Peer Revenue Play credits. Real papers.

Papers

Fresh from arXiv, typeset properly. Highlighted words trade on the market.

Physics

Watch Physics (sign in to use)

Tuesday 19 May

Fluid Dynamics

HiLiftAeroML: A High-Fidelity Computational Fluid Dynamics Dataset for High-Lift Aircraft Aerodynamics

HiLiftAeroML is, to our knowledge, the first open high-fidelity computational fluid dynamics dataset dedicated to high-lift aircraft aerodynamics. It contains 1,800 simulations spanning 180 variants of the NASA Common Research Model high-lift configuration and ten angles of attack from $4^\circ$ to $22^\circ$. Each case was generated with a GPU-accelerated explicit wall-modeled large-eddy simulation approach on solution-adapted grids of 300–500 million cells, covering attached, separated, and post-stall flow conditions. Comparisons with wind-tunnel measurements for reference landing configurations show good agreement in integrated loads and sectional pressures, with grid adaptation substantially improving drag and pitching-moment predictions. The CC-BY-4.0 release includes geometries, time-averaged surface and volume fields, integrated loads, validation material, and deterministic benchmark splits. Initial GeoTransolver and Transolver baselines, evaluated on the complete native surface and volume support of every held-out case rather than on a sampled subset, reconstruct the fields well for several interpolation and held-out-geometry tests, while high-angle separated flow, limited-data training, and out-of-distribution flow-regime shifts remain substantially harder. The dataset and baselines provide a common resource for developing and assessing data-driven models for realistic high-lift aerodynamics.
Read the full abstract

All authors Neil Ashton, Adam Clark, Konrad Goc, Liam Heidt, Christopher Ivey, Rahul Agrawal, Sanjeeb T Bose, Corey Adams, Peter Sharpe, Daniel Leibovici, Semih Akkurt, Sheel Nidhan, Rishi Ranade, Jean Kossaifi

Materials Science

Impact of the Lattice Constant on the Polymorphism of Organic/Inorganic Interfaces

The polymorphism of organic/metal interfaces influences many of their properties. As a result, a host of contemporary research focuses on analyzing the factors which are pertinent for modifying polymorphism. In this work, we elucidate how the lattice constant of the underlying lattice affects the energetic landscape of adsorbate monolayers for the model system of tetracyanoquinodimethane (TCNQ) on coinage metal surfaces with varying lattice constants. In particular, we focus on how the adsorbateadsorbate and the adsorbate-substrate interaction are affected when increasing the lattice constant and changing the surface chemistry. Based on these investigations, we show that the adsorbate-substrate interaction for some adsorption geometries can change significantly with the lattice constant. In addition, due to a transition from repulsive to attractive adsorbate-adsorbate interactions, polymorphs with tight packing become more favorable, if the lattice constant is increased, resulting in a lattice-constant-based phase transition.
Read the full abstract

Soft Condensed Matter

Tracking Coupled Granular Temperature and Entropy Dynamics in Granular Materials via Dielectric Spectroscopy

In glass-forming liquids, structural dynamics are governed by configurational entropy and temperature, with dielectric relaxation time scaling alongside structural relaxation time as described by the Adam-Gibbs (AG) model. Under Edwards's athermal statistical thermodynamics, a modified AG law similarly governs granular matter, provided that granular temperature and configurational entropy are appropriately defined. This study investigates whether variations in the structural relaxation of granular systems can be probed via thermally activated processes, specifically electric charge hopping and trapping. By progressively reducing the volume of graphite powder to vary its packing fraction, we estimated relative configurational entropy and granular temperature from volumetric data, while evaluating electrical conductivity and capacity via impedance spectroscopy. We demonstrate that the logarithm of the dielectric relaxation time, derived from complex impedance, scales with granular temperature and entropy across both loose and compact states. Consequently, changes in the complex impedance resulting from packing fraction variations are tuned by granule configuration, strictly adhering to an AG-like relationship for thermal systems. These findings establish dielectric spectroscopy as a viable, non-destructive tool for tracing configurational dynamics in granular matter, analogous to its established use in polymers and glass formers.
Read the full abstract

Classical Physics

Automated Discovery of Metainterfaces with Tailored Friction Laws

Providing dry solid contacts with on-demand macroscale frictional behaviour remains a formidable challenge in tribology, haptics or robotics. Metainterfaces created from surfaces with engineered asperity-based topographies can achieve such friction control. However, only few friction behaviours were demonstrated because suitable topographies were identified based on human intuition. Here, we introduce a numerical-optimisation-based inverse design framework to automatically discover new metainterfaces satisfying specified relationships between friction and normal forces (friction law). To illustrate the framework's versatility, we first expand the range of achievable friction coefficients at a constant material pair; we next unlock power-law friction laws with arbitrary exponents between 2/3 and 1.35; we then achieve bilinear laws with a smaller slope in the second segment than in the first. We validate relevant cases experimentally. By enabling systematic exploration of large parameter spaces, not limited to topography but potentially incorporating the individual asperities' bulk material or surface physicochemistry, our automated framework offers design solutions for any physically possible friction law. It also provides new insights into the elusive relationship between local interfacial properties and macroscopic friction.
Read the full abstract

