High Energy Astrophysical Phenomena
XRISM High-Resolution X-ray Spectroscopy of Cygnus X-1 – highly ionized Iron absorption structures
Shinya Yamada, Natalie Hell, Elisa Costantini et al. (+18 more)
We present the first high-resolution X-ray spectral analysis of Cygnus X-1 using XRISM. The observation was carried out from April 7 to 10, 2024, covering the orbital phase range 0.65–0.17 during its low/hard state. Taking advantage of the exceptional energy resolution of the Resolve instrument, we examined highly ionized iron absorption lines and characterized the ionization states, column densities, and line-of-sight velocities of the absorbing
plasma. Spectral analysis revealed an ionization parameter of approximately 3, column densities of a few times 10^21 cm^-2, and a blueshifted velocity of approximately 100 km s^-1. The observation was divided into two phases: before and after orbital phase phi_orb = 0.9, corresponding to non-dipping and dipping intervals. While only weak absorption features were present before phi_orb = 0.9, strong absorption by He-like and H-like Fe appeared during the dipping phase. We measured equivalent widths of 2.3 eV, 0.4 eV, and 1.2 eV for He-like Fe K-alpha, and H-like Ly-alpha1 and Ly-alpha2, respectively, demonstrating the capability of XRISM Resolve to securely detect narrow absorption features of only a few eV. These measurements trace the motion of the absorbing material and offer insight into the kinematics and spatial distribution of the wind in the vicinity of the black hole. These findings enhance our understanding of wind-fed
accretion in Cygnus X-1 and highlight the importance of continued high-resolution X-ray observations to further constrain the physical properties of winds and
accretion flows in high-mass X-ray binaries.
Read the full abstract ▾
All authors Shinya Yamada, Natalie Hell, Elisa Costantini, Oluwashina Adegoke, McKinley Brumback, Paul Draghis, Ken Ebisawa, Javier A. Garcia, Edmund Hodges-Kluck, Shunji Kitamoto, Shogo Kobayashi, Takayoshi Kohmura, Aya Kubota, Jon M. Miller, Misaki Mizumoto, Tsunefumi Mizuno, Kaito Ninoyu, Hiromitsu Takahashi, Yuusuke Uchida, Kazutaka Yamaoka, Sixuan Zhang
Materials Science
Data-Driven Thermal and Mechanical Modeling of Defective Covalent Organic Frameworks
Aleksander Szewczyk, Leonardo Medrano Sandonas, David Bodesheim et al. (+2 more)
Covalent Organic Frameworks (COFs) are versatile two-dimensional (2D) materials for flexible electronics, catalysis, and sensing, owing to their tunable architectures and large surface areas. However, like most materials, COFs inevitably contain synthesis-induced defects, which-similar to
graphene-can strongly influence intrinsic properties, such as thermal transport and mechanical strength. To address this challenge, we have assessed the performance of a set of machine learning interatomic potentials (MLIP) capable of efficient large-scale simulations of COFs with
quantum accuracy. In doing so, QCOF models (
Quantum COF) were developed by tuning the state-of-the-art MACE architecture on an extensive
dataset of non-
equilibrium COF conformations generated from high-fidelity density functional theory calculations. The accuracy, computational efficiency,
memory footprint, and transferability to unseen chemical environments of these models were benchmarked against general-purpose MACE models and their fine-tuned variants. Our results show that an invariant QCOF model with a small descriptor dimensionality and cutoff outperforms all other models in most validation tasks, including scalability to large systems, force prediction in defective COFs, and
phonon dispersion calculations. The best-performing QCOF model was then used to run large-scale simulations of thermal conductivity for defective CTF-1 and COF-LZU1 systems via non-
equilibrium MD, revealing a more pronounced sensitivity of CTF-1 to structural defects. Stress-strain curves were also investigated, showing that the mechanical response remains nearly invariant at low defect densities, while asymmetric behaviour emerges at large strains. This work thus provides a foundation for the design of robust
quantum-informed MLIP for large-scale property simulations of defective of extended network materials.
