Papers

We present an improvement on previous spacecraft pose estimation architectures that results in the lowest published mean rotation errors we know of on the SPEED+ lightbox and sunlamp test sets for a known, non-cooperative spacecraft. By using a previously established heatmap-based pose estimation architecture and adapting a large self-supervised ViT foundation model (DINOv3) in place of the smaller convolutional and ViT encoders of previous work, we show that pose estimation accuracy improves from 300M to 840M parameters with no saturation yet observed. We also evaluate our 840M model on a Jetson Orin NX 16GB, measuring single-pass network inference at 133.8 ms per crop with a board draw of 32.0 W. These measurements demonstrate embedded inference feasibility on a processor family with orbital flight heritage. Our resulting model outperforms previous models across lightbox and sunlamp domains while training only on synthetic data. Our best model, using DINOv3 840M adapted with LoRA as the encoder (rank 64, three-seed ensemble with four-rotation test-time augmentation), results in $1.56^\circ$ mean rotation error on sunlamp and $1.17^\circ$ on lightbox, compared to the previous best mean rotation errors we know of on these test sets, $2.66^\circ$ and $1.75^\circ$ by EagerNet.

Individual tree crown segmentation from aerial imagery underpins tree-level carbon accounting, biodiversity, and restoration monitoring at landscape scale. However, existing models are predominantly trained on dense canopy forest imagery and degrade in savannah and drylands, where tree crowns are sparse, of variable appearance, and underrepresented in annotated benchmarks. These models also typically depend on costly polygon annotations. We introduce LACE (LAtent Commonality Expectation-maximisation), a box-supervised instance segmentation model, evaluated on 0.1 m/px aerial RGB tree crown imagery. LACE uses a frozen DINOv3-web ViT-L/16 encoder, applied at four spatial offsets and interlaced into a denser feature grid, with a lightweight CenterNet-style detection head trained solely on bounding boxes. We use expectation-maximisation to separate recurring appearance, the "treeness", within bounding boxes from surroundings. On the OAM-TCD benchmark test set, LACE reaches a mask AP$_{50}$ of $0.663 \pm 0.001$ (3 seeds) trained on 900 box-annotated images and without mask annotations, above the 0.626 scored by Restor's released mask-supervised Mask R-CNN, which was trained on the full ~4.2k image set. On a sparse-canopy holdout set, mask AP$_{50}$ rises to $0.691$ versus $0.612$ for Detectree2, a mask-supervised baseline. On NeonTreeEvaluation, using the official evaluation code, LACE reaches $0.728 \pm 0.003$ F1@0.4 (5 seeds) from 23,424 hand-annotated RGB boxes alone, matching the authors' DeepForest model's published 0.719, using under 0.1% of its training annotations and none of its LiDAR-derived 30M-crown pretraining set. By leveraging frozen self-supervised features, LACE matches or surpasses fully-supervised specialist baselines from boxes alone, removing the need for polygon annotation in tree crown instance segmentation for sparse-canopy environments where labelled data is scarce.

These notes develop the mathematical foundations and construction of a Fourier-Bessel wavelet family inspired by the disk harmonics of Shaqfa et al.[9]. We begin with the relevant properties of Bessel and modified Bessel functions and introduce the wavelet properties required for the construction. We then derive the Fourier-Bessel disk harmonics as solutions to the Helmholtz equation on the unit disk subject to a Neumann boundary condition. Building on this basis, we construct a wavelet family by applying a Gaussian spatial envelope and introducing a zero-mean correction for the zeroth angular order. We derive the corresponding normalisation constants for $L^2$-based applications and discuss $L^1$-based normalisation for frequency-domain peak consistency. Finally, we derive a closed-form Fourier-domain representation of the resulting wavelets. The main motivation is the approximately linear spacing, which converges to $\pi$ between consecutive radial eigenvalues. Rather than replacing the conventional dyadic organisation of wavelet families, this construction lays out the foundation to explore whether a more uniform radial frequency allocation can be useful for applications in which broad and balanced frequency coverage is desirable.

