Peer Revenue Play credits. Real papers.

Papers

Fresh from arXiv, typeset properly. Highlighted words trade on the market.

Physics

Watch Physics (sign in to use)

Monday 18 May

High Energy Physics (Theory)

The Large Vector Multiplet and Gauging $(2,2)$ $\sigma$-models

The Large Vector Multiple (LVM) is the relevant gauge multiplet for gauging isometries acting on both the chiral and the twisted chiral fields in a $(2, 2)$ sigma model. Here we show that a recently proposed new gauge multiplet is a constrained or partially dualized version of the LVM. Gauging using this multiplet results in a $(2, 2)$ $\beta\gamma$ system interacting with a sigma model.
Read the full abstract

Chemical Physics

Enhanced Ionic Conductivity of confined Ionic-Liquid in Angstrom-scale 2D channels

Understanding ion-transport under molecular confinement is essential for developing next-generation energy technologies, where ionic motion often occurs within nanoscale or angstrom-scale channels. In this study, we use the model system of 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([EMIM]+[TFSI]-) confined within angstrom-scale slit-shaped 2D channels fabricated via van der Waals assembly to exemplify a broader class of confined ionic liquids.This system provides a well-defined platform to unravel generic features of ion transport under extreme confinement. By systematically varying the channel height h, we demonstrate a non-monotonic conductivity dependence on confinement, with a maximum 26.7 S/m at confining height, 1.02 nm, over 30 times of the bulk value for these ionic liquids. The variation of conductivity with confinement arises from structural rearrangements of ionic layers in the slit channel. Enhanced values of conductivity occur under confinements that promote the breakup of ion pairs and larger clusters, thereby increasing the number of free ions. Stronger confinement (h, 0.68 nm) also leads to steric hindrance, lowering conductivity below bulk values. Furthermore, introducing co-solvents with a higher dielectric constant and lower viscosity, such as acetonitrile (ACN), amplifies conductivity to ~145 S/m. Comparative studies using ACN, dimethyl carbonate and diethyl carbonate highlight that both large dielectric constant and low viscosity critically govern ion transport under confinement, as also supported by molecular dynamics simulations. Overall, this work establishes confined [EMIM]+[TFSI]- as a representative system for probing mechanisms of nano- and angstrom-scale ion transport, demonstrating how nanoconfinement and the solvent environment can be systematically tuned to manipulate ionic conductivity at the molecular level.
Read the full abstract

All authors Jing Yang, Raj Kumar Gogoi, Chen Ming, Louis A. Maduro, Abdulghani Ismail, Hiran Jyothilal, Kalluvadi Veetil Saurav, Rongrong Qi, Ravalika Sajja, Ashok Keerthi, Robert A. W. Dryfe, Alexei A Kornyshev, Boya Radha

Optics

Comparative study of second harmonic generation at 1030 nm in BiBO and LBO crystals using a 100 W-class picosecond laser

We present a systematic experimental comparison of single-pass second-harmonic generation (SHG) in bismuth triborate (BiBO) and lithium triborate (LBO) nonlinear crystals, driven by a 1.3 ps, 91 kHz laser at 1030 nm with up to 57 W of average input power. Both crystals yielded 32 W of second harmonic (SH) output at 515 nm, corresponding to a conversion efficiency of 56 %, which to the best of our knowledge represents the highest SH output power reported in the green spectral region using a BiBO crystal. Power dependence, long-term stability, beam quality, pulse duration, spectral properties, thermal effects, and angular acceptance bandwidth are characterized and directly compared for both crystals. These results provide quantitative performance benchmarks to guide the selection of nonlinear crystals for high-average-power, ultrashort-pulse frequency conversion near 1030 nm.
Read the full abstract

All authors Huzefa Aliasger, Šimon Šatra, Ondřej Novák, Jiří Mužík, Michal Jelínek, Martin Smrž, Tomáš Mocek

Accelerator Physics

Matching and Power Coupling

A key factor in any RF system is the mechanism for coupling the RF power from an amplifier into an accelerating cavity. Any tranmission line will experience reflections if there is a mismatch in the impedance between the line and its load. In accelerating cavities due to their high quality factors there is often a large mismatch between the cavity shunt impedance and the tranmission line. This lecture will look at how to overcome this mismatch and ensure efficient coupling without steady-state reflections in both standing-wave and travelling-wave cavties.
Read the full abstract