Read the full abstract ▾
All authors Aleksander Szewczyk, Leonardo Medrano Sandonas, David Bodesheim, Bohayra Mortazavi, Gianaurelio Cuniberti
Astrophysics of Galaxies
Signatures of Very Massive Stars in the Epoch of Reionization
Rui Marques-Chaves, Fabrice Martins, Daniel Schaerer et al. (+2 more)
We present ultra-deep ($\simeq 20-30$ hours), rest-frame UV spectroscopy with NIRSpec/JWST of two UV-bright
galaxies at $z\sim 8.7$, CEERS-1019 and CEERS-1025 ($Z_{\rm neb} \simeq 0.1 Z_{\odot}$), obtained as part of the JWST Cycle 4 SPURS large program. The spectra reveal exceptionally strong P-Cygni profiles in wind lines (NV $\lambda$1240 and CIV $\lambda$1550) and significant broad and strong HeII $\lambda$1640 emission ($\rm EW\simeq 2-4$ A). We compare the observations with synthetic
stellar population models at $Z_{\star} \simeq 0.1 Z_{\odot}$, both including and excluding very massive
stars (VMS). Models including VMS provide a markedly improved fit to the data relative to non-VMS models ($\Delta$AIC and $\Delta$BIC $> 70$), which fail to reproduce the observed strengths of the wind features. A comparison with empirical spectra of VMS-dominated systems in the local Universe further supports this interpretation. The best-fit VMS models imply extremely young ages of the
stellar populations ($\simeq 1.5-2.0$Myr) and high ionizing
photon production efficiencies ($\log \xi_{\rm ion} [\rm Hz erg^{-1}] \gtrsim 25.8$), exceeding those inferred from non-VMS models by $\sim 0.1-0.2$ dex. These results provide evidence for an overabundance of VMS at high-$z$ with an IMF extending well beyond $100 M_{\odot}$, and highlight their potential role in shaping the rest-frame UV spectra, chemical enrichment, and ionizing output of
galaxies in the early Universe.
Read the full abstract ▾
All authors Rui Marques-Chaves, Fabrice Martins, Daniel Schaerer, Miroslava Dessauges-Zavadsky, Ana Palacios
High Energy Physics (Phenomenology)
Solving Cosmological Puzzles using Finite Temperature $\nu$SMEFT
Debajyoti Choudhury, Jaydeb Das and Tripurari Srivastava
We study a minimal framework that naturally yields viable Dark Matter, a strong first-order electroweak phase transition and low-scale resonant leptogenesis. Augmenting the Standard Model with three heavy Majorana
neutrinos, we study the corresponding
neutrino-extended Standard Model Effective Field Theory, including operators upto mass-dimension six. The pure
Higgs operator provides the dominant enhancement required for a strong first-order electroweak phase transition, while the remaining operators yield subleading effects consistent with electroweak precision constraints. The signal for the
stochastic gravitational-wave background is dominated by sound waves in the
plasma, with magnetohydrodynamic
turbulence providing a subleading contribution. Low-scale resonant leptogenesis is realized through tiny mass splittings among quasi-degenerate heavy
neutrinos, dynamically generated in the symmetric phase by the combined effect of one-loop RG-induced corrections and finite-temperature contributions. Solving the Boltzmann equations, we show that the observed
baryon asymmetry of the Universe can be reproduced while remaining consistent with
neutrino oscillation data and charged-
lepton-
flavor-violation constraints. One of the heavy
neutrinos is stabilized by a discrete
symmetry thereby acting as a fermionic dark matter candidate. Its interactions with the Standard Model arise from dimension-five and dimension-six effective operators, leading to viable annihilation, elastic scattering, and indirect detection phenomenology compatible with current experimental bounds. The dark matter sector remains decoupled from the dynamics of the electroweak phase transition and leptogenesis, allowing all three phenomena to be consistently realized within a unified effective field theory framework.
Read the full abstract ▾
Cosmology and Nongalactic Astrophysics
Impact of the Infrared Cutoff on Structure Formation in Tsallis Holographic Dark Energy
Biswajit Das
We investigate the viability of Tsallis
holographic dark energy (THDE) models, focusing on the role of the infrared (IR) cutoff in the growth of
cosmic structures. Considering two commonly used choices of the cutoff, the particle horizon and the future event horizon, we analyze the
evolution of linear matter perturbations and compute the growth factor, growth rate, and the observable $f\sigma_8(z)$. These predictions are compared with observational data from
redshift-space distortion measurements. We find that the growth history is highly sensitive to the choice of IR cutoff. Models based on the future event horizon are consistent with observational data and can provide a fit comparable to, or slightly better than, the $\Lambda$CDM model for suitable values of the Tsallis parameter $\delta$. In contrast, models constructed using the particle horizon generally fail to reproduce the observed growth of structure. These results demonstrate that the viability of THDE models depends crucially on the choice of IR cutoff and highlight the importance of structure formation as a stringent test of generalized
holographic dark energy scenarios.
