Peer Revenue Publish or profit

Papers

Fresh from arXiv, typeset properly. Highlighted words trade on the market.

Physics

Watch Physics (sign in to use)

Monday 20 April

Plasma Physics

Intense tunable terahertz radiation from phase-matched difference frequency generation in strongly magnetized plasmas

High-energy terahertz pulses are challenging to produce due to the low conversion efficiency and limited optical damage threshold of nonlinear crystals. Here, we describe the high-efficiency generation of terahertz radiation pulses with tunable frequency and field strengths exceeding 500 GV/m by propagating two-color laser pulses through a strongly magnetized plasma. The field strength is substantially enhanced by utilizing two extraordinary-mode branches to minimize the phase mismatch. We derive the phase-matching conditions and characterize the nonlinear coupling analytically, and validate these predictions with particle-in-cell simulations. These results establish a new pathway toward next-generation intense terahertz sources with performance well beyond the limits of existing plasma mechanisms and conventional crystal-based approaches.
Read the full abstract

Atmospheric and Oceanic Physics

Instability-Aware Steering of an Extreme Atmospheric River in an AI Weather Foundation Model

Advances in deep learning methods for weather forecasting are creating opportunities to computationally explore the potential for steering or control of extreme weather trajectories for societal risk reduction. We present initial investigations into the feasibility of redirecting extreme atmospheric rivers (ARs) through small, instability-aware perturbations. Using the Aurora AI weather foundation model, we identify sensitive upstream locations using finite-time Lyapunov exponents and jet-eddy interaction criteria. We apply an idealized cloud-seeding operator that mimics latent heat release to assess whether these Lyapunov-guided interventions can influence downstream evolution. In a case study of a severe California AR, perturbations induce coherent downstream shifts in moisture transport, reducing intensity at landfall under favorable kinematic conditions. The response is nonlinear and contingent on the local flow geometry. These initial results suggest that the atmosphere's intrinsic chaotic sensitivity could be leveraged for dynamical control, offering a new research direction for extreme event risk mitigation.
Read the full abstract

High Energy Astrophysical Phenomena

Cosmic Ray Electron Evolution in Supernova Remnants: Log-Parabola Distribution

The shock fronts of supernova remnants (SNRs) are believed to be significant sites of acceleration of cosmic ray particles. Previous researchers have shown that a particle distribution similar to a log-parabola can be generated when particles have an energy-dependent escape. We explore the acceleration of electrons at SNR shock fronts, and show that modeling this energy-dependent particle escape model can produce spectral energy distributions consistent with observations of two lepton-radiation-dominated SNRs: RX J1713.7-3946 and SN 1006. The model includes the evolution of both the electron distribution and photon spectra as a result of the combined effects of the SNR evolution and electron energy loss. The electron-escape energy dependence is quite weak, but the electron distribution and photon spectra turn out to be very sensitive to changes in the electron escape. We also explore how sensitive the spectra and electron distributions are to the parameters used in the log-parabola model.
Read the full abstract

Statistical Mechanics

Energy landscape of the kagome antiferromagnet: Characterization of multiple energy scales

We investigate the energy landscape of the kagome Heisenberg antiferromagnet within its coplanar ground-state manifold. Although coplanar states are degenerate at harmonic order, transitions between them require collective weathervane-loop rotations whose barriers grow strongly with loop size. To characterize this structure, we construct disconnectivity graphs using two complementary approaches: exact enumeration and minimax-barrier calculations for small lattices, and a statistical construction for large lattices based on random walks through configuration space, with loop length used as a proxy for barrier height. The exact landscape reveals a dominant low-barrier scale associated with elementary six-spin loops and a broader higher-barrier sector from longer rearrangements. For large systems, the statistical analysis exposes a hierarchy of barrier scales, including a pronounced six-spin-loop peak and an intermediate scale-free regime of loop lengths. This hierarchy provides a natural basis for multiple dynamical time scales: six-spin loops govern the fastest local relaxation, while slower collective dynamics arise from activation of longer loops. These results show that the coplanar manifold is dynamically rugged, with its low-energy dynamics governed by a hierarchy of loop-mediated barriers.
Read the full abstract

Fluid Dynamics

Application of Metric-Based Mesh Adaptation to Hypersonic Aerothermal Simulations Using US3D

The main goal of this paper is to demonstrate the application of metric-based mesh adaptation to real gas problems and highlight the benefits particularly when complex geometries are considered. We use the Hessian of the temperature solution as an indicator to dictate where the mesh needs refinement or coarsening. In the context of hypersonic flow simulations, these methods are not widely adopted since unstructured meshes often result in poor surface heating predictions. The present work aims to demonstrate the great flexibility metric-based mesh adaptation provides when it comes to predicting complex flow features while still maintaining comparable surface heating predictions. We consider two test cases: (a) a supersonic flow over a hemisphere and show that comparable surface heating is obtained by applying mesh adaptation and by employing hexahedra instead of prisms in the boundary layer mesh; (b) we consider a more realistic test case of a hypersonic flow of a C02-N2 mixture past a 70 degree sphere cone atmospheric entry capsule. For the second test case, similar surface heating predictions are obtained compared to more conventional block structured DPLR simulations. Furthermore, for the adapted unstructured simulations, the geometries of the eight Reaction Control System (RCS) jet on the back shell were taken into account. This highlights the ability of these methods to deal with complex geometries that are typically out of reach for block structured approaches.
Read the full abstract