Multimodal language models traditionally rely on dedicated perceptual encoders to construct task-usable representations. More integrated architectures have recently emerged, which instead expose the shared transformer to lightly projected patches, audio frames, or discrete visual tokens. Where does this encoding happen when such representations are not provided? We find that the transformer can internalize this missing computation, constructing task-usable perceptual representations within its own early-to-middle layers before the downstream language model. We call this computational structure a Virtual Encoder. Across linear probing, similarities to perceptual encoders, and causal analyses, we identify signatures of this structure in models that receive perceptual tokens without continuous encoder-derived features. These analyses also suggest that the boundary between perception and language processing need not coincide within an architectural module. Instead, encoder-like computation can emerge as a functional regime within a shared transformer, providing a new perspective for understanding where and how multimodal models process perception.

Convolutional neural networks (CNNs) and vision transformers are both used to model the human visual system, but whether the two architectures diverge at a specific point in network depth is unclear. We compared six CNNs and two vision transformers by computing the Pearson correlation (r) between each model's predicted and measured EEG response at every layer or block, in ten participants viewing 200 natural images. For the transformer models, we also tested four token representations, from the classification (CLS) token alone to CLS combined with all patch tokens. CNNs showed strongest correspondence at the earliest layers, weakening at deeper layers, particularly later in the post-stimulus response. Transformers instead sustained strong correspondence at their deepest blocks, though not at their earliest ones. This advantage depended on token representation: pooled representations gave weaker peak correlations (r approx 0.48-0.51) than representations retaining all patch tokens (r=0.640 for CLIP-ViT-B/32, r=0.656 for DINOv2-ViT-B/14). Controlled comparisons showed architecture, not training objective, drove this effect: MoCo-v1 and ResNet-50 (matched architecture) performed nearly identically (r=0.673, 0.670), whereas CLIP-RN50 and CLIP-ViT-B/32 (matched objective) diverged until patch tokens were preserved. We propose that CNN training's classification bottleneck compresses brain-relevant information at depth, unlike transformers' self-attention and non-classification objectives. A spatial topography analysis showed a common occipital-dominant pattern across all models, indicating these differences reflect signal strength and persistence rather than distinct brain regions. Patch-preserving transformer representations sustain brain-predictive correspondence where CNNs collapse.

Retraining visual perception pipelines in High-Mix, Low-Volume (HMLV) automotive manufacturing must be carried out under tight annotation, energy, and time budgets, yet most Synthetic Data Generation (SDG) strategies still operate in the thousands of images. This work evaluates Semantically-Guided Domain Randomization (S-GDR), an annotation-free adaptation pipeline that couples Vision-Language Model (VLM)-based semantic captioning of a small unannotated real reference set with diffusion-based background synthesis (Stable Diffusion XL (SDXL) conditioned by ControlNet and IP-Adapter) and mask-based object composition. On an automotive multi-object detection benchmark and with a fixed budget of 200 synthetic training images, S-GDR reaches mAP50-95 = 0.739 on a real held-out test set, outperforming a domain-randomized render baseline (mAP50-95 = 0.697) as well as brightness filtering, perceptual hashing, CycleGAN style transfer, and unguided diffusion variants sharing the same 200-image budget. These initial observations position S-GDR as a promising annotation- free alternative for extreme data-scarcity regimes.

Radiomics provides quantitative descriptions of tumour appearance that may complement disease-specific foundation models in small labelled cohorts. We investigate this complementarity for computed tomography-based classification of clear cell renal cell carcinoma. Our framework uses radiomics to modulate RenalCLIP features through feature-wise linear modulation (FiLM), while retaining a direct radiomics contribution. Internal testing and external validation compare it with conventional fusion strategies and reference classifiers. The FiLM model achieves an area under the receiver operating characteristic curve (AUC) of 0.804 internally and 0.854 externally, with the highest mean AUC among the evaluated RenalCLIP fusion strategies in both cohorts. Pathway ablations examine the contributions of conditional modulation and the direct radiomics residual, while feature permutation highlights the role of tumour texture. These findings support radiomics as a useful complement to RenalCLIP in a small labelled cohort and identify FiLM as an effective approach to integrating their representations for robust renal tumour classification.

Training-free visual-token pruning often uses token importance, redundancy, or related selection criteria as proxies for safe removal. We show that these signals alone do not fully characterize removability, which is conditioned on both representation depth and the surrounding deletion set. Controlled interventions demonstrate that removing the same tokens at different depths produces substantially different downstream perturbations, while changing only the deletion context at a fixed depth alters candidate marginals and pruning-boundary decisions. These findings show that token importance alone cannot determine when a token is safely removable or how its removability changes under joint deletion. Motivated by this perspective, we propose CoRePrune, a training-free two-stage framework. Progressive Perturbation-Aware Visual Pruning refreshes deletion effects as visual representations evolve, while Set-Conditioned Refinement reevaluates candidate rescue benefits under the current deletion set after visual–text interaction. Across five multimodal large language model backbones covering standard images, high-resolution inputs, and video, CoRePrune preserves performance under aggressive token budgets. On Qwen3.5, with a final budget of 128 visual tokens, it retains 90.3% of dense-model performance while reducing aggregate prefill time by 51.0%.