All authors Li Fu, Djibril Gabriel Kashala, D. Dalmas, J Scheibert

High Energy Astrophysical Phenomena

Recent Findings from the Telescope Array Experiment

The Telescope Array (TA) is the largest ultra-high energy cosmic ray (UHECR) observatory in the Northern Hemisphere. Together with its extensions, TA Low Energy (TALE), TALE infill, and the TA$\times$4 array, it measures extensive air showers (EAS) initiated by UHECRs across an energy range spanning from $10^{15}$ eV to beyond $10^{20}$ eV. All components of the experiment employ a hybrid detection approach, combining plastic scintillator arrays that sample the EAS footprint at ground level with telescopes that record fluorescence and Cherenkov light from shower development in the atmosphere. The ongoing construction of TA$\times$4 will significantly increase statistics at the highest energies by expanding the surface detector area by a factor of four. In addition, the recently deployed TALE infill array further lowers the hybrid energy threshold of TALE. This presentation summarizes the current status of the TA experiment and highlights recent findings on the energy spectrum, mass composition, and anisotropy.
Read the full abstract

High Energy Physics (Theory)

Large Order Enumerative Geometry, Black Holes and Black Rings

Exploiting newly available data on Gopakumar-Vafa invariants at high genus for one-parameter hypergeometric Calabi-Yau threefolds, we study numerically the growth of the 5D indices, stable pair (PT) invariants and rank one Donaldson-Thomas (DT) invariants at large charges. For the 5D index $\Omega_{5D}(d,m)$, below a critical value of the angular momentum $m$, we find perfect agreement with the Bekenstein-Hawking-Wald entropy of rotating 5D BMPV black holes, including the subleading correction from four-derivative interactions. When $m$ exceeds the critical value, the 5D index is instead dominated by black rings with the smallest possible dipole charge. The stable pair invariant $PT(d,m)$, which is determined by 5D indices, has a similar black ring/hole transition at negative $m$ (now interpreted as the D0-brane charge) but surprisingly exhibits two other phase transitions at positive $m$: first, to a plateau and then to a polynomial growth $\sim m^{2d-1}$. In each phase, we derive an approximate expression for the invariant. Finally, the rank one DT invariant $DT(d,m)$ is similar to $PT(d,m)$ at negative $m$, and then transitions to a phase dominated by D0-branes, with entropy of order $m^{2/3}$. Along the way, we determine the fixed genus, large degree behavior of GV invariants (including the overall $g$-dependent constant), extend it to an approximate formula valid also for large $g$, point out the unreasonable effectiveness of a simple PT/MSW relation, and study the growth of topological free energies at fixed degree, confirming a conjecture of Mariño.
Read the full abstract

High Energy Physics (Phenomenology)

A comparative study of $T_{cc}$ versus $X(3872)$ production in $pp$ collisions at $\sqrt{s}=$ 7 TeV

The production of exotic hadrons $T_{cc}$ and $X(3872)$ in $pp$ collisions at $\sqrt{s}=7$ TeV is compared using the parton and hadron cascade model PACIAE together with the dynamically constrained phase-space coalescence model DCPC. In the simulation, the compact tetraquark state and the loose molecular state are formed in the partonic and hadronic levels, respectively. Our analysis of the transverse momentum spectra reveals a significant discrepancy between the compact state and the molecular states. Furthermore, the production asymmetry between $T_{cc}^+$ and $T_{cc}^-$ is investigated. Finally, the coalescence parameters are extracted from the calculated spectra to further characterize the emission source properties. These distributions are proposed as valuable criteria for distinguishing between these states and investigating their internal structures in experimental measurements.
Read the full abstract

All authors Hongge Xu, Tianqi Luo, Yi-Long Xie, Zhi-Lei She, Ning Yu, Zuman Zhang

Medical Physics

On the Hyperelastic Behavior of the Boar Diaphragmatic Tendon Membrane by Inflation Tests and Modeling