Read the full abstract ▾
Materials Science
Intertwined charge density wave, tunable anti-dome superconductivity, and topological states in kagome metal VSn
Shu-Xiang Qiao, Ya-Ping Li, Jie Zhang et al. (+5 more)
These years, kagome materials with 1:1 stoichiometry have garnered increasing
attention, among which FeSn, CoSn, and FeGe have been the focus of current studies. However, all of them are
antiferromagnetic, thereby hindering the observation of superconductivity and other novel physical properties. Here, we predict a novel 1:1 kagome metal VSn, which is an intrinsic charge density wave (CDW) material. Interestingly, with increasing pressure or doping concentration, the CDW order is progressively suppressed, followed by the emergence of superconductivity characterized by a non-monotonic transition temperature that exhibits a rare anti-dome-shaped dependence. Above a critical threshold, a reentrance of the CDW phase occurs. The anti-dome superconductivity originates from the first hardening and then softening of
phonon modes, together with band reconstruction. Crucially, VSn retains nontrivial topological properties across the entire superconducting regime, a feature of paramount importance for realizing robust topological superconductivity. These intertwined CDW, superconductivity, and topological phenomena elucidate the correlations among multiple
quantum states in VSn. Therefore, this research paves the way for for designing 1:1 kagome superconducting topological metals and establishes a platform for exploring the interplay of multiple phases in kagome systems.
Read the full abstract ▾
All authors Shu-Xiang Qiao, Ya-Ping Li, Jie Zhang, Yi Wan, Na Jiao, Meng-Meng Zheng, Hong-Yan Lu, Ping Zhang
Materials Science · Cross-listed from eess.SY
Monolithically Integrated VO$_2$ Mott Oscillators for Energy-Efficient Spiking Neurons
Fabio Bersano, Cyrille Masserey, Vanessa Conti et al. (+6 more)
Brain-inspired non-Boolean computing and sensing enable energy-efficient, error-tolerant, and highly parallel information processing, yet their deployment remains limited by the lack of compact, scalable spiking hardware. Mott phase-transition materials offer a promising route because their abrupt
insulator-to-metal transitions enable
neuron-like thresholding and oscillations. Among them, vanadium dioxide (VO$_2$) is particularly attractive owing to its near-room-temperature transition, fast switching, and scalability. However, existing VO$_2$ neuristors rely on discrete components, limiting integration density. Here, we report monolithic back-end-of-the-line (BEOL) integration of one-transistor-one-VO$_2$-memristor (1T-1MR) spiking
neurons on a CMOS-compatible platform. VO$_2$ nanosheets are fabricated by pulsed-
laser deposition atop dielectrically isolated silicon-on-
insulator (SOI) p-type junctionless field-effect transistors (JLFETs) below 430 $^\circ$C. The architecture exhibits gate-tunable oscillations from 40 to 410 kHz in 60 nm-thin VO$_2$ devices with a 6 $\mu$m$^2$ active area, achieving 18 pJ per spike and 8 $\mu$W at room temperature, with potential for sub-3 $\mu$W operation. We uncover a non-monotonic dependence of oscillation frequency on bias current and temperature and analyze bias-dependent
stochastic firing, revealing the nonlinear physics of integrated VO$_2$ thin-film memristors. Finally, we demonstrate voltage-controlled oscillator functionality and on-chip resistive coupling between two nano-oscillators mediated by a JLFET. These results establish a pathway toward dense, energy-efficient, monolithically integrated Mott neuromorphic hardware compatible with future computing and spiking sensing systems.
