Papers

The invariance principle, through which the steady-state behavior of nonlinear systems was introduced by Isidori and Byrnes, is leveraged in this article to bring forth a unifying characterization of the frequency response of nonlinear systems. We show that, for systems under nonlinear periodic excitations, the frequency response can still be defined as a complex-valued function in a phasor form. However, together with suitable notions of gain and phase functions, we show the existence of another function that completes the frequency response and allows quantifying the distortion introduced by the system in the steady-state output. This nonlinear characterization enabled the representation over input frequency and amplitude of the gain, phase, and distortion produced by the system, via a nonlinear enhancement of the Bode diagrams. This graphical representation of the frequency response is well-suited to performance analysis of a nonlinear system and, furthermore, allows for the formulation of the loop-shaping problem for nonlinear systems.

Heart rate variability (HRV) analysis is important for the assessment of autonomic cardiovascular regulation. The inverse Gaussian process (IGP) has been widely used for beat-to-beat HRV modeling. However, dynamic estimation of the IGP parameters remains a critical challenge. Conventional parametric approaches such as autoregressive models might be insufficient to capture the nonlinear characteristics of R-R series. In this study, we investigated whether recurrent neural networks (RNNs) can be used for IGP parameter identification and thereby enhance probabilistic modeling of R-R dynamics. Four representative RNN architectures, namely, GRU, LSTM, Structured State Space sequence model (S4), and Mamba, were compared and evaluated using the Kolmogorov-Smirnov statistics. The results demonstrate the possibility of combining RNN with the IGP for beat-wise R-R series modeling. This approach provides a flexible basis for probabilistic HRV modeling and for future incorporation of more complex physiological mechanisms and dynamic conditions.

We study uplink radio simultaneous localization and mapping (SLAM) in a pre-calibrated phase-coherent distributed MIMO (D-MIMO) system at a minimal sensing-resource operating point: a single-antenna user equipment (UE) transmits one narrowband pilot, and each single-antenna access points (APs) provides one complex observation. We formulate coherent matched-filter imaging over a spatial grid, where the UE, virtual UEs associated with planar reflectors, and point scatterers share an equivalent-source representation. A greedy detect-and-cancel procedure separates these components. Simulations show that, at the considered noise level, weak-target recovery is limited primarily by cancellation residuals and model saturation, rather than by the noise floor.

This paper investigates the uplink capacity of single-input single-output (SISO) systems assisted by a swarm of network-controlled repeaters (NCRs). We develop a rigorous wideband formulation based on OFDM signaling. Starting from the continuous-time passband model, we derive the capacity expression for the repeater-assisted OFDM channel, accounting for amplified noise contributions from multiple repeaters. Numerical results demonstrate that NCRs can substantially enhance system capacity even with simple activation strategies, and that activating only the closest repeater yields nearly the same performance as activating all repeaters, thereby offering significant energy-saving opportunities. These findings highlight the potential of NCR swarms as a cost-effective and scalable solution for coverage extension and capacity enhancement in wideband wireless networks.

Data-driven reachability analysis using matrix zonotopes faces a fundamental challenge: the number of generators in the reachable set grows exponentially during propagation, while current order reduction yields overly conservative approximations in data-driven settings. This paper introduces an orthogonal matrix-based framework that appropriately transfers the coordinate system before reducing the generators of the reachable set, dramatically reducing reachable set volumes. By exploiting the factorized structure of data-driven matrix zonotope generators, we develop several efficient algorithms to solve the problem. Numerical experiments demonstrate order-of-magnitude volume reductions compared to traditional methods, while maintaining comparable generator numbers. Our method provides a practical solution to improve precision in data-driven safety verification.

This letter derives the noncoherent (NC) maximum likelihood (ML) detection rule for LoRa signals under Rician multipath fading channels. The proposed NC-ML detection only requires the channel statistics, not the actual instantaneous channel state information (CSI), which eliminates the overhead associated with channel estimation. Simulation results show that despite the low-complexity, the proposed detection scheme significantly improves the performance of LoRa detection over multipath channels. Notably, in time-invariant channels, the NC-ML receiver can achieve equivalent performance as compared to existing coherent schemes, and even surpasses them when Doppler shift is present, while not relying on the channel estimation nor reference signals extracted from the preamble.

