Papers

To enhance the performance of aerial-ground networks, this paper proposes an integrated sensing and communication (ISAC) framework for multi-UAV systems. In our model, ground base stations (BSs) cooperatively serve multiple unmanned aerial vehicles (UAVs), employing a dynamic time-division strategy where beam scanning for sensing precedes data communication in each time slot. To maximize the sum communication rate while satisfying a mission-level cumulative radar mutual information (MI) requirement, we jointly optimize the UAV trajectories, communication and sensing power allocation, and the time-division ratio. The resulting highly coupled non-convex optimization problem is efficiently solved using an alternating optimization (AO) and successive convex approximation (SCA) framework, which yields a non-decreasing objective sequence and convergence to a finite objective value under the adopted surrogate-based iterative procedure. Extensive simulation results demonstrate that our proposed joint design significantly outperforms benchmark schemes with static trajectories, partially optimized resources, or non-cooperative single-BS transmission. Furthermore, a comprehensive sensitivity analysis reveals the distinct mechanisms by which sensing thresholds and the number of UAVs influence resource allocation and spatial organization, highlighting the critical importance of dynamic, multi-dimensional resource management for effectively navigating the sensing-communication trade-off in low-altitude economies.

Event cameras, by virtue of their working principle, directly encode motion within a scene. Many learning-based and model-based methods exist that estimate event-based optical flow, however the temporally dense yet spatially sparse nature of events poses significant challenges. To address these issues, contrast maximization (CM) is a prominent model-based optimization methodology that estimates the motion trajectories of events within an event volume by optimally warping them. Since its introduction, the CM framework has undergone a series of refinements by the computer vision community. Nonetheless, it remains a highly non-convex optimization problem. In this paper, we introduce a novel biologically-inspired hybrid CM method for event-based optical flow estimation that couples visual and inertial motion cues. Concretely, we propose the use of orientation maps, derived from camera 3D velocities, as priors to guide the CM process. The orientation maps provide directional guidance and constrain the space of estimated motion trajectories. We show that this orientation-guided formulation leads to improved robustness and convergence in event-based optical flow estimation. The evaluation of our approach on the MVSEC, DSEC, and ECD datasets yields superior accuracy scores over the state of the art.

Cryo-electron microscopy (cryo-EM) enables the atomic-resolution visualization of biomolecules; however, modern direct detectors generate data volumes that far exceed the available storage and transfer bandwidth, thereby constraining practical throughput. We introduce cryoSENSE, the computational realization of a hardware-software co-designed framework for compressive cryo-EM sensing and acquisition. We show that cryo-EM images of proteins lie on low-dimensional manifolds that can be independently represented using sparse priors in predefined bases and generative priors captured by a denoising diffusion model. cryoSENSE leverages these low-dimensional manifolds to enable faithful image reconstruction from spatial and Fourier-domain undersampled measurements while preserving downstream structural resolution. In experiments, cryoSENSE increases acquisition throughput by up to 2.5$\times$ while retaining the original 3D resolution, offering controllable trade-offs between the number of masked measurements and the level of downsampling. Sparse priors favor faithful reconstruction from Fourier-domain measurements and moderate compression, whereas generative diffusion priors achieve accurate recovery from pixel-domain measurements and more severe undersampling. Project website: https://cryosense.github.io.

As renewable energy sources become more prevalent, accurately modeling power grid dynamics is becoming increasingly more complex. Concurrently, data acquisition and realtime system state monitoring are becoming more available for control centers. This motivates shifting from model- and Lyapunov-based feedback controller designs toward model-free ones. Reinforcement learning (RL) has emerged as a key tool for designing model-free controllers. Various studies have been carried out to study voltage/frequency control strategies via RL. However, usually a simplified system model is used neglecting detailed dynamics of solar, wind, and composite loads – and damping system-wide oscillations and modeling power flows are all usually ignored. To that end, we pose an optimal feedback control problem for a detailed renewables-heavy power system, defined by a set of nonlinear differential algebraic equations (NDAE). The control problem is solved using a completely model-free design via RL as well as using a model-based approach built upon the Lyapunov stability theory with guarantees. The paper in its essence seeks to explore whether data-driven feedback control should be used in power grids over its model-driven counterpart. Theoretical developments and thorough case studies are presented with an eye on this exploration. Finally, a detailed analysis is provided to delineate the strengths and weaknesses of both approaches for renewables-heavy grids.

