Superconductivity
Papers
Fresh from arXiv, typeset properly. Highlighted words trade on the market.
Monday 13 April
An antidot-pinned vortex in a three-dimensional topological insulator-superconductor platform hosts a Majorana zero mode (MZM). However, numerous Caroli-de Gennes-Matricon (CdGM) states coexist with it. We develop a general theory to study the effects of disorder on the system, emphasizing the difference between Majorana zero mode and CdGM states. Using both an analytical random matrix theory approach and numerical simulations, we derive the statistical distributions of these states. Our results demonstrate that the variance of the MZM probability density is twice that of the CdGM states, a difference due to the former having a real wave function as opposed to a complex one. This distinction can be measured by using scanning tunneling microscopy in a disordered antidot vortex, providing a signature of MZM beyond the zero-bias conductance peak.
Mesoscale and Nanoscale Physics
Geometry-controlled magnon-polaritons of double magnetic films in planar cavities
Planar cavity magnonics has been developed mainly for a single magnetic film, leaving multilayer behavior in spatially resolved cavity scattering largely unexplored. Here, we introduce a double layer planar cavity with two magnetic films embedded in the same microwave cavity to derive a full two-film scattering theory in the macrospin ($J = 0$) limit and recover the exact zero-gap half-thickness limit, thereby benchmarking the model against the known one-film result. We find that the double layer model actively enables geometry-controlled bright-channel enhancement, demonstrating that the magnon-photon coupling depends on spatial placement rather than just total magnetic volume. Antinode-compatible placements increase the coupling, while node-compatible placements suppress it. Weak symmetry breaking also transfers finite cavity weight to a mode dark in the symmetric limit, producing an additional branch without destroying the main avoided crossing. Finally, a reduced multimode theory for $J\neq 0$ predicts family-resolved bright and dark channels for odd standing-spin-wave modes.
Read the full abstract
Quantum Physics
Frustration-Induced Expressibility Limitations in Variational Quantum Algorithms
Geometric frustration, arising from competing interactions that prevent simultaneous energy minimization, presents a fundamental challenge for variational quantum algorithms applied to quantum many-body systems. We investigate the transverse-field Ising model on a square lattice with frustrated diagonal coupling and show that geometric frustration leads to strongly inhomogeneous correlations that are difficult to capture using standard Hamiltonian-inspired ansätze with global parameters. As a result, the required circuit depth increases significantly in the intermediate-field regime. We demonstrate that this limitation is not caused by optimization difficulties such as barren plateaus, but instead arises from insufficient expressibility of the ansatz. By introducing bond-resolved variational parameters, we recover accurate results at reduced circuit depth. We also study low-energy excitations and find that near-degenerate spectra in the frustrated regime further challenge variational methods. Our results provide a clear physical explanation for the limitations of variational quantum algorithms in frustrated systems and suggest improved ansatz design strategies for quantum simulation.
Read the full abstract
Plasma Physics
Gyrokinetic equilibria of high temperature superconducting magnetic mirrors
High-temperature superconducting (HTS) magnets and other advances have led to renewed interest in magnetic mirrors for fusion energy. The non-Maxwellian nature of mirror plasmas necessitates kinetic modeling to predict, optimize and design mirrors. Explicit gyrokinetic full-f codes can be used to study instabilities and turbulent transport in tokamaks and mirrors, but they have been prohibitively expensive to integrate directly over the very long time scales required to compute kinetic plasma equilibrium. We demonstrate that these studies are now feasible thanks to novel multiscale methods delivering a 30,000X speed-up. The resulting kinetic equilibrium, electrostatic potential, and ion confinement time are consistent with analytic theory. This transformative capability opens the door to a new way of obtaining equilibria for mirrors, and we discuss how this technique may also accelerate calculations for tokamaks and stellarators. The models presented in this article address critical multiscale problems in modeling magnetic mirrors, opening a new research avenue for equilibrium studies using an explicit continuum gyrokinetic code.
