Papers

Incidental findings in CT scans, though often benign, can have significant clinical implications and should be reported following established guidelines. Traditional manual inspection by radiologists is time-consuming and variable. This paper proposes a novel framework that leverages large language models (LLMs) and foundational vision-language models (VLMs) in a plan-and-execute agentic approach to improve the efficiency and precision of incidental findings detection, classification, and reporting for abdominal CT scans. Given medical guidelines for abdominal organs, the process of managing incidental findings is automated through a planner-executor framework. The planner, based on LLM, generates Python scripts using predefined base functions, while the executor runs these scripts to perform the necessary checks and detections, via VLMs, segmentation models, and image processing subroutines. We demonstrate the effectiveness of our approach through experiments on a CT abdominal benchmark for three organs, in a fully automatic end-to-end manner. Our results show that the proposed framework outperforms existing pure VLM-based approaches in terms of accuracy and efficiency.

We propose a low-complexity localization framework for uplink distributed MIMO (D-MIMO) systems, targeting the challenge of minimizing the highly spiky maximum-likelihood (ML) cost function that arises in sparsely deployed phasecoherent access points (APs) with narrowband transmission. In such systems, ML-based localization typically relies on dense grid search, incurring prohibitive computational complexity. To address this, we introduce phase-only localization (POLO), an approach that leverages differential carrier-phase measurements from selected APs to generate a compact set of candidate user positions. The ML cost function is then evaluated only at these candidates, reducing complexity significantly. A key challenge is to devise an AP selection mechanism that reduces the number of candidate points while maintaining reliable coverage. We propose two variants: POLO-I, which selects three APs to provide closed-form candidate positions with low computational cost, and POLO-II, which selects four APs using an alternative strategy that enhances coverage at marginally higher runtime. Comprehensive analytical and simulation results show that POLO achieves a favorable coverage-complexity trade-off, reducing cost by orders of magnitude relative to exhaustive grid search with only marginal loss in coverage. By characterizing this tradeoff under diverse AP configurations, we also provide practical guidelines for selecting between POLO-I and POLO-II depending on latency and coverage requirements.

Spatially inhomogeneous magnetic fields offer a valuable, non-visual information source for positioning. Among systems leveraging this, magnetic field-based simultaneous localization and mapping (SLAM) systems are particularly attractive. These systems execute positioning and magnetic field mapping tasks simultaneously, and they have bounded positioning error within previously visited regions. However, state-of-the-art magnetic-field SLAM methods typically require low-drift odometry data provided by visual odometry, a wheel encoder, or pedestrian dead-reckoning technology, which may not be available under certain situations. To address this limitation, this work proposes two magnetic inertial SLAM (MI-SLAM) systems — a loosely coupled version and a tightly coupled version — that rely solely on low-cost sensors: an inertial measurement unit (IMU) and seven magnetometers. Both systems use a magnetic field aided inertial navigation system (MAINS) to obtain odometry. The key difference between the two systems is whether the navigation state estimation is done in one or two steps. These systems are evaluated in real-world indoor environments with multi-floor structures. The proposed MI-SLAM systems outperform the state-of-the-art magnetic-inertial odometry system, MAINS, achieving a positioning RMSE below 1 meter on a trajectory lasting approximately 200 seconds. A potential application of the proposed systems is for the positioning of emergency response officers in mine or fire rescue operations, where one cannot rely on a GNSS or visual-based localization system.

This paper studies the efficient implementation of safety filters that are designed using control barrier functions (CBFs), which minimally modify a nominal controller to render it safe with respect to a prescribed set of states. Although CBF-based safety filters are often implemented by solving a quadratic program (QP) in real time, the use of off-the-shelf solvers for such optimization problems poses a challenge in applications where control actions need to be computed efficiently at very high frequencies. In this paper, we introduce a closed-form expression for controllers obtained through CBF-based safety filters. This expression is obtained by partitioning the state-space into different regions, with a different closed-form solution in each region. We leverage this formula to introduce a resource-aware implementation of CBF-based safety filters that detects changes in the partition region and uses the closed-form expression between changes. We showcase the applicability of our approach in examples ranging from aerospace control to safe reinforcement learning.

