. Such divergent approaches result in significant overhead when novel factors of variation do not align with prior assumptions, such as statistical independence or spatial exclusivity, or when multiple factors coexist, as practitioners must redesign architectures or objectives. To address this, we propose a compositional bias, a modular inductive bias decoupled from both objectives and architectures. Our key insight is that different factors obey distinct recombination rules in the data distribution: global attributes are mutually exclusive, e.g., a face has one nose, while objects share a common support (any subset of objects can co-exist). We therefore randomly remix latents according to factor-specific rules, i.e., a mixing strategy, and force the encoder to discover whichever factor structure the mixing strategy reflects through two complementary objectives: (i) a prior loss that ensures every remix decodes into a realistic image, and (ii) the compositional consistency loss introduced by Wiedemer et al. (arXiv:2310.05327), which aligns each composite image with its corresponding composite latent. Under this general framework, simply adjusting the mixing strategy enables disentanglement of attributes, objects, and even both, without modifying the objectives or architectures. Extensive experiments demonstrate that our method shows competitive performance in both attribute and object disentanglement, and uniquely achieves joint disentanglement of global style and objects. Code is available at https://github.com/whieya/Compositional-DRL.
Read the full abstract
Computer Vision
Depth-Supervised Fusion Network for Seamless-Free Image Stitching
Image stitching synthesizes images captured from multiple perspectives into a single image with a broader field of view. The significant variations in object depth often lead to large parallax, resulting in ghosting and misalignment in the stitched results. To address this, we propose a depth-consistency-constrained seamless-free image stitching method. First, to tackle the multi-view alignment difficulties caused by parallax, a multi-stage mechanism combined with global depth regularization constraints is developed to enhance the alignment accuracy of the same apparent target across different depth ranges. Second, during the multi-view image fusion process, an optimal stitching seam is determined through graph-based low-cost computation, and a soft-seam region is diffused to precisely locate transition areas, thereby effectively mitigating alignment errors induced by parallax and achieving natural and seamless stitching results. Furthermore, considering the computational overhead in the shift regression process, a reparameterization strategy is incorporated to optimize the structural design, significantly improving algorithm efficiency while maintaining optimal performance. Extensive experiments demonstrate the superior performance of the proposed method against the existing methods. Code is available at https://github.com/DLUT-YRH/DSFN.
Read the full abstract
Computer Vision
TerraGen: A Unified Multi-Task Layout Generation Framework for Remote Sensing Data Augmentation
Remote sensing vision tasks require extensive labeled data across multiple, interconnected domains. However, current generative data augmentation frameworks are task-isolated, i.e., each vision task requires training an independent generative model, and ignores the modeling of geographical information and spatial constraints. To address these issues, we propose TerraGen, a unified layout-to-image generation framework that enables flexible, spatially controllable synthesis of remote sensing imagery for various high-level vision tasks, e.g., detection, segmentation, and extraction. Specifically, TerraGen introduces a geographic-spatial layout encoder that unifies bounding box and segmentation mask inputs, combined with a multi-scale injection scheme and mask-weighted loss to explicitly encode spatial constraints, from global structures to fine details. Also, we construct the first large-scale multi-task remote sensing layout generation dataset containing 45k images and establish a standardized evaluation protocol for this task. Experimental results show that our TerraGen can achieve the best generation image quality across diverse tasks. Additionally, TerraGen can be used as a universal data-augmentation generator, enhancing downstream task performance significantly and demonstrating robust cross-task generalisation in both full-data and few-shot scenarios.
Read the full abstract
Computer Vision
BADiff: Bandwidth Adaptive Diffusion Model
In this work, we propose a novel framework to enable diffusion models to adapt their generation quality based on real-time network bandwidth constraints. Traditional diffusion models produce high-fidelity images by performing a fixed number of denoising steps, regardless of downstream transmission limitations. However, in practical cloud-to-device scenarios, limited bandwidth often necessitates heavy compression, leading to loss of fine textures and wasted computation. To address this, we introduce a joint end-to-end training strategy where the diffusion model is conditioned on a target quality level derived from the available bandwidth. During training, the model learns to adaptively modulate the denoising process, enabling early-stop sampling that maintains perceptual quality appropriate to the target transmission condition. Our method requires minimal architectural changes and leverages a lightweight quality embedding to guide the denoising trajectory. Experimental results demonstrate that our approach significantly improves the visual fidelity of bandwidth-adapted generations compared to naive early-stopping, offering a promising solution for efficient image delivery in bandwidth-constrained environments. Code is available at: https://github.com/xzhang9308/BADiff.
