Peer Revenue Publish or profit

Papers

Fresh from arXiv, typeset properly. Highlighted words trade on the market.

Physics

Watch Physics (sign in to use)

Thursday 23 April

Applied Physics

Reconfigurable Superconducting Logic for On-Chip Photon Coincidence Detection

Scaling photonic quantum-information platforms requires arrays of superconducting nanowire single-photon detectors (SNSPDs) for feedforward control, in which optical operations are conditioned on Bell-state measurements relying on photon-coincidence detections. On-chip superconducting cryotron electronics, performing logic on detector outputs and driving optical modulators, could reduce latency and room-temperature interconnect complexity for feedforward schemes. To date, no cryotron circuits designed for this purpose have been demonstrated. We demonstrate a bias-programmable logic gate based on three nanocryotrons (nTrons) that implements selectable AND (coincidence), XOR (odd-parity), and OR functions. It operates on two electrical pulses at 4.2 K, with bit-error rates below $10^{-3}$, bias margins up to $\pm21.7\%$, and operation extending to 25 MHz over narrower bias windows. It performs coincidence and odd-parity detection on two SNSPDs' outputs with bit-error rates below $3.2 \times 10^{-2}$. As proof-of-concept, we show that nTrons can drive capacitive loads up to 1.15 V, potentially enabling compatibility with electro-optic modulators in feedforward schemes.
Read the full abstract

All authors Gabriel Le Guay, Matteo Castellani, Reed Foster, Francesca Incalza, Alejandro Simon, Owen Medeiros, Phillip D. Keathley, Karl K. Berggren

Chemical Physics

Plasmon-Exciton Coupling and Dephasing in Hybrid Au Nanostructure/J-Aggregate Systems

The coupling between propagating surface plasmon polaritons (SPPs) in Au nanostructures and the exciton transitions of cyanine dye J-aggregates has been examined using leakage radiation microscopy. Real space images of the nanostructures give the propagation lengths of the leaky SPP modes, and Fourier space images yield their dispersion curves. The dispersion curves show an avoided crossing when the structures are coated with J-aggregates, with a Rabi splitting of approximately 30 meV. The lifetimes of the coupled states were calculated by combining the measured propagation lengths with the group velocities obtained from the dispersion curves. The lifetimes decrease from ~50 fs for the bare Au nanostructures, to ~10 fs in the avoided crossing region for the coupled J-aggregate/Au nanostructure system. Analytical Holstein-Tavis-Cummings model calculations and finite element simulations of the coupled system show that the decrease in lifetime is primarily due to energy dissipation into dark states associated with the J-aggregates.
Read the full abstract

All authors Janak Bhandari, Robert Catuto, Zhumin Zhang, Bradley D. Smith, Hsing-Ta Chen, Gregory V. Hartland

Optics

Wavelength-Dependent Evolution of Full-Field Transfer Matrices in Photonic Lanterns

A fiber-based photonic lantern can couple an array of single-mode optical fibers to the guided modes of a multimode fiber, with the mapping between the single-mode fibers and guided modes fully described by a complex-valued transfer matrix. Recent experimental studies have reported strong wavelength-dependent evolution of this matrix in non-mode-selective photonic lanterns, yet a quantitative physical explanation for this behavior has not previously been demonstrated. Here, we present direct measurements of the wavelength-dependent encoding transfer matrix of a photonic lantern across the range 1525 nm to 1575 nm using off-axis holographic imaging, enabling high-fidelity recovery of both amplitude and phase. Beyond measurement, we introduce a physically grounded propagation model and numerical simulation that quantitatively reproduces the observed wavelength evolution and provides a unified physical explanation for behavior reported in prior experimental work. The model identifies differential modal phase accumulation in the multimode section as the dominant mechanism governing spectral evolution and shows that increasing the length of the multimode end systematically accelerates the phase evolution of the transfer matrix with wavelength. These results establish a direct and predictive link between photonic lantern geometry and spectral response, providing a design framework for tailoring lanterns either to enhance sensitivity to closely spaced wavelengths or to enforce uniform response over broad bandwidths for spectroscopic and imaging applications.
Read the full abstract

All authors Caleb Dobias, Miguel Römer, Swati Bhargava, Tara Crowe, Liza F. Quinn Reyes, David Smith, Matias Barzallo, Daniel Cruz-Delgado, Sergio Leon-Saval, Stephanos Yerolatsitis, Miguel A. Bandres, Stephen S. Eikenberry, Rodrigo Amezcua-Correa

Quantum Physics

Tantalum Damascene Coplanar Waveguide Resonators Fabricated Using 300 mm Scale Processes

Surface oxides contribute to losses in superconducting transmon devices resulting in degraded performance. We explore the use of the damascene process to replace the sidewall native oxide of a device with a metal/substrate interface. We simulate sidewall oxidation by burying an oxide layer during fabrication. We observe a modest improvement between the two types of devices, which is suggestive of a reduction in the surface participation ratio.
Read the full abstract