Background: Despite the large variety of materials used to repair congenital diaphragmatic hernia (CDH), none has proven ideal due to complications and risk of recurrence. Understanding the mechanical behavior of the diaphragm's central tendon is essential for developing biomimetic prostheses. Objective: This study aims to characterize the hyperelastic behavior of the porcine diaphragmatic tendon under biaxial loading conditions. Methods: Biaxial hyperelastic response of the porcine diaphragmatic central tendon was characterized using bulge inflation tests combined with full-field stereo digital image correlation (3D-DIC). Principal stretches were extracted from the reconstructed three-dimensional geometry using a spherical-cap approximation, with corrections for clamping-induced pre-deformation. Several incompressible isotropic hyperelastic models (Neo-Hookean, Mooney-Rivlin, Yeoh and Fung) were first evaluated as phenomenological baselines. To account for the anisotropic mechanical signature of the tendon, a transversely isotropic hyperelastic formulation of the Humphrey-Yin type was implemented. This model represents an effective anisotropic response associated with the lamellar and collagen-rich structure of the tissue through its thickness, while assuming isotropy within the membrane plane. Results: The diaphragm tissue exhibited an exponential mechanical response. Neo-Hookean and Mooney-Rivlin models failed to capture the observed behavior, while the Yeoh model slightly overestimated nonlinearity. The Fung model provided the closest fit to the nonlinear pressure-stretch response, yet failed to reproduce the directional differences observed between meridional and circumferential stretches. The Humphrey-Yin model provided a markedly improved description of the experimental data over the full inflation range. Parameter identification revealed that the transversely isotropic contribution dominated the strain-energy response, highlighting the limitations of isotropic constitutive laws for modeling diaphragmatic tendon mechanics, even under macroscopically axisymmetric inflation. Despite specimen-to-specimen variability, no significant differences were observed between left and right diaphragm samples. Conclusion: Overall, this work demonstrates that effective anisotropic hyperelastic formulations are required to describe the biaxial mechanical behavior of the diaphragmatic central tendon under inflation loading. The proposed experimental-numerical framework provides a robust basis for biomechanical modeling and constitutes a first step toward the development of biomimetic prosthetic materials for diaphragmatic repair.
Read the full abstract

All authors R. Anwar, J. Vasquez-Villegas, S. Le Floc'h, P. Royer, N. Bahlouli, Christiane Wagner-Kocher

High Energy Physics (Phenomenology)

Top Pair Threshold Revisited

Recently the CMS and ATLAS collaborations have found evidence for an unexpectedly large ttbar cross section in the threshold region, with an excess of the order of 5-10 pb relative to continuum perturbative calculations. A convenient approach to the theoretical study of this region, unifying the above- and below-threshold behaviour, is the non-relativistic Green's function formalism. It was first applied to top production more than 35 years ago, well before the discovery of the top. We therefore revive and dissect the old formalism, and put it back together in a more consistent form, suited for Monte Carlo event generation. Combined with some practical prescriptions, it can be applied to current conditions. As an example, the below-threshold cross section comes out to be of the order of 6.5 pb, i.e. comparable with the CMS and ATLAS numbers. The new code is publicly available in the Pythia event generator so can be used for more detailed comparisons.
Read the full abstract

Quantum Physics

Quantum-enhanced distributed network sensing using multiple quantum resources

We propose a theoretical scheme for quantum enhanced distributed network sensing, targeting multiphase estimation by leveraging multiple quantum resources. Specifically, we investigate the performance advantage in a distributed quantum network (DQN) for multiphase sensing by integrating three types of quantum resources(TQRs): quantum catalysis, entanglement, and squeezing. Our results reveal that employing all three TQRs leads to better sensing performance than using only two TQRs under both lossless and lossy conditions, with precision approaching the Heisenberg limit. We further demonstrate that partial quantum catalysis providesa stronger precision advantage than global catalysis in both ideal and noisy regimes. We identify a practical homodyne measurement scheme for globally and partially catalyzed multimode W type coherent states, whose measurement sensitivity can approach the corresponding quantum Cramer Rao bound. In this practical setting, partial catalysis also yields better measurement sensitivity than global catalysis. Moreover, under photon loss, both global and partial catalysis of multimode W type coherent states exhibit a loss catalysis dual enhanced sensitivity region. These findings highlight the quantum-enhanced advantages conferred by hybrid quantum resources for practical DQN sensing applications. Our work opens a way for realizing quantum-enhanced DQN sensing.
Read the full abstract

All authors Rui Zhang, Zi-Yu Zhou, Wen-Quan Yang, Ya-Feng Jiao, Xun-Wei Xu, Le-Man Kuang

High Energy Physics (Phenomenology)

Weak Triplet Models of Neutrino Magnetic Moments

Experimental limits on neutrino magnetic moments remain several orders of magnitude above the predictions of the Standard Model; therefore, any future detection would provide unambiguous evidence for new physics. In models with Dirac neutrinos, however, mechanisms that enhance the magnetic moment typically generate excessively large neutrino masses. Recently, it has been argued that in frameworks where neutrinos mix with weak-triplet Dirac fermions, the magnetic moment can be decoupled from the neutrino mass. In this work, we revisit this possibility and show that sizable enhancements remain highly nontrivial to realize naturally. We demonstrate that, although the minimal realization allows the magnetic moment to be decoupled from the neutrino mass, obtaining an observable enhancement requires a delicate adjustment of the model parameters. Moreover, in extended scenarios, the decoupling no longer persists: the magnetic moment and neutrino mass become intrinsically linked, such that attempts to enhance the former inevitably induce large contributions to the latter.
Read the full abstract

Solar and Stellar Astrophysics

Towards inertial-mode helioseismology: Direct sensing of solar rotation at 75 deg latitude and 0.8 Rsun

