Papers

Existing embodied control research demonstrates remarkable performance improvements by scaling training data and model size. We instead explore inference-time strategy as an alternative axis. Non-deterministic generative models, such as diffusion and autoregressive models, have been widely adopted in the field of embodied control. However, the single-shot inference paradigm limits their performance. In this paper, we propose TapSampling, a plug-and-play framework for inference-time sampling. First, we introduce an Action-VAE that represents actions in a low-dimensional latent space by mapping policy-generated initial actions into a compressed posterior distribution, from which any number of latent samples can be drawn and decoded into candidate actions that approximate the true action distribution. Second, we formulate action verification as task-progress outcome prediction, using the intrinsic sequential structure of robotic datasets to train a semantically grounded verifier for interpretable action selection. Furthermore, TapSampling is a policy-agnostic framework. Extensive experiments in both simulated and real-world environments demonstrate that our method substantially improves multiple generalist policies without further policy finetuning. Code and models are available at the project page.

Safety-critical control is essential for humanoid robots operating in complex human-centered environments, where physical safety constraints such as joint limits, self-collision avoidance, obstacle avoidance, and workspace boundaries must be satisfied during real-robot operation. However, existing approaches remain limited because kinematic safety guarantees can be degraded in the presence of unknown disturbances, such as model uncertainties, trajectory-tracking errors, and external perturbations. This paper presents a hierarchical safety-critical whole-body control framework for humanoid robots based on input-to-state safe control barrier functions (ISSf-CBFs). The proposed architecture integrates a kinematic-level whole-body controller (KinWBC), an ISSf-CBF safety filter, and a dynamic-level whole-body controller (DynWBC). KinWBC generates nominal joint-motion references from prioritized tasks; the ISSf-CBF filter minimally modifies these references to satisfy kinematic safety constraints under bounded disturbances; and DynWBC tracks the filtered references while enforcing full-body dynamic feasibility and contact stability. Safety constraints are imposed on a whole-body kinematic model, and the ISSf-CBF parameters are conservatively tuned so that the resulting kinematic safety guarantees can be transferred to full-order humanoid dynamics under unknown disturbances. Simulation and real-robot experiments demonstrate that the proposed framework improves safety margins under model mismatch and reliably enforces multiple safety constraints in real time during locomotion, teleoperation, and single-leg balancing with hand control. Project website: https://kwlee365.github.io/SafeWBC-Website/

Real-time chunking (RTC) lets chunked action policies operate under inference delay by conditioning a newly generated action chunk on actions already committed by the previous chunk. Training-time RTC simulates this delay during learning and avoids expensive guidance at deployment, but its binary prefix mask treats all non-prefix tokens as fully unconstrained. This under-models asynchronous execution: early overlap actions are fixed, while later overlap actions remain editable but should still stay close to the previous plan. We propose Soft RTC, a training-time RTC generalization based on action-prior denoising. Soft RTC constructs corrupted overlap tokens from partially denoised states instead of pure noise and injects the aligned previous chunk as the same prior during inference through a lightweight token-wise blending rule. On the 12 released large Kinetix levels, a short soft window nearly matches hard training-time RTC in overall solve rate (0.809 vs. 0.815), while a medium window reduces high-delay action delta and jerk by 9.1% and 9.6% relative to hard RTC. Both variants keep near-naive runtime, unlike inference-time RTC baselines. A small preliminary real-robot sorting study provides additional evidence that training-time RTC can improve completion and that Soft RTC gives the lowest commanded-action finite-difference metrics among the tested policies.

Robotic perception in unstructured environments remains challenging despite the zero-shot capabilities of foundation models such as SAM. This work attributes performance degradation to non-uniform representation shifts across transformer layers: shallow layers exhibit substantial domain gaps (CKA < 0.5), whereas deep layers transfer effectively (CKA > 0.7). Based on this observation, we propose RepSAM, a representation-guided parameter-efficient fine-tuning (PEFT) framework for adapting foundation models to robotic vision. RepSAM employs a theoretically grounded CKA-guided rank allocation strategy combined with a multi-modal fusion module for robust handling of challenging robotic scenarios, including transparent objects and cluttered scenes. Experimental evaluation across six benchmarks and robotic manipulation tasks demonstrates that RepSAM achieves 97.9% of full fine-tuning performance (89.0% vs. 90.9% mIoU) while reducing trainable parameters by 158x (from 632M to 4.0M). RepSAM outperforms DoRA by 7.9% mIoU with just 4 hours of training on a single A100 GPU (a 96x reduction from full fine-tuning, which takes 384 GPU-hours). These improvements are statistically significant (p < 0.01) and translate to a 12.0% absolute improvement in robotic manipulation success rates over the LoRA (RGB) baseline.

