Peer Revenue Equity in science

Papers

Fresh from arXiv, typeset properly. Highlighted words trade on the market.

Computer Science Computer Vision

cs.CV Watch Computer Vision (sign in to use)

Monday 7 September

Computer Vision

ARNAI: Artifact Removal Network based on Autoencoding and Inpainting for Robust Spinal Image Segmentation and Measurement

Purpose: This study aims to develop an AI framework applicable for postoperative imaging for automated measurement of spinopelvic parameters on radiographs with robustness to the presence of spinal implants. Materials and Methods: We retrospectively reviewed lateral lumbar spine radiographs from two institutions (Internal: January 2017–December 2024; External: October 2021–September 2025). We developed the Restore, Segment, and Measure (RSM) framework, incorporating a novel Artifact Removal Network based on Autoencoding and Inpainting (ARNAI) to mitigate implant-related artifacts in postoperative radiographs. Segmentation and spinopelvic parameter (PT, LL, SS, SCA) measurement performance were assessed using Wilcoxon signed-rank tests and intraclass correlation coefficients. Results: When ARNAI was added to a recent Transformer-based segmentation model, FCBFormer, the mean DSC increased to 0.870 from 0.814, with marked gains at L3–L5 and smaller improvements at L1–L2. On 91 radiographs with implants, the mean L4–L5 segmental Cobb angle error decreased to 4.7 {\deg} from 15.6–16.2 {\deg}, an average error reduction of 70%. The ICC for L4–L5 segmental Cobb angle improved to 0.54 (Rater 1) and 0.59 (Rater 2) from 0.18, and ICCs for pelvic tilt, lumbar lordosis, and sacral slope all exceeded 0.70. The improvement in L4–L5 segmental Cobb angle error was statistically significant in the internal implant-containing cohort after correction for multiple comparisons. Conclusion: The proposed RSM framework improved automated spinopelvic parameter measurement in implant-containing postoperative radiographs. By mitigating implant-related artifacts, ARNAI improved segmentation and downstream measurement accuracy, with the greatest benefit observed for L4–L5 segmental Cobb angle estimation, where the mean error was reduced by approximately 70%.
Read the full abstract

All authors Sang-Jin Park, Jinyoung Choi, Seokwon Kim, Seungeon Song, Insu Park, Dougho Park, Taeyeon Kim, Youjin Lee, Donghoon Yang, Jaeman Cho, Joongwon Yang, Mansu Kim, Heumdai Kwon, Hong Gyu Baek, Dae Chul Cho, Injung Kim

Computer Vision · Cross-listed from eess.IV

AstraMoE-SR: Trajectory-Guided Diffusion for Blind Satellite Jitter Deblurring and Super-Resolution

Pushbroom satellite imaging couples limited spatial resolution with platform attitude instability. Platform jitter produces spatially varying motion blur because each scan line is acquired under a different instantaneous attitude, while perspective geometry causes the same perturbation to induce different pixel displacements across the field of view. Existing blind restoration methods that assume a spatially invariant kernel and satellite jitter correction methods that rely on auxiliary observations are therefore not directly applicable. We present AstraMoE-SR, a single-image framework that jointly restores motion blur and spatial resolution without auxiliary measurements. Rather than estimating a blur kernel, we infer how the camera moved by reparameterizing degradation as a local exposure trajectory under pushbroom geometry. A conditional diffusion model estimates the trajectory distribution, mitigating the over-smoothing of high-frequency jitter by deterministic point estimation. The predicted trajectory conditions a pretrained latent diffusion backbone through trajectory-guided geometric alignment and spatially adaptive reconstruction. We further show that the remaining point-wise trajectory error is consistent with intrinsic jitter-phase ambiguity that is not resolved by increasing estimator capacity. On all 1,411 DOTA-v1.0 images degraded using our physically motivated forward model, AstraMoE-SR is the only evaluated method to outperform the no-restoration baseline across every fidelity metric, improving on StableSR by 0.64 dB PSNR, 15.2% LPIPS, and 0.091 DINO feature similarity. Reconstructions conditioned on predicted trajectories differ negligibly from those using ground-truth trajectories, indicating that the estimates retain the degradation information required for effective restoration.
Read the full abstract

Computer Vision

Fine-Grained Visual Preprocessing and Dual-Stream Temporal Modeling for Multimodal Sentiment Analysis on Social Media

Multimodal sentiment analysis often remains text-dominant due to raw-video noise and insufficient temporal modeling. Using CH-SIMS v2.0S, this study proposes three improvements: the NAPS pipeline—a seven-stage system integrating face tracking,identity embedding, and normalized lip-motion analysis to reduce visual noise;DS-TANet, combining an EfficientNetB2 static stream, RAFT optical-flow motion stream, motion-guided attention, and Bi-GRU temporal modeling; and DS-TAFNet, fusing visual and MacBERT-Base textual representations via concatenation fusion. With NAPS, the static visual baseline achieves 80.98% Macro F1, comparable to the text baseline of 80.55%; DS-TANet improves visual Macro F1 to 82.58%;and DS-TAFNet achieves 87.49% accuracy and 87.48% Macro F1. These results demonstrate that improving visual input quality and temporal representation is more effective than increasing fusion complexity under limited-data conditions.
Read the full abstract

All authors Su Li, Yigong Zhang, Lei Xiong, Chune Li

Computer Vision · Cross-listed from cs.LG

NeuCME: Toward Dynamic Multimodal Continual Learning via Neural Combinatorics of Multiple Experts