Quantum Physics

Realization of waveguide many-body quantum optics

Controlling light photon-by-photon is central to quantum optics. At a fundamental level, photon interactions are mediated by their coupling to atoms, and ultimate control requires deterministic light-matter interfacing of single photons to single atoms. Extending this paradigm to radiatively couple multiple individual atoms in a deterministic and scalable manner opens the arena of many-body quantum optics. Here, we realize such a setting by coherently coupling solid-state artificial atoms to a nanophotonic waveguide and demonstrate higher-order photon correlations that are controlled by the number of quantum emitters. We study the scaling of nonlinear photonic transport induced by emitter-photon scattering and demonstrate that adding a quantum emitter generates higher-order photon correlations. Specifically, we experimentally observe genuine three-photon correlations from a pair of collectively coupled emitters, while contributions from lower photon numbers are suppressed. In addition, we scale to three resonant quantum emitters coupled to the waveguide. These advancements demonstrate the onset of many-body quantum optics in waveguide quantum electrodynamics, enabling new photonic quantum simulators, the creation of many-body entangled states, and the exploration of novel quantum phase transitions.
Read the full abstract

All authors Lena M. Hansen, Clara Henke, Christoph Hotter, Oliver A. D. Sandberg, Thomas Wilkens Sandø, Vasiliki Angelopoulou, Alexey Tiranov, Christoffer B. Møller, Zhe Liu, Leonardo Midolo, Nikolai Bart, Arne Ludwig, Philip Walther, Cornelis J. van Diepen, Peter Lodahl, Anders Søndberg Sørensen

Strongly Correlated Electrons

Interlayer electronic coherence links magnetism and superconductivity in Ruddlesden-Popper nickelates

The extent to which electronic dimensionality influences magnetism and superconductivity in Ruddlesden-Popper (RP) nickelates remains unsettled. Here we report high-precision crystallographic-axis-resolved dc transport measurements on high-quality single crystals of bilayer and trilayer RP nickelates. Using a six-terminal geometry, we self-consistently determine the intrinsic in-plane ($\rho_\parallel$) and out-of-plane ($\rho_\bot$) resistivities on the same crystal, while minimizing uncertainties associated with current redistribution in highly anisotropic conductors. We uncover strong intrinsic electronic anisotropy in both bilayer and trilayer nickelates, in contrast to the weak anisotropy inferred from conventional four-probe measurements. Moreover, $\rho_\bot$ exhibits a nonmonotonic temperature dependence, revealing a universal coherent-to-incoherent crossover in interlayer transport. Across the RP nickelate series, the maximum superconducting transition temperature ($T_c$) observed under pressure is inversely correlated with the ambient-pressure resistivity anisotropy, suggesting that stronger interlayer electronic coherence is favorable for superconductivity. In addition, $\rho_\bot$ serves as an exceptionally sensitive and selective probe of magnetic and density-wave orders, exhibiting pronounced anomalies, whereas only weak signatures are observed in $\rho_\parallel$. Our results highlight interlayer coherence as a key organizing parameter that both tracks the relevant magnetic correlations and is closely tied to superconductivity, providing stringent constraints on microscopic theories of high-$T_c$ superconductivity in nickelates.
Read the full abstract

All authors Feiyang Liu, Lixing Chen, Enkang Zhang, Ying-Jie Zhang, Jun Zhao

Atmospheric and Oceanic Physics

Spontaneous Zonal Symmetry Breaking of Tropical Rain Belt

The intertropical convergence zone (ITCZ) is a central component of tropical climate, but the conditions under which a tropical rain belt remains zonally extended or becomes unstable to zonal organization are not well understood. We investigate this problem using idealized nonrotating kilometer-scale simulations forced by a prescribed sea surface temperature (SST) distribution that varies only in the meridional direction. This setup produces an ITCZ-like rain belt while allowing spontaneous zonal convective self-aggregation (ZCSA) to emerge. A parameter sweep shows that ZCSA occurs preferentially when both the peak SST and the meridional SST amplitude are large. ZCSA cases exhibit a temporary weakening of the meridional near-surface convergence. Boundary-layer momentum and thermodynamic analyses link this weakening to enhanced lower-tropospheric stability over the cool subsiding region, a shallower boundary layer, and stronger effective frictional damping of the meridional inflow. However, weak convergence alone is not sufficient for ZCSA. Aggregating cases also have a large meridional contrast in moist static energy forcing, implying a strong demand for meridional energy transport. Consistently, ZCSA reorganizes meridional moist static energy transport, including enhanced stationary eddy export from the warm region, and is accompanied by growing zonal moisture variability and weakening meridional moisture contrast. These results suggest that zonal symmetry breaking of an ITCZ-like rain belt is favored when weakened meridional inflow coincides with a large imposed meridional MSE-forcing contrast.
Read the full abstract

High Energy Physics (Phenomenology)