All authors Ekta Bhatia, Yingge Du, Krishna P Koirala, Chung Kow, Mingzhao Liu, Juan Macy, Tharanga R. Nanayakkara, Francisco Ponce, Satyavolu S. Papa Rao, Drew J. Rebar, Peter V. Sushko, Brent A VanDevender, Chongmin Wang, Marvin G. Warner, Zhihao Xiao

High Energy Astrophysical Phenomena

Downward ultra-high-energy neutrino detection in the air with radio antennas at ground-based observatories

Ultra-high-energy (UHE) neutrinos are unique cosmic messengers that can traverse cosmological distances unattenuated, providing direct insight into the most energetic processes in the universe. Radio detection offers significant advantages for detecting highly inclined air showers induced by UHE neutrinos. This is due to a larger exposure range compared to particle detectors, which is a result of minimal atmospheric attenuation of radio signals combined with good reconstruction precision. Furthermore, this technique improves the air shower longitudinal reconstruction, which can be used to identify neutrinos with their first interaction far below the top of the atmosphere. In this work, we present a method for identifying UHE neutrinos using ground-based radio antennas. A reconstruction algorithm is introduced based on the radio emission maximum ($X^{\text{radio}}_{\text{max}}$), which demonstrates its power in distinguishing deeply developing neutrino-induced showers from background cosmic rays. Using simulations of $\nu_e$-CC-induced air showers, we evaluate the trigger efficiency, reconstruction performance, and resulting effective area and aperture prediction for a reference array. Our results show that radio detection significantly enhances the sensitivity to very inclined showers above 1 EeV, complementing traditional surface detectors. This technique is highly scalable and applicable to future radio observatories, such as GRAND. The proposed reconstruction and identification strategy provides a pathway toward achieving the sensitivity required to detect UHE neutrinos.
Read the full abstract

Computational Physics · Cross-listed from cs.LG

Insect-inspired modular architectures as inductive biases for reinforcement learning

Most reinforcement-learning (RL) controllers used in continuous control are architecturally centralized: observations are compressed into a single latent state from which both value estimates and actions are produced. Biological control systems are often organized differently. Insects, in particular, coordinate navigation, heading stabilization, memory, and context-dependent action selection through distributed circuits rather than a single monolithic controller. Motivated by this contrast, we study an RL policy architecture that decomposes control into interacting modules for sensory encoding, heading representation, sparse associative memory, recurrent command generation, and local motor control, with a learned arbitration mechanism that allocates motor authority across modules. The model is evaluated on a two-dimensional navigation task that require simultaneous food seeking, obstacle avoidance, and predator escape. In a six-seed predator-navigation experiment trained with Proximal Policy Optimization (PPO) for 75 updates, the modular policy achieves the strongest final mean performance among the tested controllers, with final episodic return $-2798.8\pm964.4$ versus $-3778.0\pm628.1$ for a centralized gated recurrent unit (GRU) and $-4727.5\pm772.5$ for a centralized multilayer perceptron (MLP). The modular policy also attains the lowest final value loss and stable PPO optimization statistics while driving module-assignment entropy to $0.0457\pm0.0244$, indicating highly selective control allocation. These results suggest that distributed control can serve as a useful inductive bias for RL problems involving dynamically competing behavioral objectives.
Read the full abstract

High Energy Physics (Experiment)

$b\to s\ell^+\ell^- (\ell = e, \mu, \tau)$ and $b\to s\nu\bar\nu$ at Belle and Belle II

The Belle and Belle~II experiments have accumulated a combined data set of $1.2~\mathrm{ab}^{-1}$ of $e^+e^- \to B\bar{B}$ collisions at the $\Upsilon(4S)$ resonance. Owing to the clean event environment and the well-constrained initial-state kinematics, these data are particularly well suited for studying channels involving missing energy from neutrinos. This includes the reinterpretation of $B^+\to K^+\nu\bar{\nu}$ and the first inclusive measurement of $B\to X_s\nu\bar{\nu}$ with the missing energy directly from $B$ decays, as well as searches involving missing energy from $\tau$ decays, such as $B^0\to K^{*0}\tau^+\tau^-$, $B^0\to K_S^{0}\tau^+\tau^-$, and $B^+\to K^{+}\tau^+\tau^-$.
Read the full abstract

Instrumentation and Methods for Astrophysics

CCAT: Silicon-Platelet Feedhorns for Submillimeter Wavelengths

Silicon-platelet feedhorn arrays are an established technology at millimeter wavelengths that, for some applications, can provide significant advantages over traditional direct-machined metal feedhorns. The Prime-Cam focal planes operating in the 350 GHz ($\sim$860 $\mathrm{\mu}$m) and 850 GHz ($\sim$350 $\mathrm{\mu}$m) bands are anticipated to carry the first silicon-platelet feedhorn arrays to operate fully at submillimeter wavelengths, representing a significant step forward in the application of this technology. In particular, the feedhorns designed for operation in the 850 GHz band represent a 3x increase in frequency compared to previously demonstrated and deployed devices of this type. Here we present a demonstration of silicon-platelet feedhorns at these submillimeter wavelengths, including in-lab performance characterization. We present fabrication metrology, room-temperature beammaps, and cryogenic optical efficiency measurements where the feedhorns are coupled to prototype CCAT Prime-Cam detectors. We show that feedhorn performance measurements are well matched to simulation and compare that performance directly to traditional, direct-machined metal feedhorns.
Read the full abstract