Solar internal rotation at high latitudes is poorly constrained by acoustic-mode helioseismology. Global inertial modes observed on the Sun are highly sensitive to solar differential rotation and may provide new diagnostics of rotation in these regions. We aim to constrain solar rotation with the measured frequency of the $m=1$ high-latitude inertial mode, starting from the HMI/SDO reference rotation profile given by p-mode helioseismology for 2010-2024. Using a validated and accurate eigenvalue solver, we compute the perturbation to the mode frequency resulting from localised changes in the differential rotation rate throughout the solar interior. We find that the linear sensitivity kernel of the $m=1$ high-latitude mode peaks at latitude 75 deg and radius $0.8 R_\odot$, with full widths of 7 deg and $0.13 R_\odot$. From the observed mode frequency in the Carrington frame, $-87.9 \pm 1.9$ nHz (retrograde, averaged over 2010-2024), we infer that the solar rotation rate near this location is $365.3\pm 2.0$ nHz, which exceeds the reference p-mode estimate by $8.1$ nHz. Additionally, we propose a latitudinally smooth, radially independent modification to the rotation rate at high latitudes beyond the linear (small-perturbation) regime. This work demonstrates that individual inertial modes can provide direct constraints on rotation in the bulk of the solar convection zone, well below the surface, representing the first example of spatially resolved inertial-mode helioseismology.
Read the full abstract

Quantum Physics

Construction of three-qubit positive-partial-transpose entangled states of rank four

Multiqubit positive-partial-transpose (PPT) entangled states play an important role in quantum information theory. We characterize such states of minimum rank in three-qubit system, namely rank four. Depending on whether the Lorentz invariant is zero, we classify such states into two types. The PPT entangled states constructed by unextendible product bases (UPB) have nonzero invariants, which belong to type I. We provide a method to effectively determine whether a state can be constructed from UPB. For states with zero invariant, which belong to type II, we provide an explicit expression up to equivalence of stochastic local operations and classical communications (SLOCC). It turns out that we can represent them with only one complex parameter. We further study SLOCC-equivalence relation within the expression. We also investigate the Lorentz invariants of multiqubit states with rank less than three and analyze their range.
Read the full abstract

Astrophysics of Galaxies

A Value-added Physical Properties Catalog for Low-redshift Galaxies from DESI Legacy Imaging Surveys DR10

Galaxy physical properties-such as star formation rate (SFR), stellar mass, and gas-phase metallicity-are essential for population studies and evolutionary analyses. Deriving these quantities for billions of galaxies in modern imaging surveys presents significant challenges due to limited spectroscopy and the computational costs associated with traditional spectral energy distribution fitting. As a result, many galaxies in large photometric surveys still lack homogeneous property estimates. This study introduces a multimodal deep learning model that integrates optical imaging with photometric catalog features to estimate SFR, stellar mass, and oxygen abundance in low-redshift galaxies. The model incorporates a ResNet-based convolutional neural network to extract spatial information from multiband images and a multilayer perceptron that processes catalog-level photometric features, leveraging complementary constraints from morphology, surface brightness, and broadband colors. Trained on reference measurements from the MPA-JHU DR8 catalog, the model is optimized for efficient large-scale estimation. When applied to the DESI Legacy Imaging Surveys (LS) DR10, the model generates a value-added catalog containing physical property estimates for approximately 547 million galaxies with redshifts z <= 0.5. Validation through comparisons with independent catalogs and exploration of key scaling relations demonstrates that while the derived properties are not intended for precision measurements of individual objects, they effectively capture the dominant astrophysical trends necessary for ensemble studies. This catalog represents the first homogeneous set of photometry-based SFR, stellar mass, and metallicity estimates for DESI LS DR10, providing a vital resource for statistical studies of galaxies in the local Universe and facilitating comparisons with current and future spectroscopic surveys.
Read the full abstract

All authors Shirui Wei, Changhua Li, Yanxia Zhang, Chenzhou Cui, Jinghang Shi, Wujun Shao, Zihan Kang, Yongheng Zhao, Maoyuan Huang

Instrumentation and Detectors

The measurement of late-pulses and after-pulses in the large area Hamamatsu R7081 photomultiplier with improved quantum-efficiency photocathode

In recent years, large underwater telescopes have been designed and realized to measure high energy neutrinos from astrophysical objects. Muon tracks produced by the neutrino interaction in the surrounding medium are reconstructed from the arrival time and the number of photo-electrons of the Cherenkov light measured by the Photomultiplier tubes (PMT) array of the detector. For a correct reconstruction procedure, both the scattering of the light in the water and the late and after pulses produced in the PMTs must be considered. In this paper we report on this latter effect which has been measured in our laboratory using a laser in the single photoelectron mode (SPE) on a Hamamatsu R7081MOD 10" PMT with a high quantum efficiency photocathode. The PMT voltage supply was set to provide the 1 photo-electron peak at 10 pC as during normal operation: in this condition we find that the late-pulse contribution is small but not negligible.
Read the full abstract