Quark and gluon tomography of the helium-4 nucleus

QCD collinear factorization allows coherent hard exclusive reactions to reveal the quark-gluon structure of light nuclei, enabling their 3D tomography. We study elastic form factors and deeply virtual Compton scattering on a helium-4 target, achieving theoretical precision unprecedented even in proton studies. Constraining generalized parton distributions at next-to-leading order in $\alpha_s$, incorporating kinematic twist corrections, and using full evolution equations, we provide the first tomography of a light nucleus, revealing distinct transverse spatial distributions of quarks and gluons.
Read the full abstract

All authors V. Martínez-Fernández, B. Pire, P. Sznajder, J. Wagner

Pattern Formation and Solitons

Formation of mechanical rogue waves

Rogue waves, characterized by their abrupt and extreme localization in space and time, have evolved from maritime folklore to subjects of intense study across diverse fields, from hydrodynamics and nonlinear optics to plasmas and condensed matter physics. In mechanical systems, however, experimental realization remains elusive despite theoretical and numerical predictions. This gap stems from the stringent requirements for controllable nonlinearity, the high-fidelity initialization of the system, and the necessity to overcome inherent energy dissipation. Here, we report the experimental formation of mechanical rogue waves in a precisely engineered one-dimensional metamaterial lattice with tailored nonlinearity and minimal dissipative losses. Using a precision electromagnetic release system, we prescribe initial strain profiles that trigger a transition from dispersive decay to extreme wave focusing. Our parametric analysis reveals that the emergence of these extreme events is strictly contingent upon a synergy between high nonlinearity and a broad spatial energy reservoir within the initial seed. Crucially, neither factor alone is sufficient to overcome dispersion and trigger the observed focusing. These findings establish a robust platform for studying transient nonlinear wave focusing phenomena in mechanical systems and offer insights for harnessing extreme wave localization for applications such as energy harvesting, waveguiding, and mechanical signal processing.
Read the full abstract

All authors Yasuhiro Miyazawa, Christopher Chong, Panayotis G. Kevrekidis, Jinkyu Yang

High Energy Physics (Theory)

Monodromy of Calabi-Yau threefold flops via grade restriction rule and their quantum Kahler moduli

We present exact expressions, based on the grade restriction rule and window categories, for monodromies associated to certain Calabi-Yau threefold flops. We show a general formula for the monodromy action on the lattice of B-brane charges, based on the hemisphere partition function for abelian and nonabelian gauged linear sigma models. We exploit the explicit form of the discriminant in the quantum Kähler moduli to further refine the form of the monodromies, in several examples, using their relation to the fundamental group of nested torus links.
Read the full abstract

High Energy Astrophysical Phenomena

A 4200-hour HyperFlash and ÉCLAT campaign on the hyperactive FRB 20240114A: constraining energetics with the most brilliant bursts

Hyperactive repeaters provide a unique window into the evolving environments and energy budgets of fast radio burst (FRB) sources, though they may not be representative of the FRB population in general. High-cadence observations are key to capturing the rarest and most energetic bursts, which occur only once per hundreds to thousands of hours. Here we present an unprecedented $4{,}200$-hour observing campaign targeting FRB 20240114A as part of the HyperFlash and ÉCLAT FRB monitoring programs. Over $806$ days, we detected $178$ high-energy ($\sim$$10^{40-42}$ erg) bursts with HyperFlash, which together amount to $4.4 \times 10^{42}$ erg of released radio energy (assuming isotropic emission and 1-GHz emission bandwidth). The cumulative energy of the HyperFlash bursts is about twice that of $\sim$$11{,}000$ lower-energy bursts detected with FAST, emphasising the significant role that the highest-energy bursts play in depleting the central engine's stored energy. In fact, the single most brilliant burst from our sample, which we term the STROOP, contributes roughly $1/3$ of all the energy we measure, and is at the maximum energy seen in studies of both repeating and apparently one-off FRBs alike. We also find a break in the burst energy distribution at $\sim$$2\times10^{40}$ erg and a linear dispersion measure (DM) increase of $+0.96 \pm 0.06$ pc cm$^{-3}$ over a period of $318$ days. We discuss these findings in the context of a magnetar source model and highlight comparisons with the energetics of intermediate and giant X-ray/$\gamma$-ray flares from Galactic sources.
Read the full abstract

All authors O.S. Ould-Boukattine, A.J. Cooper, A.M. Cook, J.W.T. Hessels, D.M. Hewitt, J. Huang, I. Cognard, T.J. Dijkema, M.P. Gawroński, W. Herrmann, F. Kirsten, A. Moroianu, Z. Pleunis, W. Puchalska, S. Ranguin, M.P. Snelders, T. Telkamp

Materials Science · Cross-listed from cs.AI

A Practical Noise2Noise Denoising Pipeline for High-Throughput Raman Spectroscopy