Read the full abstract
Computer Vision · Cross-listed from cs.LG
FairImagen: Post-Processing for Bias Mitigation in Text-to-Image Models
Text-to-image diffusion models, such as Stable Diffusion, have demonstrated remarkable capabilities in generating high-quality and diverse images from natural language prompts. However, recent studies reveal that these models often replicate and amplify societal biases, particularly along demographic attributes like gender and race. In this paper, we introduce FairImagen (https://github.com/fuzihaofzh/FairImagen), a post-hoc debiasing framework that operates on prompt embeddings to mitigate such biases without retraining or modifying the underlying diffusion model. Our method integrates Fair Principal Component Analysis to project CLIP-based input embeddings into a subspace that minimizes group-specific information while preserving semantic content. We further enhance debiasing effectiveness through empirical noise injection and propose a unified cross-demographic projection method that enables simultaneous debiasing across multiple demographic attributes. Extensive experiments across gender, race, and intersectional settings demonstrate that FairImagen significantly improves fairness with a moderate trade-off in image quality and prompt fidelity. Our framework outperforms existing post-hoc methods and offers a simple, scalable, and model-agnostic solution for equitable text-to-image generation.
Read the full abstract
Computer Vision
Why Registration Quality Matters: Enhancing sCT Synthesis with IMPACT-Based Registration
We participated in the SynthRAD2025 challenge (Tasks 1 and 2) with a unified pipeline for synthetic CT (sCT) generation from MRI and CBCT, implemented using the KonfAI framework. Our model is a 2.5D U-Net++ with a ResNet-34 encoder, trained jointly across anatomical regions and fine-tuned per region. The loss function combined pixel-wise L1 loss with IMPACT-Synth, a perceptual loss derived from SAM and TotalSegmentator to enhance structural fidelity. Training was performed using AdamW (initial learning rate = 0.001, halved every 25k steps) on patch-based, normalized, body-masked inputs (320x320 for MRI, 256x256 for CBCT), with random flipping as the only augmentation. No post-processing was applied. Final predictions leveraged test-time augmentation and five-fold ensembling. The best model was selected based on validation MAE. Two registration strategies were evaluated: (i) Elastix with mutual information, consistent with the challenge pipeline, and (ii) IMPACT, a feature-based similarity metric leveraging pretrained segmentation networks. On the local test sets, IMPACT-based registration achieved more accurate and anatomically consistent alignments than mutual-information-based registration, resulting in improved sCT synthesis with lower MAE and more realistic anatomical structures. On the public validation set, however, models trained with Elastix-aligned data achieved higher scores, reflecting a registration bias favoring alignment strategies consistent with the evaluation pipeline. This highlights how registration errors can propagate into supervised learning, influencing both training and evaluation, and potentially inflating performance metrics at the expense of anatomical fidelity. By promoting anatomically consistent alignment, IMPACT helps mitigate this bias and supports the development of more robust and generalizable sCT synthesis models.
