Peer Revenue Returns subject to peer review

Papers

Fresh from arXiv, typeset properly. Highlighted words trade on the market.

Computer Science Robotics

cs.RO Watch Robotics

Monday 20 July

Robotics

VLN-AVP: Zero-Shot Vision-Language Navigation with Hybrid Long-Short-Term Memory for Autonomous Valet Parking

Yijian Li, Xiangru Mu, Changze Li et al. (+7 more)

Existing methods in Autonomous Valet Parking (AVP) typically rely on pre-built maps, which severely restricts their scalability to unseen environments and open-vocabulary targets. Inspired by the application of Vision-Language Models (VLMs) in Vision-Language Navigation (VLN) tasks, we propose VLN-AVP, a zero-shot navigation framework for AVP tasks. By combining the precise spatial perception of a Bird's-Eye-View (BEV) model with the general intelligence of VLMs, our framework 1) eliminates the dependency on pre-built maps, 2) interprets semantic environmental contexts in parking scenarios, and 3) enables intuitive navigation following natural language instructions. Specifically, we introduce a hybrid memory system: a short-term perception memory tracks semantic visual cues to address the limitations of VLM's single-frame reasoning in existing methods, while a long-term topological memory facilitates stable policy learning from past experiences. To bridge the gap in existing benchmarks, we also present the VLN-AVP dataset and benchmark. Featuring 10 high-fidelity parking scenes and over 1,000 navigation episodes, it has the largest number of garage scenes to date and is the first VLN benchmark for underground parking. Extensive experiments demonstrate that in simulation, our method achieves an over 25% improvement in success rate compared to VLN methods and an over 15% improvement compared to other autonomous driving methods. Furthermore, it attains a leading success rate in real-world vehicle experiments, proving its practical feasibility.
Read the full abstract

All authors Yijian Li, Xiangru Mu, Changze Li, Hantian Shi, Jiyuan Cai, Jia Cai, Xiaoxue Liu, Yajing Sun, Ming Yang, Tong Qin

Robotics · Cross-listed from cs.LG

Generalize and Guide: Decomposing Rewards for Few-Shot Inverse Reinforcement Learning

Ziyi Liu and Grace Zhang

Inverse reinforcement learning (IRL) provides a powerful framework for learning from demonstrations. However, real-world tasks often exhibit substantial natural variations (e.g., picking up mugs with varying shapes), making it impractical to collect demonstrations that fully specify a new task under every possible scenario. In practice, while demonstrations for the target task are limited, it is often easier to obtain datasets of heterogeneous but related behaviors. This motivates the problem of few-shot IRL with multi-task demonstrations (FM-IRL), where an agent must learn a new task with substantial variations from only a limited number of target-task demonstrations, together with sufficient demonstrations of related tasks and online agent experience. To do so, we must both recover the expert distribution of the new task and provide guidance when the agent deviates from it. We introduce Multitask discriminator Proximity-Guided IRL (MPG), which learns two complementary reward components: (1) a generalizable discriminator that transfers shared structure across related tasks to identify expert behavior in a new task, and (2) a proximity function that measures how far a state deviates from expert behavior and provides corrective guidance during exploration. We demonstrate the effectiveness of our method on multiple challenging navigation and manipulation tasks under significant variations (e.g., object configurations, table layouts, and initial robot poses), achieving an average success rate of 81.2%, outperforming the strongest per-task baseline by an average of 24.7 percentage points.
Read the full abstract

Robotics

Seg2Grasp: A Robust Modular Suction Grasping in Bin Picking

Hye-Jung Yoon, Juno Kim, Yesol Park et al. (+2 more)

Current bin picking methods that rely heavily on end-to-end learning often falter when confronted with unfamiliar or complex objects in unstructured environments. To overcome these limitations, we introduce Seg2Grasp, a modular pipeline designed for robust suction grasping in dynamic and cluttered bin scenarios. Seg2Grasp is built on a three-step process: Segmentation, Grasping, and Classification. The Segmentation module employs a Transformer-based model to generate class-agnostic object masks from RGB-D images, ensuring accurate detection across various conditions. The Grasping module uses surface normals and mask proposals to determine the optimal suction points, enhancing grasp success. Finally, the Classification module leverages fine-tuned open-vocabulary Mask-CLIP for precise object identification, enabling versatile handling of diverse objects. Real-world robotic experiments demonstrate that Seg2Grasp outperforms existing methods in success rates and adaptability, establishing it as a powerful tool for automated bin picking in industrial settings.
Read the full abstract

All authors Hye-Jung Yoon, Juno Kim, Yesol Park, Jun-Ki Lee, Byoung-Tak Zhang

Robotics

Lifelong Multi-Subsystem Pickup and Delivery with Buffer-Limited Handover Stations

Chuanlong Zang, Isabelle Barz, Anna Mannucci et al. (+3 more)