All authors S. Aiello, M. Anghinolfi, A. Balbi, M. Brunoldi, K. Gracheva, A. Grimaldi, V. Kulikovskiy, E. Leonora, G. Ottonello, D. Sciliberto, M. Taiuti, Y. Yakovenko

High Energy Astrophysical Phenomena

The Astro2Geo Project I. Radio astrometric offsets correlated with Gamma-ray brightness

Precision geodesy relies on the stability of the International Celestial Reference Frame (ICRF), yet its reference sources, Active Galactic Nuclei (AGN), exhibit changes in source structure that can manifest as apparent shifts in their astrometric positions. The high-precision radio measurements used to maintain the ICRF therefore provide a means to investigate the astrophysical mechanisms driving these changes. In particular, the observed astrometric variability offers a unique opportunity to link positional shifts in AGN to high-energy astrophysical processes. We investigated the relationship between the astrometric positions of ICRF AGN and their Gamma-ray emission. We measured the positional offsets of radio cores relative to the ICRF3 at both S/X and K bands and compared them to Fermi-LAT Gamma-ray fluxes within +/-30 days. Out of 92 radio sources, we identified 57 that had enough overlapping data. We find a high incidence of statistically significant (p<0.05) power-law correlations, with ~90% of sources exhibiting this behaviour. The nature of this correlation is complex: we observe both positive and negative correlations, and the sign of the correlation can differ between the two frequency bands for the same source. To explain the correlations, we tested variable Gamma-ray emission locations, changes in nuclear opacity, and variations in jet position angle. Our analysis reveals no single explanation and suggests a complex interplay of multiple physical mechanisms. A search for time lags between the radio position offsets and Gamma-ray fluxes revealed tentative - and highly caveated - evidence for a time-delay in only five sources. A statistical comparison with the OCARS catalogue shows that, although our sample is biased towards optically brighter sources with better-constrained astrometric solutions, it remains representative of the broader AGN population in terms of redshift.
Read the full abstract

All authors Jeffrey A. Hodgson, Hana Krasna, Aletha de Witt, Pfesesani van Zyl, Janeth Valverde

Statistical Mechanics

Orthogonal Decomposition of Discretization-Induced Transport-Information Cost under Rank-Deficient Parametrizations

When we consider discretization of continuous probability distributions, it inevitably induces irreversible geometric distortion of local measure on the discretized support. While such discretziation-induced distortion is extrinsic to information geometry (IG) alone, we recently demonstrate that the discretization cost can be naturally characterized by the standard Kullback-Leibler (KL) divergence between continuous distributions as expectation of their infinitesimal parameter variations. The framework is based on the correspondence between optimal transport (OT) and IG, primarily requring the selected parameters directly identifiable with support coordinates. The present work extends the framework to more generalized parametrization theta, particularly the Jacobian between theta and support coordinates is rank-deficient, which generally results in breaking down the interpretation of the discretization-induced costs as information-geometric quantities. To address the problem, we here introduce an orthogonal decomposition of the second-moment tensor onto linear subspace for the covariance matrices generated by parameter fluctuations, based on Frobenius projection. The decomposition naturally separates the discretization cost into observable and unobservable components relative to the chosen parametrization. The present formulation provides a geometric framework for analyzing partial observability of discretization-induced transport-information costs. The present framework thus clarifies the role of parametrization-dependent information loss.
Read the full abstract

Optics

Near-Field Vibrational Energy Transfer for Mid-Infrared Upconversion in Plasmonic Nanogaps

Förster energy transfer underpins modern photonics, yet establishing an analogous vibrational pathway in the mid-infrared (MIR) remains highly challenging, as sub-picosecond intramolecular vibrational redistribution (IVR) suppresses intermolecular coupling. Here we demonstrate vibrational donor–acceptor transfer in the MIR and subsequent upconversion to visible luminescence enabled by sub-2 nm plasmonic nanogaps. The extreme lateral field confinement in metal–molecule–metal ring cavities defined by self-assembled molecular spacers couples efficiently to in-plane molecular dipoles. Continuous-wave MIR excitation selectively populates $-\mathrm{C}\equiv\mathrm{N}$ vibrational donors, and plasmon-enhanced near-field coupling transfers this energy to nearby electronic acceptors, generating anti-Stokes visible emission under low power densities. Upconversion efficiencies exceeding $0.3\%$ are observed, limited by competition between the plasmon-mediated transfer rate and IVR. These results show that extreme plasmonic confinement can redirect molecular vibrational relaxation pathways, opening a route toward vibrational nanophotonics, intermolecular interactions for bioimaging, and room-temperature MIR detection based on molecular degrees of freedom.
Read the full abstract

All authors Avisekh Pal, Anju Sajan, Christopher Sumner, Eman Alharbi, Wolfgang Theis, Rohit Chikkaraddy

