Peer Revenue Equity in science

Papers

Fresh from arXiv, typeset properly. Highlighted words trade on the market.

Computer Science Robotics

cs.RO Watch Robotics

Saturday 4 October

Robotics

A Real-Time Framework for Intermediate Map Construction and Kinematically Feasible Off-Road Planning Without OSM

Otobong Jerome, Geesara Prathap Kulathunga, Devitt Dmitry et al. (+2 more)

Off-road environments present unique challenges for autonomous navigation due to their complex and unstructured nature. Traditional global path-planning methods, which typically aim to minimize path length and travel time, perform poorly on large-scale maps and fail to account for critical factors such as real-time performance, kinematic feasibility, and memory efficiency. This paper introduces a novel global path-planning method specifically designed for off-road environments, addressing these essential factors. The method begins by constructing an intermediate map within the pixel coordinate system, incorporating geographical features like off-road trails, waterways, restricted and passable areas, and trees. The planning problem is then divided into three sub-problems: graph-based path planning, kinematic feasibility checking, and path smoothing. This approach effectively meets real-time performance requirements while ensuring kinematic feasibility and efficient memory use. The method was tested in various off-road environments with large-scale maps up to several square kilometers in size, successfully identifying feasible paths in an average of 1.5 seconds and utilizing approximately 1.5GB of memory under extreme conditions. The proposed framework is versatile and applicable to a wide range of off-road autonomous navigation tasks, including search and rescue missions and agricultural operations.
Read the full abstract

All authors Otobong Jerome, Geesara Prathap Kulathunga, Devitt Dmitry, Eugene Murawjow, Alexandr Klimchik

Robotics

TCB-VIO: Tightly-Coupled Focal-Plane Binary-Enhanced Visual Inertial Odometry

Matthew Lisondra, Junseo Kim, Glenn Takashi Shimoda et al. (+2 more)

Vision algorithms can be executed directly on the image sensor when implemented on the next-generation sensors known as focal-plane sensor-processor arrays (FPSP)s, where every pixel has a processor. FPSPs greatly improve latency, reducing the problems associated with the bottleneck of data transfer from a vision sensor to a processor. FPSPs accelerate vision-based algorithms such as visual-inertial odometry (VIO). However, VIO frameworks suffer from spatial drift due to the vision-based pose estimation, whilst temporal drift arises from the inertial measurements. FPSPs circumvent the spatial drift by operating at a high frame rate to match the high-frequency output of the inertial measurements. In this paper, we present TCB-VIO, a tightly-coupled 6 degrees-of-freedom VIO by a Multi-State Constraint Kalman Filter (MSCKF), operating at a high frame-rate of 250 FPS and from IMU measurements obtained at 400 Hz. TCB-VIO outperforms state-of-the-art methods: ROVIO, VINS-Mono, and ORB-SLAM3.
Read the full abstract

All authors Matthew Lisondra, Junseo Kim, Glenn Takashi Shimoda, Kourosh Zareinia, Sajad Saeedi

Robotics · Cross-listed from cs.CV

OpenFLAME: Federated Visual Positioning System to Enable Large-Scale Augmented Reality Applications

Sagar Bharadwaj, Harrison Williams, Luke Wang et al. (+4 more)

World-scale augmented reality (AR) applications need a ubiquitous 6DoF localization backend to anchor content to the real world consistently across devices. Large organizations such as Google and Niantic are 3D scanning outdoor public spaces in order to build their own Visual Positioning Systems (VPS). These centralized VPS solutions fail to meet the needs of many future AR applications – they do not cover private indoor spaces because of privacy concerns, regulations, and the labor bottleneck of updating and maintaining 3D scans. In this paper, we present OpenFLAME, a federated VPS backend that allows independent organizations to 3D scan and maintain a separate VPS service for their own spaces. This enables access control of indoor 3D scans, distributed maintenance of the VPS backend, and encourages larger coverage. Sharding of VPS services introduces several unique challenges – coherency of localization results across spaces, quality control of VPS services, selection of the right VPS service for a location, and many others. We introduce the concept of federated image-based localization and provide reference solutions for managing and merging data across maps without sharing private data.
Read the full abstract

All authors Sagar Bharadwaj, Harrison Williams, Luke Wang, Michael Liang, Tao Jin, Srinivasan Seshan, Anthony Rowe

Robotics

WAFFLE: A Wearable Approach to Bite Timing Estimation in Robot-Assisted Feeding

Akhil Padmanabha, Jessie Yuan, Tanisha Mehta et al. (+10 more)

Millions of people around the world need assistance with feeding. Robotic feeding systems offer the potential to enhance autonomy and quality of life for individuals with impairments and reduce caregiver workload. However, their widespread adoption has been limited by technical challenges such as estimating bite timing, the appropriate moment for the robot to transfer food to a user's mouth. In this work, we introduce WAFFLE: Wearable Approach For Feeding with LEarned bite timing, a system that accurately predicts bite timing by leveraging wearable sensor data to be highly reactive to natural user cues such as head movements, chewing, and talking. We train a supervised regression model on bite timing data from 14 participants and incorporate a user-adjustable assertiveness threshold to convert predictions into proceed or stop commands. In a study with 15 participants without motor impairments with the Obi feeding robot, WAFFLE performs statistically on par with or better than baseline methods across measures of feeling of control, robot understanding, and workload, and is preferred by the majority of participants for both individual and social dining. We further demonstrate WAFFLE's generalizability in a study with 2 participants with motor impairments in their home environments using a Kinova 7DOF robot. Our findings support WAFFLE's effectiveness in enabling natural, reactive bite timing that generalizes across users, robot hardware, robot positioning, feeding trajectories, foods, and both individual and social dining contexts.
Read the full abstract