Learning the flows of hybrid systems that have both continuous and discrete time dynamics is challenging. The existing method learns the dynamics in each discrete mode, which suffers from the combination of mode switching and discontinuities in the flows. In this work, we propose CHyLL (Continuous Hybrid System Learning in Latent Space), which learns a continuous neural representation of a hybrid system without trajectory segmentation, event functions, or mode switching. The key insight of CHyLL is that the reset map glues the state space at the guard surface, reformulating the state space as a piecewise smooth quotient manifold where the flow becomes spatially continuous. Building upon these insights and the embedding theorems grounded in differential topology, CHyLL concurrently learns a singularity-free neural embedding in a higher-dimensional space and the continuous flow in it. We showcase that CHyLL can accurately predict the flow of hybrid systems with superior accuracy and identify the topological invariants of the hybrid systems. Finally, we apply CHyLL to the stochastic optimal control problem.

Real-time location systems (RTLSs) are central to Industry 4.0 and emerging Industry 5.0, providing the spatiotemporal data required for asset tracking, workflow optimization, safety, and integration with WMS, MES, and digital twins. While large enterprises increasingly deploy RTLSs, adoption among small and medium-sized enterprises (SMEs) remains limited. This paper examines whether cost and installation complexity are primary barriers to SME adoption. We position RTLSs within the broader Industry 4.0 and Logistics 4.0 landscape and summarize their operational value. We then synthesize evidence from the literature on technical, financial, and organizational constraints, with emphasis on infrastructure requirements, calibration effort, integration with legacy systems, and human factors. To complement this analysis, we report results from an online survey of sixteen manufacturing and technology professionals in Canada and the United States. Respondents report strong perceived value for real-time tracking but identify upfront cost, installation effort, integration difficulty, and reliance on multiple anchor nodes as dominant obstacles. Most indicate acceptable upfront investments below $10,000 and express a clear preference for low-infrastructure deployments with minimized anchor counts. Building on these findings, we outline design directions for SME-focused RTLSs, including wireless and modular architectures, cloud-managed and self-calibrating systems, standardized integration interfaces, and anchor-minimizing or anchor-free localization methods. Overall, the results show that limited SME adoption stems less from insufficient perceived value than from misalignment between current RTLS deployment models and SME resource constraints.

Time series forecasting requires models that can efficiently capture complex temporal dependencies, especially in large-scale and high-dimensional settings. While Transformer-based architectures excel at modeling long-range dependencies, their quadratic computational complexity poses limitations on scalability and adaptability. To overcome these challenges, we introduce DB2-TransF, a novel Transformer-inspired architecture that replaces the self-attention mechanism with a learnable Daubechies wavelet coefficient layer. This wavelet-based module efficiently captures multi-scale local and global patterns and enhances the modeling of correlations across multiple time series for the time series forecasting task. Extensive experiments on 13 standard forecasting benchmarks demonstrate that DB2-TransF achieves comparable or superior predictive accuracy to conventional Transformers, while substantially reducing memory usage for the time series forecasting task. The obtained experimental results position DB2-TransF as a scalable and resource-efficient framework for advanced time series forecasting. Our code is available at https://github.com/SteadySurfdom/DB2-TransF

Affine frequency division multiplexing (AFDM) is a promising waveform for future wireless communication systems. In this paper, we analyze the impact of receiver in-phase and quadrature (IQ) imbalance and residual carrier frequency offset (CFO) error on AFDM signals. Our analysis shows that the receiver IQ imbalance may not preserve the sparsity of the AFDM effective channel matrix because of the complex-conjugate operator of the discrete affine Fourier transform (DAFT). Moreover, the residual CFO error causes energy leakage in the effective channel matrix in the affine domain. To mitigate these effects, we extend the linear minimum mean-square error (LMMSE) detector to handle the improper Gaussian noise arising from the receiver IQ imbalance. Simulation results demonstrate that the proposed LMMSE detector effectively compensates for the receiver hardware impairments.

A new fuzzy optimization framework that extends FCM causality is proposed. This model utilizes the dynamics to map data into metrics and create a framework that examines logical implication and hierarchy of concepts using a multiplex. Moreover, this is a white-theoretical paper introducing the framework and analyzing the logic and math behind it. Upon this extension the main objectives and the orientation of this framework is expounded and exemplified; this framework is meant for service optimization of information transmission in service process design. Lastly, a thorough analysis of the FHM is included which is done following the logical steps in a simple and elegant manner.

We discuss the prospect of using cascaded phase modulators and dispersive elements to achieve arbitrary optical waveform generation. This transform is not limited by the bandwidth of its constituent modulators and is theoretically lossless.