To date, various paradigms of soft-Computing have been used to solve many modern problems. Among them, a self organizing combination of fuzzy systems and neural networks can make a powerful decision making system. Here, a Dynamic Growing Fuzzy Neural Controller (DGFNC) is combined with an adaptive strategy and applied to a 3PSP parallel robot position control problem. Specifically, the dynamic growing mechanism is considered in more detail. In contrast to other self-organizing methods, DGFNC adds new rules more conservatively; hence the pruning mechanism is omitted. Instead, the adaptive strategy 'adapts' the control system to parameter variation. Furthermore, a sliding mode-based nonlinear controller ensures system stability. The resulting general control strategy aims to achieve faster response with less computation while maintaining overall stability. Finally, the 3PSP is chosen due to its complex dynamics and the utility of such approaches in modern industrial systems. Several simulations support the merits of the proposed DGFNC strategy as applied to the 3PSP robot.

Network-controlled repeaters (NCRs) are a low-cost means to extend coverage and strengthen macro diversity in wireless networks. They operate in real time by amplifying and re-transmitting the incoming signal with only hardware-level delays, without requiring any channel state information (CSI) at the repeater itself. However, their power amplifiers (PAs) generate non-linear distortion that is jointly forwarded with the desired signal and can undermine multiuser performance unless the distortion statistics are exploited. This paper develops a distortion-aware (DA) uplink framework for repeater-assisted massive MIMO (RA-MIMO) under PA non-linearities. We adopt a memoryless third-order polynomial model for the repeater PA and characterize the achievable spectral efficiency (SE) using the Bussgang decomposition. Closed-form expressions are derived for the Bussgang gain matrix and the distortion covariance. We also design a DA combining vector that maximizes the effective signal-to-interference-plus-distortion ratio.

Indoor wireless communication environments are strongly influenced by dynamic conditions, which affect channel state information (CSI) and, consequently, the precoding strategy and the selection of the access point (AP). Device-free sensing and localization functionalities can provide information about these conditions, including, for example, the user's position and the position of mobile blocking objects. To model the statistical relationship between the CSI and the provided conditions, we employ a conditional variational autoencoder (cVAE). We treat the user and object positions - referred to as context information - as conditional inputs to the cVAE. The proposed model does not rely on ground-truth CSI and is trained directly on noisy data. Once trained, the framework can infer channel statistics solely from user and blocking object positions, enabling proactive AP selection based on inferred statistical CSI without requiring continuous CSI estimation. Extensive simulations with the state-of-the-art ray-tracing tool Sionna validate the proposed method.

We address the multi-agent motion planning problem where interactions, collisions, and congestion co-exist. Conventional game-theoretic planners capture interactions among agents but often converge to conservative, congested equilibria. Homotopy planners, on the other hand, can explore topologically distinct paths, but lack mechanisms to account for the interdependence of agents' future actions. We propose a unified framework that leverages homotopy classes as structured strategy sets within a receding-horizon setup. At each planning stage, a deterministic homotopy planner generates topologically distinct paths for each agent, conditioned on the joint configuration. To avoid intractable growth of candidate paths, we propose a simple heuristic filtering step that selects a top-$K$ subset of the most suitable congestion-free joint strategies to ensure computational tractability. These serve as initializations for a potential game that enforces homotopy-consistent constraints and yields a generalized open-loop Nash equilibrium (OLNE), with penalties discouraging abrupt strategy shifts in a receding-horizon setting. Simulations with three agents demonstrate improved efficiency (faster completion) and enhanced safety (greater inter-agent clearance, leading to reduced congestion) compared to a local baseline and NH-ORCA that do not reason about homotopies. Hardware trials with two robots and one human demonstrate robustness to irrational behaviors, where our method adapts by switching to alternative feasible equilibria while the baseline game fails.