Read the full abstract
Optics
Anisotropic photonic time interfaces via isotropic spacetime modulations
The engineering of the optical properties of materials in space and time is opening further directions and possibilities to control wave propagation in four dimensions (x,y,z,t). A key example of such modulations are time interfaces where the permittivity of the medium is changed in time from isotropic to another isotropic value. Recently, isotropic-to-anisotropic time interfaces in a homogeneous, unbounded medium have also been proposed, demonstrating their potential for redirecting waves in real time. However, the challenge relies on accessing/creating permittivity tensors in time. To address this, here we propose isotropic-to-isotropic spacetime modulations inspired by spacetime effective media to emulate such isotropic-to-anisotropic time interfaces. Specifically, we consider that subwavelength spatially periodic multilayers, arranged either horizontally or vertically, are created in time using simultaneous isotropic-to-isotropic time interfaces applied in discrete spatial regions. The theory behind this approach is presented in detail demonstrating that, indeed, it is possible to change the direction of energy propagation in real time and emulate permittivity tensors. All the results are supported by numerical simulations, demonstrating the potential of the proposed spacetime approach to emulate photonics isotropic-to-anisotropic time interfaces.
Read the full abstract
Mathematical Physics · Cross-listed from math.PR
Semilocalization for inhomogeneous random graphs
We analyse the eigenvectors of the adjacency matrix of a random inhomogeneous graph constructed from a specified degree sequence. We assume that the empirical degree sequence has bounded mean and variance. We show that near the edges of the spectrum, the eigenvectors are semilocalized in the sense that their mass concentrates around a small set of resonant vertices. For the extremal eigenvalues, we establish localization around a single vertex. In order to obtain effective estimates in the presence of highly inhomogeneous degrees, we introduce a new economical pruning procedure that carefully extracts a forest from the original graph, whose adjacency matrix is compared to that of the original graph using a suitably constructed local coupling to random trees with independent edges.
Read the full abstract
Soft Condensed Matter
Kinematic and rheological equivalence of steady shearing and planar extensional flows
Steady shearing and planar extension are commonly viewed as two distinct types of flow field, especially in the context of probing the rheology of complex fluids. By leveraging the kinematic equivalence between the two flows, we derive an effective extension rate experienced by a material element which removes the rotational component of the shearing flow. This enables reconstruction of the steady planar extensional viscosity of an unknown fluid using only material functions measured in a steady shearing flow, revealing a deep rheological equivalence between the two deformation histories. We demonstrate this equivalency through phenomenological and microscopically motivated frame-invariant constitutive models as well as using experimental data obtained with a viscoelastic polymer solution and a polymer melt.
Read the full abstract
Astrophysics of Galaxies
Do little red dots really form a distinct class of astronomical objects?
JWST observations have identified a class of enigmatic sources known as little red dots (LRDs), interpreted as a distinct class of active galactic nuclei (AGNs) and host galaxies, whose black hole masses, AGN emissivities, stellar masses, and possible quasi-stars or black hole stars (BH*) suggest a previously unidentified class of extragalactic objects. However, two questions remain: is there a clear discontinuity between LRDs and field galaxies at the same epochs, and do LRDs form a homogeneous population? We address these issues with a continuous metric of the "LRDness" of galaxies, measuring their compactness (delta_compact), the sharpness of the V-shaped spectral energy distribution (delta_v-shape), and the strength of the broad Balmer emission. This approach, which avoids a binary "on-off" view, was applied to 48,000 (5,000) galaxies with photometric (spectroscopic) data over 750 arcmin^2. V-shape prominence correlates strongly with morphology, with no clear transition at the usual LRD threshold: the compact fraction rises with V-shape intensity. Similarly, broad H-alpha strength increases with V-shape sharpness and compactness. The [N II] deficit is not exclusive to LRDs, but a global property of compact, metal-poor galaxies. Only a minority of LRDs (the 3% most extreme) show a prominent Balmer break (greater than 3) of potentially non-stellar origin. LRDs and non-LRDs follow a similar Balmer decrement versus V-shape trend, suggesting a common origin consistent with dust attenuation, reinforced by the agreement between observed Balmer ratios and attenuated Case B predictions. The inferred dust mass (4-7 x 10^4 M_sun) is low enough to explain ALMA non-detections. We conclude that most LRDs are not a separate class, but rather the extreme tail of a continuous distribution of galaxies and broad H-alpha emitters, consistent with a classical broad-line region and dust component.