Scattered light is common in biomedical images, yet its removal remains challenging. The difficulty arises from three aspects: first, aligned scattered-light-free biomedical ground truth is often unavailable; second, scattering is coupled with weak illumination and sensor-induced noise; and third, many learning-based restoration models are computationally expensive for embedded devices in Internet of Medical Things (IoMT) scenarios. To address these issues, this paper proposes PP-Net, a hybrid physical-prior neural network for biomedical scattered light removal. The proposed method consists of three components: DFN-Net suppresses sensor-induced noise, ASAP estimates the scattering map and recovers a physics-based prior map, and GF-Net refines the prior map by fusing it with the denoised observation. To reduce the dependence on paired biomedical ground truth, a progressive synthetic training and cross-domain transfer strategy is developed. Experiments show that the physical-prior branch improves the peak signal-to-noise ratio (PSNR) by up to 1.26 dB on paired synthetic benchmarks. Under joint noise-and-scattering degradation, PP-Net improves PSNR by more than 10.8 dB and the structural similarity index measure (SSIM) by more than 0.62 compared with representative baseline methods. On real W2S biomedical images, the proposed method reduces the average Natural Image Quality Evaluator (NIQE) score by 43.3%. Edge deployment with RKNN conversion and INT8 quantization achieves an average inference latency of approximately 200 ms per $512\times512$ image over 360 test images. These results demonstrate that PP-Net provides an effective and deployable solution for microscopic imaging, endoscopic inspection, and edge-assisted biomedical analysis in IoMT scenarios.

Accurate preoperative subtype classification of renal cell carcinoma (RCC) from contrast-enhanced computed tomography remains clinically challenging. Radiomics provides structured tumour descriptors, whereas foundation representations offer transferable image features. However, it remains unclear whether radiomics still adds value beyond pretrained representations, and how 2D and 3D MedVAE encoders compare in this setting. We compared handcrafted radiomics, 2D MedVAE, 3D MedVAE, and their fusion for binary clear-cell RCC versus non-clear-cell RCC classification on KiTS23 under a unified preprocessing pipeline. Concatenation, cross-attention, and gated fusion were evaluated as representative integration strategies, and radiomics feature importance was analysed to support decision-centric interpretability. Fusion consistently improved discrimination over image-only MedVAE branches. The best overall performance was achieved by 3D gated fusion, with an AUC of 82.7%, outperforming the best 2D fusion model (79.6%), the radiomics baseline (74.4%), and the single-modality MedVAE branches. Ablation analysis further showed clear gains of the full fusion model over both image-only and radiomics-only variants, indicating complementary contributions from radiomics and image representations. These findings suggest that radiomics remains relevant for RCC CT classification in the presence of foundation representations, and that its integration with MedVAE is more effective in the 3D setting. More broadly, the study supports a complementary role for radiomics and foundation representations in clinically meaningful imaging decision support.

We introduce CoDeR, a new paradigm for world modeling. Unlike existing video world models that implicitly represent world dynamics through visual observations, our system explicitly constructs an executable world with code and employs video generation models for visual realization. Specifically, we coordinate five complementary roles to translate high-level concepts into structured world rules, executable dynamics, and perceptual observations. This design enables long-term memory, open-ended interactions, autonomous world evolution, and multi-agent scenarios, where multiple entities can act, interact, and evolve persistently beyond the current observation. Extensive experiments demonstrate that our framework substantially extends the capabilities of existing world models, enabling long-term memory, open-ended interactions, autonomous evolution, and persistent multi-agent dynamics, while achieving state-of-the-art performance across multiple evaluation settings. Code and model weights will be made publicly available. Project Page: \href{https://becauseimbatman0.github.io/CoDeR}{CoDeR}.

