Peer Revenue Past citations are no guarantee of future returns

Papers

Fresh from arXiv, typeset properly. Highlighted words trade on the market.

Physics

Watch Physics (sign in to use)

Wednesday 20 May

Applied Physics

Lasing from SOI-integrated GaAsSb nanowires via resonator-driven optical feedback

Silicon photonic integrated circuits critically depend on compact on-chip light sources, for which nanowire (NW) lasers are an attractive solution. However, their practical implementation is often limited by broad emission linewidths and poor frequency stability resulting from weak optical feedback. Here, we integrate individual GaAsSb NWs by transfer-printing onto silicon-on-insulator (SOI) racetrack resonators to realize optical feedback at silicon-transparent wavelengths. Finite-difference-time-domain simulations reveal efficient coupling between the hybrid NW-waveguide mode and the fundamental TE resonator mode, with calculated cavity Q-factors exceeding 10$^4$. Experimentally, we observe feedback-induced lasing emission at a low threshold (P$_{th}$) of 8.6 $\pm$ 1.8 $\mu$J/cm$^2$. Compared to identical NW lasers without SOI resonator, the linewidth is reduced by more than a factor of four at 3P$_{th}$ and remains stable below 1.8 meV up to 5P$_{th}$. Our results demonstrate NW-based light sources on SOI and show that tailored resonator designs enable improved linewidth control and frequency stabilization.
Read the full abstract

All authors J. Zöllner, C. Doganlar, C. García Marcilla, S. Meder, G. Koblmüller, J. J. Finley

Chemical Physics

DynaMate2: runtime registration of expert-defined tools for agentic scientific workflow automation

Agentic large-language-model systems can coordinate scientific tools, but many implementations remain difficult for domain scientists to extend without modifying the source orchestration code or relying on unconstrained code generation. DynaMate2 is a LangGraph-based multi-agent framework for converting expert-defined Python functions into persistent AI-callable tools. The architecture separates domain execution from LLM supervision: registered tools perform scientific operations, while a supervisor LLM decomposes goals, selects specialist agents, routes inputs, and propagates outputs across steps. DynaMate2 supports: runtime tool registration from inline code, source files, and explicitly requested natural-language specifications; persistent storage of tools, agents, and conversation state; and a web interface for interactive workflow assembly. We demonstrate the framework on a molecular simulation workflow in which a single instruction retrieves a MACE foundation model, builds a NaCl-water configuration, runs an ASE molecular dynamics trajectory, and generates energy and temperature diagnostics. The demonstration illustrates how validated workflow components can be composed into a supervised agentic pipeline without rewriting the framework. DynaMate2 therefore provides a reusable template for extending LLM-based automation to research groups with existing Python workflows, while preserving the need for explicit tool validation, reproducibility logs, and deployment-specific safeguards.
Read the full abstract

All authors Orlando A. Mendible-Barreto, Ajay Vallabh, Ubaldo M. Córdova-Figueroa, Yamil J. Colón

Materials Science · Cross-listed from math.OC

Polynomial diagrams for microstructure modelling

We formulate a framework of polynomial diagrams, which are a generalisation of power diagrams (PDs) and anisotropic power diagrams (APDs) allowing for boundaries between cells to be algebraic curves of a prescribed degree. We show that they arise naturally from rephrasing PDs (APDs) as first-degree (second-degree) instances of linear parametrised minimisation diagrams. We also develop an efficient GPU-accelerated framework for fitting polynomial diagrams to image data using Legendre polynomials and by maximising a regularised concave objective function adapted from classical logistic regression literature. A largely self-contained analysis of the optimisation algorithm is also provided, including identification of scale and gauge invariances and the limiting objective function as the regularisation parameter vanishes. We apply the algorithm to fit polynomial diagrams to electron backscatter diffraction images of steel.
Read the full abstract

All authors David P. Bourne, Maciej Buze, Thomas Gallouët, Quentin Mérigot

General Relativity and Quantum Cosmology

Effective spherical symmetry in Loop Quantum Gravity: A path integral approach

In this work a loop quantum corrected model is obtained for spherically symmetric space-times in the vacuum. This effective model is derived by the use of the path integral method, previously employed in several models of Loop Quantum Cosmology. Our principal aim is to find explicit corrections corresponding to inverse triad and holonomy effects that commonly arise from the loop quantization procedure. These corrections modify the Hamiltonian constraint of the classical theory, adding quantum parameters that represent the length of the holonomies considered during quantization. The semiclassical theory yielded reduces to the classical case when small values of such length are taken to be small. Solutions to the effective dynamics of a simplified version of the complete corrected theory are then found and used to describe an effective geometry with inverse triad corrections. This modified space-time represents a black hole with a curvature singularity in its interior which, contrary to its classical counterpart, does not lead to null geodesic incompleteness. For the case of holonomy corrections, preliminary arguments are given in favor of a potential singularity resolution.
Read the full abstract