In post-disaster space-air-ground integrated networks (SAGINs), terrestrial infrastructure is often impaired, and unmanned aerial vehicles (UAVs) must rapidly restore connectivity for mission-critical ground terminals in cluttered non-line-of-sight (NLoS) urban environments. To enhance coverage, UAVs employ movable antennas (MAs), while reconfigurable intelligent surfaces (RISs) on surviving high-rises redirect signals. The key challenge is communication-limited partial observability, leaving each UAV with a narrow, fast-changing neighborhood view that destabilizes value estimation. Existing multi-agent reinforcement learning (MARL) approaches are inadequate–non-communication methods rely on unavailable global critics, heuristic sharing is brittle and redundant, and learnable protocols (e.g., CommNet, DIAL) lose per-neighbor structure and aggravate non-stationarity under tight bandwidth. To address partial observability, we propose a spatiotemporal A2C where each UAV transmits prior-decision messages with local state, a compact policy fingerprint, and a recurrent belief, encoded per neighbor and concatenated. A spatial discount shapes value targets to emphasize local interactions, while analysis under one-hop-per-slot latency explains stable training with delayed views. Experimental results show our policy outperforms IA2C, ConseNet, FPrint, DIAL, and CommNet–achieving faster convergence, higher asymptotic reward, reduced Temporal-Difference(TD)/advantage errors, and a better communication throughput-energy trade-off.

Brain tumors induce complex structural deformations that obscure the patient' s original neuroanatomy, making it difficult to distinguish tumor-induced changes from inherent anatomical variability. Reconstructing a subject-specific pseudo-healthy brain can provide a critical reference for such analysis, but this task is inherently counterfactual, as paired pre-tumor scans and explicit healthy guidance are unavailable. We propose BrainNormalizer, a diffusion-based framework for subject-specific pseudo-healthy brain MRI reconstruction that enables anatomy-informed reconstruction without requiring paired data or explicit healthy references. The framework learns anatomical priors and edge-based structural conditioning through a two-stage training strategy consisting of inpainting-based diffusion fine-tuning and ControlNet-based edge conditioning. At inference, counterfactual pseudo-healthy reconstruction is achieved through a deliberate misalignment strategy, where tumorous inputs are paired with non-tumorous prompts and mirrored contralateral edge maps. This allows subject-specific anatomical guidance to be constructed from the patient's own anatomy, enabling anatomically consistent pseudo-healthy reconstruction that preserves individual structural characteristics. Experiments on the BraTS2020 dataset demonstrate that BrainNormalizer achieves improved distributional realism, symmetry-based structural consistency, and reduced false positive detection compared to existing methods. These results indicate that the proposed framework provides a principled approach for subject-specific counterfactual reconstruction and supports downstream analysis of tumor-induced deformation.

Deep neural networks achieve state of the art performance but remain difficult to interpret mechanistically. In this work, we propose a control theoretic framework that treats a trained neural network as a nonlinear state space system and uses local linearization, controllability and observability Gramians, and Hankel singular values to analyze its internal computation. For a given input, we linearize the network around the corresponding hidden activation pattern and construct a state space model whose state consists of hidden neuron activations. The input state and state output Jacobians define local controllability and observability Gramians, from which we compute Hankel singular values and associated modes. These quantities provide a principled notion of neuron and pathway importance: controllability measures how easily each neuron can be excited by input perturbations, observability measures how strongly each neuron influences the output, and Hankel singular values rank internal modes that carry input output energy. We illustrate the framework on simple feedforward networks, including a 1 2 2 1 SwiGLU network and a 2 3 3 2 GELU network. By comparing different operating points, we show how activation saturation reduces controllability, shrinks the dominant Hankel singular value, and shifts the dominant internal mode to a different subset of neurons. The proposed method turns a neural network into a collection of local white box dynamical models and suggests which internal directions are natural candidates for pruning or constraints to improve interpretability.