All authors Jason Austermann, James Beall, James R. Burgoyne, Scott Chapman, Steve Choi, Cody J. Duell, Anthony I. Huber, Johannes Hubmayr, Matthew A. Koc, Michael D. Niemack, Joel N. Ullom, Jeffrey van Lanen, Anna Vaskuri, Michael Vissers, Jordan Wheeler

Instrumentation and Methods for Astrophysics

Large language models are not the problem

If a Large Language Model (LLM) can replicate your scientific contribution, the problem is not the LLM. What does it say about our field that so much of the anxiety about AI comes down to the fear that a machine could do what we do? Perhaps it says we should be doing something better.
Read the full abstract

High Energy Physics (Theory)

Minisuperspace Double Copy in Lifshitz Spacetimes

We develop a minisuperspace formulation of the classical double copy for anisotropic Lifshitz spacetimes in arbitrary dimension. By imposing static symmetries at the level of the action, the gravitational system reduces to an effective one-dimensional radial problem with a universal structure, in which all theory dependence is captured by a single potential. Within this framework, we identify a radial operator that reproduces the Maxwell operator for the temporal component of the single-copy field directly from the reduced gravitational dynamics, without using the equations of motion. For non-relativistic Lifshitz backgrounds, this relation is modified by an additional contribution that encodes the deviation from maximal symmetry. We show that this term has a universal origin, determined by anisotropic scaling and horizon geometry, and that it vanishes smoothly in the relativistic limit. After imposing the Hamiltonian constraint, the matter sector generates the corresponding source term, reproducing known single-copy charge densities when a Kerr–Schild description exists and extending them beyond this setting. We further demonstrate that the same mechanism persists in higher-curvature theories, where the effective potential is replaced by its higher-order generalization while preserving the operator structure. Explicit Lifshitz black hole solutions illustrate how matter content and horizon topology enter the construction. As an additional check, we verify the consistency of the formalism in the relativistic limit using a charged AdS solution in Einstein–Gauss–Bonnet gravity.
Read the full abstract

Fluid Dynamics

Conservative and skew-symmetric forms of the incompressible Navier-Stokes equations in sigma-coordinates

This study derives conservative and skew-symmetric formulations of the incompressible flow equations in a terrain-following sigma-coordinate system that preserve key structural properties of the Cartesian formulation. Unlike conventional formulations based on the direct application of the sigma-transformation to Cartesian equations, in which metric-induced terms disrupt the intrinsic structure of the governing equations, the proposed formulations are designed to avoid these structural inconsistencies. A conservative form is derived in a manner consistent with general conservation laws, and its modified eigenstructure is analyzed relative to the Cartesian counterpart. A skew-symmetric formulation is then derived by introducing a new set of variables, yielding a form that is energy-conserving for the Euler equations and energy-bounded for the Navier-Stokes equations. Finally, we discuss characteristic-based boundary conditions to ensure energy boundedness of the system.
Read the full abstract

High Energy Astrophysical Phenomena

Electromagnetic Precursors to Binary Neutron Star Mergers: Kinetic Simulations of Magnetospheric Flaring

We present the first 3D global kinetic simulations of the interacting magnetospheres of pre-merger binary neutron stars. The stars, whose magnetic moments are anti-aligned, twist the field lines connecting them, leading to periodic eruptions. Each eruption consists of an expanding magnetic flux tube with a reconnecting current sheet trailing behind it, topologically analogous to coronal mass ejections. We predict two novel classes of electromagnetic precursor signals powered by the efficient dissipation of magnetic energy in these periodically forming trailing current sheets. First, particles accelerated in the sheets produce nonthermal gamma-ray signals peaking at $\sim16\,\mathrm{MeV}$, which escape minutes to seconds before merger while the sheets are still optically thin to pair production, with modest characteristic luminosities of $L_\mathrm{obs}\gtrsim 10^{42}\,\mathrm{erg/s}$, detectable only for nearby mergers. Second, merging plasmoids in the sheets could produce fast radio burst-like transients in the final seconds before merger, with characteristic luminosities $L_\mathrm{radio}\sim 10^{38-40}\,\mathrm{erg/s}$. These coherent radio precursors would be detectable by upcoming instruments, either in untargeted surveys by wide-field instruments such as CHORD, or through targeted follow-up of gravitational-wave early-warning alerts with instruments such as DSA or SKA-mid.
Read the full abstract

All authors Jasmine Parsons, Anatoly Spitkovsky, Alexander Philippov, Hayk Hakobyan

Biological Physics

Exact Resistance of an Orifice in a 2D Membrane Blocked by a Cylindrical Obstruction