Instrumentation and Detectors

A 24-Channel Ultra-Low-Noise Preamplifier for dN/dx Measurements with Drift Tube Detectors

Cluster counting dN/dx is a promising method to enhance particle identification for gaseous detectors, especially in next-generation collider experiments like the FCC-ee, where good pion-kaon separation over a broad momentum range is essential. However, its implementation in large-scale systems has been limited by the challenging requirements for high-resolution signal amplification and readout. This paper presents a 24-channel ultra-low-noise preamplifier board designed for drift tube detectors to enable dN/dx measurements. The three-stage amplification topology employs SiGe transistors and integrates dedicated noise-minimization techniques, achieving a charge gain of 21.11 mV/fC from 0.3 fC to 50 fC, a bandwidth of 542 MHz, and a voltage gain of 47.8 dB. The measured voltage noise density is 0.35 nV/sqrt(Hz), surpassing most of the state-of-the-art preamplifiers for gaseous and silicon detectors. Validation tests conducted on the sMDT chambers at the CERN Proton Synchrotron test beam facility demonstrate that the proposed design meets the stringent preamplifier requirements for implementing the dN/dx method in drift-tube detector systems, achieving an equivalent noise charge of 0.14 fC and a signal-to-noise ratio of 73 when operated with a He:iC4H10 (90:10) gas mixture. The design also shows promise for broader application in other gaseous or semiconductor detectors.
Read the full abstract

All authors Jiajin Ge, Chihao Li, Can Suslu, Yuxiang Guo, Emmett Salzer, Tiesheng Dai, Jianming Qian, Bing Zhou, Junjie Zhu

Astrophysics of Galaxies

Revisiting the mass metallicity relation and the fundamental metallicity relation of dwarf galaxies at cosmic noon with NIRISS

We extend the stellar-mass gas-phase metallicity relation (MZR) at $z = 1.1-3.4$ down to the extremely low-mass regime using 183 galaxies with $\log(M_*/M_\odot) = 6.3-10.2$, based on deep JWST/NIRISS slitless spectroscopy from the NGDEEP program. The derived MZR is in excellent agreement with our previous result from 50 galaxies in the GLASS-JWST sample, underscoring the robustness and universality of this relation. Together, these datasets constitute the largest sample of dwarf galaxies yet obtained with NIRISS. The observed MZR slope, $\beta\simeq0.24\pm0.03$, remains constant across nearly four orders of magnitude in stellar mass. Analytical modeling of the metal-loading factor of outflows ($\zeta_\textrm{out}$) indicates that, at $M_*\lesssim10^8M_\odot$, $\zeta_\textrm{out}$ becomes progressively less dominant than the gas fraction ($\mu_\textrm{gas}$) in regulating the MZR slope. Using this enlarged NIRISS sample, we further test the existence of the fundamental metallicity relation (FMR). We find no robust evidence for an additional SFR dependence beyond the MZR, nor any reduction in metallicity scatter when SFR is included. Examination of systematic uncertainties in \oh, $M_*$ and SFR suggests that the MZR slope ($\beta\sim0.22$) is robust, and that different assumptions about the strong-line calibrations or star-formation history (SFH) of the galaxies change the slope by less than 1-$\sigma$. At the current depth of the NIRISS data, evidence for an FMR among high-redshift dwarf galaxies remains inconclusive, highlighting the need for larger samples, and deeper observations.
Read the full abstract

All authors Xianlong He, Zihao Li, Xin Wang, Zheng Cai, Tucker Jones, Tommaso Treu, Benedetta Vulcani, Matthew A. Malkan, Karl Glazebrook

Quantum Physics · Cross-listed from cs.RO

Q-SpiRL: Quantum Spiking Reinforcement Learning for Adaptive Robot Navigation

Adaptive robot navigation in dynamic environments requires policies that can reach the target reliably while producing efficient and stable trajectories. This paper presents Q-SpiRL, a quantum spiking reinforcement learning framework for obstacle-aware robot navigation. The framework develops and evaluates five agent families: tabular Q-learning, classical MLP, classical SNN, quantum-enhanced MLP (QMLP), and quantum-enhanced spiking neural network (QSNN). While all models are implemented under a unified training and evaluation pipeline, the QSNN is the central architecture of interest, as it combines spike-based temporal processing with variational quantum feature transformation. Experiments are conducted across three grid-world environments of increasing size, namely 20x20, 30x30, and 40x40, with both static and dynamic obstacles. Performance is assessed using success rate, success-weighted path length, path length, and turn rate under deterministic inference. Results show that QSNN achieves the strongest overall trade-off between task completion, trajectory efficiency, and motion smoothness, reaching up to 99% success rate while maintaining high path efficiency in the most challenging setting. Execution on IBM quantum hardware further demonstrates the feasibility of deploying the proposed hybrid policy under real-device conditions.
Read the full abstract