Multimodal continual learning has recently shown great potential for developing agents with human-like intelligence by continuously learning new tasks across multiple modalities. However, existing methods typically assume that the set of modalities per task is predefined and fixed. In this paper, we investigate a more realistic learning setting, referred to as dynamic multimodal continual learning, in which the set of modalities may vary across tasks rather than remaining fixed. This setting involves two primary challenges: (i) spatio-temporal catastrophic forgetting and (ii) adaptive multimodal fusion. To address these challenges, we propose NeuCME (as shorthand for Neural Combinatorics of Multiple Experts), a novel framework designed to effectively learn and integrate knowledge across tasks with varying modalities. The proposed NeuCME model comprises three key components, namely modality-combinational rehearsal, multi-gated mixture-of-experts, and task relevance-guided distillation. Furthermore, we formulate an evaluation metric to quantify the dynamism of task sequences and then set up a comprehensive benchmark with different degrees of dynamism. Extensive experiments using four real-world datasets demonstrate that the proposed NeuCME outperforms state-of-the-art methods markedly.
Read the full abstract

All authors Kai Guo, Chuanbin Liu, Peng Hu, Hao Wang, Xi Peng

Computer Vision

GIFT: Goal-Injected Fine-Tuning for Efficient Manipulation Policy Adaptation

Compared with relying solely on initial observations and language instructions, predicting goal images with generative models as high-level visual guidance can significantly enhance the robustness of Vision-Language-Action (VLA) models. However, most existing foundation models have not systematically incorporated goal image conditioning due to the high computational training cost. To this end, we propose Goal-Injected Fine-Tuning (GIFT), a lightweight and efficient fine-tuning framework that seamlessly integrates generated goal images into multiple representative pretrained VLA models. Our approach introduces goal image features into observations via a zero-initialized convolution which progressively grows parameters from zero and prevents harmful noise from disrupting the pretrained policy during fine-tuning. As training proceeds, goal information is gradually incorporated, enabling efficient goal understanding without disrupting model stability. We further introduce a refined image editing method to generate semantically and visually consistent goal images from initial observations and task instructions. Experiments show that goal-aware VLA models achieve substantial performance gains across tasks: with only a single epoch of fine-tuning, GIFT outperforms the base model by 6.0% and 13.4% on two SIMPLER settings, and by 4.7% on LIBERO, demonstrating both efficiency and effectiveness.
Read the full abstract

All authors Xiaoyuan Fang, Shuo Feng, Yuxuan Wang, Enhua Cheng, Peng Zhou, Piji Li

Computer Vision

CGSM: Concept-Guided Segmentation Model for Precise Pulmonary Lesion Delineation

Accurate segmentation of pulmonary lesions is essential for effective clinical diagnosis and treatment strategies. Existing segmentation approaches often lack task-specific semantic guidance, as text-based annotations typically offer coarse localization of lesions, leading to inadequate delineation of lesion boundaries and poor performance on small-scale lesions. To address this, we propose CGSM, a Concept-Guided Segmentation Model that integrates LLM-generated and clinically reviewed concepts into the segmentation process. Specifically, we design a Concept-Visual Alignment Module (CVAM) to activate relevant tokens within the concepts that align with visual features, enhancing the interaction between textual and visual information. In addition, we introduce a Concept Modulated Decoder (CM-Decoder), which uses concepts from CVAM as modulation signals to facilitate the adaptive fusion of image and text features, improving the segmentation accuracy. Extensive experiments on two public datasets show that CGSM achieves state-of-the-art performance, with results of 91.59% Dice and 84.49% mIoU on the QaTa-COV19 dataset, demonstrating its effectiveness in pulmonary lesion segmentation.
Read the full abstract

All authors Changheng Lin, Wenjie Zhang, Yushan Lu, Xinyue Yan, Xiao Jia, Wei Zhang

Computer Vision

AV-SafetyBench: A Safety Benchmark for Text-to-Audio-Video Generation

Recent text-to-audio-video (T2AV) models jointly generate video, speech, sound effects, and ambience from a single text prompt. This capability poses new challenges for safety evaluation, as unsafe content may be conveyed through the audio track or arise only when the visual and audio tracks are interpreted jointly. Existing safety benchmarks largely focus on either generated video or generated audio in isolation and are therefore not designed to capture these risks. To close this gap, we introduce AV-SafetyBench, the first safety benchmark developed specifically for T2AV generation. AV-SafetyBench comprises a four-axis, 13-category taxonomy and 5,200 manually reviewed prompts that specify visual scenes, speech, and non-speech audio. Our evaluation protocol assesses each output under three views: Full-AV, Video-Only, and Audio-Only. It then uses the Video-Only and Audio-Only judgments to assign Full-AV unsafe outputs to one of four risk sources: Video-Only, Audio-Only, AV-Both, or AV-Joint. We evaluate five open-source T2AV models and validate the automated Full-AV judgments against human annotations. Across the five models, Full-AV Unsafe Rates range from 25.1% to 49.4%. Beyond these aggregate rates, risk-source analysis reveals that, for four of the five models, Audio-Only and AV-Joint cases-unsafe outputs missed by video-only evaluation-account for 41.6-48.3% of Full-AV unsafe outputs for which a risk source could be assigned. In the Cross-Modal Harm Emergence category, AV-Joint accounts for 87.5% of unsafe outputs withan assigned risk source. Together, these findings demonstrate the value of AV-SafetyBench for evaluating T2AV safety across the visual and audio modalities and their interaction.
Read the full abstract