Coordinating payload transfers between subsystems is a critical challenge in lifelong Multi-Agent Pickup and Delivery (MAPD). We study systems where agents are confined to separate regions and must exchange payloads through shared handover stations. These stations, equipped with single docks and finite buffers, are inherently vulnerable to blocking and starvation. We formalize this problem as Multi-Subsystem MAPD with Buffer-limited Handover Stations (MS-MAPD-BHS). We then propose Handover-Aware Reservation and Routing (HARR), an online controller that couples per-subsystem planners. HARR uses a shared dock reservation calendar and a deterministic rolling-horizon projection of buffer occupancy to coordinate actions. A candidate route is accepted only if its dock interval is free and the resulting buffer occupancy projection remains within capacity. Under perfect execution, these checks ensure collision-free dock use and buffer-safe committed operations within the reservation horizon. In simulation, HARR achieves up to 77% higher throughput and 92% lower backlog than a fixed-dock ablation at moderate load, while also reducing planning time relative to a coupled station-aware Token Passing baseline. These results show that explicit interface coordination substantially improves stability in modular multi-subsystem transport.
Read the full abstract

All authors Chuanlong Zang, Isabelle Barz, Anna Mannucci, Philipp Schillinger, Florian Lier, Wolfgang Hönig

Robotics

SLAM in Low-Light Environments: Project Report

Oleh Basystyi, Anna Stasyshyn, Oleksandr Kosovan et al. (+1 more)

Simultaneous localization and mapping (SLAM) is one of the fundamental problems in robotics, as it enables autonomous operations in real-world scenarios. Under low illumination, reduced contrast, sensor noise, and motion blur degrade both feature extraction and feature matching, while compensating with LiDAR, depth, or thermal sensors raises cost, power draw, and integration complexity. Existing benchmarks remain dominated by well-lit indoor or daylight sequences, leaving open how far SLAM with standard RGB cameras can be pushed in the dark. We benchmark six systems spanning the feature-based, direct, filter-based, and learning-based paradigms - ORB-SLAM3, DSO, Kimera-VIO, OpenVINS, DPVO, and DPV-SLAM - on five LaMARia sequences of varying difficulty and illumination, reporting absolute and relative pose error alongside control-point recall. Kimera-VIO is the only system to track all five sequences to completion, combining the lowest relative pose error with steadily growing absolute error due to the absence of loop closure; DPVO and DPV-SLAM never lose tracking but incur absolute errors of roughly 100 m under low light; and the classical monocular pipelines (ORB-SLAM3, DSO) together with the filter-based OpenVINS fail outright or diverge on most of the harder and low-light sequences. The results suggest that RGB-only SLAM maintains stable low-light tracking only when both inertial fusion and global optimization are present. Closing the remaining gap will likely require low-light-specific learned front-ends or a return to complementary sensing.
Read the full abstract

All authors Oleh Basystyi, Anna Stasyshyn, Oleksandr Kosovan, Yaroslav Prytula

Robotics

HCPG-Flow:Hierarchical Contact-Progress Guidance for Flow-Policy Robot Manipulation

Guanghu Xie, Mingxu Li, Shuo Zhang et al. (+5 more)

Flow policies can represent multimodal action distributions for robot manipulation, yet a robot must execute one action at each control step. When several proposals are sampled, critic-based ranking makes data collection depend on value estimates over candidate actions that may be weakly represented in replay. We introduce HCPG-Flow, an analytic rollout-time selector that augments SAC-Flow with hierarchical, object-centric contact-progress guidance while preserving its actor and critic objectives. HCPG switches from end-effector approach to task progress after contact, scores each proposal by the first-order reduction of a task-relevant distance, standardizes scores within the candidate set, and executes a temperature-controlled action embedding. Across ten simulated tasks, HCPG improves mean success over SAC-Flow on both benchmarks, including a 9.5 percentage-point gain on Maniskill. Four physical tasks further show high success with a 17.4% reduction in successful completion steps.Project page: https://hitxraz.github.io/HCPG-Flow/
Read the full abstract

All authors Guanghu Xie, Mingxu Li, Shuo Zhang, Yonglong Zhang, Yifan Yang, Yang Liu, Zongwu Xie, Baoshi Cao

Robotics

Configuration-Induced Passive Self-Rotation for Perception-Enhanced Autonomous Flight

Xurui Liu, Miao Wang, Tianyu He et al. (+2 more)

Autonomous flight in confined and cluttered environments is fundamentally limited by the restricted field of view (FoV) of onboard sensors. Passive self-rotation expands sensing coverage without additional sensors but introduces a tradeoff between swept-FoV refresh rate and flight performance. This letter presents a configuration-induced passively self-rotating tricopter for perception-enhanced autonomous flight. Firstly, the rear-arm configuration parameter is exploited to regulate the passive self-rotation operating point, providing an airframe-level mechanism for balancing swept-FoV refresh rate and flight performance. Secondly, a hierarchical autonomy framework integrating planning and control is developed to enable agile and robust autonomous flight under continuous passive self-rotation. For waypoint-based inspection, guide-point replanning is further used to improve task-level coverage. Extensive real-world experiments, including high-speed trajectory tracking, disturbance-rejection tests, and autonomous navigation in representative cluttered environments, demonstrate the effectiveness of the proposed approach for perception-enhanced autonomous flight.
Read the full abstract

