Papers

Touch is fundamental to dexterous manipulation, yet most egocentric human data increasingly used for robot learning lacks tactile information. Directly collecting large-scale tactile data is challenging due to sensor limitations, while human video data is abundant, contact-rich, and easily scalable. This motivates a natural question: can tactile signals be inferred purely from vision? To address this, we introduce EgoTac, a generalizable model that predicts rich tactile information directly from egocentric human videos. EgoTac is trained on a unified corpus of over 5.7M image-tactile pairs, covering both continuous force measurements and binary contacts. By learning from this diverse dataset, EgoTac captures nuanced touch dynamics across varied interactions. Experiments demonstrate strong performance: in-domain prediction achieves an average force error below 0.06N. On out-of-domain contact prediction benchmarks, EgoTac consistently outperforms the state-of-the-art contact estimator. It also captures the rise and fall patterns of real tactile data and enables zero-shot predictions on unconstrained real-world videos. Scaling analyses further reveal that both data diversity and volume improve performance steadily. Overall, EgoTac provides a scalable pathway to extract tactile priors from egocentric human videos, enabling broadly applicable tactile-aware robot learning. Related resources can be found at https://egotac.github.io/ .

Post-training of vision-language-action (VLA) models typically relies on expert demonstrations and policy interaction trajectories. However, in long-horizon manipulation, a single episode often spans hundreds of control steps and multiple phases, while success or failure is only revealed at episode termination. Policy improvement therefore requires step-level credit signals to distinguish behaviors that advance the task from those that stall or regress. We present PACE, a credit-assignment framework for post-training on long-horizon manipulation, centered on a phase-progress-aware critic. PACE consists of two key modules: (1) the Global-Local Cooperative Value-Correction Critic (GLC-Critic) aggregates visual and motion-difference features within local temporal windows to infer the phase and intra-phase progress of each step, and applies residual correction to a discretized remaining-cost distribution accordingly, enabling step-level credit assignment; (2) Progressive Policy Distillation (PPD) converts credit into positive and negative conditions via task-wise thresholds and trains a credit-conditioned action generation policy: it first protects the pretrained policy with high-credit positive samples, then incorporates all positive and negative credits to learn the quality boundary, and at inference amplifies high-credit behaviors through the difference between conditional outputs. Extensive simulation experiments and diverse real-world robotic-arm experiments demonstrate that PACE consistently achieves significant improvements over the strongest baseline.

Current Vision-based SLAM systems fail catastrophically when motion blur corrupts the visual input, as they attempt the ill-posed inverse problem of recovering sharp content from degraded observations. We present MotionGS-SLAM, which fundamentally reimagines motion blur handling through a paradigm shift: rather than removing blur artifacts, we reformulate the challenge as a well-constrained forward problem that generatively models blur formation within the rendering pipeline. By leveraging event cameras' microsecond temporal resolution and immunity to motion blur, we introduce a novel event-modulated Gaussian kernel that dynamically adapts each Gaussian's rasterization based on precise motion cues. Our dual-modulation mechanism transforms 2D Gaussian projections from isotropic dots into anisotropic, motion-aligned elliptical brush strokes (spatial modulation) while adaptively varying exposure integral sampling density based on local velocity (temporal modulation). This physics-based approach enables joint optimization of intra-exposure camera trajectories and 3D scene geometry through blur-aware photometric and event-based constraints. Extensive experiments demonstrate significant improvements over state-of-the-art methods in trajectory accuracy and map quality under severe high-motion conditions.

