Computer Vision
Papers
Fresh from arXiv, typeset properly. Highlighted words trade on the market.
Monday 27 October
Super resolution offers a way to harness medium even lowresolution but historically valuable remote sensing image archives. Generative models, especially diffusion models, have recently been applied to remote sensing super resolution (RSSR), yet several challenges exist. First, diffusion models are effective but require expensive training from scratch resources and have slow inference speeds. Second, current methods have limited utilization of auxiliary information as real-world constraints to reconstruct scientifically realistic images. Finally, most current methods lack evaluation on downstream tasks. In this study, we present a efficient LSSR framework for RSSR, supported by a new multimodal dataset of paired 30 m Landsat 8 and 10 m Sentinel 2 imagery. Built on frozen pretrained Stable Diffusion, LSSR integrates crossmodal attention with auxiliary knowledge (Digital Elevation Model, land cover, month) and Synthetic Aperture Radar guidance, enhanced by adapters and a tailored Fourier NDVI loss to balance spatial details and spectral fidelity. Extensive experiments demonstrate that LSSR significantly improves crop boundary delineation and recovery, achieving state-of-the-art performance with Peak Signal-to-Noise Ratio/Structural Similarity Index Measure of 32.63/0.84 (RGB) and 23.99/0.78 (IR), and the lowest NDVI Mean Squared Error (0.042), while maintaining efficient inference (0.39 sec/image). Moreover, LSSR transfers effectively to NASA Harmonized Landsat and Sentinel (HLS) super resolution, yielding more reliable crop classification (F1: 0.86) than Sentinel-2 (F1: 0.85). These results highlight the potential of RSSR to advance precision agriculture.
Computer Vision
PlanarTrack: A high-quality and challenging benchmark for large-scale planar object tracking
Planar tracking has drawn increasing interest owing to its key roles in robotics and augmented reality. Despite recent great advancement, further development of planar tracking, particularly in the deep learning era, is largely limited compared to generic tracking due to the lack of large-scale platforms. To mitigate this, we propose PlanarTrack, a large-scale high-quality and challenging benchmark for planar tracking. Specifically, PlanarTrack consists of 1,150 sequences with over 733K frames, including 1,000 short-term and 150 new long-term videos, which enables comprehensive evaluation of short- and long-term tracking performance. All videos in PlanarTrack are recorded in unconstrained conditions from the wild, which makes PlanarTrack challenging but more realistic for real-world applications. To ensure high-quality annotations, each video frame is manually annotated by four corner points with multi-round meticulous inspection and refinement. To enhance target diversity of PlanarTrack, we only capture a unique target in one sequence, which is different from existing benchmarks. To our best knowledge, PlanarTrack is by far the largest and most diverse and challenging dataset dedicated to planar tracking. To understand performance of existing methods on PlanarTrack and to provide a comparison for future research, we evaluate 10 representative planar trackers with extensive comparison and in-depth analysis. Our evaluation reveals that, unsurprisingly, the top planar trackers heavily degrade on the challenging PlanarTrack, which indicates more efforts are required for improving planar tracking. Our data and results will be released at https://github.com/HengLan/PlanarTrack
Read the full abstract
Computer Vision
Interpretable Tile-Based Classification of Paclitaxel Exposure
Medical image analysis is central to drug discovery and preclinical evaluation, where scalable, objective readouts can accelerate decision-making. We address classification of paclitaxel (Taxol) exposure from phase-contrast microscopy of C6 glioma cells – a task with subtle dose differences that challenges full-image models. We propose a simple tiling-and-aggregation pipeline that operates on local patches and combines tile outputs into an image label, achieving state-of-the-art accuracy on the benchmark dataset and improving over the published baseline by around 20 percentage points, with trends confirmed by cross-validation. To understand why tiling is effective, we further apply Grad-CAM and Score-CAM and attention analyses, which enhance model interpretability and point toward robustness-oriented directions for future medical image research. Code is released to facilitate reproduction and extension.
