Materials Science
First-principles calculations of electrical conductivities of edge-modified graphene nanoribbons: strain effect
Sanjay Prabhakar and Roderick Melnik
We investigate the influence of strain on the electrical properties of
graphene nanoribbons that have potential applications in making sensors and other optoelectronic devices. In particular, we chose pristine armchair
graphene nanoribbons with 7 zigzag edges (7aGNRsH), boron doped armchair
graphene nanoribbons with 7 zigzag edges (7aGNRsH-B) and armchair
graphene nanoribbons with 7 zigzag edges that have one carbon atom vacancy (7aGNRsH-V). Based on first-principles calculations, results show that pristine unstrained 7aGNRsH is electrically nonconductive but turns to be electrically conductive in a wide range of energy spectrum, e.g., from IR to visible to UV, due to the application of strain engineering. In metallic unstrained and strained 7aGNRsH-B and 7aGNRsH-V, non-vanishing electrical conductivity in the IR, visible and UV energy spectrum regimes are observed. We also investigate the influence of strain on the Berry
curvature of 7aGNRsH, 7aGNRsH-B and 7aGNRsH-V nanoribbons. The results show that
fermions are spread through out the Brillion zone in the reciprocal space for semiconducting unstrained 7aGNRsH but localized near the $\Gamma$-point for strained 7aGNRsH that have out-of-plane deformations due to strain engineering. For metallics 7aGNRsH-B and 7aGNRsH-V, Berry
curvature plots show that
fermions are localized far away from the $\Gamma$-point. In two atom boron doped p-type armchair
graphene nanoribbons with 7 zigzag edges (7aGNRsH-2B), large peaks in electrical conductivity at IR energy spectrum regimes can be observed. These peaks of electrical conductivities in 7aGNRSH-2B may be detectable in experimentally synthesized structure in Reference, JACS 137, 8872 (2016).
Read the full abstract ▾
Materials Science
An Efficient Approach for Calculating Free Energy in Molecular Dynamics: Demineralization of Hydroxyapatite as a Case Study
Mahdi Tavakol, Jin-Chong Tan and Alexander M. Korsunsky
Despite the strength of Molecular Dynamics simulations in providing insights into the microscopic details of phenomenon in many fields in materials science, physics and biology, the biggest barrier is its limited timescale which is several orders of magnitude lower than the timescale of the real-world processes and phenomena being modeled. Free energy calculations are designed as a remedy to this problem that in theory can overcome this barrier. This is particularly relevant for biomineralisation processes such as tooth mineral formation and dissolution, while reflecting a broader challenge in accurately modelling rare events and long-timescale phenomena across complex molecular systems. However, due to the novelty of the field, a number of questions remain outstanding pertaining to the best practice of applying this method. The non-
equilibrium work approach based on the Jarzynski equation is one of the most promising free energy calculation methods. However, the biggest challenge for the broader use of this method is the question of how many simulations are required for an accurate free energy estimation. Comparing the free energy results with very long reversible pulling simulations of atom clusters from the surface, each taking 75 days on the 48-core Intel Xeon Platinum 8268 CPUs, in this study we showed that this question is irrelevant and higher quality and better equilibrated initial structures is the proper approach than simply based on the number of simulations. We designed a new adaptive free energy calculation methodology which combines high quality, high computational cost free energy values with lower quality, lower cost values to build up the entire free energy profile. In the best case scenario this method lowers
manifold the computational cost required for the non-
equilibrium work free energy calculations compared to both the regular method and the reversible simulation.
Read the full abstract ▾
Quantum Physics
From Constraint to Code: DQI-Kit – A Software Framework for Decoded Quantum Interferometry
Simon Thelen and Wolfgang Mauerer
Trying to solve hard optimisation problems with
quantum techniques requires transformations of domain objectives and constraints into formats compatible with a chosen
quantum algorithm. This often introduces inefficiencies and overheads that limit or even endanger potential
quantum advantage for current and future approaches. To understand and mitigate these inefficiencies, software toolchains are essential for implementing transformations, analysing overheads and eventually selecting optimal transformation paths. Decoded
Quantum Interferometry (DQI) is a novel approach that achieves apparent
quantum advantage for certain algebraic optimisation problems. It natively operates on Max-LINSAT, which is unusual for combinatorial optimisation, and creates the need for software solutions that alleviate the burden of manually transforming problems of interest into this format. We present DQI-Kit, a software framework that provides a unified, extensible interface for automatically encoding constrained optimisation problems into Max-LINSAT. Users can describe the various types of objectives and constraints that are common in industrial optimisation problems. Our framework converts these into Max-LINSAT instances via a series of problem transformations and computes an estimate of the expected performance of DQI on these instances. We provide an initial analysis of the implemented transformations, discussing inefficiencies and ways to mitigate them. DQI-Kit is the basis for our ultimate goal of establishing a standardised framework that will enable further investigations to identify practical use cases for which
quantum advantage with DQI can be achieved.
Read the full abstract ▾
Mesoscale and Nanoscale Physics
New Source of Spin-hot spot in displaced silicon double quantum dots
Sanjay Prabhakar
Controlling electron
spins in double
quantum dots allows individual electrons to be trapped and manipulated for next-generation solid-state
qubit devices. In this paper, the study analyzes
spin relaxation due to deformation potentials of acoustic
phonon in single and double
quantum dots under in-plane and out-of-plane
magnetic fields, showing that in single
quantum dots the relaxation rate is highly sensitive to low in-plane
magnetic fields ($<1T$) but converges near a
spin-hot-spot region. In a single
quantum dot, the
spin-hot spot arises from well-understood level crossings between singlet and triplet states. In double
quantum dots, a new and unusual
spin-hot spot appears as the dots are pulled apart from the origin, with
spin-relaxation rates three orders of magnitude lower than conventional single
quantum dots. In displaced
quantum dots dominated by
magnetic confinement, two distinct
spin-hot spots appear at different in-plane
magnetic field strengths, where
spin-relaxation time varies from millisecond to picosecond. When
quantum dots are separated by about 60 nm, calculations predict oscillations in
spin-hot spots as the in-plane
magnetic field changes. These unusual
spin-hot spot oscillations occur at low
magnetic fields ($<1T$), resulting in
spin-relaxation rates about four orders of magnitude lower than those of conventional high-field
spin-hot spots ($\approx 4.5T$). The extremely low
spin-relaxation rate at the
spin-hot spot enables the preparation of
qubit superposition states for
quantum computing and information processing.