Embodied intelligent ultrasound scanning enables the automation and standardization of the ultrasound examination process by integrating perception, decision-making, and execution capabilities. However, existing methods suffer from loosely coupled modeling between force and ultrasound modalities and lack awareness of scanning stages, which limits their ability to capture dynamic probe-tissue interactions. To address these issues, we propose ForceU-VLA, a force-aware Vision-Language-Action model for autonomous embodied ultrasound scanning, which leverages force signals and ultrasound image feedback throughout the scanning process to enable accurate and high-quality ultrasound acquisition. Firstly, we propose a Force-Ultrasound Synergistic Fusion Module (FUSFM) that synergistically fuses ultrasound visual and force-feedback information to provide stable, reliable guidance for probe motion. Secondly, a Stage-Adaptive Modulation Mechanism (SAMM) is proposed to accommodate the task requirements across different scanning stages by adaptively modulating multimodal features to enhance their representation quality. Additionally, we introduce ForceU-VLA-Data, a real-world, force-aware embodied ultrasound dataset that integrates visual, force, and action signals, including data from two organs across five representative clinical scanning views, and comprising 450 expert-collected trajectories with approximately 100,000 synchronized multimodal frames. Extensive experimental results demonstrate that ForceU-VLA significantly improves contact stability and probe pressure regulation in embodied ultrasound scanning, thereby effectively enhancing task execution quality and overall system reliability. The source code is available at https://github.com/VMVLab/ForceU-VLA.

When a robot policy is trained for a new task or dataset, its visual encoder can be frozen and only its action generation module trained, reducing training cost. Freezing removes the encoder's backward pass, but its forward pass must still run at every training step because the input images change, so it keeps consuming GPU compute. We therefore ask whether moving this computation to a low power AI accelerator such as an NPU can reduce total energy despite the added data transfer and longer training time, and how it affects policy performance. We built an asynchronous training pipeline that uses both a GPU and an NPU for the AR-Actor specialist. The frozen visual encoder runs in A8W8 INT8 on a Mobilint Aries2 NPU, while the FP32 action expert is trained on an NVIDIA GeForce RTX 5060 Ti GPU. We compared a GPU-only baseline with four conditions, L1 to L4, which gradually extend NPU offloading from one to four Transformer encoder layers. Each condition was trained for 30,000 steps with three random seeds. We measured GPU board power for the GPU-only condition and combined GPU and NPU board power for the NPU conditions. Energy per sample decreased by 17.1% in L1, which offloaded ResNet18 and the first encoder layer, and by 27.9% in L4, which offloaded ResNet18 and all four encoder layers. In contrast, training time per sample increased by 15.2% in L1 and 37.7% in L4, and peak allocated GPU memory decreased by 19.8 to 20.7%. The 15 resulting policies were each evaluated with the same 300 environment seeds, for a total of 4,500 simulator rollouts. The combined success rate was 93.33% for GPU-only and 91.44 to 92.89% for the NPU conditions. These results show that NPU offloading of a frozen visual encoder can reduce training energy, but it increases training time and lowers policy success rate by 0.44 to 1.89 percentage points compared with GPU-only training.

Achieving robustness, accuracy, and efficiency simultaneously remains a central challenge in light detection and ranging (LiDAR) simultaneous localization and mapping (SLAM). While learning-based approaches deliver strong benchmark performance, they often require extensive training, substantial computational resources, and struggle to generalize to unseen or degenerate environments. Geometry-based methods are efficient and interpretable, yet their performance degrades in planar or repetitive scenes due to limitations of standard iterative closest point (ICP) formulations. We present HP2-SLAM, a minimalist yet robust LiDAR SLAM framework built around a neighborhood-size adaptive hybrid ICP. Our key insight is a planarity-aware adaptive threshold that dynamically classifies correspondences based on local geometric structure and density, thereby enabling a principled balance between point-to-plane and point-to-point residuals. This formulation stabilizes alignment in both structured and degenerate environments without feature engineering, learning modules, or dataset-specific tuning. Integrated into a complete SLAM pipeline with submap management, loop closure detection, and pose graph optimization, HP2-SLAM consistently outperforms strong geometry-based baselines across publicly available datasets while maintaining real-time performance on commodity hardware. Our results demonstrate that carefully designed geometric adaptation can achieve strong generalization and robustness without sacrificing simplicity or efficiency.

