Robotics
Papers
Fresh from arXiv, typeset properly. Highlighted words trade on the market.
Monday 13 July
Onboard quadruped inspection systems often share limited compute between perception and navigation, reducing the rate at which event-triggered controllers evaluate proprioceptive signals. We study this latency in stair-summit detection and propose a climb–settle “stop-to-decide” cadence for structured, mapping-free inspection. On a Unitree Go2, the integrated stair loop ran at $\approx$15 Hz. On a three-level stepped platform whose 50 cm top was shorter than the robot, continuous-climb overshoot increased with per-period advance $v/f$, whereas the climb–settle cadence held observed overshoot near zero (22/45 vs 1/45 pooled over $\approx$30/20/15 Hz; Fisher $p\approx2.4\times10^{-7}$). A logistic dose–response model gives a model-based critical rate of $\approx$19 Hz at 0.30 m/s; a pre-specified 40 Hz held-out check was consistent with the protocol-clean fit. We integrated the detector with line following and a three-segment 90$^\circ$ corridor maneuver in a fully onboard, learning-free stack using an IMU, foot-force sensing, three 1-D ranges, and one line camera. The corridor maneuver completed 20/20 trials without contact, compared with 14/20 completions and 12 wall contacts for in-place yaw; the full course completed 18/20 trials. Results are limited to one calibrated course, robot, and operator but identify loop rate as a deployment parameter for proprioceptive event detection.
Robotics
GeoGS-SLAM: Online Monocular Reconstruction Using Gaussian Splatting with Geometric Priors
SLAM methods based on 3D Gaussian Splatting (3DGS) have demonstrated impressive tracking and mapping performance, but typically require additional geometric information from external depth sensors. Meanwhile, recent SLAM systems that leverage geometric priors from pre-trained feed-forward models enable real-time dense reconstruction, yet often discard original RGB information during optimization, thus degrading overall reconstruction quality. We present GeoGS-SLAM, an online monocular dense reconstruction system that combines the 3DGS-based map representation with learned geometric priors. Given uncalibrated RGB input, we first employ a feed-forward visual geometry model to predict camera and scene priors. The Gaussian scene map is then expanded by directly sampling Gaussian primitives from both RGB input and geometric priors. Camera poses and the scene map are jointly optimized through a coarse-to-fine strategy that minimizes both photometric and geometric losses. To ensure global consistency, we further incorporate online loop closure detection and pose graph optimization. Extensive experiments across indoor and outdoor benchmarks demonstrate that GeoGS-SLAM achieves superior rendering quality and tracking accuracy compared to state-of-the-art methods while maintaining online real-time performance. Project page: https://rlgao.github.io/geogs_slam.
Read the full abstract
Robotics
Pix2Act: Image-Space Manipulation Policies with Equivariant Augmentation
Representing manipulation actions as 2D trajectories in the camera plane provides a compact and interpretable basis for learning complex 3D manipulation policies. However, it also creates challenges from out-of-frame trajectories and limited precision. We propose Pix2Act, an imitation learning method that addresses these challenges by generating continuous image-space keypoint trajectories in each camera plane and losslessly recovering end-effector poses via triangulation. This reformulates high-dimensional 3D control as a simpler, more learnable 2D prediction problem. Crucially, it aligns observations and actions in the same coordinate space, enabling equivariant transformations to jointly rotate individual camera images together with their image-space actions. We analyze the symmetry properties of this augmentation and design a network architecture that can fuse multiple camera views while respecting their per-view rotations. As a result, Pix2Act implicitly enlarges the support of the data distribution and learns invariant action structures across transformations, yielding improved generalization and overall performance. Across diverse simulated and real-world manipulation tasks, Pix2Act outperforms state-of-the-art baselines and remains robust under camera perturbations.
Read the full abstract
Robotics
Comparison-Based Ordinal Learning for Proactive Driving Risk Assessment
Real-time driving risk assessment provides an essential basis for proactive safety by identifying and quantifying the danger of ongoing road interactions before adverse outcomes occur. However, due to the scarcity of collision data and frame-level risk labels, existing driving risk assessment methods often rely on surrogate objectives, which may imperfectly align with true collision risk and not faithfully reflect the relative danger of driving interaction. This paper proposes a comparison-based ordinal risk learning framework that learns collision-relevant risk scores from pairwise supervision in driving data, directly modeling relative risk ordering without requiring numerical frame-level risk labels. We derive pairwise comparisons from three sources of event-structured driving data for such ordinal risk learning: temporal progression within safety-critical sequences, event-level contrast between dangerous and normal interactions, and physics-based counterfactual perturbations. On this basis, instantiations with three risk-scoring function parameterizations are implemented, including directly learning risk scores from comparison data, and aligning existing single or multiple surrogate-based risk models. The proposed framework is evaluated on the 100-Car and SHRP2 naturalistic driving datasets using a proactive collision warning task. Results show that the proposed framework improves high-recall risk discrimination, warning precision, and warning lead time over representative surrogate-based baselines across both in-distribution and out-of-distribution evaluations. These results suggest that the proposed framework can contribute to proactive safety research by providing more reliable risk assessment for automated driving systems and safety-critical driving interactions.