Read the full abstract
High Energy Physics (Experiment)
Implementation and commissioning of an experimental system towards sub-eV axion-like particle searches with 0.1 PW laser at ELI-NP
We have developed and commissioned an experimental system at ELI-NP towards searches for axion-like particles (ALPs) in the worldwide 10~PW-class laser facility. The search principle is based on the Four-Wave Mixing (FWM) process at a focal region of coaxially combined two laser beams. The subsystems to control vacuum pressure, area size, spatiotemporal overlap and trigger-event pattern, are integrated into the experimental area for 0.1 PW laser output at ELI-NP. The integrated system is dedicated to identifying the possible background sources originated from the residual atoms and the optical elements. The performance and functionality of the subsystems were validated through the evaluations of laser characteristics, their stability and the FWM signal detections. Furthermore commissioning results for the background studies were demonstrated with 20 mJ-level laser pulses at the vacuum pressure of $1.3 \times 10^{-7}$ mbar. In conclusion, the integrated experimental system is fully functional as designed and provides a suitable platform for the background studies towards the ALP searches, enabling a stepwise scale-up of the laser pulse energies from 20 mJ to the maximum energy of 2.5 J in the 0.1 PW experimental area.
Read the full abstract
Materials Science
Hybrid functional calculation of electrical activity and complexing mechanism of Cu-related defects
Copper is a detrimental impurity in silicon with high diffusivity and a high tendency to precipitate. Interaction between Cu and other defects is essential for understanding the nature of Cu precipitation in silicon. Despite extensive experimental investigations of Cu-related defects in silicon, a comprehensive understanding remains elusive due to limitations of techniques in resolving defect configurations, as well as inconsistencies between theoretical and experimental results regarding transition levels. Moreover, the underlying formation mechanism of the well-known $\mathrm{Cu_{PL}}$ line is still unclear. In this work, configurations, formation energies, and transition levels of Cu-related defects in silicon are calculated using the HSE06 functional and finite-size correction. Defects involved in this study include $\mathrm{Cu_i}$, $\mathrm{Cu_{Si}}$, Cu-B, Cu-P, and Cu-H. A $\mathrm{Cu_{i4}V}$ model is proposed to explain the discrepancies between theory and experiment about $\mathrm{Cu_{PL}}$ defect. Our calculations may provide insight into the electrically active defects and the early states of Cu precipitation in silicon.
Read the full abstract
Fluid Dynamics
Influence of plume activity on thermal convection in a rectangular cell
We present three-dimensional direct numerical simulations of turbulent Rayleigh-Bénard convection in a closed rectangular box whose width $L_y$ and length $L_x$ are 0.8 and 2.4 times the height $H$, respectively. The Rayleigh number $Ra$ varies from $10^5$ to $10^{10}$, and the Prandtl number is unity. The advantages of the present configuration are: (a) A relatively stable unidirectional large-scale circulation, consisting of two counter-rotating rolls, fills the cell and fixes the thermal plume ejection- and shear-dominated regions, in contrast to those in closed cylindrical cells. (b) The regions of plume ejection are essentially independent of the sidewalls so that their autonomous existence can be studied. This is because there is some space, or "fetch", for the velocity and thermal boundary layers to develop along the length. (c) This geometry allows one to study the influence of locally thin and thick boundary layers (which follow larger or smaller plume activity) on the scaling of convection properties. In regions of larger plume activity (defined by an incessant movement of plumes), the temperature fluctuation as well as the normalised thermal and viscous dissipation rates decay more slowly with $Ra$ than in regions of lower activity. Both viscous and thermal boundary layers thin down rapidly with increasing distance from the plume ejection region. The local thicknesses of both boundary layers decline more rapidly with $Ra$ in the ejection region than in regions of impact and shear, where they are similar to each other. Despite these details, the global heat transport laws are practically the same as those in other configurations of low to moderate aspect ratios.