Long-horizon robotic manipulation fundamentally relies on persistent spatial memory. However, existing 3D memory systems function merely as passive recorders: they store observations using fixed, hand-crafted rules, treating every scene element–whether a critical grasp target or an irrelevant background wall–with equal importance. In this paper, we propose a paradigm shift from passive storage to active, task-driven spatial memory. We argue that a robot's memory should not simply record what it sees, but actively learn how to remember–discovering which objects to track precisely, how aggressively to update them, and what to discard, all learned end-to-end without hand-designed rules. Crucially, this active paradigm is realized by unifying memory update and readout as two sides of the same cognitive process, enabling bidirectional flow where task needs shape update strategies and vice versa. To instantiate this vision, we introduce GaussMemory, which leverages 3D Gaussian Splatting as a persistent geometric substrate. On LIBERO, GaussMemory outperforms MemoryVLA on Goal and Long-10; on VLABench, it surpasses $\pi_0$-FAST by +5.2% (Track 1) and +6.0% (Track 6).

A structured world-state (entities, relations, context, and predictive cues) is designed to preserve prediction-critical content when perception degrades, but it presumes observations to populate it; when the primary visual modality is occluded or degraded, those observations may be missing. We address how to sustain the world model from a complementary modality by treating the absence of expected co-evidence as evidence of a hidden cause. The abductive framework is modality-agnostic; this article instantiates it acoustically. A microphone-array front-end estimates the bearing of engine and tire sources and extracts approach-rate evidence (Doppler when a stable tone exists, a broadband looming readout otherwise); the event "signature present, visual co-evidence absent" then triggers abductive inference of a hidden road user, emitting a calibrated risk advisory rather than a control command. Recoverability of the hidden state is analyzed as an identifiability question separating shared from modality-unique information, and cueing is cast as Neyman-Pearson detection under an explicit false-alarm budget. On real occluded-approach recordings at blind junctions, the method warns a mean 1.7 seconds before line-of-sight entry, matches the sustained-window variant of the published acoustic baseline's detection rate with 42% fewer false alarms, localizes to 3.4 degrees median once in view, is well calibrated (expected calibration error 0.034), and keeps hazard awareness above 0.87 under staged vision degradation that collapses a vision-only channel to 0.03. We also measure the method's limits: calibration transfers to an unseen junction almost losslessly, the signature classifier does not, and moving-ego noise is the binding deployment constraint.

Free-floating space manipulator systems face operational challenges due to dynamic coupling. While traditional reactionless manipulation eliminates base disturbances, enforcing the null-space projections across all rotational axes imposes excessive constraints on the system and drastically reduces the available workspace. To address this limitation, this work proposes a multi-axis selective decoupling framework that nullifies momentum transfer exclusively along mission-critical directions. By leveraging a directionally constrained sub-coupling matrix, the framework relaxes the null-space constraints. Numerical simulations confirm that this approach mathematically eliminates constrained directional disturbances along the targeted axes while preserving the remaining degrees of freedom, enabling the manipulator to execute task-space operations successfully.

Thematic analysis (TA) has long been regarded as an inherently human, reflexive, and interpretive process. However, the extent to which LLM-generated TA is appropriate for Human-Robot Interaction (HRI) research involving vulnerable populations remains largely unexamined and raises critical questions about validity and ethics, particularly in sensitive research contexts. This paper presents a comparative study of human- and LLM-generated TA in an HRI context with a focus on vulnerable populations. We evaluate both objective and semantic agreement between human- and LLMgenerated themes, and examine whether observed divergences reflect systematic interpretive patterns with ethical significance. Our analysis investigates whether LLM-generated TA risks marginalising or misrepresenting the experiences of vulnerable participants, with implications for researchers employing LLM-assisted TA in HRI.