Read the full abstract
Robotics
VIA: Visual Interface Agent for Robot Control
Robot manipulation is a complex task that requires visual perception, physical reasoning, planning, and closed-loop control. General-purpose foundation models (FMs) have grown remarkably capable of some of these, especially perception and reasoning. Inspired by the growing ability of FM-powered agents to operate software through visual interfaces, we ask whether that same competence suffices to control a robot directly given the right interface. We present VIA (Visual Interface Agent), a framework that recasts robot control as an agentic task where an off-the-shelf agent drives a manipulator directly through an interface. The interface is a virtual workspace of interactable visual components where the agent can probe pixels of interest with mouse-like tools and command a virtual end-effector to set new target poses with a small set of general tools. We show that VIA enables agents of varying capabilities to perform diverse tabletop manipulation tasks in simulation. We also use VIA to drive an off-the-shelf mobile manipulation robot in the real world to complete tasks that require both navigation and manipulation. Both settings are zero-shot, requiring no robot training or additional action primitives. Performance scales well with the size and strength of the underlying FMs. These results suggest that frontier agents already possess skills that transfer directly to robot control given the right interface: your coding or computer-use agent is, in a sense, secretly a robot-control agent.
Read the full abstract
Robotics
Desc++: Efficient Descriptor Enhancement for Data Association in Existing Visual SLAM Systems
Reliable visual data association is fundamental to visual SLAM (V-SLAM), as it directly determines the quality of the camera pose estimation and map consistency. However, the handcrafted descriptors used by most mature real-time systems degrade under illumination and viewpoint changes, while learning-based front-ends that address this weakness typically require replacing the extraction-and-matching pipeline and introduce substantial computational overhead. Descriptor enhancement offers a compromise by refining existing descriptors within their original format, yet current methods rely on simplified attention mechanisms whose limited contextual modeling constrains the achievable matching quality. To resolve this trade-off between contextual expressiveness and efficiency, we propose Desc++, a lightweight enhancement module that jointly encodes descriptor representations and keypoint geometry and aggregates spatial context through a hybrid architecture that combines order-agnostic global attention with geometry-aware sequential modeling in linear time. The enhanced descriptors retain their original dimensionality and matching interface, enabling integration into deployed V-SLAM systems without modifying the pipeline. Experiments across descriptor matching, correspondence analysis, and system-level benchmarks with four different V-SLAM systems demonstrate that Desc++ improves matching accuracy over the state-of-the-art enhancement method, translates these gains into more accurate and stable trajectory estimation, and achieves a favorable balance between accuracy and efficiency for practical integration into existing real-time V-SLAM pipelines.
Read the full abstract
Robotics
PAKE: Learning Whole-Body Loco-Manipulation with Partial Kinematic Embeddings
Loco-manipulation has recently shown promising capabilities; however, achieving high-precision control, managing the high-dimensional action space induced by many degrees of freedom (DoFs), and fully exploiting the inherent redundancy of whole-body systems remain challenging. In this paper, we propose a novel whole-body control framework that effectively addresses these challenges by decomposing the complex loco-manipulation problem into partial reference motion generation and low-level imitation control. We introduce a new Kinematic Normalizing Flow (KNF) model, trained on a large-scale kinematic dataset, that generates diverse partial kinematic references. A high-level controller is then trained to navigate the KNF's latent space to exploit redundant solutions, while a low-level controller learns dynamically consistent motion execution. We validate our approach on the quadrupedal robot equipped with a six-DoF robotic arm. In simulation, PAKE outperforms the evaluated baselines in tracking accuracy and feasible workspace coverage on the 4,000-target benchmark. For hardware deployment, we evaluate the system over 24 episodes across 8 different mobile loco-manipulation tasks. The system achieves end-effector pose-tracking errors of 4.5 cm and 0.14 rad, while maintaining accurate locomotion tracking with linear and angular velocity errors of 0.1 m/s and 0.01 rad/s, respectively. Our method represents a practical and powerful solution for accurate and generalized whole-body loco-manipulation in high-DoF robotic systems, with promising potential for diverse downstream robotic tasks.