All authors Xurui Liu, Miao Wang, Tianyu He, Linrui Yang, Xiaobin Zhou

Robotics

Stability and Comfort in Mobile Robot-Pedestrian Interactions

Alireza Jafari, Hong-Son Nguyen and Yen-Chen Liu

Mobile robots in public spaces must ensure pedestrians' comfort, and yet empirical studies of walkers' subjective safety are rare. Many classical navigation algorithms do not distinguish the walkers from dynamic obstacles and do not explicitly model subjective human factors. Moreover, most studies focus on holonomic mobile robots, whereas applications demand Nonholonomic Mobile Robots (NMR). This paper develops socially aware algorithms for NMRs, proves the stability, verifies the performance experimentally, and statistically analyzes the reported comfort. We design a framework for NMRs using Social Force Model (SFM) and the projected Time-to-collision Social Force Model (TSFM). We formalize the NMR-pedestrians' and NMR-obstacles' interactions and prove the system's stability, assuming boundedly nonpassive pedestrians. Simulations calibrate the models by maximizing a hybrid cost function of comfort and speed. Pedestrian-robot interaction experiments compare SFM and TSFM to two remote-controlled baselines and collect walkers' reported comfort. Statistical tools analyze survey results collected during the experiments. Benchmarking the algorithms against previous studies highlights the proposed methods' advantage with respect to the studied metrics. Overall, the models are stable and improve pedestrian comfort when an NMR navigates through a pedestrian crowd.
Read the full abstract

Robotics

Predictive Training with Latent Imagination for Visual Quadruped Navigation

Yancheng Zhu, Wanli Ma, Chen Han et al. (+3 more)

Reinforcement-learning navigation policies for legged robots select actions reactively from current observations and short-term memory, with limited capacity to anticipate how moving obstacles will evolve in the near future. In dynamic environments, this reactivity causes the robot to respond too late because collision risk depends on short-horizon scene structure rather than on current obstacle positions alone. Lightweight predictive supervision applied to the policy's recurrent state during training can encode anticipatory obstacle dynamics without modifying the inference-time controller. We augment a reactive LSTM-SRU navigation backbone with an auxiliary JEPA-style predictor and SIGReg regularization: during training, the predictor supervises the deterministic hidden state to anticipate its own next state; at inference, it is fully discarded, incurring zero additional computational cost. On simulated and real-world navigation benchmarks with dynamic obstacles, our method substantially improves navigation success while reducing collision rates through the predictive training signal alone, without additional inference-time parameters. Real-robot deployment on a Unitree Go2 demonstrates zero-shot sim-to-real transfer: the controller navigates cluttered indoor and dynamic outdoor environments without fine-tuning, with evasive behavior consistent with the collision reduction observed in simulation.
Read the full abstract

All authors Yancheng Zhu, Wanli Ma, Chen Han, Irvin Haozhe Zhan, Bingfeng Qin, Yixin Xu

Robotics

COLIP-2: Olfaction-Vision-Language Embeddings

Kordel Kade France

The Contrastive Olfaction-Language-Image Pre-training 2 (COLIP-2) model is a multimodal embeddings space that places olfaction as a first-class citizen among vision and language. Molecular structure, gas-sensor readings, odor-descriptor language, and images are all trained into a single shared representation space, so that a robot can localize a detected aroma to objects in a scene probabilistically. No ImageNet-scale datasets of paired image-scent examples exists which warrants the need for their collection. Our intent with the release of COLIP-2 is to demonstrate the limit of what can be built for robotics with open-sourced olfactory data in order to ground the argument for why new methodologies and datasets are necessary in order to enable advanced olfactory-oriented perception capabilities. We enumerate results from internal testing of the COLIP-2 architecture and make necessary optimizations to run the model at the edge for real-time robotics applications. While developed with robotics in mind, the design of COLIP-2 has been influenced by experts across many disciplines of science in academia and industry, and we hope that the model can be useful in any multimodal domain requiring olfactory intelligence.
Read the full abstract

Robotics

Finite-Time Curvature-Constrained Vector Field for Saturation-Free Motion Planning of Nonholonomic Robots

Zhouru Xiao, Sha Luo, Yang Lu et al. (+5 more)

Accurately steering a robot to a target configuration is fundamental in engineering, yet remains challenging for nonholonomic mobile robots. Vector fields (VFs) provide a natural framework by specifying desired motion directions throughout the workspace and enabling direct integration with feedback control. However, most existing VF-based methods cannot explicitly generate trajectories satisfying curvature constraints. Actuator limits are therefore often enforced by input saturation, which may invalidate stability guarantees and degrade closed-loop performance when not considered in controller design. In addition, these methods usually ensure only asymptotic convergence without an explicit settling-time bound. To address these issues, we propose a generalized motion planning and control framework consisting of a finite-time curvature-constrained vector field (FT-C2VF) and a saturation-free control law. Depending on the motion objective, the framework drives the robot to the target configuration in finite time or through it periodically. First, the FT-C2VF is constructed using complementary gains to achieve finite-time convergence while ensuring that the curvature of its integral curves is continuous, bounded, and monotonically decreasing with the radial ratio. Second, an almost globally C1-smooth, saturation-free controller is developed to track the FT-C2VF without Jacobian information, while keeping all control inputs within prescribed actuator limits. Third, dynamical-systems analysis establishes almost-global finite-time stability of the target equilibrium. Numerical simulations show improved performance over representative VF-based methods, and outdoor experiments on an Ackermann-steered vehicle confirm the effectiveness and robustness of the proposed approach.
Read the full abstract

All authors Zhouru Xiao, Sha Luo, Yang Lu, Héctor García de Marina, Zhenyang Xu, Chaosong Gong, Yaonan Wang, Weijia Yao