The ability to efficiently and reliably learn new tasks has been a foundational challenge in robotics. Vision-Language-Action (VLA) models have demonstrated strong generalization across diverse manipulation tasks, yet pretrained policies consistently fall short of the reliability required for real-world deployment. Reinforcement learning (RL) fine-tuning offers a promising path to bridge this gap, but existing approaches either train from scratch without fully leveraging pretrained priors, or fine-tune VLAs without achieving the sample efficiency and success rates that practical deployment demands. We present EXPO-FT, a system for stable, sample-efficient RL finetuning of pretrained VLA policies that closes this gap. Our system solves a suite of challenging manipulation tasks, including routing string lights and inserting the plug to light it up, striking a pool ball into a pocket, and inserting a flower into a wine bottle, each requiring combinations of high precision, dynamic actions, and robustness to varied initial states. Our system achieves perfect task performance (30/30 successes) across all evaluated tasks within an average of 19.1 minutes of online robot data, outperforming both prior RL-from-scratch and VLA finetuning approaches. We release an open-source codebase with the aim of facilitating broader adoption of RL finetuning of VLA models in robotics.

Autonomous exploration is critical for robot mapping unknown environments. Desirable characteristics of exploration algorithms include compute efficiency and small traversed distance during the exploration process. Motivated by these, we present Omnidirectional Path-efficient Aerial 3D expLoration (OPAL), an exploration framework centered on deliberate 360-degree yaw rotation at ambiguous branch points rather than compute-heavy global tour planning. We devise multiple variants of OPAL to determine the frontier-selection strategy once the yaw pan is completed. One variant is model-free, while others use large language models (LLMs) or vision-language models (VLMs). We characterize the performance of these variants while varying the vicinity search radius to include frontiers in the selection process. Through simulations we find that although the time-consuming in-place yaw rotation increases total exploration time relative to more computationally complex baselines such as EDEN and FALCON, OPAL is computationally simpler and achieves shorter travel distances and higher coverage-versus-distance area under the curve. We also show that adjusting the frontier-selection search radius enables a tradeoff between travel distance and total exploration time. We verify our results on a Modal AI drone in two indoor environments by comparing OPAL against FALCON, and find that the traveled distance for a variant of OPAL to be as much as 25% lower than FALCON.

Distribution shift in imitation learning refers to the problem that the agent cannot plan proper actions for a state that has not been visited during the training. This problem can be largely attributed to the inherently narrow state-action coverage provided by expert demonstrations over the full environment. In this paper, we propose a robust offline to adaptive online imitation learning framework that handles the distribution shift problem in a lifelong, multi-phase scheme. In the offline learning phase, we leverage supplementary demonstrations to broaden the state-action coverage of the policy by utilizing a discriminator to effectively train the policy with supplementary demonstrations, thereby enhancing the robustness of the policy to distribution shift. In the subsequent online inference phase, our framework detects the occurrence of distribution shift and conducts self-supervised imitation learning from online experiences to adapt the policy to the online environments. Through extensive evaluations in MuJoCo environments, we demonstrate that our method exhibits better robustness to distribution shift and better adaptation performance to online environments than the baseline algorithms, which indicates superior performance of our framework against the distribution shift.

Biomimetic autonomous underwater vehicle (BAUV) with multi-link mechanism is widely used in aquatic life observation and environmental surveys due to its low power consumption and high maneuverability. An environmental survey requires a path following system that automatically follows specific points. However, the path following system of BAUV is limited, and its evaluation with multi-link mechanism robots has not yet been clarified. The path following system in BAUV requires prior simulation because the model differs depending on the type of biomimetics. In this study, we propose a path following system for BAUVs with a multi-link mechanism and evaluation in underwater simulation. In this result, it was possible to design a path following system suitable for BAUV, determine parameters using a simulator, and evaluate control methods.