Read the full abstract ▾
All authors Fabio Bersano, Cyrille Masserey, Vanessa Conti, Andrea Iaconeta, Niccolo' Martinolli, Ehsan Ansari, Anna Varini, Igor Stolichnov, Adrian Mihai Ionescu
Optics
Designing interferometers within a single optical beam
Bereneice Sephton, Rakhi Thomas, Carlo Schiano et al. (+8 more)
Interferometry provides highly sensitive access to optical phase and is central to much of modern metrology and phase imaging methods. Conventional implementations, however, often face trade-offs between mechanical stability and experimental or computational complexity. Here, we present a general framework for designing custom interferometers within a single optical beam by exploiting structured light. This approach yields compact, robust common-path configurations that bypass the need for complex post-processing and can easily be integrated into existing setups. We demonstrate the versatility of this concept by designing a range of interferometers, each tailored by the structured mode, and implement them through active and passive modal conversion optics, proving its adaptability to different experimental requirements. To showcase the practical utility of our framework, we apply it to quantitative phase imaging over a variety of physical samples, showing excellent agreement with atomic force microscopy
benchmarks. Furthermore, we emphasise the flexibility of our structured light interferometers by mapping phase objects to a choice of either amplitude or polarisation, the latter providing a direct route toward real-time phase-
retrieval. This cost-effective approach offers a practical, high-throughput solution for phase-sensitive metrology across fields such as fundamental physics, biology, and material science.
Read the full abstract ▾
All authors Bereneice Sephton, Rakhi Thomas, Carlo Schiano, Francesco Reda, I Komang Januariyasa, Filippo Cardano, Bruno Piccirillo, Marcella Salvatore, Stefano Luigi Oscurato, Corrado de Lisio, Vincenzo D'Ambrosio
Lattice Field Theory
Reconstructing the full kinematic dependence of GPDs from pseudo-distributions
Hervé Dutrieux, Robert G. Edwards, Joe Karpie et al. (+7 more)
We propose a reconstruction of the full $(x, \xi, t)$ dependence of unpolarized isovector
proton generalized parton distributions (GPDs) $H^{u-d}$ and $E^{u-d}$ from
lattice QCD data in the pseudo-distribution formalism. For the first time, we extract double distributions (DDs) directly from
lattice data, enforcing therefore an important property of GPDs linked to Lorentz
symmetry. We use the flexible framework of multidimensional Gaussian process regression to regularize the inverse problem and present an assessment of the impact of model dependence on the systematic uncertainty. Our
lattice ensemble corresponds to a pion mass $m_\pi = 358$~MeV and a
lattice spacing $a = 0.094$~fm. We use larger
hadron momenta, up to 2.7~GeV, and kinematic coverage compared to our previous computations and extract additional skewness-dependent moments of the GPD.
Read the full abstract ▾
All authors Hervé Dutrieux, Robert G. Edwards, Joe Karpie, Cédric Mezrag, Christopher Monahan, Kostas Orginos, Anatoly Radyushkin, David Richards, Eloy Romero, Savvas Zafeiropoulos
Quantum Physics
Photonic Quantum Computing on Spin Memory Architecture with Tree-Encoded Fusion
Xiangyu Ren, Yuexun Huang, Zhemin Zhang et al. (+4 more)
Photonic
quantum computing provides a promising route toward
quantum computation by naturally supporting the measurement-based
quantum computation (MBQC) model. In MBQC, programs are executed through measurements on a pre-generated graph state, whose construction largely depends on probabilistic fusion operations. However, fusion operations in PQC are vulnerable to two major error sources: fusion failure and fusion erasure. As a result, MBQC compilation must account for both error mechanisms to generate reliable and efficient photonic executions. Prior state-of-the-art MBQC compilation, represented by OneAdapt, is designed for all-photonic architectures and mainly focuses on handling fusion failures. Nevertheless, it does not explicitly model fusion erasures induced by
photon loss, which can be substantially more damaging than fusion failures. To mitigate fusion erasure errors, we introduce a new MBQC compilation scheme built upon the
spin qubit quantum memory. We propose tree-encoded fusion, an encoding strategy that suppresses erasure errors during graph-state generation. We further incorporate this scheme into a compiler framework with
algorithms that reduce the execution overhead of
quantum programs. We evaluate the proposed framework using a realistic PQC simulator on six representative
quantum algorithm benchmarks across multiple program scales. The results show that tree-encoded fusion achieves better robustness than alternative fusion-encoding strategies, and that our compiler provides exponential improvement over OneAdapt. In addition, we validate the feasibility of our approach through a proof-of-concept demonstration on real PQC hardware.