High Energy Physics (Theory)

The Hilbert Series and the Flavor Invariants of the 3HDM

We perform a systematic study of invariant operators in the three-Higgs-doublet model (3HDM). We compute the closed-form multigraded Hilbert series associated with the global symmetry group of the theory. In addition, we construct explicit expressions for the corresponding invariant operators up to cubic order in the couplings. As a phenomenological application, we further organize the invariants up to quadratic order in the field content into CP-even and CP-odd combinations. For the special case of invariants involving no $\mathbf{27}$ representations, our results are complete to all orders.
Read the full abstract

Quantum Gases

Stabilization of bulk quantum orders in finite Rydberg atom arrays

Arrays of ultracold neutral atoms, also known as Rydberg atom arrays, are rapidly developing into a powerful and versatile platform for quantum simulation. However, theoretical predictions about the bulk quantum phases of matter present in these systems have often diverged from experimental realizations on finite-sized arrays due to the strong effects of the boundaries. Here we propose a general, experimentally straightforward strategy to mitigate the effects of the boundaries and thus enable finite-sized arrays to stabilize bulk-like quantum order. Our scheme makes use of the properties of the ubiquitous disordered phase in Rydberg systems, driving the boundaries into an unbiased set of configurations that depend on the bulk physics. We numerically demonstrate the efficacy of this protocol in one- and two-dimensional systems on both ordered and critical phases.
Read the full abstract

Optics

Volumetric Processing of Structured Light Integrated in Glass

Light with complex structures in polarization, phase and amplitude, has attracted a lot of attention in a broad range of applications and fundamental studies in classical and quantum optics. Along with the increased interest in structured light comes a need for efficient modulation platforms operating simultaneously for many modes. Multi plane light conversions (MPLC), i.e., multiple consecutive phase modulations in combination with free space propagation, have enabled such unitary transformations, which are usually built by bulky optical components, limited to scalar modulation, or rely on advanced nanofabrication techniques. Here, we demonstrate an efficient, monolithic MPLC architecture through direct laser writing in standard fused silica glass, resulting in a device with a compact form factor of only a few cubic millimeters. Our scheme is based on volumetric engineering of the glass's birefringence through laser-written nanogratings, which enables spatial control over full vectorial light structures. To showcase the approach's potential for integrated multimode-multipath optical networks, we demonstrate multi-mode unitary transformations, mode conversions, and complex beam-splitting for scalar light. We further extend the MPLC operation to vectorial light and implement various polarization-controlled spatial mode operations as well as the transformation of the topology of an optical Skyrmion. Finally, we highlight our scheme's promise for optical communications and implement a miniaturized multiplexer for spatial modes and polarization operating at telecom wavelength.
Read the full abstract

Quantum Physics

Understanding Quantum Instruments

The quantum instrument (QI) formalism is required to model mid-circuit measurements (MCMs) and the dependence of the post-measurement state on the measurement outcome. Correctly modeling QIs is essential for applications using MCMs, such as adaptive circuits and quantum error correction. Although QIs yield a joint quantum-classical state after measurement, errors in QIs can still be represented by a $d^2 \times d^2$ superoperator (e.g., process or transfer matrix) for each outcome, just as superoperators describe Markovian errors on unitary gates. However, because the joint quantum-classical system has a distinct error model for each outcome, this complicates the usual interpretation of process- or transfer-matrix error models. This Note offers practical guidance on understanding and interpreting QI error models.
Read the full abstract

Optics

Inverse designed full-Stokes polarimetric metasurface with simultaneous wavefront sensing for visible light

Metasurfaces have emerged as a powerful platform for compact optical sensors by replacing bulky lenses with flat arrays of subwavelength nanostructures. In precision optical metrology, the simultaneous mapping of a beam's polarization state and wavefront is crucial for real-time diagnostics of stress-induced birefringence and surface flatness. To achieve this in a compact footprint, existing metasurfaces typically partition their aperture into discrete zones, which inherently restricts the light-gathering efficiency and numerical aperture of the system. Here we demonstrate an inverse-designed metasurface that integrates full-Stokes polarimetry and Shack-Hartmann wavefront sensing within a single, continuous aperture in the visible spectrum. By leveraging an adjoint optimization approach to independently control the geometry and rotation of each nanostructure, we break the aperture-sharing paradigm and utilize the entire pixel area for all channels. When coupled with a shallow neural network to automate peak identification and correct for hardware non-idealities, our device yields a mean polarization reconstruction error of only 0.046 across 100 test states on the Poincaré sphere, while simultaneously maintaining the precise focal-spot tracking required for sensitive wavefront tilt detection. This work highlights the capacity of inverse design to generate multifunctional, non-intuitive flat optics that outperforms its traditional counterparts.
Read the full abstract

All authors Ondřej Červinka, Martin Hrtoň, Štěpán Venos, Jakub Lelek, Libor Úlehla, Tomáš Šikola, Filip Ligmajer