An exact solution is presented for the resistance of an orifice in a 2D membrane separating two infinitely large conductive reservoirs and obstructed by an infinitely long cylinder. The solution is obtained by constructing a curvilinear coordinate system that captures the symmetry of the obstructed system with constant-coordinate surfaces mapping the system boundaries, and by integrating the resistive contributions of infinitesimally thin equipotential slices. As commonly done when assessing the resistance of fluidic channels of finite length, the exact expression of the obstructed 2D orifice can be used as the access region of obstructed cylindrical channels and will thus find use in single molecule sensing applications.
Read the full abstract

Instrumentation and Methods for Astrophysics

Differentiable Forward Modeling for Efficient and Accurate Shear Inference

Forthcoming Stage-IV dark energy optical surveys, such as LSST, have the ambitious goal of measuring cosmological parameters at sub-percent precision. Realizing their full scientific potential requires very precise measurement of the cosmic shear signal and control of corresponding systematics. In this work, we present a modern implementation of the Bayesian shear inference framework in Schneider et al. (2015), in the case that the PSF and sky background are known. This framework automatically propagates the pixel-noise measurement error from each galaxy into the final shear estimate, and thus requires no external calibration to handle noise bias. As a first application of this new implementation, we infer the cosmic shear posterior from simulated images consisting of isolated exponential galaxies with semi-realistic noise levels. In this simplified scenario, we estimate the absolute multiplicative bias $|m|$ of our approach to be below $0.9 \times 10^{-3}\,[3\sigma]$ when the intrinsic distribution of galaxy properties is known, and below $1.3 \times 10^{-3}\,[3\sigma]$ when these distributions are inferred alongside shear. Additionally, we make progress towards the algorithm's computational feasibility in the context of modern wide-field surveys, where billions of galaxies must be processed, by leveraging differentiable forward models of galaxies, gradient-based samplers, and GPUs. Our final galaxy-fitting MCMC produces $300$ effective samples of galaxy properties in $0.45$ seconds per galaxy using a single A100 GPU. In the future, we seek to generalize our algorithm to handle selection, detection, and model shear biases so it can be applied to real survey data.
Read the full abstract

All authors Ismael Mendoza, Axel Guinot, Matthew R. Becker, Camille Avestruz, Jean-Eric Campagne, Natalia Porqueres, Michael Schneider, Eleni Tsaprazi, the LSST Dark Energy Science Collaboration

Materials Science

Spin-polarized Energy Density Method from Spin-Density Functional Theory

The energy density method is generalized to include spin polarization with the full formalism derived based on spin-density functional theory, which aims at decomposing the total energy into well-defined atomic energies. The method involves two steps: (1) decomposing the total energy into spin-polarized energy density functions in real space, and (2) integrating these energy densities over chosen gauge-invariant volumes for uniquely defined atomic energies, whose summation over all the atoms restores the DFT total energy up to a constant difference. This method is numerically implemented into the Vienna ab initio simulation package for the projector augmented-wave method, and is showcased with two applications. In the first application, we model the paramagnetic face-centered cubic Fe using spin special quasirandom structures; the spin energies are fit to spin cluster expansions and a deep neural network. In the second application, we calculate the atomic energy distributions of dilute magnetic semiconductor Ni-doped GaN with different dopant distances and spin configurations. This method extracts additional useful information for the study of magnetic systems with density functional theory.
Read the full abstract

Physics and Society

Audio Video Verbal Analysis (AVVA) for Capturing Classroom Dialogues

Background: The classroom discourse analysis has been transformed by the growing use of audio-video multimodal data, which demands analytical methods that balance interpretive depth with computational scalability. Methods: This study introduces the Audio Video Verbal Analysis (AVVA) framework, adapted from the Verbal Analysis method to integrate qualitative interpretation with quantitative modelling. Unlike fully multimodal learning analytics approaches, AVVA focuses on verbatim transcripts with essential interactional modalities. Findings: The framework embeds triangulation as a core design strategy across ten methodological steps, strengthening validity and analytical rigour. A comprehensive validation scheme addresses fundamental challenges in temporal observational research: Phi Ceiling for low-frequency variables (via Base Rate Filtering), estimation uncertainty (via bootstrap confidence intervals), and the Modifiable Temporal Unit Problem, where measured associations depend on observational window size. Four-criterion stability assessment (sign consistency, confidence interval overlap, zero exclusion, magnitude stability) classifies variable pairs into interpretable patterns: grain-invariant, scale-specific, or multi-scale, etc. structures across temporal grain sizes. Its application to 23 hours of classroom recordings illustrates its practical viability and its potential to yield meaningful insights. Contribution: The framework thus provides a scalable pathway for transforming rich classroom discourse into analysable datasets.
Read the full abstract