Computer Vision

AnomalyCraft-700K: Component-Level Controllable and Verifiable Synthetic Anomalies for Fine-Grained Video Anomaly Understanding

Progress in video anomaly understanding (VAU) has long been limited by inherent deficiencies of real-world anomaly videos, which are hard to collect and offer little control over their content. Synthetic anomaly approaches partially alleviate data scarcity, yet their generation remains largely controlled at the category or prompt level. They also lack component-level verification of video-text consistency and provide insufficient hard normal samples near the normal-anomaly boundary. To address this, we present AnomalyCraft-700K, a component-controllable synthetic anomaly dataset for fine-grained VAU, containing over 40K videos and over 700K task-level textual annotations. From fine-grained semantic components and a progressive three-stage pipeline, we craft anomaly events that are richly detailed, semantically controlled, and temporally structured, and additionally construct per-category hard normal samples to prompt the model to discriminate based on anomaly semantics rather than surface visual cues. Moreover, using the components as verification units, AnomalyCraft-700K further performs component-wise correction of video-text discrepancies introduced during generation, providing reliable annotations with verified cross-modal alignment for six tasks that progress from anomaly detection, through anomaly retrieval and captioning, to fine-grained anomaly reasoning. Evaluations of widely used methods under both traditional and MLLM-based protocols demonstrate that AnomalyCraft-700K serves as an effective source of supervision, from anomaly detection to fine-grained anomaly understanding.
Read the full abstract

All authors Yuzhou Long, Haodong Zhang, Yunpeng Yang, Peng Wu, Guansong Pang

Computer Vision

Re-calibrated Contrastive Loss for Transformation-Aware Prompt Conditioning in Vision-Language Models

Ensuring effective transfer learning for vision-language models without compromising their generalization performance is crucial. However, many existing methods overlook data characteristics and simply reuse the training strategies adopted during pre-training. Specifically, they treat same-class samples as distinct instances and transform images independently of their paired text prompts, which makes model learning more difficult. We address these limitations through transformation-aware prompt conditioning and a re-calibrated contrastive loss. Fixed text descriptors identify the transformations applied to paired images, providing transformation-level consistency without altering class semantics. This design aligns the image and text branches at the transformation level, enabling richer representations while preserving the models' ability to generalize. In addition, our loss function mitigates positive-gradient dilution in soft-target cross-entropy when each anchor has multiple valid positives. During transfer, our approach treats same-class samples as positives rather than distinct instances, enabling the model to learn domain-specific features more effectively. Experiments across distribution shift, transfer learning, and few-shot settings demonstrate consistent improvements over existing approaches. Source code for our method is available at https://github.com/SoongE/ReCalCon.
Read the full abstract

Computer Vision

DPSF-Net: A Dual-Prior Spatial-Frequency Network for Real-World Remote Sensing Image Dehazing

Real-world remote sensing image dehazing (RSID) remains challenging because atmospheric scattering, spatially non-uniform haze and colour distortion jointly degrade structural and spectral information. Most deep learning methods rely on RGB inputs and spatial-domain feature extraction, which limits their ability to separate global background haze from local surface details. Here, we propose DPSF-Net, a dual-prior spatial-frequency network built on MCAF-Net for real-world RSID. The network uses hazy RGB images and dark channel prior (DCP) maps as joint inputs, allowing physical degradation cues to guide end-to-end feature learning. A spatial-frequency residual interaction block introduces a FourierUnit branch into multi-directional spatial interaction to model large-scale haze components. A prior-guided feature attention module adaptively fuses prior and attention features to reduce colour shift and structural distortion. A selective kernel complementary fusion module screens multi-scale skip features through bidirectional residual complementary gating and selective kernel fusion. Extensive experiments demonstrate that DPSF-Net achieves state-of-the-art performance on the real-world RRSHID remote sensing image dehazing benchmark and remains competitive across multiple synthetic datasets. Moreover, the proposed method strikes a favourable balance among restoration quality, parameter count and computational complexity, supporting the effectiveness of dual-prior spatial-frequency modelling.
Read the full abstract

Computer Vision

MSSP: Multi-Scale Spatially-Constrained Partition for Unsupervised Semantic Segmentation of 3D Point Clouds

3D point cloud semantic segmentation is essential for real-world spatial understanding, yet the prohibitive cost of human annotations motivates unsupervised approaches that require no labels. Existing superpoint-based methods typically rely on spectral analysis at a fixed granularity, failing to capture the hierarchical semantic structures inherent in complex indoor scenes. To bridge this gap, we present a Multi-Scale Spatially-Constrained Partition (MSSP) framework that combines multi-scale spectral analysis with spatially-constrained clustering. Multi-scale spectral analysis constructs enriched superpoint descriptors across multiple clustering granularities; however, the resulting high-dimensional feature space calls for a structural prior to translate into cleaner segmentation. Spatially-constrained clustering supplies this prior by restricting superpoint merging to physically adjacent regions, imposing the spatial coherence needed for multi-scale features to be effective. Extensive experiments on S3DIS and ScanNet show that MSSP achieves the best mIoU among unsupervised methods on the main benchmarks, with particularly significant gains on S3DIS. Notably, our ablation reveals a regularize-then-enrich interaction: multi-scale features alone do not improve final segmentation, yet become highly effective when coupled with spatial regularization, underscoring that spatial coherence is aprerequisite for multi-scale representations in superpoint clustering.
Read the full abstract