Read the full abstract
Robotics
GraspGraphNet: Graph-Structured Multi-Embodiment Dexterous Grasp Generation
Dexterous grasp generation across robot hands is challenging because hands differ in kinematic topology, actuation dimensions, and native command spaces. We introduce GraspGraphNet, a topology-aware grasp generation framework that represents each hand as a URDF-derived kinematic graph and directly generates executable palm poses and joint configurations. GraspGraphNet combines hierarchical object surface encoding, differentiable forward kinematics, and dynamic world-edge message passing to model evolving robot-object interactions. It applies conditional flow matching directly in executable palm-pose and joint-state space, avoiding post-processing optimization, inverse kinematics, and retargeting. Using a shared model trained on Barrett Hand, Allegro Hand, and Shadow Hand, GraspGraphNet achieves an average success rate of 83.48% with 40ms inference time per grasp on a 40-object benchmark. Without retraining, the same model achieves 72.70% success on controlled finger-removal variants, demonstrating robustness to hand-topology variations. These results suggest that graph-structured hand representations can effectively support dexterous grasp generation across robot hands with different kinematic structures. Project: https://lysees.github.io/graspgraphnet-page
Read the full abstract
Robotics
Learning to Navigate with Minimal Parameters: Decomposing Visual Navigation Through Closed-Form Geometric Interfaces
Visual navigation policies have grown to hundreds of millions of parameters trained on billions of frames, with geometry, mapping, and control learned implicitly. We propose a decomposed point-goal navigation system in which operations with known closed-form structure, such as projective geometry, occupancy, and coordinate transforms, are computed analytically and serve as interfaces between three small learned modules: an egress predictor that grounds the episode goal as a local subgoal in the current view, a navigation predictor that estimates a goal-conditioned posterior over where trajectories travel, and an endpoint-pinned residual diffusion generator that samples trajectory shapes from this posterior. Only 0.58M out of 23M parameters are trained, on 44k frames, in under one GPU-hour. Across 6060 point-goal episodes in 60 environments, the system attains competitive success rates with the lowest collision rate among evaluated methods. We further show that under this decomposition, the frozen image encoder can be replaced by a 0.54M MobileNetV2 at a -2.0 SR cost, bringing the full system under 1.2M parameters. It also transfers to no-goal exploration by retraining only the 123k-parameter egress head, and its failure modes under sensor corruption are transparent and analytically correctable. We deploy and evaluate the system zero-shot on a low-cost UGV, running navigation and localization on a Jetson Orin Nano in real-time.
Read the full abstract
Robotics
SegDiff: Segmented Trajectory Diffusion for Consistent and Adaptive Robot Manipulation
Imitation learning enables robots to acquire manipulation skills from demonstrations by mapping observations to actions. Existing approaches predict either short-horizon continuous action sequences or discrete keyposes. However, continuous prediction methods suffer from compounding errors due to short prediction horizons and struggle with multi-modal action distributions, whereas keypose-based methods necessitate an external planner, constraining real-time applicability. To address these challenges, we introduce SegDiff, a closed-loop visuomotor policy that integrates the strengths of both paradigms. SegDiff decomposes demonstrations into motion segments between keyposes and learns to predict the continuous trajectory from the current state to the next keypose, enabling long-horizon prediction with real-time refinement. Furthermore, we leverage the capability of diffusion models and DDIM inversion to propose a Dynamic Temporal Ensembling mechanism, which allows the policy to efficiently respond to dynamic environments and mitigate discontinuities caused by inconsistent multi-modal sampling. SegDiff demonstrates significant performance gains over existing approaches across various simulated and real-world scenarios, indicating its strong ability to reason over extended temporal dependencies while maintaining real-time adaptability and control stability.
Read the full abstract
Robotics
Whole-Body Semantic-to-Actuation Grounding of Elephant-Inspired Soft-Trunk Motion via Lightweight Flow Matching
For close-contact human-robot interaction (HRI), trunk-like continuum manipulators provide a physical channel for diverse whole-body expression, but grounding open-vocabulary responses into such robots is difficult: end-effector motion underspecifies body shape, whereas direct whole-body commands are high-dimensional and hard to keep feasible. We propose a whole-body semantic-to-actuation grounding framework for elephant-inspired soft-trunk HRI based on lightweight flow matching. The framework converts responses from a multimodal large language model into bounded, morphology-aligned intent-intensity tuples, parameterizes tendon-actuation trajectories with compact Catmull-Rom spline controls, and uses a rectified-flow generator to sample feasible whole-body trunk motions. Experiments show that the proposed framework improves held-out grounding correctness from 25.0% to 77.2% over a raw-response dense-regression baseline. Compared with a denoising-diffusion baseline, it improves correctness from 71.9% to 77.2% and reduces inference time from 7.86 ms to 4.87 ms while preserving motion diversity. A 100-participant physical HRI study further shows that adding the generated soft-trunk motion channel increases the positive overall-satisfaction rating from 46% to 82% over the audiovisual-only baseline.