Read the full abstract
Computer Vision
Gaze-VLM:Bridging Gaze and VLMs through Attention Regularization for Egocentric Understanding
Eye gaze offers valuable cues about attention, short-term intent, and future actions, making it a powerful signal for modeling egocentric behavior. In this work, we propose a gaze-regularized framework that enhances VLMs for two key egocentric understanding tasks: fine-grained future event prediction and current activity understanding. Unlike prior approaches that rely solely on visual inputs or use gaze as an auxiliary input signal , our method uses gaze only during training. We introduce a gaze-regularized attention mechanism that aligns model focus with human visual gaze. This design is flexible and modular, allowing it to generalize across multiple VLM architectures that utilize attention. Experimental results show that our approach improves semantic prediction scores by up to 11 for future event prediction and around 7 for current activity understanding, compared to the corresponding baseline models trained without gaze regularization. These results highlight the value of gaze-guided training in improving the accuracy and robustness of egocentric VLMs. Overall, this work establishes a foundation for using human gaze to enhance the predictive capabilities of VLMs in real-world scenarios like assistive robots and human-machine collaboration. Code and additional information is available at: https://github.com/anupampani/Gaze-VLM
Read the full abstract
Computer Vision
Dynamic Semantic-Aware Correlation Modeling for UAV Tracking
UAV tracking can be widely applied in scenarios such as disaster rescue, environmental monitoring, and logistics transportation. However, existing UAV tracking methods predominantly emphasize speed and lack exploration in semantic awareness, which hinders the search region from extracting accurate localization information from the template. The limitation results in suboptimal performance under typical UAV tracking challenges such as camera motion, fast motion, and low resolution, etc. To address this issue, we propose a dynamic semantic aware correlation modeling tracking framework. The core of our framework is a Dynamic Semantic Relevance Generator, which, in combination with the correlation map from the Transformer, explore semantic relevance. The approach enhances the search region's ability to extract important information from the template, improving accuracy and robustness under the aforementioned challenges. Additionally, to enhance the tracking speed, we design a pruning method for the proposed framework. Therefore, we present multiple model variants that achieve trade-offs between speed and accuracy, enabling flexible deployment according to the available computational resources. Experimental results validate the effectiveness of our method, achieving competitive performance on multiple UAV tracking datasets. The code is available at https://github.com/zxyyxzz/DSATrack.
Read the full abstract
Computer Vision
CT-CLIP: A Multi-modal Fusion Framework for Robust Apple Leaf Disease Recognition in Complex Environments
In complex orchard environments, the phenotypic heterogeneity of different apple leaf diseases, characterized by significant variation among lesions, poses a challenge to traditional multi-scale feature fusion methods. These methods only integrate multi-layer features extracted by convolutional neural networks (CNNs) and fail to adequately account for the relationships between local and global features. Therefore, this study proposes a multi-branch recognition framework named CNN-Transformer-CLIP (CT-CLIP). The framework synergistically employs a CNN to extract local lesion detail features and a Vision Transformer to capture global structural relationships. An Adaptive Feature Fusion Module (AFFM) then dynamically fuses these features, achieving optimal coupling of local and global information and effectively addressing the diversity in lesion morphology and distribution. Additionally, to mitigate interference from complex backgrounds and significantly enhance recognition accuracy under few-shot conditions, this study proposes a multimodal image-text learning approach. By leveraging pre-trained CLIP weights, it achieves deep alignment between visual features and disease semantic descriptions. Experimental results show that CT-CLIP achieves accuracies of 97.38% and 96.12% on a publicly available apple disease and a self-built dataset, outperforming several baseline methods. The proposed CT-CLIP demonstrates strong capabilities in recognizing agricultural diseases, significantly enhances identification accuracy under complex environmental conditions, provides an innovative and practical solution for automated disease recognition in agricultural applications.
Read the full abstract
Computer Vision
Morphologically Intelligent Perturbation Prediction with FORM
Understanding how cells respond to external stimuli is a central challenge in biomedical research and drug development. Current computational frameworks for modelling cellular responses remain restricted to two-dimensional representations, limiting their capacity to capture the complexity of cell morphology under perturbation. This dimensional constraint poses a critical bottleneck for the development of accurate virtual cell models. Here, we present FORM, a machine learning framework for predicting perturbation-induced changes in three-dimensional cellular structure. FORM consists of two components: a morphology encoder, trained end-to-end via a novel multi-channel VQGAN to learn compact 3D representations of cell shape, and a diffusion-based perturbation trajectory module that captures how morphology evolves across perturbation conditions. Trained on a large-scale dataset of over 65,000 multi-fluorescence 3D cell volumes spanning diverse chemical and genetic perturbations, FORM supports both unconditional morphology synthesis and conditional simulation of perturbed cell states. Beyond generation, FORM can predict downstream signalling activity, simulate combinatorial perturbation effects, and model morphodynamic transitions between states of unseen perturbations. To evaluate performance, we introduce MorphoEval, a benchmarking suite that quantifies perturbation-induced morphological changes in structural, statistical, and biological dimensions. Together, FORM and MorphoEval work toward the realisation of the 3D virtual cell by linking morphology, perturbation, and function through high-resolution predictive simulation.