All authors Zhenghao Zhang, Xinjie Wang, Wei Wang, Jun Zhang, Hanyun Wang

Computer Vision

Joint-Conditioned Stereo Surface Reasoning for Interaction Field Estimation

Predicting hand–object interaction fields requires locating the nearest object-surface point for each hand joint, often from small and partially occluded image regions. We view this task as joint-conditioned surface-endpoint estimation: each joint has its own nearest endpoint, while endpoints from the same hand can draw on shared local surface evidence. This structure motivates Joint-Conditioned Stereo Surface Reasoning (JSSR). A temporal-stereo network jointly predicts 3D joints, a direct interaction field, and per-view endpoint evidence. Calibrated candidate search evaluates endpoint hypotheses using joint-specific image compatibility and cross-view correspondence. A hand-shared candidate support lets joints draw on common surface evidence, and a learned residual gate controls the geometric correction when observations are ambiguous. Our system built on this method ranked third on the SHOW3D Interaction Field Challenge leaderboard.
Read the full abstract

All authors Yanlin Jin, Yifan Yang, Bowen Yang, Kai Zhu

Computer Vision

PRG-Fusion: Orchestrating Generative Priors with Reconstruction Evidence for Driving View Synthesis

Synthesizing photorealistic driving videos along specified trajectories is essential for scalable closed-loop simulation. Reconstruction-based methods leverage neural rendering to synthesize geometrically consistent views, but often exhibit diverse artifacts and missing content when the viewpoint deviates from the training trajectory. In contrast, generative models can synthesize realistic views along arbitrary trajectories from vehicle sensor data, yet often struggle to maintain temporal and geometric consistency across frames. To combine the strengths of both, we propose PRG-Fusion, a framework for driving view synthesis that uses reconstruction evidence to orchestrate generative priors across regions. Specifically, we extract region-wise degradation evidence from reconstructed driving scenes and convert it into Preserve, Repair, and Generate (PRG) labels. At inference, these labels serve as a unified routing policy for region-aware spatiotemporal synthesis, orchestrating 3DGS appearance preservation, LiDAR-guided structural correction, and video-prior-driven content completion across Preserve, Repair, and Generate regions, respectively. We then follow a two-stage training paradigm, first establish geometric control from sparse LiDAR projections and subsequently learning appearance control from dense 3DGS renderings. Extensive experiments on Waymo demonstrate that PRG-Fusion achieves state-of-the-art overall performance in novel trajectory video synthesis, with superior visual quality and geometric fidelity while maintaining competitive view consistency under large trajectory shifts.
Read the full abstract

All authors Sipeng He, Jialei Chen, Zhen Fang, Dongchun Ren, Feng Zhao

Computer Vision

CARDEA: Auditable Reasoning Grounded in Spatial Evidence for End-to-End Coronary Angiography Interpretation

Invasive coronary angiography (CAG) is the gold standard for diagnosing coronary artery disease, but interpretation varies substantially among observers. Existing AI systems can improve consistency but lack auditable decision processes and are limited in comprehensive open-ended assessment, undermining clinician trust and clinical adoption readiness. We developed CARDEA, a unified large vision-language model that serves as the inference core of a CAG pipeline. It was trained solely on public datasets and closed-ended tasks in three stages: visual feature alignment, a self-distilled Chain-of-Box (CoB) cold start, and reinforcement learning with verifiable rewards (RLVR) with a CoB reward encouraging bounding-box use in the reasoning trace. We assessed its two study-level diagnoses, dominance classification and complexity assessment, against a dedicated classifier and two interventional cardiologists. Report generation was excluded from training and evaluated zero-shot across stages on an external cohort using vessel-severity macro-$F_1$. CARDEA trailed the classifier on in-distribution dominance but drew level under domain shift (accuracy, 0.91 [95% confidence interval (CI), 0.86 to 0.95]) and was comparable to the cardiologists on complexity assessment (accuracy, 0.90 [CI, 0.82 to 0.97]). Only RLVR improved zero-shot report generation, raising its vessel-severity macro-$F_1$ (0.686 [CI, 0.664 to 0.707]) above the untuned base model (0.513) and over twice the always-normal floor (0.312). CARDEA runs an end-to-end CAG pipeline from raw multi-view videos through keyframe selection to study-level diagnosis while exposing auditable spatial evidence behind its conclusions. RLVR on verifiable closed-ended tasks surfaced open-ended reporting ability that supervised imitation did not. Clinical use requires prospective validation against expert cardiologists.
Read the full abstract

All authors Jia-Jen Lee, Shih-Yen Hou, Kee Koon Ng, Wei-Chun Wang, Shih-Sheng Chang

Computer Vision

Sub-Pixel Affine Registration of Space Debris Images via the Radon Point Spread Function

Inter-frame affine misalignment caused by platform jitter and attitude adjustments poses a fundamental challenge for multi-frame analysis of point targets in optical surveillance. Conventional registration methods rely on spatial intensity correlations or distinctive image features, both of which are largely absent in low-signal-to-noise-ratio point target imagery. We introduce the Radon Point Spread Function (RPSF) to characterize point targets in the Radon-transformed domain, and derive a closed-form framework that jointly estimates inter-frame translation and rotation from as few as four scalar RPSF samples per frame pair. The method requires no iterative optimization, feature extraction or interpolation, which is suitable for resource-constrained onboard processing. Simulation results confirm sub-pixel translation accuracy and a mean rotation error of 0.2556{\deg} at 1{\deg} Radon angular resolution. Validation on five real space debris datasets including both ground-based and in-orbit observations yields a mean calibration error below 0.5 pixels, substantially exceeding the precision required for reliable multi-frame processing.
Read the full abstract