Read the full abstract
Computer Vision
Multitask Multimodal Self-Supervised Learning for Medical Images
This thesis works to address a pivotal challenge in medical image analysis: the reliance on extensive labeled datasets, which are often limited due to the need for expert annotation and constrained by privacy and legal issues. By focusing on the development of self-supervised learning techniques and domain adaptation methods, this research aims to circumvent these limitations, presenting a novel approach to enhance the utility and efficacy of deep learning in medical imaging. Central to this thesis is the development of the Medformer, an innovative neural network architecture designed for multitask learning and deep domain adaptation. This model is adept at pre-training on diverse medical image datasets, handling varying sizes and modalities, and is equipped with a dynamic input-output adaptation mechanism. This enables efficient processing and integration of a wide range of medical image types, from 2D X-rays to complex 3D MRIs, thus mitigating the dependency on large labeled datasets. Further, the thesis explores the current state of self-supervised learning in medical imaging. It introduces novel pretext tasks that are capable of extracting meaningful information from unlabeled data, significantly advancing the model's interpretative abilities. This approach is validated through rigorous experimentation, including the use of the MedMNIST dataset, demonstrating the model's proficiency in learning generalized features applicable to various downstream tasks. In summary, this thesis contributes to the advancement of medical image analysis by offering a scalable, adaptable framework that reduces reliance on labeled data. It paves the way for more accurate, efficient diagnostic tools in healthcare, signifying a major step forward in the application of deep learning in medical imaging.
Read the full abstract
Computer Vision
ReconViaGen: Towards Accurate Multi-view 3D Object Reconstruction via Generation
Existing multi-view 3D object reconstruction methods heavily rely on sufficient overlap between input views, where occlusions and sparse coverage in practice frequently yield severe reconstruction incompleteness. Recent advancements in diffusion-based 3D generative techniques offer the potential to address these limitations by leveraging learned generative priors to hallucinate invisible parts of objects, thereby generating plausible 3D structures. However, the stochastic nature of the inference process limits the accuracy and reliability of generation results, preventing existing reconstruction frameworks from integrating such 3D generative priors. In this work, we comprehensively analyze the reasons why diffusion-based 3D generative methods fail to achieve high consistency, including (a) the insufficiency in constructing and leveraging cross-view connections when extracting multi-view image features as conditions, and (b) the poor controllability of iterative denoising during local detail generation, which easily leads to plausible but inconsistent fine geometric and texture details with inputs. Accordingly, we propose ReconViaGen to innovatively integrate reconstruction priors into the generative framework and devise several strategies that effectively address these issues. Extensive experiments demonstrate that our ReconViaGen can reconstruct complete and accurate 3D models consistent with input views in both global structure and local details.Project page: https://jiahao620.github.io/reconviagen.
Read the full abstract
Computer Vision
MDReID: Modality-Decoupled Learning for Any-to-Any Multi-Modal Object Re-Identification
Real-world object re-identification (ReID) systems often face modality inconsistencies, where query and gallery images come from different sensors (e.g., RGB, NIR, TIR). However, most existing methods assume modality-matched conditions, which limits their robustness and scalability in practical applications. To address this challenge, we propose MDReID, a flexible any-to-any image-level ReID framework designed to operate under both modality-matched and modality-mismatched scenarios. MDReID builds on the insight that modality information can be decomposed into two components: modality-shared features that are predictable and transferable, and modality-specific features that capture unique, modality-dependent characteristics. To effectively leverage this, MDReID introduces two key components: the Modality Decoupling Learning (MDL) and Modality-aware Metric Learning (MML). Specifically, MDL explicitly decomposes modality features into modality-shared and modality-specific representations, enabling effective retrieval in both modality-aligned and mismatched scenarios. MML, a tailored metric learning strategy, further enforces orthogonality and complementarity between the two components to enhance discriminative power across modalities. Extensive experiments conducted on three challenging multi-modality ReID benchmarks (RGBNT201, RGBNT100, MSVR310) consistently demonstrate the superiority of MDReID. Notably, MDReID achieves significant mAP improvements of 9.8%, 3.0%, and 11.5% in general modality-matched scenarios, and average gains of 3.4%, 11.8%, and 10.9% in modality-mismatched scenarios, respectively. The code is available at: \textcolor{magenta}{https://github.com/stone96123/MDReID}.
Read the full abstract
Computer Vision
MMSD3.0: A Multi-Image Benchmark for Real-World Multimodal Sarcasm Detection
Despite progress in multimodal sarcasm detection, existing datasets and methods predominantly focus on single-image scenarios, overlooking potential semantic and affective relations across multiple images. This leaves a gap in modeling cases where sarcasm is triggered by multi-image cues in real-world settings. To bridge this gap, we introduce MMSD3.0, a new benchmark composed entirely of multi-image samples curated from tweets and Amazon reviews. We further propose the Cross-Image Reasoning Model (CIRM), which performs targeted cross-image sequence modeling to capture latent inter-image connections. In addition, we introduce a relevance-guided, fine-grained cross-modal fusion mechanism based on text-image correspondence to reduce information loss during integration. We establish a comprehensive suite of strong and representative baselines and conduct extensive experiments, showing that MMSD3.0 is an effective and reliable benchmark that better reflects real-world conditions. Moreover, CIRM demonstrates state-of-the-art performance across MMSD, MMSD2.0 and MMSD3.0, validating its effectiveness in both single-image and multi-image scenarios. Dataset and code are publicly available at https://github.com/ZHCMOONWIND/MMSD3.0.