Read the full abstract
Robotics
Affordance-Based Manipulation Planning with Text Goals and Sim-to-Real Generalisation via Real-to-Sim Image Conversion
We present a manipulation planning system based on affordance recognition and action effect prediction. The system reasons through possible futures in visual form, and evaluates candidate plans by agreement of predicted outcomes with text-based goals set at run-time, using a multi-modal goal-matching module. Positions of objects named in the goal text are tracked through predictions even when occluded, making it possible to generate action plans even when objects become occluded, or when their initial descriptors cease to identify them in future states. We further expand the system with an image conversion module for translating real-world state images with objects of varied shapes and visual appearances into a consistent visual appearance, to facilitate manipulation planning in a physical robot setup. We evaluate performance of the system's modules in isolation and demonstrate the integrated system's manipulation planning capabilities on a set of challenging tasks in both simulation and on hardware.
Read the full abstract
Robotics
Wearing A Coat: Dual-Arm Robot-Assisted Dressing with Differentiable Clothing Simulation
The development of assistive robots for dressing tasks serves to augment human convenience and improve the quality of life for individuals with physical impairments. However, due to the intricate contact interactions between garments and the human limbs during dressing, most robot-assisted dressing algorithms treat clothing as an assembly of discrete segments, thereby struggling to manage the partial worn garments under contact constraints. To overcome this challenge, we propose a novel robotic dressing control algorithm that integrates realtime differentiable clothing simulation. The simulation algorithm employs explicit iterative scheme with intentionally introduced higher-order perturbations to enhance computational efficiency while maintaining stability under large time-step conditions. Through simulation, we resolve the garment state under contact constraints, which then enables a multi-phase control strategy for successful coat dressing assistance. To further improve real-time performance, we introduce a constrained local model along with its corresponding optimization solver, permitting high-frequency local compensation for the differentiable simulation based global controller. Finally, we experimentally validate our approach through both simulated and physical dressing scenarios, conclusively demonstrating its feasibility and efficacy
Read the full abstract
Robotics
Think When It Matters: Conditional VLM Reasoning for Social Navigation with RL Policies
As mobile robots become more integrated into everyday human environments, social robot navigation is becoming essential for ensuring human comfort, safety, and trust. While reinforcement learning (RL) navigation policies provide the fast inference and reactive behavior necessary for real-time deployment, they still lack flexible semantic reasoning capabilities and often fail to generalize to complex social scenarios. Recent approaches have increasingly turned to vision-language models (VLMs) in place of RL policies to improve semantic and social reasoning in robot navigation. Nevertheless, their high computational cost and slow inference remain major barriers to real-time deployment. To overcome these limitations, we introduce HUMA (Hybrid Understanding for Multi-modal social Navigation), a hybrid architecture that dynamically balances the computational efficiency of RL policies with the deep semantic understanding of VLMs. Our approach uses a reactive RL policy to handle low-density, routine navigation tasks, while conditioning it on a post-trained high-level VLM when a human enters sensitive situations, such as the robot's proximity zone. We evaluate HUMA on the Social-MP3D and Social-HM3D benchmarks, where it achieves task success improvements of 20% and 3%, respectively, while significantly reducing personal space violations and human collisions against state-of-the-art baselines. Extensive ablation studies validate each architectural component, and real-world deployment on the Mirokaï mobile robot further demonstrates the practical viability of our approach.
Read the full abstract
Robotics
Real-Time Rulebook-Aware Nonlinear MPC for Autonomous Driving with Priority-Biased Tiered Slacks
Autonomous-vehicle motion planners must resolve conflicts among safety, regulation, comfort, and efficiency in real time while exposing those decisions for audit. We present W-SQP, a weighted tiered-slack nonlinear model predictive controller (NMPC) that compiles nine driving-rule families into a four-tier shared-slack nonlinear program solved online with CasADi and IPOPT; the name denotes the weighted quadratic slack penalty, not a sequential-quadratic-programming solver. Strongly separated tier penalties bias residual violations toward lower-priority rules while leaving actuation bounds hard. The controller replans from its executed state at $10$\,Hz and records per-rule residuals on every cycle. A $90$\,ms solver-time limit returns an anytime iterate that is projected through the vehicle dynamics before execution; median and maximum observed wall-clock solve times were $28$ and $104$\,ms. We evaluate W-SQP in closed loop on 150 Waymo Open Motion Dataset scenarios in Waymax against reactive and proposal-and-select baselines, and introduce a log-independent protocol that separates safety and regulatory compliance from resemblance to the recorded human trajectory. Under this protocol, W-SQP shows no systematic group-level deficit relative to expert replay on the log-independent safety and regulatory rules, with several localized regressions in the hardest, highest-divergence scenarios. The results characterize W-SQP as an auditable, priority-biased, anytime-capable NMPC prototype rather than a hard-real-time or formally safe controller.