Read the full abstract ▾
Mesoscale and Nanoscale Physics
Reprogrammable magnonic logic in a multiferroic heterostructure via magnetoelectric coupling
Ping Che, Amr Abdelsamie, Ádám Papp et al. (+14 more)
The realization of fully reconfigurable, voltage-controlled, and programmable on-chip magnonic devices is essential to fully harness the potential of
spin waves for signal processing, logic and neuromorphic computing. Yet, existing demonstrations of electrical tuning of magnonic responses are either volatile, current-driven and thus energy-inefficient, or rely on local strain modification limiting their scalability for wafer-scale integration. Here, we address this challenge using a BiFeO3/La0.67Sr0.33MnO3 multiferroic thin film
heterostructure. We show that ferroelectric domain engineering in BiFeO3 enables deterministic tuning of the
magnon dispersion of La0.67Sr0.33MnO3, producing frequency shifts up to $\sim 150 MHz$ and allowing reconfigurable waveguiding. Micro-focused Brillouin light scattering directly images these effects, revealing electrically defined magnonic waveguides and spatially programmable dispersion. Compared to conventional approaches, this method provides non-volatile and reversible control. Furthermore, using an inverse-design simulation code, we demonstrate the capability of our platform to perform advanced magnonic functions such as frequency demultiplexing. Our results open a new avenue for using magnetoelectric
heterostructures for magnonic logic, with further applicability to reservoir and neuromorphic computing and AI driven magnonic devices.
Read the full abstract ▾
All authors Ping Che, Amr Abdelsamie, Ádám Papp, Sali Salama, André Thiaville, Romain Lebrun, Stéphane Fusil, Vincent Garcia, Aymeric Vecchiola, Karim Bouzehouane, Manuel Bibes, Agnès Barthélémy, Jean-Paul Adam, Vladislav Demidov, Paolo Bortolotti, Abdelmadjid Anane, Isabella Boventer
Cosmology and Nongalactic Astrophysics
Circular polarization of the cosmic microwave background induced by the optical Magnus effect on gravitational lensing
Yusuke Nishida
Polarization of the
cosmic microwave background (CMB) brings out information not only on the early universe but also on the late-time large-scale structure via weak gravitational
lensing. Here, we show that circular polarization is induced in principle from CMB temperature fluctuations when the optical Magnus effect is incorporated into gravitational
lensing. This is a consequence of the transverse shift of a trajectory of light depending on its helicity that requires right-handed and left-handed components at the same observation point to be sourced from different points of the surface of last scattering. Whereas the resulting circular polarization is found far beyond the scope of current detection, our work establishes the optical Magnus effect on gravitational
lensing as a new fundamental mechanism to produce circular polarization of CMB.
Read the full abstract ▾
Quantum Physics
Degree-Guided Adiabatic Quantum Algorithm for MIS with Neutral Atoms
Guy Karni, Noam Cohen and Adi Pick
We present a
quantum adiabatic
algorithm for solving MIS with Rydberg atoms, which uses graph degrees to engineer the
Hamiltonian for adiabatic
evolution. Our approach extends the
algorithm of Pichler et al. for MIS state preparation, which uses time-dependent global controls to excite atoms while the Rydberg blockade mechanism suppresses adjacent excitations. To accelerate adiabatic
evolution, we introduce local light shifts that favor excitation of low-degree nodes and constrain the final
Hamiltonian so that energy scales inversely with the number of Rydberg excitations, preventing convergence to non-MIS states. Benchmarking our degree-dependent MIS
algorithm with the traditional adiabatic
algorithm on a set of 1000 MIS instances, we demonstrate numerically that our
algorithm inflates the minimal spectral gap and, consequently, accelerates the convergence. By fitting power-law relations for both the time-to-solution and success probability metrics as a function of the hardness parameter, we demonstrate a superior scaling exponent for our
algorithm over the traditional global protocol. Furthermore, the classical
Hamiltonian engineering step required to construct degree-dependent controls introduces only
polynomial overhead. These results indicate that our
algorithm can be used to extend the size of graphs for which MIS can be found on physical hardware. Moreover, our approach extends beyond MIS to additional graph problems such as MAX-CUT.
Read the full abstract ▾
Superconductivity
Hong-Min Jiang, Hao Du and Shun-Li Yu
The superconducting (SC) pairing
symmetry and its link to time-reversal
symmetry breaking (TRSB) in the vanadium-based kagome
superconductors remain unresolved, with ambiguities stemming from sublattice interference and charge-density-wave (CDW)
entanglement with superconductivity. Using two representative SC pairings, i.e., the conventional on-site $s$-wave and the TRSB $d_{x^2-y^2}+id_{xy}$-wave, as a model study, we theoretically show that while single
magnetic impurity yield qualitatively identical spectral behavior of local density of states (LDOS) for these two
symmetries, two
magnetic impurities give rise to distinct LDOS patterns. For the conventional on-site $s$-wave pairing, time-reversal
symmetry (TRS) enforces equivalent forward and backward scattering between two
impurities across all
impurity configurations, leading to near disappearance of a Yu-Shiba-Rusinov (YSR) state pair along the line connecting the two
impurities. However, for the TRSB $d_{x^2-y^2}+id_{xy}$-wave pairing, this scattering equivalence holds only for inversion-symmetric
impurity configurations, with a pair of YSR disappearance restricted to this case. These distinct spectral features are resolvable in scanning tunneling microscopy (STM) experiments, providing a direct avenue to discriminate TRSB and non-TRSB SC pairing
symmetries in kagome
superconductors and an alternative method to probe SC nonreciprocity that circumvents the ambiguities of conventional critical current-based techniques.
