Robotics
Papers
Fresh from arXiv, typeset properly. Highlighted words trade on the market.
Monday 14 September
Quadrotor navigation in cluttered 3-D environments requires global guidance while local motion remains subject to collision and motion limits. Harmonic potentials provide dense guidance from a global boundary value problem, but coupling a volumetric harmonic field to constrained physical quadrotor motion remains an open experimental problem. We couple a precomputed volumetric harmonic field with a constrained predictive planner that queries the field at predicted positions instead of extracting a global reference path. In Structured 3-D tests, harmonic guidance yields larger minimum clearance and lower RMS jerk than matched Dijkstra guidance, at the cost of longer paths; the same pattern remains when both methods use the same passage. Long maze tests span routes far beyond one prediction horizon, and Crazyflie trials validate physical execution. To the best of our knowledge, this is the first physical quadrotor demonstration of volumetric harmonic field navigation. The results show that globally constructed harmonic guidance can directly support local constrained motion generation on a physical quadrotor.
Robotics
Tracking the Ground: Online Lidar Identification of Robot-Induced Soil Deformation in Agricultural Environments
Agriculture faces many challenges, and robotic systems can play an important role in addressing them by improving the efficiency and sustainability of field operations. Among these challenges, preserving soil health is a critical concern, as vehicle-soil interactions can degrade the soil structure and produce unwanted surface deformation. A key step toward soil-aware robotics is to explicitly account for how vehicle traffic deforms the ground, yet soil state is typically not treated as a variable. We address this gap by proposing a framework to quantify traffic-induced soil deformation and estimate its evolution online from lidar observations. The method relies on a reduced-order parametric model that represents the soil behavior via physically interpretable parameters, yielding a continuously updated and observable representation of soil state. Experiments conducted in different soil conditions demonstrate the ability of the approach to capture deformation induced by the robot. By making soil response measurable and interpretable during operation, the proposed framework establishes a basis for soil-aware robotic operation, in which the estimated state can be exploited to adapt robotic behaviors in order to reduce soil degradation.
Read the full abstract
Robotics
Flow-Matched Motion Priors: Online Optimal-Transport Rewards for Imitation Learning
Learning a motion prior requires a reward that guides a policy from its current behavior toward demonstrated motion. Adversarial Motion Priors (AMP) provide such a reward with a discriminator. However, adversarial objectives can become uninformative when policy and expert supports are far apart. A naive use of optimal transport (OT) averages matched expert successors into a barycentric target. Averaging across gait phases can weaken the target's joint motion. We introduce Flow-Matched Motion Priors (FMP), an online scalar reward learned from paths connecting current rollout histories to an expert motion bank. Entropic OT supplies the coupling. Before each policy update, we train a neural potential with flow matching (FM) along the rollout-to-expert paths, endpoint-gradient supervision, and relative-value calibration. The actor receives only physical observations and the reward remains a scalar, as in AMP. Controlled reward-model experiments show substantially better generalization beyond the fitting rollout than value-only or endpoint-only fitting. On Unitree G1, matched 50-million-transition experiments compare FMP with AMP, a barycentric OT reward, and nested ablations under demonstration and fixed-pose initialization. FMP produces stable forward walking at 0.727 m/s from demonstration resets and 0.338 m/s from a fixed default pose. In the fixed-pose condition, it incurs 129 falls versus 243 for the endpoint-only control. Against a static score-gradient teacher, dynamic FM reduces score-increment error at interpolation fractions 0.25 and 0.50 while using 29% less offline fitting time.
Read the full abstract
Robotics
An Information-Space Perspective to Scene Graph Sufficiency for Robotic Task Planning
Planning in complex environments requires task specifications grounded in representations that capture objects, relations, and affordances; scene graphs meet this need, but their size in large environments hinders efficient planning. While task-aware pruning and hierarchical abstractions have been explored, a general, task-centric formalization of what constitutes a sufficient scene graph for planning remains open. This paper provides such a formalization by modeling planning over scene graphs within an information-spaces framework through the definition of scene graph transition systems and relevant action semantics for navigation and manipulation. We then introduce derived scene graphs via information mappings that merge and prune nodes and induce quotient transition systems augmented with motion primitives to capture higher-level actions over merged graph nodes. Sufficiency is characterized by two conditions: (i) the information mapping yields a deterministic quotient, and (ii) the task is well-posed over derived traces, ensuring plans found on the derived model are feasible on the maximal system. We illustrate the framework using a task over an example environment, showing both sufficient and insufficient reduced scene graphs.