Read the full abstract
Computer Vision
Adaptive Stochastic Coefficients for Accelerating Diffusion Sampling
Diffusion-based generative processes, formulated as differential equation solving, frequently balance computational speed with sample quality. Our theoretical investigation of ODE- and SDE-based solvers reveals complementary weaknesses: ODE solvers accumulate irreducible gradient error along deterministic trajectories, while SDE methods suffer from amplified discretization errors when the step budget is limited. Building upon this insight, we introduce AdaSDE, a novel single-step SDE solver that aims to unify the efficiency of ODEs with the error resilience of SDEs. Specifically, we introduce a single per-step learnable coefficient, estimated via lightweight distillation, which dynamically regulates the error correction strength to accelerate diffusion sampling. Notably, our framework can be integrated with existing solvers to enhance their capabilities. Extensive experiments demonstrate state-of-the-art performance: at 5 NFE, AdaSDE achieves FID scores of 4.18 on CIFAR-10, 8.05 on FFHQ and 6.96 on LSUN Bedroom. Codes are available in https://github.com/WLU-wry02/AdaSDE.
Read the full abstract
Computer Vision
hYOLO Model: Enhancing Object Classification with Hierarchical Context in YOLOv8
Current convolution neural network (CNN) classification methods are predominantly focused on flat classification which aims solely to identify a specified object within an image. However, real-world objects often possess a natural hierarchical organization that can significantly help classification tasks. Capturing the presence of relations between objects enables better contextual understanding as well as control over the severity of mistakes. Considering these aspects, this paper proposes an end-to-end hierarchical model for image detection and classification built upon the YOLO model family. A novel hierarchical architecture, a modified loss function, and a performance metric tailored to the hierarchical nature of the model are introduced. The proposed model is trained and evaluated on two different hierarchical categorizations of the same dataset: a systematic categorization that disregards visual similarities between objects and a categorization accounting for common visual characteristics across classes. The results illustrate how the suggested methodology addresses the inherent hierarchical structure present in real-world objects, which conventional flat classification algorithms often overlook.
Read the full abstract
Computer Vision
A Video Is Not Worth a Thousand Words
As we become increasingly dependent on vision language models (VLMs) to answer questions about the world around us, there is a significant amount of research devoted to increasing both the difficulty of video question answering (VQA) datasets, and the context lengths of the models that they evaluate. The reliance on large language models as backbones has lead to concerns about potential text dominance, and the exploration of interactions between modalities is underdeveloped. How do we measure whether we're heading in the right direction, with the complexity that multi-modal models introduce? We propose a joint method of computing both feature attributions and modality scores based on Shapley values, where both the features and modalities are arbitrarily definable. Using these metrics, we compare $6$ VLM models of varying context lengths on $4$ representative datasets, focusing on multiple-choice VQA. In particular, we consider video frames and whole textual elements as equal features in the hierarchy, and the multiple-choice VQA task as an interaction between three modalities: video, question and answer. Our results demonstrate a dependence on text and show that the multiple-choice VQA task devolves into a model's ability to ignore distractors. Code available at https://github.com/sjpollard/a-video-is-not-worth-a-thousand-words.
Read the full abstract
Computer Vision
Progressive Growing of Patch Size: Curriculum Learning for Accelerated and Improved Medical Image Segmentation
In this work, we introduce Progressive Growing of Patch Size, an automatic curriculum learning approach for 3D medical image segmentation. Our approach progressively increases the patch size during model training, resulting in an improved class balance for smaller patch sizes and accelerated convergence of the training process. We evaluate our curriculum approach in two settings: a resource-efficient mode and a performance mode, both regarding Dice score performance and computational costs across 15 diverse and popular 3D medical image segmentation tasks. The resource-efficient mode matches the Dice score performance of the conventional constant patch size sampling baseline with a notable reduction in training time to only 44%. The performance mode improves upon constant patch size segmentation results, achieving a statistically significant relative mean performance gain of 1.28% in Dice Score. Remarkably, across all 15 tasks, our proposed performance mode manages to surpass the constant patch size baseline in Dice Score performance, while simultaneously reducing training time to only 89%. The benefits are particularly pronounced for highly imbalanced tasks such as lesion segmentation tasks. Rigorous experiments demonstrate that our performance mode not only improves mean segmentation performance but also reduces performance variance, yielding more trustworthy model comparison. Furthermore, our findings reveal that the proposed curriculum sampling is not tied to a specific architecture but represents a broadly applicable strategy that consistently boosts performance across diverse segmentation models, including UNet, UNETR, and SwinUNETR. In summary, we show that this simple yet elegant transformation on input data substantially improves both Dice Score performance and training runtime, while being compatible across diverse segmentation backbones.