Traffic signal control algorithms are vulnerable to distribution shift, where performance degrades under traffic conditions that differ from those seen during design or training. This paper introduces a principled approach to quantify distribution shift by representing traffic scenarios as demand histograms and comparing them with a GEH-based distance function. The method is policy-independent, interpretable, and leverages a widely used traffic engineering statistic. We validate the approach on 20 simulated scenarios using both a NEMA actuated controller and a reinforcement learning controller (FRAP++). Results show that larger scenario distances consistently correspond to increased travel time and reduced throughput, with particularly strong explanatory power for learning-based control. Overall, this method can predict performance degradation under distribution shift better than previously published techniques. These findings highlight the utility of the proposed framework for benchmarking, training regime design, and monitoring in adaptive traffic signal control.

Mobile devices increasingly require the parallel execution of several computing tasks offloaded at the wireless edge. Existing communication systems only support parallel transmissions at the bit level, which fundamentally limits the number of tasks that can be concurrently processed. To address this bottleneck, this paper introduces the new concept of Semantic Multiplexing. Our approach shifts stream multiplexing from bits to tasks by merging multiple task-related compressed representations into a single semantic representation. As such, Semantic Multiplexing can multiplex more tasks than the number of physical channels without adding antennas or widening bandwidth by extending the effective degrees of freedom at the semantic layer, without contradicting Shannon capacity rules. We have prototyped Semantic Multiplexing on an experimental testbed with Jetson Orin Nano and millimeter-wave software-defined radios and tested its performance on image classification and sentiment analysis while comparing to several existing baselines in semantic communications. Our experiments demonstrate that Semantic Multiplexing allows jointly processing multiple tasks at the semantic level while maintaining sufficient task accuracy. For example, image classification accuracy drops by less than 4% when increasing from 2 to 8 the number of tasks multiplexed over a 4$\times$4 channel. Semantic Multiplexing reduces latency, energy consumption, and communication load respectively by up to 8$\times$, 25$\times$, and 54$\times$ compared to the baselines while keeping comparable performance. We pledge to publicly share the complete software codebase and the collected datasets for reproducibility.

This paper analyzes internal stability of a discrete-time feedback system with a ReLU nonlinearity. This feedback system is motivated by recurrent neural networks. We first review existing static quadratic constraints (QCs) for slope-restricted nonlinearities. Next, we derive hard integral quadratic constraints (IQCs) for scalar ReLU by using finite impulse filters and structured matrices. These IQCs are combined with a dissipation inequality leading to an LMI condition that certifies internal stability. We show that our new dynamic IQCs for ReLU are a superset of the well-known Zames-Falb IQCs specified for slope-restricted nonlinearities. Numerical results show that the proposed hard IQCs give less conservative stability margins than Zames-Falb multipliers and prior static QC methods, sometimes dramatically so.

Camouflaged object detection is an emerging and challenging computer vision task that requires identifying and segmenting objects that blend seamlessly into their environments due to high similarity in color, texture, and size. This task is further complicated by low-light conditions, partial occlusion, small object size, intricate background patterns, and multiple objects. While many sophisticated methods have been proposed for this task, current methods still struggle to precisely detect camouflaged objects in complex scenarios, especially with small and multiple objects, indicating room for improvement. We propose a Multi-Scale Recursive Network that extracts multi-scale features using a Pyramid Vision Transformer backbone and combines them with specialized Attention-Based Scale Integration Units, thereby enabling selective feature merging. For more precise object detection, our decoder recursively refines features by incorporating Multi-Granularity Fusion Units. A novel recursive-feedback decoding strategy is developed to enhance the model's understanding of global context, thereby helping it overcome the challenges of this task. By jointly leveraging multi-scale learning and recursive feature optimization, our proposed method achieves performance gains, successfully detecting small and multiple camouflaged objects. Our model achieves state-of-the-art results on two benchmark datasets for camouflaged object detection and ranks second on the remaining two. Our code, model weights, and results are available at https://github.com/linaagh98/MSRNet.