Robotics

Predicting Grasping Compliance in Robotic Hands through Analytical-Model-Informed Neural Networks

Qianwen Zhao and Long Wang

In robotic manipulation studies, grasping is often treated as a binary success or failure problem, usually defined by whether the object simply stays in the hand. For forceful tool use, however, this view is insufficient because grasp compliance becomes a critical factor governing how the hand and tool behave under load. Compliance arises from coupled kinematics, grasp configuration, passive mechanics, and contact conditions, producing nonlinear behavior in which deformation and interaction forces influence each other. Understanding this relationship is essential for predictive models of how a grasped tool and a compliant hand jointly respond to external loading. In underactuated hands, these effects are amplified: such designs offer low cost and adaptive grasping, but make compliance behavior more difficult to model and predict. Our goal is therefore to develop a predictive model for grasped tool behavior during forceful interactions. To address this challenge, we introduce an analytical model informed neural network (AMINN), a hybrid predictive model that combines an analytical mechanics layer with data driven learning to estimate grasp stability and in hand tool displacement under external loading. The model is evaluated on a three finger underactuated robotic hand and shows strong predictive capability with mechanically meaningful outputs across diverse loading conditions. Compared with a black box multilayer perceptron baseline, AMINN also achieves better energy based physical consistency. Beyond prediction accuracy alone, this framework advances physically interpretable learning for robotic manipulation and supports more reliable, safer, and more trustworthy autonomous tool use in safety critical settings during forceful interaction.
Read the full abstract

Robotics

GeoWorldAD: Geometry World Action Model for Autonomous Driving

Songyan Zhang, Jinyuan Tian, Hanbing Li et al. (+9 more)

Autonomous driving requires both safe and efficient planning decisions in dynamic 3D environments. Although recent Vision/Video-Action models learn policies directly from visual observations and scale well with advances in vision transformers and large-scale training data, they often lack explicit geometric grounding and future-aware spatial guidance, limiting their ability to balance collision avoidance and driving progress. In this work, we propose GeoWorldAD, a geometry world action model that grounds trajectory planning in ego-aligned 3D space and anticipates short-horizon scene evolution with latent future geometry tokens. Present geometry provides essential spatial constraints for safe planning, while future geometry reveals how surrounding agents and ego-centric free space may evolve, reducing overly conservative decisions without sacrificing safety. To efficiently exploit these geometric cues, GeoWorldAD progressively aggregates multi-scale present geometry and latent future geometry through iterative trajectory refinement. Experiments on NAVSIM v1 and v2 demonstrate state-of-the-art performance, highlighting the effectiveness of explicit 3D geometry grounding and future geometry world modeling for safe and efficient autonomous driving.
Read the full abstract

All authors Songyan Zhang, Jinyuan Tian, Hanbing Li, Daqi Liu, Hao Chen, Wenhui Huang, Fang Li, Guang Chen, Hangjun Ye, Long Chen, Kuiyuan Yang, Chen Lv

Robotics

Disturbance-Aware Flight for Aerial Robots in Narrow Space

Lei Qiang, Tianyu He, Chenyang Sun et al. (+3 more)

Autonomous flight of aerial robots in narrow space remains challenging due to strong aerodynamic disturbances and limited flying space. Existing approaches mainly address aerodynamic disturbances at the control level, while motion planning typically relies on geometric constraints and fixed speed limits, leading to conservative or unsafe behaviors in confined environments. This paper presents a disturbance-aware planning and control framework (DAPCF) that integrates online disturbance estimation into the planning-control loop for quadrotor flight in narrow space. First, the dual-loop observers estimate 6-degree-of-freedom disturbance forces and torques in real time based on odometry and motor speed measurements. Then, a disturbance risk function is introduced that adaptively modulates the reference speed of the planner based on disturbance estimation, reducing velocity when disturbances exceed a threshold and restoring it under low-disturbance conditions. Finally, a motor-dynamics-based nonlinear model predictive controller (MDNMPC) with disturbance compensation is designed to ensure robust trajectory tracking under perturbed conditions. Experiments demonstrate that a quadrotor with a diagonal length of 0.39~m can traverse straight, sloped, and curved tunnels as narrow as 0.6~m, outperforming human pilots in both success rate and flight efficiency.
Read the full abstract

All authors Lei Qiang, Tianyu He, Chenyang Sun, Xurui Liu, Miao Wang, Xiaobin Zhou

Robotics

Test-Time Scaling for World Action Models via Zero-Shot Geometric Evaluation

Zesen Zhao, Minkyoung Cho, Hui shen et al. (+4 more)

Test-time scaling improves foundation-model inference by spending additional computation, but robot control requires deciding whether extra compute is useful before executing an action. World Action Models (WAMs) make this decision natural: each rollout exposes both an action chunk and predicted future observations. We propose \methodgated, a training-free selective test-time scaling framework for WAMs. We first instantiate \method, a fixed-budget Best-of-$N$ selector that ranks sampled rollouts by cross-view depth reprojection consistency of their predicted futures, computed with a frozen geometry foundation model. \methodgated\ adds a lightweight action–future consistency gate that invokes \method\ only when the initial rollout appears internally inconsistent. Across five benchmark–backbone settings on RoboCasa, LIBERO Long, and RoboTwin~2.0, fixed-budget \method\ improves $N{=}8$ task success in every setting, e.g., raising the RoboCasa group average from $66.3\%$ to $68.4\%$ with Cosmos Policy and from $80.8\%$ to $82.5\%$ with X-WAM. With gating enabled, \methodgated\ recovers on average $74.8\%$ of the always-on success gain while triggering additional sampling on only $26.2\%$ of decision points. Offline diagnostics show that cross-view reprojection is a strong task-label-free selector, and we identify false low-score selections as a failure mode that helps explain why performance can saturate or degrade as $N$ increases.
Read the full abstract