A lightweight and reproducible denoising pipeline for high-throughput Raman spectroscopy is presented. The approach relies on a one-dimensional convolutional autoencoder trained using a Noise2Noise strategy, requiring neither external spectral libraries nor high signal-to-noise reference spectra for training. From a reduced training subset composed of repeated short-exposure acquisitions, the model learns to reconstruct Raman spectra while efficiently suppressing stochastic noise. The method is evaluated on a heterogeneous mineral sample, using both quantitative spectral fidelity metrics (RMSE, SNR, SSIM) and task-oriented criteria based on unsupervised K-means classification. Results demonstrate that integration times as short as 5 ms per spectrum, which are typically insufficient for reliable interpretation, yield denoised spectra with high fidelity to the reference data while preserving chemically coherent maps. This work provides a practical trade-off between spectral quality and acquisition speed, enabling fast, adaptable Raman workflows compatible with routine laboratory use. It also offers a transferable framework for other one-dimensional spectroscopic modalities.
Read the full abstract

All authors David Martin-Calle, Cesar Alvarez Llamas, Vincent Motto- Ros, Christophe Dujardin, Jérémie Margueritat, David Rodney

Mesoscale and Nanoscale Physics

Probing Dielectric Screening in van der Waals Heterostructures via Pressure-Tuned Exciton Rydberg Series

Excitons in two-dimensional semiconductors are directly exposed to the environment and are sensitive to the dielectric properties of their surrounding. Here, we show that the Rydberg series of excited states of excitons in a monolayer WSe$_2$ encapsulated in hexagonal boron nitride (hBN) can be used to probe the pressure-induced modifications of the surrounding dielectric properties. We propose a model based on the pressure induced evolution of the interlayer distances in this van der Waals heterostructure and on the bulk dielectric properties of hBN. This approach allows a direct measurement of the dielectric constant of pressurized hBN and establishes a new methodology for dielectric sensing.
Read the full abstract

All authors Shalini Badola, Adlen Smiri, Thomas Pelini, Aditi Moghe, Tristan Riccardi, Amit Pawbake, Kenji Watanabe, Takashi Taniguchi, Iann C. gerber, Clement Faugeras

Quantum Physics

Quantum Emitters at Telecommunication Wavelengths based on Carbon Defects in Transition Metal Dichalcogenides

Low-dimensional materials have emerged as promising hosts for quantum emitters, whose emission typically arises from either strain-induced band bending or defect-induced two-level systems. Among these materials, transition metal dichalcogenide (TMD) monolayers have attracted particular attention; however, their performance is limited by strong photoluminescence (PL) quenching at room temperature. As TMDs transition from a direct to an indirect bandgap when moving from monolayers to multilayers, we herein propose a strategy to overcome this quenching limitation by exploiting the indirect bandgap of TMD bilayers in combination with a point defect doping. The indirect gap suppresses excitonic PL, while specific defects enable robust defect-mediated quantum emission. Using hybrid-functional density functional theory, we investigate substitutional carbon defects at chalcogen sites (S and Se) in WS2, WSe2, MoS2, and MoSe2 bilayers and comprehensively characterize their optical properties. Both neutral and singly negative charge states are found to be thermodynamically stable. Neutral defects exhibit singlet configurations with emission in the O- and C-band telecommunication windows, whereas negatively charged defects adopt doublet configurations featuring spin-selective transitions and near-infrared emission. The electron-phonon coupling strength, radiative lifetime, and dipole orientation are found to depend sensitively on both the host material and defect site, providing distinct fingerprints for experimental identification. Our findings, therefore, establish carbon-doped TMD bilayers as promising platforms for room-temperature defect-based quantum emitters operating at telecommunication wavelengths.
Read the full abstract

Instrumentation and Methods for Astrophysics

Datacubes of H$\alpha$, CaII K, CaII H and H$\epsilon$ line profiles of the full solar disk recorded daily at Meudon observatory since 2017 and some typical profiles of solar features

Systematic observations of the Sun are performed at Meudon observatory since 1908 under the form of monochromatic images. However, a major technical improvement occurred in 2017; since this date, spectroscopic datacubes are obtained daily with the spectroheliograph and a fast CCD camera. Line profiles of H$\alpha$ (6562.8 A), CaII K (3933.7 A), CaII H (3968.5 A) and H$\epsilon$ (3970.1 A in the wing of CaII H) are recorded over the full solar disk under the form of 3D FITS files (x, y, $\lambda$). The optical spectral resolution is 0.15 A for Calcium and H$\epsilon$ (0.093 A/pixel), and 0.25 A for H$\alpha$ (0.155 A/pixel); the spatial sampling is about 1 arc sec (the usual seeing is 2 arcsec). Datacubes are freely available since July 2017 in raw TIF (level 0) or processed FITS (level 1) format. Access to observations and typical line profiles associated to solar features are presented.
Read the full abstract