Boundedness is an important property of many physical systems. This includes incompressible fluid flows, which are often modeled by quadratic dynamics with an energy-preserving nonlinearity. For such systems, Schlegel and Noack proposed a sufficient condition for boundedness utilizing quadratic Lyapunov functions. They also propose a necessary condition for boundedness aiming to provide a more complete characterization of boundedness in this class of models. The sufficient condition is based on Lyapunov theory and is true. Our paper focuses on this necessary condition. We use an independent proof to show that the condition is true for two dimensional systems. However, we provide a three dimensional counterexample to illustrate that the necessary condition fails to hold in higher dimensions. Our results highlight a theoretical gap in boundedness analysis and suggest future directions to address the conservatism.

This paper addresses the fundamental problem of non-uniform area coverage in multi-agent systems, where different regions require varying levels of attention due to mission-dependent priorities. Existing uniform coverage strategies are insufficient for realistic applications, and many non-uniform approaches either lack optimality guarantees or fail to incorporate crucial real-world constraints such as agent dynamics, limited operation time, the number of agents, and decentralized execution. To resolve these limitations, we propose a novel framework called Density-Driven Optimal Control (D2OC). The central idea of D2OC is the integration of optimal transport theory with multi-agent coverage control, enabling each agent to continuously adjust its trajectory to match a mission-specific reference density map. The proposed formulation establishes optimality by solving a constrained optimization problem that explicitly incorporates physical and operational constraints. The resulting control input is analytically derived from the Lagrangian of the objective function, yielding closed-form optimal solutions for linear systems and a generalizable structure for nonlinear systems. Furthermore, a decentralized data-sharing mechanism is developed to coordinate agents without reliance on global information. Comprehensive simulation studies demonstrate that D2OC achieves significantly improved non-uniform area coverage performance compared to existing methods, while maintaining scalability and decentralized implementability.

Recent studies suggest that uniform circular arrays (UCAs) can extend the angular coverage of the radiative near field region. This work investigates whether such enhanced angular coverage translates into improved spatial multiplexing performance when compared to uniform linear arrays (ULAs). To more accurately delineate the effective near field region, we introduce the effective beamfocusing Rayleigh distance (EBRD), an angle dependent metric that bounds the spatial region where beamfocusing remains effective. Closed form expressions for both beamdepth and EBRD are derived for UCAs. Our analysis shows that, under a fixed antenna element count, ULAs achieve narrower beamdepth and a longer EBRD than UCAs. Conversely, under a fixed aperture length, UCAs provide slightly narrower beamdepth and a marginally longer EBRD. Simulation results further confirm that ULAs achieve higher sum rate under the fixed element constraint, while UCAs offer marginal performance gain under the fixed aperture constraint.

Near-field beamforming enables target discrimination in both range (axial) and angle (lateral) dimensions. Elevated sidelobes along either dimension, however, increase susceptibility to interference and degrade detection performance. Conventional amplitude tapering techniques, designed for far-field scenarios, cannot simultaneously suppress axial and lateral sidelobes in near-field. In this letter, we propose a Slepian-based amplitude tapering approach that maximizes mainlobe energy concentration, achieving significant sidelobe reduction in both dimensions. Numerical results show that the proposed taper improves peak sidelobe suppression by approximately 24 dB in the lateral domain and 10 dB in the axial domain compared to a conventional uniform window.