Read the full abstract
Sunday 12 July
Robotics
HRO: Hierarchical Room-to-Object Framework for Zero-Shot Object Goal Navigation with Large Language Models
Zero-shot object-goal navigation aims to enable an intelligent agent to explore and navigate to objects of unknown categories in an unfamiliar environment without specific target training. In zero-shot navigation tasks, pre-trained large models are usually employed to leverage their prior knowledge for guiding the agent's navigation. However, existing zero-shot object-goal navigation methods based on large language models (LLMs) merely utilize LLMs as flat reasoning tools to directly associate objects or regions. They lack the hierarchical spatial cognition modeling of human-like room semantics to object localization, which leads to strong blindness in exploration, insufficient accuracy in semantic association, and failure to fully unleash the common-sense reasoning potential of LLMs. This paper proposes an LLM-driven hierarchical room-to-object (HRO) framework for zero-shot object-goal navigation, which guides the agent to explore and navigate to the target object in a coarse-to-fine manner. Experiments on Gibson and HM3D datasets verify that our HRO framework achieves superior success rate and generalization over existing LLM-based methods, underscoring LLMs' strong potential for zero-shot object-goal navigation.
Read the full abstract
Robotics
Mapping Pamir: Multi-Session Visual-Inertial SLAM and 3D Reconstruction of an Underwater Shipwreck
This paper presents a framework for multi-session mapping of underwater environments utilizing an affordable action camera. The Visual-Inertial data are augmented by water depth recordings from a dive computer. SVIn2, an open-source VI-SLAM framework, is utilized to generate a trajectory and a sparse reconstruction for each session. Utilizing the keyframes extracted from SVIn2 and the estimated camera poses, a Structure-from-Motion (SfM) framework, COLMAP, is employed for global optimization and to produce a dense reconstruction of the target environment. The presence of calibration targets at fixed locations, when available, is used to estimate the coordinate transformation between different data collection sessions, thus transforming the different sessions into the same coordinate frame. The proposed pipeline is employed for the mapping of a shipwreck off the coast of Barbados. For the first time, both the exterior and the accessible interior parts of the wreck were mapped in two sessions, while a third session employed two cameras with different fields of view.
Read the full abstract
Robotics
A Single Diffusion-Policy Controller for Multi-Task Block Pushing with Zero-Shot Sim-to-Real Transfer
Diffusion policies have shown promising empirical performance in representing and learning complex maneuvers for robots using behavior cloning (BC). In this paper, we explore training diffusion policies from scratch using reinforcement learning (RL) for multi-task robotic manipulation. Specifically, we aim to train a single diffusion policy for block-pushing tasks with multiple shapes. The proposed framework features a simple policy loss function, which is a reweighted evidence lower bound used in BC-based diffusion policy training and can seamlessly serve as the policy learning module in RL algorithms. To address the exploration challenges arising from the absence of demonstrations, we incorporate reverse curriculum generation and objective-centric representations. Combined with the expressiveness of diffusion policies, our design supports learning of multi-task block-pushing policies in our sparse-reward simulation setting. We further evaluate whether the trained diffusion policy transfers in zero-shot to real-world tasks under varying environmental conditions including goal positions, block shapes, block weights and surface friction, providing evidence that this pipeline can transfer to our real-world block-pushing setup under the tested variations.
Read the full abstract
Robotics
3D Scene Graph Prediction: Generating Hierarchical Models from Partially Observed Environments
Generating realistic 3D indoor scenes is an area of growing interest in computer vision and robotics. Existing methods, often motivated by applications such as interior design, generally focus on object layout generation within a single room. The generation of high-level scene structure, such as room-level layout and traversability, remains underexplored despite its importance for robotics applications. In this paper, we consider the case where a robot has explored part of an environment and needs to predict the unexplored parts to support downstream tasks such as exploration or object search. We propose a top-down framework for synthesizing hierarchical 3D scene graphs, including a room layer – describing the floor plan and traversability – and an object layer modeling object layouts within each room. For the room layer, we propose a novel mixed-domain graph diffusion model jointly predicting room categories, floor boundaries, and traversability between rooms. Via corruption and masking, this model supports partial constraints such as incomplete floor plans, avoiding the need for partially observed training data. For the object layer, we integrate an existing mixed discrete-continuous diffusion model for joint prediction of object categories, locations, sizes, and orientations within each room given the floor plan. We compare our method with state-of-the-art occupancy-based and LLM-based floor plan generation methods on a standard benchmark. Compared with an occupancy-based learning baseline, our method generalizes substantially better to out-of-distribution partial floor plans. We also demonstrate our integrated prediction pipeline on real-world scenes from robot-collected data, enabling prediction beyond explored areas.