Read the full abstract
Computer Vision
VL-SAE: Interpreting and Enhancing Vision-Language Alignment with a Unified Concept Set
The alignment of vision-language representations endows current Vision-Language Models (VLMs) with strong multi-modal reasoning capabilities. However, the interpretability of the alignment component remains uninvestigated due to the difficulty in mapping the semantics of multi-modal representations into a unified concept set. To address this problem, we propose VL-SAE, a sparse autoencoder that encodes vision-language representations into its hidden activations. Each neuron in its hidden layer correlates to a concept represented by semantically similar images and texts, thereby interpreting these representations with a unified concept set. To establish the neuron-concept correlation, we encourage semantically similar representations to exhibit consistent neuron activations during self-supervised training. First, to measure the semantic similarity of multi-modal representations, we perform their alignment in an explicit form based on cosine similarity. Second, we construct the VL-SAE with a distance-based encoder and two modality-specific decoders to ensure the activation consistency of semantically similar representations. Experiments across multiple VLMs (e.g., CLIP, LLaVA) demonstrate the superior capability of VL-SAE in interpreting and enhancing the vision-language alignment. For interpretation, the alignment between vision and language representations can be understood by comparing their semantics with concepts. For enhancement, the alignment can be strengthened by aligning vision-language representations at the concept level, contributing to performance improvements in downstream tasks, including zero-shot image classification and hallucination elimination. Codes are available at https://github.com/ssfgunner/VL-SAE.
Read the full abstract
Computer Vision
FineRS: Fine-grained Reasoning and Segmentation of Small Objects with Reinforcement Learning
Multi-modal Large Language Models (MLLMs) have shown remarkable capabilities across a wide range of vision-language tasks. However, due to the restricted input resolutions, MLLMs face significant challenges in precisely understanding and localizing visual details in high-resolution images – particularly when dealing with extra-small objects embedded in cluttered contexts. To address this issue, we propose FineRS, a two-stage MLLM-based reinforcement learning framework for jointly reasoning and segmenting extremely small objects within high-resolution scenes. FineRS adopts a coarse-to-fine pipeline comprising Global Semantic Exploration (GSE) and Localized Perceptual Refinement (LPR). Specifically, GSE performs instruction-guided reasoning to generate a textural response and a coarse target region, while LPR refines this region to produce an accurate bounding box and segmentation mask. To couple the two stages, we introduce a locate-informed retrospective reward, where LPR's outputs are used to optimize GSE for more robust coarse region exploration. % Additionally, we present FineRS-4k, a new dataset for evaluating MLLMs on attribute-level reasoning and pixel-level segmentation on subtle, small-scale targets in complex high-resolution scenes. Experimental results on FineRS-4k and public datasets demonstrate that our method consistently outperforms state-of-the-art MLLM-based approaches on both instruction-guided segmentation and visual reasoning tasks.
Read the full abstract
Computer Vision
Towards Physically Executable 3D Gaussian for Embodied Navigation
3D Gaussian Splatting (3DGS), a 3D representation method with photorealistic real-time rendering capabilities, is regarded as an effective tool for narrowing the sim-to-real gap. However, it lacks fine-grained semantics and physical executability for Visual-Language Navigation (VLN). To address this, we propose SAGE-3D (Semantically and Physically Aligned Gaussian Environments for 3D Navigation), a new paradigm that upgrades 3DGS into an executable, semantically and physically aligned environment. It comprises two components: (1) Object-Centric Semantic Grounding, which adds object-level fine-grained annotations to 3DGS; and (2) Physics-Aware Execution Jointing, which embeds collision objects into 3DGS and constructs rich physical interfaces. We release InteriorGS, containing 1K object-annotated 3DGS indoor scene data, and introduce SAGE-Bench, the first 3DGS-based VLN benchmark with 2M VLN data. Experiments show that 3DGS scene data is more difficult to converge, while exhibiting strong generalizability, improving baseline performance by 31% on the VLN-CE Unseen task. Our data and code are available at: https://sage-3d.github.io.