Pattern Formation and Solitons

Chiral solitary waves in a nonlinear topological insulator model

An outstanding challenge in the field of topological insulators is the realization of nonlinear systems that support coherent traveling waves. Highly nonlinear lattices can suffer from significant radiation losses due to Peierls-Nabarro effects. In this work a nonlinear tight-binding model that supports robust traveling edge states is proposed and examined. This system possess a nontrivial local Chern topology and soliton-like states. When a traveling solitary wave collides with a stationary mode, the two are observed to interact inelastically. These results suggest future directions for the modeling, realization, and application of nonlinear Chern insulators.
Read the full abstract

Applied Physics

Electrochemical reactions under reverse bias create additional mobile ions that enable hole tunneling in metal halide perovskite diodes

Gradual reverse-bias breakdown in metal-halide perovskite diodes and solar cells is thought to originate from hole tunneling through steep bands in an ionic depletion region near the electron transport layer after positively charged iodine vacancies accumulate near the hole-transport layer (HTL). However, typical reported mobile ion concentrations near $1\times10^{17}$ cm$^{-3}$ are too small to quantitatively explain significant tunneling current densities and (Zener) breakdown observed near $-5$ V. Here, we show that inferred mobile ion concentrations increase by more than 100$\times$, to over $1\times10^{18}$ cm$^{-3}$, within just three minutes of reverse bias at $-6.0$ V in p-i-n perovskite diodes. We attribute the increase in mobile ion concentration to iodide oxidation and the resulting iodine vacancy creation which must be balanced by reduction reactions near the HTL. Thin and sub-optimal HTL coverage leads to direct contact between the transparent conducting electrode and perovskite and facilitates electron transfer and reduction, enabling the creation of even larger inferred mobile ion concentrations ($\sim1\times10^{19}$ cm$^{-3}$) and leading to faster degradation under reverse bias. This explains previous work that showed increased breakdown voltages and improved reverse-bias stability by implementing thick, uniform HTLs.
Read the full abstract

All authors Kell Fremouw, Ryan A. DeCrescent, Xianfu Zhang, Yi Yang, Bin Chen, Daniel A. Morales Jr, Matteo R. S. Poma, Kelly Schutt, Fangyuan Jiang, Edward H. Sargent, Neal R. Armstrong, David S. Ginger, Joseph M. Luther, Michael D. McGehee

General Relativity and Quantum Cosmology

String-inspired Gauss-Bonnet Gravity Inflation and ACT

In this article we present a systematic observational verification of the ghost-free string-inspired $f(R,\mathcal{G})$ model, where the Gauss-Bonnet invariant is non-minimally coupled to an auxiliary scalar field $\chi$ through the coupling function $h(\chi)$. Previous studies confirmed the theoretical viability of this framework using phenomenological parameter choices. In this work, for the first time, a systematic comparison with observational data from Planck 2018 and the Atacama Comsology Telescope is carried out via a Bayesian MCMC analysis using the Cobaya code. We explore an extended set of sixteen models constructed from four types of the Hubble parameter combined with power-law, exponential, hybrid, and inverse logarithmic coupling functions $h(\chi)$. The hybrid coupling $h(\chi) = \gamma e^{b_1\chi}\chi^{b_2}$, introduced in this context, allows for interpolation between the power-law and exponential forms, providing additional flexibility in controlling the Gauss-Bonnet contribution at different stages of inflation. All sixteen models reproduce the red spectral tilt of scalar perturbations consistent with CMB observations, yielding $n_s \approx 0.97$ at $N = 60$ e-folds. We find that the preference for the dataset is systematically determined by the choice of Hubble parametrization rather than by the coupling function. The parameter $\mu\approx0.1$ remains stable in all configurations, suggesting its fundamental role within the ghost-free formalism.
Read the full abstract

All authors S.D. Odintsov, V.K. Oikonomou, Pyotr Tsyba, Olga Razina, Dauren Rakhatov

Cosmology and Nongalactic Astrophysics

Testing $\Lambda$CDM versus dynamical dark energy in one year: A DESI spectroscopic follow-up program for Rubin supernovae

Combined cosmological probes currently indicate that best-fit values in the $w_0-w_a$ parametrization of dynamical dark energy deviate from $\Lambda$CDM by $\sim3\sigma$. In this work, we present a supernova survey capable of measuring dynamical dark energy at the $>5\sigma$ level with just one year of data, starting in 2027. We first show that with the present values of $w_0$ and $w_a$, new SNe Ia at redshifts $z\lesssim0.6$ near dark energy-matter equality would add the most constraining power. This is well within reach of the Vera C. Rubin Observatory and the Dark Energy Spectroscopic Instrument (DESI). Because cosmology measurements with SNe Ia quickly become systematics-limited, we focus on eliminating key systematics by using only a spectroscopically confirmed and volume-limited sample. In our proposed survey, SN alerts from Rubin would actively re-prioritize the scheduling of already-planned DESI tile visits. This would yield 7 500 near-peak transient spectra in one year without delaying DESI's primary survey. We forecast that if current best-fit $w_0-w_a$ values persist, combining just our volume-limited subset of 2 300 new SNe Ia at $z<0.3$ with current SN, BAO, and CMB data would push the tension with $\Lambda$CDM beyond $5\sigma$. This applies across a wide range of assumed uncertainties. To further circumvent systematics, we explore how DESI enables spectroscopic standardization via machine learning, offering a path toward a cosmology measurement independent of light-curve-based standardization. Finally, we discuss how early results from this program could inform future dark energy experiments.
Read the full abstract