Materials Science

Nanoscale Thermal Imaging of Dislocation-Mediated Heat Transport

Dislocations in crystalline materials are widely exploited to tailor the thermal conductivity of semiconductors and thermoelectrics, yet a critical gap persists: direct measurement of local thermal resistance at individual buried dislocations, along with its spatial extent, remains elusive due to the limitations of conventional thermal probes. Here, we use in situ scanning transmission electron microscopy-electron energy-loss spectroscopy to map nanoscale temperature distributions across a low-angle SrTiO3 grain boundary with periodic dislocation arrays. Our results reveal a temperature drop of 47 K across the dislocation array. The associated temperature-field distortions are concentrated near the dislocation cores, consistent with stronger local thermal resistance at these discrete sites rather than a uniformly distributed resistance along the array. We further identify a distinct two-scale heat transport characteristic near the dislocation array: core-dominated effects over approximately 4.8-6.2 nm and extended inter-core influences over approximately 10.3-14.3 nm. Atomic-scale structural and vibrational analyses further reveal core-associated atomic reconstruction and localized optical-phonon perturbations, providing a microscopic basis for the stronger local thermal resistance inferred near dislocation cores. These findings quantitatively resolve spatial heterogeneity of dislocation-mediated heat transport, uncover its atomic-scale mechanism, and provide a quantitative basis for defect engineering, guiding the design of high-performance thermoelectrics, semiconductors, high-temperature structural alloys, and other functional crystalline materials.
Read the full abstract

All authors Ruilin Mao, Bingyao Liu, Jiaxin Liu, Xiaoyue Gao, Junping Luo, Fachen Liu, Ruochen Shi, Jiade Li, Jinlong Du, Peng Gao

Materials Science

High-Throughput Bayesian Optimization of Cement-Salt Hydrates Composites for Seasonal Thermochemical Energy Storage

Thermochemical energy storage (TCES) based on salt hydrates is a promising route for seasonal heat storage; however, the design of practical sorbent materials remains challenging due to a non-trivial coupling between composition, synthesis feasibility, performance, and cost. Here, focusing on salt-into-matrix cement-based composites, we demonstrate that a high-throughput experimental framework based on Bayesian optimization (BO) can be used to orchestrate the optimization process of composite materials for low-temperature TCES. The explored design space is defined by salt type, salt concentration, water-to-cement ratio, and additive-to-cement ratio, while two competing objectives are pursued in parallel, namely the specific energy and the specific energy cost. The BO-guided campaign identified Pareto-optimal composites based on CaCl$_2$, Zn(NO$_3$)$_2$, and LiCl, highlighting the promise of cement-salt combinations that have been only marginally explored, or not previously reported, in cement-based TCES systems. The best-performing formulation (LiCl-based), achieved an average specific energy of about $\SI{458}{\kilo\joule\per\kilo\gram}$, whereas CaCl$_2$- and Zn(NO$_3$)$_2$-based composites showed lower but still competitive specific energy values combined with more favorable specific energy cost. Overall, the optimized formulations improved the specific energy of previously developed cement-based materials by up to a factor of five, although it remains below that of state-of-the-art composites based on silica gel and expanded vermiculite. Nonetheless, the present materials, notably CaCl$_2$- and Zn(NO$_3$)$_2$-based composites, offer an attractive cost-to-performance balance, highlighting BO as an effective strategy for accelerated TCES materials discovery.
Read the full abstract

All authors Alessio Mondello, Giulio Barletta, Luca Lavagna, Matteo Fasano, Matteo Pavese, Eliodoro Chiavazzo

Instrumentation and Methods for Astrophysics

Methodological Synergies between Technosignature and UHE Neutrino Searches

Radio technosignature searches and radio-based ultra-high energy (UHE) neutrino experiments address different scientific questions, but share a closely related data analysis problem: identifying rare signals of unknown morphology within large datasets dominated by thermal noise and anthropogenic radio-frequency interference (RFI). UHE neutrino radio experiments (including ARA, RNO-G, ANITA, and PUEO) have developed advanced methodologies for continuous-wave (CW) mitigation and background characterization. This invited contribution makes that connection concrete through three points. First, we demonstrate that catalog-based time-domain sine subtraction – the CW mitigation technique used in ANITA and ARA – can be adapted for technosignature pipelines by restricting subtraction to documented persistent contaminants, improving broadband transient visibility while preserving uncataloged narrowband candidates. Second, we identify a structural equivalence between spatiotemporal clustering used in UHE neutrino experiments and direction/cadence-based RFI rejection in radio SETI, proposing a joint feature space incorporating direction, time, frequency, bandwidth, duration, and polarization. Third, we argue that background-only anomaly ranking is the natural second stage of this workflow, providing morphology-agnostic candidate triage. Together, these ideas motivate a 'preserve-then-rank' workflow for commensal rare-event discovery, opening a near-term path toward cross-community collaboration.
Read the full abstract