All authors Zesen Zhao, Minkyoung Cho, Hui shen, Boyuan Zheng, Kunxiao Gao, Yulong Cao, Z.Morley Mao

Sunday 19 July

Robotics · Cross-listed from cs.AI

DeeperRadar: End-to-End MIMO Radar Design and Multi-Modal Fusion for Autonomous Vehicle Perception

Eli Goldenshluger, Barak Pinkovich and Chaim Baskin

DeeperRadar is a radar-centric, sensor-stack-conditioned framework that co-designs radar sensing and multi-modal 3D detection for autonomous mobility by learning a sparse acquisition pattern end-to-end with the fusion model. A learnable MIMO design module is trained end-to-end within a fusion network that operates directly on raw radar ADC data together with camera images and LiDAR point clouds. During training, the design module is supervised by the other sensors, enabling the system to learn both which receiver antennas to activate and the effective number of them. At deployment, the design module is removed and replaced by the learned sparse subsampling mask, leaving the downstream model architecture unchanged. Evaluated on the RADIal dataset, DeeperRadar discovers sparse, task-aware radar configurations that match or exceed full-array baselines while using fewer receivers, potentially reducing radar cost and integration complexity. These results show that learned optimal MIMO radar design depends on the fusion stack and the downstream perception task.
Read the full abstract

Robotics

Multi-Resolution Voxelized Map-Based Stereo Visual-Inertial Odometry

Shuyi Pan, Hangtian Wang, Zhaoxing Zhang et al. (+3 more)

Incorporating prior maps significantly enhances the accuracy and robustness of pose estimation in visual-inertial odometry (VIO). However, the large data volume of such maps, combined with limited transmission bandwidth, makes it impractical to continuously load local maps onto an edge device. In this paper, we propose a multi-resolution prior map construction method and a corresponding map-based VIO system. The prior map is voxelized at multiple resolutions, with each voxel retaining only a single map point. During online VIO operation, a cone-shaped indexing strategy associates 2D features on the edge device with 3D map points. The cone's intercept is determined by the distance from the current position to the 3D points, enabling the selection of the appropriate resolution level and the retrieval of the unique map point within the corresponding voxel via a 3D digital differential analyzer (DDA) algorithm. This approach minimizes both the volume of data required for transmission and the computational load during data association. Extensive experiments on two public datasets demonstrate that our system achieves accurate pose estimation while requiring minimal data transmission.
Read the full abstract

All authors Shuyi Pan, Hangtian Wang, Zhaoxing Zhang, Chengliang Zhang, Zikang Yuan, Xin Yang

Robotics · Cross-listed from cs.LG

Rethinking the Suitability of Reinforcement Learning Algorithms Under Practical Transfer Constraints

Hany Hamed, Abhishek Naik, Colin Bellinger et al. (+1 more)

Transfer-oriented reinforcement learning requires evaluating algorithms along dimensions that go beyond standard sample efficiency. We focus on two dimensions: practical efficiency, which asks whether conclusions about algorithm suitability change under wall-clock rather than interaction-based budgets, and robustness under dynamics mismatch, which asks how different learning paradigms respond to variability in the training distribution induced by domain randomization. We provide two insights to reinforcement-learning practitioners. First, comparing the sample efficiency of different algorithms is often an insufficient criterion in transfer-oriented settings. The wall-clock time required to train a decent policy is an important consideration for practitioners, and we find that the sample-inefficient PPO algorithm can produce a performant policy faster than relatively more sample-efficient algorithms such as SAC and TD-MPC2, validating the common understanding of massively parallel training paradigms. Second, domain randomization can help different kinds of algorithms learn robust policies. In particular, although PPO, SAC, and TD-MPC2 represent different RL paradigms - on-policy, off-policy, and model-based learning and planning, respectively - we find that domain randomization affects all three algorithms in a similar way. To the best of our knowledge, this is the first controlled comparison of the effect of domain-randomization coverage on PPO, SAC, and TD-MPC2 under the same transfer protocol. Taken together, these two insights highlight the importance of evaluating RL algorithms not only by sample efficiency, but also by practical considerations such as training time and the algorithms' ability to produce usable policies.
Read the full abstract

All authors Hany Hamed, Abhishek Naik, Colin Bellinger, A. Rupam Mahmood

Robotics

From Perception to Assistance: Open-Vocabulary Shared Autonomy for Robotic Manipulation

Murilo Vinicius da Silva, Ricardo V. Godoy, Juliano Negri et al. (+3 more)