All authors Akhil Padmanabha, Jessie Yuan, Tanisha Mehta, Rajat Kumar Jenamani, Eric Hu, Victoria de León, Anthony Wertz, Janavi Gupta, Ben Dodson, Yunting Yan, Carmel Majidi, Tapomayukh Bhattacharjee, Zackory Erickson

Robotics · Cross-listed from cs.CV

GAE: Unleashing Physical Potential of VLM with Generalizable Action Expert

Mingyu Liu, Zheng Huang, Xiaoyi Lin et al. (+6 more)

Vision-language models demonstrate strong reasoning and planning abilities, yet grounding these predictions into precise robot actions remains a central challenge. Existing Vision-Language-Action methods typically entangle reasoning and action generation, leading to limited generalization. We propose Generalizable Action Expert (GAE), a task-agnostic model that converts sparse geometric plans into dense robot actions. Our approach introduces a sparse geometric interface: the VLM predicts sparse 3D waypoints representing high-level intention, while GAE maps these waypoints together with real-time point cloud observations to continuous action trajectories. GAE is pretrained on a large-scale pointcloud-trajectory dataset comprising 150k trajectories from both simulation and real-world robots. To further improve efficiency and generalization, we introduce an Action Pre-training, Pointcloud Fine-tuning (APPF) scheme that decouples learning action dynamics from geometry grounding. After pretraining, GAE is frozen and reused across downstream tasks, requiring only lightweight fine-tuning of the VLM to produce the sparse interface. Experiments show that our method achieves strong performance and generalization across diverse visual domains, camera viewpoints, and natural language instructions.
Read the full abstract

All authors Mingyu Liu, Zheng Huang, Xiaoyi Lin, Muzhi Zhu, Canyu Zhao, Yating Wang, Haoyi Zhu, Hao Chen, Chunhua Shen

Robotics

NoTVLA: Semantics-Preserving Robot Adaptation via Narrative Action Interfaces

Zheng Huang, Mingyu Liu, Xiaoyi Lin et al. (+9 more)

Vision-Language-Action (VLA) models represent a pivotal advance in embodied intelligence, yet they confront critical barriers to real-world deployment, most notably catastrophic forgetting. This issue stems from their overreliance on continuous action sequences or action chunks, which inadvertently create isolated data silos that disrupt knowledge retention across tasks. To tackle these challenges, we propose the Narrowing of Trajectory VLA (NoTVLA) framework: a novel approach that narrows its focus to sparse trajectories, thereby avoiding the catastrophic forgetting associated with dense trajectory fine-tuning. A key innovation of NoTVLA lies in its trajectory planning strategy: instead of centering on the target object's trajectory, it leverages temporal compression and spatial reasoning pruning specifically for the robot end effector's trajectory. Furthermore, training is conducted using these sparse trajectories rather than dense action trajectories, an optimization that delivers remarkable practical advantages with better performance in zero-shot. In multi-task evaluation scenarios, NoTVLA achieves superior performance and generalization compared to pi0 while operating under two critical constraints: it uses over an order of magnitude less computing power than pi0 and requires no wrist-mounted camera. This design ensures that NoTVLA's operational accuracy closely approximates that of single-task expert models. Crucially, it also preserves the model's inherent language capabilities, enabling zero-shot generalization in specific scenarios, supporting unified model deployment across multiple robot platforms, and fostering a degree of generalization even when perceiving tasks from novel perspectives.
Read the full abstract

All authors Zheng Huang, Mingyu Liu, Xiaoyi Lin, Muzhi Zhu, Canyu Zhao, Zongze Du, Ye Lin, Xiaoman Li, Yiduo Jia, Hao Zhong, Hao Chen, Chunhua Shen

Robotics

Seeing the Bigger Picture: 3D Latent Mapping for Mobile Manipulation Policy Learning

Sunghwan Kim, Woojeh Chung, Zhirui Dai et al. (+5 more)

In this paper, we demonstrate that mobile manipulation policies utilizing a 3D latent map achieve stronger spatial and temporal reasoning than policies relying solely on images. We introduce Seeing the Bigger Picture (SBP), an end-to-end policy learning approach that operates directly on a 3D map of latent features. In SBP, the map extends perception beyond the robot's current field of view and aggregates observations over long horizons. Our mapping approach incrementally fuses multiview observations into a grid of scene-specific latent features. A pre-trained, scene-agnostic decoder reconstructs target embeddings from these features and enables online optimization of the map features during task execution. A policy, trainable with behavior cloning or reinforcement learning, treats the latent map as a state variable and uses global context from the map obtained via a 3D feature aggregator. We evaluate SBP on scene-level mobile manipulation and sequential tabletop manipulation tasks. Our experiments demonstrate that SBP (i) reasons globally over the scene, (ii) leverages the map as long-horizon memory, and (iii) outperforms image-based policies in both in-distribution and novel scenes, e.g., improving the success rate by 15% for the sequential manipulation task.
Read the full abstract