Nuclear Theory

Ab initio correlations between neutrinoless and two-neutrino double-beta decays in $^{48}$Ca

We develop a novel ab initio in-medium no-core configuration-interaction (IM-NCCI) framework for nuclear charge-exchange processes by combining the in-medium similarity renormalization group with chiral nuclear Hamiltonians, and apply it to the $2\nu\beta\beta$ and $0\nu\beta\beta$ decays of $^{48}$Ca. This framework reproduces the locations of several main resonance peaks in the Gamow-Teller (GT) strength distribution for the $^{48}\mathrm{Ca}\to{}^{48}\mathrm{Sc}$ transition. The cumulative GT strength indicates missing contributions from two-body weak currents, corresponding to an effective quenching factor of $q\simeq0.84$. Incorporating this quenching yields a $2\nu\beta\beta$ nuclear matrix element (NME) in excellent agreement with experiment. Applying the same framework to $0\nu\beta\beta$ decay, and including the contribution from short-range operators, we obtain a total NME of $M^{0\nu}=1.00\text{-}2.02$. Using 34 non-implausible chiral Hamiltonians, we establish from first principles strong linear correlations between the $0\nu\beta\beta$ NME and the NMEs governing $2\nu\beta\beta$ decay and double GT transitions. Combining these correlation relations within the 95% confidence level with the experimental $2\nu\beta\beta$-decay data yields a constrained prediction of $M^{0\nu}=1.30\text{-}1.65$. This work establishes IM-NCCI as a complementary ab initio framework for nuclear weak decays and opens a pathway toward constraining $0\nu\beta\beta$ NMEs in heavier candidate nuclei using experimentally accessible $2\nu\beta\beta$-decay data.
Read the full abstract

All authors X. Lian, C. R. Ding, C. L. Bai, J. M. Yao

Quantum Physics

Universal logic gates for coupled period-doubling systems

We propose a general architecture for universal logic operations using NAND and NOR gates on classical information encoded in period-doubled states of periodically-driven systems. The protocol involves applying a single pulse that simultaneously couple two input nodes with an output node. We show that the states of the nodes can be precisely controlled by tuning the coupling strength and pulse duration, allowing for robust logic gate operation. To highlight the universality of the protocol, we demonstrate its applicability on different systems, such as classical networks of dissi- pative parametric oscillators (DPO), quantum networks of Kerr parametric oscillators (KPO), and the periodically-driven open Dicke lattice model (DLM) emulating discrete time crystals (DTCs). We identify the parameter regimes in which the logic gate architecture is valid, and we showcase its robustness in the presence of fluctuations.
Read the full abstract

Cosmology and Nongalactic Astrophysics

Prospect of Measuring the Cosmic Dipole by Associating Strongly Lensed Gravitational Waves with Galaxy Surveys

The cosmic dipole observed in the cosmic microwave background (CMB) is traditionally interpreted as being caused by the observer's motion relative to the background. However, tensions with dipole measurements from radio galaxy counts motivate the need for independent probes. This work investigates the feasibility of using strongly lensed gravitational wave (GW) events to measure the cosmic dipole. Strongly lensed GWs produce multiple time-delayed images, which can be used to infer the distances to both the lens and the source. These distances, associated with the observed redshifts of the lens and the source from galaxy catalogues, encode information about the background cosmology and cosmic dipole effects. By reconstructing a statistical sample of doubly lensed GW events based on the singular isothermal sphere lens model, the cosmic dipole can be estimated jointly with background cosmological parameters. Using realistic simulations for Einstein Telescope and Cosmic Explorer, we forecast that a dipole magnitude $g$ consistent with both the CMB and number count measurement could be detected with 10 years of observation. Furthermore, constraints on $g$ are greatly improved by combining constraints from doubly lensed events with those from triply or quadruply lensed events. In the most optimistic scenario, where we measure the number count dipole magnitude with 10 years of observation, we obtain $g = (2.45^{+1.53}_{-1.28}) \times 10^{-3}$ from the combined constraint, provided that systematic uncertainties are mitigated. Although challenging, strongly lensed GWs offer a novel approach to measuring the cosmic dipole, providing an independent consistency test with different systematics from electromagnetic probes.
Read the full abstract

Mathematical Physics

Algebraic Leonard trio approach to rational functions: the Hahn case

The finite families of Hahn polynomials and associated biorthogonal rational functions are interpreted algebraically in the framework of Leonard trios. We introduce the trio Hahn algebra and prove that it is isomorphic to the meta Hahn algebra, thereby clarifying the structural connection between Leonard trios and meta algebras. Finite dimensional realizations in terms of difference operators are constructed, and the functions of interest arise as overlaps between eigensolutions of ordinary eigenvalue problems. Their bispectral and biorthogonality properties follow naturally from the algebraic framework.
Read the full abstract

All authors Nicolas Crampé, Quentin Labriet, Lucia Morey, Luc Vinet

High Energy Astrophysical Phenomena

Radio-X-ray Time Lags in GX 339-4: Probing Magnetic Field Transport in Black Hole Accretion