All authors Mohamed Khair Altrabulsi, Nouhaila Innan, Alberto Marchisio, Muhammad Kashif, Muhammad Shafique

High Energy Physics (Phenomenology)

The Alternative Left-Right Scenario: Unitarity, Vacuum Stability and RG Evolution

We study the theoretical constraints on the scalar sector of the Alternative Left-Right Model (ALRM), an $E_6$-motivated extension of the Standard Model based on the gauge group $\mathrm{SU}(3)_c \otimes \mathrm{SU}(2)_L \otimes \mathrm{SU}(2)_{R'} \otimes \mathrm{U}(1)_{B-L}$, supplemented by a global $\mathrm{U}(1)_S$ symmetry. We derive the complete set of tree-level perturbative unitarity constraints on the model, resulting in 14 independent conditions on the quartic scalar couplings. When combined with the boundedness-from-below conditions and the requirement of positive-definite scalar mass-squared eigenvalues, these constraints are found to be complementary, with their simultaneous imposition yielding significantly more stringent restrictions on the parameter space than either set alone. We then perform a one loop renormalization group analysis, evolving the model parameters from the electroweak scale up to a high energy cut-off scale, and requiring that the vacuum stability, the unitarity, and the perturbativity conditions are preserved throughout. The renormalisation group evolution is found to restrict the allowed parameter space considerably beyond the tree-level bounds, with the constraints on the quartic couplings becoming more stringent as the cut off scale is raised. Consequently, the physical scalar masses in the model acquire upper bounds. For the right-hand symmetry breaking scale, $v_R = 10$ TeV and requiring theoretical consistency up to $10^{16}$ GeV, we obtain $m_{H_1^\pm} \lesssim 6.5$ TeV, $m_{H_2^\pm} \lesssim 1.5$ TeV, and $m_{H_1^0} \simeq m_{A_1} \lesssim 1.3$ TeV, with all bounds scaling with $v_R$. These findings offer a predictive and falsifiable framework for searches of the extended Higgs sector of the ALRM at the current and future collider experiments.
Read the full abstract

All authors Hrishikesh Deka, Avnish, Sumit K. Garg, Poulose Poulose

High Energy Physics (Phenomenology)

First mass determination of electroweak vortex rings in the Standard Model

We report the first rigorous evaluation of the physical mass of electroweak vortex rings, establishing precise values of 18.01 and 26.80 TeV for solutions characterized by different winding numbers. Analysis of the internal structure reveals that repulsive interactions shape the geometry of these configurations, while complex current distributions lead to a neutral analogue of Ampere's circuital law, suggesting a corresponding self-stabilizing pinch mechanism. These findings set the energy scales for the potential observation of such configurations at future colliders and offer a framework for understanding topological structures in the Standard Model.
Read the full abstract

All authors Dan Zhu, Qingyue Zhang, Khai-Ming Wong, Xurong Chen

Mesoscale and Nanoscale Physics

Field-tunable spin-valley transport in monolayer MoS$_2$

We study field-controlled spin-valley transport in monolayer MoS$_2$ through a single electrostatic barrier and a uniform off-resonant elliptically polarized irradiation. Starting from the massive Dirac Hamiltonian with intrinsic spin-orbit coupling, we use a high-frequency Floquet expansion to obtain an effective static model with a laser-renormalized mass (gap) term. We solve the scattering problem by spinor matching and derive the exact analytic expression for the transmission. The numerical results show that the drive tunes both the spin-valley-dependent propagation threshold inside the barrier and the Fabry-Pérot phase, creating controllable pass/stop bands. By varying both the laser intensity (amplitude) and the polarization shape, we show that the same junction can be switched between broadband valley filtering and resonance-selective operation, and the valley contrast remains visible in the Landauer conductance. Our findings establish an efficient route for realizing optically reconfigurable valleytronic and spintronic functionalities in MoS$_2$.
Read the full abstract

All authors Kamal Azaidaoui, Hocine Bahlouli, Clarence Cortes, David Laroze, Ahmed Jellal

Quantum Physics

Circuits of Quantum Hashing and Quantum Fourier Transform for a Cactus as a Qubit Connectivity Graph

We present a quantum circuit implementation of the quantum hashing algorithm (quantum fingerprinting) for a quantum device with restrictions on the application of two-qubit gates by a qubit connectivity graph. We present an optimization technique for the shallow circuit for quantum hashing in the case of a cactus as a qubit connectivity graph. The algorithm has $O(n^3)$ complexity to build the circuit, where $n$ is the number of qubits and $m$ is the number of connections (edges) in the graph. It is improvement compared to the existing exponential-time algorithm in the case of arbitrary graphs. The algorithm uses solution for the shortest non-simple 1-covering path problem as a subroutine. We present an $O(n^3)$-time solution for this graph-theory problem in the case of a cactus. This result can be interesting independently. The algorithm also used for improving of the quantum circuit for Quantum Fourier Transform.
Read the full abstract