All authors Sunghwan Kim, Woojeh Chung, Zhirui Dai, Dwait Bhatt, Arth Shukla, Hao Su, Yulun Tian, Nikolay Atanasov

Robotics

COVER:COverage-VErified Roadmaps for Fixed-time Motion Planning in Continuous Semi-Static Environments

Niranjan Kumar Ilampooranan and Constantinos Chamzas

The ability to solve motion-planning queries within a fixed time budget is critical for deploying robotic systems in time-sensitive applications. Semi-static environments, where most of the workspace remains fixed while a subset of obstacles varies between tasks, exhibit structured variability that can be exploited to provide stronger guarantees than general-purpose planners. However, existing approaches either lack formal coverage guarantees or rely on discretizations of obstacle configurations that restrict applicability to realistic domains. This paper introduces COVER, a framework that incrementally constructs coverage-verified roadmaps for semi-static environments. COVER decomposes the arrangement space by independently partitioning the configuration space of each movable obstacle and verifies roadmap feasibility within each partition, enabling fixed-time query resolution for verified regions.We evaluate COVER on a 7-DoF manipulator performing object-picking in tabletop and shelf environments, demonstrating broader problem-space coverage and higher query success rates than prior work, particularly with obstacles of different sizes.
Read the full abstract

Robotics · Cross-listed from cs.CV

LIBERO-PRO: Towards Robust and Fair Evaluation of Vision-Language-Action Models Beyond Memorization

Xueyang Zhou, Yangming Xu, Guiyao Tie et al. (+5 more)

LIBERO has emerged as a widely adopted benchmark for evaluating Vision-Language-Action (VLA) models; however, its current training and evaluation settings are problematic, often leading to inflated performance estimates and preventing fair model comparison. To address these issues, we introduce LIBERO-PRO, an extended LIBERO benchmark that systematically evaluates model performance under reasonable perturbations across four dimensions: manipulated objects, initial states, task instructions, and environments. Experimental results reveal that, although existing models achieve over 90% accuracy under the standard LIBERO evaluation, their performance collapses to 0.0% under our generalized setting. Crucially, this discrepancy exposes the models' reliance on rote memorization of action sequences and environment layouts from the training set, rather than genuine task understanding or environmental perception. For instance, models persist in executing grasping actions when the target object is replaced with irrelevant items, and their outputs remain unchanged even when given corrupted instructions or even messy tokens. These findings expose the severe flaws in current evaluation practices, and we call on the community to abandon misleading methodologies in favor of robust assessments of model generalization and comprehension. Our code is available at: https://github.com/Zxy-MLlab/LIBERO-PRO.
Read the full abstract

All authors Xueyang Zhou, Yangming Xu, Guiyao Tie, Yongchao Chen, Guowen Zhang, Duanfeng Chu, Pan Zhou, Lichao Sun

Robotics · Cross-listed from cs.LG

Distributed Area Coverage with High Altitude Balloons Using Multi-Agent Reinforcement Learning

Adam Haroon and Tristan Schuler

High Altitude Balloons (HABs) can leverage stratospheric wind layers for limited horizontal control, enabling applications in reconnaissance, environmental monitoring, and communications networks. Existing multi-agent HAB coordination approaches use deterministic methods like Voronoi partitioning and extremum seeking control for large global constellations, which perform poorly for smaller teams and localized missions. While single-agent HAB control using reinforcement learning has been demonstrated on HABs, coordinated multi-agent reinforcement learning (MARL) has not yet been investigated. This work presents the first systematic application of multi-agent reinforcement learning (MARL) to HAB coordination for distributed area coverage. We extend our previously developed reinforcement learning simulation environment (RLHAB) to support cooperative multi-agent learning, enabling multiple agents to operate simultaneously in realistic atmospheric conditions. We adapt QMIX for HAB area coverage coordination, leveraging Centralized Training with Decentralized Execution to address atmospheric vehicle coordination challenges. Our approach employs specialized observation spaces providing individual state, environmental context, and teammate data, with hierarchical rewards prioritizing coverage while encouraging spatial distribution. We demonstrate that QMIX achieves similar performance to the theoretically optimal geometric deterministic method for distributed area coverage, validating the MARL approach and providing a foundation for more complex autonomous multi-HAB missions where deterministic methods become intractable.
Read the full abstract

Robotics

Trajectory prediction for heterogeneous agents: A performance analysis on small and imbalanced datasets

Tiago Rodrigues de Almeida, Yufei Zhu, Andrey Rudenko et al. (+4 more)

Robots and other intelligent systems navigating in complex dynamic environments should predict future actions and intentions of surrounding agents to reach their goals efficiently and avoid collisions. The dynamics of those agents strongly depends on their tasks, roles, or observable labels. Class-conditioned motion prediction is thus an appealing way to reduce forecast uncertainty and get more accurate predictions for heterogeneous agents. However, this is hardly explored in the prior art, especially for mobile robots and in limited data applications. In this paper, we analyse different class-conditioned trajectory prediction methods on two datasets. We propose a set of conditional pattern-based and efficient deep learning-based baselines, and evaluate their performance on robotics and outdoors datasets (THÖR-MAGNI and Stanford Drone Dataset). Our experiments show that all methods improve accuracy in most of the settings when considering class labels. More importantly, we observe that there are significant differences when learning from imbalanced datasets, or in new environments where sufficient data is not available. In particular, we find that deep learning methods perform better on balanced datasets, but in applications with limited data, e.g., cold start of a robot in a new environment, or imbalanced classes, pattern-based methods may be preferable.
Read the full abstract