Read the full abstract ▾
High Energy Physics (Theory)
Examples of Invertible Gauging via Orbifold Data, Zesting, and Equivariantisation
Benjamin Haake
We study the gauging of invertible
symmetries, particularly in 3 dimensions, using equivariantisation, $G$-crossed braided zesting, and the generalised orbifold construction. We discuss how these methods are related and illustrate them in various examples. We cover all $\mathbb{Z}_2$-
symmetries in Dijkgraaf–Witten $\mathbb{Z}_2$-gauge theory $\mathcal{D}(\mathbb{Z}_2)$, the $\mathbb{Z}_2$-
symmetries described by Tambara–Yamagami categories, and obstructions to gauging the central
symmetry in Chern–Simons $\mathrm{SU}(2)_k$-gauge theory. We introduce zested orbifold data for
symmetries related by zesting and show that the two associated orbifold data are Morita-equivalent, i.e.\ they have the same underlying surface defect.
Read the full abstract ▾
General Relativity and Quantum Cosmology
Reconstruction of Tsallis Holographic Dark Energy via Modified Non-Metric Gravity: An $f(Q,C)$ Approach
Sanjeeda Sultana and Surajit Chattopadhyay
In the current research, we have reported the Tsallis
Holographic Dark Energy (THDE) (JCAP, 2018(12), p.012.) model reconstructed within the framework of $f(Q, C)$
gravity (JCAP, 2024(03), p.050.), combining
entropy-based dark energy models with geometrically motivated modified
gravity to explain late-time
cosmic acceleration. The reconstructed model is found to exhibit significant sensitivity to the parameter space $(H_0, a_0, n, \delta, \zeta,r_d)$ and the initial conditions. The
evolution of the equation of state and deceleration parameters is found to be highly dependent on these parameters. A comprehensive Markov Chain Monte Carlo analysis using observational
datasets comprising {CC+Pantheon$^{+}$+DESI DR2} was performed, yielding best-fit values that demonstrate strong consistency with observational data, which is further validated for its consistency through the computation of the age of the Universe. The
evolution of the jerk and snap parameters is examined and compared with the $\Lambda$CDM prediction. Statefinder diagnostics, through the evolutionary trajectories of the pairs $(r, s)$ and $(r, q)$ are derived and indicate that the model passes through the $\Lambda$CDM fixed point and the physical viability of the model is further consolidated through analysis of the four energy conditions.
Read the full abstract ▾
Materials Science
Interface engineering of the anomalous Hall effect in Ni-based heterostructures
Mainak Ghosh, Kusampal Yadav, Kalyan sarkar et al. (+3 more)
Using a combined experimental and first-principles theoretical approach, we demonstrate interface engineering of the anomalous
Hall effect in Ni-based epitaxial thin-film
heterostructures.
Ferromagnetic Ni thin films are grown on (001)-oriented single-
crystal LaAlO$_3$, SrTiO$_3$, and MgO substrates, which impose different biaxial tensile strains of 0.3%, 0.6%, and 0.8%, respectively. Our room-temperature
Hall transport measurements reveal a pronounced substrate-dependent modulation of the anomalous
Hall conductivity. Interestingly, our calculations show that strain alone cannot account for the experimentally observed trends. Instead, we identify interfacial inversion-
symmetry breaking, which induces Rashba
spin-orbit interaction, as the key mechanism governing the anomalous
Hall conductivity across different interfaces. Building on this understanding, we further demonstrate both theoretically and experimentally that the anomalous
Hall conductivity can be continuously tuned by an external electric field. These findings establish the critical role of substrate-induced interfacial effects in controlling the anomalous
Hall effect in engineered
heterostructures and provide a viable pathway toward electrically tunable room-temperature spintronic devices.
Read the full abstract ▾
All authors Mainak Ghosh, Kusampal Yadav, Kalyan sarkar, Kousik Das, Devajyoti Mukherjee, Sayantika Bhowal
Quantum Physics
Exact Entanglement-Depth Speed Frontier for Complete Quantum Charging
Wenlong Sun, Gang Lu and Yuanfeng Jin
Complete
quantum charging provides a sharp setting in which to ask how much multipartite
entanglement is forced by speed itself. For a closed \(N\)-
qubit battery evolving from \(\ket{\downarrow}^{\otimes N}\) to \(\ket{\uparrow}^{\otimes N}\) under a time-independent
Hamiltonian, we exactly solve the pure-state depth-constrained speed problem. If the realized trajectory has
entanglement depth at most \(k\), then the largest possible QSL-normalized rate \(\eta=\tau_{\rm QSL}/T\) is \(\eta_{\max}(k)=\lceil N/k\rceil^{-1/2}\). Conversely, an observed rate \(\eta\) certifies trajectory
entanglement depth at least \(\bigl\lceil N/\lfloor \eta^{-2}\rfloor\bigr\rceil\). The mechanism is block orthogonalization: under a fixed product partition, complete charging forces all blocks to orthogonalize simultaneously, and the
quantum speed limit converts this counting constraint into the speed bound. Balanced cluster-flip evolutions saturate the bound, establishing an exact integer staircase frontier. Thus fast complete charging cannot be explained by many small independently charging blocks; in particular, crossing the threshold \(\eta>1/\sqrt2\) certifies, for \(N>1\), the generation of genuine \(N\)-partite
entanglement.