Classical Physics

Bayesian characterization of porous media using three-microphone tube method in extended frequency ranges

The characteristic impedance and the propagation coefficient are among the most important parameters for evaluating the acoustic performance of porous materials. This work investigates the influence of cylindrical modes in an impermeable tube and applies multiple microphones distributed along the tube circumference within the three-microphone framework to extend the valid frequency range of characteristic impedance measurement. During the extended broadband measurements, discontinuities or phase jumps are observed in the experimentally measured propagation coefficient of the porous material under test. A Bayesian inference is applied in a sequential manner to estimate the unwrapped propagation coefficient and characteristic impedance. The results demonstrate that the inferred parameters accurately capture the behavior of the transfer function, allowing accurate parameter estimation.
Read the full abstract

Quantum Physics

Quantum magic of strongly correlated fermions $-$ the Hubbard dimer

We study the non-stabilizerness (quantum magic) content of the Hubbard dimer, an analytically solvable, yet completely non-trivial, model of strongly correlated fermions. We consider zero- and finite-temperature properties as well as the time evolution after a quantum quench drives the system out of equilibrium. We evaluate local and nonlocal non-stabilizerness using both the robustness of magic and the stabilizer Renyi entropy, demonstrating how the latter often fails in detecting the mixed stabilizer states that are typically found in this kind of systems. Finally, we compare the non-stabilizerness with other genuine resources of quantum-state complexity, i.e., the fermionic non-Gaussianity and the superselected two-site entanglement. Our findings corroborate the role of non-stabilizerness as a fundamental quantum resource, capturing aspects of quantum complexity that elude traditional information-theoretic measures and providing a novel perspective on fermionic systems with tunable interactions.
Read the full abstract

Materials Science

Termination-Preserved Ultra-high Tunneling Magnetoresistance in Altermagnetic KV2Se2O

Altermagnets exhibit nonrelativistic spin splitting without net magnetization, establishing a new platform for next-generation spintronic devices. Although altermagnetic tunnel junctions (AMTJs) represent the most promising realizations, their practical applications are hindered by low tunnel magnetoresistance (TMR) ratios and strong sensitivity to interfacial configurations. Here, we systematically explore the transport properties and microscopic mechanisms of AMTJs based on the recently discovered d-wave altermagnet KV2Se2O. Using first-principles calculations and orbital-resolved analysis, we demonstrate that the synergy between compressed nodal-point like spin-degenerate channels and coplanar interfacial magnetic order yields an ultra-high intrinsic TMR above 105% for all interfacial terminations. More importantly, K-termination effectively preserves bulk spin polarization through its unique passivation characteristics, leading to an ultra-high TMR up to 1012%. These results identify the coupling between momentum-space topology and interfacial passivation provides a reliable strategy for realizing giant magnetoresistive responses in altermagnetic spintronic devices.
Read the full abstract

All authors Junnan Guo, Himanshu Mavani, Wenhui Fang, Jifeng Tang, Wenhao Li, Weikang Wu, Hui Li, Evgeny Y. Tsymbal, Lishu Zhang

Computational Physics

Simulation of S-parameters of general multilayer boxed PCBs with the method of moments and the scattering matrix algorithm

Printed circuit board (PCB) modelling is an important part of the PCB production process, in which the designer aims to optimize the desired output characteristics prior to physical PCB manufacturing. Due to the specific shape of PCBs, namely, thin and highly conductive components enclosed within a relatively simply shaped dielectric host, the PCB modelling problem is amenable to solution by the so-called 2.5D Method of Moments (MoM) applied to the integral equation solution of Maxwell's equations. For this purpose, an analytic expression for the Green's function of the host medium needs to be derived. Many studies exist in which expressions are derived for the transverse Green's function components in a waveguide, used for modelling planar metallization layers in shielded layered media. Works containing the full Green's function that allows modelling of both longitudinal and transverse currents are much fewer. In this study, we propose a tool to solve the shielded PCB modelling problem involving both transverse and longitudinal currents, with the Green's function in a layered waveguide derived using the S-matrix formalism. Our approach combines a straightforward, intuitive way of calculating the complete dyadic Green's function in a layered waveguide with the inherent numerical stability of the S-matrix method. The Green's function is expressed in terms of three sets of S-matrices associated with the PCB layers in which the electric current source and the electric field observation point are located. The MoM is implemented using surface rooftop, volume pulse, and linear basis functions, for which we provide the overlap integrals, to model planar metallization layers and wire-like vertical interconnects. The validity of the method is demonstrated on two numerical examples. The method can be extended to other bases to model objects of various shapes.
Read the full abstract

All authors A. O. Makarenko, P. Zheglova, R. Gaponenko, R. V. Salimov, R. I. Tikhonov, A. A. Shcherbakov