Read the full abstract
Robotics · Cross-listed from cs.CV
X-GuideAR: An Augmented Reality Framework to Mitigate Radiation Exposure during Fluoroscopic Guidance
Achieving optimal screw placement for orthopedic surgeries requires frequent alignment checks and multiple anatomical views under X-ray – a process known as "fluoro-hunting" that increases radiation exposure to patients and surgical teams. This work introduces X-GuideAR, an augmented reality (AR) framework for identifying optimal X-ray views, aimed at reducing radiation exposure while ensuring accurate screw placement. To exemplify the benefits of X-GuideAR, we focus on S2 alar-iliac (S2AI) screw placement. Our system provides radiation-free guidance for view acquisition and drilling by generating synthetic X-ray previews that accelerate fluoro-hunting. Once the required anatomical views are identified using these previews, a real X-ray is acquired, and the preview of the drilling trajectory is augmented onto it, facilitating precise screw placement with minimal additional radiation. A preliminary study involving eight S2AI trajectories performed by an expert spine surgeon demonstrated a 62.3% reduction in the number of X-rays. Post-procedure evaluations showed that trajectories done with X-GuideAR supported an average safe screw diameter of 12.95 mm compared to 5.9 mm under the conventional workflow, suggesting improved bony containment and potential biomechanical benefit. X-GuideAR shows great potential to reduce radiation exposure and streamline S2AI screw placement, offering a promising direction toward safer and more efficient surgeries.
Read the full abstract
Robotics
D-SafeMPC: Diffusion-Driven Safe Model Predictive Control with Discrete-Time Control Barrier Functions
A key limitation on the use of diffusion models in robotic planning is their inability to inherently enforce safety or dynamical constraints, which often results in physically infeasible or unsafe outputs. Hybrid approaches that employ model predictive control (MPC) to address this problem can be unstable, as poor trajectory initializations from the diffusion model prevent the MPC from converging to a safe and feasible solution. To overcome these challenges, we propose D-SafeMPC, which enhances the interaction between diffusion and control. Our method guides the reverse diffusion process with control barrier functions (CBFs) and control Lyapunov functions (CLFs) and employs an iterative-projection scheme where an MPC refines the trajectory at each denoising step. This steers sampling toward safe, goal-directed regions and provides reliable MPC warm starts. In simulations on a Franka manipulator across four scenarios (one static-obstacle and three dynamic-obstacle settings) and in a sim-to-real experiment on a physical Franka robot, D-SafeMPC improves safety, task success rates, and planning efficiency over state-of-the-art baselines. To facilitate reproducibility, our source code and experimental configurations are available in a repository at https://github.com/erdiphd/D-SafeMPC
Read the full abstract
Robotics
Learning Roller-Skating Motions of Humanoid Robots Based on Adversarial Motion Priors
Humanoid roller-skating is difficult because the robot must coordinate whole-body balance, rolling contacts, and velocity-dependent posture regulation. This paper presents an adversarial motion prior based reinforcement learning framework for two humanoid roller-skating gaits: Pump Glide skating and Push Glide skating. The two gait datasets are collected independently through motion capture and retargeted to the humanoid robot separately. The retargeted data are then smoothed and resampled into reference motion states for AMP training. The two gaits are learned by independent AMP training pipelines with separate reference datasets, separate policies, and independent reward architectures. Simulation experiments are designed to evaluate gait quality, velocity tracking, turning, and gait-specific reward ablations.
Read the full abstract
Robotics · Cross-listed from cs.CV
Is Energy Guidance All You Need? Training-Free Norm Injection for Driving World Models
Driving world models built on large video-diffusion backbones generate realistic scenes but are hard to control: enforcing a traffic norm typically means retraining the backbone or conditioning it on hand-built layouts. We ask whether controllability requires training at all. Our experiment shows that a rectified-flow driving world model, which jointly generates future video and a planned ego trajectory, can have its planned trajectory steered entirely at sampling time by differentiable energy functions that encode driving norms, without knowledge-specific retraining of the diffusion backbone. Concretely, we demonstrate that a world model built on Open-Sora 2.0 MM-DiT backbone can be steered to brake at a counterfactual target by injecting energy guidance at sampling time. However, we find that the generated video does not yet follow the steered trajectory through the backbone's joint self-attention and identify the cross-stream coupling as a crucial requirement for end-to-end-controllable rollouts.