Read the full abstract ▾
High Energy Physics (Theory)
Nonlinear response of the chiral magnetic effect in the D3/D7 holographic model
Masataka Matsumoto, Mirmani Mirjalali and Ali Vahedi
We investigate the nonlinear response of the
chiral magnetic current to an external
magnetic field in a
holographic setup. Using the D3/D7 brane system, where the
chiral magnetic effect (CME) can be realized by considering rotating probe D7-branes, corresponding to introducing an axial chemical potential, we analyze the current-
magnetic field relation beyond the linear regime. Focusing on the vicinity of the phase boundary between the insulating phase and the CME phase, we find that the
chiral magnetic current exhibits a multi-valued dependence on the
magnetic field, indicating a highly nonlinear response characteristic of this model. We further study the dynamical stability of the insulating phase near the transition point, and show that the presence of both an axial chemical potential and an external
magnetic field cooperatively stabilize the system. Our results clarify the interplay between the axial chemical potential and the
magnetic field in determining the phase structure and stability of the system, and reveal new nonlinear aspects of
chiral transport in
holographic gauge theories.
Read the full abstract ▾
Astrophysics of Galaxies
Magnetised CGM Gas at z~1 revealed by SPICE-RACS
Sunil Malik, S. P. O'Sullivan, A. J. M. Thomson et al. (+17 more)
Magnetic fields are expected to permeate the circumgalactic medium (CGM) of
galaxies, yet direct constraints at high
redshift remain limited by the lack of high-quality Faraday rotation measure (RM) data. Using the RMs from SPICE-RACS DR2 combined with the DESI DR1
quasar catalogue, we compile the largest sample to date of 2483
quasar sightlines with associated RMs, including 612 with intervening Mg II absorbers tracing foreground
galaxies and 1871 control sightlines without Mg II absorbers. After subtracting the
Galactic RM contribution and restricting the analysis to sightlines with low Milky Way HI column density and H$\alpha$ intensity, we obtain a foreground-cleaned sample of 757
quasars (191 Mg II / 566 control) spanning
redshifts $0.13<z<3.45$. In this foreground-cleaned sample, Mg II sightlines exhibit a $4.5\sigma$ excess in the residual RM dispersion of $4.13 \pm 0.91~\mathrm{rad\,m^{-2}}$ relative to the control sample, at a median absorber
redshift of $z\sim1.14$. This implies model-dependent CGM
magnetic field strengths of $\sim0.4 - 0.8\, \mu$G over projected radii of $20 - 150$ kpc. This indicates that substantial CGM magnetisation was already established by $z\sim1$, enabling new constraints on the growth and amplification of
magnetic fields in
galaxy halos over
cosmic time.
Read the full abstract ▾
All authors Sunil Malik, S. P. O'Sullivan, A. J. M. Thomson, C. S. Anderson, C. Van Eck, L. Rudnick, Amit Seta, B. M. Gaensler, Y. K. Ma, Takuya Akahori, D. Alonso-López, M. Brüggen, E. Carretti, S. W. Duchesne, T. J. Galvin, G. Heald, O. Hlinka, A. Khadir, S. A. Mao, R. Omae
Astrophysics of Galaxies
The Rapid ASKAP Continuum Survey VII: Spectra and Polarisation In Cutouts of Extragalactic Sources (SPICE-RACS) Second Data Release – Unveiling the Magnetised Sky
Alec J.M. Thomson, Timothy J. Galvin, Stefan W. Duchesne et al. (+18 more)
We present the second data release (DR2) of Spectra and Polarisation in Cutouts of Extragalactic sources from RACS (SPICE-RACS). SPICE-RACS DR2 is derived from the third low-band epoch of the Rapid ASKAP Continuum Survey (RACS-low3) and covers the entire sky from the South celestial pole up to a declination of $+49^\circ$; approximately 87.5% of the celestial sphere. We produce 'cutout' spectral cubes in Stokes $I$, $Q$, $U$ around 4 million
radio sources and extract spectra towards 5 million
radio components. Across our observed band of 799.5–1087.5 MHz we find an $rms$ noise of $\sim200\mu\mathrm{Jy/PSF}$, an angular resolution of $\sim15''$, and residual wide-field instrumental polarisation on the order of 0.1%. After de-duplication, our polarisation catalogue contains the detection of $2.5\times10^5$ ($3.4\times10^5$) Faraday rotation measures (RM) for components with a linearly polarised signal above $8\sigma$ ($6\sigma$). This places SPICE-RACS DR2 as the largest single RM catalogue ever produced by nearly an order of magnitude; the number of RMs in our catalogue alone is $\sim5$ times larger than every previous RM catalogue combined. Our resulting RM grid has an areal density of $6.7^{+1.8}_{-1.7}\mathrm{deg}^{-2}$, providing an effective 'resolution' of $\sim23'$, and reveals striking features across the sky. The broad-band RMs have a median uncertainty of $\sim2\ \mathrm{rad\ m}^{-2}$, and include complexity metrics and information from the time domain. The breadth and quality of the SPICE-RACS DR2
dataset will enable a new generation of RM science. Further, SPICE-RACS will provide an ideal reference for forthcoming deep polarisation surveys such as the ASKAP POSSUM survey. All of our data products are publicly available on the CSIRO Data Access Portal (DAP) and the CSIRO ASKAP Science Data Archive (CASDA).