In process operations, it is desirable to manage the sensitivity of the system output against external disturbance in the form of finite $\mathcal{L}_2$-gain stabilization. This matter is, however, nonsensical for stochastic systems because the stochastic uncertainties in the control input almost always lead to an unbounded $\mathcal{L}_2$ gain from the disturbance to the output. To address this issue, this article develops a novel concept that characterizes the $\mathcal{L}_2$ gain of stochastic systems in a probabilistic way. Combined with a large data set, we formulate a data-driven probabilistic finite $\mathcal{L}_2$-gain stabilization design using noisy trajectory measurements and the disturbance forecast that does not necessarily agree with the actual future disturbance. The design approach consists of a data-driven trajectory estimation algorithm, whose resulting estimation error covariance is nicely integrated into the feasibility conditions for controller synthesis, leading to a convex offline design in the form of linear matrix inequalities. The effectiveness of the proposed design, along with the additional insights provided by the approach, is illustrated via a numerical example.

Mobile robots joining public spaces like sidewalks must care for pedestrian comfort. Many studies consider pedestrians' objective safety, for example, by developing collision avoidance algorithms, but not enough studies take the pedestrian's subjective safety or comfort into consideration. Quantifying comfort is a major challenge that hinders mobile robots from understanding and responding to human emotions. We empirically look into the relationship between the mobile robot-pedestrian interaction kinematics and subjective comfort. We perform one-on-one experimental trials, each involving a mobile robot and a volunteer. Statistical analysis of pedestrians' reported comfort versus the kinematic variables shows moderate but significant correlations for most variables. Based on these empirical findings, we design three comfort estimators/predictors derived from the minimum distance, the minimum projected time-to-collision, and a composite estimator. The composite estimator employs all studied kinematic variables and reaches the highest prediction rate and classifying performance among the predictors. The composite predictor has an odds ratio of 3.67. In simple terms, when it identifies a pedestrian as comfortable, it is almost 4 times more likely that the pedestrian is comfortable rather than uncomfortable. The study provides a comfort quantifier for incorporating pedestrian feelings into path planners for more socially compliant robots.

The abundance of process operating data in modern industries, along with the rapid advancement of learning techniques, has led to a paradigm shift towards data-centric analysis and control. However, integrating machine learning with control theory for big data-driven control of nonlinear systems remains a challenging open problem. This is because the state-based, model-centric, and causal framework of classical control theory fundamentally contradicts the trajectory-based, set-theoretic, and causality-absent rationale of big data-based learning approaches. Using the behavioral framework, we show that dynamical systems possess an intrinsic state variable that encodes the system behavior in a bijective and causality-free manner, and control design can be carried out entirely within the state space. This approach not only resolves the aforementioned conflict but also complements machine learning techniques well, leading to a neural network architecture that is capable of learning the behavior representation well-suited for control design.

During the first superior conjunction of the Tianwen-1 Mars probe in October 2021, its downlink signal received by the Wuqing 70-m radio telescope passed within 4.53 solar radii of the Sun. The signal was significantly perturbed by the solar wind, providing a mechanism to probe coronal activity. We analyze the Doppler frequency scintillation spectrum of the solar wind within 10 solar radii to derive a characteristic frequency scintillation parameter. Statistical analysis indicates this parameter increases as the signal path approaches the Sun, with notable anomalies observed on October 5, 13, and 15. Comparisons with SOHO and SDO data reveal strong spatio-temporal correlations between these scintillation anomalies and coronal activity. We demonstrate that this parameter effectively identifies solar phenomena, including coronal streamers, high-speed solar wind, and coronal mass ejections (CMEs). Quantitative analysis confirms a distinct temporal correlation and delay between frequency scintillation and solar wind speed changes, validating the feasibility of spatially localizing solar activity.