All authors Jannik Truong, Greg Aldering, Saul Perlmutter, David Rubin, David Schlegel

Mesoscale and Nanoscale Physics

Landau levels and magneto-optics in 30$^\circ$ quasi-periodic twisted bilayer graphene

We develop a theoretical framework for Landau levels in quasi-periodic twisted bilayer graphene at a $30^\circ$ twist angle, a system without translational symmetry but possessing 12-fold rotational symmetry. Using a quasi-band formalism, we incorporate the magnetic field through a conventional momentum substitution in the zero-field Hamiltonian. This approach provides a transparent physical interpretation by directly relating the Landau levels to the quasi-band structure, allowing them to be understood as quantized orbits of quasi-band pockets. By using this method, we reveal distinctive spectral features, including nearly flat bands with weak magnetic-field dependence and highly degenerate levels arising from twelve off-center pockets. The resulting Landau levels are classified by two quantum numbers: the Landau-level index and the angular momentum associated with the underlying quasicrystalline symmetry. We also compute the magneto-optical conductivity and show that optical transitions follow angular-momentum selection rules enforced by the 12-fold symmetry. Our approach provides a symmetry-based and computationally efficient framework for bulk quantum magneto-optics in quasicrystalline van der Waals systems, predicting spectroscopic signatures accessible in high-field infrared and THz experiments.
Read the full abstract

Biological Physics · Cross-listed from q-bio.CB

Intrinsic stochasticity in cell polarity and contact inhibition of locomotion

When cells collide, they often exhibit "contact inhibition of locomotion" (CIL), a behavior in which cells repolarize and migrate away from the site of contact. Experimental CIL outcomes are highly variable - why? Here, we develop a minimal stochastic model to quantify how intrinsic noise in cell polarity, arising from the finite number of signaling molecules, influences CIL decision-making. We simulate polarization dynamics by tracking individual Rho GTPase proteins that diffuse and switch stochastically between the cell membrane and cytosol. In the absence of cell-cell contact, the polarity axis diffuses rotationally - the cell's orientation wanders - with a diffusion coefficient that decreases as Rho GTPase copy number increases. Assuming that cell-cell contact inhibits Rho GTPase activation, we investigate how contact geometry, duration, and strength affect CIL sensitivity. At low protein copy number, weak, brief, or spatially narrow contacts are masked by molecular noise. In contrast, at high protein copy number, intrinsic polarity noise is negligible, and randomness in CIL response is more likely to reflect the variability from collision to collision in the cell-cell contact properties.
Read the full abstract

Quantum Physics

Trainability Beyond Linearity in Variational Quantum Objectives

Barren-plateau results have established exponential gradient suppression as a widely cited obstacle to the scalability of variational quantum algorithms. When and whether these results extend to a given objective has been addressed through loss-specific arguments, but a general structural characterization has remained open. We show that the objective itself admits a fixed-observable representation if and only if the loss is affine in the measured statistics, thereby identifying the exact boundary of the standard concentration-based proof template. Existing transfer results for non-affine losses achieve this reduction under additional assumptions; our characterization implies that such a reduction is not structurally available for a class of non-affine objectives, placing them outside the automatic reach of the existing proof template. Beyond the affine regime, a chain-rule decomposition reveals three governing factors – model responsivity, loss-side signal, and transmittance – and induces a loss-class dichotomy: bounded-gradient losses inherit suppression, while amplification-capable losses can in principle counteract it. In the exponentially wide setting, both classes fail, but for different structural reasons. When the interface is instead designed at polynomial width – exposing coarse-grained statistics rather than individual bitstring probabilities – the exponential-dimensional obstruction is relaxed and the dichotomy plays a genuine role. In a numerical demonstration on a charge-conserving quantum system, the amplification-capable objective produces resolved gradients several orders of magnitude larger than affine and inheriting baselines at comparable shot budgets. Over the tested interval, its scaling trend is statistically distinguished from the exponential trend of both alternatives. The boundary is affine; what lies beyond it is a representation-design problem.
Read the full abstract

Instrumentation and Methods for Astrophysics

Pulsar Selection Criteria and Performance Evaluation of Autonomous X-ray Pulsar Navigation Systems