All authors Shenshen Luan, Miaomiao Tian, Shuai Jiang, Yan Yang, Shuguo Xie, Zezhou Sun

Computer Vision

Emo-DVS: A Multimodal Benchmark for Privacy-Aware Emotion Recognition with Event Cameras

Emotion analysis is a fundamental task in computer vision, but its practical deployment remains constrained by the privacy risks inherent to conventional RGB cameras. Bio-inspired event cameras present a promising hardware-level solution because they capture asynchronous brightness changes, thereby reducing exposure of facial identity details while leveraging high dynamic range for robust perception under challenging illumination conditions. Despite these advantages, existing event-based methods struggle in complex real-world settings due to limited dataset scales, simple acquisition conditions, and reliance on single-modality visual cues. To address these, we establish a challenging tri-modal benchmark with event, audio, and text modalities and propose the Information-Guided Gated Fusion (IGF) framework, which first pre-trains an event encoder on the FAU subset of Emo-DVS to capture fine-grained facial dynamics, then employs adaptive modality gating to suppress modality-specific noise, and finally leverages mutual information maximization to align robust cross-modal representations. To alleviate data scarcity, we introduce Emo-DVS, the first large-scale event-based emotion analysis dataset, which couples dynamic illumination with the Facial Action Unit (FAU) subset and emotion subset. Extensive experiments demonstrate that IGF achieves state-of-the-art performance.
Read the full abstract

All authors Jiaqi Chen, Qinfu Xu, Hao Zhuang, Liyuan Pan

Computer Vision

BEFORE THE FLIP: Measuring Hidden Score Shifts In Quantized Vision Language Models Before The Answer Changes for Visual Question Answering

Quantization makes vision language models (VLMs) cheaper to store and run by using fewer bits to represent their weights. While unchanged answers on visual question answering (VQA) after compression are an expected behavior, they can still hide changes in the underlying scores (log probabilities). For example, a model may still answer yes after compression, even as the score gap between yes and no shrinks. We introduce BEFORE THE FLIP to measure these hidden changes. Our method compares the score change caused by compression with the change caused by replacing the image's internal representations, or image tokens, with one fixed average token. We then increase the precision of one weight group at a time to identify where extra bits help, and test whether choosing different groups for each question offers benefits beyond shuffled controls. Among 8,277 LLaVA questions where image token replacement measurably affects the scores, 4-bit compression shifts the yes or no score gap farther toward the replacement output than 8-bit compression. Qwen shows the same pattern, but with a smaller difference. Yet only 265 of 9,000 LLaVA answers change at 4 bits. In a separate study of 1,024 calibration questions, choosing weight groups separately for each question does not outperform both shuffled controls at any tested storage budget. These findings show that compression can alter the scores behind unchanged answers, but do not establish a reliable benefit from adjusting precision for each question.
Read the full abstract

All authors Sourajit Saha, Shubhashis Roy Dipta, Shaswati Saha, Nobin Sarwar, Yuxuan Jiang

Computer Vision

Contextual Observer Grounding: Evaluating Situated Spatial Reasoning in Vision-Language Models

Reasoning over language instructions in embodied tasks such as robotics often requires understanding spatial relations from a speaker's situated perspective. Humans infer such perspectives from shared environmental knowledge, activity context, and commonsense. Recent vision-language models (VLMs) appear capable of spatial reasoning, but their ability to infer a speaker's viewpoint from contextual cues and interpret situated spatial relations from that viewpoint remains unclear. We call this capability contextual observer grounding. To study this capability, we construct the Point-of-View Benchmark (POVBench), a dataset of 3D scenes and queries that disentangles Inferred, Stated, and Given forms of observer grounding in natural embodied communication. Given multi-view observations and a natural-language sentence, models must localize unseen or underspecified targets from situated spatial and contextual cues. Across state-of-the-art VLMs, localizing targets from directional language remains challenging, even when observer grounding is made explicit. We find that explicit breakdowns of observer-relative spatial reasoning improve target localization. Our project page is available at https://mimo-owl.github.io/POVBench/.
Read the full abstract

Sunday 6 September

Computer Vision · Cross-listed from cs.CL

LLM-Driven Training-free Location-Attribute Synergic Fusion: A Closed-Loop Paradigm for Dual-source Encrypted POIs and LULC Mapping

Dual-source encrypted points of interest (DSEP), POIs from two encrypted coordinate systems, suffer from intertwined location and attribute uncertainties, including nonlinear systematic misalignment and naming inconsistency, hindering land-use/land-cover (LULC) mapping. To the best of our knowledge, this paper is the first to propose an LLM-driven, training-free location-attribute synergic closed-loop optimization paradigm for DSEP fusion. The paradigm jointly refines location transformation and attribute correspondences through iterative feedback. Attribute-synergic location fusion uses an LLM-driven attribute matching method to establish DSEP correspondences, reducing matching complexity from O(N^2) to O(N), and refines transformation coefficients using an improved particle swarm optimization algorithm within ISODATA-clustered local subregions. Location-synergic attribute fusion then reassesses attribute confidence from updated geometric residuals through an LLM-fuzzy method. The refined correspondences feed back into location optimization, forming a bidirectional closed loop. Sample purification and adaptive radius contraction enable convergence in essentially two iterations. We further propose a training-free LULC mapping method that inherits land-use classes from encrypted maps through location fusion, producing vector-raster integrated LULC maps. A reference-free POI fusion evaluation method is applied across 31 provincial capitals and municipalities in mainland China. Experiments show that our method achieves an average DSEP location fusion residual of 4.58 m and attribute fusion accuracy of 95.12%, improving upon the open-source baseline and state-of-the-art method by 1.77 m and 14.87%, respectively. Overall, the method provides a training-free solution for DSEP fusion and enables georeferencing of encrypted vector data to WGS-84 without field-surveyed ground control points.
Read the full abstract