Read the full abstract
Robotics
DIDO: Distilling Interaction-Centric Dynamics into One-Step Denoising for World Action Models
World Action Models (WAMs) use video generation models to predict future visual dynamics for robotic manipulation, but iterative denoising introduces additional latency for closed-loop control. We empirically find that visual content converges at different rates during denoising. Static background structure forms early, whereas the gripper and manipulated object remain blurry after the first step, with their interaction dynamics emerging only through subsequent denoising. Consequently, naively truncating a multi-step video model to one step preserves scene structure but loses the interaction-centric dynamics most critical for manipulation. To address this issue, we propose DIDO, which distills the converged dynamics of a multi-step video model into a single denoising step. DIDO combines distribution matching distillation with interaction-centric representation guidance. Beyond compressing multi-step generation into one forward pass, DIDO explicitly models the gripper, manipulated object, and their interaction using supervised bounding-box visual reasoning tokens. Additionally, DIDO aligns the target object's representations across multiple model layers with features from a pretrained DINOv3 encoder. This interaction-centric guidance helps the distilled model preserve both the relevant entities and their future dynamics in a single step, while substantially reducing inference latency. DIDO achieves an average success rate of 99.0% on LIBERO, 76.6% on LIBERO-Plus, and 92.0% on RoboTwin, while also demonstrating effective transfer to long-horizon and generalization tasks in real-world robotic manipulation.
Read the full abstract
Robotics
StereoPatch: Patch-Aligned RGB-Depth Fusion for Spatial Perception in Robot Manipulation
Recent advances in robot imitation learning have produced visuomotor policies that predict actions directly from visual observations. Yet visually similar scenes can require different actions as target position, object height, or contact geometry changes. Pretrained RGB features may map these geometrically distinct states to similar policy inputs, while simply adding depth requires the policy to learn RGB-depth correspondence from the same limited demonstrations used to learn control. We introduce StereoPatch, a patch-aligned RGB-depth representation that binds registered metric geometry directly to the RGB patches used for action prediction. On a shared 2-D patch grid, asymmetric cross-attention incorporates depth information into the corresponding RGB features before action decoding. The resulting StereoPatch Tokens provide a geometry-aware visual representation that can condition general visuomotor policies without changing their underlying learning objectives. Across six real-robot tasks, StereoPatch achieves higher closed-loop success than appearance-only, geometry-only, raw RGB-D, and late-fusion baselines. Additional experiments across three simulation suites evaluate compatibility across visuomotor policy architectures, spatial generalization, and operating limits. Results suggest that resolving control-relevant geometric ambiguity benefits from aligning depth directly with the visual features used for action prediction, rather than supplying it as an independent modality. Project page: https://aus.bot/research/stereopatch/.
Read the full abstract
Robotics
P-POSEMEM: Projective Semantic Memory for Consistent Language Grounding under Pose-Graph Rewrites
A robot following language instructions needs its semantic memory to keep naming the same physical object while the SLAM pose graph underneath is optimized, loop-closed and compressed. Maps committing each detection to a world coordinate cannot: a closure moves the anchor it was measured from, or the solver marginalizes that anchor, and the query then selects a different object although both graphs represent the same posterior. P-POSEMEM stores each observation as an immutable event at its birth keyframe, retains the Bayes-tree elimination conditional of every marginalized keyframe, and integrates the semantic likelihood over the reconstructed joint posterior of poses, anchors and identities. Dproj, the total-variation defect between the language-goal distributions of inference-equivalent full and marginalized graphs, measures this directly. Over 40 HM3DSem scenes and 112,000 queries, P-POSEMEM reproduces the full-graph oracle (Dproj = 0) and reduces goal flips against every memory-reducing baseline. On an eight-run campaign whose 761 closures rewrote the map by up to 47 m, Dproj stays below 10^-13 with 0/288 goal flips when elimination follows the closures, where every ablation and a coordinate committed at insertion flip goals it does not; under a live bounded solver the same memory flips 23/288 against 53 for that frozen coordinate. A pre-registered negative control is detected by Dproj while leaving calibration error and navigation success unchanged, indicating that these measures capture distinct failure modes. Retrieval is held fixed by a shared frozen detector, isolating the gain to memory consistency. Code and data: https://anonymous.4open.science/r/posemem-2328/.
Read the full abstract
Robotics
InterSocialBench: Benchmarking Human and LLM Preferences for Companion-Robot Social Behavior
Companion robots face everyday situations in which several feasible behaviors may be appropriate, yet different people prefer different responses. We introduce InterSocialBench, a benchmark of 210 domestic scenarios and 18 high-level behaviors, pairing judgments from 100 human participants with 23,520 responses from seven large language models under 16 personality conditions. Each human annotation preserves a preferred action alongside explicitly appropriate and inappropriate candidates. A structured construction pipeline covers behavioral alternatives, competing situational cues, and relevant history and future tasks. Evaluation distinguishes preferred-choice agreement from explicit rejection, using scenario-grouped splits for trainable predictors. Simple frequency and persona-voting baselines illustrate these objectives. Across the tested prompts, model and human behavior distributions differ, and the diversity gap remains after matching response counts: humans exhibit 4.68 distinct choices per scenario, compared with 2.06–3.46 for the models. Human scenario-level plurality agreement is 51.5%, describing disagreement rather than a universal prediction ceiling. InterSocialBench supports evaluating social behavior selection without replacing individual judgments with a single consensus label.