Backpressure (BP) routing and scheduling is an established resource allocation method for wireless multi-hop networks, noted for its fully distributed operation and maximum queue stability. Recent advances in shortest path-biased BP routing (SP-BP) mitigate shortcomings such as slow startup and random walks, yet exclusive link-level commodity selection still causes last-packet problem and bandwidth underutilization. By revisiting the Lyapunov drift theory underlying BP, we show that the legacy exclusive commodity selection is unnecessary, and propose a Maximum Utility (MaxU) link-sharing method to expand its performance envelope without increasing control message overhead. Numerical results show that MaxU SP-BP substantially mitigates the last-packet problem and slightly expands the network capacity region.

The integration of Unmanned Aerial Vehicles (UAVs) and Unmanned Ground Vehicles (UGVs) is increasingly central to the development of intelligent autonomous systems for applications such as search and rescue, environmental monitoring, and logistics. However, precise coordination between these platforms in real-time scenarios presents major challenges, particularly when external localization infrastructure such as GPS or GNSS is unavailable or degraded [1]. This paper proposes a vision-based, data-driven framework for real-time UAV-UGV integration, with a focus on robust UGV detection and heading angle prediction for navigation and coordination. The system employs a fine-tuned YOLOv5 model to detect UGVs and extract bounding box features, which are then used by a lightweight artificial neural network (ANN) to estimate the UAV's required heading angle. A VICON motion capture system was used to generate ground-truth data during training, resulting in a dataset of over 13,000 annotated images collected in a controlled lab environment. The trained ANN achieves a mean absolute error of 0.1506{\deg} and a root mean squared error of 0.1957{\deg}, offering accurate heading angle predictions using only monocular camera inputs. Experimental evaluations achieve 95% accuracy in UGV detection. This work contributes a vision-based, infrastructure- independent solution that demonstrates strong potential for deployment in GPS/GNSS-denied environments, supporting reliable multi-agent coordination under realistic dynamic conditions. A demonstration video showcasing the system's real-time performance, including UGV detection, heading angle prediction, and UAV alignment under dynamic conditions, is available at: https://github.com/Kooroshraf/UAV-UGV-Integration

Deep learning (DL) has recently emerged as an efficient approach for array processing tasks such as signal detection and direction of arrival. However, DL models lack statistical guarantees and, moreover, are highly susceptible to adversarial interference, raising security concerns about their reliability in adversarial wireless environments. In this letter, we first show that second-order statistics of the received array are spatially robust to L-p bounded adversarial perturbations. Then, motivated by this theoretical result, we develop an adversarially resilient speculative array processing framework that consists of a low-latency DL classifier backed by a theoretically-grounded generalized likelihood ratio test (GLRT) validator, which operates on the spatial domain of the array, where DL is used for fast speculative inference and later confirmed with the GLRT. Empirical evaluations under multiple L-p bounds, perturbation designs, and perturbation magnitudes corroborate our proposed framework and theoretical findings, demonstrating the superior performance of our proposed approach in comparison to multiple state-of-the-art baselines.

This paper proposes a reliable learning-based adaptive control framework for nonlinear multi-agent systems (MASs) subject to Denial-of-Service (DoS) attacks and singular control gains, two critical challenges in cyber-physical systems. A neural-variable-structure adaptive controller is developed to achieve leader-follower consensus while ensuring robustness to external disturbances and adaptability to unknown nonlinear dynamics. A reliability-assessment rule is introduced to detect communication loss during DoS attacks, upon which a switched control mechanism is activated to preserve closed-loop stability and performance. Unlike existing resilient MAS control methods, the proposed strategy explicitly accommodates singular control gains and does not rely on restrictive assumptions such as Lipschitz continuity or prior bounds on nonlinearities. To the authors' knowledge, this is the first work to integrate neural learning, variable-structure robustness, and reliability-based switching into a unified consensus-tracking control architecture for heterogeneous nonlinear MASs with singular input gains under DoS attacks. Lyapunov-based analysis establishes uniform ultimate boundedness of all closed-loop signals, and Matlab/Simulink simulations on a connected automated vehicle platoon demonstrate the method's effectiveness and resilience.