Natural-language interfaces can lower the barrier to programming robots, but existing systems struggle when users request complex tasks. While large language models (LLMs) perform well with simple commands, they often struggle to generate code for multi-step tasks, decompose high-level instructions, or reuse prior solutions. We present SkillComposer, an interactive natural-language robot programming system for simulation environments that continually learns reusable program abstractions. SkillComposer uses a generate-test architecture in which an LLM iteratively generates and revises robot programs before execution. Successful programs are stored and processed by an online library-learning algorithm that compresses recurring function sequences into reusable macro skills for future tasks. We evaluate SkillComposer through ablation experiments and a user study with 12 participants to determine its effectiveness on manipulation and robot caregiving tasks. The results show that evaluator-guided generation and learned abstractions improve success rates and usability while reducing user effort in natural-language robot programming.

The increasing dynamic demands of modern robotic joints require current controllers to achieve high bandwidth over wide operating ranges of speed, acceleration, and torque, where communication, computation, and discrete-time effects can no longer be neglected. Conventional PMSM current controllers are typically designed in continuous time and subsequently discretized, leaving the sampling frequency and the impact of implementation delays largely to heuristic selection and iterative validation. This paper introduces a task-aware, delay-extended discrete-time joint model that explicitly accounts for physical communication and computation delays and enables direct synthesis of a discrete PI current controller with prescribed bandwidth and delay guarantees throughout the operating envelope. The framework analytically determines the minimum required sampling frequency, controller gains, and DC-link voltage needed to satisfy the specified motor and joint performance. Simulations across a range of dynamic requirements validate the methodology and demonstrate substantially reduced sampling-frequency and DC-link-voltage requirements compared with conventional continuous-time-based design. Experiments on a newly developed custom robotic joint further validate the proposed framework under real embedded implementation conditions.

Recent 3D Gaussian Splatting (3DGS) has enabled efficient photorealistic view synthesis and is rapidly being adopted in simultaneous localization and mapping (SLAM) systems for online mapping. In these systems, a Gaussian map must be expanded and refined incrementally while tracking runs in real time, so initialization and density control directly determine where limited computation and iterations are spent. This contrasts with offline 3DGS reconstruction, where such heuristics can be amortized over long optimization schedules. However, most 3DGS-SLAM pipelines inherit initialization and density-control heuristics from offline reconstruction, which can become brittle under the strict per-keyframe optimization budgets and incremental map growth of online SLAM. In this work, we revisit these heuristics in a decoupled 3DGS-SLAM setting and propose three geometry-aware methods that operate in the mapping thread: transmittance-preserving densification, camera-aware scale initialization from depth and intrinsics, and error-guided densification that focuses new primitives on high-residual regions. Our results show consistent improvements in rendering quality with negligible overhead, highlighting the coupling between photometric residuals and pose uncertainty in online SLAM. We will open-source our code to the community to foster growth and validate reproducibility.

Background subtraction is a key preprocessing step for infrastructure-based LiDAR perception, enabling efficient isolation of dynamic traffic participants without semantic annotations. However, systematic cross-sensor evaluations and reproducible studies for static roadside LiDAR are missing. This paper presents a comparative benchmark of beam-wise statistical background subtraction for statically mounted LiDAR sensors. We formulate background estimation as a per-beam temporal modeling problem and investigate complementary statistical strategies that capture dominant as well as multi-modal background structures, combined with spatial filtering in the angular and 3D domain. To enable reproducible evaluation, we introduce HighwayScene, a new multi-LiDAR dataset recorded in a static roadside setup, and extend the public CoopScenes dataset with static/dynamic point-wise annotations. Across multiple scenes and heterogeneous sensing technologies, we demonstrate that beam-wise statistical modeling provides a robust and transferable solution. Combining lightweight per-beam models with spatial consistency filtering substantially improves precision while maintaining high recall and real-time capability. All datasets, annotations, and implementations are publicly released.