Recent advances in Artificial Intelligence (AI)-powered Computer-Aided Diagnosis (CAD) systems have substantially improved breast cancer screening, diagnosis, and prognosis. Comparatively, postradiotherapy outcome prediction using paired longitudinal mammograms has received considerably less attention. This is largely due to the limited availability of well-annotated longitudinal datasets. Longitudinal mammograms, coupled with paired pre- and post-treatment information, provide a unique opportunity to characterize treatment-induced breast tissue changes following radiotherapy. The resulting learned representations can serve as a valuable asset for advancing personalized radiotherapy planning and post-treatment management. In this context, we propose Mammo-LIFE, a patient-level multimodal framework for post-radiotherapy outcome prediction that combines longitudinal mammographic features with patient-level clinical variables. The imaging branch processes paired pre- and post-treatment mammograms acquired from the four standard views using a mammography-specific encoder adapted via Low-Rank Adaptation (LoRA). Within each view, preand post-treatment representations are explicitly compared through a longitudinal comparison module to capture treatment-related changes. The resulting view-level embeddings are then aggregated using learned view-attention pooling to form a unified patient-level mammographic representation. Selected clinical variables are subsequently combined with the image-derived prediction probability through a late-fusion strategy. To evaluate the effectiveness of combining paired longitudinal mammograms with clinical information, experiments were conducted on an in-house clinical cohort using patient-level stratified five-fold cross-validation.

Dataset distillation (DD) compresses a large training set into a compact synthetic set while preserving downstream training utility. Although DD has been widely studied for images and recently extended to time-series forecasting, its application to human motion prediction remains largely unexplored. Human motion is high-dimensional and structurally coupled, and gradient matching (GM) in the original motion space optimizes many correlated variables without a prior on pose plausibility or temporal dynamics, which frequently yields implausible and unstable synthetic motions. To address this limitation, we propose a latent DD framework that regularizes distillation with a learned motion prior. Motions are first compressed by a residual-quantized variational autoencoder (RVQ-VAE), and distillation then updates only a learnable latent bank through the frozen quantizer and decoder. The pretrained decoder restricts synthetic motions to its output space, while residual quantization progressively refines the latent approximation across multiple codebooks and alleviates the representational bottleneck of single-stage vector quantization. Experiments on Human3.6M, CMU, and 3DPW with two prediction backbones show that the proposed framework outperforms direct GM in 27 of 30 evaluated settings and random subsets in every setting, and produces visibly more plausible synthetic motions in qualitative comparisons.

Video world models achieve long-range temporal consistency by storing KV cache during generation, but the growing cache makes KV cache memory a major deployment bottleneck, which motivates low-bit quantization study for efficiency. Existing 2-bit KV cache quantization methods can achieve nearly lossless performance on VBench, however, when applied to video world models, we find they still cause severe temporal flickering and visual degradation. Meanwhile, deeper investigates show that Key quantization produces smaller reconstruction errors than Value, but surprisingly leads to larger output degradation. We trace this discrepancy to attention in video world models: Key perturbations can change the attention logits, and shift the temporal-spatial tokens selected by Queries. These observations motivate us to preserve attention logits and temporal-spatial token selection during KV cache quantization. To address this issue, we present QuantWM, a training-free 2-bit KV cache quantization framework for video world models. QuantWM introduces two complementary techniques to mitigate the attention shifts. Firstly, quantization-sensitivity-aware clustering (QSAC) jointly considers historical Query sensitivity and residual ranges to select INT2-friendly Key centroids, which reduces quantization errors in channels that are more critical to attention. In addition, principal-subspace attention compensation (PSAC) restores the remaining Key errors along the dominant Query subspace using low-rank projections, which provides a direct and efficient correction to stabilize attention logits. Experiments on LingBot-World-v2, HY-World 1.5, Matrix-Game-2, Longcat-Video and Causal-Forcing demonstrate that QuantWM significantly improves visual quality and temporal consistency, while outperforming existing methods across benchmarks with up to 6.20 KV cache memory compression and limited additional overhead.