Optics

Nanophotonic control of collective many-body states in Kerr solitons

Spatially periodic systems of coupled bosons are governed by on-site interactions and tunneling between sites, opening a rich phase space of many-body behavior. Here, we explore nanophotonic control of collective many-body light states in a driven-dissipative Kerr microresonator. We demonstrate a non-equilibrium Mott insulator to superfluid transition that arises from the interplay of spatially local Kerr interactions that generate and mediate interference among discrete frequency modes. A photonic-crystal (PhC) lattice bandgap inscribed on the resonator controls linear mode coupling while preserving self-mode Kerr interactions. By increasing the PhC bandgap, we suppress nonlinear cross-mode coupling to access the Mott-insulator phase, wherein the soliton spectrum forms a flattop frequency comb with large and uniform power per mode. In contrast, reducing the PhC bandgap restores cross-mode coupling and drives a delocalized superfluid regime characterized by long-range phase coherence and a spectrum with non-uniform power distribution. Our work shows that many-body physics creates collective states in driven-dissipative systems, enabling advances in programmable photonics and quantum-optical computing.
Read the full abstract

All authors Yan Jin, Jizhao Zang, Sarang Yeola, Alexa R. Carollo, Nitesh Chauhan, Scott B. Papp

Materials Science

Carrier scattering considerations and thermoelectric power factors of half-Heuslers

The electronic and thermoelectric (TE) transport properties of 13 n-type and p-type half-Heusler alloys are computationally examined using Boltzmann transport. The electronic scattering times resulting from all relevant phonon interactions and ionized impurity scattering (IIS) are fully accounted for using ab initio extracted parameters. We find that at room temperature the average peak TE power factors (PF) of all materials we examine reside between 5 and 10 mW/mK$^2$. We also find that IIS in combination with the long range polar optical phonon (POP) scattering are more influential in determining the electronic transport and PF over all other non-polar phonon interactions (acoustic and optical phonon transport). In fact, the combination of POP and IIS determines the thermoelectric power factor of the half-Heuslers examined on average by about 65%. The results highlight the crucial impact of Coulombic scattering process (POP and IIS) on the TE properties of half-Heusler alloys and provide profound insight for understanding transport, which can be applied widely in other complex bandstructure materials. In terms of computation expense, the computationally cheaper POP and IIS provide an acceptable first-order estimate of the power factor of these materials, while the non-polar contributions, which require more expensive ab initio calculations, could be of secondary importance.
Read the full abstract

All authors Rajeev Dutt, Bhawna Sahni, Yao Zhao, Yuji Go, Saff E Awal Akhtar, Ankit Kumar, Sumit Kukreti, Patrizio Graziosi, Zhen Li, Neophytos Neophytou

Strongly Correlated Electrons

Apparent Planckian scattering from local polaron formation

We propose a simple mechanism for apparent Planckian scattering based on local polaron formation, in which $\Gamma_\text{tr} = \Gamma_0 + \alpha k_BT / \hbar$ with $\alpha \sim O(1)$ emerges from quasielastic scattering without fine tuning. We provide evidence for our proposal in Monte Carlo simulations of the Holstein model with disordered electron-phonon coupling in the adiabatic limit. Our mechanism generates a finite interval of couplings in which the slope $\alpha$ is approximately constant, coinciding with the onset of local polaron formation. In this regime, Matthiessen's rule is dramatically violated (or obeyed, depending on one's point of view) in that changes to the couplings, which in perturbation theory would alter the slope $\alpha$, instead change the intercept $\Gamma_0$. We conjecture that a version of our mechanism applies to any system with a dominant disordered interaction that can drive polaron formation. This potentially includes regimes of several recently introduced strange metal models based on spatially random interactions.
Read the full abstract

Biological Physics

Mitochondrial mechanics nucleates axonal jamming and swelling

Neuronal function requires precise spatial organization of mitochondria to meet localized energetic demand. However, the physical constraints governing mitochondrial transport in axons remain poorly defined. Bidirectional motor-driven trafficking inherently introduces the potential for collisions, but the implications of these interactions for transport failure and structural damage are not understood. Here, we develop an agent-based model that couples mitochondrial motility, morphology, and lifecycle dynamics to a deformable axonal boundary. We show that mitochondrial traffic jams emerge from a force balance between active propulsion and steric interactions, and that their severity is governed by organelle shape and mechanical properties. Elongated, mechanically rigid mitochondria remain aligned and are transported rapidly, whereas flexible, low-aspect-ratio mitochondria are prone to jamming and accumulation. Incorporating fission and fusion dynamics reveals that fission amplifies transport disruption by generating collision-prone populations, while fusion restores transport by producing anisotropic structures that navigate crowded environments more efficiently. Importantly, we find that sustained jamming generates mechanical stress on the axonal membrane, leading to deformation and swelling. Together, these results establish a physical framework linking mitochondrial dynamics to axonal integrity and provide testable predictions for how dysregulated fission-fusion balance can drive transport failure and structural pathology in neurons.
Read the full abstract

All authors Patrick S. Noerr, Ahmed A. Abushawish, Gulcin Pekkurnaz, Padmini Rangamani

Instrumentation and Methods for Astrophysics

Understanding HWO's Field of Regard and Characterization Requirement Trade Space with a Dynamic Observation Scheduling Algorithm