Read the full abstract
Robotics · Cross-listed from cs.CV
TOLiD: Bridging the Architecture Gap in Vision Foundation Model to LiDAR Pretraining via Token Lifting for Distillation
Cross-modal distillation from Vision Foundation Models (VFMs) to LiDAR backbones has recently emerged as a self-supervised pretraining strategy that reduces reliance on dense point-wise annotation for 3D scene understanding. However, existing distillation pipelines typically treat the VFM as a frozen feature source and train a heterogeneous 3D backbone to match fixed image embeddings, forcing the student to bridge both the modality gap and the cross-architecture gap between dense ViT token representations and sparse 3D encoders. We propose TOLiD, a self-supervised pretraining method for LiDAR representation learning that addresses this gap by coupling a LiDAR backbone with a student Vision Transformer (ViT) initialized from a frozen VFM teacher and applying supervision over compatible patch-token representations. TOLiD converts the set of point features within each image patch frustum into a token using Frustum Pooling followed by Frustum Attention, and performs token-level distillation with visibility masking. For LiDAR-only deployment, we lift token features back to per-point representations using masked bilinear sampling to avoid patches that have limited LiDAR points. We extensively evaluate TOLiD on five heterogeneous LiDAR datasets and four cross-sensor adaptation pairs, demonstrating improved transfer with frozen backbones and lightweight heads.
Read the full abstract
Robotics · Cross-listed from cs.CV
Traj-VLN: Learning Pixel-Space Interaction via Autoregressive Trajectory Generation
Benefiting from the powerful priors embedded in large-scale pre-training data and the emerging commonsense reasoning ability, large language models (LLMs) have shown unprecedented generalization capabilities in many research fields. Recently, projecting visual embeddings into the language space via vision-language models (VLMs) to achieve sim-toreal and cross-scene generalization has become a prevailing paradigm in the field of Vision-and-Language Navigation in Continuous Environments (VLN-CE). VLN requires an embodied agent to navigate through unseen environments following natural linguistic instructions. We emphasize that a VLN task can be decomposed into a sequence of sub-tasks, each corresponding to a process of 3D spatial interaction with the environments described by instructions such as "walk to the end of the sofa and turn left." However, such spatial interactions involving moving into the image along the direction of depth sensing are puzzling for VLMs as they were predominantly trained on conversations with RGB images. Rather than incorporating depth or 3D geometric information-which VLMs rarely encounter during pretrainingwe propose an alternative approach: fine-tuning VLMs to learn navigation interactions directly in 2D pixel space through autoregressive trajectory generation. Given a linguistic instruction and historical observations, our model sequentially predicts a series of pixel coordinates, drawing a trajectory from the bottom center of the current observation. While prior work has proved that pixel-goal supervision outperforms learning of discrete actions, our experiments further verify that the supervision of pixel-space trajectory significantly enhances VLN performance. Moreover, we demonstrate that our flagship model achieves state-of-the-art level performance with relatively limited computational resources and training data.
Read the full abstract
Robotics
Action Map Policy: Learning 3D Closed-loop Manipulation via Pixel Classification
The action space poses a major challenge in robot learning, since it is often high-dimensional, can span long time horizons, and frequently admits multi-modal optimal solutions. A good choice of action representation and loss function can help to address these concerns, but there are often trade offs. We propose Action Map Policy (AMP), which casts 3D closed-loop manipulation policy learning as a classification problem in image space. While classification has been an effective formulation in generative language models, applying it to robot action learning is difficult because naively discretizing high-dimensional continuous actions explodes the token vocabulary. Our key idea is to project 3D actions onto the camera image planes and treat each pixel location as a discrete class, thus controlling dimensionality while retaining multi-modality. This method supports millimeter-level precision for high-dimensional actions without requiring a prohibitively large vocabulary, while preserving fine-grained pixel-wise visual signals. Furthermore, it can predict the entire action chunk in a single forward pass, avoiding complex noise scheduling and iterative denoising while achieving substantially faster inference than diffusion policies. Experiments on various manipulation tasks show that AMP outperforms strong baselines, achieving higher success rates, faster inference, and enhanced spatial reasoning.
Read the full abstract
Robotics
SensorPerch: Sense Wherever and Whenever it Matters
Existing robotic perception is constrained by sensors that are either robot-mounted or permanently fixed in the environment, locking perception to a limited set of viewpoints. Yet as robots perform increasingly diverse tasks, the most informative viewpoint shifts from one task to the next-often somewhere onboard sensor and static infrastructure can not readily satisfy. To address this gap, we propose SensorPerch, a novel realization of active perception that decouples sensing from both the robot embodiment and the environment by treating sensors as independent physical entities that the robot can autonomously detach and re-attach within the environment. SensorPerch presents one realization of this paradigm: a lightweight, wireless, reconfigurable sensor platform that can perch on diverse surfaces, paired with a viewpoint-selection framework that determines task-optimal sensor placements. Together, these enable robots to construct task-relevant viewpoints on demand, independent of the robot's current position and available fixed infrastructure. We demonstrate the paradigm on two task classes: (i) object-coupled perception, where SensorPerch enables persistent object-state detection beyond the robot's current position, achieving successful event detection even when the robot is not nearby; and (ii) policy-coupled perception, where SensorPerch allows robots to construct diverse, policy-specific viewpoints for various policies, achieving success rates comparable to those obtained using oracle viewpoints.