Solving optimal control problems to determine a stabilizing controller involves a significant computational effort. Time-varying optimal control provides a remedy by designing a tracking system, given as an ordinary differential equation, to track the solution of the optimal control problem. To improve the applicability of the method, measurement errors are considered in this paper and it is described how these errors influence a control Lyapunov function-based decay condition. As a result of these investigations, input-affine constraints that meet the standard formulation and that describe the set of admissible controls are obtained. The paper also derives a requirement on the necessary measurement accuracy as well as a triggering condition for taking a new measurement. The main theorem combines these results into a robustly stabilizing control algorithm, meaning that all closed-loop trajectories starting in a vicinity around the true state converge to zero. Additionally, the tracking system ensures that the optimal control is tracked at the end of each sampling period. The effectiveness of this approach is demonstrated using a train acceleration model and the well-known predator-prey model.

We address the problem of interaction topology identification in open multi-agent systems (OMAS) with dynamic node sets and fast switching interactions. In such systems, new agents join and interactions change rapidly, resulting in intervals with short dwell time and rendering conventional segment-wise estimation and clustering methods unreliable. To overcome this, we propose a projection-based dissimilarity measure derived from a consistency property of local least-squares operators, enabling robust mode clustering. Aggregating intervals within each cluster yields accurate topology estimates. The proposed framework offers a systematic solution for reconstructing the interaction topology of OMAS subject to fast switching. Finally, we illustrate our theoretical results via numerical simulations.

This paper proposes an improved approach for open-set speaker identification based on pretrained speaker foundation models. Building upon the previous Speaker Reciprocal Points Learning framework (V1), we first introduce an enhanced open-set learning objective by integrating reciprocal points learning with logit normalization (LogitNorm) and incorporating adaptive anchor learning to better constrain target speaker representations and improve robustness. Second, we propose a model fusion strategy to stabilize and enhance the few-shot tuning process, effectively reducing result randomness and improving generalization. Furthermore, we introduce a model selection method to ensure optimal performance in model fusion. Experimental evaluations on the VoxCeleb, ESD and 3D-Speaker datasets demonstrate the effectiveness and robustness of the proposed method under diverse conditions. On a newly proposed Vox1-O-like test set, our method reduces the EER from 1.28% to 0.09%, achieving a relative reduction of approximately 93%.

Electricity is typically traded in day-ahead auctions because many power system decisions, such as unit commitment, must be made in advance. However, when wind and solar generators sell power one day ahead, they face uncertainty about their actual production. In current day-ahead auctions, this uncertainty cannot be directly communicated, leading to inefficient use of renewable energy and suboptimal system decisions. We show how this problem can be addressed using the concept of equilibrium under uncertainty from microeconomic theory. In particular, we demonstrate that electricity contracts should be conditioned not only on the time and location of delivery, but also on the state of the world (e.g., whether it will be windy or calm). This requires a precise definition of the state of the world. Since there are infinitely many possible definitions, criteria are needed to select among them. We develop such criteria and show that the resulting states correspond to solutions of an optimal partitioning problem. Finally, we illustrate how these states can be computed and interpreted using a case study of offshore wind farms in the European North Sea.

High-precision direction-of-arrival (DOA) estimation, as a key sensing capability for 6G-enabled applications such as autonomous driving and extended reality, is increasingly dependent on the effective exploitation of spatial degrees of freedom (DOFs). This paper integrates two frontier DOFs-oriented paradigms and proposes a fluid antenna-enabled hybrid analog-digital (FA-HAD) architecture, which features an extremely lightweight front-end configuration mechanism and efficient spatial DOFs exploitation. Within this architecture, a collaborative spatial-phase sampling strategy is first developed to enable real-time 2-D DOA estimation under compressive observations, and a single-source CRLB analysis is provided to quantify the achievable performance limit, offering quantitative guidance for accuracy-overhead trade-offs. Furthermore, an efficient virtual-array spatial covariance matrix reconstruction method is proposed to recover a physically meaningful covariance representation, thereby providing a covariance-domain interface that is directly reusable by a broad class of existing covariance-based array processing and array design techniques, which strengthens the scalability and transferability of the proposed architecture. Building upon the reconstructed SCM, a Jacobi-Anger expansion based dimension-reduced MUSIC estimator is further derived for arbitrary planar arrays with a favorable computational cost. Simulation results demonstrate that the proposed FA-HAD framework attains DOA accuracy close to fully digital systems while substantially reducing RF hardware complexity and training overhead.