Teleoperating a robotic manipulator in industrial environments demands precision that camera-based interfaces alone struggle to deliver. The operator must align the end-effector with a target in clutter, under limited depth perception, and without colliding with the surrounding structures. This paper presents a shared-autonomy framework that assists the operator throughout this process. A single RGB-D camera captures the operator's arm motion and hand gestures without wearables, fiducials, or a calibration stage. The intended target is specified by a free-form text prompt, grounded by a vision-language model in the robot's gripper camera, and tracked across its onboard cameras by a promptable video-segmentation model, resulting in a grasp frame continuously separated from the obstacle map. Every commanded motion is executed by a GPU-accelerated model-predictive controller that enforces self- and environment-collision avoidance against an online volumetric reconstruction, while a potential field corrects the operator's reference toward the grounded target during the final approach. An autonomous mode can be gesture-triggered to complete the grasp on the same target without a separate perception pipeline. The framework is validated on a quadruped mobile manipulator. The interface achieves a positional RMSE of 59 mm relative to motion-capture ground truth, and the controller keeps the arm at least 18 cm from obstacles while the operator deliberately commands the arm into them by 6 cm. In an industrial valve manipulation and a pick-and-place task, the full framework succeeded in all trials, while ablating either the collision or the assistance module produced failures through complementary mechanisms, and autonomous execution succeeded in four of five trials per task.
Read the full abstract

All authors Murilo Vinicius da Silva, Ricardo V. Godoy, Juliano Negri, Gustavo J. G. Lahr, Ranulfo Bezerra, Marcelo Becker

Robotics

Asynchronous Multimodal Diffusion Policy Composition via Latency-Aware Guidance Fusion

Zihao He, Hongjie Fang, Shirun Tang et al. (+2 more)

Diffusion policies have shown strong potential for robotic imitation learning, and recent extensions incorporate additional modalities to improve manipulation performance. However, these modalities often differ not only in information content but also in sensing rates and inference latencies. Existing multimodal diffusion policies typically rely on synchronous fusion or manually designed multi-frequency architectures, which either slow down high-frequency feedback or limit extensibility to new modality combinations. We propose LAG-Fusion, a latency-aware guidance fusion framework for asynchronous multimodal diffusion policy composition. LAG-Fusion allows modality-specific policies to operate at their native inference rates and contribute denoising guidance whenever available. To make asynchronous composition consistent, we derive a reference-frame rebasing rule for diffusion variables under relative action representations, enabling delayed guidance to be aligned before fusion. We instantiate LAG-Fusion in contact-rich manipulation by composing a low-frequency vision policy with a high-frequency force policy. Experiments under heterogeneous modality latencies show that LAG-Fusion improves policy responsiveness and task performance over synchronous fusion and specially designed force-aware baselines.
Read the full abstract

All authors Zihao He, Hongjie Fang, Shirun Tang, Cewu Lu, Haoshu Fang

Robotics

Retriever: Composing the Perception-Reasoning-Action Loop for Long-Horizon Manipulation

Linfeng Zhao, Haojie Huang, Jiayuan Mao et al. (+3 more)

Building long-horizon robot agents requires composing closed-loop pipelines – perception, belief update, planning, and control – whose components run at different clocks and with variable latency. Today, these systems are often assembled with ad-hoc concurrency and pub/sub conventions that make timing and input-consumption semantics implicit, yielding schedule-dependent behavior that is hard to reproduce, debug, and reuse. Current solutions typically solve parts of this problem at either the algorithmic or the systems layer, but not both. In this work, we propose Retriever, which spans the entire stack: an asynchronous decision model, a programming model, a runtime, and an example closed-loop agent pipeline. Retriever represents an agent as a graph of stateful causal stream functions executed on explicit run clocks. We formalize this view via an asynchronous environment-agent loop over continuous-time streams and show that finite-memory causal policies can be represented by compositions of these operators. Retriever compiles these graphs into a runtime that supports multiple backends, enabling systematic debugging across running environments and deterministic replay from logged asynchronous data. We evaluate Retriever through a real-robot case study together with controlled studies of runtime overhead and deterministic replay behavior.
Read the full abstract

All authors Linfeng Zhao, Haojie Huang, Jiayuan Mao, Weiyu Liu, Mykel Kochenderfer, Lawson L.S. Wong

Robotics

VIDAR: Visual-Inertial Dense Alignment and Reconstruction via a Geometric Foundation Model

Diyari Mohammed Salih, Lingxiang Hu, Naima AitOufroukh-Mammar et al. (+1 more)

Monocular foundation models provide dense geometry but usually lack a stable metric scale. This paper presents VIDAR, a visual-inertial dense reconstruction framework that couples SVO+IMU odometry with Depth Anything 3. VIDAR uses the visual-inertial front end as a metric anchor: it provides camera poses, scale, and a consistent world frame for aligning dense foundation-model predictions across time. The foundation model then contributes detailed local geometry that is fused into a global reconstruction. We study both pose-conditioned DA3 and a decoupled alignment strategy. On EuRoC, pose injection reduces scale error to about 1% and reaches 0.463 mean F@0.10; the decoupled hybrid improves this to 0.676 without ground-truth poses. Results on EuRoC and TUM RGB-D show that VIDAR is a practical route to metric dense monocular reconstruction.
Read the full abstract

All authors Diyari Mohammed Salih, Lingxiang Hu, Naima AitOufroukh-Mammar, Fabien Bonardi