All authors Tiago Rodrigues de Almeida, Yufei Zhu, Andrey Rudenko, Tomasz P. Kucner, Johannes A. Stork, Martin Magnusson, Achim J. Lilienthal

Robotics

Model-Based Adaptive Precision Control for Tabletop Planar Pushing Under Uncertain Dynamics

Aydin Ahmadi and Baris Akgun

Data-driven planar pushing methods have recently gained attention as they reduce manual engineering effort and improve generalization compared to analytical approaches. However, most prior work targets narrow capabilities (e.g., side switching, precision, or single-task training), limiting broader applicability. We present a model-based framework for non-prehensile tabletop pushing that uses a single learned model to address multiple tasks without retraining. Our approach employs a recurrent GRU-based architecture with additional non-linear layers to capture object-environment dynamics while ensuring stability. A tailored state-action representation enables the model to generalize across uncertain dynamics, variable push lengths, and diverse tasks. For control, we integrate the learned dynamics with a sampling-based Model Predictive Path Integral (MPPI) controller, which generates adaptive, task-oriented actions. This framework supports side switching, variable-length pushes, and objectives such as precise positioning, trajectory following, and obstacle avoidance. Training is performed in simulation with domain randomization to support sim-to-real transfer. We first evaluate the architecture through ablation studies, showing improved prediction accuracy and stable rollouts. We then validate the full system in simulation and real-world experiments using a Franka Panda robot with markerless tracking. Results demonstrate high success rates in precise positioning under strict thresholds and strong performance in trajectory tracking and obstacle avoidance. Moreover, multiple tasks are solved simply by changing the controller's objective function, without retraining. While our current focus is on a single object type, we extend the framework by training on wider push lengths and designing a balanced controller that reduces the number of steps for longer-horizon goals.
Read the full abstract

Robotics

EmbodiSwap for Zero-Shot Robot Imitation Learning

Eadom Dessalene, Pavan Mantripragada, Michael Maynord et al. (+1 more)

We introduce EmbodiSwap - a method for producing photorealistic synthetic robot overlays over human video. We employ EmbodiSwap for zero-shot imitation learning, bridging the embodiment gap between in-the-wild ego-centric human video and a target robot embodiment. We train a closed-loop robot manipulation policy over the data produced by EmbodiSwap. We make novel use of V-JEPA as a visual backbone, repurposing V-JEPA from the domain of video understanding to imitation learning over synthetic robot videos. Adoption of V-JEPA outperforms alternative vision backbones more conventionally used within robotics. In real-world tests, our zero-shot trained V-JEPA model achieves an $82\%$ success rate, outperforming a few-shot trained $\pi_0$ network as well as $\pi_0$ trained over data produced by EmbodiSwap. We release (i) code for generating the synthetic robot overlays which takes as input human videos and an arbitrary robot URDF and generates a robot dataset, (ii) the robot dataset we synthesize over EPIC-Kitchens, HOI4D and Ego4D, and (iii) model checkpoints and inference code, to facilitate reproducible research and broader adoption.
Read the full abstract

All authors Eadom Dessalene, Pavan Mantripragada, Michael Maynord, Yiannis Aloimonos

Robotics

Robust Visual Embodiment: How Robots Discover Their Bodies in Real Environments

Salim Rezvani, Ammar Jaleel Mahmood and Robin Chhabra

Robots with internal visual self-models promise unprecedented adaptability, yet existing autonomous modeling pipelines remain fragile under realistic sensing conditions such as noisy imagery and cluttered backgrounds. This paper presents the first systematic study quantifying how visual degradations–including blur, salt-and-pepper noise, and Gaussian noise–affect robotic self-modeling. Through both simulation and physical experiments, we demonstrate their impact on morphology prediction, trajectory planning, and damage recovery in state-of-the-art pipelines. To overcome these challenges, we introduce a task-aware denoising framework that couples classical restoration with morphology-preserving constraints, ensuring retention of structural cues critical for self-modeling. In addition, we integrate semantic segmentation to robustly isolate robots from cluttered and colorful scenes. Extensive experiments show that our approach restores near-baseline performance across simulated and physical platforms, while existing pipelines degrade significantly. These contributions advance the robustness of visual self-modeling and establish practical foundations for deploying self-aware robots in unpredictable real-world environments.
Read the full abstract

Robotics

An Amphibious Untethered Inchworm Soft Robot for Fast Crawling Locomotion

Mohammadjavad Javadi, Charlie Wadds and Robin Chhabra

Untethered soft robots are essential for advancing the real-world deployment of soft robotic systems in diverse and multitasking environments. Inspired by soft-bodied inchworm, we present a fully untethered soft robot with a curved, flexible structure actuated by magnetic forces. The robot has a total mass of 102.63 g and demonstrates multimodal locomotion, achieving a maximum walking speed of 3.74 cm/s and a swimming speed of 0.82 cm/s. A compact and lightweight onboard control circuit enables wireless command transmission, while an integrated camera provides environmental perception. Through structural optimization and system-level integration, the robot successfully performs walking, steering, swimming, and payload transport without reliance on external infrastructure. The robot's dynamic performance and locomotion capabilities are systematically validated through experimental characterization.
Read the full abstract