Ensuring proper generalization is a critical challenge in applying data-driven methods for solving inverse problems in imaging, as neural networks reconstructing an image must perform well across varied datasets and acquisition geometries. In X-ray Computed Tomography (CT), convolutional neural networks (CNNs) are widely used to filter the projection data but are ill-suited for this task as they apply grid-based convolutions to the sinogram, which inherently lies on a line manifold, not a regular grid. The CNNs, unaware of the geometry, are implicitly tied to it and require an excessive amount of parameters as they must infer the relations between measurements from the data rather than from prior information. The contribution of this paper is twofold. First, we introduce a graph data structure to represent CT acquisition geometries and tomographic data, providing a detailed explanation of the graph's structure for circular, cone-beam geometries. Second, we propose GLM, a hybrid neural network architecture that leverages both graph and grid convolutions to process tomographic data. We demonstrate that GLM outperforms CNNs when performance is quantified in terms of structural similarity and peak signal-to-noise ratio, despite the fact that GLM uses only a fraction of the trainable parameters. Compared to CNNs, GLM also requires significantly less training time and memory, and its memory requirements scale better. Crucially, GLM demonstrates robust generalization to unseen variations in the acquisition geometry, like when training only on fully sampled CT data and then testing on sparse-view CT data.

Metalenses offer a path toward creating ultra-thin optical systems, but they inherently suffer from severe, spatially varying optical aberrations, especially chromatic aberration, which makes image reconstruction a significant challenge. This paper presents a novel algorithmic solution to this problem, designed to reconstruct a sharp, full-color image from two inputs: a sharp, bandpass-filtered grayscale “structure image” and a heavily distorted “color cue” image, both captured by the metalens system. Our method utilizes a dual-branch diffusion model, built upon a pre-trained Stable Diffusion XL framework, to fuse information from the two inputs. We demonstrate through quantitative and qualitative comparisons that our approach significantly outperforms existing deblurring and pansharpening methods, effectively restoring high-frequency details while accurately colorizing the image.

To study power system resilience with real data, it is necessary to group individual power outages recorded by utilities into events in which outages cluster and overlap due to extreme weather. We show how to automatically group utility outage data into resilience events based on their time and location. Each outage is represented as a cylinder in three-dimensional space, with a disk centered at the outage location in the geographic plane and a vertical extent corresponding to a limited outage duration, so that two outages overlap in time and space if their cylinders intersect. The grouping algorithm can be implemented as a graph whose nodes are the outages and whose edges represent the overlaps of outages in time and space, so that events are the connected components of the graph. Extending time-based grouping to both time and location is particularly useful when extracting events from outage data collected across a wide area, as it prevents unrelated outages from being incorrectly merged into anomalous events solely due to temporal overlap. We propose a metric to tune the parameters of the grouping algorithm to minimize anomalous events. The grouping of outages into events works with both detailed utility outage data and web-scraped EAGLE-I outage data. Results are validated against NOAA storm event records and DOE-417 reports. The automatically extracted events from utility data closely match documented major weather events.

Multi orbit low earth orbit (LEO) satellites communication is envisioned as a key infrastructure to deliver global coverage, enabling future services from space air ground integrated networks.However, the optimized design of LEO which jointly addresses satellite selection, association control, and resource scheduling while accounting for dynamic visibility in multi orbit constellations still remains open. Satellites moving along distinct orbital planes yield phase shifted ground tracks and heterogeneous, time varying coverage patterns that significantly complicate the optimization.To bridge the gap, we propose a dynamic visibility aware multi orbit satellite selection framework which can determine the optimal serving satellites across orbital layers. The framework is built upon Markov approximation and matching game theory. Specifically, we formulate a combinatorial optimization problem that maximizes the sum rate under per satellite power budgets. The problem is NP hard , combining discrete user association (UA) decisions with continuous power allocation, and an inherently non convex sum rate maximization objective. We address it through a problem specific Markov approximation. Moreover, we alternately solve UA or bandwidth allocation via a matching game and power allocation via a Lagrangian dual program, which together form a block coordinate descent method tailored to this problem. Simulation results show that the proposed algorithm converges to a suboptimal solution across all scenarios. Extensive experiments against four state of the art baselines further demonstrate that our algorithm achieves, on average, approximately 7.85% higher sum rate than the best performing baseline.