Read the full abstract
Robotics
Learning to Exploit Passive Dynamics for Energy-Efficient Target Hopping of a Spring-Legged Quadcopter
Combining aerial thrust with spring-loaded hopping makes monopedal quadcopters promising for locomotion over complex terrain, but heuristic proportional-integral-derivative (PID) tuning limits coordination between active thrust and passive contact dynamics. We present a direct estimated-state-to-motor Proximal Policy Optimization (PPO) policy that commands four motors without an explicit hopping state machine or low-level attitude PID. Its reward combines Energy-Manifold Shaping for mass-normalized vertical-energy tracking and apex-state anchoring with Efficiency Shaping, which uses a history-aware power estimator to penalize general power use, impose an additional airborne-power cost, and penalize airborne near-stationarity. In representative hardware runs, the PPO-based control stack reduced cycle-averaged measured electrical power by 30.7% and mean total normalized thrust by 49.8% relative to the tuned PID-based control stack, while retaining repeatable commanded-height hopping and more concentrated landings. These observations are consistent with improved use of passive dynamics and reduced measured electrical demand.
Read the full abstract
Robotics
Dynamics-Informed Reinforcement Learning for Agile and Energy-Efficient Locomotion of a Monopedal Hopping Quadcopter
Although aerial-legged robots offer combined agility and efficiency, controlling high-speed hopping under complex hybrid dynamics is challenging. Reinforcement Learning (RL) is promising but prone to energy-inefficient "reward hacking". We propose a Dynamics-Informed RL framework for a monopedal hopping quadcopter. By embedding a target Specific Energy into the reward, we constrain the optimization to a physically viable energy manifold, ensuring stable hopping behaviour. By rewarding the phase-consistent behavior, it can encourage bio-inspired stance-phase impulse. Furthermore, penalizing the electro-mechanical power waste induces the motors generate an efficient impulse. This enables the policy to inject energy strictly during spring restitution without heuristic state machines. MuJoCo simulations validate robust height regulation and forward velocity tracking up to 2.0 m/s despite severe attitude-contact coupling. Ultimately, our approach yields a highly agile hopping gait, reducing energy consumption by 82% and 73% compared to hovering baselines and inefficiency baseline, respectively.
Read the full abstract
Robotics
From Prediction to Decision: World-Model-Guided Action Selection for Continuous Pile Excavation
Wheel-loader excavation is a sequential decision problem in which every scoop changes the terrain available to subsequent actions. A practical world model must predict action consequences accurately, rank candidates in real time, and operate inside the closed loop of a full-size machine. We present the World-Action Model (WAM), which proposes multiple scoops, rejects geometrically inadmissible candidates, jointly predicts signed terrain change and loaded volume, executes the candidate with the largest predicted load, and replans from the newly observed terrain. On 32 geometry-disjoint MinSlope test episodes, adding world-model ranking to matched diffusion proposals reduces the mean scoop count from 651.8 to 540.6 (17.1%), preserves 32/32 completion, and improves every paired episode. In a complete-system comparison, WAM completes 32/32 episodes versus 29/32 for an independently trained soft actor-critic policy. Comparisons of input representations, spatial support, and five architectures identify an accurate and efficient physics-structured predictor. We further evaluate the interface on event-disjoint full-size-loader data and deploy the complete perception-proposal-prediction-selection-execution loop for autonomous excavation. The ROS2/TensorRT implementation processes five candidates in 72.4 ms on a Jetson AGX Orin. The simulation results establish decision-level gains, while the physical experiments demonstrate real-world closed-loop feasibility.
Read the full abstract
Robotics
Understanding User Preferences of a Slope-Aware Variable-Admittance Filter for a Robot Guide Dog
This letter investigates how the parameters of a slope-aware variable-admittance filter influence user preferences in force-based interaction with a robotic guide dog for visually impaired individuals. The proposed system consists of a quadruped robot equipped with a sensor-free rigid handle for physical guidance. The framework combines path following, momentum-based interaction-wrench estimation, and a variable-admittance filter whose stiffness and damping are adapted online from slope information extracted by the robot's depth camera. The adaptation policies are evaluated through high-fidelity simulations and a human-subject study involving blindfolded sighted participants. Multiple strategies are compared using a Taguchi L9 design of experiments. Preliminary main-effect results suggest that increasing stiffness uphill and decreasing it downhill improves both objective and subjective metrics, whereas damping shows no significant main effect.