Read the full abstract ▾
All authors Xiangyu Ren, Yuexun Huang, Zhemin Zhang, Yuchen Zhu, Tsung-Yi Ho, Antonio Barbalace, Zhiding Liang
Computational Physics
A Thin Sheet Volume Integral Equation Solver for Simulation of Bianisotropic Metasurfaces
Sebastian Celis Sierra, Meruyert Khamitova, Ran Zhao et al. (+2 more)
A thin-sheet (TS) volume integral equation (VIE) formulation incorporating generalized sheet transition conditions (GSTCs) is presented for the simulation of three-dimensional (3D) bianisotropic metasurfaces. The metasurface is represented as an equivalent thin sheet, with its constitutive tensors derived from the GSTC susceptibility tensors. Invoking the thin-sheet approximation, the governing VIEs are reduced to surface integral equations (SIEs), in which tangential and normal flux density components are treated as distinct sets of unknowns and discretized using Rao-Wilton-Glisson and pulse basis functions, respectively. In contrast to conventional GSTC approaches based on conventional SIEs, which represent only tangential fields, the proposed framework rigorously enforces the bianisotropic GSTCs, including normal field interactions, while retaining the flux-based VIE character of the formulation. Numerical examples, including a comparison with an SIE-GSTC solver that neglects the normal susceptibility components, demonstrate the accuracy and robustness of the proposed TS-VIE-GSTC solver for polarization rotation on planar and curved sheets, perfect reflection, beam steering with spatially varying susceptibilities, multi-directional attenuation, and oblique phase-shift transformation.
Read the full abstract ▾
All authors Sebastian Celis Sierra, Meruyert Khamitova, Ran Zhao, Sadeed Bin Sayed, Hakan Bagci
Quantum Physics
LightStim: A Framework for QEC Protocol Evaluation and Prototyping with Automated DEM Construction
Xiang Fang, Ming Wang, Yue Wu et al. (+6 more)
Fault-tolerant
quantum computing increasingly demands rigorous,
circuit-level evaluation of diverse
quantum error correction (QEC) protocols and efficient prototyping of new ones. Such evaluation requires both the physical
circuit and its Detector Error Model (DEM) to estimate end-to-end logical error rates. However, DEM construction today is performed by manual annotation, a tedious and error-prone process that effectively limits evaluation to simple
memory experiments. We present LightStim, a framework that automates DEM construction concurrently with
circuit compilation by maintaining a Pauli tableau augmented with measurement records, with no protocol-specific input required. We
benchmark LightStim across protocols from
memory experiments to end-to-end
distillation circuits; cross-validation against public implementations confirms exact detector and observable counts and consistent logical error rates. Additionally, we demonstrate a novel heterogeneous cross-code
lattice surgery design between surface and punctured
quantum Reed-Muller codes. These capabilities together make LightStim a unified infrastructure for systematic QEC protocol evaluation and exploration. LightStim is open-sourced at https://github.com/QuTone/LightStim.
Read the full abstract ▾
All authors Xiang Fang, Ming Wang, Yue Wu, Sharanya Prabhu, Dean Tullsen, Narasinga Rao Miniskar, Frank Mueller, Travis Humble, Yufei Ding
Optics
Gaussian pulse scattering by a chiral spherical shell
Hector M. Iga-Buitron, Tom G. Mackay and Akhlesh Lakhtakia
Theory was formulated for scattering by a coated
chiral sphere of a plane wave of arbitrary polarization state with amplitude modulated by a Gaussian pulse. The spherical core and the concentric shell of the sphere were composed of two different homogeneous materials, both isotropic
chiral. Calculations of energy efficiencies for extinction, total scattering, and absorption were carried out for the shell material with experimentally determined constitutive parameters, the core being vacuous. All three energy efficiencies depend on the relative thickness of the shell and the circular polarization state of the carrier plane wave.
Read the full abstract ▾
Quantum Physics
Dynamical Regimes of Finite-Length Transmission Lines in Circuit Quantum Electrodynamics
Fabio Borrelli, Giovanni Miano, Adrian Parra-Rodriguez et al. (+1 more)
We study the emergence of continuum, discrete-multimode, and single-mode regimes in finite-length transmission lines capacitively coupled to transmon
qubits. We show that the appropriate description is selected by the hierarchy among the
qubit frequency $\omega_q$, the characteristic transmission line frequency $\omega_{\mathrm{TL}}$, and the characteristic coupling frequency $\omega_g$. In the long-line continuum limit, the transmission line acts as a structured reservoir described by a Drude–Lorentz spectral density; in the short-line limit, it reduces to an effective single-mode resonator; and, between these limits, it behaves as a discrete multimode coupler. This provides a unified cQED picture of the dynamical regimes of finite-length transmission lines in superconducting-
circuit architectures.