Read the full abstract
Quantum Physics
A Comparative Study of Hybrid Quantum and Classical Genetic Algorithms in Portfolio Optimization
This work investigates the performance of a Hybrid Quantum Genetic Algorithm (HQGA) compared to a classical Genetic Algorithm (GA) for solving the portfolio optimization problem. Our results indicate that the HQGA converges faster to the optimal solution than its classical counterpart, while also maintaining a higher level of population diversity throughout the optimization process. In addition, the HQGA requires significantly fewer evaluations-to-solution than a brute-force approach to reach the global optimum.
Read the full abstract
Materials Science
A unified descriptor framework for hydrogen storage capacity and equilibrium pressure in interstitial hydrides
Hydrogen is a promising energy carrier, yet its practical deployment is limited by the lack of storage materials that simultaneously achieve high storage capacity ($w$) and practical equilibrium pressure at room temperature ($P_{\rm eq,RT}$). Interstitial metal hydrides offer fast kinetics and favorable thermodynamics (high $P_{\rm eq,RT}$) but suffer from intrinsically low w. Here, we establish a physically interpretable, data-driven framework to uncover descriptor-property relationships in interstitial hydrides using a curated database of pressure-composition-temperature measurements (Digital Hydrogen Platform, DigHyd) and white-box symbolic regression. Strikingly, the analysis reveals a clear separation of governing mechanisms, in which $w$ is governed by geometric and lattice conditions, captured by the average atomic radius ($\left\langle r_M \right\rangle$) and average thermal conductivity ($\left\langle\kappa\right\rangle$), with an optimal regime of $r_M \sim 1.47 \r{A}$ and relatively low $\left\langle\kappa\right\rangle$. In contrast, $P_{\rm eq,RT}$ is governed by elastic properties, captured by the average shear modulus ($\left\langle G \right\rangle$) and average Poisson's ratio ($\left\langle \nu \right\rangle$), reflecting the role of lattice rigidity and mechanical compliance. These relationships are translated into compositional optimization pathways that follow the descriptor trends above, enabling the design of candidate materials with enhanced w under practical equilibrium conditions ($P_{\rm eq,RT} \sim 0.1$ MPa). This work establishes a general, interpretable strategy for physics-informed design of energy materials systems.
Read the full abstract
Mesoscale and Nanoscale Physics
Neuromorphic computing with optomechanical oscillators
The increasing resource demands of artificial neural networks have prompted the exploration of novel platforms better suited for machine learning. In this context, phase oscillators represent a promising candidate due to their intrinsic nonlinearity and their ability to exhibit collective synchronization when coupled together. In the present work, we investigate one such implementation: a network of optomechanical oscillators pumped in the blue-detuned regime to achieve self-sustained oscillations. We propose a theoretical framework to describe their dynamics and demonstrate how such systems can be employed for neuromorphic computing. We discuss how they can be trained and analyze a platform, based on drum resonators, that could enable their physical implementation. Ultimately, the theoretical results obtained from modelling an XOR gate using 5 nodes in an all-to-all configuration are discussed.
Read the full abstract
Mesoscale and Nanoscale Physics
Step-Edge Anomaly in Topological Metals
Bulk-boundary correspondence guarantees the presence of robust, anomalous states on the boundary of topological matter. The edges of a two-dimensional Chern insulator harbor one-dimensional chiral states, which have a conductance $n\, e^2/h$, where $n$ is an integer that is solely determined by the bulk. In this work we show that step edges on the surface of three-dimensional topological metals have a robust conductance $K\, e^2/h$, where $K$ is also fixed by the bulk and assumes non-integer values. We explain this prediction on the basis of the topology of gapless systems, exemplify it on a lattice model, and connect to recent experimental observations of enhanced density of states at step-edges in topological metals.