Read the full abstract
Robotics
Assistance Torque Estimation via Dynamics-Aware Optimization for Lower-Limb Exoskeleton in Complex Environments
Ground-truth human joint torque estimation relies on motion capture systems, which suffer from limited outdoor usability and significant deployment expenses. Furthermore, direct scaling of ground-truth joint torques to obtain motor torque commands is not necessarily the optimal strategy. To address the aforementioned limitations, inspired by the human motion generation process, this paper proposes a novel assistance torque estimation method based on the dynamic model. From an optimization perspective, the proposed method directly generates motor-assist torque and lowers the cost of data acquisition. Then, a data-driven assistance torque prediction network is trained to enable accurate real-time prediction under complex outdoor environments. Experimental results demonstrate that optimized (estimated) assistance torque exhibits better phase consistency with gait trajectories and better alignment with task characteristics. Relative to the Zero torque condition, the predicted torque can decrease metabolic rate by 11.8%-17.7%, heart rate by 8.9%-14.3%, and peak muscle activation levels by 28.2%-54.0%, respectively. This provides a new perspective for low-cost adaptive exoskeleton assistance.
Read the full abstract
Robotics
Planning in the Backbone: DiffAdapterVLA for Native Continuous Trajectory Generation with Driving VLMs
Pretrained driving vision-language models (VLMs) integrate visual, route, language, and driving context into rich driving priors, yet their representation objectives remain separated from continuous driving planning. Existing methods typically begin trajectory generation only after the VLM has formed a final condition, leaving depth-wise condition computation outside the stepwise formation of trajectory state. We introduce DiffAdapterVLA, which realizes Planning in the Backbone: it injects explicit trajectory tokens into selected VLM late layers, bringing trajectory state into backbone forward computation, where it co-evolves with driving conditions at different depths. Lightweight layer-wise DiffAdapters organize this computation into recursive trajectory refinement, while asymmetric joint attention preserves directed guidance from the condition stream to trajectory planning. By placing planning within existing backbone computation rather than relying on an independent trajectory planner, DiffAdapterVLA adapts only lightweight trajectory modules to turn existing driving priors into efficient continuous planning capability. NAVSIM results show that it achieves high-quality closed-loop planning with low end-to-end latency using few trainable parameters, and demonstrate that jointly evolving trajectory state and depth-wise driving conditions in VLM late-layer computation effectively realizes continuous trajectory planning.
Read the full abstract
Robotics
Low Clearance Hinge Joint Mechanism Based on 3D Printing on Sheet Fabrication Methodology
This paper presents a low-clearance hinge joint mechanism based on the 3D printing on sheet fabrication method. This approach simplifies the fabrication of hinge mechanisms and overcomes limitations of conventional origami manufacturing by eliminating the need for adhesives commonly used during assembly, making it suitable for robots at the tens-of-centimeters scale. The advantages and disadvantages of three types of hinge joint mechanisms are compared, and a hinge joint that can be designed with low clearance for various facet thicknesses is selected. Based on the selected hinge joint, the twisting angle and bending force are analyzed, leading to the implementation of a clearance of 0.1 mm. Torsional resistance is experimentally evaluated to measure the torque required for twisting caused by plastic deformation and clearance. The results show that the torque associated with plastic deformation is sufficient to constrain the undesired degrees of freedom of the hinge joint, while the torque required for twisting due to clearance is minimal. Based on the analyzed data, the proposed hinge joint mechanism is applied to a 3-degree-of-freedom delta robot manipulator, demonstrating precise motion with low clearance.
Read the full abstract
Robotics
Distributed Safe Cooperative Vector Field for Trajectory Curvature Constrained Multi-Robot Systems
Trajectory curvature constraints are inherent in practical multi-robot systems due to the limited turning capabilities of the robots. Without properly accounting for these constraints, robots may fail to accomplish assigned tasks, and their trajectories may diverge from the intended paths. This paper proposes a distributed safe cooperative vector field approach for multi-robot systems subject to trajectory curvature constraints. The proposed approach is composed of a cooperative vector field and a safety-oriented collision avoidance vector field, aiming to address the problems of cooperative motion and safe collision avoidance in multi-robot path-following tasks. A safety-oriented collision avoidance vector field with adaptively adjustable reactive boundary is developed to accommodate the kinematic curvature constraints of robots, thereby ensuring the physical feasibility of collision avoidance maneuvers. The proposed vector field requires only a single virtual variable from each neighboring robot to achieve cooperative motion and ensure both obstacle avoidance and inter-robot collision avoidance. The effectiveness of the proposed approach is validated through both simulations and real-world experiments on an actual multi-robot platform.