An actuator health estimation algorithm for a soft swimming robot that can perform anguilliform swimming is developed. Due to harsh operational environments of underwater robots, and the common degradation of soft robot materials and actuators, accurate estimation of actuator functionality is necessary for robots to perform their missions as well as return to base in the event of actuator degradation and failure. Termed REACH (Real-time Estimator of Actuator Control and Health), the architecture employs a soft robot model, sigma point filter, and a formal statistical hypothesis test to adequately capture the nonlinearities and changes over time. The performance of REACH using three sensor types (GPS, IMU, and Bend Sensor) with one sensor on each actuator is compared, demonstrating that both bend sensor and IMU are adequate choices. Sensor quantity and placement are evaluated for IMU and bend sensor, showing two sensors are sufficient for IMU, whereas three sensors are needed for bend sensor. Three swimming gaits (linear swimming, wide turning, tight turning) are compared, demonstrating that REACH can successfully predict actuator health for all three gaits, with minimal differences in performance. A filter validation method shows the fault estimation algorithm is statistically consistent in finding the correct degradation. The approach is experimentally evaluated using bend sensor data collected from a fish robot, demonstrating that REACH can successfully estimate actuator health with noisy data and variations in manufacturing.

Anguilliform locomotion is a highly efficient swimming mode; the advent of new materials for soft robots enables the development of an eel-inspired soft robot. This paper presents a simulation model of an eel-inspired soft robot designed for anguilliform swimming. This model can aid in design optimization and the development of model-based estimation, reasoning, and control systems. A Finite Element Method (FEM) model of an elastic rod is used to capture the soft materials of the robotic fish, which makes it particularly amenable to variation over time as the material properties change. The material model is coupled with a hydrodynamic force model to simulate the behavior of a soft, elongated robot in water. The model is used to demonstrate the effectiveness of the proposed control approaches in achieving desired swimming behaviors. It also provides insights into design decisions, including the robustness of different system configurations and the impact of material degradation and failure. The results show that slightly asymmetric designs are advantageous, offering comparable swimming velocities but greater maneuverability. This model can be used to guide future robotic design decisions aimed at optimizing performance for specific tasks.

Vision-language-action (VLA) models have improved the flexibility and generality of robotic manipulation, yet they remain fragile to online disruptions, such as changes in task goal, scene configuration, or robot state. Existing recovery methods often require failure data, policy retraining, or external corrective agents, introducing additional data requirements and execution risks. We propose Counterfactual Realignment (CoRe), a training-free framework that recovers a frozen VLA at inference time without failure data. Upon detecting a deviation, CoRe imagines how the policy would continue toward the current goal from a recent viable state, using synthesized observations in place of physical execution, and then minimally realigns the robot and scene to rejoin this imagined continuation before returning control to the policy. Recovery is therefore planned without physical trial-and-error, preserves completed task progress, and handles both mid-episode instruction changes and physical perturbations in a unified manner. Extensive experiments across multiple simulators, VLA backbones, and real-world settings show that CoRe improves success rates by up to 85.0 percentage points to near-nominal levels while reducing physical restorations by 42.2%, without policy fine-tuning or failure-specific recovery training.

Minimally invasive and robot-assisted surgery offer many advantages over traditional open surgery, but deprive surgeons of tactile feedback and the ability to palpate tissue with their fingers. To address this lack of tactile feedback, we introduce the MISTac, a high resolution vision-based tactile sensor specifically designed for palpation in MIS. The sensor has a replaceable sensor tip with a diameter of 8 mm which allows it to fit through the trocars used in minimally invasive surgery. Its modular 3D-printed case design allows the use of bulky off-the-shelf illumination and imaging hardware that can easily be exchanged and upgraded. The sensor has an optical resolution of 176.68 $\mu m$, a tactile resolution of 250 $\mu m$, and can resolve forces as little as 24.3 mN. An in vivo study with the sensor shows its usability in minimally invasive surgery. We trained a machine learning model with the tactile data collected in the trial on a tissue classification task achieving an aggregate accuracy of ~84% in a leave-one-out cross validation. Tactile sensors have the potential to one day aid surgeons during minimally invasive surgery with tasks such as tissue classification or intra-operative tumor localization; MISTac is a small step towards this vision. We open-source MISTac at https://github.com/lasr-lab/mistac