Robotics

BoxTwin: Learning Elastoplastic Articulated Object Dynamics from Videos

Heng Zhang, Gehan Zheng, Kaifeng Zhang et al. (+6 more)

Digital twins enable robots to anticipate and adapt to physical interactions, but existing models struggle with elastoplastic articulated objects (EAOs) that exhibit nonlinear elasticity, plastic yielding, and damage accumulation. We present BoxTwin, an interactive digital twin framework that learns the full dynamics of EAOs from videos. Our pipeline reconstructs the scene, identifies a physics aware constitutive model for each EAO. Experiments on manual folding and dual arm manipulation of EAOs show that BoxTwin accurately tracks joint trajectories and reproduces post contact plastic behavior over long horizons. By integrating video driven reconstruction with elastoplastic damage modeling, BoxTwin advances digital twins toward predictive, adaptive control of deformable articulated objects in unstructured environments.
Read the full abstract

All authors Heng Zhang, Gehan Zheng, Kaifeng Zhang, Jay Song, Shivansh Patel, Sonny Hu, Yunzhu Li, Changxi Zheng, Peter Yichen Chen

Robotics

Move First, Commit Later: Selective LiDAR-to-BIM Global Initialization by Verifying Proposals Against Competing Explanations

Yujie Zhang, Yuxuan Guo, Zeheng Fan et al. (+3 more)

Global LiDAR-to-BIM initialization must place a robot within an as-designed building model without a prior pose. In repetitive interiors, the principal failure mode is not low-confidence registration but confident aliasing: a submap can match several BIM regions with comparable scores, producing a high-scoring pose displaced by symmetry. We present Move First, Commit Later, a selective layer that treats a registration front-end as an evidence source and decides whether to commit. Candidates from multiple submaps are mapped to a common $\mathrm{SE}(2)$ anchor; a top-1 consensus $B_m$, invariant to non-champion multiplicity, aggregates cross-submap evidence; and topology serves only as a binary feasibility gate. The decision is typed–COMMIT, DEFER, or AMBIGUOUS($\tau$), reporting the detected symmetry period–and reversible: symmetry-breaking motion upgrades AMBIGUOUS to COMMIT. On a real multi-room building and a controlled symmetric simulation, the layer commits correctly in every tested trajectory-scale configuration and otherwise abstains with a typed state, whereas forced-choice policies on the same front-end select wrong rooms in most cases. Committed anchors are within 0.02–0.36 m of an independent laser-tracker position reference and within $1.9^\circ$ of a BIM-registration orientation proxy. The evaluation covers one building and one front-end; the layer is designed to be front-end modular.
Read the full abstract

All authors Yujie Zhang, Yuxuan Guo, Zeheng Fan, Jinyue Liu, Xiaohui Jia, Guang Yang

Robotics

DROID-ANCHOR: Odometry-Anchored Recurrent Metric Depth Estimation

Yuxuan Chen and Brook Du

Precise metric depth estimation is fundamental for autonomous robot navigation, yet monocular systems inherently suffer from scale ambiguity and scale drift. While recent recurrent flow-based SLAM systems have demonstrated state-of-the-art robustness, they remain scale-ambiguous. In this paper, we propose Metric-DROID, an end-to-end recurrent architecture that anchors visual SLAM to physical reality by integrating proprioceptive odometry. Our framework introduces the following innovations: (1) A LSTM Update Operator that encodes high-frequency odometry sequences into spatial feature maps, providing a persistent metric bias for iterative refinement. (2) An Uncertainty-Aware Metric Backend ($BA_{odom}$) that treats odometry as a geometric anchor with learned heteroscedastic covariance. By regressing a time-varying metric uncertainty $\Sigma_{o}$, our system intelligently balances visual re-projection and metric translation residuals, effectively mitigating the impact of wheel-slip and sensor noise. (3) We further propose a selective residual fine-tuning strategy to preserve pre-trained geometric priors while enabling zero-shot metric alignment.
Read the full abstract

Robotics

SHAPE: Simultaneous Water Hydraulic Actuation and Position Estimation of a Sensorless Remote Actuator through a Thin and Long Flexible Tube

Yuki Nakamura, Shuto Yoshimura, Tomoyuki Noda et al. (+1 more)

Robot sensors and electronic equipment are prone to failure in harsh environments. With water hydraulic drive, thin and long tubes enable remote operation without actuator-side sensors. Furthermore, the elasticity of the tubes reduces the impedance of the joints (actuators), benefiting robot tasks involving unexpected contact with the environment or vibrations. However, owing to the low impedance and limited camera visibility, accurately positioning the joint (or end effector) to the target location under varying load conditions is challenging. This study proposes a novel method that employs water-filled flexible tubes to enable the transmission of driving power and actuator-side information to and from the actuator, respectively, without actuator-side sensors. By modeling volumetric loss during transmission based on pressure fluctuations and incorporating minor air entrapment, simultaneous power transmission and position estimation is achieved through a tube up to 50 m. Thus, it becomes possible to use a feedback control framework that was previously difficult to implement in sensorless systems. Experimental validation confirms stable position control of a sensorless water hydraulic cylinder under varying loads. Furthermore, a field parameter-identification method accounts for tube and air entrainment variability without requiring actuator-side sensors. These contributions promote reliable remote control of robots in harsh environments.
Read the full abstract