Read the full abstract
Robotics
A Vision Based Framework Integrating Attention and Action Cues for Interpretable Cognitive Workload Assessment in Human-Robot Collaborative Assembly
The introduction of human-robot collaboration (HRC) in industrial assembly operations is revolutionizing the manufacturing landscape. In this evolving environment, operators are required to seamlessly coordinate their manual tasks with real-time task information and robotic behaviors. These demands fluctuate during operation, yet conventional workload assessments depend on body-worn physiological sensors that complicate practical deployment. Here, we present a vision-based attention–action framework for continuous and interpretable workload-related assessment in HRC assembly. The framework combines RGB-D observations with robot states and calibrated task-related areas to construct a temporally confirmed representation of operator behavior. This representation identifies where task demand is concentrated and explains how it develops when attention and action diverge, the task context changes, or the operator hesitates. We evaluated the framework in a three-level collaborative gearbox assembly experiment with ten participants, using subjective ratings and synchronized physiological signals as independent references. Raw NASA-TLX ratings confirmed increasing perceived workload across conditions, with significant effects on overall workload and its mental and temporal dimensions. The vision-derived HRC-CWL output was significantly associated with ECG-derived features in seven of nine participants with complete correlation data. Synchronized interaction episodes further showed temporal correspondence between detected hesitation and physiological activity. Real-time deployment demonstrated that the framework can operate without requiring operators to wear additional sensors. These findings support HRC-CWL as an interpretable behavioral proxy for cognitive ergonomics analysis and adaptive robot assistance, rather than a direct psychophysiological measure of workload.
Read the full abstract
Robotics
X-WBC: A Cross-Embodiment Foundation Model for Humanoid Whole-Body Control
Scaling humanoid whole-body control toward general-purpose deployment requires large human motion corpora and training experience shared across robot bodies. Existing methods usually train one policy per robot, leaving motion experience isolated across embodiments. We introduce X-WBC, a cross-embodiment foundation framework that separates relatively shared human motion semantics from embodiment-specific physical execution. Human-centered command tokens align full human motion, robot reference motion, and sparse VR observations. A causal Transformer learns reusable temporal structure from mixed multi-robot rollouts, while lightweight robot-specific modules map the shared representation to each robot's proprioception and action space. Across nine simulated embodiments, external motions, and four real robots, experiments show that joint training improves tracking, the aligned representation supports consistent control across command sources, and the learned policy remains competitive beyond the training corpus. These results support heterogeneous humanoids as joint data sources and establish cross-embodiment joint training as a practical route toward whole-body control foundation models.
Read the full abstract
Robotics
PredTac: Learning Contact-Rich Manipulation with Predicted Touch
Contact-rich manipulation benefits from tactile feedback, yet physical tactile sensors introduce hardware, calibration, synchronization, and maintenance costs that complicate policy learning and deployment. We formulate predicted touch as an alternative to measured tactile input and present PredTac, a framework that learns to infer tactile states from causal visual observations and robot states and uses the predicted touch as an explicit interface for policy learning and execution. A tactile predictor is first trained with tactile supervision and then used to provide contact information without requiring measured tactile input during downstream policy training or execution. We evaluate PredTac across three contact-rich manipulation tasks in simulation and on a real robot, and further examine how policy performance depends on the predicted contact content. In simulation goal-offset evaluations, predicted-touch policies achieve 27.0%, 52.0%, and 44.7% success on USB, Barbed-spike, and Valve, respectively, improving over the visual baseline by 8.0-13.7 percentage points. On the real robot, predicted-touch ACT achieves 70.0%, 50.0%, and 90.0% success on USB insertion, Barbed extraction, and Valve rotation, respectively, with a three-task mean of 70.0%, approaching measured-touch ACT at 72.2% and substantially outperforming visual ACT at 21.1%. Fixed-policy interventions further show that performance is sensitive to the spatial structure of predicted contact, with spatial rearrangement at fixed value distributions reducing Valve success by 10.7 percentage points. These results demonstrate that predicted touch can provide useful contact information for contact-rich manipulation without requiring tactile sensing as a policy input.
Read the full abstract
Robotics
HarnessVLN: Unifying Training-Free Embodied Navigation through an Agent Harness
Embodied navigation requires agents to ground instructions or object goals in spatial observations and translate plans into successful execution. As multimodal large language models (MLLMs) become increasingly capable, they offer stronger support for navigation without task-specific training; however, improved semantic reasoning alone does not ensure that proposed actions remain consistent with spatial evidence, task progress, and execution outcomes. We introduce HarnessVLN, a zero-shot, training-free framework that unifies instruction-following and object-goal navigation through a shared Agent Harness. The Harness coordinates perception, memory, and execution tools through a unified interface, validating planner proposals for evidential support, geometric feasibility, and subgoal consistency before dispatch. It jointly manages hierarchical event memory and a persistent Spatiotemporal Graph to track task progress, preserve spatial evidence, and contextualize failures. Structured execution feedback updates this shared state, guiding subsequent planning, recovery, and termination. Across R2R, RxR, HM3D-v2, and HM3D-OVON, HarnessVLN achieves success rates of 59.6%, 51.4%, 76.0%, and 59.3%, respectively, outperforming prior training-free methods. Humanoid robot deployment further demonstrates its applicability to both navigation tasks in real-world environments. The project page is available at [https://agibot-harnessvln.netlify.app/].