Beyond-diagonal reconfigurable intelligent surfaces (BD-RISs), originally in the passive form, have attracted attention due to their benefits in enhanced wave manipulating through flexible inter-element connections and element arrangements. To mitigate the severe multiplicative fading, the concept of active BD-RISs with signal amplification capability has recently been proposed. Inspired by this, we investigate the hybrid transmitting and reflecting mode of active BD-RISs to achieve full-space coverage. We start by deriving a physics compliant communication model applying active BD-RIS with hybrid mode. We further propose novel architectures including reciprocal and non-reciprocal implementations with cell-wise single, group, and fully connections. We also develop a unified optimization framework for the joint transmit precoding and hybrid mode active BD-RIS design to maximize the sum rate of multi-user communication systems, which is applicable to all considered architectures. Numerical results demonstrate that, under the same total power budget, the proposed active BD-RIS with hybrid mode substantially outperforms active and passive simultaneous transmitting and reflecting RISs as well as passive BD-RISs with hybrid mode. This shows the synergy gain from inter-element connection, element arrangements, and active amplification.

The increasing deployment of agentic artificial intelligence (AI) systems has intensified the demand for efficient agent to agent communication, particularly over bandwidth limited wireless links. In embodied AI applications, agents must exchange task related information under strict latency and reliability constraints. Existing agent communication methods primarily focus on connectivity and protocol efficiency, but lack effective mechanisms to reduce physical layer transmission overhead while preserving task semantics.To address this challenge, this paper proposes a semantic agent communication framework that reduces communication overhead while maintaining task performance and shared understanding among agents. An LLM based semantic processor is first introduced to reorganize and condense agent generated messages by extracting task relevant semantic content. To cope with information loss introduced by aggressive message reduction, an importance-aware semantic transmission strategy is developed, which adaptively protects semantic components according to their task importance. Furthermore, a task specific knowledge base is incorporated as long term semantic memory to support recurring tasks and further reduce bandwidth consumption with minimal performance degradation. Experimental results and ablation studies demonstrate that the proposed framework achieves nearly 50% bandwidth reduction with negligible loss in task completion performance compared to conventional transmission schemes.

In this paper, we introduce GatherMOS, a novel framework that leverages large language models (LLM) as meta-evaluators to aggregate diverse signals into quality predictions. GatherMOS integrates lightweight acoustic descriptors with pseudo-labels from DNSMOS and VQScore, enabling the LLM to reason over heterogeneous inputs and infer perceptual mean opinion scores (MOS). We further explore both zero-shot and few-shot in-context learning setups, showing that zero-shot GatherMOS maintains stable performance across diverse conditions, while few-shot guidance yields large gains when support samples match the test conditions. Experiments on the VoiceBank-DEMAND dataset demonstrate that GatherMOS consistently outperforms DNSMOS, VQScore, naive score averaging, and even learning-based models such as CNN-BLSTM and MOS-SSL when trained under limited labeled-data conditions. These results highlight the potential of LLM-based aggregation as a practical strategy for non-intrusive speech quality evaluation.

Even when providing long-run, worst-case guarantees to competing flows of unit-sized tasks, a slot-timed, constant-capacity server's scheduler may retain significant, short-run, scheduling flexibility. Existing worst-case scheduling frameworks offer only limited opportunities to characterize and exploit this flexibility. We introduce a state-based framework that overcomes these limitations. Each flow's guarantee is modeled as a worst-case service that can be updated as tasks arrive and are served. Taking all flows' worst-case services as a collective state, a state-based scheduler ensures, from slot to slot, transitions between schedulable states. This constrains its scheduling flexibility to a polytope consisting of all feasible schedules that preserve schedulability. We fully characterize this polytope, enabling scheduling flexibility to be fully exploited. But, as our framework is general, full exploitation is computationally complex. To reduce complexity, we show: that when feasible schedules exist, at least one can be efficiently identified by simply maximizing the server's capacity slack; that a special class of worst-case services, min-plus services, can be efficiently specified and updated using the min-plus algebra; and that efficiency can be further improved by restricting attention to a min-plus service subclass, dual-curve services. This last specialization turns out to be a dynamic extension of service curves that approaches near practical viability while maintaining all features essential to our framework.