The Habitable Worlds Observatory (HWO) aims to image and characterize at least 25 ExoEarth candidates (EECs). Achieving this goal requires a detailed understanding of the observatory's design trade space, including the operational efficiency of the EEC survey. This study quantifies the impact of two critical parameters: the instantaneous field of regard (FoR) and the number of characterization observations required per EEC ($N_\text{char}$). We introduce a novel dynamic scheduling algorithm implemented within the EXOSIMS framework that models information gain during the mission. The scheduler models the orbital information known about each planet and forecasts detection probabilities to make scheduling decisions. We explore a multi-dimensional trade space, varying aperture size (6.5 m and 8.0 m), dedicated EEC survey time (2.5, 5.0, 7.5 years), $N_\text{char}$ (1 to 4), and FoR ($15^\circ$ to $135^\circ$). Our results demonstrate that the FoR is a major driver of the mission yield, with the yield decreasing significantly when the FoR is less than $90^\circ$. We find that increasing $N_\text{char}$ imposes a significant cost to mission yield, as each additional characterization required reduces yield by approximately 22%. The cumulative impact of requiring four characterizations instead of one lowers the yield by approximately 52%. This harsh penalty can be partially mitigated by increasing the survey duration. The relative yield loss when increasing $N_\text{char}$ from 1 to 2 is 38% for a 2.5 year survey and 14% for a 7.5 year survey. Our results highlight the complex interactions between HWO's engineering constraints and science requirements, and emphasize that the EEC survey efficiency is a critical component of HWO's design space.
Read the full abstract

All authors Corey Spohn, Christopher C. Stark, Dmitry Savransky, Natasha Latouf

Quantum Physics

Entanglement and information scrambling in long-range measurement-only circuits

Measurement-only circuits provide a minimal setting in which repeated local projections can either generate or suppress many-body entanglement, giving rise to measurement-induced phase transitions and dynamical regimes, that might have no unitary counterpart. Here we investigate entanglement and information transitions in one-dimensional measurement-only Clifford circuits with long-range two-qubit parity checks. By tuning both the measurement range and density per layer, we uncover a broad set of phases whose classification requires probes beyond entanglement entropy, such as mutual information, tripartite mutual information, purification from an ancilla, and Bell-cluster statistics. We map phase diagrams using large-scale Clifford simulations for two protocols: a random-basis design in which each measurement is randomly chosen from $\lbrace XX,YY,ZZ \rbrace$, and a single-basis design in which the basis is fixed within each layer but varies between layers, hence introducing more structure to the circuit. We map the trajectory-averaged entanglement entropy to a two-dimensional statistical mechanics model by extending a replica-based method to random-basis measurement-only circuits, and show that a continuous-time limit yields an effective long-range XX hamiltonian in the steady state. This connection links the observed volume-law to sub-volume-law entanglement transition to the boundary between a continuous symmetry broken phase and a critical XY phase. Strikingly, in structured (single-basis) circuits we find a phase in which volume-law and long-range entanglement coexists with rapid, size-independent purification of an ancilla qubit, and the absence of scrambling, highlighting measurement-only circuits as a promising route to efficiently preparing highly entangled and technologically useful quantum states.
Read the full abstract

All authors Abigail McClain Gomez, Fiona Abney-McPeek, Hong-Ye Hu, Susanne F. Yelin, Ceren B. Dağ

General Relativity and Quantum Cosmology

Data-Driven Acceleration of Eccentricity Reduction for Binary Black Hole Simulations

Reducing orbital eccentricity in numerical relativity simulations of binary black holes is essential for producing astrophysically relevant gravitational wave models, as many of these systems are expected to be near-circular in nature. Standard eccentricity reduction procedures rely on iterative schemes, often requiring four or more trial simulations to achieve desired thresholds. This approach is computationally expensive because each trial simulation adds ~10% to the total simulation run time of multiple weeks to months. We introduce a data-driven approach that accelerates this process by learning the values of the initial orbital frequency, Omega_0, and radial velocity, adot_0, that yield an evolution with small eccentricity. This is done using a Gaussian Process Regression model trained on an archive of previously eccentricity-reduced numerical relativity simulations. For all configurations tested, using the trained model consistently reduces the number of required eccentricity reduction iterations to just zero or one, significantly lowering computational costs relative to post-Newtonian initial guesses. These results demonstrate the power of data-driven methods in accelerating expensive numerical relativity simulations.
Read the full abstract

All authors Vittoria Tommasini, Nils L. Vu, Mark A. Scheel, Saul A. Teukolsky

Materials Science

How Electrons Become Mobile in a Colossal Dielectric – Fe$_2$TiO$_5$

We measure the colossal permittivity in single crystal Fe$_2$TiO$_5$ using broadband spectroscopy in the frequency range 20 Hz - 1 MHz. The relaxation response is analyzed using a Debye-like model with Arrhenius activation in two different ways and yields an energy barrier of 286.1 $\pm$ 2.8 meV. DC transport yields an activation energy of 288.8 $\pm$ 2.8 meV. These results strongly imply that the energy barrier for localized dipole motion and itinerant charge transport originate from the same atom-level forces. A further implication is that colossal dielectric behavior is a microscopic bulk phenomenon arising from a system on brink of metallicity.
Read the full abstract