Computational Physics

SPARC-atomSFE: Spectral finite-element package for atomic structure calculations in density functional theory

We present SPARC-atomSFE, a spectral finite-element package for accurate and efficient atomic structure calculations within the framework of Kohn-Sham density functional theory. The package supports both all-electron and norm conserving pseudopotential calculations across a comprehensive hierarchy of exchange-correlation approximations, spanning local, semilocal, and nonlocal functionals. The latter includes hybrid functionals and the many-body random phase approximation, for which we implement both the generalized Kohn-Sham approach and the optimized effective potential (OEP) method, with OEP necessary for eigenvalue-dependent functionals. Spatial discretization is based on an adaptive grid with element nodes distributed according to the Legendre–Gauss–Lobatto scheme, high-order $C^{0}$-continuous Lagrange polynomial basis functions, and Gauss–Legendre quadrature for numerical integration. We present systematic convergence studies and identify the computational parameters required to achieve target accuracies. We validate the accuracy of SPARC-atomSFE through representative calculations spanning the various exchange-correlations approximations, obtaining results that generally agree with values in the literature to within $1~\mu\text{Ha}$ or better.
Read the full abstract

Quantum Physics

A geometric Fano–Procrustes framework for purification-based distances and quantum channels analysis

In this work we reformulate the Uhlmann purification-overlap optimization and develop a purification-based geometric framework for the analysis of mixed qubit states and qubit channels. Using the Fano representation of two-qubit pure states, a purification is described in terms of the Bloch vector of the system, the ancilla Bloch vector, and a real correlation matrix. For a fixed one-qubit mixed state, the freedom in the choice of purification can be parametrized by proper rotations acting on the ancillary degrees of freedom. As a result, the optimization over purifications entering the definition of the metric \(D_N\) introduced in Ref.~\cite{Lamberti2009} is reduced to an orthogonal Procrustes problem on the Lie group \(SO(3)\). This reduction yields not only the maximal purification overlap, but also the optimal rotation relating the purification frames. From this rotation we define a purification misalignment angle \(\Theta\), which provides geometric information not contained in scalar fidelity-based distinguishability measures. The formalism is applied to representative qubit channels, including depolarizing, bit-flip, phase-flip, amplitude-damping channels, and an imperfect quantum NOT gate. For symmetry-adapted evolutions preserving the Bloch-vector direction, the optimal rotation is trivial and \(\Theta=0\), whereas noncollinear channel actions generate a nonzero misalignment. The pair \((D_N,\Theta)\) therefore separates the magnitude of the maximal purification overlap from the geometric reorientation of the optimal purification frames. Since the optimal Procrustes rotation can be lifted to a local unitary acting on the ancilla, the construction also provides an operational interpretation of the optimal purification in terms of an ancilla-side transformation.
Read the full abstract

Materials Science

Spatially-Localized Second Harmonic Generation via Spin Wave Concentration in Patterned YIG Structures

The anisotropic dispersion and inherent nonlinearity of magnetostatic spin waves in thin films and confined structures provide unique opportunities for implementation in next-generation magnonic devices for data and signal processing. A particular challenge is to establish an effective means to locally generate higher harmonics and subsequently exploit them while avoiding extraneous nonlinear losses. Here we demonstrate that deterministically and locally tuning the dispersion relation by geometric confinement through standard patterning processes, allows the creation spatially localized, high-intensity magnons hundreds of $\mu m$ or even further from the excitation source. The local intensity obtained in passive, lithographically patterned YIG funnel structures is sufficient to achieve second harmonic generation in localized regions via conventional magnon scattering processes. We verify these effects are truly nonlinear processes by direct measurement and comparison of the 1-$\omega$ and 2-$\omega$ magnon signals as determined by highly sensitive frequency- and spatially-resolved SNS-MOKE technique. This lays the foundation for using similar devices in future magnon-based infrastructures to localize and enhance sensitivity of readout, downstream magnon-based logic operations, and for other higher harmonic generation-related phenomena and low-power magnonics applications.
Read the full abstract

All authors Stephanie R. Lake, Marc Eger, Philipp Geyer, Rouven Dreyer, Seth W. Kurfman, Georg Schmidt

Mesoscale and Nanoscale Physics

Spin-caloritronic signatures of soft magnons in bilayer CrSBr

Spin transport in magnetic insulators is often treated by assuming that magnons carry a fixed spin angular momentum of $\hbar$, which does not hold in general, however. Here we calculate the magnon spin angular momentum of a layered antiferromagnet as a function of applied magnetic field and wave vector. We show that the triaxial anisotropy and intralayer dipolar interactions in bilayer CrSBr renormalize the magnon spin angular momentum, which diverges upon field-induced magnon softening. This divergence gives rise to a pronounced peak in the thermal spin Seebeck response and provides a clear spin-caloritronic signature of soft magnons.
Read the full abstract