Read the full abstract ▾
All authors Fabio Borrelli, Giovanni Miano, Adrian Parra-Rodriguez, Carlo Forestiere
Materials Science
Single-crystal growth and magnetic, magnetoelectric, and optical properties of ferroaxial-type SrMn$_2$Ni$_6$Te$_3$O$_{18}$
Ryoya Nakamura, Shinichiro Asai, Yusuke Nambu et al. (+2 more)
Single
crystals of SrMn$_2$Ni$_6$Te$_3$O$_{18}$, a member of the ferroaxial-type
magnetic oxide family $AB_{2}C_{6}$Te$_3$O$_{18}$ ($A$ = Pb, Sr; $B$ = Mn, Cd; $C$ = Ni, Co), have been successfully grown, and their structural,
magnetic, magnetoelectric, and optical properties have been systematically studied. Imaging of the spatial distribution of electric-field-induced optical rotation reveals that the single
crystals preferentially form single ferroaxial (FA) domains. Magnetization and
neutron diffraction measurements show that Mn$^{2+}$ and Ni$^{2+}$
magnetic moments order antiferromagnetically at $T_{\rm N}$ = 83 K, forming a $c$-axis collinear bidirector-type
antiferromagnetic structure. All independent magnetoelectric tensor components allowed by the
magnetic point group 6/$m^{\prime}$ have been detected, and the $\chi_{33}$ component exhibits a pronounced temperature-dependent anomaly, including a peak and a sign reversal. Preferential formation of single FA domains and a similar $\chi_{33}$ anomaly are also observed in the isostructural compound PbMn$_2$Ni$_6$Te$_3$O$_{18}$. These findings suggest that the ferroaxial and
magnetic characteristics within this structural framework are robust against Sr-Pb replacement.
Read the full abstract ▾
All authors Ryoya Nakamura, Shinichiro Asai, Yusuke Nambu, Takatsugu Masuda, Kenta Kimura
Solar and Stellar Astrophysics
One's loss is (not) another's gain: Isotropic re-emission destabilizes mass transfer from radiative donor stars
K. D. Temmink, S. Justham and O. R. Pols
Non-conservative mass transfer plays a central role in close-binary
evolution, yet its effects on mass-transfer stability are uncertain. One widely adopted prescription, isotropic re-emission, is often assumed to promote stability compared to conservative mass transfer. We investigate the impact of isotropic re-emission on the stability of mass transfer in binaries with radiative envelopes that undergo delayed dynamical instability (DDI). We assess whether simplified criteria used in binary population synthesis codes accurately capture stability boundaries under varying mass-transfer efficiencies. We perform detailed
stellar evolution calculations for a set of representative binaries undergoing DDI. Varying the mass-transfer efficiency beta, we track the onset of instability and quantify the corresponding critical mass ratio. We compare our results with predictions from the commonly used
zeta-method, which is based on mass-radius exponents. We find that a lower mass-transfer efficiency destabilizes mass transfer in DDI systems, whereas the
zeta-method predicts that isotropic re-emission should stabilize it. The discrepancy arises because the
zeta-method fails to capture the full
evolution of the orbit and mass ratio during pre-instability mass transfer. In some cases, the critical mass ratio is underestimated by nearly a factor of two. Our findings show that isotropic re-emission can reduce, rather than enhance, DDI stability, underscoring the limitations of using fixed critical mass ratios and
zeta-based criteria. This highlights the need for calibrated prescriptions that capture the time-dependent
evolution of mass ratio and orbital separation, with direct implications for modelling X-ray binaries, symbiotic
stars, and double white
dwarfs, including their transient rates and delay-time distributions.