Text-to-motion models generate plausible human motion but do not model a robot's dynamics; whole-body tracking controllers execute robot references reliably but cannot replan an infeasible one. Recent language-to-humanoid systems bridge this gap by training. We measure how much of the gap closes with no training at all, by putting the deployment controller itself in the loop. Sample-simulate-select (S$^3$) draws $N$ motions per prompt from a frozen text-to-motion model, retargets each to a Unitree G1 by direction-matching inverse kinematics, rolls all of them out under full rigid-body dynamics with the pretrained SONIC tracking policy, and keeps the candidate the policy executed best. Because the verifier is the deterministic simulator itself, S$^3$ attains the any-of-$N$ ceiling by construction; what we measure is where that ceiling lies and what falls short of it. On 200 stratified HumanML3D test prompts with $N=8$, upright execution rises from 83.5% to 89.5% and hardware-gate passes from 33 to 85; on the complete test split (4,184 prompts) it rises from 80.5% to 89.5%. A kinematic verifier that predicts falls well (AUROC 0.90) recovers only a quarter of this gain: ranking a prompt's own candidates is harder than classifying the population. What selection cannot fix is one class, prompts that lower the pelvis, which a generator trained on retargeted robot data does execute. We further score the semantic fidelity of the executed motion with the standard text-motion evaluator, with a real-mocap control that attributes the loss to the robot projection, ablate the retargeter against GMR (complementary failures: the any-of-8 ceiling rises to 95.0% over both), and execute all 177 gate-selected clips on the real G1: every one completes standing, with hardware tracking error matching simulation ($r=0.94$).

Successful mobile manipulation requires coordinated base and arm motion while maintaining accurate spatial positioning. However, demonstration-trained policies can struggle to realise the intended base motion reliably, leading to spatial misalignment and subsequent manipulation failures. We present MAVP (Map-Aware Visuomotor Policies), a framework that improves execution reliability by predicting explicit base-pose targets and tracking them using localisation feedback. MAVP reconstructs a static map from teleoperated demonstrations and expresses demonstrated base trajectories in a shared map frame, providing consistent spatial supervision across demonstrations. At execution time, the policy receives RGB observations, joint states, and the robot's current map-frame base pose, and jointly predicts target base poses, arm actions, and gripper actions. A low-level controller tracks the predicted base targets using feedforward motion and pose error feedback, enabling correction of execution deviations. We additionally use pose-noise augmentation during training to improve robustness to errors in the policy's pose input. Across six real-world manipulation tasks and three policy families, MAVP achieves higher task success rates than unanchored velocity control in all tasks. Videos and additional results are available at https://123qwedsa123.github.io/mavp/.

Commercial image editing requires product identity preservation, accurate text rendering, and user appeal alongside general editing quality. We present KwaiMind, an image editing system combining general capabilities with e-commerce specialization. An agent-based data engine maintains approximately 1.8 million high-quality editing pairs. Built on a multimodal diffusion transformer, KwaiMind undergoes continued pre-training and supervised fine-tuning, followed by preference optimization and online reinforcement learning. A general-purpose vision-language judge and specialized rewards for click-through rate (CTR), text rendering, and product consistency guide specialized policies, which are consolidated through on-policy distillation. We introduce Ecom-Bench, covering 11 commercial editing tasks with task-specific visual evaluation and CTR-based ranking. KwaiMind achieves the strongest overall scores among evaluated open-source editors on ImgEdit, GEdit, both language splits of REDEdit, and Ecom-Bench visual quality, and the highest aggregate CTR ranking score among compared systems. Offline, CTR-guided optimization increases the proportion of generated images whose predicted CTR exceeds that of the original product image from 12.16% to 37.41%. In an online A/B experiment, CTR-based selection of product main images yields an approximately 2.44% relative increase in actual CTR. These results demonstrate the value of domain-specific data and reward-driven alignment for commercial image editing.

The dimensional collapse of representations in self-supervised contrastive learning is an ever-present issue. One notable technique to prevent such a collapse of representations is using a multi-layered perceptron network called Projector. In several works, the projector has been found to heavily influence the quality of representations learned in a self-supervised contrastive pre-training task. However, the question still lingers. What role does the projector play? Assuming the projector mitigates dimensional collapse, what prevents the terminal layer of the base encoder from functioning as the projector in the absence of an explicit multi-layer perceptron (MLP) head? In this work, we intend to study what happens inside the projector by examining the rank dynamics of the same and the encoder through empirical study and analysis. Through mathematical analysis, we observe that the effect of rank reduction predominantly occurs in the last layer. Motivated by this insight, we propose a weight regularization strategy applied specifically to the last layer. We demonstrate that this targeted approach yields better performance than applying orthogonal weight regularization across the entire network (WeRank), both with and without a projector. Our method improves Top-1 accuracy by more than 1% on SimCLR on the ImageNet100 dataset and consistently outperforms baseline SimCLR variants on CIFAR datasets, supporting our interpretation of the projector's role.