Current space missions primarily depend on Earth-based Guidance, Navigation, and Control (GNC) systems involving human-in-the-loop operations. X-ray pulsar-based navigation offers a promising alternative by using the very precise periodic X-ray emissions from pulsars for fully autonomous state estimation. This study presents a comprehensive analysis of pulsar selection criteria that significantly influence overall navigation performance. Observational data from the NICER mission is used to derive realistic estimates of measurement noise. Key mission-level constraints, including pulsed flux, pulsar visibility, geometric configuration, and long-term timing stability, are integrated into the pulsar selection process, addressing limitations of existing studies. An extended Kalman filter (EKF) is used for onboard spacecraft state estimation. The proposed system is evaluated in two scenarios: a Low Earth Orbit (LEO) satellite at 600 km altitude and an interplanetary transfer from Earth to Jupiter. Simulation results show that including the Crab pulsar yields position errors below 7 km in LEO and 20 km during interplanetary transfer with an instrument effective area of 200~cm$^2$; however, the Crab's limited timing stability leads to filter divergence after 20 days without timing model updates. In contrast, more stable pulsars enable long-term autonomy but with reduced accuracy. These results highlight the trade-offs involved in pulsar selection for autonomous navigation and the need to balance competing objectives. Overall, this study demonstrates the feasibility of X-ray pulsar-based navigation and marks a key step towards fully autonomous spacecraft operations.
Read the full abstract

All authors Sui Chen, Emilie Parent, Nanda Rea, Francesco Topputo

Superconductivity

Stripping Symmetry: Electrochemical Oxidation to a Superconducting Polar Metal in Au2Pb0.914P2

Polar metals and noncentrosymmetric superconductors are exceptionally rare, yet their broken inversion symmetry can give rise to emergent electronic phenomena including mixed singlet-triplet superconducting pairing. As only a few such materials have been found among known compounds, accessing new examples requires synthetic strategies that go beyond conventional crystal growth. Here, we use electrochemical topotactic deintercalation to remove Pb from the centrosymmetric parent compound Au$_2$PbP$_2$, producing the polar metal Au$_2$Pb$_{0.914}$P$_2$. Unlike conventional chemical doping, this transformation actively drives structural symmetry-breaking: the partial removal of Pb triggers a cooperative electronic and geometric rearrangement, mediated by a second-order Jahn-Teller effect and stereochemically active lone pairs, that locks the product into a polar, noncentrosymmetric superspace group Ama2(01g)ss0. We solve the complete (3+1)D modulated structure by synchrotron single-crystal X-ray diffraction and confirm the polar assignment through nonlinear electronic transport. Below T$_c$ = 1.52 K, Au$_2$Pb$_{0.914}$P$_2$ becomes a type-II superconductor whose heat capacity and AC susceptibility both exhibit power-law behavior, suggestive of a gap structure governed by the broken inversion symmetry of the host lattice. This work establishes electrochemical oxidation as a rational route to metastable noncentrosymmetric superconductors through chemically directed symmetry-breaking.
Read the full abstract

All authors Scott B. Lee, Stephanie R. Dulovic, Joseph W. Stiles, Xin Zhang, Fatmagül Katmer, Sudipta Chatterjee, Jaime Moya, Allana G. Iwanicki, Abby N. Neill, Chris Lygouras, Tieyan Chang, Tyrel M. McQueen, Yu-Sheng Chen, Leslie M. Schoop

Quantum Physics

QuIC: A Training-Free Quantum Graph Embedding from Ideal Analysis to Practical Hardware Evaluation

We introduce QuIC, a training-free quantum graph embedding that maps graphs to sorted output distributions via a fixed parameterized circuit. In the ideal one-repetition setting, we prove that the resulting sorted distribution is permutation-invariant and injective on labeled graphs under an irrational-angle condition, yielding completeness on isomorphism classes for the ideal one-repetition exact-arithmetic embedding. We then use those ideal structural properties to motivate a practical embedding pipeline and study how much of that behavior survives under finite-shot estimation, truncation, realistic noise, transpilation, and hardware execution. The sorted distribution concentrates discriminative signal in a compact head, making fixed-length head truncation an effective practical operating point in the tested regimes. Under noise-model simulation, all tested graph pairs satisfied the study's operational separation criterion, including strongly regular graph pairs that are standard 2-WL stress tests and CFI families used as hard instances for fixed-k WL methods. A hardware study comprising 14,800 transpiled circuits across 37 CFI families on IBM Heron (ibm_fez, 156 qubits), including paired one- and two-repetition evaluations, reports empirical separation up to 66 qubits for the tested families under the reported execution protocol, identifies a device-dependent depth limit near 210-250 layers, and characterizes the current practical boundary of the method under the reported execution protocol.
Read the full abstract

Quantum Physics · Cross-listed from cs.AI

Quantum inspired qubit qutrit neural networks for real time financial forecasting

This research investigates the performance and efficacy of machine learning models in stock prediction, comparing Artificial Neural Networks (ANNs), Quantum Qubit-based Neural Networks (QQBNs), and Quantum Qutrit-based Neural Networks (QQTNs). By outlining methodologies, architectures, and training procedures, the study highlights significant differences in training times and performance metrics across models. While all models demonstrate robust accuracies above 70%, the Quantum Qutrit-based Neural Network consistently outperforms with advantages in risk-adjusted returns, measured by the Sharpe ratio, greater consistency in prediction quality through the Information Coefficient, and enhanced robustness under varying market conditions. The QQTN not only surpasses its classical and qubit-based counterparts in multiple quantitative and qualitative metrics but also achieves comparable performance with significantly reduced training times. These results showcase the promising prospects of Quantum Qutrit-based Neural Networks in practical financial applications, where real-time processing is critical. By achieving superior accuracy, efficiency, and adaptability, the proposed models underscore the transformative potential of quantum-inspired approaches, paving the way for their integration into computationally intensive fields.
Read the full abstract