Large Language Models (LLMs) and Multimodal LLMs (MLLMs) have demonstrated immense potential in autonomous driving (AD) by offering human-like reasoning and open-world generalization. However, the excessive computational overhead and high inference latency of these massive models severely hinder their deployment in resource-constrained AD systems. To address this challenge, we propose a novel decision-making framework utilizing a lightweight confidence-aware language model, which bridges the gap between complex multimodal intention reasoning and efficient inference. Specifically, we design a multi-agent collaborative workflow, comprising action voting, confidence assessment, and summarization agents, to generate high-quality, confidence-annotated decision demonstrations via explicit Chain-of-Thought (CoT) reasoning. These demonstrations are then distilled into a lightweight language model featuring a dual-head architecture, enabling the joint prediction of decision probabilities and the generation of textual rationales. The distillation is realized via a confidence-aware fine-tuning strategy coupled with Retrieval Augmented Generation (RAG) to enhance the model's adaptability and data efficiency. Comprehensive closed-loop experiments on the nuPlan benchmark demonstrate that our approach achieves state-of-the-art (SOTA) success rates in both regular and long-tail scenarios while maintaining low inference latency.

We present the first approach to build hierarchical task-driven 3D scene graphs of arbitrary indoor or outdoor environments using an uncalibrated monocular camera in real-time. We leverage geometric foundation models to estimate geometric attributes of the scene graph (e.g., object bounding boxes), but we also observe that traversability information (the "places" layer of a scene graph) can be directly reconstructed by adding an extra head to existing geometric foundation models, like VGGT. Our approach is task-driven in the sense that we adjust the granularity of the objects and regions in the map depending on the task; for instance, during a manipulation task, our approach is able to resolve small knobs on a stove, while during a navigation task it can focus on large objects (e.g., the entire stove). However, in a major departure from related work, we consider the realistic case where the list of tasks is not predefined and fixed, but evolves as the robot operates. This naturally allows dealing with complex loco-manipulation tasks, where the robot can dynamically adjust its representation as the task unfolds. We dub the resulting approach FOUND-IT. FOUND-IT also includes an agentic approach to query information in the scene graph. In addition to achieving 79% higher accuracy on the ASHiTA SG3D task grounding benchmark, we demonstrate FOUND-IT runs in real-time on a ground robot using a Jetson Thor. Furthermore, to highlight the robustness of our method, we demonstrate constructing 3D scene graphs on casually captured realtor apartment tours from YouTube. Code will be made available upon publication.

The strong dynamic coupling between the manipulator and the base poses a significant challenge to maintaining spacecraft attitude stability, potentially compromising mission safety. In this paper, we propose a Dual-Agent Coordinated Manipulation Planning (DACMP) framework that simultaneously achieves high-precision end-effector pose reaching for a 6-DoF space manipulator and attitude stabilization of the base spacecraft. To enhance learning efficiency, we present a prior policy-guided Deep Reinforcement Learning algorithm incorporating the Timestep-level Expert Switching Guidance (TESG) mechanism, thereby promoting global convergence and improving task success rates. Extensive experiments demonstrate that DACMP significantly outperforms baseline DRL algorithms in terms of task success rate and control precision. Furthermore, the robustness of DACMP is validated under various challenging scenarios, including system constraints, environmental disturbances, and perception uncertainties. The code and simulation configurations are available on GitHub: https://github.com/HIT-YuhuiHu/DACMP.

Neural network (NN) dynamics models and control policies achieve strong performance in robotics, but providing sound guarantees under uncertainty remains difficult, especially for closed-loop NN systems. Existing reachability tools provide formal over-approximations, yet are often non-differentiable, overly conservative, or too slow for modern learning and online planning pipelines. To address this, we present a parallelizable, differentiable reachability framework in JAX for continuous- and discrete-time systems with analytical and NN-based dynamics and controllers. Our framework combines Taylor-model flowpipe construction with CROWN-style linear bound propagation through a unified representation that preserves affine dependencies while supporting GPU-batched computation and automatic differentiation. Building on this reachability primitive, we develop (i) a certified training method that encourages reachability-friendly dynamics models and controllers, and (ii) a reachability-aware sampling-based MPC scheme with gradient-based refinement. Experiments on non-prehensile manipulation and quadrotor tasks, including hardware and higher-dimensional evaluations (up to 72D), demonstrate practical online planning while maintaining certified reachable-set over-approximations under bounded uncertainty.