This paper presents an energy-efficient transmission framework for federated learning (FL) in industrial Internet of Things (IIoT) environments with strict latency and energy constraints. Machinery subnetworks (SNs) collaboratively train a global model by uploading local updates to an edge server (ES), either directly or via neighboring SNs acting as decode-and-forward relays. To enhance communication efficiency, relays perform partial aggregation before forwarding the models to the ES, significantly reducing overhead and training latency. We analyze the convergence behavior of this relay-assisted FL scheme. To address the inherent energy efficiency (EE) challenges, we decompose the original non-convex optimization problem into sub-problems addressing computation and communication energy separately. An SN grouping algorithm categorizes devices into single-hop and two-hop transmitters based on latency minimization, followed by a relay selection mechanism. To improve FL reliability, we further maximize the number of SNs that meet the roundwise delay constraint, promoting broader participation and improved convergence stability under practical IIoT data distributions. Transmit power levels are then optimized to maximize EE, and a sequential parametric convex approximation (SPCA) method is proposed for joint configuration of system parameters. We further extend the EE formulation to the imperfect channel state information (ICSI). Simulation results demonstrate that the proposed framework significantly enhances convergence speed, reduces outage probability from 10-2 in single-hop to 10-6 and achieves substantial energy savings, with the SPCA approach reducing energy consumption by at least 2x compared to unaggregated cooperation and up to 6x over single-hop transmission.

Integrated Sensing and Communications (ISAC) has garnered significant attention as a promising technology for next-generation wireless and vehicular communications. Among candidate waveforms, Orthogonal Frequency Division Multiplexing (OFDM) has been extensively investigated over the past decade for its robustness against frequency-selective fading and its favorable ranging performance. However, the waveform's sensing and communication (S&C) performance depends strongly on the modulation scheme; while variable-amplitude constellations such as quadrature amplitude (QAM) are more efficient for communication, constant-modulus modulations such as phase shift keying (PSK) are more suitable for sensing. Yet, it remains unclear whether these findings persist under power amplifier (PA) nonlinearity. Because OFDM signals exhibit a high peak-to-average power ratio (PAPR), they require highly linear PAs to avoid distortion, which conflicts with radar requirements, where high transmit power is always beneficial for sensing. In this work, we analyze the effect of PA-induced distortions on the sensing task for PSK and QAM constellations. By introducing the Signal-to-Distortion Ratio (SDR), we examine the extent of the distortion limitation on the ranging task. We complement simulation results with a theoretical characterization of the ambiguity function (AF), thereby explicitly demonstrating how distortion artifacts manifest in the zero-Doppler sidelobes (i.e, ranging sidelobes) and the zero-delay sidelobes. Simulations show that PA distortions impose a palpable performance ceiling for both constellations, reshape the AF, and reduce detection probability, diminishing the theoretical advantage of unimodular signaling and further compromising the OFDM sensing performance with non-uniform envelope signals.

Examples of embedded intelligence include a wide variety of tiny neural networks used on-board wireless sensors and actuators, which are expected to continuously perform inference on time-series of the data they sense. In order to fit lifetime and energy consumption requirements when operating on battery, such hardware is exclusively based on microcontroller with as little memory as possible, e.g., 128 kB of RAM. In this context, optimizing data flows during inference across neural network layers becomes crucial. In this paper, we introduce a new framework, TinyDéjàVu, and novel algorithms we designed to drastically reduce the RAM budget required by inference using various neural network models for sensor data time-series on typical microcontroller hardware. We publish the implementation of TinyDéjàVu as open source, and we perform reproducible benchmarks on common microcontroller hardware (Arm Cortex-M). We show that TinyDéjàVu can save up to 90% of RAM usage with equal compute latency compared to prior work (StreamiNNC) on overlapping sliding window inputs.

Few-shot learning (FSL) mitigates data scarcity in cardiac MRI segmentation but typically relies on semi-supervised techniques sensitive to domain shifts and validation bias, restricting zero-shot generalizability. We propose PathCo-LatticE, a fully supervised FSL framework that replaces unlabeled data with pathology-guided synthetic supervision. First, our Virtual Patient Engine models continuous latent disease trajectories from sparse clinical anchors, using generative modeling to synthesize physiologically plausible, fully labeled 3D cohorts. Second, Self-Reinforcing Interleaved Validation (SIV) provides a leakage-free protocol that evaluates models online with progressively challenging synthetic samples, eliminating the need for real validation data. Finally, a dynamic Lattice-of-Experts (LoE) organizes specialized networks within a pathology-aware topology and activates the most relevant experts per input, enabling robust zero-shot generalization to unseen data without target-domain fine-tuning. We evaluated PathCo-LatticE in a strict out-of-distribution (OOD) setting, deriving all anchors and severity statistics from a single-source domain (ACDC) and performing zero-shot testing on the multi-center, multi-vendor M&Ms dataset. PathCo-LatticE outperforms four state-of-the-art FSL methods by 4.2-11% Dice starting from only 7 labeled anchors, and approaches fully supervised performance (within 1% Dice) with only 19 labeled anchors. The method shows superior harmonization across four vendors and generalization to unseen pathologies. [Code will be made publicly available].