Read the full abstract
Computer Vision
Autoregressive Styled Text Image Generation, but Make it Reliable
Generating faithful and readable styled text images (especially for Styled Handwritten Text generation - HTG) is an open problem with several possible applications across graphic design, document understanding, and image editing. A lot of research effort in this task is dedicated to developing strategies that reproduce the stylistic characteristics of a given writer, with promising results in terms of style fidelity and generalization achieved by the recently proposed Autoregressive Transformer paradigm for HTG. However, this method requires additional inputs, lacks a proper stop mechanism, and might end up in repetition loops, generating visual artifacts. In this work, we rethink the autoregressive formulation by framing HTG as a multimodal prompt-conditioned generation task, and tackle the content controllability issues by introducing special textual input tokens for better alignment with the visual ones. Moreover, we devise a Classifier-Free-Guidance-based strategy for our autoregressive model. Through extensive experimental validation, we demonstrate that our approach, dubbed Eruku, compared to previous solutions requires fewer inputs, generalizes better to unseen styles, and follows more faithfully the textual prompt, improving content adherence.
Read the full abstract
Computer Vision
Through the Lens: Benchmarking Deepfake Detectors Against Moiré-Induced Distortions
Deepfake detection remains a pressing challenge, particularly in real-world settings where smartphone-captured media from digital screens often introduces Moiré artifacts that can distort detection outcomes. This study systematically evaluates state-of-the-art (SOTA) deepfake detectors on Moiré-affected videos, an issue that has received little attention. We collected a dataset of 12,832 videos, spanning 35.64 hours, from the Celeb-DF, DFD, DFDC, UADFV, and FF++ datasets, capturing footage under diverse real-world conditions, including varying screens, smartphones, lighting setups, and camera angles. To further examine the influence of Moiré patterns on deepfake detection, we conducted additional experiments using our DeepMoiréFake, referred to as (DMF) dataset and two synthetic Moiré generation techniques. Across 15 top-performing detectors, our results show that Moiré artifacts degrade performance by as much as 25.4%, while synthetically generated Moiré patterns lead to a 21.4% drop in accuracy. Surprisingly, demoiréing methods, intended as a mitigation approach, instead worsened the problem, reducing accuracy by up to 17.2%. These findings underscore the urgent need for detection models that can robustly handle Moiré distortions alongside other realworld challenges, such as compression, sharpening, and blurring. By introducing the DMF dataset, we aim to drive future research toward closing the gap between controlled experiments and practical deepfake detection.
Read the full abstract
Computer Vision
Accurate and Scalable Multimodal Pathology Retrieval via Attentive Vision-Language Alignment
The rapid digitization of histopathology slides has opened new opportunities for computational tools in clinical and research workflows. Content-based slide retrieval can help pathologists identify morphologically and semantically related precedent cases, supporting expert diagnosis and example-based education. Effective retrieval of whole-slide images (WSIs), however, remains challenging because gigapixel slides contain abundant irrelevant content, focal diagnostic patterns and slide-level semantic information that must be represented at a practicable search cost. Here we present PathSearch, a retrieval framework that combines fine-grained attentive mosaics with slide-level embeddings aligned through vision-language contrastive learning. Trained on 6,926 slide-report pairs, PathSearch captures both fine-grained morphological cues and high-level semantic patterns to enable accurate and flexible retrieval. The framework supports two key functionalities: (1) mosaic-based image-to-image (I2I) retrieval, ensuring accurate and efficient slide search; and (2) multimodal retrieval, where text queries can directly retrieve relevant slides. PathSearch was evaluated on eight tasks comprising 5,021 evaluation slides, spanning malignancy assessment on frozen and hematoxylin and eosin (H&E)-stained slides, lymph-node metastasis detection, tumor subtyping, mixed-gallery rare-cancer retrieval, and hepatocellular carcinoma (HCC) risk stratification. Internal and external experimental results demonstrate that PathSearch consistently outperforms the strongest existing methods without compromising multimodal accuracy. A multi-center reader study further demonstrated increases in task-level mean diagnostic accuracy, confidence, and inter-observer agreement with PathSearch's support. Together, these results support the effectiveness of PathSearch across diverse retrieval tasks and evaluation settings.