World models for partially observed environments must imagine multiple compatible hidden futures and steer between them under counterfactual actions. Joint Embedding Predictive Architectures (JEPAs) do this in latent space, but a vector-valued latent has no internal structure for carrying the belief over hidden continuations through blind rollout. We introduce the Unitary World Model JEPA (UWM-JEPA), a JEPA world model with a density-matrix latent on a joint system-environment space and a learned unitary predictor. The construction preserves the joint-state spectrum exactly during rollout, so the predictor itself cannot dissipate the represented uncertainty. On a hidden-velocity indicator task requiring five-step forward simulation under a given action sequence with the target observation masked, UWM-JEPA reaches 0.77 accuracy and degrades monotonically as actions are perturbed; a parameter-matched LSTM-JEPA trained under the same counterfactual-target objective and action head collapses to majority-class accuracy (0.53) under every action condition. Under blind rollout, UWM-JEPA loses fewer than ten points of probe R^2 at short horizons while vector-latent baselines lose forty-one and sixty-eight; both nevertheless tie on a held-out context probe, locating the separation in the predictor rather than the encoder. Action sensitivity itself requires training against counterfactual rather than teacher-forced targets, a finding that applies beyond the unitary parameterisation. For JEPA world models to imagine under partial observability, latent geometry and predictor dynamics matter, not frozen context-encoding capacity alone.

Guided Soft Actor-Critic (GSAC) distills knowledge from a privileged full-state teacher to a partial-observation student for autonomous driving, but uses a fixed distillation coefficient lambda regardless of the agent's uncertainty. We present Belief-Aware GSAC (BA-GSAC), which modulates lambda via ensemble disagreement, and use it as a testbed for a systematic empirical study asking: when does adaptive guidance actually help? Evaluating five strategies (fixed lambda in {0.01, 0.1}, adaptive, linear decay, and vanilla SAC) across three POMDP difficulty levels on Highway-Env, we find that preliminary single-seed runs suggest benefits under mild and moderate partial observability, but under severe occlusion (evaluated with 3 seeds for all methods) the adaptive coefficient collapses to lambda_min within about 3K steps. We trace this to an observability blindness phenomenon: because the ensemble predicts partial observations, it achieves low disagreement even under heavy occlusion, modeling what is visible but unable to detect what is missing. We diagnose the root cause and propose an architectural fix (training the ensemble on full-state predictions using the guiding actor's privileged access); while not validated here, we show that even with current limitations, the warmup phase provides measurable stabilization (CV=13.3% vs. 29.8% for constant lambda=0.01). In fact, a simple deterministic linear decay schedule achieves the best severe-POMDP performance across all metrics (mean 116.5, CV=8.9%), suggesting that the scheduling effect, not the ensemble, drives the stability benefit. These findings provide practical guidance for designing uncertainty-aware teacher-student frameworks and highlight ensemble prediction targets as an important design choice.

Autonomous driving perception demands accurate and efficient processing of three-dimensional sensor data under strict power constraints. Traditional convolutional neural networks achieve strong detection accuracy but are computationally intensive, limiting their suitability for deployment on resource-constrained neuromorphic platforms. Spiking neural networks offer a compelling alternative through event-driven sparse computation, yet their application to complex real-world perception tasks such as three-dimensional object detection remains limited. In this work, we propose an end-to-end spiking encoder-decoder network for object detection in bird's eye view representations of LiDAR point clouds, trained using surrogate gradient backpropagation. We train two variants: a membrane potential variant that reads continuous neuron state at the output stage for maximum accuracy, achieving $92.05$/$87.04$/$86.51$ AP at $\mathrm{IoU}\!=\!0.5$ (Easy/Moderate/Hard), and, a fully binary spiking variant that operates exclusively on spike trains at every layer for direct neuromorphic deployment. We evaluate four input spike encoding strategies and demonstrate that allowing the network to learn spike representations directly from data outperforms hand-crafted Poisson, latency, and z-axis encoding schemes on the KITTI benchmark, where sequential frames are unavailable and the BEV input is presented repeatedly across timesteps as a proxy for temporal streaming. A block-wise energy analysis demonstrates a $3.33\times$ reduction in synaptic operation energy over an equivalent CNN under conservative loop-based operation. Together, these results demonstrate the viability of spiking neural networks for accurate and energy-efficient neuromorphic perception in autonomous driving.