Materials Science

Anisotropic Crystallization Kinetics and Interfacial Dynamics of Phase-Change Material Sb$_2$S$_3$ from Machine Learning Force Field Simulations

The phase-change material antimony sulfide (Sb$_2$S$_3$) relies on rapid and reversible phase transitions between crystalline and amorphous states, which are critical for their performance in data storage and photonics applications. In this work, a machine learning force field is developed based on the moment tensor potential approach, allowing us to understand the atomistic origin of the structural evolution and crystallization kinetics in Sb$_2$S$_3$ for the first time, by enabling large-scale molecular dynamics simulations (up to 7680 atoms for 40 ns). Sb$_2$S$_3$ shows anisotropic growth rates with the [100] facet exhibiting the fastest growth due to the strong Sb-S covalent bonding along its quasi-1D ribbon-like structure of its crystalline phase. The activation energy for crystal growth is found to be 0.55-0.57 eV, whereas that for diffusion is around 1.16-1.56 eV. The lower activation energy for crystal growth indicates that its heterogeneous crystallization is interface controlled rather than diffusion limited, unlike GST and GeTe with atomic attachment at the solid-liquid interface being energetically favoured over long range atomic transport. These findings provide key insights into the structural, thermodynamic, and kinetic properties of Sb$_2$S$_3$, paving the way for optimizing its functionality including switching speed, reliability, and energy efficiency.
Read the full abstract

Materials Science

Generalized Phase Diagrams for Graphene CVD growth on Copper

Understanding the competition between first-layer lateral expansion and second-layer nucleation is essential for layer-controlled graphene growth via chemical vapor deposition (CVD). Building on our previous phase diagram framework based on the dimensionless parameters $\alpha$ and $\Gamma$, we develop an enhanced model incorporating two previously neglected effects: thermal-expansion-induced substrate strain and chemical desorption of carbon monomers via reverse dehydrogenation. First-principles calculations are employed to determine the strain-dependent diffusion and attachment barriers on both exposed and graphene-covered Cu(111) surfaces. By mapping the multi-step CVD process into an effective quasi-physical vapor deposition, we construct a generalized phase diagram characterized by the coupled effects of $\alpha$, $\Gamma$, and a newly introduced desorption parameter $Z$. Our results show that tensile strain expands the bilayer graphene (BLG) growth window for critical nucleus sizes $i^*>1$. In contrast, chemical desorption suppresses BLG formation in the high-$\Gamma$ regime via $Z$-dependent monomer depletion. This unified framework provides a predictive guide for the rational synthesis of high-quality bilayer graphene by linking macroscopic growth parameters to microscopic layer-selection mechanisms.
Read the full abstract

All authors Tongtong Wang, Ke Jin, Yishi Zhang, Dajun Shu

Quantum Physics

Multi-Qubit Entanglement of Unit Cell Pairs in SiMOS

Spin qubits in silicon-MOS (SiMOS) quantum dots have recently demonstrated compatibility with existing industry standard CMOS fabrication techniques. These devices have routinely achieved single- and two-qubit gate fidelities above 99% and demonstrated highly entangled two-qubit Bell states in isolated double quantum dot (DQD) unit cells, however coupling between unit cells has remained challenging. In this work, we present a two unit cell, four-qubit SiMOS processor with universal controllability and fully parallelised state initialisation and readout. We use this processor to generate maximally entangled three-qubit states, including the Greenberger-Horne-Zeilinger (GHZ) state, and certify multipartite entanglement through violation of the classical Mermin-witness bound. By using a fully symmetric dynamically decoupled gate sequence to create our entangled states, we are able to preserve the lifetime of the entanglement beyond $T_2^*$, to a time limited instead by $T_2^\textrm{Hahn}$. These demonstrations pave a road to the scalable operation of larger SiMOS processors, and achieving high purity, long-lived multi-qubit entangled states in them.
Read the full abstract

All authors Cameron Jones, Jonathan Y. Huang, Santiago Serrano, MengKe Feng, Gerardo A. Paz-Silva, Tuomo Tanttu, Paul Steinacker, Fay E. Hudson, Wee Han Lim, Nikolay V. Abrosimov, Hans-Joachim Pohl, Michael L. W. Thewalt, Andrew S. Dzurak, Andre Saraiva, Arne Laucht, Chih Hwan Yang