Read the full abstract ▾
All authors Alec J.M. Thomson, Timothy J. Galvin, Stefan W. Duchesne, Emil Lenc, George Heald, Ondrej Hlinka, Sunil Malik, Craig S. Anderson, Erik Osinga, Lerato Baidoo, N. M. McClure-Griffiths, Sebastian Hutschenreuter, Shane P. O'Sullivan, Takuya Akahori, B. M. Gaensler, J. P. Leahy, Y. K. Ma, Vanessa A. Moss, L. Rudnick, C. L. Van Eck, J. L. West
High Energy Astrophysical Phenomena
SN 2023dbc in M108: Optical and Near-Infrared Observations of a Highly-Obscured, Moderately Energetic Stripped-Envelope Supernova
Masayuki Yamanaka, Takahiro Nagayama, Akari Kumano et al. (+4 more)
We present near-infrared (NIR) and optical observations of the highly reddened and moderately energetic Type Ib
supernova (SN) 2023dbc, covering a period from 2 to 136 days after the explosion. By comparing its color
evolution, specifically in $r-JHK_{\mathrm{s}}$ and $i-JHK_{\mathrm{s}}$, with those of broad-lined Type Ic (Ic-BL) and Type IIb SNe, we estimate a significant extinction of $A_{V}=4.1\pm0.1$\,mag toward the SN. The extinction-corrected peak absolute magnitudes are $M_{J} = -16.8\pm0.2$\,mag, $M_{H} = -16.8\pm0.2$\,mag, and $M_{K_{\mathrm{s}}} = -17.0\pm0.2$\,mag. The SN exhibited an $r$-band rise time of 14.9 days. The spectra display broad features indicative of high expansion velocities; the He~i line velocity was measured at $16,000\,\mathrm{km\,s^{-1}}$ at $t=-4$\,d. Its spectral profile is broader than those of typical moderately energetic Type Ib SNe, yet narrower than those of Type Ic-BL SNe, placing it in an intermediate category. Based on the light-curve timescale and velocity, we estimate a kinetic energy of $E_k = (4.1\pm0.7) \times 10^{51}$\,erg, an ejecta mass of $M_{\mathrm{ej}} = 2.3\pm0.7\,M_{\odot}$, and a radioactive $^{56}\mathrm{Ni}$ mass of $(3.8\pm0.1) \times 10^{-2}\,M_{\odot}$. An analysis using a two-component model suggests a steep density profile in the outer layer contrasted with a dense inner core, which implies ejecta asphericity. The low $^{56}\mathrm{Ni}$ mass is consistent with a partial fallback scenario. We conclude that SN 2023dbc originated from an aspherical explosion with partial core fallback, arising from a progenitor ($M_{\mathrm{ini}} \simeq 15\,M_{\odot}$) that had retained its helium envelope within a binary system.
Read the full abstract ▾
All authors Masayuki Yamanaka, Takahiro Nagayama, Akari Kumano, Devendra Kumar Sahu, Avinash Singh, Hrishav Das, G. C. Anupama
High Energy Physics (Experiment)
Refined Global Fit of KamLAND Data and the Daya Bay Antineutrino Energy Spectrum
Guihong Huang
Recently, the JUNO experiment published its measurement of the
solar neutrino oscillation parameters $\Delta m^2_{21}$ and $\sin^2\theta_{12}$ based on 59 days of data, with central values differing by $0.2\sigma$ from those released by the KamLAND experiment in 2013. Meanwhile, short-baseline reactor
neutrino oscillation experiments such as Daya Bay, RENO, and Double Chooz have observed significant deviations between the measured antineutrino spectrum and the Huber-Müller model around 5~MeV. To further investigate the impact of these deviations on the measurement of reactor
neutrino oscillation parameters, a global analysis framework is constructed that is weakly dependent on the reactor antineutrino flux model. This framework is based on the independently measured $^{235}\mathrm{U}$ and $^{239}\mathrm{Pu}$ fission antineutrino spectra from the Daya Bay experiment, combined with the public data from KamLAND. First, using the Huber-Müller model, the KamLAND 2013 results are successfully reproduced to within $0.1\sigma$. Then, replacing the Huber-Müller model with the Daya Bay measured antineutrino spectra in a combined analysis, it is found that the best-fit value of the mass-squared difference $\Delta m^2_{21}$ decreases from $7.53^{+0.17}_{-0.16}\times10^{-5}\,\mathrm{eV^2}$ to $7.50^{+0.19}_{-0.18}\times10^{-5}\,\mathrm{eV^2}$, while the best-fit value of the mixing angle $\tan^2\theta_{12}$ also shows a decreasing trend. This result is in better agreement with the latest JUNO measurement, suggesting that differences in the predicted reactor antineutrino spectra may be an important cause of the tension between the two experiments.
Read the full abstract ▾
High Energy Physics (Phenomenology)
3D Initial-State Dynamics across scales: A Comparative Study of saturation and string-based descriptions
Lucas Constantin, Oscar Garcia-Montero, Niklas Götz et al. (+1 more)
We compare the longitudinal deposition of various conserved quantities in the initial condition models of a string based (SMASH) and a saturation based (McDipper) approach. SMASH has been shown to work reasonably well at lower collision energies as an initial condition for the SMASH-vHLLE hybrid approach, while McDipper, based on the color-glass-condensate (CGC), works well in the regime of perturbative QCD. The two models are capable of providing longitudinally resolved initial conditions, which is essential for 3D hydrodynamical simulations. The goal of this study is to interface the different regions of applicability of the two models, to investigate the initial state dynamics in the intermediate energy regime. We analyze the deposition of transverse energy, charge and
baryon number across a large range of collision energies (62.4 GeV to 5.02 TeV) and find that, while they are good agreement at lower energies, their energy and
baryon deposition differs substantially at higher center of mass energies.