We present an analysis of the time delay between the radio emission and the X-ray Compton luminosity during the 2010-2011 outburst of GX 339-4. Using the interpolated cross-correlation function (ICCF), we measure the time delay between the Compton luminosity and the radio luminosity, and find that during the rising hard state, the radio emission precedes the Compton luminosity by approximately 3 days. In contrast, in the decaying hard state, the radio emission lags behind the Compton luminosity by about 8 days. By estimating the mass accretion rate and the disk truncation radius, the calculated inner magnetic field can account for both the radio delay in the decaying hard state and the radio precedence in the rising hard state. The time delays observed in different outbursts across multiple sources are compared further, and the underlying physical mechanisms account for this difference are discussed. These results provide insights into the evolving coupling between the inner accretion flow and the jet in black hole X-ray binaries.
Read the full abstract

All authors Dizhan Du, Bei You, Zhen Yan, Yuao Ma, Xinwu Cao

Solar and Stellar Astrophysics

Chromospheric resonator model for sunspot revealed by multi-height observation of umbral wave

Sunspots are transient, magnetically intense features that host oscillations linked to magnetohydrodynamic (MHD) waves. These waves may contribute to plasma heating and drive mass flows in the solar wind. Beyond their energetic role, they serve as diagnostic tools for probing sunspot structure. In this study, we investigated chromospheric wave propagation in a sunspot using high-resolution, multi-wavelength observations from the Goode Solar Telescope at Big Bear Solar Observatory. Spectral analysis shows that the intensity at H$\alpha$ line core and its wings exhibited oscillatory signal at about 3 min. We performed a cross-wavelet analysis to examine the phase relationship between the wing-integrated and line-core intensity oscillations of the H$\alpha$ line and the centroid-derived H$\alpha$ Doppler velocity. We also analyze the phase relationships between intensity pairs from different passband combinations of the H$\alpha$ line. The results indicate the presence of slow magnetoacoustic modes manifesting standing waves along with upward propagating waves. The observed phase patterns suggest that umbral waves are confined within a non-ideal acoustic resonator, providing measurable wave properties that could serve as input for sunspot seismology and refine models of sunspot atmospheric structure.
Read the full abstract

All authors Kartika Sangal, A.K. Srivastava, Libo Fu, Ding Yuan, Song Feng, Yuandeng Shen

Quantum Physics

Efficient Fault-Tolerant Ancilla Preparation for Quantum BCH codes via Cyclic Symmetry

One of the major challenges in realizing fault-tolerant quantum computers (FTQCs) is the requirement for a large number of physical qubits. To address this issue, high-rate quantum error correcting codes, which efficiently embed logical qubits into physical qubits, have recently attracted considerable attention. Among such codes, quantum BCH codes, which offer both high rates and large code distances, are promising yet underexplored candidates. However, no fault-tolerant ancilla preparation method specialized for this class had been established. We employ a two-stage approach (non-fault-tolerant preparation + entanglement distillation) for ancilla preparation. We then propose a framework for designing low-overhead distillation method that strategically leverages the cyclic symmetry of quantum BCH codes to determine which non-fault-tolerant circuits can successfully produce a fault-tolerant state. Numerical simulations on several high-performance quantum BCH codes up to 127 qubits demonstrate that our method achieves lower spatial overhead and logical error rates than conventional distillation circuits. Furthermore, we evaluated the logical error rates under a circuit-level noise model, and obtained performance benchmarks in realistic settings. This efficient state preparation technique is expected to contribute to the early realization of practical FTQCs, particularly on highly connected quantum platforms such as neutral atom systems.
Read the full abstract

Fluid Dynamics

Optimal airfoils in the intermediate Reynolds number range

We revisit a classical airfoil design problem: the search for shapes that maximize aerodynamic performance metrics, targeting the underexplored intermediate Reynolds-number regime between 1 and 3000, relevant to small animals and miniature vehicles. The problem is formally stated as the glide ratio or the endurance factor maximization for Joukowski airfoil profiles and for more general airfoil shapes with adjustable position of the maximum camber, under steady inflow. It is solved numerically by a hybrid approach combining stochastic search and direct parameter sweep, and using a steady laminar Navier–Stokes solver based on conformal mapping and second-order finite-difference discretization. Zero-thickness cambered airfoils are found to be globally optimal, within the Joukowski family, across the entire Reynolds-number range considered. The optimal angle of attack decreases monotonically with $Re$, whereas the optimal camber varies non-monotonically, reaching a pronounced maximum near $Re \approx 40-50$ before declining at higher $Re$. At low Reynolds numbers ($Re \lesssim 100$), a broad family of cambered shapes performs within a few per cent of the optimum, indicating weak sensitivity to geometrical parameters. In contrast, for $Re \gtrsim 1000$, the performance landscape becomes sharply localized around a single preferred design, for which geometric refinement is critical.
Read the full abstract