Robotics

Geometrically Exact Hard Magneto-Elastic Cosserat Shells: Static Formulation for Shape Morphing

Mohammadjavad Javadi and Robin Chhabra

Cosserat rod theory is the popular approach to modeling ferromagnetic soft robots as 1-Dimensional (1D) slender structures in most applications, such as biomedical. However, recent soft robots designed for locomotion and manipulation often exhibit a large width-to-length ratio that categorizes them as 2D shells. For analysis and shape-morphing control purposes, we develop an efficient coordinate-free static model of hard-magnetic shells found in soft magnetic grippers and walking soft robots. The approach is based on a novel formulation of Cosserat shell theory on the Special Euclidean group ($\mathbf{SE}(3)$). The shell is assumed to be a 2D manifold of material points with six degrees of freedom (position & rotation) suitable for capturing the behavior of a uniformly distributed array of spheroidal hard magnetic particles embedded in the rheological elastomer. The shell's configuration manifold is the space of all smooth embeddings $\mathbb{R}^2\rightarrow\mathbf{SE}(3)$. According to a novel definition of local deformation gradient based on the Lie group structure of $\mathbf{SE}(3)$, we derive the strong and weak forms of equilibrium equations, following the principle of virtual work. We extract the linearized version of the weak form for numerical implementations. The resulting finite element approach can avoid well-known challenges such as singularity and locking phenomenon in modeling shell structures. The proposed model is analytically and experimentally validated through a series of test cases that demonstrate its superior efficacy, particularly when the shell undergoes severe rotations and displacements.
Read the full abstract

Robotics

Safety-Oriented Dynamic Path Planning for Automated Vehicles

Mostafa Emam and Matthias Gerdts

Ensuring safety in autonomous vehicles necessitates advanced path planning and obstacle avoidance capabilities, particularly in dynamic environments. This paper introduces a bi-level control framework that efficiently augments road boundaries by incorporating time-dependent grid projections of obstacle movements, thus enabling precise and adaptive path planning. The main control loop utilizes Nonlinear Model Predictive Control (NMPC) for real-time path optimization, wherein homotopy-based constraint relaxation is employed to improve the solvability of the optimal control problem (OCP). Furthermore, an independent backup loop runs concurrently to provide safe fallback trajectories when an optimal trajectory cannot be computed by the main loop within a critical time frame, thus enhancing safety and real-time performance. Our evaluation showcases the benefits of the proposed methods in various driving scenarios, highlighting the real-time applicability and robustness of our approach. Overall, the framework represents a significant step towards safer and more reliable autonomous driving in complex and dynamic environments.
Read the full abstract

Robotics

Learning to Act Through Contact: A Unified View of Multi-Task Robot Learning

Shafeef Omar and Majid Khadiv

We present a unified framework for multi-task locomotion and manipulation policy learning grounded in a contact-explicit representation. Instead of designing different policies for different tasks, our approach unifies the definition of a task through a sequence of contact goals–desired contact positions, timings, and active end-effectors. This enables leveraging the shared structure across diverse contact-rich tasks, leading to a single policy that can perform a wide range of tasks. In particular, we train a goal-conditioned reinforcement learning (RL) policy to realise given contact plans. We validate our framework on multiple robotic embodiments and tasks: a quadruped performing multiple gaits, a humanoid performing multiple biped and quadrupedal gaits, and a humanoid executing different bimanual object manipulation tasks. Each of these scenarios is controlled by a single policy trained to execute different tasks grounded in contacts, demonstrating versatile and robust behaviours across morphologically distinct systems. Our results show that explicit contact reasoning significantly improves generalisation to unseen scenarios, positioning contact-explicit policy learning as a promising foundation for scalable loco-manipulation. Video available at: https://youtu.be/idHx67oHHU0?si=qZJ7C0ujemXNWgA5
Read the full abstract

Robotics · Cross-listed from cs.LG

Deep Reinforcement Learning for Multi-Agent Coordination

Kehinde O. Aina and Sehoon Ha

We address the challenge of coordinating multiple robots in narrow and confined environments, where congestion and interference often hinder collective task performance. Drawing inspiration from insect colonies, which achieve robust coordination through stigmergy – modifying and interpreting environmental traces – we propose a Stigmergic Multi-Agent Deep Reinforcement Learning (S-MADRL) framework that leverages virtual pheromones to model local and social interactions, enabling decentralized emergent coordination without explicit communication. To overcome the convergence and scalability limitations of existing algorithms such as MADQN, MADDPG, and MAPPO, we leverage curriculum learning, which decomposes complex tasks into progressively harder sub-problems. Simulation results show that our framework achieves the most effective coordination of up to eight agents, where robots self-organize into asymmetric workload distributions that reduce congestion and modulate group performance. This emergent behavior, analogous to strategies observed in nature, demonstrates a scalable solution for decentralized multi-agent coordination in crowded environments with communication constraints.
Read the full abstract