All authors Chang Li, Xingtao Peng, Yongjun Zhang, Yinfei He, Cairun Huang

Computer Vision · Cross-listed from cs.LG

RS-Claw-Evolution: Environment-Feedback-Driven Evolution for Lightweight Remote Sensing Agents in Long-Horizon Tasks

Large language model-driven remote sensing (RS) agents offer a promising approach to automating geospatial analysis. However, lightweight RS agents based on compact language models struggle with multi-step interactive tasks due to loss of long-horizon states, inefficient environmental feedback utilization, and sparse optimization signals. We propose RS-Claw-Evolution, an environment-feedback-driven framework that progressively improves lightweight agents through three stages. Interaction evolution uses executable code to control observations, maintain intermediate states, and reduce context redundancy. Experience evolution combines failure-aware trajectory generation with error-turn masking to learn from informative failure-recovery experiences without imitating faulty actions. Decision evolution uses reinforcement learning with multi-dimensional environment rewards and turn-level advantage protection to optimize tool-use behaviors and improve credit assignment in long sequences. On Earth-Bench, the optimized Qwen3-4B-based agent achieves 65.9% accuracy in Autonomous Planning mode, outperforming the untrained Qwen3-32B baseline (43.8%) and DeepSeek-V3.1 (60.8%), while approaching GPT-5 (71.6%). These results demonstrate that learning from environmental feedback can improve lightweight agents and narrow their performance gap with larger models in long-horizon RS tasks.
Read the full abstract

All authors Kai Ouyang, Dongyang Hou, Liangtian Liu, Zeyuan Wang, Ziyu Li, Chengfu Liu, Zichao Tang, Xuezhi Cui, Shengwu Ouyang, Wentao Yang, Hanwen Yu, Haifeng Li

Computer Vision

Filling the Unseen: Scene Extrapolation via 3D Gaussian Splatting

3D Gaussian Splatting achieves photorealistic reconstruction within training view distribution, yet it degrades on out-of-distribution novel views, exhibiting holes in unobserved regions and artifacts in observable areas. Recent works formulate this task as extrapolation and interpolation and try to address it with generative models, but remain limited in extrapolation scale and quality. They repeat a generate-reconstruct-shift cycle to progressively build a scene, which introduces accumulated errors with every step conditioning on previous outcomes. In this work, we propose a holistic framework for extrapolation and interpolation. We devise an independent camera view detection mechanism to enable parallel conflict-free extrapolation, circumventing the reliance on the aforementioned error-prone cycle. Building upon this, we design a hierarchical pipeline that extrapolates independent and dependent camera views separately. Additionally, previous methods overlook inconsistency between generated and original images, resulting in compromising well-reconstructed areas. We propose a plug-and-play Quality-Aware Mask (QA-Mask) module, enabling selective utilization of generated data. By calibrating learning weights with pixel-wise rendering quality, it prevents generation-induced degradations on well-constructed areas. Extensive experiments demonstrate the superior performance of our framework, with QA-Mask generalizing to multiple generative reconstruction models.
Read the full abstract

All authors Yunlai Zhou, Yiren Lu, Tuo Liang, Disheng Liu, Vipin Chaudhary, Yu Yin

Computer Vision

TryOnReward: Learning Foveated Consistency for Reinforcement Fine-Tuning of Virtual Try-On

Virtual Try-On (VTON) aims to dress a person with the reference garment, producing visually reasonable results aligned with human preferences. Turning this preference-oriented goal into an actionable objective relies on a scoring function aligned with human taste. However, classic fidelity metrics exhibit weak correlation with human judgments, and generic VLMs fail to provide the discriminative granularity demanded by try-on quality evaluation, which hinges on faithfully preserving garment and person details. This shortcoming is further exacerbated in the reinforcement fine-tuning (RFT) optimization and leads to severe reward hacking. To this end, we present TryOnReward, a fine-grained reward model tailored for VTON. Built on a vision-language backbone, it adopts a foveation calibration objective that grounds each quality dimension in the relevant region to avoid global shortcut learning. Meanwhile, TryOnReward jointly optimizes pairwise preferences and per-dimension quality scores via margin-aware supervision, leveraging both relative and absolute quality signals. For model training and evaluation, we build TryOnReward-100K, a human-annotated per-dimension rating dataset, alongside TryOn-Bench and TryOnRewardBench, two benchmarks covering diverse real scenarios. Extensive experiments confirm that TryOnReward significantly outperforms generic judges in human preference alignment, and when serving as the RFT reward function, it consistently yields human-preferred try-on results across multiple baselines.
Read the full abstract

All authors Xueheng Li, Yong Liu, Xiaolong Fu, Wen Xue, Chengjun Xie, Yipeng Sun, Yan Li, Simiu Gu