In this work, Yoshikawa's manipulability index is used to investigate reinforcement learning (RL) as a framework for morphology optimization in planar robotic manipulators. A 2R manipulator tracking a circular end-effector path is first examined because this case has a known analytical optimum: equal link lengths and the second joint orthogonal to the first. This serves as a validation step to test whether RL can rediscover the optimum using reward feedback alone, without access to the manipulability expression or the Jacobian. Three RL algorithms (SAC, DDPG, and PPO) are compared with grid search and black-box optimizers, with morphology represented by a single action parameter phi that maps to the link lengths. All methods converge to the analytical solution, showing that numerical recovery of the optimum is possible without supplying analytical structure. Most morphology design tasks have no closed-form solutions, and grid or heuristic search becomes expensive as dimensionality increases. RL is therefore explored as a scalable alternative. The formulation used for the circular path is extended to elliptical and rectangular paths by expanding the action space to the full morphology vector (L1, L2, theta2). In these non-analytical settings, RL continues to converge reliably, whereas grid and black-box methods require far larger evaluation budgets. These results indicate that RL is effective for both recovering known optima and solving morphology optimization problems without analytical solutions.

We propose a distributed two-degrees-of-freedom (2DOF) architecture for driving autonomous, possibly heterogeneous, agents to agreement. The scheme mirrors classical servo structures, separating local feedback from network filtering. This separation enables independent network-filter design for prescribed noise attenuation and allows controller heterogeneity to reject local disturbances, including disturbances exciting unstable agreement poles – which is known to be impossible via standard diffusive couplings. The potential of the framework is illustrated via two numerical examples.

Camouflaged object detection identifies objects that blend seamlessly with their surroundings through similar colors, textures, and patterns. This task challenges both traditional segmentation methods and modern foundation models, which fail dramatically on camouflaged objects. We identify six fundamental challenges in COD: Intrinsic Similarity, Edge Disruption, Extreme Scale Variation, Environmental Complexities, Contextual Dependencies, and Salient-Camouflaged Object Disambiguation. These challenges frequently co-occur and compound the difficulty of detection, requiring comprehensive architectural solutions. We propose C3Net, which addresses all challenges through a specialized dual-pathway decoder architecture. The Edge Refinement Pathway employs gradient-initialized Edge Enhancement Modules to recover precise boundaries from early features. The Contextual Localization Pathway utilizes our novel Image-based Context Guidance mechanism to achieve intrinsic saliency suppression without external models. An Attentive Fusion Module synergistically combines the two pathways via spatial gating. C3Net achieves state-of-the-art performance with S-measures of 0.898 on COD10K, 0.904 on CAMO, and 0.913 on NC4K, while maintaining efficient processing. C3Net demonstrates that complex, multifaceted detection challenges require architectural innovation, with specialized components working synergistically to achieve comprehensive coverage beyond isolated improvements. Code, model weights, and results are available at https://github.com/Baber-Jan/C3Net.

Langevin dynamics sampling suffers from extremely low generation speed, fundamentally limited by numerous fine-grained iterations to converge to the target distribution. We introduce PID-controlled Langevin Dynamics (PIDLD), a novel sampling acceleration algorithm that reinterprets the sampling process using control-theoretic principles. By treating energy gradients as feedback signals, PIDLD combines historical gradients (the integral term) and gradient trends (the derivative term) to efficiently traverse energy landscapes and adaptively stabilize, thereby significantly reducing the number of iterations required to produce high-quality samples. Our approach requires no additional training, datasets, or prior information, making it immediately integrable with any Langevin-based method. Extensive experiments across image generation and reasoning tasks demonstrate that PIDLD achieves higher quality with fewer steps, making Langevin-based generative models more practical for efficiency-critical applications. The implementation can be found at \href{https://github.com/tsinghua-fib-lab/PIDLD}{https://github.com/tsinghua-fib-lab/PIDLD}.