Read the full abstract
General Relativity and Quantum Cosmology
Optical Appearance of Scalarized Kerr-Newman Black Holes with Multiple Light Rings
This study investigates the optical appearance of rotating scalarized Kerr-Newman black holes in the Einstein-Maxwell-scalar theory with exponential coupling. By analyzing equatorial null geodesics, these black holes are classified into six types according to the number and properties of their light rings. Combining slow-rotation analysis with full numerical ray tracing, we investigate images of black holes illuminated by a geometrically and optically thin accretion disk. Unlike the Kerr case, where the image is typically governed by a single outer photon shell and a single critical curve, scalarized Kerr-Newman black holes can develop an additional inner photon shell outside the event horizon. This extra shell gives rise to an inner critical curve inside the usual outer one, which may be absent, partial, or closed depending on the black hole parameters and the observer's inclination. Moreover, it generates new higher-order images in the region between the two critical curves, some of which exhibit crescent-like morphologies distinct from the nearly circular higher-order images familiar from Kerr black holes. These features enrich the optical appearance of scalarized black holes and could serve as distinctive observational signatures in future high-resolution observations.
Read the full abstract
Solar and Stellar Astrophysics
Prominence signatures in the Fraunhofer G-band; Testing ionization memory with multi-line prominence diagnostics
The Fraunhofer G-band around 4304 Å is widely used as a photospheric diagnostic and is generally not expected to show signatures of chromospheric or coronal structures. However, recent amateur observations have suggested the presence of off-limb prominence emission in this spectral region. We investigate the origin of the prominence emission in the G-band to determine if this is caused by methylene (CH) or other lines in this band. We also aim to test these lines for the presence of ionization memory effects in neutral lines. We present a case study of two prominences, one obtained with a Solar Explorer (Sol'Ex) spectroheliograph and another with the high-resolution Fast Multi-Line Universal Spectrograph (FaMuLUS) camera system at the echelle spectrograph of the German Vacuum Tower Telescope (VTT). Line widths are measured for simultaneously observed neutral and ionized metal lines, allowing a comparison of thermal and non-thermal broadening components to see if these lines exhibit any ionization memory effects. We report clear prominence emission in several metal lines within the G-band, primarily from Ti II and Ca I lines, while contributions from CH molecular lines are not observed. A comparison of the simultaneously observed ionized and neutral lines reveals no clear evidence for an ionization memory effect. Since the prominence emission does not originate from CH lines, we will not call them "G-band prominences" but rather prominences in the G-band, as they are independent of the primary diagnostic in this spectral window. In addition, the absence of a clear ionization memory effect suggests that such effects may be less pronounced for weak neutral lines.
Read the full abstract
Optics
High-Endurance, Low-loss Sb2Se3 Optical Switches on Silicon Nitride using Transparent Conductive Heaters
We report an electrically actuated, low-loss non-volatile optical switch based on the phase-change material (PCM) Sb2Se3 integrated on a silicon nitride (Si3N4) platform. The device is fabricated using an 8-inch wafer-scale process flow, demonstrating the feasibility of scalable manufacturing for photonic integrated circuits (PICs). By employing transparent indium tin oxide (ITO) micro-heaters, reversible switching between the amorphous and crystalline states is achieved with an extinction ratio of 25~dB and an endurance exceeding 140 million switching cycles, establishing a new benchmark for non-volatile integrated photonic memory and reconfigurable architectures. Furthermore, multi-level operation beyond 6 bits can be repeatably demonstrated by tailoring the electrical pulse widths, enabling precise control of the optical phase. These results highlight a scalable and energy-efficient platform for high-density programmable and non-volatile photonic integrated systems.
Read the full abstract
High Energy Physics (Experiment)
Filtering hits for speeding up online track reconstruction at hadron colliders
Collider experiments are equipped with trigger systems that rapidly inspect the physics content emerging from collisions to decide whether the resulting products are worth saving for later analysis. One crucial aspect for analyzing the final states originating from the collisions is to process the information produced by charged particles in the innermost detectors to reconstruct the corresponding trajectories. This task is a challenge for the experiments running at the Large Hadron Collider (LHC) at CERN because of the large number of secondary collisions per bunch crossing, the so-called pile-up vertices, giving rise to extremely high hit occupancies in the detector layers close to the beam line. Reconstructing tracks is a combinatorial problem and its processing time strongly depends on the average pile-up per event. The future accelerator-complex upgrade to the High-Luminosity LHC, implying even higher detector occupancies, will result in a considerable growth of the computational cost of the current trigger strategies. To face this issue, a new technique for assisting track reconstruction by filtering out unnecessary detector information is presented and characterized in this work. The algorithm is based on a convolutional-neural-network architecture which can be easily deployed on accelerator cards. The impact of this approach is assessed and future prospects are also discussed.