All authors Rob den Teuling, Ping Tang, Gerrit E. W. Bauer, Yaroslav M. Blanter

Atmospheric and Oceanic Physics

Global kilometre-scale tropical cyclone inner-core vector winds from sparse scalar CYGNSS observations

Tropical cyclone (TC) inner-core surface wind vectors underpin intensity forecasting and storm-surge prediction, yet direct observations remain scarce: routine aircraft reconnaissance is confined to the North Atlantic and Eastern Pacific and, even there, samples each storm only episodically. CYGNSS is the only satellite that penetrates heavy precipitation to measure inner-core surface winds, but delivers directionless scalar wind speeds and is assimilated by no operational analysis system. Here we show that the full 10 m vector wind field inside the TC inner core can be reconstructed globally at 1.5 km resolution from sparse CYGNSS scalar observations alone, by generalising score-based diffusion assimilation to a nonlinear observation operator and injecting three TC boundary-layer constraints; we further propose a CYGNSS-intrinsic Observation Coverage Sufficiency (OCS) criterion that flags reliable reconstructions without external references. Applied to 4,955 snapshots of 249 TCs across all six active basins (2020-2022), the reconstructions reduce systematic Vmax bias against IBTrACS best-track by ~79% and ~75% relative to ERA5 and CCMP. Independent Tail Doppler Radar validation (47 storms) yields a wind speed RMSE of 6.9 m/s on the 23 coverage-sufficient cases (7.5 m/s overall); ablation across the full sample shows that the physical constraints cut wind-direction RMSE by 60% without degrading speed accuracy. The framework further supports joint assimilation of heterogeneous observations: adding only 11 dropsonde vectors to CYGNSS for TC FIONA (2022) reduces the cross-eye profile RMSE by 42%, outlining a practical pathway for fusing CYGNSS with SFMR, SAR and scatterometer data. The result is a globally consistent, observation-anchored kilometre-scale description of TC inner-core vector winds across all six active basins, including those without routine aircraft reconnaissance.
Read the full abstract

All authors Xinhai Han, Xiaohui Li, Jingsong Yang, Zeyi Niu, Guoqi Han, Jiuke Wang, Wei Huang, Yunxia Zheng, Hanyue Ni, Yiqi Wang, Wei Tao, Lotfi Aouf, Shaoliang Peng, Dake Chen

Soft Condensed Matter

Accelerating charging dynamics of electric double-layer capacitors

Electric double-layer capacitors (EDLCs), consisting of an ionic fluid between two metallic electrodes, are electrochemical energy storage devices complementary to batteries, allowing for a faster charge/discharge. The charging dynamics in response to a voltage step features a variety of regimes and relaxation timescales, depending on the applied voltage and the various lengths characterizing the system, most importantly the inter-electrode distance and the Debye length over which electrostatic effects are screened in the electrolyte. Inspired by recent works on "shortcut to adiabaticity" in colloidal systems, here we investigate the possibility to control the charge and discharge of planar EDLCs using time-dependent voltages. Specifically, our aim is to achieve a full charge or discharge within a finite time shorter than their intrinsic relaxation timescales. Within the Poisson-Nernst-Planck model and the small-voltage regime, we derive time-dependent protocols that can eliminate an arbitrary number of relaxation modes. This permits to approach the equilibrium charged state within a finite time, that can be in practice an order of magnitude faster than the natural equilibration time. We illustrate the relevance and efficacy of the method on polynomial drivings and show that the surface charge density, charge-density profiles, and global deviation from equilibrium (quantified by a Kullback-Leibler-like divergence) can all be significantly accelerated, even for driving times comparable to or shorter than the natural RC time of the system.
Read the full abstract

All authors Megh Dutta, Ivan Palaia, Emmanuel Trizac, Benjamin Rotenberg

Cosmology and Nongalactic Astrophysics

(An)Isotropy in Pantheon+ and Type Ia supernova samples: intrinsic limits of directional tests

The use of methods that investigate the value of the Hubble constant H$_0$ in different patches (60 $ or 90$^ size) across the sky to probe the statistical isotropy of the Universe using large SNe Ia databases has led to contradictory claims of either anisotropy or isotropy. The anisotropy directions vary amongst research works. The objective of this paper is to clarify the abovementioned claims and study the lack of basis for depicting directions of anisotropy with the present SNe Ia samples. We explain the type of limitation embedded in the SN Ia lightcurve method to determine the isotropy of H_0 and the corresponding consequences. The widely used analysis through the Region Fitting and the Hemisphere Comparison methods is done here using the Pantheon+ database, simulating 2000 distinct directions in the sky within a Bayesian Markov Chain Monte Carlo approach. We also study a smaller SNe Ia database, the Carnegie Supernova Project sample, leading to a similar kind of result as that from the Pantheon+ sample. We investigate the validity of the directions found for anisotropy within these analyses. We have found that within the tests used here, the Region Fitting method and the Hemisphere Comparison method, one can not determine with robustness the direction of an anisotropy of H$_0$ using the present SNe Ia large data samples. This is intrinsic to the way H$_0$ is obtained with the SN Ia lightcurve method. Achieving robust constraints will require a quite uniform sky coverage from larger SNe Ia samples with improved systematics.
Read the full abstract