Quantum Physics

Benchmarking Quantum Kernel Support Vector Machines Against Classical Baselines on Tabular Data: A Rigorous Empirical Study with Hardware Validation

Quantum kernel methods have been proposed as a promising approach for leveraging near-term quantum computers for supervised learning, yet rigorous benchmarks against strong classical baselines remain scarce. We present a comprehensive empirical study of quantum kernel support vector machines (QSVMs) across nine binary classification datasets, four quantum feature maps, three classical kernels, and multiple noise models, totalling 970 experiments with strict nested cross-validation. Our analysis spans four phases: (i) statistical significance testing, revealing that none of 29 pairwise quantum-classical comparisons reach significance at $\alpha = 0.05$; (ii) learning curve analysis over six training fractions, showing steeper quantum slopes on six of eight datasets that nonetheless fail to close the gap to the best classical baseline; (iii) hardware validation on IBM ibm_fez (Heron r2), demonstrating kernel fidelity $r \geq 0.976$ across six experiments; and (iv) seed sensitivity analysis confirming reproducibility (mean CV 1.4%). A Kruskal-Wallis factorial analysis reveals that dataset choice dominates performance variance ($\varepsilon^2 = 0.73$), while kernel type accounts for only 9%. Spectral analysis offers a mechanistic explanation: current quantum feature maps produce eigenspectra that are either too flat or too concentrated, missing the intermediate profile of the best classical kernel, the radial basis function (RBF). Quantum kernel training (QKT) via kernel-target alignment yields the single competitive result – balanced accuracy 0.968 on breast cancer – but with ~2,000x computational overhead. Our findings provide actionable guidelines for quantum kernel research. The complete benchmark suite is publicly available to facilitate reproduction and extension.
Read the full abstract

Solar and Stellar Astrophysics

Discovery of the First Octupole Pulsation Mode in a delta Scuti Star: A Stationary l = 3 Sectoral Mode

Aims. We are attempting to better understand how stellar pulsations in close binary systems are affected, and possibly induced, by tidal, Coriolis, and centrifugal forces. Methods. We analyzed TESS data for some 50,000 potential eclipsing binaries selected by machine learning algorithms in order to search for pulsation multiplets split by integer multiples of the orbital frequency. Results. We report on the discovery of an octupole pulsation mode in the binary star system TIC 287869463, which contains a delta Scuti star. This mode is actually a combination of Y3+3 and Y3-3 modes that are perturbed into a new eigenmode of the star via tidal, Coriolis, and centrifugal forces, which we call a Y33+ mode. The mode is stationary on the star. To our knowledge, this is the first time that such an l = 3 mode identification has been securely made in any delta Scuti star, and the first stationary l = 3 sectoral mode of this type seen in any star, including the Sun. The l = 3 pulsations appear as a combination of two components at 34.94617 per day and 39.31127 per day, split by exactly six times the frequency of the orbital motion to within better than 1 part in 100,000. We extract the pulsation frequencies from the TESS data spanning more than three years, and model the system to gain a better understanding of this novel asteroseismic discovery. The pulsation frequencies are found to be steadily increasing with time, but always maintaining a split equal to six times the orbital frequency. Conclusions. We discuss the implications for the broader class of "tidally tilted pulsators" and "tri-axial pulsators" that have been discovered to date. We conclude that these previous categories can all be interpreted as linear combinations of spherical harmonics whose axes coincide with the orbital axis and form new eigenmodes of the star via tidal, Coriolis, and centrifugal perturbations
Read the full abstract

All authors S. A. Rappaport, R. Jayaraman, G. Handler, D. Kurtz, V. Zhang, R. Gagliano, B. Powell, J. Fuller, T. Borkovits, V. Kostov, J. Daszyńska-Daszkiewicz

Quantum Physics

Bargmann Scenarios

Considerable effort has been devoted to developing techniques for witnessing and characterizing quantum resources that emerge from collective properties of a set of states. In this context, Bargmann invariants play a central role: they witness coherence and related resources, and underpin important applications. In this work, we introduce a unified formalism that fully characterizes and organizes the capability of Bargmann invariants to witness different manifestations of coherence in sets of states. It is formulated around the construction of Bargmann scenarios, which specify relevant tuples of Bargmann invariants, and Bargmann polytopes, which bound the values that said invariants can have when the states are incoherent. We study their basic geometry, connect them to existing formalisms, and illustrate their physical relevance. Our construction opens new opportunities for the certification of quantum devices and lays the path toward a full quantum resource theory based entirely on multivariate traces of states.
Read the full abstract