Read the full abstract ▾
All authors Lucas Constantin, Oscar Garcia-Montero, Niklas Götz, Hannah Elfner
Disordered Systems and Neural Networks · Cross-listed from stat.ML
A Fourier perspective on the learning dynamics of neural networks: from sample complexities to mechanistic insights
Fabiola Ricci, Claudia Merger and Sebastian Goldt
Neural networks trained with gradient-based methods exhibit a strong simplicity bias: they learn simpler statistical features of their data before moving to more complex features. Previous analyses of this phenomenon have largely focused on settings with (quasi-)isotropic inputs. In this work, we study the simplicity bias from a
Fourier perspective, which allows us to include two key features of natural images in the analysis: approximate translation-invariance and power-law spectra. We first show experimentally that simple neural networks trained on image classification tasks first rely on amplitude information – related to pair-wise correlations between pixels – before exploiting phase information, which encodes edges and higher-order correlations. In view of this, we introduce a synthetic data model for translation-invariant inputs that allows precise control over amplitudes and phases while remaining tractable. We rigorously establish that for isotropic and high-dimensional inputs, classification based on phase information alone is a genuinely hard task: online
stochastic gradient descent (SGD) cannot distinguish the structured inputs from noise within $n \ll N^3$ steps, but needs at least $n \gg N^3 \log^2{N}$ steps. In contrast, we show both experimentally and theoretically that power-law spectra can dramatically accelerate the speed of learning phase information, even if the spectra do not help with classification. Simulations with two-layer networks trained on textures and with deep convolutional networks on ImageNet and CIFAR100 confirm this non-trivial interaction between amplitudes and phases, providing mechanistic insights into how deep neural networks can learn natural image distributions efficiently.
Read the full abstract ▾
Statistical Mechanics · Cross-listed from math.PR
Positive-rate PCA and IPS with stationary Bernoulli measures are rapidly forgetful
Irène Marcovici and Siamak Taati
We prove that every probabilistic cellular automaton with strictly positive transition probabilities that admits a stationary Bernoulli measure is exponentially ergodic. Moreover, the mixing time of any finite region in such a system is logarithmic in the diameter of the region. A similar result holds in continuous time for positive-rate, finite-range interacting particle systems. The proofs use
entropy, and rely on a representation of the system as a perturbation of another system with noise. The ergodic behaviour results from a competition between the accumulation of randomness due to noise and the
diffusion of randomness due to local information exchange. We show that, in two and higher dimensions, the positive-rate probabilistic cellular automata that admit stationary Bernoulli measures are algorithmically indistinguishable from those that do not.
Read the full abstract ▾
High Energy Astrophysical Phenomena
Simulation study of the cosmic ray Sun shadow with a time-dependent solar magnetic field model
Jie Xia, Ming-Yang Cui, Qiang Yuan et al. (+3 more)
During the propagation of
cosmic rays in the
solar system, the Sun will block those particles and form a shadow whose position and depth are very important probe of the
magnetic fields in the Sun's corona, in the interplanetary space, and the Earth's vicinity. In this work we carry out Monte Carlo studies of the Sun shadow, with a novel approach to take into account daily variations of the coronal and interplanetary
magnetic field models. This treatment is suitable for studies of short-term variations of the Sun shadow, which become detectable by the Large High Altitude Air Shower Observatory (LHAASO) experiment. Two different coronal
magnetic field models, the Potential Field Source Surface (PFSS) and Current Sheet Source Surface (CSSS) models, with observational time-varying photospheric
magnetic fields as boundary conditions, are studied in this work. The interplanetary
magnetic fields are then derived using the Parker spiral model based on the coronal ones. Furthermore, both the coronal and interplanetary
magnetic field strengths are corrected using the Parker
Solar Probe (PSP) measurements. We compare the simulation results with the daily observations of Sun shadow by LHAASO in 2021, and find that the CSSS model generally shows better consistency of the displacement of the Sun shadow than the PFSS model.
Read the full abstract ▾
All authors Jie Xia, Ming-Yang Cui, Qiang Yuan, Yi Zhang, Guang-Lu Shi, Li Feng
Nuclear Theory
Self-consistent spectral framework for inclusive nonelastic breakup: The Trojan-horse method as its sub-Coulomb resonant limit
Jin Lei
At the keV-scale energies of
stellar nucleosynthesis, the resonant charged-particle reactions addressed by the Trojan-horse method (THM) proceed through isolated near-threshold resonances, so the low-energy cross section and the resonance strength carry the same information. The standard THM working formula is used there as a fixed extraction prescription, without a controlled reduction from the inclusive nonelastic breakup parent that would identify what it sets aside. I derive the sub-Coulomb resonant THM extraction directly from the Ichimura-Austern-Vincent inclusive nonelastic breakup cross section. A diagonal isolated-pole spectral ansatz for the absorptive participant-target potential, with four explicit validity conditions, reduces the inclusive cross section in the isolated-resonance limit to a per-pole distorted-wave Born approximation cross section on the resonance state, retaining full distortions and the postform interaction and weighted by the channel branching ratio; this is the operational quantity for resonance-strength extraction. The same one-level total-width profile follows independently from the postform transfer amplitude through the exact final states, so the extraction is route independent; a three-layer width analysis fixes its absorptive strength as half the nonelastic decay width, resolving the width and sign ambiguities of the literature. The standard factorized THM formula then follows under three dynamical approximations, plane waves, on-shell binary amplitude, and remnant neglect, together with a zero-range simplification of the projectile vertex, making explicit what it sets aside: the partial-wave coherence and the postform remnant.