Read the full abstract
Computer Vision
VR-Drive: Viewpoint-Robust End-to-End Driving with Feed-Forward 3D Gaussian Splatting
End-to-end autonomous driving (E2E-AD) has emerged as a promising paradigm that unifies perception, prediction, and planning into a holistic, data-driven framework. However, achieving robustness to varying camera viewpoints, a common real-world challenge due to diverse vehicle configurations, remains an open problem. In this work, we propose VR-Drive, a novel E2E-AD framework that addresses viewpoint generalization by jointly learning 3D scene reconstruction as an auxiliary task to enable planning-aware view synthesis. Unlike prior scene-specific synthesis approaches, VR-Drive adopts a feed-forward inference strategy that supports online training-time augmentation from sparse views without additional annotations. To further improve viewpoint consistency, we introduce a viewpoint-mixed memory bank that facilitates temporal interaction across multiple viewpoints and a viewpoint-consistent distillation strategy that transfers knowledge from original to synthesized views. Trained in a fully end-to-end manner, VR-Drive effectively mitigates synthesis-induced noise and improves planning under viewpoint shifts. In addition, we release a new benchmark dataset to evaluate E2E-AD performance under novel camera viewpoints, enabling comprehensive analysis. Our results demonstrate that VR-Drive is a scalable and robust solution for the real-world deployment of end-to-end autonomous driving systems.
Read the full abstract
Computer Vision
DecoDINO: 3D Human-Scene Contact Prediction with Semantic Classification
Accurate vertex-level contact prediction between humans and surrounding objects is a prerequisite for high fidelity human object interaction models used in robotics, AR/VR, and behavioral simulation. DECO was the first in the wild estimator for this task but is limited to binary contact maps and struggles with soft surfaces, occlusions, children, and false-positive foot contacts. We address these issues and introduce DecoDINO, a three-branch network based on DECO's framework. It uses two DINOv2 ViT-g/14 encoders, class-balanced loss weighting to reduce bias, and patch-level cross-attention for improved local reasoning. Vertex features are finally passed through a lightweight MLP with a softmax to assign semantic contact labels. We also tested a vision-language model (VLM) to integrate text features, but the simpler architecture performed better and was used instead. On the DAMON benchmark, DecoDINO (i) raises the binary-contact F1 score by 7$\%$, (ii) halves the geodesic error, and (iii) augments predictions with object-level semantic labels. Ablation studies show that LoRA fine-tuning and the dual encoders are key to these improvements. DecoDINO outperformed the challenge baseline in both tasks of the DAMON Challenge. Our code is available at https://github.com/DavidePasero/deco/tree/main.
Read the full abstract
Computer Vision
Evaluation of Vision-LLMs in Surveillance Video
The widespread use of cameras in our society has created an overwhelming amount of video data, far exceeding the capacity for human monitoring. This presents a critical challenge for public safety and security, as the timely detection of anomalous or criminal events is crucial for effective response and prevention. The ability for an embodied agent to recognize unexpected events is fundamentally tied to its capacity for spatial reasoning. This paper investigates the spatial reasoning of vision-language models (VLMs) by framing anomalous action recognition as a zero-shot, language-grounded task, addressing the embodied perception challenge of interpreting dynamic 3D scenes from sparse 2D video. Specifically, we investigate whether small, pre-trained vision–LLMs can act as spatially-grounded, zero-shot anomaly detectors by converting video into text descriptions and scoring labels via textual entailment. We evaluate four open models on UCF-Crime and RWF-2000 under prompting and privacy-preserving conditions. Few-shot exemplars can improve accuracy for some models, but may increase false positives, and privacy filters – especially full-body GAN transforms – introduce inconsistencies that degrade accuracy. These results chart where current vision–LLMs succeed (simple, spatially salient events) and where they falter (noisy spatial cues, identity obfuscation). Looking forward, we outline concrete paths to strengthen spatial grounding without task-specific training: structure-aware prompts, lightweight spatial memory across clips, scene-graph or 3D-pose priors during description, and privacy methods that preserve action-relevant geometry. This positions zero-shot, language-grounded pipelines as adaptable building blocks for embodied, real-world video understanding. Our implementation for evaluating VLMs is publicly available at: https://github.com/pascalbenschopTU/VLLM_AnomalyRecognition
Read the full abstract
Computer Vision
Finding 3D Scene Analogies with Multimodal Foundation Models
Connecting current observations with prior experiences helps robots adapt and plan in new, unseen 3D environments. Recently, 3D scene analogies have been proposed to connect two 3D scenes, which are smooth maps that align scene regions with common spatial relationships. These maps enable detailed transfer of trajectories or waypoints, potentially supporting demonstration transfer for imitation learning or task plan transfer across scenes. However, existing methods for the task require additional training and fixed object vocabularies. In this work, we propose to use multimodal foundation models for finding 3D scene analogies in a zero-shot, open-vocabulary setting. Central to our approach is a hybrid neural representation of scenes that consists of a sparse graph based on vision-language model features and a feature field derived from 3D shape foundation models. 3D scene analogies are then found in a coarse-to-fine manner, by first aligning the graph and refining the correspondence with feature fields. Our method can establish accurate correspondences between complex scenes, and we showcase applications in trajectory and waypoint transfer.