Quantum Physics

High-flux sub-Poissonian twin fields generation from warm atomic vapor

We demonstrate the generation of sub-Poissonian twin fields via near-degenerate spontaneous four-wave mixing (SFWM) in warm $^{85}\mathrm{Rb}$ vapor at 795~nm. When seeded with a weak coherent field, the generated twin beams exhibit approximately $5.5~\mathrm{dB}$ of intensity-difference squeezing in free space and retain about $3~\mathrm{dB}$ after coupling into polarization-maintaining (PM) fibers. Under vacuum seeding, time-resolved photon-counting measurements yield Mandel parameters of $Q\approx-0.7$ for each individual field, demonstrating strong photon-number squeezing. To explain these observations, we develop a finite-resource saturation model in which occupation-dependent SFWM gain, arising from competition for a finite nonlinear gain resource, suppresses large photon-number fluctuations within an effective collective mode selected by the PM-fiber spatial projection, thereby producing the observed negative Mandel-$Q$ parameters. The temporal cross-correlation between the twin photons exhibits a distinctive flat-topped profile resulting from the interplay of multiple $\chi^{(3)}$ processes in the atomic medium and is in excellent agreement with the theoretical model. Combining high photon flux, near-resonant operation, robust sub-Poissonian photon statistics, and fiber compatibility, this source provides a promising platform for scalable quantum-enhanced sensing and quantum information processing.
Read the full abstract

All authors Priya Drashni, Hari P. Lamsal, Belle A. White, Noah A. Crum, George Siopsis, Tian Li

Computational Physics · Cross-listed from cs.LG

The High Explosives and Affected Targets (HEAT) Dataset

Artificial Intelligence (AI) surrogate models provide a computationally efficient alternative to full-physics simulations, but no public datasets currently exist for training and validating models of high-explosive-driven, multi-material shock dynamics. Simulating shock propagation is challenging due to the need for material-specific equations of state (EOS) and models of plasticity, phase change, damage, fluid instabilities, and multi-material interactions. Explosive-driven shocks further require reactive material models to capture detonation physics. To address this gap, we introduce the High-Explosives and Affected Targets (HEAT) dataset, a physics-rich collection of two-dimensional, cylindrically symmetric simulations generated using an Eulerian multi-material shock-propagation code developed at Los Alamos National Laboratory. HEAT consists of two partitions: expanding shock-cylinder (CYL) simulations and Perturbed Layered Interface (PLI) simulations. Each entry includes time series of thermodynamic fields (pressure, density, temperature), kinematic fields (position, velocity), and continuum quantities such as stress. The CYL partition spans a range of materials, including metals (aluminum, copper, depleted uranium, stainless steel, tantalum), a polymer, water, gases (air, nitrogen), and a detonating material. The PLI partition explores varied geometries with fixed materials: copper, aluminum, stainless steel, polymer, and high explosive. HEAT captures key phenomena such as shock propagation, momentum transfer, plastic deformation, and thermal effects, providing a benchmark dataset for AI/ML models of multi-material shock physics.
Read the full abstract

All authors Bryan Kaiser, Kyle Hickmann, Sharmistha Chakrabarti, Soumi De, Sourabh Pandit, David Schodt, Jesus Pulido, Divya Banesh, Christine Sweeney

Instrumentation and Methods for Astrophysics

Design of a mission to measure the shape and substructure of the 511 keV gamma-ray line from the center of the Milky Way

The 511 keV electron-positron annihilation feature near the galactic center has been detected for more than half a century, yet its origin remains a mystery. In this paper, we describe a concept for a balloon-borne 511 keV $\gamma$-ray mission called the 511-Spectrometer Mission. The mission will use Transition-Edge Sensor (TES) arrays with thick metal absorbers that are thermally coupled to the TES. The strength of the approach is a projected energy resolution of 200 eV Full Width Half Maximum (FWHM) at 511 keV, enabling detailed studies of the shape and substructure of the 511 keV emission from the galactic center region. A first mission equipped with 8,192 $\gamma$-ray detectors and a fully active shield and collimator could detect the galactic center with ~35 $\sigma$ statistical significance. We present the mission concept as well as first results obtained with a prototype detector equipped with $1.35\times1.35\times2$ mm$^{3}$ Bi absorbers. The detector has a quantum efficiency of 15% for 511 keV photons in photoelectric effect interactions. In tests with a $^{137}$Cs source, these prototype detectors show an energy resolution of 525 eV FWHM at 662 keV. We end with a discussion of follow-up missions that use coded mask imaging, or use concentrating or focusing optics to scrutinize the sources of 511 keV $\gamma$-rays on smaller angular scales.
Read the full abstract

All authors Kun Hu, Matthew Fritts, Daniel Becker, Daniel Schmidt, Fang Zhou, Adrika Dasgupta, Fabian Kislat, Mark Keller, Sohee Chun, Argen Gian Detoito, Ephraim Gau, Xiaoyue Jin, Douglas Bennett, Dana Braun, Johnathon Gard, John A. B. Mates, Jason Nobles, Danny Radomski, Nicole Rodriguez Cavero, Ryan Snodgrass, Daniel Swetz, Joel Ullom, Shravan Vengalil Menon, Joel Weber, Kasun Wimalasena, Henric Krawczynski

Computational Physics

Nonuniform Iterative Phasing Framework and Sampling Requirements for 3D Dynamical Inversion from Coherent Surface Scattering Imaging