High Energy Astrophysical Phenomena

A MINOT-based Study of Gamma-ray emission from SPT-CL J2012-5649/Abell 3667

We present an analysis of the non-thermal properties of the merging galaxy cluster SPT-CL J2012-5649/Abell~3667 ($z = 0.0556$, $M_{500} = 7.16 \times 10^{14}\ M_\odot$) using the MINOT non-thermal emission modeling framework. The predicted hadronic gamma-ray flux from $pp$ interactions in the $1$–$300\ \mathrm{GeV}$ band is $2.82 \times 10^{-11}\ \mathrm{cm^{-2}\ s^{-1}}$ within $R_{500}$, rising to $1.15 \times 10^{-10}\ \mathrm{cm^{-2}\ s^{-1}}$ at the truncation radius ($3.7\,R_{500}$), in broad agreement with the Fermi-LAT reported flux of $1.3 \times 10^{-10}\ \mathrm{cm^{-2}\ s^{-1}}$. Approximately $76\%$ of the predicted hadronic flux originates from beyond $R_{500}$. The Inverse Compton contribution from cosmic-ray electrons is subdominant relative to the hadronic $\pi^0$-decay gamma-ray component by a factor of ${\sim}20$ in the $1$–$300\ \mathrm{GeV}$ energy band, and therefore does not contribute significantly to the observable signal. The best fit of the observed Fermi-LAT data is achieved with a hadronic emission assuming a proton spectrum $\propto E^{-3.5}$ and a proton energy density almost in equipartition with the thermal energy density. Even though those parameters may look extreme, they could well be explained by the particle acceleration by low Mach number accretion shocks.
Read the full abstract

Fluid Dynamics

Deep Reinforcement Learning Discovers a Novel Control Algorithm for Mitigating Flow-Induced Vibrations in Underactuated Tandem Cylinders

This study presents the first experimental implementation of deep reinforcement learning (DRL) for the active real-time suppression of flow-induced vibrations in simultaneously vibrating tandem cylinders using rotary actuation, considering fully actuated and underactuated configurations. In the fully actuated case, where both cylinders are independently controlled, the DRL agent discovers a high-frequency, phase-locked bang-bang control strategy that suppresses the vibrations of both cylinders by more than 95%. Analysis of the training dynamics reveals a physically interpretable learning process in which the agent first identifies the optimal phase relationship between the actuators before refining the actuation frequency. In the underactuated configuration, where only the upstream cylinder is actuated, equally weighted rewards produce ineffective control, suppressing vibrations only in the actuated cylinder. Introducing asymmetric reward weighting enables the DRL agent to discover a low-frequency lock-on strategy that achieves 70% and 90% vibration suppression in the upstream and downstream cylinders, respectively. For staggered arrangements with lateral offset, conventional training fails to converge, requiring a curriculum learning approach. The resulting two-stage curriculum identifies a statically biased bi-harmonic rotational control signal capable of suppressing vibrations in both cylinders. The success of the underactuated control strategy highlights its potential to reduce energy consumption and hardware complexity in multi-body flow control systems.
Read the full abstract

Quantum Physics

Generalized quantum Stein's lemma for mixed sources

The generalized quantum Stein's lemma characterizes the optimal asymptotic exponent of the type-II error in quantum hypothesis testing for an independent and identically distributed (IID) null hypothesis against a composite alternative hypothesis. Classically, a probabilistic mixture of IID sources arises as a natural generalization of IID sources, and, in the non-composite setting, the optimal type-II error exponent in hypothesis testing for such classical mixed sources is known to be characterized concisely by the worst-case component of the mixture. In this work, we extend these foundational results to composite quantum hypothesis testing where the null hypothesis is a mixed source, i.e., a probabilistic mixture of IID quantum states, and the alternative hypothesis is composite as in the generalized quantum Stein's lemma. When the type-I error vanishes asymptotically, we characterize the optimal type-II error exponent of this composite quantum hypothesis testing problem in terms of the worst-case component of the mixture, by developing techniques for the non-commutative quantum setting inspired by the classical information-spectrum analysis. We also show that the analogous characterization does not hold in general for a fixed nonzero type-I error threshold, by providing a counterexample beyond the vanishing type-I error regime. These results clarify the applicability of the generalized quantum Stein's lemma to highly non-IID null hypotheses arising from arbitrary finite probabilistic mixtures of IID quantum states.
Read the full abstract

Optics

Mid-infrared single-photon sub-pixel temporal ghost imaging

Temporal ghost imaging (TGI) enables ultrafast temporal signal recovery using slow detectors, offering a promising route for high-speed mid-infrared (MIR) detection. However, conventional schemes remain limited in temporal resolution by the modulation bandwidth or pattern timescale, and are mostly confined to structured illumination. Here, we demonstrated a high-resolution MIR single-photon computational TGI system, which integrated nonlinear structured detection with sub-pixel temporal shifting. A pre-programmed near-infrared pump serves as a temporally optical gate to drive sum-frequency generation in a nonlinear crystal. Consequently, MIR waveforms at 3.4 $\mu$m were upconverted, and captured by a room-temperature silicon detector. We realized sub-pixel operation by fractional-bin temporal stepping of the gate and multi-shot fusion via pseudo-inverse reconstruction. The sub-pixel shifting strategy decouples the achievable resolution from modulation speed, enabling 40 ps temporal precision at a driving rate of only 3.125 Gbps. This performance surpasses both detector jitter and pattern-rate limits, while maintaining single-photon sensitivity. The presented paradigm establishes a versatile route for ultrafast MIR waveform reconstruction, opening new opportunities in high-resolution infrared sensing and quantum photonics.
Read the full abstract