A recursive time-varying state feedback is presented for a chain of integrators with unmatched perturbations in continuous and discrete time. In continuous time, it is shown that hyperexponential convergence is achieved for the first state variable \(x_1\), while the second state \(x_2\) remains bounded. For the other states, we establish ISS {\cb property} by saturating the growing {\cb control} gain. In discrete time, we use implicit Euler discretization to {\cb preserve} hyperexponential convergence. The main results are demonstrated through several examples of the proposed control laws, illustrating the conditions established for both continuous and discrete-time systems.

To derive ear canal transfer functions for individualized equalization algorithms of in-ear hearing systems, individual ear canal models are needed. In a one-dimensional approach, this requires the estimation of the individual area function of the ear canal. The area function can be effectively and reproducibly calculated as the inverse solution of Webster's horn equation by finite difference approximation of the time domain reflectance. Building upon previous research, the present study further investigates the termination of the approximation at an optimal spatial resolution, addressing the absence of higher frequencies in typical ear canal measurements and enhancing the accuracy of the inverse solution. Compared to the geometric reference, more precise area functions were achieved by extrapolating simulated input impedances of ear canal geometries up to a frequency of 3.5 MHz, corresponding to 0.1 mm spatial resolution. The low pass of the previous work was adopted but adjusted for its cut-off frequency depending on the highest frequency of the band-limited input impedance. Robust criteria for terminating the area function at the approximated ear canal length were found. Finally, three-dimensional simulated and measured ear canal transfer impedances were replicated well employing the previously introduced and herein validated one-dimensional electro-acoustic model fed by the area functions.

The growing demand for low-power and area-efficient TinyML inference on AIoT devices necessitates memory architectures that minimise data movement while sustaining high computational efficiency. This paper presents FERMI-ML, a Flexible and Resource-Efficient Memory-In-Situ (MIS) SRAM macro designed for TinyML acceleration. The proposed 9T XNOR-based RX9T bit-cell integrates a 5T storage cell with a 4T XNOR compute unit, enabling variable-precision MAC and CAM operations within the same array. A 22-transistor (C22T) compressor-tree-based accumulator facilitates logarithmic 1-64-bit MAC computation with reduced delay and power compared to conventional adder trees. The 4 KB macro achieves dual functionality for in-situ computation and CAM-based lookup operations, supporting Posit-4 or FP-4 precision. Post-layout results at 65 nm show operation at 350 MHz with 0.9 V, delivering a throughput of 1.93 TOPS and an energy efficiency of 364 TOPS/W, while maintaining a Quality-of-Result (QoR) above 97.5% with InceptionV4 and ResNet-18. FERMI-ML thus demonstrates a compact, reconfigurable, and energy-aware digital Memory-In-Situ macro capable of supporting mixed-precision TinyML workloads.

Advances in miniaturised implantable neural electronics have paved the way for therapeutic brain-computer interfaces with clinical potential for movement disorders, epilepsy, and broader neurological applications. This paper presents a mixed-signal analogue front end (AFE) designed to record simultaneously both extracellular action potentials (EAPs) and local field potentials (LFPs). The feedforward path integrates a low-noise amplifier (LNA) and a successive-approximation-register (SAR) analogue-to-digital converter (ADC), while the feedback path employs a fixed-point infinite-impulse-response (IIR) Chebyshev Type II low-pass filter to suppress sub-mHz components via bulk-voltage control of the LNA input differential pair using two R-2R pseudo-resistor digital-to-analogue converters (DACs). The proposed AFE employs a low-power (LP) mode and an offset-cancellation high-performance (HP) mode. The proposed AFE achieves 40.55 dB gain and supports neural recording from 0.1 Hz to 5.705 / 9.66 kHz (LP / HP), with typical input-referred noise of 3.9 / 6.615 uVrms in the LFP band and 11.42 / 11.11 uVrms in the EAP band (LP / HP). Its typical power per channel is 5.44 uW (LP) and 11.35 uW (HP), while it occupies 0.198 mm2.