In recent years, unmanned aerial vehicles (UAVs) have become a key role in wireless communication networks due to their flexibility and dynamic adaptability. However, the openness of UAV-based communications leads to security and privacy concerns in wireless transmissions. This paper investigates a framework of UAV covert communications which introduces flexible reconfigurable intelligent surfaces (F-RIS) in UAV networks. Unlike traditional RIS, F-RIS provides advanced deployment flexibility by conforming to curved surfaces and dynamically reconfiguring its electromagnetic properties to enhance the covert communication performance. We establish an electromagnetic model for F-RIS and further develop a fitted model that describes the relationship between F-RIS reflection amplitude, reflection phase, and incident angle. To maximize the covert transmission rate among UAVs while meeting the covert constraint and public transmission constraint, we introduce a strategy of jointly optimizing UAV trajectories, F-RIS reflection vectors, F-RIS incident angles, and non-orthogonal multiple access (NOMA) power allocation. Considering this is a complicated non-convex optimization problem, we propose a deep reinforcement learning (DRL) algorithm-based optimization solution. Simulation results demonstrate that our proposed framework and optimization method significantly outperform traditional benchmarks, and highlight the advantages of F-RIS in enhancing covert communication performance within UAV networks.

Speech Activity Detection (SAD) systems often misclassify singing as speech, leading to degraded performance in applications such as dialogue enhancement and automatic speech recognition. We introduce Singing-Robust Speech Activity Detection ( SR-SAD ), a neural network designed to robustly detect speech in the presence of singing. Our key contributions are: i) a training strategy using controlled ratios of speech and singing samples to improve discrimination, ii) a computationally efficient model that maintains robust performance while reducing inference runtime, and iii) a new evaluation metric tailored to assess SAD robustness in mixed speech-singing scenarios. Experiments on a challenging dataset spanning multiple musical genres show that SR-SAD maintains high speech detection accuracy (AUC = 0.919) while rejecting singing. By explicitly learning to distinguish between speech and singing, SR-SAD enables more reliable SAD in mixed speech-singing scenarios.

General-purpose object detectors face fundamental structural limitations when applied to ship detection in satellite imagery, where the ship scale distribution is concentrated at small sizes and high aspect ratios. In conventional You Only Look Once architectures, the deepest feature pyramid level (stride 32) compresses narrow vessels into sub-pixel representations, causing severe spatial feature dilution and compromising accurate ship boundary regression. We propose Less is More YOLO, a streamlined detector built upon the extra-large variant of YOLOv9, to address these domain-specific structural conflicts. From a statistical analysis of ship scale distributions across four major benchmarks (SODA-A, DOTA-v1.5, FAIR1M-v2.0, and ShipRSImageNet), we introduce a Pyramid Level Shift Strategy that shifts the detection head from strides 8, 16, and 32 to strides 4, 8, and 16. This shift satisfies a spatial representability condition derived from the Nyquist-Shannon principle for the narrowest targets, while eliminating the computational redundancy of the deepest pyramid level. To further stabilize training on high-resolution satellite inputs, we incorporate a group-normalized composite-backbone projection module, mitigating gradient instability in memory-constrained micro-batch regimes. Validated on these four datasets, our detector attains an mAP50:95 of 0.600 with only 21.16 million parameters, a 64.1% reduction from the extra-large YOLOv9 baseline (58.99 million). Despite this compact size, our model surpasses state-of-the-art detectors up to three times larger, validating that a well-targeted pyramid level shift achieves a "Less is More" balance between accuracy and efficiency. The code is available at https://github.com/egshkim/LiM-YOLO.