Read the full abstract
Computer Vision
AG-Fusion: adaptive gated multimodal fusion for 3d object detection in complex scenes
Multimodal camera-LiDAR fusion technology has found extensive application in 3D object detection, demonstrating encouraging performance. However, existing methods exhibit significant performance degradation in challenging scenarios characterized by sensor degradation or environmental disturbances. We propose a novel Adaptive Gated Fusion (AG-Fusion) approach that selectively integrates cross-modal knowledge by identifying reliable patterns for robust detection in complex scenes. Specifically, we first project features from each modality into a unified BEV space and enhance them using a window-based attention mechanism. Subsequently, an adaptive gated fusion module based on cross-modal attention is designed to integrate these features into reliable BEV representations robust to challenging environments. Furthermore, we construct a new dataset named Excavator3D (E3D) focusing on challenging excavator operation scenarios to benchmark performance in complex conditions. Our method not only achieves competitive performance on the standard KITTI dataset with 93.92% accuracy, but also significantly outperforms the baseline by 24.88% on the challenging E3D dataset, demonstrating superior robustness to unreliable modal information in complex industrial scenes.
Read the full abstract
Computer Vision
Implicit Modeling for Transferability Estimation of Vision Foundation Models
Transferability estimation identifies the best pre-trained models for downstream tasks without incurring the high computational cost of full fine-tuning. This capability facilitates deployment and advances the pre-training and fine-tuning paradigm. However, existing methods often struggle to accurately assess transferability for emerging pre-trained models with diverse architectures, training strategies, and task alignments. In this work, we propose Implicit Transferability Modeling (ITM), a novel framework that implicitly models each model's intrinsic transferability, coupled with a Divide-and-Conquer Variational Approximation (DVA) strategy to efficiently approximate embedding space evolution. This design enables generalization across a broader range of models and downstream tasks. Extensive experiments on a comprehensive benchmark–spanning extensive training regimes and a wider variety of model types–demonstrate that ITM consistently outperforms existing methods in terms of stability, effectiveness, and efficiency.
Read the full abstract
Computer Vision
DQ3D: Depth-guided Query for Transformer-Based 3D Object Detection in Traffic Scenarios
3D object detection from multi-view images in traffic scenarios has garnered significant attention in recent years. Many existing approaches rely on object queries that are generated from 3D reference points to localize objects. However, a limitation of these methods is that some reference points are often far from the target object, which can lead to false positive detections. In this paper, we propose a depth-guided query generator for 3D object detection (DQ3D) that leverages depth information and 2D detections to ensure that reference points are sampled from the surface or interior of the object. Furthermore, to address partially occluded objects in current frame, we introduce a hybrid attention mechanism that fuses historical detection results with depth-guided queries, thereby forming hybrid queries. Evaluation on the nuScenes dataset demonstrates that our method outperforms the baseline by 6.3% in terms of mean Average Precision (mAP) and 4.3% in the NuScenes Detection Score (NDS).
Read the full abstract
Computer Vision
Fast Voxel-Wise Kinetic Modeling in Dynamic PET using a Physics-Informed CycleGAN
Tracer kinetic modeling serves a vital role in diagnosis, treatment planning, tracer development and oncology, but burdens practitioners with complex and invasive arterial input function estimation (AIF). We adopt a physics-informed CycleGAN showing promise in DCE-MRI quantification to dynamic PET quantification. Our experiments demonstrate sound AIF predictions and parameter maps closely resembling the reference.