Greenhouse agriculture in the Mediterranean region faces significant automation challenges due to its unique structural and environmental constraints. These environments are characterized by extremely narrow aisles, heterogeneous terrains ranging from concrete to tilled soil and severe optical interference caused by polyethylene covers, which induce specular reflections and "ghost points" in depth sensors. While autonomous navigation is essential for digitizing agricultural tasks, traditional solutions often rely on expensive 3D LiDAR systems that are economically unscalable for most facilities. To address this, this paper presents GreenSeg, a robust perception framework for autonomous navigation using RGB-D sensing. The proposed method introduces a dual-layer validation strategy: a robust global plane fitting combined with a surface curvature filter for terrain adaptability, and a seed-point-based Region Growing constraint to ensure the spatial continuity of the navigable plane. Experimental validation was conducted using the AGRICOBIOT I platform across four diurnal scenarios with varying solar elevations. The results show that GreenSeg consistently outperforms benchmark segmentation methods, achieving peak improvements of 11.58% in mean Recall and 19.24% in mIoU during critical rotational maneuvers at the end of corridors. These findings confirm that the proposed algorithm enables stable and safe autonomous navigation in unstructured, dynamic agricultural environments that are subject to budget constraints and sensitive to lighting conditions.

We present FusionCore, an open-source ROS 2 sensor fusion package that fuses IMU, wheel encoder odometry, GPS, and Visual SLAM pose into a single 100 Hz odometry stream using a 23-state Unscented Kalman Filter (UKF). The 23rd state is an online estimate of the wheel encoder's systematic yaw rate bias, identified through GPS heading cross-covariance and subtracted during GPS blackouts to reduce heading drift in coast mode. FusionCore also estimates gyroscope and accelerometer biases as explicit filter states, handles GPS natively in ECEF without a separate coordinate projection node, applies per-sensor Mahalanobis chi-squared outlier gating calibrated to measurement degrees of freedom, and adapts sensor noise covariance automatically from the innovation sequence. VSLAM pose fusion enables GPS-denied operation with any visual odometry or SLAM system, including automatic recovery from map reinitialization. We evaluate against robot_localization on twelve full-length sequences (55-92 min each) from the NCLT public dataset. FusionCore achieves lower Absolute Trajectory Error (ATE) on ten of twelve sequences, with improvements ranging from 1.2x to 22.2x on winning sequences. The robot_localization UKF diverges numerically on all twelve sequences. FusionCore is available at https://github.com/manankharwar/fusioncore under the Apache 2.0 license.

High-fidelity 3D Gaussian head avatar generation is critical for applications such as AR/VR, telepresence, and digital humans. Existing methods depend on multi-view datasets, 3D captures, or intermediate 2D view synthesis. In contrast, we learn both conditional and unconditional 3D head models from randomly sampled 2D images alone, without using multi-view data, 3D supervision, or intermediate view generation. We introduce MVCHead, a single-shot state space model that enforces multi-view consistency (MVC) directly in the 3D representation while regressing 3D Gaussians under these constraints. At its core, we propose a Hierarchical State Space (HiSS) block that progressively refines Gaussians from coarse to fine, while capturing long-range dependencies. Within each HiSS block, we modify Mamba's standard unidirectional scan with the proposed Hierarchical Bi-directional State Scan (HiBiSS) that aligns recurrence with the axes along which multi-view inconsistencies are strongest. Finally, we design an SE(3) Multi-view Critic that judges whether a set of self-renders arises from a single underlying 3D configuration, rewarding cross-view pixel alignment without observing real multi-view pairs. MVCHead achieves state-of-the-art perceptual quality, surpasses prior methods in both texture and geometric consistency, and maintains comparable shape consistency. To demonstrate scalability, we release FaceGS-10K, the first large-scale dataset of ready-to-use 3D Gaussian head assets for training and evaluation of 3D head models. Project Page and code: https://humansensinglab.github.io/MVCHead/

Recent advances in imitation learning and vision-language models highlight the need for high-fidelity tactile perception, with 6-DoF tactile object pose estimation providing a crucial foundation for precise robotic manipulation. We introduce InvariantCloud, a 6-DoF pose estimation framework that leverages the global invariance of surface marker constellations on vision-based tactile sensors. In contrast to recent approaches, our one-shot globally invariant point cloud registration suppresses cumulative drift and overcomes long-standing limitations in accurately estimating yaw (Z-axis) rotation. Experimental verifications show that InvariantCloud achieves superior yaw tracking accuracy and re-localization repeatability compared to existing benchmarks, demonstrating its precision and robustness in long-sequence manipulation tasks.