Automated vehicles must explain their decisions in ways that passengers can understand, monitor, and trust. Existing language-annotated driving datasets are mostly observer-written, post-hoc, simulation-based, or generated from sensor inputs, rather than elicited from the driver performing the action. We introduce NARRATE, a multimodal real-world Australian driving dataset comprising 2,050 annotated events from 35 experienced drivers and driving instructors on public roads. Each event is grounded in synchronised visual, localisation, motion, and LiDAR streams and paired with in-vehicle and/or post-drive free-text explanations. NARRATE provides action labels, scenario-context labels spanning six high-level and 32 fine-grained categories, and span-level Situational Awareness (SA) annotations over driver explanations for Perception, Comprehension and Projection. Four benchmark tasks (SA, scenario-context, driver-action classification, and explanation generation) show that this structure is learnable from driver language, while fine-grained context recognition and explanation generation remain challenging. NARRATE paves a path towards more human-centred and domain-aware explanation models for automated driving.

Articulated vehicles are the workhorses of freight transportation, and their autonomous navigation is challenging. Their physical characteristics and motion constraints pose significant challenges in manoeuvring these vehicles on narrow routes. This paper presents a spatiotemporal tube-based approach to plan autonomous navigation of vehicles like tractor semi-trailers, truck/ tractor trailers, towing Automated Guided Vehicles (AGVs), and road trains. This planning approach provides a certified path plan for the truck or tractor, ensuring that the towed series of trailers always remains within the road corridor, limited by permissible corrections. The planning leverages the kinematics of the linked elements along with sway constraints to arrive at a safe tube for the actuated prime mover. We modify the spatiotemporal tube using permissible corrections to provide a route safety certificate to the vehicle for the given route. The proposed planning method is verified on a truck-trailer navigation simulation for a complex route.

As heterogeneous robotic systems deploy across diverse urban zones, maintaining safety amid complex human-robot interactions remains a critical challenge. We present a unified framework that bridges systematic hazard analysis and runtime enforcement using hazard-informed safety envelopes. Rather than treating safety as a static constraint isolated within individual software modules, we introduce a cross-layer safety transformation process spanning symbolic, spatial, and dynamic world models. We show how this representation naturally interfaces with physical AI runtime harnesses to guarantee safe urban mobility.

An autonomous robot efficiently exploring an unknown environment, such as looking for water sources on Mars, faces two simultaneous demands: building an accurate information map while quickly finding the regions of greatest value, and paying for every meter of travel and the cost of every measurement it takes. Classical information-seeking and reward-seeking criteria address only one of these objectives at a time. Here, we propose Expected Free Energy (EFE), the principled action-selection objective from active inference, as a unifying criterion for budgeted robotic informative path planning. Maintaining a Gaussian-process belief over the information field, our agent plans continuous trajectories that minimize expected free energy under hard path-length constraints. The results from multiple realizations show that EFE-based planning yields accurate posterior maps and locates the highest-value regions simultaneously, outperforming information-theoretic baselines under the same settings. In robotic exploration, these unified, easy-to-tune principled information-gathering strategies facilitate autonomous deployment while enforcing efficiency and resource constraints.

This paper presents THRIVE (Therapeutic Humanoid Robot In Virtual Environment), an at-home rehabilitation platform that integrates a suite of virtual-reality upper-body rehabilitation games, a real-time camera-based motion-tracking system, and a socially interactive robot therapist. The system is designed for therapy and intervention in children with upper-limb motor impairments, which can be improved through consistent, task-specific practice. THRIVE features a set of newly designed, engaging games that target functional reaching, grasping, and object-manipulation movements through customizable popping, hitting, catching, and grabbing tasks, while the camera-based tracking system captures the child's kinematic performance during play. A robot therapist - deployable either as a physical robotic coach or as a remote-presence virtual agent - delivers adaptive, dynamic feedback to motivate the child and guide their movements toward therapeutic goals. THRIVE decouples the therapeutic games from the robot embodiment, extending the platform to support various embodiments and different robots within one modular system. This robot-agnostic design makes THRIVE affordable, scalable, and readily adaptable for sustained use in the home, offering a practical pathway to more consistent and engaging upper-limb therapy for children with motor function impairments.