Computer Vision

Interpretable Temporal Video Reasoning with EventGraph and EventField

We present a structured temporal video reasoning pipeline built around a discrete EventGraph, a continuous EventField, and a human-readable EventGlyph view. On a calibrated EPIC-KITCHENS subset of 10 videos and 50 temporal reasoning questions, EventField+Glyph achieves 0.98 overall accuracy, which is higher than the caption baseline by +0.40 (paired p = 1.1 \times 10^{-5}) and direct VLM-only QA by +0.20 (p = 0.0063) on this subset. We further evaluate annotation-source variations, including manual, heuristic, and heuristic+Gemini pipelines, and find that the best structured method stays above the caption baseline across settings. We also include cross-video pair benchmarking and an appendix gallery of glyph outputs for all studied videos. Overall, the results indicate that structured temporal representations can support both performance and inspectability by preserving symbolic structure, capturing temporal continuity, and providing human-readable diagnostics for video reasoning.
Read the full abstract

Computer Vision

Sampling headroom is not selection gain: a compute-value audit of test-time scaling for video world models

Test-time scaling (TTS) can improve generation only when additional compute produces better candidates and the system can reliably identify them. This distinction is especially important for video world models, where a wider sample pool may contain stronger rollouts without improving the output that is ultimately selected. We introduce the Compute-Value Audit (CVA), a sequential framework that asks whether extra sampling creates opportunity, observable signals provide a reliable state, that state supports a beneficial action, and the resulting gain exceeds the full entry fee of generation and verification. On 192 Physics-IQ scenes, expanding the pool from 4 to 16 candidates increases oracle quality by +9.23 IQ (95% CI [+7.44, +11.14]), but Flow, Cycle, and VideoReward fail to recover this headroom reliably. Across three generators, none of twelve adaptive-depth policies outperforms uniform compute; they recover only 42-69% of the measured entry fee. A matched-60-NFE Predict-and-Perturb intervention on VideoPhy2 is likewise negative across three fresh-seed replicas. These negative results are not universal: anchor-explorer passes all four stages in a sparse PRM800K setting, MMLU-Pro exposes the gap between predictive state and useful action, and a privileged paired future establishes a positive video upper bound. Together, these results show that sampling headroom has deployment value only when it can be converted into a reliable decision whose benefit survives the complete compute charge. Code is available at https://github.com/YuhuaJiang2002/sampling-headroom-is-not-selection-gain.
Read the full abstract

Computer Vision

A Comprehensive Review of Multimodal Facial State Analysis: Tasks, Methods, and Resources

Facial state analysis plays a crucial role in understanding human expressions, psychological modeling, and human computer interaction. Traditional unimodal vision-based methods are often limited by environmental sensitivity and weak interpretability. Multimodal facial state analysis addresses these issues by integrating complementary cues from visual, audio, textual, physiological, and other related modalities. This survey emphasizes two key aspects: on one hand, multimodal learning enables contextual semantic understanding for improved facial state reasoning and leverages interpretable language generation to enhance model explainability; on the other hand, multi-task learning allows simultaneous analysis of expressions, action units (AUs), and face-based soft biometrics (e.g., age, gender), effectively capturing fine-grained expressions and improving cross-scene generalization. This survey reviews core tasks, representative methods, and datasets in multimodal facial state analysis, focusing on facial expression recognition, AU detection, and face-based soft biometric estimation, and emphasizing the unique value of language in providing contextual semantics, enhancing reasoning, and generating explanations. The survey aims to provide an up-to-date overview of the literature and to highlight future research directions for multimodal, interpretable, and multi-task adaptive facial state analysis.
Read the full abstract

All authors Xuri Ge, Tianshuo Zhang, Ruihan Li, Hui Ye, Kaiwen Zheng, Junchen Fu, Da Huo, Joemon M. Jose, Hu Han

Computer Vision

(How) Do MLLMs Report Bistable Images Like Humans?

Bistable images such as the duck-rabbit are classic stimuli in which one image supports multiple mutually incompatible interpretations, typically reported one at a time in humans. We ask whether multimodal large language models (MLLMs) show similar report behavior and what internal computations support it. Using the LLaVA family, we study two tractable dimensions: modulability, whether reports can be biased by bottom-up visual cues and top-down linguistic priors, and exclusivity, whether responses commit to a single interpretation. We test both on the canonical duck-rabbit and on synthetic Visual Anagrams to mitigate memorization confounds. Behaviorally, both visual and linguistic manipulations systematically shift reports in human-consistent ways, while responses remain predominantly exclusive. Mechanistically, these effects arise from competing image-token representations, distinct pathways for bottom-up and top-down modulation, and a link between exclusive reporting and object-count encoding. Code and data are available at https://github.com/rtakatsky/mllm-bistable-images.
Read the full abstract

All authors Ryota Takatsuki, Tomoki Doi, Amane Watahiki, Anil K. Seth, Hitomi Yanaka

Computer Vision · Cross-listed from cs.RO

Identifying Habit, Physics, and Nuisance in Robot World Models

Teleoperated demonstrations are often multimodal even when the underlying dynamics are nearly deterministic given the executed action. We argue that this multimodality typically mixes three factors–operator habit in action selection, shared physics, and observation nuisance–and that entangled next-observation predictors absorb all three. We formalize the split with a structural causal model a=g(h,z,u), z'=f(z,a), o=r(z,c), and test it with complementary interventions: replacing or shuffling actions at fixed state sharply increases next-state error, whereas appearance and camera changes should not; habit-aware reverse scoring improves ranking of feasible pasts without rewriting the dynamics. The associated adaptation rule is to freeze a shared physics readout and update only a thin interface. On StackCube, DROID, and RH20T this rule improves low-shot transfer relative to training from scratch, retains cleaner dynamics under corrupted adaptation data, and extends from proprioception to pixel observations with multi-view and multi-step checks. We do not equate latent actions with operator habit, and we do not target large-scale video generation benchmarks.
Read the full abstract