Read the full abstract
Solar and Stellar Astrophysics
Multi-fluid multi-species models for inverse FIP-effect
The inverse First Ionization Potential (FIP) effect is rarely observed in the solar atmosphere, and this anomaly poses a challenging problem in understanding physical processes driving this chemical fractionation. In this work, we investigate various scenarios where the inverse FIP effect could occur using simplified 1D multi-fluid MHD models. The model treats the full MHD equations with multi-fluid and multi-species effects, rather than using wave analysis to derive the ponderomotive force and semi-empirical 1D models. In the parametric study considered here, for upward Alfvén waves, one can achieve a negative (opposite) ponderomotive force when the magnetic field strength and the magnetic flux tubes' expansion with height counteract the dissipation and damping effects from multi-fluid interactions.
Read the full abstract
High Energy Physics (Phenomenology)
All-charm tetraquarks at hadron colliders: A high-precision fragmentation perspective
We present the TQ4Q2.0 fragmentation functions for the production of all-heavy (fully heavy) $S$-wave tetraquarks ($T_{4Q}$) with scalar ($0^{++}$), axial-vector ($1^{+-}$), and tensor ($2^{++}$) quantum numbers in high-energy hadronic collisions. This work extends the previous TQ4Q1.1 framework by incorporating nonconstituent heavy-quark contributions and introducing a replica-based uncertainty-quantification strategy derived from multi-scale variations (MHOUs). The construction follows a nonrelativistic QCD factorization approach, combining gluon- and heavy-quark-initiated fragmentation channels at leading power. Initial-scale inputs are modeled through updated potential-inspired wave functions, while the subsequent DGLAP evolution is performed via the threshold-aware HF-NRevo scheme. A comprehensive systematic analysis of uncertainties is carried out, with contributions from color-composite long-distance matrix elements (LDMEs) and perturbative multiscale inputs. The resulting TQ4Q2.0 grids, publicly released in LHAPDF6 format, provide the first complete phenomenological set for all-heavy exotics, enabling precise studies of all-charm tetraquark production and jet-associated observables within the JETHAD environment. This article completes the high-energy resummation-driven generation of the TQ4Q program and establishes a definitive baseline for future collider-oriented analyses of all-heavy multiquark dynamics.
Read the full abstract
Quantum Physics
NV-ensemble enabled microwave/NV parametric amplifier with optimal driving
In our recent study [arXiv:2601.03407] we showed that a hybrid non-degenerate parametric amplifier could be realized for a microwave mode and an ensemble of NV-centers (or other spins) by parametrically driving the spin ensemble. The parametric driving was sinusoidal at the sum of the spin and cavities frequencies. Here we consider whether the performance of the amplifier can be improved by using a more complex drive. Employing numerical optimization, we find that the optimal driving is primarily a sum of harmonics of the sum frequency. The optimal drive, which is essentially a square wave, ramps up the amplification rate by about 40 %, while limiting the drive to four harmonics improves the amplification by about 22 %.
Read the full abstract
Earth and Planetary Astrophysics
Investigation of gravitational stability of protoplanetary disks based on statistical analysis of their masses
We compiled a sample of $1155$ protoplanetary disks, combining data from ten surveys of star-forming regions. Based on the sample, we constructed a power-law approximation of the disk mass distribution: $dN/dM \propto M^{-\beta}$, $\beta = 1.36 \pm 0.14$. We used the sample for a statistical analysis of the gravitational stability of protoplanetary disks. To analyze the stability of the disks, we calculated the Toomre parameter ($Q$) for each of them. In the calculations, it was assumed that the radial density distribution in the disks is described by a power-law profile. The calculations of the Toomre parameter show that only $1.2$ % of the disks in the sample are formally unstable ($Q < 1$), while $1.7$ % are in a state of marginal stability ($1 \leq Q \leq 2$). The low observed abundance of unstable disks contradicts theoretical expectations and may be explained by a systematic underestimation of disk masses due to limitations of observational methods. Considering the effects of optical depth, CO depletion, as well as uncertainty in the gas-to-dust ratio, we conclude that the actual fraction of the gravitationally unstable systems may be significantly higher.