Autonomous racecars operate at the limits of vehicle dynamics, where small control errors translate into safety-critical behavior and lost performance. Trajectory planners assume perfect tracking and remain blind to execution errors. To guarantee safety, trajectory planners therefore restrict themselves to conservative spatial margins, leaving usable track space untapped. To overcome these issues, we introduce a control-informed online trajectory planning framework that learns from its own execution errors. By measuring systematic tracking deviations during runtime, we dynamically adapt spatial track constraints and iteratively expand the free-space planning area. The planner remains time-optimal while compensating for accumulated execution errors. This method was analyzed in a high-fidelity closed-loop simulation environment with autonomous racecars. The results demonstrate that our approach reduces lap time by 1.8\,s without increasing computational burden, maintaining a median runtime of 25 ms. Our finding indicates that feeding control-induced deviations back into the planning layer unlocks performance previously inaccessible to modular architectures and enables autonomous vehicles to exploit track limits systematically.

Textile-integrated capacitive sensors offer flexible and conformable tactile sensing for wearable electronics and human-robot interaction; however, the influence of yarn-level architecture on capacitive transduction characteristics remains insufficiently quantified. This work presents a textile capacitive sensing platform based on silver-coated yarns coated with polydimethylsiloxane and assembled into one-, two-, and four-layer twisted configurations. The influence of effective electrode overlap area and inter-fiber separation on the capacitive response is systematically investigated, enabling architecture-dependent tuning of pressure and proximity sensing characteristics. Pressure was calculated using the localized single-fiber contact area, corresponding to stresses of 0.4-3.9 MPa. Increasing the layer number improved mechanical strength and sensing performance: elongation at break increased from 37.5% to 62.5% and 85.0%, while the maximum load increased from 23.3 to 42.7 and 89.7 N. Sensitivity increased with layer number and frequency, reaching 0.1331 MPa$^{-1}$ for the four-layer sensor at 100 kHz. The four-layer configuration also exhibited low hysteresis, minimal thermal drift from 25 to 90 $^\circ$C, and stable operation over 15,000 cycles. Proximity detection ranges of 60, 50, and 40 mm were obtained for the one-, two-, and four-layer sensors, respectively, revealing an architecture-dependent sensitivity-range trade-off. A 4$\times$4 textile sensing array enabled spatial contact mapping, while robotic-arm integration demonstrated real-time touch and proximity detection with an end-to-end robotic system latency (from detection to robot reaction) of 403 ms. The results establish yarn architecture as a tunable design parameter governing the measurement characteristics of textile-integrated capacitive sensing systems.

Vision-Language-Action (VLA) models have recently achieved promising performance in robotic manipulation. However, existing benchmarks mainly evaluate generalization on static manipulation tasks and largely overlook dynamic interaction scenarios. To address this gap, we present ReflexBench, a benchmark for reaction-critical manipulation. ReflexBench contains six dynamic tasks and introduces an evaluation framework that decouples simulator stepping from robot control while supporting configurable latency under synchronous and asynchronous inference. Building upon ReflexBench, we propose ReflexVLA, an efficient VLA model designed for reaction-critical manipulation without large-scale robot-data pretraining. ReflexVLA enhances temporal reasoning through latent future prediction and multi-frame temporal fusion within the vision backbone, while reducing deployment latency through batched visual encoding and CUDA Graph replay. Experiments show that ReflexVLA consistently improves dynamic manipulation performance while maintaining competitive accuracy on standard static manipulation benchmarks, and real-world experiments further demonstrate its effectiveness under practical deployment conditions. Project website: https://reflexvla.github.io