Read the full abstract ▾
Strongly Correlated Electrons
Static spin exchange-correlation kernel of the uniform electron gas at finite temperature
Pengcheng Hou, Zhiyi Li, Youjin Deng et al. (+1 more)
We determine the temperature and momentum dependence of the static
spin exchange–correlation kernel of the unpolarized three-dimensional uniform electron gas using variational diagrammatic Monte Carlo. The calculations cover metallic densities with Wigner–Seitz radii $r_s=1\!-\!4$ and temperatures $T/T_F=1/16\!-\!8$, where $T_F$ is the
Fermi temperature. At low temperature, the calculated kernel approaches established ground-state parametrizations. Heating suppresses its
Fermi-scale minimum and reduces its magnitude, while the relative momentum dependence evolves nonmonotonically through the warm-dense crossover. At the two highest temperatures studied, the
spin kernel is nearly constant over $q \leq 2k_F$, where $k_F$ is the
Fermi wave number. The charge kernel at $r_s=1$ retains pronounced momentum dependence under the same conditions, making a local approximation to the XC kernel more accurate in the
spin channel over this interval. The directly sampled uniform response determines the XC free-energy
curvature with respect to
spin polarization, independently of a fitted polarization dependence. This
curvature sets the interaction contribution to the free-energy cost of weak polarization and differs by several percent from the Groth–Dornheim–Bonitz parametrization at elevated temperatures. These results provide momentum-resolved reference data for finite-temperature
spin-response theories and direct constraints on the
spin dependence of thermal free-energy functionals.
Read the full abstract ▾
All authors Pengcheng Hou, Zhiyi Li, Youjin Deng, Kun Chen
Quantum Physics
Basis- and Channel-Selective Quantum Photodetection
Mohamed Hatifi and Brian Stout
Photodetection converts optical
quantum states into measurement events, but the usual electric-field response model becomes restrictive when the detector response is shaped by cavity, superconducting, or metamaterial engineering. We develop a generalized
quantum photodetection framework in which electric and
magnetic field amplitudes contribute coherently to the detection operator, and analyze it in a far-field two-source geometry, a two-mode single-
photon setting, and a lossy resonant detector model. The far-field reference case exhibits complete detector-amplitude cancellation, absent in the electric-only Glauber response, while the single-
photon model shows that the detector continuously rotates the effective measurement basis and controls the first-order visibility via an exact closed-form law. In the resonant realization, a monitored radiative output channel can be dark while the detector remains internally excited and absorptive, with unit absorption of the matched input mode at critical coupling. These results identify basis-selective readout and channel-selective absorption as experimentally relevant signatures of engineered electric-
magnetic photodetection.
Read the full abstract ▾
General Relativity and Quantum Cosmology
Runhua Huang, Tiberiu Harko, Shi-Dong Liang et al. (+2 more)
We investigate the warm inflationary scenario in the Weyl
geometric gravity theory, in which the action is constructed by adding matter to the simplest conformally invariant gravitational action in Weyl geometry. The $\tilde{R}^2$ theory can be formulated equivalently as a linear theory supplemented by an additional scalar degree of freedom originating from higher-order
curvature terms, with the equations of motion obtained via variational methods. We investigate the cosmological implications of the theory by considering the warm inflationary scenario of the early
evolution of the Universe, in which radiation, the inflaton field, and the Weyl vector coexist. We consider the widely studied linear dissipation coefficient model along with a quartic potential, and investigate the influence of the Weyl vector term on the dynamics. We have performed numerical computations for different coupling models, and we have successfully developed a warm inflationary model in which the Universe transitions naturally from an inflationary epoch to a radiation-dominated era. The relevant cosmological observables have been calculated and compared with the latest observational constraints from the ACT data.
Read the full abstract ▾
All authors Runhua Huang, Tiberiu Harko, Shi-Dong Liang, Hong-Hao Zhang, Lei Ming
General Relativity and Quantum Cosmology
Gauge-invariant cosmological perturbations in Type 3 New General Relativity and background-hierarchy bounds
Kyosuke Tomonari, Daniel Blixt and Sebastian Bahamonde
In this paper, we investigate background-hierarchy bounds in Type~3 of New General Relativity (NGR). These bounds arise when the contribution associated with the
evolution of the background spacetime exceeds that of the kinetic term in the perturbed Lagrangian. Type~3 of NGR has two free parameters and is described in a pure-tetrad formulation while preserving diffeomorphism invariance and spatial rotations. We first review Type~3 and identify preferable gauge choices for metric-affine gauge theories of
gravity with Weitzenböck connection, including NGR, from the viewpoint of
symmetry in both Dirac–Bergmann analysis and linear perturbation theory. We then revisit the perturbative analysis of Type~3 and show that the propagating modes are correctly identified even when the perturbed Lagrangian is not written solely in terms of gauge-invariant variables. Finally, we derive the background-hierarchy bounds for the scalar, transverse-vector, and tensor modes around a flat FLRW background, and identify the region of parameter space in which the linear perturbation theory of Type~3 remains viable for cosmological applications.