Camera-based 3D object detection and online vectorized HD mapping provide compact scene representations for autonomous driving, but both depend on accurate metric geometry and remain limited by depth ambiguity. Over long-term deployment, observations from repeated traversals can be accumulated into persistent point cloud priors that provide geometric context beyond the current observations. Existing explicit point cloud prior approaches, however, rely on LiDAR-based map construction and therefore require expensive 3D ranging sensors. We propose a framework that constructs a static point cloud prior map from previous camera traversals using Pi3X and augments each point with DINOv3 features. At runtime, a local prior patch is retrieved using global localization, encoded with a sparse voxel backbone, and fused in bird's-eye view (BEV) with lifted multi-view camera features. Task-specific sparse transformer heads then predict 3D objects and vectorized map elements from the fused representation. On Argoverse 2, the vision-based prior improves a strong baseline from 0.287 to 0.299 CDS and from 0.669 to 0.750 vectorized mapping mAP. Ablations show that semantic DINOv3 features are particularly important for vectorized mapping. These results demonstrate that vision-built geometric-semantic priors provide an effective form of long-term scene memory for camera-based perception, improving both tasks without LiDAR for prior-map construction or online inference.

Orchard robots need maps that preserve small but semantically important structures such as trunks, trellises, and fruit. 3D Gaussian Splatting (3DGS) SLAM achieves high photometric fidelity. However, its optimization remains appearance-driven, and transferring image semantics to 3D points is unreliable for thin structures, whose pixels may receive depth from background surfaces. We present ArborSplat, an online semantic 3DGS SLAM system that tracks with LiDAR odometry and optimizes semantics directly on the Gaussian map, constrained by class-specific height bands above a ground plane fitted to each keyframe's stereo point cloud, and fuses multi-view evidence into a semantic point cloud online while rejecting labels inconsistent with the local ground surface or with monocular depth. Class-constrained refinement reserves Gaussian capacity for underrepresented structures and, under reduced budgets, increases training-view accuracy on tree classes. We evaluate the approach on apple and pear orchards during dormancy, flowering, and harvesting. On full routes, it keeps ATE below 0.5 m on all 12 traversals. On shared 301-frame segments, it exceeds SGS-SLAM and GS3LAM by 0.23 to 0.50 training-view and 0.15 to 0.36 held-out mIoU while running 1.7 to 7.5 times faster, whereas SemGauss-SLAM runs out of GPU memory on all six.

Existing latent world models are typically optimized for future predictability, yet the resulting representations are not necessarily useful for planning in autonomous driving. Predictions are commonly used for pretraining or auxiliary supervision rather than as direct conditioning signals for trajectory generation. We propose ForeDrive, which learns a planning-relevant latent representation and couples it asymmetrically to a Diffusion Transformer (DiT) planner. The planner consumes multi-horizon latent future representations learned with a JEPA-style world model; planning gradients update the shared online encoder, while stop-gradient routing trains the latent predictor with forecasting losses only. Because predicted futures have varying reliability across horizons and BEV trajectories are misaligned with image tokens, we use gated visual fusion, future-status injection, and Trajectory-Adaptive Bias (TAB) to inject future latents as guidance without overriding the current observation. Trained with pure imitation learning and using only the current front-view image as visual input at inference, ForeDrive attains 89.9 PDMS on NAVSIM v1 and 90.0 one-stage EPDMS on NAVSIM v2, without reinforcement learning or an external trajectory scorer.

Point cloud generation has emerged as a crucial task for accurately capturing and reproducing the complexity of the physical world. However, existing generative approaches, predominantly relying on Transformers and Variational Autoencoders (VAEs), frequently ignore the continuous, non-grid topologies inherent to 3D spaces. Although the integration of graph-based structures has yielded significant benefits in related discriminative vision tasks, such geometric architectures remain noticeably absent from 3D generative modeling. To address this gap, we introduce EMERGE (Equivariant Multi-scale GNN for Resolution-agnostic point cloud GEneration), the first fully $SE(3)$-equivariant graph-based diffusion backbone explicitly designed to generate point clouds while preserving continuous spatial symmetries. Our framework bypasses the rigid resolution dependencies of standard generative pipelines, enabling zero-shot inference at multiple, arbitrary spatial resolutions. Extensive empirical evaluations demonstrate that EMERGE achieves State-of-the-Art generation quality across standard metrics, while the strong inherent geometric inductive biases enable significantly faster training convergence compared to existing baseline methods.