Training data for olfaction is scattered through disparate, non-standardized datasets that limit the ability to build representative world models. Olfactory navigation is a highly dynamic and non-stationary task that benefits from real-time continual learning. We introduce an adaptive framework called Grow-Prune-Freeze (GPF) networks that enable an agent to continually learn through growing, pruning, and freezing early layers of its policy in response to world complexity. Grounding GPFs in non-linear random matrix theory, we show that the work of Pennington & Worth (2017) can be extended from single hidden layers to n-layer continual-learning models, and that eigenvalue composition of network weights is preserved as successive layers are added. We show that GPFs based on Expected SARSA achieve a 94% success rate on turbulent plume navigation - a partially observable, non-stationary task representative of the "big world" challenges that motivate adaptive learning in robotics - and provide supporting methodology for applying GPFs in other world models. Further experiments amount evidence that GPFs may generalize well to other machine learning tasks such as reinforcement learning in Atari, image classification, and autoregressive language models. We open source all code and data to encourage improvements on and more research in olfactory robotics.

Soft pneumatic actuators are widely used in soft robotics because they can produce large motions while remaining compliant enough to interact safely with objects, environments, and the human body. However, their performance is not solely determined by pressure. Instead, the response depends on the way the actuator is built, including the shape of its chambers, the placement of reinforcements, the use of folds, material stiffness, and the constraints that guide its deformation. As the literature has expanded, it has become more difficult to determine which mechanism is most suitable for a given application and which reported results can be compared across studies. This review examines soft pneumatic actuators according to the design strategies used to generate four motion classes: linear, bending, twisting, and omnidirectional actuation. For each class, it analyzes the structural features that define the deformation path, including braid angle, fold geometry, fiber orientation, chamber arrangement, structural asymmetry, and internal constraint layers. It then discusses how the design choice affect motion output, force generation, air demand, repeatability, durability, fabrication difficulty, and robotic integration. The review further identifies key conditions that must be considered when selecting or comparing actuators, including pressure, loading condition, actuator size, pneumatic supply, and hysteresis This approach helps explain why actuators with similar motion outputs may differ substantially in design requirements, pneumatic demand, and practical suitability. It also highlights the design priorities needed for compact, efficient, repeatable, and deployable soft pneumatic systems in wearable, biomedical, and mobile robotic applications.

Decentralized multi-robot LiDAR-SLAM is essential for collaborative missions but faces significant challenges in maintaining global consistency. Existing frameworks predominantly rely on local-search optimization or one-time coordinate alignment, which are prone to suboptimal convergence and long-term inconsistency, especially in large-scale or degenerate environments. To address these limitations, this paper presents the first decentralized LiDAR-SLAM system that integrates a state-of-the-art certifiably optimal Pose Graph Optimization (PGO) backend. By leveraging the Riemannian Block Coordinate Descent (RBCD) algorithm, our system ensures globally consistent trajectory estimation without requiring accurate initial guesses. Experimental results demonstrate that the proposed framework achieves superior robustness, improving trajectory RMSE by up to 48.9% compared to the state-of-the-art DiSCo-SLAM.