Read the full abstract
Computer Vision
Note on the Construction of Structure Tensor
This note presents a theoretical discussion of two structure tensor constructions: one proposed by Bigun and Granlund 1987, and the other by Granlund and Knutsson 1995. At first glance, these approaches may appear quite different–the former is implemented by averaging outer products of gradient filter responses, while the latter constructs the tensor from weighted outer products of tune-in frequency vectors of quadrature filters. We argue that when both constructions are viewed through the common lens of Total Least Squares (TLS) line fitting to the power spectrum, they can be reconciled to a large extent, and additional benefits emerge. From this perspective, the correction term introduced in Granlund and Knutsson 1995 becomes unnecessary. Omitting it ensures that the resulting tensor remains positive semi-definite, thereby simplifying the interpretation of its eigenvalues. Furthermore, this interpretation allows fitting more than a single 0rientation to the input by reinterpreting quadrature filter responses without relying on a structure tensor. It also removes the constraint that responses must originate strictly from quadrature filters, allowing the use of alternative filter types and non-angular tessellations. These alternatives include Gabor filters–which, although not strictly quadrature, are still suitable for structure tensor construction–even when they tessellate the spectrum in a Cartesian fashion, provided they are sufficiently concentrated.
Read the full abstract
Computer Vision
DeepSalt: Bridging Laboratory and Satellite Spectra through Domain Adaptation and Knowledge Distillation for Large-Scale Soil Salinity Estimation
Soil salinization poses a significant threat to both ecosystems and agriculture because it limits plants' ability to absorb water and, in doing so, reduces crop productivity. This phenomenon alters the soil's spectral properties, creating a measurable relationship between salinity and light reflectance that enables remote monitoring. While laboratory spectroscopy provides precise measurements, its reliance on in-situ sampling limits scalability to regional or global levels. Conversely, hyperspectral satellite imagery enables wide-area observation but lacks the fine-grained interpretability of laboratory instruments. To bridge this gap, we introduce DeepSalt, a deep-learning-based spectral transfer framework that leverages knowledge distillation and a novel Spectral Adaptation Unit to transfer high-resolution spectral insights from laboratory-based spectroscopy to satellite-based hyperspectral sensing. Our approach eliminates the need for extensive ground sampling while enabling accurate, large-scale salinity estimation, as demonstrated through comprehensive empirical benchmarks. DeepSalt achieves significant performance gains over methods without explicit domain adaptation, underscoring the impact of the proposed Spectral Adaptation Unit and the knowledge distillation strategy. The model also effectively generalized to unseen geographic regions, explaining a substantial portion of the salinity variance.
Read the full abstract
Computer Vision
Quantizing Space and Time: Fusing Time Series and Images for Earth Observation
We propose a task-agnostic framework for multimodal fusion of time series and single timestamp images, enabling cross-modal generation and robust downstream performance. Our approach explores deterministic and learned strategies for time series quantization and then leverages a masked correlation learning objective, aligning discrete image and time series tokens in a unified representation space. Instantiated in the Earth observation domain, the pretrained model generates consistent global temperature profiles from satellite imagery and is validated through counterfactual experiments. Across downstream tasks, our task-agnostic pretraining outperforms task-specific fusion by 6% in R^2 and 2% in RMSE on average, and exceeds baseline methods by 50% in R^2 and 12% in RMSE. Finally, we analyze gradient sensitivity across modalities, providing insights into model robustness. Code, data, and weights will be released under a permissive license.
Read the full abstract
Computer Vision · Cross-listed from cs.LG
Seeing Structural Failure Before it Happens: An Image-Based Physics-Informed Neural Network (PINN) for Spaghetti Bridge Load Prediction
Physics Informed Neural Networks (PINNs) are gaining attention for their ability to embed physical laws into deep learning models, which is particularly useful in structural engineering tasks with limited data. This paper aims to explore the use of PINNs to predict the weight of small scale spaghetti bridges, a task relevant to understanding load limits and potential failure modes in simplified structural models. Our proposed framework incorporates physics-based constraints to the prediction model for improved performance. In addition to standard PINNs, we introduce a novel architecture named Physics Informed Kolmogorov Arnold Network (PIKAN), which blends universal function approximation theory with physical insights. The structural parameters provided as input to the model are collected either manually or through computer vision methods. Our dataset includes 15 real bridges, augmented to 100 samples, and our best model achieves an $R^2$ score of 0.9603 and a mean absolute error (MAE) of 10.50 units. From applied perspective, we also provide a web based interface for parameter entry and prediction. These results show that PINNs can offer reliable estimates of structural weight, even with limited data, and may help inform early stage failure analysis in lightweight bridge designs. The complete data and code are available at https://github.com/OmerJauhar/PINNS-For-Spaghetti-Bridges.