Read the full abstract
Robotics · Cross-listed from cs.CV
GRAVA: Grounded Reasoning-to-Action Representation and Learning for Autonomous Driving
Driving vision-language-action (VLA) models increasingly reason before acting, but their intermediate reasoning is often weakly grounded in physical scene evidence and loosely connected to executable behavior. We present GRAVA, a framework built around Grounded Reasoning-to-Action (GRA), which unifies grounding, reasoning, and action generation in a single autoregressive stream. GRA links action-relevant language references to 2D visual regions and ego-centric physical states, organizes object interactions and decisions in a trajectory-anchored typed graph, and serializes this structure into grounded reasoning. A single VLM generates this reasoning followed by a compact Executable Planner action that is deterministically decoded into a continuous trajectory. We further introduce an agentic GRA data construction pipeline that combines forward scene grounding with backward trajectory anchoring, and use it to build GR-NavSim with 2.2M grounded question-answer pairs and 70K GRA reasoning traces. A progressive training strategy develops grounded cognition through pre-training, establishes the reasoning-to-action interface through imitation, and improves driving behavior through reinforcement learning and exploration. Using about 60% of the available human driving demonstrations for action supervision, GRAVA-8B achieves state-of-the-art performance among purely autoregressive driving models on the full NAVSIM benchmark. On an internal long-tail benchmark, full GRA improves key-object compliance and Closed-loop Driving Score by 19.3% and 20.5% over action-only prediction, respectively. These results show the benefit of preserving action-relevant physical evidence from grounded reasoning through executable action generation.
Read the full abstract
Robotics
LieSpline-DP: Lie-Group B-Spline Diffusion Policy for Smooth Robot Manipulation
Diffusion Policy (DP) is a powerful Learning from Demonstration (LfD) method for robotic manipulation, yet it suffers from discontinuous and non-smooth trajectories. Spline-based action representations promote smooth motion within individual action chunks, but existing spline-based methods neither guarantee cross-chunk $C^2$ continuity nor account for the group structure of $\mathrm{SE}(3)$. We therefore propose LieSpline-DP, a Lie-group B-spline diffusion policy that generates end-effector trajectories directly on $\mathrm{SE}(3)$ and couples consecutive plans by sharing their boundary control poses, ensuring $C^2$ continuity throughout the entire planned trajectory. Across three real-robot tasks, LieSpline-DP produces lower trajectory jerk and higher task success rates than the DP baseline. The gains are particularly pronounced in real-world tasks involving liquids and flexible objects: in our real-robot experiments, LieSpline-DP achieved a 100% success rate on both pouring and bucket hooking, whereas the DP baseline achieved only 10% and 30%, respectively.
Read the full abstract
Robotics
C$^2$Nav: Compare Before You Commit for Zero-Shot Vision-and-Language Navigation
Zero-shot vision-and-language navigation in continuous environments (VLN-CE) increasingly places foundation vision-language models (VLMs) inside the navigation loop. Existing systems commonly request cardinal outputs such as waypoints, pixels, headings, progress values, or absolute arrival decisions, coupling a generative response to geometric magnitude or an irreversible commitment. We study a complementary model-robot interface: the VLM compares controller-constructed alternatives, while geometry, thresholds, action magnitude, and execution remain on the physical side. We instantiate this idea in C2Nav, a training-free framework with three coordinated faculties. Seeing performs ordinal Gaze Election over physically vetted candidate views; Remembering maintains a compact route sketch and compares adjacent instruction-leg hypotheses; and Arriving combines a hesitation ladder, look-back comparison, and revocable walk-back for reliable stopping. On the public OpenNav R2R-CE 100 protocol, C2Nav with Qwen3-VL-8B-Instruct obtains 41.0% OSR, 31.0% SR, and 16.7% SPL, while the same interface with the standard GPT-5.5 model reaches 54.0% OSR, 44.0% SR, and 29.0% SPL. Whole-faculty ablations reduce SR to 14.0% without Seeing, 25.0% without Remembering, and 29.0% without Arriving. Matched role inversions that replace only the comparative answer form with cardinal/absolute questions reduce SR to 12.0%, 28.0%, and 21.0% in the spatial, transition, and terminal slots, respectively. The results indicate that a constrained decision interface and stronger VLM reasoning are complementary rather than interchangeable.