All authors Wen Zhang, Kun Huang, Zhibin Zhao, Huijie Ma, Ziyu He, Jianan Fang, Heping Zeng

Quantum Physics

Precision and Privacy in Distributed Quantum Sensing: A Quantum Fisher Information Duality

We establish a quantum Fisher information (QFI) duality for distributed quantum sensor networks with local phase encoding. For any $N$-qubit probe state, where $N$ denotes the number of sensors, $F_Q(\boldsymbol{w}^\top \boldsymbol{\theta}) + F_Q(\boldsymbol{v}^\top \boldsymbol{\theta}) \leq N$ for all unit orthogonal sensing directions $\boldsymbol{w}$ and $\boldsymbol{v}$, with equality for all equatorial states when $N=2$ and for Greenberger–Horne–Zeilinger (GHZ) states when $N\geq 2$. Heisenberg-limited precision for direction $\boldsymbol{w}$, $F_Q(\boldsymbol{w}^\top \boldsymbol{\theta})=N$, saturates the bound and simultaneously forces zero QFI for all other independent directions. This can be interpreted as the condition for parameter privacy in distributed quantum sensing: attaining Heisenberg-limited precision for the sensing target renders all alternative privacy-intrusive estimations impossible.
Read the full abstract

Geophysics · Cross-listed from cs.CE

HyFrac.fun: A 3D Hydraulic Fracturing Simulator on Cloud

When multiple hydraulic fractures propagate simultaneously from a horizontal wellbore, elastic stress-shadow interactions generate complex non-planar three-dimensional geometries whose effect on subsequent reservoir drainage has infrequently been quantified, because the propagation and production solvers have historically been incompatible stand-alone tools. This paper presents HyFrac.fun, a cloud-native platform that bridges this gap by exploiting a structural isomorphism between the two SGBEM–FEM governing operator systems. The platform enables automated zero-conversion handoff of the evolved 3D fracture mesh directly to the steady-state Darcy production solver for realizing a fully integrated lifecycle simulation of multi-stage non-planar hydraulic fractures. The lifecycle analysis reveals a double shadow phenomenon: the mechanical stress shadow that suppresses inner-fracture growth during stimulation mirrors a fluid pressure shadow that reduces the inner fracture's drawout rate at small cluster spacing. Critically, switching to a shear-thinning power-law fracturing fluid leaves the fracture trajectories and production rates almost unchanged, demonstrating that stress-shadow-controlled fracture geometry instead of fluid rheology is the primary determinant of long-term production efficiency at equal injection rates. These physics findings are accessible from integrated fracture propagation and production simulations.
Read the full abstract

Optics

Coherent control of the Goos-Hänchen shift in Otto structure

We investigate controlling the lateral Goos-Hänchen (GH) shift for a TM-polarized field reflected from Otto structure containing four level N-type atomic medium. The N-type atomic configuration can be formed by coupling the standard three-level $\Lambda$ system to an additional upper energy level through a coherent driving field. The medium can then be switched from transparent to absorptive under the effect of the driving field. In the Otto structure, an air gap typically separates a dielectric prism from a metal film. We show that the sign and magnitude of the GH shift can be highly controlled when the air gap is replaced by the coherent atomic medium. This can be achieved by adjusting the strength of the applied fields to the atomic medium, while the geometrical characteristics of the proposed structure are unchanged.
Read the full abstract

Cosmology and Nongalactic Astrophysics

Probing late-time deviations from $\Lambda$CDM with a quadratic dark energy expansion

We investigate the observational viability of a quadratic dark energy expansion (QDEE) model as a phenomenological extension of the standard $\Lambda\mathrm{CDM}$ cosmological framework. This approach introduces the additional degrees of freedom that permit mild late-time deviations from a constant dark-energy component while preserving the standard early-Universe behavior. We constrain the model using a comprehensive combination of cosmological datasets, including Planck 2018 cosmic microwave background (CMB) measurements, Atacama Cosmology Telescope (ACT) Data Release 6 (DR6) and South Pole Telescope (SPT-3G) data, Dark Energy Spectroscopic Instrument (DESI) Data Release 2 (DR2), and the Pantheon Plus type Ia supernova compilation. Our results show that the QDEE framework shifts the inferred Hubble constant toward higher values relative to $\Lambda\mathrm{CDM}$, partially alleviating the tension with local measurements while remaining consistent with early-Universe constraints. Bayesian model comparison indicates strong evidence in favor of this framework over standard $\Lambda\mathrm{CDM}$ across multiple dataset combinations. Posterior predictive checks further demonstrate that the model yields predictions consistent with the observed data within statistical uncertainties.
Read the full abstract