Read the full abstract
Computer Vision
Residual Diffusion Bridge Model for Image Restoration
Diffusion bridge models establish probabilistic paths between arbitrary paired distributions and exhibit great potential for universal image restoration. Most existing methods merely treat them as simple variants of stochastic interpolants, lacking a unified analytical perspective. Besides, they indiscriminately reconstruct images through global noise injection and removal, inevitably distorting undegraded regions due to imperfect reconstruction. To address these challenges, we propose the Residual Diffusion Bridge Model (RDBM). Specifically, we theoretically reformulate the stochastic differential equations of generalized diffusion bridge and derive the analytical formulas of its forward and reverse processes. Crucially, we leverage the residuals from given distributions to modulate the noise injection and removal, enabling adaptive restoration of degraded regions while preserving intact others. Moreover, we unravel the fundamental mathematical essence of existing bridge models, all of which are special cases of RDBM and empirically demonstrate the optimality of our proposed models. Extensive experiments are conducted to demonstrate the state-of-the-art performance of our method both qualitatively and quantitatively across diverse image restoration tasks. Code is publicly available at https://github.com/MiliLab/RDBM.
Read the full abstract
Computer Vision
Revisiting Multimodal Positional Encoding in Vision-Language Models
Multimodal position encoding is essential for vision-language models, yet there has been little systematic investigation into multimodal position encoding. We conduct a comprehensive analysis of multimodal Rotary Positional Embedding (RoPE) by examining its two core components: position design and frequency allocation. Through extensive experiments, we identify three key guidelines: positional coherence, full frequency utilization, and preservation of textual priors-ensuring unambiguous layout, rich representation, and faithful transfer from the pre-trained LLM. Based on these insights, we propose Multi-Head RoPE (MHRoPE) and MRoPE-Interleave (MRoPE-I), two simple and plug-and-play variants that require no architectural changes. Our methods consistently outperform existing approaches across diverse benchmarks, with significant improvements in both general and fine-grained multimodal understanding. Code will be avaliable at https://github.com/JJJYmmm/Multimodal-RoPEs.
Read the full abstract
Computer Vision
EndoWave: 4D Gaussian Splatting with Rational Wavelet for Endoscopic Reconstruction
In robot-assisted minimally invasive surgery, accurate 3D reconstruction from endoscopic video is vital for downstream tasks and improved outcomes. However, endoscopic scenarios present unique challenges, including photometric inconsistencies, non-rigid tissue motion, and view-dependent highlights. Most 3DGS-based methods that rely solely on appearance constraints for optimizing 3DGS are often insufficient in this context, as these dynamic visual artifacts can mislead the optimization process and lead to inaccurate reconstructions. To address these limitations, we present EndoWave, a unified spatio-temporal Gaussian Splatting framework by incorporating an optical flow-based geometric constraint and a multi-resolution rational wavelet supervision. First, we adopt a unified spatio-temporal Gaussian representation that directly optimizes primitives in a 4D domain. Second, we propose a geometric constraint derived from optical flow to enhance temporal coherence and effectively constrain the 3D structure of the scene. Third, we propose a multi-resolution rational orthogonal wavelet as a constraint, which can effectively separate the details of the endoscope and enhance the rendering performance. Extensive evaluations on two real surgical datasets, EndoNeRF and StereoMIS, demonstrate that our method EndoWave achieves state-of-the-art reconstruction quality and visual accuracy compared to the baseline method.
Read the full abstract
Computer Vision
Strategies for Robust Deep Learning Based Deformable Registration
Deep learning based deformable registration methods have become popular in recent years. However, their ability to generalize beyond training data distribution can be poor, significantly hindering their usability. LUMIR brain registration challenge for Learn2Reg 2025 aims to advance the field by evaluating the performance of the registration on contrasts and modalities different from those included in the training set. Here we describe our submission to the challenge, which proposes a very simple idea for significantly improving robustness by transforming the images into MIND feature space before feeding them into the model. In addition, a special ensembling strategy is proposed that shows a small but consistent improvement.