Saliency maps are widely used to explain deep learning predictions in medical imaging, yet visually plausible explanations do not necessarily reflect a model's true decision process and may therefore mislead clinicians. We investigate this problem using a Vision Transformer-based breast MRI classifier trained on the ODELIA Breast MRI Challenge dataset and evaluate multiple saliency methods, including Last-layer Attention, Attention Rollout, Grad-SAM, Gradient Attention Rollout, GMAR, Grad-CAM, and HiResCAM. Our study highlights two often-overlooked challenges in perturbation-based faithfulness evaluation. First, method rankings depend strongly on the perturbation strategy, varying across intensity-based perturbations and transformer-based attention masking. Second, benchmarking saliency methods requires distinguishing between class-specific and class-agnostic explanations. To enable fair comparisons, we introduce non-class-specific variants of gradient-based methods and evaluate both settings separately. Across protocols, Grad-CAM and Gradient Attention Rollout consistently emerged as the strongest class-specific methods, although their relative ranking depended on the evaluation design. These findings expose important limitations of current saliency-based explainability approaches and highlight the need for more robust and standardized evaluation frameworks for trustworthy clinical AI systems.

NAWE (Neural-Assisted Watermark Extraction) combines an explicit signal-processing watermarking construction with a pretrained neural host predictor. A periodic, perceptually masked watermark carrier provides synchronization, Polar coding supplies redundancy, and denoising followed by subtraction extracts the embedded watermark. The denoiser remains frozen, without watermark-specific training. A one-factor-at-a-time study compares Wiener, BM3D, DRUNet, and GS-DRUNet host estimators. Comparisons with TrustMark, SSL Watermarking, PixelSeal, and WAM show NAWE's lowest geometric and photometric class BER and strong message recovery, while filtering and noise remain limitations consistent with the non-adaptive selection of the watermark extractor. The comparison retains the systems' different payloads and coding.

This paper introduces GRIP, a pose-conditioned refinement framework for pixel-to-point matching and 2D to 3D registration. Given an initial coarse pose estimate, GRIP addresses the structural mismatch between grid based image descriptors and unordered point cloud descriptors by softly rendering learned 3D point features onto the image grid through Gaussian feature splatting. The rendered point derived feature map is then fused with image features by a pixel aligned transformer, enabling visual semantic and geometric cues to interact in a shared 2D representation. The refined features are decoded and propagated to finer resolutions for dense correspondence estimation and final pose refinement. Experiments on RGB D Scenes V2 and 7 Scenes demonstrate state of the art inlier ratio and competitive registration recall, with stronger performance under stricter evaluation thresholds.

The field of Artificial Intelligence has been adopted for many application domains. Vision Language Models are one of the recently advanced AI techniques that have been explored to support automotive features such as vehicle perception, and safety assurance. However, such language models are prone to hallucinations, posing a potential threat to the safety of automotive systems that may incorporate them. Within the automotive domain, VLMs could not only hallucinate traffic objects, but could also fail to identify traffic objects that are actually present, which may potentially lead to dangerous situations. Though we have observed a growing body of literature that proposes verification and validation techniques for safe and trustworthy AI, these methods are often studied in isolation, focusing either on run-time or design-time phases. Such isolated techniques could be insufficient in safety-critical, realistic contexts such as automotive perception systems. In this paper, we analyze design-time and run-time verification and validation techniques based on a taxonomy presented by Huang et al. We present an automotive study in which a design-time qualification workflow is proposed to complement run-time monitoring. This workflow combines a fixed safety-relevant ontology-based structured annotation system together with a synonym-based evaluation process to statistically evaluate three state-of-the-art VLMs against data from the nuScenes dataset. We observed that the proposed technique enables deterministic and repeatable quantification of the hallucinations VLMs generate in automotive perception-related tasks. The proposed workflow supports model comparison and deployment-oriented engineering decisions within the design-time verification and validation process and will contribute to a holistic verification strategy that strives towards trustworthy automotive perception systems