This work studies the application of Multi-Agent Reinforcement Learning (MARL) to decentralized control of unmanned aerial vehicles to relay a critical data package to a known position. For this purpose, a family of deterministic games is introduced, designed for MARL scaling studies. A robust baseline policy is proposed which restricts agent motion and applies Dijkstra's shortest path algorithm. Computational experiment results show that two off-the-shelf MARL algorithms perform competitively with the baseline for a small number of agents, but face scalability issues as the number of agents increases. Source code and animations are available online at https://github.com/mikapersson/Information-Relaying.

The proliferation of satellite constellations, coupled with reduced tasking latency and diverse sensor capabilities, has expanded the opportunities for automated Earth observation. This paper introduces a fully automated Tip-and-Cue framework designed for satellite imaging tasking and scheduling. In this context, tips are generated from external data sources or analyses of prior satellite imagery, identifying spatiotemporal targets and prioritizing them for downstream planning. Corresponding cues are the imaging tasks formulated in response, which incorporate sensor constraints, timing requirements, and utility functions. The system autonomously generates candidate tasks, optimizes their scheduling across multiple satellites using continuous utility functions that reflect the expected value of each observation, and processes the resulting imagery using artificial-intelligence-based models, including object detectors and vision-language models. Structured visual reports are generated to support both interpretability and the identification of new insights for downstream tasking. The efficacy of the framework is demonstrated through a maritime vessel tracking scenario, utilizing Automatic Identification System (AIS) data for trajectory prediction, targeted observations, and the generation of actionable outputs. Maritime vessel tracking is a widely researched application, often used to benchmark novel approaches to satellite tasking, forecasting, and analysis. The system is extensible to broader applications such as smart-city monitoring and disaster response, where timely tasking and automated analysis are critical.

A control-theoretic framework for autonomous avatar-guided rehabilitation in virtual reality, based on interpretable, adaptive motor guidance through optimal control, is presented. The framework faces critical challenges in motor rehabilitation due to accessibility, cost, and continuity of care, with over 50% of patients inability to attend regular clinic sessions. The system enables post-stroke patients to undergo personalized therapy in immersive virtual reality at home, while being monitored by clinicians. The core is a nonlinear, human-in-the-loop control strategy, where the avatar adapts in real time to the patient's performance. Balance between following the patient's movements and guiding them to ideal kinematic profiles based on the Hogan minimum-jerk model is achieved through multi-objective optimal control. A data-driven "ability index" uses smoothness metrics to dynamically adjust control gains according to the patient's progress. The system was validated through simulations and preliminary trials, and shows potential for delivering adaptive, engaging and scalable remote physiotherapy guided by interpretable control-theoretic principles.

We describe SynthPix, a synthetic image generator for Particle Image Velocimetry (PIV) with a focus on performance and parallelism on accelerators, implemented in JAX. SynthPix produces PIV image pairs from prescribed flow fields while exposing a configuration interface aligned with common PIV imaging and acquisition parameters (e.g., seeding density, particle image size, illumination nonuniformity, noise, blur, and timing). In contrast to offline dataset generation workflows, SynthPix is built to stream images on-the-fly directly into learning and benchmarking pipelines, enabling data-hungry methods and closed-loop procedures – such as adaptive sampling and acquisition/parameter co-design – without prohibitive storage and input-output costs. We demonstrate that SynthPix is compatible with a broad range of application scenarios, including controlled laboratory experiments and riverine image velocimetry, and supports rapid sweeps over nuisance factors for systematic robustness evaluation. SynthPix is a tool that supports the flow quantification community and in this paper we describe the main ideas behind the software package.

The low-altitude economy (LAE) has emerged and developed in various fields, which has gained considerable interest. To ensure the security of LAE, it is essential to establish a proper sensing coverage scheme for monitoring the unauthorized targets. Introducing integrated sensing and communication (ISAC) into cellular networks is a promising solution that enables coordinated multiple base stations (BSs) to significantly enhance sensing performance and extend coverage. Meanwhile, deploying a reconfigurable intelligent surface (RIS) can mitigate signal blockages between BSs and low-altitude targets in urban areas. Therefore, this paper focuses on the low-altitude sensing coverage problem in RIS-assisted coordinated multi-point ISAC networks, where a RIS is employed to enable multiple BSs to sense a prescribed region while serving multiple communication users. A joint beamforming and phase shifts design is proposed to minimize the total transmit power while guaranteeing sensing signal-to-noise ratio and communication spectral efficiency. To tackle this non-convex optimization problem, an efficient algorithm is proposed by using the alternating optimization and semi-definite relaxation techniques. Numerical results demonstrate the superiority of our proposed scheme over the baseline schemes.