Read the full abstract
Computer Vision · Cross-listed from q-bio.QM
Physics-Informed Deep Learning for Improved Input Function Estimation in Motion-Blurred Dynamic [${}^{18}$F]FDG PET Images
Kinetic modeling enables in vivo quantification of tracer uptake and glucose metabolism in [${}^{18}$F]Fluorodeoxyglucose ([${}^{18}$F]FDG) dynamic positron emission tomography (dPET) imaging of mice. However, kinetic modeling requires the accurate determination of the arterial input function (AIF) during imaging, which is time-consuming and invasive. Recent studies have shown the efficacy of using deep learning to directly predict the input function, surpassing established methods such as the image-derived input function (IDIF). In this work, we trained a physics-informed deep learning-based input function prediction model (PIDLIF) to estimate the AIF directly from the PET images, incorporating a kinetic modeling loss during training. The proposed method uses a two-tissue compartment model over two regions, the myocardium and brain of the mice, and is trained on a dataset of 70 [${}^{18}$F]FDG dPET images of mice accompanied by the measured AIF during imaging. The proposed method had comparable performance to the network without a physics-informed loss, and when sudden movement causing blurring in the images was simulated, the PIDLIF model maintained high performance in severe cases of image degradation. The proposed physics-informed method exhibits an improved robustness that is promoted by physically constraining the problem, enforcing consistency for out-of-distribution samples. In conclusion, the PIDLIF model offers insight into the effects of leveraging physiological distribution mechanics in mice to guide a deep learning-based AIF prediction network in images with severe degradation as a result of blurring due to movement during imaging.
Read the full abstract
Computer Vision · Cross-listed from cs.LG
Buffer layers for Test-Time Adaptation
In recent advancements in Test Time Adaptation (TTA), most existing methodologies focus on updating normalization layers to adapt to the test domain. However, the reliance on normalization-based adaptation presents key challenges. First, normalization layers such as Batch Normalization (BN) are highly sensitive to small batch sizes, leading to unstable and inaccurate statistics. Moreover, normalization-based adaptation is inherently constrained by the structure of the pre-trained model, as it relies on training-time statistics that may not generalize well to unseen domains. These issues limit the effectiveness of normalization-based TTA approaches, especially under significant domain shift. In this paper, we introduce a novel paradigm based on the concept of a Buffer layer, which addresses the fundamental limitations of normalization layer updates. Unlike existing methods that modify the core parameters of the model, our approach preserves the integrity of the pre-trained backbone, inherently mitigating the risk of catastrophic forgetting during online adaptation. Through comprehensive experimentation, we demonstrate that our approach not only outperforms traditional methods in mitigating domain shift and enhancing model robustness, but also exhibits strong resilience to forgetting. Furthermore, our Buffer layer is modular and can be seamlessly integrated into nearly all existing TTA frameworks, resulting in consistent performance improvements across various architectures. These findings validate the effectiveness and versatility of the proposed solution in real-world domain adaptation scenarios. The code is available at https://github.com/hyeongyu-kim/Buffer_TTA.