Friday 3 October

Robotics

Shape-Space Graphs: Fast and Collision-Free Path Planning for Soft Robots

Carina Veil, Moritz Flaschel and Ellen Kuhl

Soft robots, inspired by elephant trunks or octopus arms, offer extraordinary flexibility to bend, twist, and elongate in ways that rigid robots cannot. However, their motion planning remains a challenge, especially in cluttered environments with obstacles, due to their highly nonlinear and infinite-dimensional kinematics. Here, we present a graph-based path planning tool for an elephant-trunk-inspired soft robot designed with three artificial muscle fibers that allow for continuous deformation through contraction. Using a biomechanical model that integrates morphoelastic and active filament theories, we precompute a shape library and construct a k-nearest neighbor graph in shape space, ensuring that each node corresponds to a valid robot shape. For the graph, we use signed distance functions to prune nodes and edges colliding with obstacles, and define multi-objective edge costs based on geometric distance and actuation effort, enabling energy-aware planning with collision avoidance. We demonstrate that our algorithm reliably avoids obstacles and generates feasible paths within milliseconds from precomputed graphs using Dijkstra's algorithm. We show that including energy costs can drastically reduce the actuation effort compared to geometry-only planning, at the expense of longer tip trajectories. Our results highlight the potential of shape-space graph search for fast and reliable path planning in the field of soft robotics, paving the way for real-time applications in surgical, industrial, and assistive settings.
Read the full abstract

Robotics · Cross-listed from cs.CV

SketchPlan: Diffusion Based Drone Planning From Human Sketches

Sixten Norelius, Aaron O. Feldman and Mac Schwager

We propose SketchPlan, a diffusion-based planner that interprets 2D hand-drawn sketches over depth images to generate 3D flight paths for drone navigation. SketchPlan comprises two components: a SketchAdapter that learns to map the human sketches to projected 2D paths, and DiffPath, a diffusion model that infers 3D trajectories from 2D projections and a first person view depth image. Our model achieves zero-shot sim-to-real transfer, generating accurate and safe flight paths in previously unseen real-world environments. To train the model, we build a synthetic dataset of 32k flight paths using a diverse set of photorealistic 3D Gaussian Splatting scenes. We automatically label the data by computing 2D projections of the 3D flight paths onto the camera plane, and use this to train the DiffPath diffusion model. However, since real human 2D sketches differ significantly from ideal 2D projections, we additionally label 872 of the 3D flight paths with real human sketches and use this to train the SketchAdapter to infer the 2D projection from the human sketch. We demonstrate SketchPlan's effectiveness in both simulated and real-world experiments, and show through ablations that training on a mix of human labeled and auto-labeled data together with a modular design significantly boosts its capabilities to correctly interpret human intent and infer 3D paths. In real-world drone tests, SketchPlan achieved 100% success in low/medium clutter and 40% in unseen high-clutter environments, outperforming key ablations by 20-60% in task completion.
Read the full abstract

Robotics · Cross-listed from math.OC

Agile Tradespace Exploration for Space Rendezvous Mission Design via Transformers

Yuji Takubo, Daniele Gammelli, Marco Pavone et al. (+1 more)

Spacecraft rendezvous enables on-orbit servicing, debris removal, and crewed docking, forming the foundation for a scalable space economy. Designing such missions requires rapid exploration of the tradespace between control cost and flight time across multiple candidate targets. However, multi-objective optimization in this setting is challenging, as the underlying constraints are often nonconvex, and mission designers must balance accuracy (e.g., solving the full problem) with efficiency (e.g., convex relaxations), slowing iteration and limiting design agility. To address these challenges, this paper proposes an AI-powered framework that enables agile and generalized rendezvous mission design. Given the orbital information of the target spacecraft, boundary conditions of the servicer, and a range of flight times, a transformer model generates a set of near-Pareto optimal trajectories across varying flight times in a single parallelized inference step, thereby enabling rapid mission trade studies. The model is further extended to accommodate variable flight times and perturbed orbital dynamics, supporting realistic multi-objective trade-offs. Validation on chance-constrained rendezvous problems in Earth orbits with passive safety constraints demonstrates that the model generalizes across both flight times and dynamics, consistently providing high-quality initial guesses that converge to superior solutions in fewer iterations. Moreover, the framework efficiently approximates the Pareto front, achieving runtimes comparable to convex relaxation by exploiting parallelized inference. Together, these results position the proposed framework as a practical surrogate for nonconvex trajectory generation and mark an important step toward AI-driven trajectory design for accelerating preliminary mission planning in real-world rendezvous applications.
Read the full abstract

All authors Yuji Takubo, Daniele Gammelli, Marco Pavone, Simone D'Amico

Robotics

Efficient Surgical Robotic Instrument Pose Reconstruction in Real World Conditions Using Unified Feature Detection

Zekai Liang, Kazuya Miyata, Xiao Liang et al. (+2 more)