Real-time model predictive control of non-smooth switching systems remains challenging due to discontinuities and the presence of discrete modes, which complicate numerical integration and optimization. This paper presents a real-time feasible non-smooth model predictive control scheme for a physical three-tank process, implemented without mixed-integer formulations. The approach combines Filippov system modeling with finite elements and switch detection for time discretization, leading to a finite-dimensional optimal control problem formulated as a mathematical program with complementarity constraints. The mathematical program is solved via a homotopy of smooth nonlinear programs. We introduce modeling adjustments that make the three-tank dynamics numerically tractable, including additional modes to avoid non-Lipschitz points and undefined function values. Hardware experiments demonstrate efficient handling of switching events, mode-consistent tracking across reference changes, correct boundary handling, and constraint satisfaction. Furthermore, we investigate the impact of model mismatch and show that the tracking performance and computation times remain within real-time limits for the chosen sampling time. The complete controller is implemented using the non-smooth optimal control framework NOSNOC

Physical artificial intelligence (AI) refers to the AI that interacts with the physical world in real time. Similar to multisensory perception, Physical AI makes decisions based on multimodal updates from sensors and devices. Physical AI thus operates with a finite spatial footprint of its sensory tributaries. The multimodal updates traverse heterogeneous and unreliable paths, involving wireless links. Throughput or latency guarantees do not ensure correct decision-making, as misaligned, misordered, or stale inputs still yield wrong inferences. Preserving decision-time coherence hinges on three timing primitives at the network-application interface: (i) simultaneity, a short coincidence window that groups measurements as co-temporal, (ii) causality, path-wise delivery that never lets a consequence precede its precursor, and (iii) usefulness, a validity horizon that drops information too stale to influence the current action. In this work, we focus on usefulness and adopt temporal window of integration (TWI)-Causality: the TWI enforces decision-time usefulness by assuming path-wise causal consistency and cross-path simultaneity are handled upstream. We model end-to-end path delay as the sum of sensing/propagation, computation, and access/transmission latencies, and formulate network design as minimizing the validity horizon under a delivery reliability constraint. In effect, this calibrates delay-reliability budgets for a timing-aware system operating over sensors within a finite spatial footprint. The joint choice of horizon and per-path reliability is cast as a convex optimization problem, solved to global optimality to obtain the minimal horizon and per-path allocation of reliability. This is compared favourably to a benchmark based on uniform-after-threshold allocation. Overall, this study contributes to timing-aware Physical AI in next-generation networks.

This letter seeks to clarify the different existing definitions of both instantaneous complex phase and frequency as well as their equivalence under standard modeling assumptions considered for transmission systems, i.e. balanced positive sequence operation, sole presence of electro-mechanical transient dynamics and absence of harmonics and interharmonics. To achieve this, the two fundamental definitions, i.e., those based on either the use of (i) analytic signals or (ii) space vectors, together with the premises used for their formulation, are presented and their relationship shown. Lastly, a unified notation and terminology to avoid confusion is proposed.

The rapid development of low-altitude economy has placed higher demands on the sensing of small-sized unmanned aerial vehicle (UAV) targets. However, the complex and dynamic low-altitude environment, like the urban and mountainous areas, makes clutter a significant factor affecting the sensing performance. Traditional clutter suppression methods based on Doppler difference or signal strength are inadequate for scenarios with dynamic clutter and slow-moving targets like low-altitude UAVs. In this paper, motivated by the concept of channel knowledge map (CKM), we propose a novel clutter suppression technique for orthogonal frequency division multiplexing (OFDM) integrated sensing and communication (ISAC) system, by leveraging a new type of CKM named clutter angle map (CLAM). CLAM is a site-specific database, containing location-specific primary clutter angles for the coverage area of the ISAC base station (BS). With CLAM, the sensing signal components corresponding to the clutter environment can be effectively removed before target detection and parameter estimation, which greatly enhances the sensing performance. Besides, to take into account the scenarios when the targets and clutters are in close directions so that pure CLAM-based spatial domain clutter suppression is no longer effective, we further propose a two-step CLAM-enabled joint spatial-Doppler domain clutter suppression algorithm. Simulation results demonstrate that the proposed technique effectively suppresses clutter and enhances target sensing performance, achieving accurate parameter estimation for sensing slow-moving low-altitude UAV targets.