Chemical Physics

Design Principles for Singlet Fission in Aza-BODIPY Dimers: Spacer-Controlled Electronic Structure and Energy Ordering

In this work, we investigate the role of spacers in tuning singlet-fission (SF) activity in aza-BODIPY dimers using a diabatic electronic-structure framework. A series of nine spacer-linked dimers is analyzed employing high-level multireference methods to evaluate the energetics and couplings of the locally excited (LE), charge-transfer (CT), and multiexcitonic (ME) states. The introduction of spacers reduces excessive state mixing that was observed in C-C bonded aza-BODIPY dimers and promotes the emergence of more distinct ME states, while preserving the CT-mediated interactions required for efficient SF. Furthermore, the substitution pattern, degree of conjugation, and introduction of acetylene units strongly modulate the relative state energetics and effective couplings, thereby tuning the SF rate over several orders of magnitude. These findings establish clear structure–property relationships and provide molecular design guidelines for optimizing SF activity in aza-BODIPY-based chromophores.
Read the full abstract

Strongly Correlated Electrons

Frustration from Localized Zhang-Rice States: A Unified Theory of Doping-Driven Magnetic Transitions in Cuprates

The microscopic mechanism by which doped holes disrupt the antiferromagnetic (AFM) order is one of the fundamental questions in cuprates. In this work, we propose a unified microscopic theory in which doped holes form spatially localized Zhang-Rice singlets which actively mediate emergent spin exchange. Rather than acting as simple non-magnetic vacancies, these localized states introduce emergent next-nearest $J_2$ and third-nearest $J_3$ neighbor superexchanges. This dopant-induced exchange pathway generates significant magnetic frustration, naturally explaining the rapid collapse of the Néel AFM order and the emergence of a spin-glass phase on the hole-doped side. In contrast, electron doping primarily leads to spin dilution, allowing AFM order to persist to substantially higher doping levels, consistent with the experimentally observed electron-hole asymmetry. Our findings provide a unified microscopic framework for understanding doping-driven magnetic transitions in lightly doped cuprates.
Read the full abstract

All authors Xiaodong Wang, Ping Xu, Jiong Mei, Shao-Hang Shi, Zi-Xiang Li, Mingpu Qin, Kun Jiang, Hui-Ke Jin

Atomic Physics

Enhanced detection of electric field signals via squeezing-induced stochastic resonance

Stochastic resonance (SR) could amplify weak electric-field signals in nonlinear systems by means of the externally injected noises. Here we propose and experimentally demonstrate a modified SR method, termed squeezing-induced SR, implemented in the system involving a trapped ion behaving as a Duffing oscillator. We find that squeezing the phase noise of the oscillator results in amplified fluctuation of the corresponding amplitude, which helps achieve the SR. Since no auxiliary noise source is needed, the squeezing-induced SR may enhance the signal-to-noise ratio by 4.28 $\pm$ 0.39 dB compared to the conventional noise-induced SR under identical conditions of the electric-field detection. This technique offers a promising approach for developing atomic ion sensors for detecting weak electric-field signals.
Read the full abstract

All authors Ya-Qi Wei, Tai-Hao Cui, Quan Yuan, Pei-Dong Li, Yuan-Zhang Dong, Zhuo-Zhu Wu, Ji Li, Jia-Wei Wang, Fei Zhou, Ming-Xiao Li, Liang Chen, Zhu-Jun Zheng, Mang Feng

Mathematical Physics · Cross-listed from math.QA

The balanced structure on the category of representations of a conformal net

Let $\mathcal{A}$ be a (not necessarily rational) conformal net. We show that the braided $\mathrm{W}^*$-tensor category $\text{Rep}(\mathcal{A})$ of representations of $\mathcal{A}$ is canonically a balanced $\mathrm{W}^*$-tensor category. The balance is given by the action of $e^{-2\pi i L_0}$, where $L_0$ denotes the generator of rotations on $S^1$. In arXiv:2606.03623, we generalize this result to the larger context of a group acting on $\mathcal{A}$. We provide here a more accessible proof for the case where no group is present.
Read the full abstract