Computer Vision

Novel Methods for Catheter and Guidewire Segmentation in X-ray Fluoroscopy under a Federated Learning Setting

Endovascular procedures rely on real-time manipulation of thin instruments, catheters and guidewires, under X-ray fluoroscopy guidance, where accurate visual analysis is essential for procedural safety. Learning-based methods are constrained by structural complexity, data scarcity, and privacy regulations precluding centralised training across institutions. This thesis presents a structure-aware federated learning framework for catheter and guidewire analysis, with four contributions evaluated on real-animal and phantom data. A benchmark dataset, CathAction, is introduced for catheterisation analysis, with over 600,000 annotated frames and 40,000 segmentation masks. A shape-sensitive loss transforms masks into signed distance maps compared in a structural feature space, improving Dice coefficient by up to 2.9 points across five backbones. This is extended to federated learning with shape-sensitive loss, preserving geometric consistency under heterogeneous client data and outperforming federated averaging by up to three points in mean intersection-over-union as clients scale from four to eight. Federated learning with projected gradient descent adds adversarial optimisation, raising mean intersection-over-union by over ten points on real-animal data. Finally, a structure-aware diffusion framework synthesises catheter and guidewire video sequences, combining structural supervision with a domain-adaptive reconstruction objective, reducing Frechet video distance over a strong baseline while maintaining visual fidelity. Incorporating synthetic sequences into federated training raises the Dice score from 44 to 51 percent under data scarcity, with gains across four held-out sites. Together, these contributions advance privacy-preserving catheter and guidewire analysis, supporting collaborative training without centralising patient data or large amounts of manual annotation.
Read the full abstract

Computer Vision · Cross-listed from eess.IV

MedGSSR: Generalizable Medical Image Super-Resolution 3D Reconstruction via Hierarchical Feed-forward Gaussian Splatting

High-resolution volumetric medical imaging is critical for clinical diagnosis, yet acquisition is often limited by scanner hardware, scan time, and for CT, radiation dose. Medical 3D Super-Resolution (Med3DSR) offers a computational alternative, but existing methods commonly rely on per-subject optimization, pretrained priors, or coordinate-based implicit representations, which compromise anatomical fidelity and limit efficiency. To address these limitations, we present MedGSSR, a fully end-to-end feed-forward framework that represents volumes as an explicit 3D Gaussian field for Med3DSR. Unlike coordinate-based implicit functions, our explicit 3D Gaussian representation naturally enhances signal continuity and local high-frequency fidelity. Specifically, MedGSSR explicitly decouples the reconstruction process into coarse-grained structural preservation and fine-grained textural refinement through the proposed Pyramid Anatomical Encoder and a Hierarchical Gaussian Projector. To support arbitrary-scale super-resolution, we introduce sub-voxel Gaussian decomposition and a Differentiable Gaussian Voxelizer that directly queries the continuous 3D intensity field, reducing discretization artifacts. Extensive experiments on MRI and CT benchmarks demonstrate that MedGSSR significantly outperforms state-of-the-art methods. Notably, our framework exhibits robust generalizability across unseen datasets without requiring per-subject optimization, enabling fast inference and high-fidelity volumetric super-resolution in practical clinical settings. Our project webpage, including code, is at https://william2ai.github.io/medgssr
Read the full abstract

All authors Chengkai Wang, Luoyu Hong, Yiting Zhao, Jiamin Wang, Xiang Feng, Feiwei Qin, Zhenzhong Kuang, Xuefei Yin, Ali Bashashati, Yanming Zhu

Computer Vision

Organization of Valence and Arousal in Vision-Language Representations of Built Environments: Insights from the EMOIS Dataset

Visual perception of built environments contributes to the affective impressions that people form in everyday life. However, how these impressions are represented within vision foundation models remains largely unexplored. To support the systematic investigation of this subject, we introduce the Emotional Impression of Spaces (EMOIS) dataset, comprising 1,544 real-world built-environment images. Each image is annotated with image-evoked valence and arousal ratings collected from Japanese adults by conducting a large-scale web-based survey, with approximately 120 ratings per image. Using Contrastive Language–Image Pre-training (CLIP) representations, we perform predictive and geometric analyses to systematically investigate how valence and arousal are encoded and organized within the representation space. These analyses reveal that valence exhibited stronger and more coherent organization than arousal. Cross-dataset analyses with the Open Affective Standardized Image Set (OASIS), a benchmark dataset of general affective photographs, reveal differences in affective organization between the two datasets. Regression analyses demonstrate high predictive performance for valence and arousal within EMOIS, with mean coefficients of determination of 0.865 and 0.807, respectively, across repeated internal hold-out evaluations. Finally, we present an example-based interface illustrating how learned representations can support qualitative interpretation of predicted affective values. These findings can help elucidate affective representations of built environments and establish EMOIS as a densely annotated resource for future affective computing research in this domain.
Read the full abstract

All authors Madoka Yonekura, Katsunori Kohda, Nobuhiko Muramoto, Takahiro Yamaguchi