Read the full abstract
Quantum Physics
Robust quantum metrology using disordered probes
Disorder is ubiquitous in quantum devices including quantum probes designed and fabricated for quantum parameter estimation and sensing. We investigate the robustness of a quantum probe against the presence of glassy disorder. We define a disorder marker quantifying the effect of the disorder by expanding the quantum Fisher information in terms of different orders of the standardized central moments of the disorder-distributions. We classify the quantum probes in terms of the possible values of the disorder marker, and analytically show, for a disorder-sensitive probe with identical and weak disorder on all or a subset of the parameters of the probe-Hamiltonian, that the absolute value of the disorder marker exhibits a quadratic dependence on the disorder strength. We derive a robustness scale intrinsic to the probe that competes with the disorder, and provide a prescription for estimating the maximum disorder strength that the probe can withstand from the disorder-free probe-Hamiltonian for a given initial state of the probe, which can be computed without the disorder averaging. We demonstrate our results in the case of a single-qubit probe under disordered magnetic field, and a multi-qubit probe described by a disordered one-dimensional Kitaev model with nearest-neighbor interactions.
Read the full abstract
Fluid Dynamics
From Sedimentation to Suspension: Critical Strain as a Predictor of Particle Resuspension Thresholds
Viscous resuspension, the process by which sedimented particles are re-entrained into a fluid under flow, is central to numerous natural and industrial systems, including environmental contaminant transport, riverbed erosion, and biogeochemical cycling. Despite its ubiquity and importance, predicting when and how resuspension occurs remains challenging, particularly under oscillatory shear, where particle interactions are nonlinear, collective, and time-dependent. Here, we examine the resuspension dynamics of dense, non-Brownian suspensions under both steady and oscillatory shear using bulk rheometry and in situ rheo-microscopy over a broad range of particle volume fractions ({\phi}= 0.30 to 0.55). We demonstrate that strain is the key control parameter governing the transition from a sedimented bed to a fully suspended state. This strain-driven onset is mediated by effective interparticle collisions and collective particle motion. We develop a predictive model that captures the observed strain thresholds as a function of volume fraction, allowing for the construction of a new state diagram delineating sedimentation, resuspension, and full suspension regimes. These findings reveal a robust, strain-controlled resuspension mechanism and establish a unified framework for predicting suspension behavior across steady and oscillatory flows, offering new tools for managing particle-laden transport in geophysical, biological, and industrial environments.
Read the full abstract
Strongly Correlated Electrons
Quasi-linear `non-metallic' resistivity in the distorted-kagome metal CrPdAs
We report the growth and characterization of single crystals of the disorted-kagome lattice compound CrPdAs. Spin-glass behaviour with $T_{SG} \sim 60\ {\rm K}$ is observed in all crystals tested. Some growths show in addition a magnetic impurity phase with $T_c$ around 200 K, but annealing produces single-phase crystals without the ferromagnetic impurity phase. Single-phase crystals nevertheless have $29\pm 5\%$ anti-site disorder of the Cr and Pd sites, similar to a previous generation of flux-grown polycrystalline samples. We observe a large linear-coefficient of the heat capacity at low temperature, $\gamma = 23 \pm 3$ mJ/mole\,K$^2$, which is typical of kagome metals. The calculated band structure shows several Dirac band-crossings very near $E_F$ whose degeneracy is lifted when spin-orbit interaction is included. Our most curious finding is a `non-metallic' in-plane resistivity, extending over the entire measured temperature range from 300 K down to 2 K. This resistivity is quasi-linear below about 130 K, and shows no sign of saturation down to the lowest temperature measured.