Accurate camera-to-robot calibration is essential for any vision-based robotic control system and especially critical in minimally invasive surgical robots, where instruments conduct precise micro-manipulations. However, MIS robots have long kinematic chains and partial visibility of their degrees of freedom in the camera, which introduces challenges for conventional camera-to-robot calibration methods that assume stiff robots with good visibility. Previous works have investigated both keypoint-based and rendering-based approaches to address this challenge in real-world conditions; however, they often struggle with consistent feature detection or have long inference times, neither of which are ideal for online robot control. In this work, we propose a novel framework that unifies the detection of geometric primitives (keypoints and shaft edges) through a shared encoding, enabling efficient pose estimation via projection geometry. This architecture detects both keypoints and edges in a single inference and is trained on large-scale synthetic data with projective labeling. This method is evaluated across both feature detection and pose estimation, with qualitative and quantitative results demonstrating fast performance and state-of-the-art accuracy in challenging surgical environments.
Read the full abstract

All authors Zekai Liang, Kazuya Miyata, Xiao Liang, Florian Richter, Michael C. Yip

Robotics

LapSurgie: Humanoid Robots Performing Surgery via Teleoperated Handheld Laparoscopy

Zekai Liang, Xiao Liang, Soofiyan Atar et al. (+7 more)

Robotic laparoscopic surgery has gained increasing attention in recent years for its potential to deliver more efficient and precise minimally invasive procedures. However, adoption of surgical robotic platforms remains largely confined to high-resource medical centers, exacerbating healthcare disparities in rural and low-resource regions. To close this gap, a range of solutions has been explored, from remote mentorship to fully remote telesurgery. Yet, the practical deployment of surgical robotic systems to underserved communities remains an unsolved challenge. Humanoid systems offer a promising path toward deployability, as they can directly operate in environments designed for humans without extensive infrastructure modifications – including operating rooms. In this work, we introduce LapSurgie, the first humanoid-robot-based laparoscopic teleoperation framework. The system leverages an inverse-mapping strategy for manual-wristed laparoscopic instruments that abides to remote center-of-motion constraints, enabling precise hand-to-tool control of off-the-shelf surgical laparoscopic tools without additional setup requirements. A control console equipped with a stereo vision system provides real-time visual feedback. Finally, a comprehensive user study across platforms demonstrates the effectiveness of the proposed framework and provides initial evidence for the feasibility of deploying humanoid robots in laparoscopic procedures.
Read the full abstract

All authors Zekai Liang, Xiao Liang, Soofiyan Atar, Sreyan Das, Zoe Chiu, Peihan Zhang, Calvin Joyce, Florian Richter, Shanglei Liu, Michael C. Yip

Robotics

Connectivity Maintenance and Recovery for Multi-Robot Motion Planning

Yutong Wang, Lishuo Pan, Yichun Qu et al. (+2 more)

Connectivity is crucial in many multi-robot applications, yet balancing connectivity maintenance and fleet traversability in obstacle-rich environments remains challenging. Reactive controllers based on control barrier functions can preserve connectivity when it is initially satisfied, but often struggle with deadlocks in cluttered environments. We propose a real-time Bézier-based constrained motion planning algorithm, namely MPC–CLF–CBF, that produces trajectories and control inputs concurrently, subject to high-order control barrier function and control Lyapunov function constraints. Our motion planner supports connectivity-aware navigation in cluttered workspaces and recovers connectivity from initially disconnected configurations and after temporary obstacle-induced separation; it also provides analytic continuous-time derivatives, facilitating its application to agile differentially flat systems such as quadrotors. In simulations with $4$–$12$ robots, it maintains $95.8$–$100\%$ graph-connected time at $20\%$ obstacle density, compared with $48.9$–$61.3\%$ for MPC–CBF, with no observed collisions. We further validate the planner in a physical experiment with $8$ Crazyflie nano-quadrotors.
Read the full abstract

All authors Yutong Wang, Lishuo Pan, Yichun Qu, Tengxiang Wang, Nora Ayanian

Robotics · Cross-listed from cs.CV

Real-Time Threaded Houbara Detection and Segmentation for Wildlife Conservation using Mobile Platforms

Lyes Saad Saoud, Loic Lesobre, Enrico Sorato et al. (+1 more)

Real-time animal detection and segmentation in natural environments are vital for wildlife conservation, enabling non-invasive monitoring through remote camera streams. However, these tasks remain challenging due to limited computational resources and the cryptic appearance of many species. We propose a mobile-optimized two-stage deep learning framework that integrates a Threading Detection Model (TDM) to parallelize YOLOv10-based detection and MobileSAM-based segmentation. Unlike prior YOLO+SAM pipelines, our approach improves real-time performance by reducing latency through threading. YOLOv10 handles detection while MobileSAM performs lightweight segmentation, both executed concurrently for efficient resource use. On the cryptic Houbara Bustard, a conservation-priority species, our model achieves mAP50 of 0.9627, mAP75 of 0.7731, mAP95 of 0.7178, and a MobileSAM mIoU of 0.7421. YOLOv10 operates at 43.7 ms per frame, confirming real-time readiness. We introduce a curated Houbara dataset of 40,000 annotated images to support model training and evaluation across diverse conditions. The code and dataset used in this study are publicly available on GitHub at https://github.com/LyesSaadSaoud/mobile-houbara-detseg. For interactive demos and additional resources, visit https://lyessaadsaoud.github.io/LyesSaadSaoud-Threaded-YOLO-SAM-Houbara.
Read the full abstract

All authors Lyes Saad Saoud, Loic Lesobre, Enrico Sorato, Irfan Hussain

Robotics

Digital-Twin Evaluation for Proactive Human-Robot Collision Avoidance via Prediction-Guided A-RRT*