Astrophysics of Galaxies

An Extended Parametric Model for Self-interacting Dark Matter Halos

We improve upon the parametric model for the evolution of the density profiles of self-interacting dark matter (SIDM) halos introduced in Yang et al. (2024b), by considering the effects of mass accretion on a SIDM halo's gravothermal evolution. The original parametric model accurately predicts parameters $V_{\max}$ and $R_{\max}$, but with a tendency to overpredict $V_{\max}$ at $z=0$ for a subset of field halos. This discrepancy results from the parametric model predicting a faster rate of gravothermal evolution for these field halos compared to that measured in cosmological zoom-in simulations. We propose that the effects of mass accretion on the evolution of SIDM halos are not fully captured by the original parametric model. Our extended parametric model assumes that smooth mass accretion delays core-collapse by driving the SIDM halo back toward a Navarro-Frenk-White (NFW) profile (as it would have in the case of cold dark matter). We find that this extended model is able to substantially reduce the error in predicted $V_{\max}$ for halos compared to the original model, providing a more accurate model of SIDM halo evolution.
Read the full abstract

Solar and Stellar Astrophysics

A SPHEREx Pipeline and Spectral Library for Ultracool Dwarfs

We present a Python spectrophotometry extraction tool tailored for fast-moving point sources detected in the SPHEREx mission, and use it to construct a set of 0.75-5.0 $\mu$m low-resolution ($\lambda/\Delta\lambda \sim 50$) spectrophotometry data products based on the SPHEREx Quick Release 2 (QR2) for a set of 6003 L0-Y1 ultracool dwarfs: 2050 known ultracool dwarfs, 3008 known photometric ultracool dwarf candidates, and 947 newly identified ultracool dwarfs. This work more than doubles the number of ultracool dwarfs with spectroscopy, from 3449 to 7402. We provide SPHEREx templates for each spectral subtype and a set of tools to assign automated spectral types. The QR2 data release generates spectrophotometry with an average signal-to-noise per spectral channel above $\sim$10 for most objects with WISE W2 magnitudes of 14.0 mag and brighter. The compiled data set is made available publicly at https://mocadb.ca, where new spectral compilations from future data releases will also be made available as they are published. These new data provide a significant increase in the number of substellar objects for which the 2.4-5.0 $\mu$m window is now accessible, making it possible to probe important molecular chemistry of key CNOS-bearing species for the coolest brown dwarfs. We flag 2668 ultracool dwarfs as candidate young brown dwarfs, 250 as candidate subdwarfs, and 865 as possibly otherwise peculiar for future investigation. The SPIFF library presented here opens the doors to efficient confirmation of candidate substellar objects and follow-up studies of population-level atmospheric properties of cold brown dwarfs.
Read the full abstract

All authors Jonathan Gagné, Jacqueline K. Faherty, Azul Ruiz Diaz, Louis-Philippe Coulombe, Thomas P. Bickle, Adam C. Schneider, J. Davy Kirkpatrick, Marc J. Kuchner, Aaron M. Meisner, Dan Caselden, Adam J. Burgasser, Sarah Casewell, Easton J. Honaker, Frank Kiwy, Federico Marocco, Daniella C. Bardalez Gagliuffi, Nikolaj Stevnbak Andersen, Lizzeth Ruiz Arroyo, Bruce Baller, Paul Beaulieu, John Bell, Martin Bilsing, Troy K. Bohling, Guillaume Colin, Giovanni Colombo, Sam Deen, Alexandru Dereveanco, Kevin Dixon, Hugo A. Durantini Luca, Deiby Flores, Christoph Franck, Christopher Fulvi, Michael Gallmann, Jean Marc Gantier, Konstantin Glebov, Léopold Gramaize, Leslie K. Hamlet, Ken Hinckley, Kevin Jablonski, Peter A. Jałowiczor, Martin Kabatnik, Peter Kasprowitz, K Ly, David W. Martin, Naoufel Marzak, Alexander McColgan, Neil J. McEwan, Marianne N. Michaels, William Pendrill, Stéphane Perlin, Ben Pumphrey, James Rabe, Henry Raway, Walter Ruben Robledo, David Roser, Animesh Roy, Arttu Sainio, Vincent Schindler, Manfred Schonau, Jö rg Schümann, Karl Selg-Mann, Andrea Serio, Patrick Smith, Andres Stenner, Christopher Tanner, Melina Thévenot, Vinod Thakur, Mayahuel Torres Guerrero, Maurizio Ventura, Nikita V. Voloshin, Jim Walla, Zbigniew Wȩdracki, Bailey Weyandt, Breck Wilhite, Spartacus Zitouni