Read the full abstract
Robotics
Legislating World-Model-Based Planning with Legal Reasoning
As robotic systems grow more general, legal norms are needed to integrate them into society. This paper extends the isomorphism problem of aligning legal source texts with their encodings, and measures two key challenges to robot normative control: (1) the grounding isomorphism gap, where perception error grounds false atoms for legal reasoning, and (2) the ontological isomorphism gap, where one legal conclusion admits many faithful translations into planning constraints. The paper introduces a legal planning stack that employs Defeasible Deontic Logic (DDL) to constrain a motion planner. The stack leverages learned world models to plan and to provide legal context, enabling ex ante governance that intervenes before an illegal action is executed. It was deployed on a simulated robot arm pushing a cube across a 3x3 grid. The findings were (1) the legislated agent abided substantially more often than the non-legislated one, and modeling perception uncertainty lifted abidance even further, (2) the legal reasoning ran efficiently at runtime and its verdicts were auditable, and (3) the stack adapted to exogenous signals and endogenous rule changes. Both gaps were measured: (4) world model and probe error corrupted the factual input for the DDL reasoner, and (5) a single law admitted several faithful metric interpretations yielding drastically different abidance. Thus, ex ante legislation functions as intended, and closing these gaps with a standardized mapping from the law to runtime constraints and improved fact grounding from perception will yield robust laws that align robot behavior with society's norms. Project page: https://dylanwaldner-cail.github.io/Legislated-Planner/.
Read the full abstract
Robotics · Cross-listed from cs.CV
LG-VLN: A Zero-Shot Vision-and-Language Navigation Framework with LangGraph State Orchestration
Continuous-environment vision-and-language navigation (VLN-CE) requires interpreting natural-language instructions in unseen 3D environments and executing continuous low-level actions. Existing methods often depend on LiDAR, panoramic cameras, or extra sensors; separate geometric-mapping and semantic-navigation visual representations can cause long-trajectory spatial-semantic inconsistencies. We propose LG-VLN, a monocular zero-shot framework with shared visual features and LangGraph-based state orchestration. An online feed-forward 3D reconstruction network predicts depth, camera poses, and dense point clouds for agent-pose estimation and global map fusion. Geometry and navigation share dense CleanDIFT features: semantic consistency rejects incorrect inter-frame correspondences, while target-instance constraints define visual references whose similarity combines with local BLIP-2 image-text relevance to form a semantic value map. LangGraph represents instruction parsing, geometric perception, semantic value updates, path planning, action execution, and failure recovery as a directed state graph with conditional transitions, persistent state, and modular recovery mechanisms. On a fixed 550-episode subset of the R2R-CE val-unseen split, LG-VLN achieves 21.3% success and 12.1% success weighted by path length. Ablations show shared semantic features improve navigation, further boosted by combining visual similarity and image-text relevance. Results establish shared visual representations and explicit state orchestration as effective for zero-shot VLN-CE using monocular RGB alone. Code will be publicly released for reproducibility.
Read the full abstract
Robotics
Task-Distribution-Aware Counterweight Synthesis and Constrained Co-Design for Serial Manipulators
Passive counterweights are simple gravity compensators, but a counterweight selected from a single pose is not generally optimal for the configurations and tasks a manipulator actually executes. This paper develops a task-distribution-aware synthesis framework in which the operating distribution $\rho(q)$ enters the design explicitly. For a counterweight moment $p=m_c r_c$ with gravity torque $-gp\phi(q)$, the weighted mean-square residual gravity torque has the closed-form minimizer $p^*=E_\rho[\tau_g\phi]/(gE_\rho[\phi^2])$. If payload gravity torque is affine in payload mass, the optimum is also affine: $p^*(m_p,\rho)=p_0^*(\rho)+m_pK_p(\rho)$. For fixed static moment, added counterweight inertia is $I_c=pr_c$ while mass is $m_c=p/r_c$, so mass-radius selection is underdetermined unless physical constraints are specified. A recovered three-link manipulator is used as a case study. At $r_c=0.20$ m, zero-payload equivalent optima are 0.672 kg for uniform joint-space operation, 0.683 kg for approximately uniform task-space operation, 0.713 kg for a representative pick-and-place family, and 0.952 kg for a high-gravity-biased distribution, a change of more than 40% caused solely by the operating distribution. Nondominated fronts show that preferred mass-radius pairs depend on declared engineering bounds. A rated-torque-referenced all-joint screen increases zero-payload feasible task-space coverage from 78.1% without compensation to 93.7% for the uniform-distribution design. A lumped point-mass trajectory study gives a provisional crossover from no counterweight at very aggressive motion to stronger compensation as motion slows. These actuator and dynamic results are engineering consequence studies rather than physical validation.