Complex electromagnetic environments, often containing multiple jammers with different jamming patterns, produce non-uniform jamming power across the frequency spectrum. This spectral non-uniformity directly induces severe distortion in the target's HRRP, consequently compromising the performance and reliability of conventional HRRP-based target recognition methods. This paper proposes a novel, end-to-end trained network for robust radar target recognition. The core of our model is a CFA module that operates directly on the complex spectrum of the received echo. The CFA module learns to generate an adaptive frequency-domain filter, assigning lower weights to bands corrupted by strong jamming while preserving critical target information in cleaner bands. The filtered spectrum is then fed into a classifier backbone for recognition. Experimental results on simulated HRRP data with various jamming combinations demonstrate our method's superiority. Notably, under severe jamming conditions, our model achieves a recognition accuracy nearly 9% higher than traditional model-based approaches, all while introducing negligible computational overhead. This highlights its exceptional performance and robustness in challenging jamming environments.

The growing scale of modern farms has increased the need for efficient and adaptive multi-agent coverage strategies for pest, weed, and disease management. Traditional methods such as manual inspection and blanket pesticide spraying often lead to excessive chemical use, resource waste, and environmental impact. While unmanned aerial vehicles (UAVs) offer a promising platform for precision agriculture through targeted spraying and improved operational efficiency, existing UAV-based approaches remain limited by battery life, payload capacity, and scalability, especially in large fields where single-UAV or uniformly distributed spraying is insufficient. Although multi-UAV coordination has been explored, many current frameworks still assume uniform spraying and do not account for infestation severity, UAV dynamics, non-uniform resource allocation, or energy-efficient coordination. To address these limitations, this paper proposes a Density-Driven Optimal Control (D2OC) framework that integrates Optimal Transport (OT) theory with multi-UAV coverage control for large-scale agricultural spraying. The method supports non-uniform, priority-aware resource allocation based on infestation intensity, reducing unnecessary chemical application. UAVs are modeled as a linear time-varying (LTV) system to capture variations in mass and inertia during spraying missions. The D2OC control law, derived using Lagrangian mechanics, enables efficient coordination, balanced workload distribution, and improved mission duration. Simulation results demonstrate that the proposed approach outperforms uniform spraying and Spectral Multiscale Coverage (SMC) in coverage efficiency, chemical reduction, and operational sustainability, providing a scalable solution for smart agriculture.

With the integration of massive distributed energy resources and the widespread participation of novel market entities, the operation of active distribution networks (ADNs) is progressively evolving into a complex, multi-scenario, and multi-objective problem. Although expert engineers have developed numerous domain specific models (DSMs) to address distinct technical problems, mastering, integrating, and orchestrating these heterogeneous DSMs still entail considerable overhead for ADN operators. Therefore, an intelligent approach is urgently required to unify these DSMs and enable efficient coordination. To address this challenge, this paper proposes the ADN-Agent architecture, which leverages a general large language model (LLM) to coordinate multiple DSMs, enabling adaptive intent recognition, task decomposition, and DSM invocation. Within the ADN-Agent, we design a novel communication mechanism that provides a unified and flexible interface for diverse heterogeneous DSMs. Finally, for specific language-intensive subtasks, we propose an automated training pipeline for fine-tuning small language models, thereby effectively enhancing the overall problem-solving capability of the system. Comprehensive comparisons and ablation experiments validate the efficacy of the proposed method and demonstrate that the ADN-Agent architecture outperforms existing LLM application paradigms.