All authors Yuki Nakamura, Shuto Yoshimura, Tomoyuki Noda, Yoshihiro Nakata

Robotics

Articulated Humanoid Head for a Robot Receptionist Capable of Natural Human Interaction

Tharusha Fonseka, Charuka Bandara, Moshintha Hewavitharana et al. (+4 more)

Humanoid robots have become increasingly popular in applications such as social interaction, education, and service roles, which drives the need for more natural and efficient human-robot interactions. However, currently available humanoid heads often face limitations, including high costs, mechanical complexity, and limited adaptability across diverse environments. To address these challenges, we present an articulated humanoid robot head designed for a receptionist role, integrating a mechanical structure with 21 degrees of freedom (DoF), including mechanisms for the mouth, eyes, eyebrows, and neck, and covered with realistic silicone skin to achieve a human-like appearance and expression. The system integrates a model-based architecture that combines SCRFD, ArcFace, and ByTetrack for face recognition and Llama and Whisper for natural language processing, with hardware support enabling real-time operations and human re-identification. The conversational ability and re-identification capabilities of the humanoid robot head were quantitatively measured, while its emotional expressiveness and human likeness were evaluated through a user study, achieving an average human likeness score of 4.13 out of 5.
Read the full abstract

All authors Tharusha Fonseka, Charuka Bandara, Moshintha Hewavitharana, Melisa Arukgoda, Wageesha N. Manamperi, Udaya S. K. Perera Miriya Thanthrige, Peshala Jayasekara

Robotics · Cross-listed from eess.SY

Optimal Safety Control using High-Order Control Barrier Functions

Neng Li, Zuodong Pan, Jiaxing Wang et al. (+2 more)

This paper investigates the optimal safety control problem of nonlinear control systems by proposing novel high-order control barrier functions (HOCBFs). Different from zeroing HOCBFs, two novel HOCBFs are derived and the safety controllers are designed in an explicit way. Next, we implement vector Lyapunov function approach to propose a novel high-order control Lyapunov function (HOCLF) for the stabilization control problem. The relations between the proposed and existing HOCBFs are discussed. Afterwards, the compatibility of the proposed HOCLF and HOCBF is addressed to guarantee the stabilization and safety control objectives simultaneously, and thus the optimal controller is established. Finally, a numerical example from the navigation problem of quadrotors is presented to illustrate the efficacy of the derived results.
Read the full abstract

All authors Neng Li, Zuodong Pan, Jiaxing Wang, Weiguo Xia, Wei Ren

Saturday 18 July

Robotics

Information-Based Trajectory Planning for Spacecraft-to-Spacecraft Tracking and Navigation in Cislunar Space

Trevor N. Wolf, Brandon A. Jones and Jay W. McMahon

We present a trajectory planning method that balances information collection and control effort to improve cislunar spacecraft-to-spacecraft absolute tracking. Expanding use of cislunar space requires alternative navigation and tracking procedures that minimize reliance on ground-based support. Among efforts to address this need, spacecraft-to-spacecraft tracking exploits nonlinear dynamical tracers encoded in a series of relative measurements to infer absolute states of both an observer and a target. The geometry between spacecraft operating under this mode can significantly influence tracking performance. This work considers this geometrical impact by designing observer trajectories that jointly balance control effort and an information-theoretic quantification of the expected spacecraft-to-spacecraft tracking performance. Our methods are designed for multiple low-thrust observation platforms of various sensing modalities and can incorporate multiple space object targets in planning. By leveraging information gain in the optimal control problem, we report almost an order of magnitude improvement in the expected navigation and tracking errors for an optical observer operating in a Distant Retrograde Orbit (DRO). This work demonstrates the feasibility and value of information-optimal low-thrust spacecraft trajectory design for current and upcoming cislunar missions.
Read the full abstract

Robotics · Cross-listed from cs.CV

Hazard or Anomaly? Evaluating VLMs for Understanding Dangers and Discrepancies

Murali Indukuri, Mohammad Eskandari, Sree Nitya Kollu et al. (+2 more)

Modern safety-critical systems increasingly rely on human-robot interaction to reduce disaster risk and support decision-making during emergencies. Vision-Language Models (VLMs) are promising for these settings because they can interpret complex scenes and communicate safety-relevant information, but they still require careful evaluation to ensure reliable safety reasoning. In particular, current evaluations often frame danger recognition as a binary decision (Safe/Unsafe), making it unclear whether a model is identifying true physical hazards or merely reacting to unusual scene elements. We address this limitation by introducing an explicit distinction between hazard and anomaly, and by separately recognizing hazardous and anomalous states. We evaluate several state-of-the-art VLMs across two datasets and multiple prompting strategies to test whether this distinction changes model behavior. Our results show that VLMs frequently misinterpret anomalousness as hazardousness, revealing an over-reliance on contextual irregularity as a proxy for danger. We further show that explicitly separating anomaly from hazard provides a more informative evaluation of VLM safety reasoning and exposes failure modes that binary safety judgments can obscure. Our public dataset is available on Roboflow https://app.roboflow.com/vlm-in-context-anomaly-and-hazard-detection/camera-ready-roman-ds.
Read the full abstract

All authors Murali Indukuri, Mohammad Eskandari, Sree Nitya Kollu, Stephanie Lukin, Cynthia Matuszek