Read the full abstract
Robotics
Artificial Foveated Perception for Mitigating Shortcut Learning in Robotic Foundation Models
Robotic foundation models still need task-specific fine-tuning before deployment, and the fine-tuned policies often break under modest changes in scene layout, lighting, or nearby distractors. We trace this brittleness to shortcut learning: fine-tuning supervises actions but not the visual evidence the policy uses, so the policy can settle on scene-level correlations that predict the demonstrations without causing success. We propose Artificial Foveated Perception (AFP), a lightweight, policy-agnostic module that takes the same vision and language inputs as existing Vision-Language-Action and World Action Model pipelines and predicts task-conditioned masks over the relevant objects, the robot, and other action-critical regions. During fine-tuning the masks serve as an auxiliary grounding signal that aligns the policy's visual attention with task-relevant regions; the policy architecture is unchanged, and at inference the policy runs on the original observation stream with no AFP call in the control loop. In simulation with four robotic foundation models and on a real robot with $\pi_{0.5}$, AFP improves generalization under environmental perturbations, reduces overfitting, and shortens fine-tuning. Ablations over mask quality and grounding-loss design show that these gains come from directing policy learning toward task-relevant visual evidence. Code, data, and videos are available at https://apollo-lab-yale.github.io/26-CoRL-AFP-website/.
Read the full abstract
Robotics
Coverage Path Planning: Classical Foundations, Recent Advances, and Future Directions
Coverage path planning (CPP) is a fundamental problem in robot motion planning, whose aim is to produce robot trajectories that provide complete coverage of target workspaces while minimizing task-specific objectives such as path length, overlap, number of turns, and energy consumption. CPP has widespread applications in cleaning, inspection, mapping, agriculture, manufacturing, surveillance, demining, and environmental monitoring. Although classical CPP has been extensively studied, recent advances have extended CPP beyond single-robot settings to multi-robot systems, complex 3D environments, constrained platforms, learning-based coverage planning, and visual coverage tasks. This paper presents a comprehensive survey of 125 representative works published primarily between 2015 and 2026, while presenting the evolution of recent developments in light of the classical CPP methods published before 2015. The CPP methods are organized into six main categories: single-robot CPP, multi-robot CPP, 3D CPP, constrained CPP, learning-based CPP, and visual CPP. For each category, the review summarizes the main planning formulations, representative algorithms, strengths, and limitations. In addition, the review analyzes how environmental knowledge, workspace geometry, robot constraints, sensing objectives, and coordination requirements shape the CPP problem. The survey further discusses open challenges in scalable online planning, multi-robot coordination, 3D and visual coverage, unified platform-constrained and resource-aware coverage, and learning-enhanced coverage. Thus, the survey provides a structured overview of recent CPP developments and future research directions.
Read the full abstract
Robotics
World Models as Adversaries: Multi-Agent Self-Play Fine-Tuning for Robust Motion Planning
Robust motion planning in dense traffic requires autonomous vehicles to interact in rare and safety-critical scenarios that are underrepresented in naturalistic driving data. Although adversarial training offers a feasible solution, existing methods often rely on external scenario generators, heuristic perturbations, or simulator-heavy rollouts, which makes them difficult to integrate with modern autoregressive planners. Here, we cast adversarially robust planner learning as a constrained min-max game and propose Adversarial World Modeling (AWM), a theoretically grounded multi-agent self-play fine-tuning framework. Since solving the exact game is intractable, AWM introduces a principled decoupled solver. In the inner minimization, the planner's predictive world model is converted into a role-conditioned adversary that learns sparse, scene-adaptive attack coalitions via counterfactual credit assignment. In the outer maximization, the ego planner optimizes a regret-aware robust best response against the frozen AWM, utilizing tail-risk weighting and reference-anchored trust regions to improve hard-case recovery while preserving nominal driving behavior. Experiments on the nuPlan and InterPlan benchmarks demonstrate that our method generates transferable adversarial interactions and yields a robust planner that achieves competitive closed-loop performance in both nominal and highly interactive long-tail scenarios. Theoretical analysis justifies the decoupled solver and the main optimization components.