This work presents a cascaded hybrid control framework for quadrotor trajectory tracking under nonlinear dynamics and external disturbances. In quadrotor systems, the altitude and attitude channels exhibit fast, structured dynamics that are well suited to reliable regulation, whereas horizontal-position control is more strongly affected by coupling effects, uncertainty, and disturbances, so that neither pure feedback control nor purely learning-based control alone is equally well suited to all channels. Accordingly, the proposed framework augments conventional proportional-integral-derivative (PID) stabilization for altitude and attitude control with an enhanced Twin Delayed Deep Deterministic Policy Gradient (TD3) agent incorporating a multi-Q-network structure, thereby improving horizontal-position control under severe disturbances. To further strengthen disturbance rejection in altitude and attitude control, a hybrid disturbance observer (HDOB) using low-pass and exponential moving average filtering is embedded in the control loops. The proposed TD3 enhancements are verified through ablation studies, and both numerical simulations and real-world flight tests on the quadrotor platform demonstrate that the proposed method achieves more accurate and robust trajectory tracking under wind disturbances than baseline approaches.

Frequency-based loss reweighting, the standard remedy for imbalanced histopathology segmentation, implicitly assumes that rare classes are difficult. Yet difficulty also arises from morphological variability, boundary ambiguity, and contextual similarity, all largely orthogonal to class frequency. We propose Dynamic Focal Attention (DFA), a simple, efficient mechanism that learns class-specific difficulty directly within the cross-attention of query-based mask decoders. DFA adds a learnable per-class bias to the attention logits, reweighting representations before prediction rather than gradients after it. Initialised from a centred log-frequency prior to prevent gradient starvation and then optimised end-to-end, the bias adapts to difficulty signals as they emerge during training, unifying frequency- and difficulty-aware reweighting in a single attention-bias framework. On three benchmarks (BCSS, BDSA, CRAG), DFA consistently improves Dice and IoU, matching or exceeding a two-stage difficulty-aware baseline without a separate estimator or extra training stage. This shows that encoding difficulty at the representation level is a principled alternative to conventional loss reweighting.

Ultrasonic metal welding (UMW) is widely used in industrial applications but is sensitive to tool wear, surface contamination, and material variability, which can lead to unexpected process faults and unsatisfactory weld quality. Conventional monitoring systems typically rely on supervised learning models that assume all fault types are known in advance, limiting their ability to handle previously unseen process faults. To address this challenge, this paper proposes an adaptive condition monitoring approach that enables unknown fault detection and few-shot continual learning for UMW. Unknown faults are detected by analyzing hidden-layer representations of a multilayer perceptron and leveraging a statistical thresholding strategy. Once detected, the samples from unknown fault types are incorporated into the existing model through a continual learning procedure that selectively updates only the final layers of the network, which enables the model to recognize new fault types while preserving knowledge of existing classes. To accelerate the labeling process, cosine similarity transformation combined with a clustering algorithm groups similar unknown samples, thereby reducing manual labeling effort. Experimental results using a multi-sensor UMW dataset demonstrate that the proposed method achieves 96% accuracy in detecting unseen fault conditions while maintaining reliable classification of known classes. After incorporating a new fault type using only five labeled samples, the updated model achieves 98% testing classification accuracy. These results demonstrate that the proposed approach enables adaptive monitoring with minimal retraining cost and time. The proposed approach provides a scalable solution for continual learning in condition monitoring where new process conditions may constantly emerge over time and is extensible to other manufacturing processes.