Read the full abstract
Chaotic Dynamics
Prediction of chaotic dynamics from data: An introduction
This chapter offers a principled approach to the prediction of chaotic systems from data. First, we introduce some concepts from dynamical systems' theory and chaos theory. Second, we introduce machine learning approaches for time-forecasting chaotic dynamics, such as echo state networks and long-short-term memory networks, whilst keeping a dynamical systems' perspective. Third, the lecture contains informal interpretations and pedagogical examples with prototypical chaotic systems (e.g., the Lorenz system), which elucidate the theory. The chapter is complemented by coding tutorials (online) at https://github.com/MagriLab/Tutorials.
Read the full abstract
Optics
Long-wave infrared Fourier transform spectroscopy with enhanced and scalable sensitivity
We report a broadband long-wave infrared Fourier transform spectrometer with sensitivity exceeding that of previously reported direct-detection implementations. The system combines dual-comb spectroscopy with electro-optic sampling, multi-channel parallel near-infrared detection using InGaAs photodiodes, and real-time GPU-based computational corrections of multiple spectroscopy signals. Detection limits of 0.3 ppb for NH$_{3}$ and 2 ppb for C$_{2}$H$_{4}$ are achieved in 500 s, corresponding to 20x and 40x sensitivity improvements over earlier LWIR demonstrations, while maintaining high 0.0027 cm$^{-1}$ spectral resolution and broad spectral coverage. The architecture supports scalable sensitivity through increased detector count and enables rapid multispecies analysis of complex gas mixtures.
Read the full abstract
High Energy Astrophysical Phenomena
Combining the Mass–Radius Posteriors of J0030+0451 Allowing for Unknown Model Systematics
The NASA Neutron star Interior Composition Explorer (NICER) mission measures the X-ray pulse profiles of select millisecond pulsars and uses sophisticated pulse profile modeling (PPM) techniques to constrain their masses ($M$) and radii ($R$), in order to probe the state of matter in their interiors. One of the most studied pulsars, PSR J0030+0451, has been analyzed by multiple groups using different choices of hotspot models. The different choices of hotspot prescriptions to fit the same observational data led to different $M$–$R$ posteriors that do not completely agree with one another, resulting in a practical bottleneck for dense-matter equation-of-state (EoS) inference. In this paper, we adapt a robust Bayesian combination framework to the published $M$–$R$ posteriors of PSR J0030+0451 while allowing for unknown systematic uncertainties that might have led to the apparently divergent results. Using this technique, we combine eight existing $M$–$R$ posteriors into a single conservative and reproducible posterior that incorporates unknown model systematics across the currently available analyses and is suitable for direct use in EoS studies. The resulting constraint is $M = 1.46^{+0.09}_{-0.08}\,M_\odot$, $R = 12.69^{+0.64}_{-0.55}\,\mathrm{km}$, and compactness $C = 0.172^{+0.006}_{-0.007}$ (68% credible interval). Incorporating this combined J0030+0451 constraint in an EoS-agnostic joint analysis with PSR~J0437–4715 and GW170817 yields $R_{1.4} = 11.98^{+0.58}_{-0.68}\,\mathrm{km}$ and $\Lambda_{1.4} = 320^{+216}_{-138}$. Our results provide a combined $M$–$R$ constraint for J0030+0451 and a practical framework for incorporating cross-model uncertainty into neutron star EoS inference pipelines.
Read the full abstract
Quantum Physics
Quantum state transfer on a scalable network under unital and non-unital noise
We investigate quantum state transfer on a class of bipartite graphs, namely the butterfly graphs, within the framework of discrete-time quantum walks. These graphs facilitate the construction of scalable quantum networks that enable communication between a sender and a receiver via perfect state transfer. Our analysis demonstrates that state transfer occurs across different butterfly graphs, thereby extending the known families of networks that support high-fidelity quantum state transfer. In addition to the ideal noiseless dynamics, we further investigate the robustness of quantum state transfer in the presence of non-Markovian environmental noise, specifically, random telegraph noise, modified Ornstein-Uhlenbeck noise, which are examples of unital noise and non-Markovian amplitude damping noise, non-unital noise. These noise models capture different types of system-environment interactions and memory effects that influence the coherence of the quantum walk. These findings contribute to the theoretical understanding of how butterfly graph constructions influence quantum transport phenomena.