Fluid Dynamics

Lagrangian Proper Orthogonal Decomposition

We introduce a modal representation for Lagrangian trajectories in turbulence, termed Lagrangian Proper Orthogonal Decomposition (LPOD). An ensemble of particle trajectories is used to construct velocity time series, which are normalized independently for each trajectory to isolate fluctuations. Principal Component Analysis is then applied to the resulting dataset, with temporal instances defining the feature space. The method is tested on trajectories from both direct numerical simulations of homogeneous isotropic turbulence and three-dimensional particle-tracking experiments, showing that the leading modes exhibit similar structures and energy distributions in both cases. Truncated reconstructions are obtained by combining modes and coefficients, rescaling the fluctuations, and integrating in time. For trajectories of the order of the integral time scale, single-particle dispersion and curvature statistics are accurately reproduced using a limited number of modes (c.a. 10), whereas capturing the tails of acceleration distributions requires a larger set (c.a. 30-60). Longer trajectories require progressively more modes for accurate reconstruction. These results suggest a possible route to data-driven generation of synthetic particle trajectories via stochastic sampling of the modal Lagrangian dynamics.
Read the full abstract

Quantum Physics

Expansion of time-convolutionless non-Markovian quantum master equations: A case study using the Fano-Anderson model

We explore the performance of the time-convolutionless (TCL) projection operator technique using the Fano-Anderson model as a test case. Comparing the exact TCL master equation with an expansion in powers of the strength of the system-environment coupling, we analyze the transient dynamics as well as the steady-state behavior. For a Lorentzian spectral density we demonstrate that the dimensionless expansion parameter corresponds to the ratio of the environmental correlation time to the relaxation time of the system, and we derive the convergence radius for the TCL expansion, which is seen to depend on the ratio of detuning and width of the spectral density. We further study the quantum non-Markovianity of the model based on the evolution of the Bures distance between quantum states and how it is represented by the second and fourth order of the expansion. Our results highlight both the strengths and the limitations of the TCL formalism in capturing key features of open quantum systems and, in particular, the challenges of accurately describing strongly coupled systems and non-Markovian dynamics.
Read the full abstract

High Energy Physics (Theory)

Black Hole Response Theory and its Exact Shockwave Limit

We present a black hole response formalism formulated within the worldline approach to the classical gravitational two-body problem. The central objects are response functions: a hierarchy of correlators that encode, successively, the black hole's own gravitational field, the scattering of a gravitational wave off of the black-hole including recoil, and the nonlinear response to multiple gravitational perturbations. These functions serve as the natural building blocks for a systematic diagrammatic expansion in the mass ratio of a binary, the gravitational self-force expansion (SF), employing the worldline quantum field theory (WQFT) formalism. As a first application we treat an ultra-relativistic black hole, whose field is the Aichelburg-Sexl shockwave. We show that our framework reproduces the exact shockwave geometry and the trajectories of probes crossing it. Our main result is the scattering of a gravitational wave off the shockwave, computed exactly in Newton's constant by resumming the full post-Minkowskian (PM) perturbative series, which we compute for off-shell gravitons enabling later use in the SF expansion. The exact on-shell answer takes a strikingly compact form: the leading-order result is dressed by an overall phase that captures the expected infrared (Weinberg) behaviour together with a Coulomb-like scattering phase. Our results provide the basic WQFT ingredients for future 1SF computations of observables such as the impulse and waveform in the ultra high-energy regime.
Read the full abstract

All authors Lara Bohnenblust, Carl Jordan Eriksen, Jitze Hoogeveen, Gustav Uhre Jakobsen, Jan Plefka

Physics Education

A Reproducible Inertia Dynamometer for Vocational Schools: Design, Fabrication, and Pedagogy

We report the design, construction, and classroom use of an inertia dynamometer, built as a year-long project-based learning (PBL) activity with adult students at a Greek Evening Vocational High School (EPAL). The apparatus consists of a machined steel drum of calculated moment of inertia $I = 0.6507~\mathrm{kg\,m^2}$, mounted on a student-welded frame and instrumented with a green-laser / light-dependent resistor (LDR) optical interrupter. The analogue output is sampled at 44.1\,kHz by the microphone input of a laptop computer, which is used as an opportunistic analogue-to-digital converter; torque and power curves are then reconstructed in software from the inter-pulse intervals via $\tau = I\alpha$ and $P = \tau\omega$. The drum's moment of inertia is cross-checked by an inclined-plane rolling experiment. A wide-open-throttle test with a 50\,cc scooter reproduces the expected flat-power / falling-torque signature of a continuously variable transmission in the low-to-moderate RPM range; the LDR's millisecond-scale recovery time imposes an upper bandwidth limit that provides an unplanned but pedagogically rich lesson in sensor physics. The project integrated industrial-lathe fabrication, arc welding, analogue electronics, and numerical differentiation into a single coherent workflow. We describe the apparatus, the physics, the signal-processing pipeline (for which MATLAB and Python/Octave code are provided as supplementary material), and reflect on the pedagogical outcomes for a student population traditionally disengaged from abstract physics.
Read the full abstract