Reinforcement learning is promising for autonomous urban driving, but long-horizon goal-directed navigation asks a policy to acquire several competing behaviors at once–reaching a distant goal, tracking a route, avoiding obstacles, obeying signals–and a fixed objective gives no order in which to learn them. This paper presents CORAL, which advances two schedules together: a five-stage curriculum that progressively lengthens routes and tightens behavioral constraints, and a stage-aware reward whose component weights shift emphasis from mission progress toward route following, safety, smoothness, and rule compliance as the task hardens. The policy is a multi-stream actor-critic network trained with Proximal Policy Optimization (PPO) in CARLA on a compact 99-dimensional state pairing a polar LiDAR histogram with vehicle telemetry, ego-frame route geometry, and traffic-rule indicators–no point-cloud encoder, no bird's-eye-view rasterization. Against two PPO baselines under an identical protocol, CORAL reaches the goal in all twenty evaluation episodes on the longest routes under the full set of behavioral constraints, where the baselines reach 5% and 10%; a factorial ablation shows that neither schedule alone matches their combination: removing either lowers both success and route completion, and disabling both drops success to 55%. Trained in one town, the policy transfers zero-shot to seven unseen towns, succeeding in 68-98% of episodes on routes of the same 100-150 m length, with mean lateral deviation below 0.35 m.

Fine-grained robotic evaluation matters for understanding embodied models, going beyond binary success rates and rule-based process scores. We present PRM-as-a-Judge 1.5, a toolkit for robot process assessment that turns rollout videos into dense progress curves and derives multiple fine metrics. PRM-as-a-Judge 1.5 introduces three metrics, building on version 1.0, that characterize failure-side progress, post-drawdown recovery, and success-side execution quality, helping users understand embodied model capability. Based on the rollout videos from benchmarks, we perform a comprehensive assessment of the embodied models, providing some fine-grained metric results and key findings. We further introduce RoboPulse++ to evaluate the reliability of process reward models (PRM), providing evaluators with a more accurate testing platform. Moreover, we release a user-friendly assessment suite, including the benchmark, metric implementation, and visualization tools, to support reproducible manipulation process evaluation. We call on the community to rethink how robots are evaluated and establish transparent, procedural, and reproducible assessment as a foundation for the next generation of embodied intelligence.

LiDAR bundle adjustment is widely utilized in mapping to construct globally consistent point cloud maps. In this paper, we propose the first fully parallel computing framework to accelerate LiDAR bundle adjustment for large-scale mapping, incorporating three key techniques. First, we design an adaptive, asynchronous data loading strategy to efficiently process large-scale point cloud datasets on memory-constrained GPUs. Secondly, we present a novel bottom-up voxelization method for extracting planar features, enabling fully parallelized pre-processing. Thirdly, we build upon a majorization-minimization formulation to accelerate compute-intensive tasks in the optimization via parallel computation, including the computation of residuals, Jacobian and Hessian matrices, and a parallel increment solver. To support our design, we provide both theoretical and experimental analysis of the time complexity of our approach. Extensive benchmarking on large-scale public datasets across various computational platforms validates the robustness and adaptability of our approach, achieving up to a tenfold improvement in computational efficiency while preserving mapping accuracy comparable to state-of-the-art methods. To benefit future research, the implementation code is available on GitHub.

In large and heavy structures, vibrations arise during motion, posing significant challenges for precise manipulation. To accomplish the desired motion, control algorithms must effectively suppress these structural vibrations. In cutting edge projects, such as remote maintenance of future fusion energy reactors (tokamaks), the manipulation of this type of structure is defined as a crucial task. This paper presents a control strategy to suppress transverse vibrations in flexible payloads during motion using a collaborative payload manipulation approach. Two different industrial robot arms are arranged in a leader follower configuration for the manipulation strategy. The leader robot guides the motion with shaped velocity commands, while the follower robot ensures compliance with the estimated external forces applied by the leader on the payload through an admittance controller. Unlike existing methods, the proposed approach enables collaborative manipulation of heavier and larger flexible objects, addressing additional challenges such as vibration suppression and heterogeneous robot specifications. The dynamics of the leader follower payload system are modeled using an equivalent mass spring damper model, and it is shown that, with appropriate admittance parameters, the total energy of the system is passively dissipated. A stability proof is also provided. Numerical simulations validate the proposed method, and experimental results demonstrate its effectiveness.