Frozen visual foundation models provide transferable features for visual place recognition, but fixed aggregation can suppress useful distinctions in new environments. We introduce TFA, a reliability-guided, training-free aggregation method requiring neither place labels nor task-specific weight updates. Our key observation is that reproducible retrieval need not be discriminative: independent codebooks can consistently retrieve a few database hubs. TFA combines cross-codebook agreement, retrieval coverage, and spectral statistics to control residual assignment, spectral shaping, and global-feature fusion. Its spectral kernel exactly recovers original descriptor similarity at zero intervention. Database-only TFA fixes its rules before accessing queries; TFA-C64 uses 64 disjoint unlabeled target images to calibrate retrieval for subsequent queries. Across 20 ground protocols with a fixed DINOv2-B backbone and matched resolution, database-only TFA improves Recall@1 over AnyLoc by 17.39 percentage points on MSLS-val and 9.55 on SPED. C64 mitigates failures of database-only calibration in driving environments. Across eight aerial/cross-view protocols, TFA achieves the highest Recall@1 among compared training-free heads in 14 of 16 DINOv2/DINOv3 backbone-protocol combinations. In a separate native-system comparison, DINOv2-G-based TFA-C64 reaches 91.46% Recall@1 on Pitts30k and 76.29% on VPAIR, outperforming the displayed training-free comparators on all five benchmarks. These results show that reliability-guided aggregation can recover additional retrieval capability from frozen representations, providing a practical baseline for new environments with scarce place supervision.

Detecting and localizing 3D point-cloud defects is essential for industrial inspection. However, existing methods often suffer from imprecise localization due to the lack of anomaly supervision and reliance on single-granularity representations. To address these limitations, we propose Anomaly Type-Aware 3D Anomaly Detection (AT3D-AD), a unified framework for joint detection, localization, and classification. Specifically, we first design the Physics-Driven Parametric Anomaly Synthesis (PDPAS) module employing multiple parametric functions to generate synthetic anomalies, providing explicit anomaly supervision. Then, we propose the Hierarchical Global-Local Anomaly Alignment (HiGLA) module to align global and local representations within the normal and anomalous groups. Finally, we propose the Semantic-Geometric Anomaly Classification (SGAC) module to jointly learn localization and classification, yielding spatially precise and type-discriminative anomaly representations. Extensive experiments establish new state-of-the-art performance on all four benchmarks. AT3D-AD achieves Object/Point AUROC scores of 98.1%/98.9% on Anomaly-ShapeNet and 95.0%/95.2% on Real3D-AD, while reaching 74.2% Macro-F1 for anomaly-type recognition on Real3D-AD.

Visual localization (VL) is a fundamental technology for vision applications such as virtual reality. Recently, a novel VL paradigm, Camera Ray Regression (CRR), has emerged, which maps 2D image patches to 3D camera rays, but its accuracy is limited. To improve CRR accuracy, we notice a compelling duality: the inverse of this mapping is inherently performed by the novel view synthesis model, \ie, Neural Radiance Fields (NeRF). While NeRF renders image patches from camera rays via differentiable ray marching, CRR predicts the rays from image patches. Motivated by this complementary relationship, we propose NeRF-aided Camera Ray Regression (NaCR), a unified framework that seamlessly bridges NeRF and CRR at the ray level. First, NaCR incorporates three simple yet effective enhancements into the CRR baseline. Second, leveraging a pre-trained NeRF, NaCR augments the training data by synthesizing novel views tailored for efficient, patch-level consumption. Finally, exploiting the differentiability of NeRF, NaCR forms a closed-loop supervision pipeline where photometric rendering errors are back-propagated to optimize the predicted camera rays. To ensure stable convergence within the highly non-convex image space, we introduce a two-stage training curriculum. Extensive experiments across indoor and outdoor benchmarks demonstrate that NaCR achieves competitive accuracy. Comprehensive ablation studies validate the efficacy of each proposed component.

Multimodal large language models (MLLMs) often struggle with fine-grained visual perception when processing complete images, as critical evidence may only appear in local regions. On-policy self-distillation (OPD) enables transferring privileged visual knowledge from informative views to full-image policies, but querying the teacher for every rollout introduces substantial supervision costs. In this work, we propose BAS-OPD, a budget-aware selective OPD framework that allocates teacher supervision under limited query budgets. Instead of querying all rollouts, BAS-OPD selects informative samples while maintaining full-batch student generation. We explore random, uncertainty-based, and learned utility-based selection strategies, where the learned selector estimates query value from detached rollout statistics and online utility signals derived from student–teacher agreement and teacher confidence without additional student forward passes. BAS-OPD only changes training-time supervision allocation and preserves single-pass full-image inference. Experiments on fine-grained multimodal perception benchmarks demonstrate that BAS-OPD achieves strong performance while substantially reducing teacher supervision costs, highlighting the effectiveness of selective OPD under constrained budgets.