All authors Sehjal Khandelwal, Abraão J. S. Capistrano, Suresh Kumar, Rafael C. Nunes

Optics

Wide-field mid-infrared edge-enhanced upconversion imaging

Edge-enhanced imaging is critical for visualizing weakly absorbing and transparent objects. Extending this functionality into the mid-infrared (MIR) region enables chemical sensitivity and improved imaging performance for biomedical, material, and remote-sensing applications. Here, we present a wide-field MIR edge-enhanced upconversion imaging system that integrates vortex-pump complex-amplitude engineering with aperiodic quasi-phase matching. In contrast to the bright-field modality, the wide-field edge-enhanced operation shows sensitive dependence on the crystal position relative to the Fourier plane. The system achieves single-shot operation with a 25-mm field of view and 79-$\mu$m spatial resolution, yielding a record-high space-bandwidth product of $7.9 \times 10^4$. We show that this capability enables direct visualization of phase gradients in transparent optical elements and enhances structural contrast in biological specimens. The demonstrated architecture combines high sensitivity, spectral specificity, and robust edge detection, offering a promising route toward advanced MIR imaging in industrial inspection and biomedical diagnostics.
Read the full abstract

All authors Mengyao Yu, Zhuohang Wei, Jianan Fang, Jixi Zhang, Tingting Zheng, Shina Liao, Kun Huang, Heping Zeng

Mathematical Physics · Cross-listed from math.AP

Addition Theorems for Real Vector Spherical Harmonics and Explicit Matrix Representations of the Quasi-Periodic Elastic Single Layer Potential

This paper develops a multipole expansion method for the quasi-periodic elastic single layer potential $\mathcal{S}_D^{\alpha,0}$ associated with the Kelvin tensor in one-dimensional periodic arrays. A key step in this approach is the derivation of translation addition theorems for the real vector spherical harmonics $V_{lm}$, $W_{lm}$, and $X_{lm}$. These addition theorems enable the exact calculation of all matrix entries of $\mathcal{S}_D^{\alpha,0}$ in closed form. By working entirely within the spherical harmonic basis, the proposed analytical method overcomes the poor convergence and mesh-dependent issues commonly caused by the direct surface discretization of weakly singular kernels. Additionally, the involved infinite sums are evaluated exactly using polylogarithm functions, which eliminates the need for series truncation. As an application, the integral equation $\mathcal{S}_D^{\alpha,0}[f]=\varphi$ is reduced to a linear system. This framework is further extended to dimer geometries consisting of two disjoint balls in each cell, where the off-diagonal matrices are explicitly formulated via the Lerch transcendent.
Read the full abstract

Instrumentation and Methods for Astrophysics

Data Formats and Visualisation BoF

ADASS used to hold a regular FITS BoF (Birds of a Feather meeting). As other data formats started to be used along with FITS, this became a Data Formats BoF, and there was some element of competition between formats, together with an occasional attempt to create a unified Format that could replace FITS as the only astronomical format needed. The impetus for this year's BoF came from an acceptance that astronomy would have to work with multiple formats in the foreseeable future, and a question: Did the use of multiple formats make it difficult to write general-purpose utilities, for example visualisation programs such as SAOImage/DS9, and if so was this a problem? The resulting discussion was interesting, and although it came to no ultimate conclusion, it at least made it clearer why such a conclusion was hard to reach.
Read the full abstract

Soft Condensed Matter

What Lies Between Crystal and Randomly Packed Structures? A General Characterization of Non-Periodic Order

In this paper we address the characterization of the structure of condensed materials, periodic and non-periodic. Carrying out an extensive study of over 7000 different groundstate structures of a 2D lattice model of binary packing, we find a predominance of non-periodic structures (over 96%) that extend across the entire range of possible diversities. These non-periodic structures are resolved by establishing whether a structure will accommodate or reject additional local structures. This property, structural selectivity, is treated as a signature of an underlying ordering principle. The major result of the paper is the determination that roughly 35% of the non-periodic structures are selective and, hence, ordered in some way. This selectivity extends up to a diversity of ~ 9, well beyond the upper threshold for diversity in periodically ordered states.
Read the full abstract