Read the full abstract
Robotics
Steering Generative Robot Policies with Lexicographic Preferences
Pretrained generative robot policies can produce effective behaviors across diverse environments, but deployment can lead to requirements and preferences that may not have been represented during training. Furthermore, at deployment, an operator, user, or application may assign these requirements and preferences a priority order that can vary across deployments. For example, embodiment-specific feasibility constraints may need to be satisfied first, while user-specific preferences guide behavior among the feasible options. We show that a frozen generative robot policy—based on either diffusion or flow matching—can be steered at inference time to respect such lexicographically ordered deployment objectives. To achieve this, we introduce two modifications to the sampler. First, we apply dynamic-barrier guidance to sampled trajectories, constraining lower-priority updates so that higher-priority costs do not increase (up to first order). Second, we select the executed sample using a cascade that successively filters candidate samples according to each priority level. The policy weights remain unchanged. On a navigation benchmark, we demonstrate that our method improves success, traversability, and preference compliance over the frozen policy, and achieves substantially better compliance than tuned weighted-sum baselines. The same method transfers to a flow-matching manipulation policy on LIBERO, where it improves compliance without reducing task success. A controlled manipulation study further shows that, in settings where a fixed weight can match the desired ordering, the dynamic barrier reaches comparable best performance over a substantially wider range of parameter settings.
Read the full abstract
Robotics
Atomic Motion Coordinate for Language-Steerable and Force-Responsive Manipulation
Can changing only the language instruction redirect a VLA policy's end effector, or does the visually driven motion prior dominate? We present Atomic Motion Coordinate, a geometry-grounded coordinate for steerable and force-responsive manipulation. Each arm owns thirteen signed translation, rotation, and hold atoms grounded from text and forward kinematics with vision withheld, and the coordinate is injected into every action-expert block via weighted codebook alignment. Contact history modulates the same coordinate through a bounded spherical residual that is recomputed from a fixed nominal latent to regenerate only the unexecuted horizon suffix. Across 7,520 offline horizon interventions, opposite-atom separation reaches 92.5/83.1% (single/dual) versus 39.1/24.0% for LA4VLA-style. Across 50 real-robot trials per task, AMC raises OOD fruit progress from 60.5% to 87.8%; force adaptation raises Plug/Vase from 59.0/71.5% to 78.5/75.2%.
Read the full abstract
Robotics
IMPACT-VLA: Interaction-aware Multimodal Propagation Attribution via Counterfactual Trajectories for Vision-Language-Action Policies
Vision-Language-Action (VLA) policies perform robot manipulation tasks using multimodal inputs such as visual observations, proprioceptive states, and language instructions. However, it remains unclear at which execution stages each modality contributes to final task success and how input interventions propagate through subsequent states, observations, and actions. Existing attribution approaches primarily measure local sensitivity or temporally aggregated importance, limiting their ability to capture phase-dependent contributions and cross-phase dependencies. We propose Interaction-aware Multimodal Propagation Attribution via Counterfactual Trajectories for Vision-Language-Action Policies (IMPACT-VLA). IMPACT-VLA constructs behavioral phases from action transitions in a successful reference rollout, aligns them with policy query boundaries, and defines phase-modality blocks as attribution units. It then performs closed-loop counterfactual re-execution to quantify each block's contribution to final task success. We further analyze cross-phase non-additive interactions and trajectory propagation while distinguishing behavioral from functional recovery. Across 30 LIBERO robot manipulation tasks using OpenVLA-OFT, dominant-modality transitions occurred in 25 tasks (83.3%), and closed-loop attribution identified task-critical information more faithfully than Static Action Perturbation. Later-block marginal gains for negatively interacting pairs increased by approximately 3.3x under early-phase input replacement, while functional recovery could occur without behavioral recovery. These results reveal when multimodal inputs support task success and how their contributions become conditionally coupled during closed-loop execution.
Read the full abstract
Robotics
From Learned-Mode AV-Traffic Pairing to Planner Decisions: A Marginal-Preserving Study on Argoverse 2
Joint motion forecasts pair each autonomous-vehicle (AV) future with surrounding traffic, but actor-level metrics do not show whether that structure matters to a planner. We study this question with a marginal-preserving product control that removes AV-traffic pairing among the learned modes while retaining the fixed constant-velocity pair and holding trajectories, actor-level marginals before planner conditioning, candidates, the cost terms and weights, and fallback fixed. The intervention also changes candidate-conditioned concentration. Across twelve runs on 1,400 held-out Argoverse 2 scenarios, the intervention changes 3.0% of route-level offline selections at $\tau=4$ m. Control-minus-joint recorded-trajectory regret is $-0.026$ and $-0.118$ at the two training sizes; crossed and seed-$t$ intervals span zero. At $\tau=1$ m, relative costs change in 87.9% of route evaluations and route-level offline selections in 8.1%. Before concentration matching, descriptive outcome estimates favor the control. Most of this gap disappears along an approximate concentration-matching path; the remaining contrasts are $+0.112$ and $-0.047$, and both crossed intervals span zero. Actor-level forecast metrics remain identical. Pairing-strength and temperature sweeps show that the decision contrast grows with pairing removal and sharper conditioning. The intervention changes planner decisions even though actor-level metrics remain unchanged. The matching analysis, however, cannot separate any recorded-outcome effect of learned-mode AV-traffic pairing from the accompanying change in conditioned concentration.