Conventional climate control in Controlled Environment Agriculture (CEA) uses independent PID loops for temperature and humidity, creating cross-coupling conflicts that waste 20-40% of HVAC energy. We propose a cascading architecture that elevates Vapor Pressure Deficit (VPD) from a monitored metric to the primary outer-loop control variable. A 7-3-3 neural network optimizer selects energy-minimal temperature-humidity setpoints along the VPD constraint surface, feeding inner PID loops that drive HVAC actuators. Lyapunov stability analysis guarantees bounded PID gains. Deployment across 30+ commercial facilities in 8 U.S. climate zones over 7+ years demonstrates 30-38% HVAC energy reduction, 68-73% improvement in VPD stability, and 60-67% faster disturbance recovery compared to independent PID baselines.

Turbofan engine degradation under sustained operational stress necessitates robust prognostic systems capable of accurately estimating the Remaining Useful Life (RUL) of critical components. Existing deep learning approaches frequently fail to simultaneously capture multi-sensor spatial correlations and long-range temporal dependencies, while standard symmetric loss functions inadequately penalize the safety-critical error of over-estimating residual life. This study proposes a hybrid architecture integrating Twin-Stage One-Dimensional Convolutional Neural Networks (1D-CNN), a Bidirectional Long Short-Term Memory (BiLSTM) network, and a custom Bahdanau Additive Attention mechanism. The model was trained and evaluated on the NASA Commercial Modular Aero-Propulsion System Simulation (C-MAPSS) FD001 sub-dataset employing a zero-leakage preprocessing pipeline, piecewise-linear RUL labeling capped at 130 cycles, and the NASA-specified asymmetric exponential loss function that disproportionately penalizes over-estimation to enforce industrial safety constraints. Experiments on 100 test engines achieved a Root Mean Squared Error (RMSE) of 17.52 cycles and a NASA S-Score of 922.06. Furthermore, extracted attention weight heatmaps provide interpretable, per-engine insights into the temporal progression of degradation, supporting informed maintenance decision-making. The proposed framework demonstrates competitive performance against established baselines and offers a principled approach to safe, interpretable prognostics in industrial settings.

Accurate Global Horizontal Irradiance (GHI) forecasting is critical for grid stability, particularly in arid regions characterized by rapid aerosol fluctuations. While recent trends favor computationally expensive Transformer-based architectures, this paper challenges the prevailing "complexity-first" paradigm. We propose a lightweight, Physics-Informed Hybrid CNN-BiLSTM framework that prioritizes domain knowledge over architectural depth. The model integrates a Convolutional Neural Network (CNN) for spatial feature extraction with a Bi-Directional LSTM for capturing temporal dependencies. Unlike standard data-driven approaches, our model is explicitly guided by a vector of 15 engineered features including Clear-Sky indices and Solar Zenith Angle - rather than relying solely on raw historical data. Hyperparameters are rigorously tuned using Bayesian Optimization to ensure global optimality. Experimental validation using NASA POWER data in Sudan demonstrates that our physics-guided approach achieves a Root Mean Square Error (RMSE) of 19.53 W/m^2, significantly outperforming complex attention-based baselines (RMSE 30.64 W/m^2). These results confirm a "Complexity Paradox": in high-noise meteorological tasks, explicit physical constraints offer a more efficient and accurate alternative to self-attention mechanisms. The findings advocate for a shift towards hybrid, physics-aware AI for real-time renewable energy management.

The rapid development of cyber-physical systems is driving a transition toward mixed traffic environments comprising both human-driven and connected and automated vehicles (CAVs). This shift presents a unique opportunity to leverage the efficient operation of CAVs to improve overall network throughput. This paper introduces a hierarchical framework designed to bridge macroscopic routing optimization at the network level with microscopic vicinity control at signalized intersections. The upper layer utilizes aggregated traffic information to provide proactive routing guidance for CAVs, aiming to minimize total travel time. The lower layer leverages local vehicle states to jointly optimize traffic light phases and individual CAV trajectories, aiming to reduce intersection crossing delays and optimize energy consumption, respectively. The effectiveness of the proposed framework is validated through SUMO on the Sioux Falls benchmark network. Results demonstrate that the integration of these macroscopic and microscopic layers yields significantly better performance compared to applying either layer in isolation, significantly improving network throughput and reducing congestion.