Coherent surface scattering imaging (CSSI) is an emerging experimental technique uniquely suited to probing the structure of thin nanostructures. In these experiments, a specimen is placed on a substrate, and a series of X-ray diffraction patterns is collected at grazing incidence angles as the specimen is rotated. However, reconstructing the specimen's 3D structure from the data is challenging due to dynamical scattering effects induced by the experimental geometry and the lack of direct phase measurements. Specifically, the data involves nonuniformly sampled Fourier-transform values of the specimen density, and failure to effectively address this nonuniformity can lead to errors or degraded performance. Here we introduce a mathematical inversion framework that combines iterative-projection-based phasing techniques with new fast nonuniform Fourier inversion methods to efficiently reconstruct isolated 3D structures from their CSSI rotation-series data. We also analyze the theoretical properties of CSSI reconstruction to derive requirements on experimental parameters and characterize solution uniqueness. We validate our approach using CSSI data simulated from a conical Siemens star and a porous medium, demonstrating that high-resolution 3D structures can be reconstructed even in the presence of significant dynamical scattering, from data collected at as few as one or two incident angles. More broadly, the presented nonuniform reconstruction framework provides a foundation for solving challenging generalizations of the phase problem in which measurements involve nonlinear combinations of nonuniformly sampled Fourier values.
Read the full abstract

All authors Jeffrey J. Donatelli, Miaoqi Chu, Zixi Hu, Zhang Jiang, Nicholas Schwarz, Jin Wang, James A. Sethian

Instrumentation and Methods for Astrophysics

SAGUI: SED-based Segmentation of Multi-band Galaxy Images – Application to JADES in GOODS-South

We present sagui, a modular framework for the analysis of multi-band imaging data in spatially resolved galaxies, with synergies to integral-field spectroscopy (IFS). Building on the spectro-spatial paradigm introduced by capivara for IFS data, sagui extends this approach to imaging datasets, enabling a coherent, pixel-level treatment of spatial and spectral information across multiple bands. The method follows a two-stage strategy: a starlet-based decomposition is first used to identify and mask spatial structures across multiple scales while suppressing noise, and a spectral-similarity analysis then partitions the image into coherent pixel groups that preserve spectral consistency. In addition to compact and high-contrast structures, the framework incorporates a dedicated statistical treatment, based on a copula transform, to identify and recover faint, diffuse low-surface-brightness components. We demonstrate the method across a diverse range of galaxy morphologies, highlighting its ability to characterize complex spatial structures, including clumps, bars, interacting systems, and low-surface-brightness features. As a case study, we apply it to eleven morphologically diverse galaxies from the James Webb Space Telescope Advanced Deep Extragalactic Survey in the GOODS–South field. sagui is released under an MIT license and is available at https://rafaelsdesouza.github.io/sagui/.
Read the full abstract

All authors Rafael S. de Souza, Andressa Wille, Shravya Shenoy, Aarya A. Patil, Alberto Krone-Martins, Ana L. Chies-Santos, Celine Boehm, Reinaldo R. Rosa, Thallis Pessi, Emille E. O. Ishida, Kristen C. Dage, Lilianne Nakazono, Phelipe Darc, Rupesh Durgesh

Astrophysics of Galaxies

Analysis of synthetic OVI absorption associated with galaxy groups in SIMBA and TNG50 simulations

We compare OVI absorption in synthetic spectra from galaxy groups in the SIMBA and TNG50 cosmological hydrodynamic simulations against those observed from the COS-IGrM survey. We select 14 galaxy groups from each simulation with $12.89 \le \log(M_{\rm halo}/M_\odot) \le 13.61$, closely matching COS-IGrM, and create 90,000 synthetic spectra per group. We demonstrate the utility of synthetic absorption spectroscopy when comparing simulations with QSO absorption-based observations. We investigate absorber properties such as radial distributions and kinematics with respect to the group and nearest galaxy. The OVI covering fraction ($f_{\rm OVI}$) in TNG50 ($20.62 \pm 2.56\%$) and SIMBA ($5.98 \pm 0.82\%$) are both systematically lower than COS-IGrM ($44 \pm 5\%$). Kinematic analysis reveals that vast majority ($\sim 95\%$) of absorbers in both the simulations are gravitationally bound. In TNG50, strong absorbers ($\log N_{\rm OVI} > 15$) are located near star-forming galaxies ($\log {\rm sSFR} > -11$) within $\sim 200$kpc, suggesting physical connection to stellar feedback, whereas SIMBA shows no comparable trend. Furthermore, in TNG50 occurrence of OVI absorbers at small impact parameters increases with stellar mass of nearest galaxy, but shows no dependence on total stellar mass of group. In contrast, SIMBA shows no clear correlation with nearest galaxy's stellar mass, though groups with higher total stellar mass exhibit higher detection rate at larger impact parameters. Differences observed in simulations may arise from feedback models and resolution effects. Finally, we show absorber analysis methodology is important factor when comparing simulations with absorption spectroscopy observations.
Read the full abstract

All authors Tanmay Singh, Sanchayeeta Borthakur, Dylan Nelson, Romeel Davé, Tyler McCabe