Read the full abstract
Computer Vision · Cross-listed from cs.CL
Sparser Block-Sparse Attention via Token Permutation
Scaling the context length of large language models (LLMs) offers significant benefits but is computationally expensive. This expense stems primarily from the self-attention mechanism, whose $O(N^2)$ complexity with respect to sequence length presents a major bottleneck for both memory and latency. Fortunately, the attention matrix is often sparse, particularly for long sequences, suggesting an opportunity for optimization. Block-sparse attention has emerged as a promising solution that partitions sequences into blocks and skips computation for a subset of these blocks. However, the effectiveness of this method is highly dependent on the underlying attention patterns, which can lead to sub-optimal block-level sparsity. For instance, important key tokens for queries within a single block may be scattered across numerous other blocks, leading to computational redundancy. In this work, we propose Permuted Block-Sparse Attention (PBS-Attn), a plug-and-play method that leverages the permutation properties of attention to increase block-level sparsity and enhance the computational efficiency of LLM prefilling. We conduct comprehensive experiments on challenging real-world long-context datasets, demonstrating that PBS-Attn consistently outperforms existing block-sparse attention methods in model accuracy and closely matches the full attention baseline. Powered by our custom permuted-FlashAttention kernels, PBS-Attn achieves an end-to-end speedup of up to $2.75\times$ in long-context prefilling, confirming its practical viability. Code available at https://github.com/xinghaow99/pbs-attn
Read the full abstract
Computer Vision
Topology Sculptor, Shape Refiner: Discrete Diffusion Model for High-Fidelity 3D Meshes Generation
In this paper, we introduce Topology Sculptor, Shape Refiner (TSSR), a novel method for generating high-quality, artist-style 3D meshes based on Discrete Diffusion Models (DDMs). Our primary motivation for TSSR is to achieve highly accurate token prediction while enabling parallel generation, a significant advantage over sequential autoregressive methods. By allowing TSSR to "see" all mesh tokens concurrently, we unlock a new level of efficiency and control. We leverage this parallel generation capability through three key innovations: 1) Decoupled Training and Hybrid Inference, which distinctly separates the DDM-based generation into a topology sculpting stage and a subsequent shape refinement stage. This strategic decoupling enables TSSR to effectively capture both intricate local topology and overarching global shape. 2) An Improved Hourglass Architecture, featuring bidirectional attention enriched by face-vertex-sequence level Rotational Positional Embeddings (RoPE), thereby capturing richer contextual information across the mesh structure. 3) A novel Connection Loss, which acts as a topological constraint to further enhance the realism and fidelity of the generated meshes. Extensive experiments on complex datasets demonstrate that TSSR generates high-quality 3D artist-style meshes, capable of achieving up to 10,000 faces at a remarkable spatial resolution of $1024^3$. The code will be released at: https://github.com/psky1111/Tencent-TSSR.
Read the full abstract
Computer Vision
Improved Training Technique for Shortcut Models
Shortcut models represent a promising, non-adversarial paradigm for generative modeling, uniquely supporting one-step, few-step, and multi-step sampling from a single trained network. However, their widespread adoption has been stymied by critical performance bottlenecks. This paper tackles the five core issues that held shortcut models back: (1) the hidden flaw of compounding guidance, which we are the first to formalize, causing severe image artifacts; (2) inflexible fixed guidance that restricts inference-time control; (3) a pervasive frequency bias driven by a reliance on low-level distances in the direct domain, which biases reconstructions toward low frequencies; (4) divergent self-consistency arising from a conflict with EMA training; and (5) curvy flow trajectories that impede convergence. To address these challenges, we introduce iSM, a unified training framework that systematically resolves each limitation. Our framework is built on four key improvements: Intrinsic Guidance provides explicit, dynamic control over guidance strength, resolving both compounding guidance and inflexibility. A Multi-Level Wavelet Loss mitigates frequency bias to restore high-frequency details. Scaling Optimal Transport (sOT) reduces training variance and learns straighter, more stable generative paths. Finally, a Twin EMA strategy reconciles training stability with self-consistency. Extensive experiments on ImageNet 256 x 256 demonstrate that our approach yields substantial FID improvements over baseline shortcut models across one-step, few-step, and multi-step generation, making shortcut models a viable and competitive class of generative models.
Read the full abstract
Computer Vision
3rd Place Solution to Large-scale Fine-grained Food Recognition
Food analysis is becoming a hot topic in health area, in which fine-grained food recognition task plays an important role. In this paper, we describe the details of our solution to the LargeFineFoodAI-ICCV Workshop-Recognition challenge held on Kaggle. We find a proper combination of Arcface loss[1] and Circle loss[9] can bring improvement to the performance. With Arcface and the combined loss, model was trained with carefully tuned configurations and ensembled to get the final results. Our solution won the 3rd place in the competition.