Vadivelan Murugesan, Rajasundaram Mathiazhagan, Sanjana Joshi et al. (+1 more)

Human-robot collaboration requires precise prediction of human motion over extended horizons to enable proactive collision avoidance. Unlike existing planners that rely solely on kinodynamic models, we present a prediction-driven safe planning framework that leverages granular, joint-by-joint human motion forecasting validated in a physics-based digital twin. A capsule-based artificial potential field (APF) converts these granular predictions into collision risk metrics, triggering an Adaptive RRT* (A-RRT*) planner when thresholds are exceeded. The depth camera is used to extract 3D skeletal poses and a convolutional neural network-bidirectional long short-term memory (CNN-BiLSTM) model to predict individual joint trajectories ahead of time. A digital twin model integrates real-time human posture prediction placed in front of a simulated robot to evaluate motions and physical contacts. The proposed method enables validation of planned trajectories ahead of time and bridging potential latency gaps in updating planned trajectories in real-time. In 50 trials, our method achieved 100% proactive avoidance with > 250 mm clearance and sub-2 s replanning, demonstrating superior precision and reliability compared to existing kinematic-only planners through the integration of predictive human modeling with digital twin validation.
Read the full abstract

All authors Vadivelan Murugesan, Rajasundaram Mathiazhagan, Sanjana Joshi, Aliasghar Arab

Robotics

Optimization-Based Robust Permissive Synthesis for Interval MDPs

Khang Vo Huynh, David Parker and Lu Feng

We present an optimization-based framework for robust permissive synthesis for Interval Markov Decision Processes (IMDPs). While robust IMDP controller synthesis typically yields a single policy and most permissive-synthesis methods assume exact transition models, we synthesize multi-strategies that retain multiple actions while guaranteeing satisfaction of probabilistic reachability or expected-reward specifications under all admissible transition probabilities. We formulate the problem as a mixed-integer linear program (MILP) that maximizes the number of enabled state–action pairs subject to robust Bellman constraints. We develop two encodings: a direct vertex-enumeration formulation and a dualization-based formulation that avoids explicit enumeration of uncertainty-polytope vertices and has size linear in the number of successor transitions. Experiments on four benchmark domains show that both encodings achieve the same optimal permissiveness and scale to IMDPs with hundreds of thousands of states. Compared with standard robust single-policy synthesis, the resulting multi-strategies retain substantially more action choices.
Read the full abstract

Robotics

Destination-to-Chutes Task Mapping Optimization for Multi-Robot Coordination in Robotic Sorting Systems

Yulun Zhang, Alexandre O. G. Barbosa, Federico Pecora et al. (+1 more)

We study optimizing a destination-to-chutes task mapping to improve throughput in Robotic Sorting Systems (RSS), where a team of robots sort packages on a sortation floor by transporting them from induct workstations to eject chutes based on their shipping destinations (e.g. Los Angeles or Pittsburgh). The destination-to-chutes task mapping is used to determine which chutes a robot can drop its package. Finding a high-quality task mapping is challenging because of the complexity of a real-world RSS. First, optimizing task mapping is interdependent with robot target assignment and path planning. Second, chutes will be CLOSED for a period of time once they receive sufficient packages to allow for downstream processing. Third, task mapping quality directly impacts the downstream processing, as scattered chutes for the same destination increase package handling time. In this paper, we first formally define task mappings and the problem of Task Mapping Optimization (TMO). We then present a simulator of RSS to evaluate task mappings. We then present a simple TMO method based on the Evolutionary Algorithm and Mixed Integer Linear Programming, demonstrating the advantage of our optimized task mappings over the greedily generated ones in various RSS setups with different map sizes, numbers of chutes, and destinations. Finally, we use Quality Diversity algorithms to analyze the throughput of a diverse set of task mappings. Our code is available online at https://github.com/lunjohnzhang/tmo_public.
Read the full abstract

All authors Yulun Zhang, Alexandre O. G. Barbosa, Federico Pecora, Jiaoyang Li

Robotics

A Simulation Evaluation Suite for Robust Adaptive Quadcopter Control

Dingqi Zhang, Ran Tao, Sheng Cheng et al. (+2 more)

Robust adaptive control methods are essential for maintaining quadcopter performance under external disturbances and model uncertainties. However, fragmented evaluations across tasks, simulators, and implementations hinder systematic comparison of these methods. This paper introduces an easy-to-deploy, modular simulation testbed for quadcopter control, built on RotorPy, that enables evaluation under a wide range of disturbances such as wind, payload shifts, rotor faults, and control latency. The framework includes a library of representative adaptive and non-adaptive controllers and provides task-relevant metrics to assess tracking accuracy and robustness. The unified modular environment enables reproducible evaluation across control methods and eliminates redundant reimplementation of components such as disturbance models, trajectory generators, and analysis tools. We illustrate the testbed's versatility through examples spanning multiple disturbance scenarios and trajectory types, including automated stress testing, to demonstrate its utility for systematic analysis. Code is available at https://github.com/Dz298/AdaptiveQuadBench.
Read the full abstract

All authors Dingqi Zhang, Ran Tao, Sheng Cheng, Naira Hovakimyan, Mark W. Mueller