Learning universal policies from cross-embodied data remains a fundamental challenge in robotics. Although Vision-Language-Action (VLA) models are pre-trained on large and diverse datasets, they typically rely on embodiment-specific fine-tuning to achieve strong performance in downstream tasks. This requirement severely limits their generalization capability and restricts knowledge transfer across embodiments performing similar tasks. To overcome these limitations, we focus on cross-embodied settings with shared robotic bases and heterogeneous end-effectors, and propose X-DiffVLA, a diffusion-based VLA model featuring a unified cross-embodied action head. X-DiffVLA can leverage the generative strengths of diffusion models to capture both the diversity and latent correlations in cross-embodied datasets. Specifically, we introduce Embodiment Forcing, a classifier-free guidance technique to implicitly steer action generation toward embodiment-specific functional components, capturing fine-grained structural nuances without explicit supervision. In addition, a Morphological Tree Diffusion approach is designed to strengthen behavioral correlations across diverse end-effectors, maximizing the transferability of heterogeneous demonstrations. Experimental results across RoboCasa and Isaac Gym, covering different embodiments from grippers to dexterous hands, show that X-DiffVLA achieves state-of-the-art performance, with improvements of 15.3% and 12.5%, respectively. Real-world evaluations further validate the robustness of the proposed framework and its effectiveness in scalable cross-embodied policy learning.

4D radar is increasingly attractive for robotic mapping because it provides range, azimuth, elevation, and Doppler measurements while remaining robust in adverse visibility conditions. Although recent radar and radar–inertial odometry methods have achieved promising online state estimation performance, offline global map refinement for 4D radar remains underexplored. This paper presents RAMBA, a radar bundle-adjustment framework for globally consistent 4D radar mapping. Given initial poses and radar frames from a radar–inertial odometry front-end, RAMBA jointly refines radar frame states using covariance-weighted geometric residuals, IMU preintegration factors, and radar ego-velocity constraints. The geometric residuals extend pairwise GICP to a multi-frame optimization by forming voxel-based correspondences across selected frames and weighting each residual with point covariances. To improve robustness against drift and revisits, RAMBA enforces temporal consistency during correspondence formation while explicitly supporting loop-closure constraints. Experiments on the ColoRadar and SNAIL Radar datasets show that RAMBA improves map consistency and usually enhances trajectory accuracy over radar–inertial odometry and pose-graph optimization baselines.

Autonomous parking demands precise low-speed maneuvering within narrow, cluttered, and highly constrained environments, where vehicles must navigate tight spaces while avoiding static obstacles and complex geometric boundaries. Unlike imitation learning, which typically requires massive volumes of high-quality expert demonstrations to converge to a stable policy and often suffers from limited generalization to unseen scenarios, traditional reinforcement learning (RL) methods face persistent challenges including excessive training overhead, inefficient exploration, and even failure to learn viable parking strategies in challenging settings. To address these limitations, this paper presents a correction-in-the-loop sample-efficient reinforcement learning (CIL-SERL) framework for end-to-end autonomous parking, which is entirely trained in a photorealistic 3D Gaussian Splatting (3DGS) parking simulator that enables high-fidelity digital reconstruction of real-world scenes. Inspired by error-correction notebooks used in learning practice, we design a novel multi-level replay buffer mechanism. These buffers hierarchically organize and store standard RL rollouts, human corrective interventions, failed exploration trajectories, and rollback-based correction segments in separate yet interconnected memory regions, facilitating structured sampling and targeted learning during training. The proposed framework is systematically evaluated in both the 3DGS simulation environment and a physical vehicle platform. Extensive experimental results demonstrate that our method achieves substantial improvements in parking success rate, operational efficiency, and safety performance across diverse scenarios, validating the effectiveness and practical applicability of the proposed CIL-SERL-based end-to-end autonomous parking solution.

Coordinating micro-robotic swarms in realistic, time-dependent fluid environments remains a major challenge for biomedical and environmental applications. We present a hybrid CFD-MO-MARL (Computational Fluid Dynamics-Multi Objective-Multi Agent Reinforcement Learning) framework that couples a high-fidelity incompressible Navier–Stokes solver with decentralized proximal policy optimization to learn swarm control policies in oscillatory flow. Sixteen magnetically actuated micro-robots were simulated to navigate a pulsatile arterial waveform within a 2 mm channel while jointly optimizing upstream progression, energy efficiency, and motion smoothness. Conflicting objectives are resolved using Projected Conflicting Gradient (PCGrad) surgery. Without PCGrad, energy and smoothness rewards collapse during training, demonstrating that gradient conflict resolution is essential for stable multi-objective learning. The converged policy achieves progress rewards of 6.5-7.0, energy efficiency of 0.63-0.65, and smoothness of 0.97-0.99, outperforming brute-force baselines by more than 8 reward units on the primary objective. Training reveals three emergent behaviors not encoded in the reward function: hydrodynamic throttling formations that reduce peak flow velocities, a cycle-synchronized ratchet mechanism that exploits flow reversals for upstream movement, and individualized final-approach strategies near the target boundary. These results demonstrate that physically realistic fluid–agent interactions can be integrated directly into multi-objective reinforcement learning, providing a scalable framework for micro-swarm control in biomedical navigation, environmental monitoring, and microfluidic systems.