Read the full abstract ▾
Physics and Society
Editorial Trajectories in Wikipedia Reflect Underlying Hyperlink Structure
Yeonji Seo, Mi Jin Lee, Seung-Woo Son et al. (+2 more)
Wikipedia hyperlinks have primarily been studied as navigational tools for readers, but their role in how information providers move between articles during editing remains less explored. Here, we combine the hyperlink network among English Wikipedia articles with editorial histories to examine how article-to-article structure is associated with editors' transitions between articles. We first address the temporal aspect of edit transitions by showing that transitions between hyperlinked article pairs have shorter inter-event times (IETs) than those between non-hyperlinked pairs, indicating that connected articles are effectively closer in editing sequences. We then turn to the structural organization of editing behavior by coarse-graining the hyperlink network into 19 topical communities and measuring editors' topical diversity. Finally, we bring the temporal and structural views together by comparing each editor's transition network with the corresponding hyperlink subnetwork using Jaccard similarity. Combining the measures allows us to distinguish three editor types: 'Specialists' are characterized by focused editing within limited topical domains and transition patterns more closely aligned with the hyperlink structure (low topical diversity, shorter mean IETs, and higher Jaccard similarity), whereas 'generalists' cover broader topics and show weaker similarity to the hyperlink structure (high topical diversity, longer mean IETs, and lower Jaccard similarity). 'Bots' show a distinct
algorithm-driven behavior, with low Jaccard similarity and the shortest mean IETs, a combination departing from human-editor patterns despite their often high topical diversity. Such findings demonstrate that the hyperlink structure is not just a static scaffold for reader
navigation, but is observationally linked to the sequential organization of editorial activity in collaborative knowledge systems.
Read the full abstract ▾
All authors Yeonji Seo, Mi Jin Lee, Seung-Woo Son, Hang-Hyun Jo, Yohsuke Murase
Instrumentation and Detectors
Photoluminescence of resin-based solder flux residue under ultraviolet excitation from 120 nm to 310 nm
Anna Hurhina, Marjolein Troost, Andreas Leonhardt et al. (+1 more)
Nuisance photoluminescence is a potential source of background in particle detectors that use noble
liquids as target material for
galactic dark matter particles and
neutrinos.
Liquid argon and xenon scintillate in the
vacuum ultraviolet (VUV) wavelength range in response to particle interactions. Photoluminescent materials that absorb these
photons can cause unexpected signals that may impede event reconstruction in these detectors. We illuminated residue from different types of commercial solder flux commonly used in
liquid xenon detectors with ultraviolet and VUV light and measured their photoluminescence spectra and intensities. We find that all tested flux residues photoluminesce in the visible spectral region when exposed to VUV light.
Read the full abstract ▾
All authors Anna Hurhina, Marjolein Troost, Andreas Leonhardt, Tina R. Pollmann
Optics
Dispersion-Engineered Terahertz Silicon Interconnects Enabling Terabit-Scale Data Links
Bodhan Chakraborty, Wenhao Wang, Nikhil Navaratna et al. (+5 more)
The rapid growth of artificial intelligence (AI) and data-centric computing is driving exabyte-scale data transfer, pushing conventional interconnect technologies toward fundamental bandwidth and energy limits. Although optical interconnects provide high-capacity and long-reach communication, their complexity and energy overhead limit scalability in short-reach chiplet-based and on-chip systems. Terahertz (THz) silicon interconnects offer a promising alternative by bridging electronics and photonics in compact, complementary metal-
oxide-
semiconductor (CMOS)-compatible platforms capable of high bandwidth and low latency. However, practical THz interconnects require simultaneous multi-band operation, dual-polarization support, low propagation loss, low group-velocity dispersion (GVD), and terabit-per-second throughput, while avoiding Bragg-induced stopbands and dispersion penalties at high frequencies. Here, we demonstrate a CMOS-compatible, centimetre-scale, multi-band on-chip THz data link achieving an aggregate throughput of 1.004 Tbps. The performance is enabled by suppressing Bragg-induced stopbands using dispersion-engineered, effective-medium-supported unclad silicon waveguides, resulting in flat transmission and low-ripple group delay across multiple THz bands. The waveguide platform operates from 220 to 500 GHz and supports both transverse-electric (TE) and transverse-
magnetic (TM) polarizations with low path loss, low bending loss, and low GVD. Fourteen channels in a straight waveguide and twelve channels in a 90$^\circ$ bend achieve aggregate data rates of 1.004 Tbps and 0.895 Tbps, respectively, with GVD as low as 0.15 ps$^2$/mm over the full operating band. These results establish a scalable and energy-efficient THz interconnect platform for high-density on-chip and chip-to-chip communication fabrics targeting next-generation AI systems and emerging 6G technologies.
Read the full abstract ▾
All authors Bodhan Chakraborty, Wenhao Wang, Nikhil Navaratna, Thomas Caiwei Tan, Pascal Szriftgiser, Hadjer Nihel Khelil, Guillaume Ducournau, Ranjan Singh
Materials Science
Learning inelastic constitutive models from stress-strain data under hard thermodynamic constraints
Filippo Masi
Machine learning approaches informed by physics have offered new insights into the discovery of constitutive models from data, helping overcome some limitations of traditional constitutive modelling while reducing the cost of otherwise computationally intensive simulations. Yet, many existing methods either enforce only part of the relevant physical and thermodynamic structure, or achieve thermodynamic consistency within specific constitutive classes, leaving open questions about their applicability across a broad range of material behaviours and their ability to generalise to unseen loading paths when limited data are available. This work establishes a thermodynamics-constrained learning framework for inelastic constitutive models from macroscopic stress-strain data. The framework is based on non-
equilibrium thermodynamics and parameterises both the free energy and the generalised transport operator governing the
evolution of the material state, while enforcing material objectivity, energy balance, and non-negative dissipation as hard, scalable constraints. Analytical
benchmarks involving simple stress-strain loading paths demonstrate that the method learns thermodynamically consistent and robust constitutive models for a range of inelastic materials of increasing complexity. At inference, the resulting models generalise to more demanding, unobserved paths and identify interpretable internal variables that capture path-dependent behaviours. The framework is then applied to granular media, prototypical heterogeneous and history-dependent materials. Trained on numerically simulated experiments based on the discrete element method, the method identifies admissible constitutive equations and predicts the response under cyclic loading, including the emergence of hysteresis absent from the training data, relying solely on macroscopic stress-strain histories.
Read the full abstract ▾