Quantum Physics

Strongly-coupled non-Markovian waveguide QED with input-output HEOM

We consider the problem of modeling a single qubit in contact with a one-dimensional waveguide beyond the standard perturbative and Markovian approximations. Using the recently developed input-output hierarchical equations of motion (io-HEOM), we investigate multiple examples of such waveguides, characterized by different spectral densities. Our examples highlight that the io-HEOM method can accurately capture non-Markovianity in waveguide QED from two distinct origins. The first source of non-Markovianity is spatially non-local coupling between the qubit and the waveguide. By examining two examples with non-local coupling, we show how the coupling function affects the steady-state bound photons, and demonstrate the release of these photons when the qubit energy is quenched. The second source of non-Markovianity is non-linear dispersion. We illustrate this scenario using the example of a cavity array with point-like coupling, where the non-linear dispersion leads to persistent oscillations due to Van Hove singularities in the spectral density.
Read the full abstract

All authors Neill Lambert, Yi-Te Huang, Yueh-Nan Chen, Paul Menczel, Franco Nori

Strongly Correlated Electrons

Giant nonlinear conductivity in 2D electron gas from substrate-induced dipolar scattering

Despite a surge of interest in the nonlinear transport in 2D materials, a fundamental puzzle remains: existing theoretical frameworks are unable to quantitatively account for the giant nonlinear conductivities ($\gtrsim 1 \frac{\mu \text{m}}{\Omega \text{V}}$) recently reported in 2D van der Waals heterostructures. Here, we introduce a mechanism based on electron scattering from a substrate-induced dipole array linked to short-range impurities. We show that the strict kinematic constraints, inherent to 2D scattering, lead to a singular enhancement of the nonlinear response, fundamentally dictating a natural scale of $1 \frac{\mu \text{m}}{\Omega \text{V}}$.
Read the full abstract

Astrophysics of Galaxies

CO(7-6) and [C I](2-1) survey in z > 6 quasars

High-redshift ($z\gtrsim6$) quasars trace the earliest supermassive black holes and intense star formation, offering key laboratories for black hole-galaxy evolution at cosmic dawn. While far-infrared studies have revealed large dust reservoirs and strong [C II] emission, the physical conditions and molecular gas content of their ISM remain uncertain. We present ALMA Band 3 observations of the redshifted CO(7-6) and [C I](2-1) emission lines and dust continuum in a sample of 18 quasars at $z \sim 6$. We detected CO(7-6) in 15/18, [C I](2-1) in 6/18, and continuum in 13/18 sources. Line luminosities and continuum fluxes were used to estimate molecular gas masses from CO, [C I], and dust, and a hierarchical Bayesian cross-calibration of all four tracers yielded consistent per-source $M_{\rm H_2}$ estimates and conversion factors. Comparison with PDR and XDR model grids using the $L_{\rm [CII]}/L_{\rm [CI]}$ and $L_{\rm CO(7--6)}/L_{\rm TIR}$ ratios suggests gas densities of $n > 10^4$ cm$^{-3}$ and radiation fields of $G_0 \sim 10^3$–$10^4$ for sources consistent with PDR solutions, while many quasars fall outside the model parameter space. The $L'_{\rm CO(7-6)}/L'_{\rm [CI](2-1)}$ ratio indicates that a large fraction of the molecular gas resides in a warm and highly excited phase. Together these results suggest that classical PDR heating alone cannot explain the observed line ratios and that additional volumetric processes such as X-ray irradiation, turbulence and shocks, or enhanced cosmic-ray heating likely influence the excitation of the cold ISM. They demonstrate the power of multi-line diagnostics in revealing the excitation and structure of the cold ISM in early quasar host galaxies and highlight the need for joint analysis of CO, [C I], [C II], and dust emission to characterize star formation and AGN-driven heating at cosmic dawn.
Read the full abstract

All authors Fuxiang Xu, Roberto Decarli, Ran Wang, Anna Elisabetta Borea, Antonio Pensabene, Xiaohui Fan, Dominik Riechers, Eduardo Bañados, Axel Weiß, Michele Costa, Fabian Walter, Feige Wang, Jinyi Yang, Bram Venemans, Jianan Li, Emanuele Paolo Farina

High Energy Physics (Theory)

Fusion of Integrable Defects and the Defect $g$-Function

We study exact defect $g$-functions for integrable line defects in two-dimensional integrable quantum field theory and use them to probe defect fusion. We consider three settings: fusion of purely transmitting topological defects, fusion of non-topological defects with reflection and transmission, and fusion of a defect with an integrable boundary. For topological defects, the separated logarithmic $g$-function is additive, and the fusion limit is controlled by the multiplicative composition of transmission factors. For non-topological defects, separation-dependent phases in the Bethe-Yang equations produce oscillatory finite-size effects, while the fused defect is described by effective reflection and transmission amplitudes. In the Ising examples studied here, fusion involving non-topological defects lowers the finite localized contribution to the entropy, whereas topological defect-boundary fusion leaves it unchanged.
Read the full abstract