Integrating artificial intelligence (AI) into sampling-based motion planning provides new possibilities for improving autonomous navigation efficiency. In this paper, three algorithms, namely RRT*, Neural RRT*, and Neural Informed RRT*, are implemented and evaluated on environments containing convex and concave obstacles with different obstacle densities. The obtained results indicate that neural-guided planners improve path quality, producing up to 14% shorter paths and 55–75% smoother trajectories compared with the conventional RRT* algorithm. Among the evaluated methods, Neural Informed RRT* achieves the best overall performance in terms of path length and trajectory smoothness. These results demonstrate the effectiveness of AI-guided sampling strategies for improving reliability and trajectory efficiency in robotic and UAV navigation, despite a slight increase in computation time. Overall, the study highlights the growing importance of artificial intelligence in real-time robotic path planning applications.

Sampling-based algorithms for robot path planning offer probabilistic completeness and strong empirical convergence properties across environments with diverse obstacle configurations. However, in practice, these methods often require many iterations to obtain high-quality solutions. This paper proposes Convex-Neural RRT*, an enhanced RRT* variant that incorporates neural guidance to predict informative waypoint regions near high-quality paths. Convex candidate regions are extracted from these predictions, enabling the planner to concentrate exploration on geometrically relevant areas while preserving global exploration. The proposed algorithm is evaluated against Neural RRT*, Neural Informed RRT*, classical RRT*, and LTA* across three environment types and 18 benchmark maps. Experimental results show that Convex-Neural RRT* reduces computation time by 30-75% compared to neural-guided variants and up to 88-98% relative to LTA*, while achieving an average path length reduction of approximately 5% compared to classical RRT*, with larger improvements observed in complex environments. The method also maintains an overall success rate above 99% across varying obstacle densities. These findings indicate that convex-guided neural sampling provides an effective balance between computational efficiency and solution quality, supporting its applicability to time-sensitive robotic navigation tasks.

Achieving both efficient pushability (propulsion transmission) and proximally concentrated bending for steerability is challenging for magnetically actuated soft catheters: higher axial/bending stiffness improves force transmission but reduces steerability, whereas lower stiffness enables large, proximally concentrated bending yet increases kinking/buckling risk under compressive push loads. To address this trade-off, we propose a stiffness-optimized multi-segment magnetically actuated catheter (SO-MAC) that integrates a decoupled steering-advancement mechanism with a gradient-stiffness architecture. The SO-MAC concentrates bending about a stable proximal pivot during advancement while the distal section passively self-straightens to transmit propulsion, aided by the optimized stiffness distribution and elastic recovery of the spring backbone against friction-induced kinking/buckling. Over $0{-}180^{\circ}$ combined steering and advancement, the pivot remained stable and the distal tip advanced near-straight toward the target direction. A 1.5 mm-diameter SO-MAC achieved up to $180^{\circ}$ steering with a 3 mm bending radius at its 10 mm tip, with an average shape error of $1.39 \pm 0.56$ mm and a steering-pivot error of $0.35 \pm 0.10$ mm. Visual feedback control in a bronchial phantom further confirmed robust navigation through highly curved, bifurcating paths.

Limbless terrestrial animals exhibit exceptional locomotor versatility and control, currently unmatched by engineered counterparts. Here, we introduce a computational framework that enables soft synthetic snakes to navigate unstructured, heterogeneous 3D terrains. Our approach is grounded in bio-inspired actuation and sensing models that reduce the control complexity inherent to high-degree-of-freedom, continuum bodies. These models are integrated into a reinforcement learning architecture to derive environment-traversing policies. Training first occurs in simplified, homogeneous terrains to learn locomotion primitives. These are then composed into adaptive strategies for complex landscapes. We demonstrate robustness by deploying a snake in high-fidelity 3D environments reconstructed from real-world imaging, achieving reliable navigation. Overall, this work provides a physically-realistic simulation platform and practical insights for the control of continuum systems in natural terrains.