Read the full abstract ▾
Quantum Physics
HEOM-in-Calibration-Loop: Exposing Non-Markovian Bath Signatures That Markovian Calibration Elides in Superconducting-Qubit Tune-Up
Jun Ye
Closed-loop superconducting-
qubit calibration has matured into DAG-orchestrated protocol chains, yet published frameworks treat the bath via a Markovian master equation or a phenomenological likelihood, absorbing bath structure into fit residuals instead of reporting it as a diagnostic. We integrate a QuTiP 5.x hierarchical-equations-of-motion (HEOM) solver driven by a Tier-1 1/f Burkard bath into a multi-protocol calibration DAG (Rabi -> {Ramsey || T1}) and
benchmark it against sesolve and mesolve on a frozen platform in a pulse-level simulator (no hardware validation). The Ramsey channel carries the headline: the Markovian fit is censored by its exponential-family numerical ceiling, while HEOM recovers a physical revival envelope whose primary T2* separates from the Markovian reference by at least 13x at 95% independent-bootstrap confidence within the HEOM-feasible budget; the point-estimate ratio reaches >=28x on the 50-point primary-t1 grid and ~72x on the 30-point biexp-family tau_aw pivot at L=5. Rabi contrast falls 2.17% below mesolve on a noise-limited 30-point grid; the paired-bootstrap CI crosses zero, so this channel corroborates rather than independently establishes the non-Markovian signature. T1 decay shape matches across backends (beta=1.000), yet HEOM's initial occupation drops from 1.000 to 0.879 – a bath-dressed contamination stable under a 16-point densification. The DAG adds 9.62 us average per-protocol scheduling overhead, no meaningful latency penalty at protocol granularity. HEOM-in-loop thereby changes what calibration reports: bath structure appears as a quantifiable residual rather than a hidden confound.
Read the full abstract ▾
Solar and Stellar Astrophysics
X-Shooting ULLYSES: Massive stars at low metallicity XV. On the metallicity dependence of B-supergiant mass-loss rates
O. Verhamme, J.O. Sundqvist, A. de Koter et al. (+21 more)
Context. For
stellar evolution models we rely on mass-loss rate prescriptions that show features that lack empirical confirmation, such as the bi-stability jump. This jump is an increase in mass loss in the decreasing temperature regime Teff 28-21 kK. Although papers compared empirical results to prescriptions,a large observational sample of B
stars for which the wind has been scrutinised over different
metallicities is still lacking. Aims. By modelling of both ultraviolet (ULLYSES) and optical (XShootU) spectra, we determined the
stellar and wind parameters, of 24 SMC B
stars ranging in Teff from 13 to 29 kK. By combining this sample with LMC studies, we compared the wind behaviour of B
stars in two different
metallicity regimes. We compared our results to common mass-loss rate prescriptions to test features present in these models and their
metallicity dependence. Methods. We have used the model atmosphere code fastwind and the genetic
algorithm code Kiwi-GA to fit the UV and optical spectra simultaneously. This allows us to determine wind properties including clumping behaviour. Results. The
metallicity trends present in the mass-loss prescriptions (Z^(0.41-1.4)) explored here overestimate the empirical
metallicity dependence in the B-
star regime, which appears very weak. We do not find an increase in mass-loss rate at approximately spectral type B1. We show that on average 40% of the wind mass is located in the wind medium between the clumps. We compiled a sample of 80+ O and B
stars in the SMC and LMC. From a comparison we find a clear difference in O- and B-type
metallicity dependence. Conclusions. The lack of a bi-stability jump in the B-
star regime and a weak
metallicity dependence for the same
stars offers new empirical constraints to models of line-driven winds. As differences between these models are large (reaching orders of magnitude) such constraints are much needed.
Read the full abstract ▾
All authors O. Verhamme, J.O. Sundqvist, A. de Koter, H. Sana, F. Backs, S. A. Brands, D. Debnath, N. Moens, P.Schillemans, C. Van der Sijpt, S. R. Berlanas, M. Bernini-Peron, P.A. Crowther, A. C. Gormaz-Matamala, R.Kuiper, C. Hawcroft, F. Najarro, D. Pauli, A.A.C. Sander, J.Th. van Loon, J.S. Vink, H. Todt, F. Tramper, Xshootu collaboration
Soft Condensed Matter
Continuum granular flow model with restitution-derived viscoelastic damping
Bodhinanda Chandra, Sachith Dunatunga and Ken Kamrin
This work presents a unified viscoelastic-viscoplastic continuum framework for modeling rate-dependent granular flows across regimes. The formulation incorporates two distinct rate-dependent mechanisms, namely micro-inertia and viscoelastic dissipation, within a single continuum description. A central contribution is an explicit link between the coefficient of restitution and a continuum viscosity, derived from an analysis of wave attenuation in granular assemblies, thereby establishing a direct connection between particle-scale collision physics and macroscopic damping. This relation is introduced while retaining inertia-dependent plastic flow governed by the classical $\mu(I)$ rheology. The constitutive model is constructed by meticulously partitioning elastic and plastic responses within the model and corresponding stress-update routine, such that viscous dissipation governs wave propagation and collisional processes without altering the plastic flow rule. The framework is implemented within the material point method to simulate transient processes involving large deformations, material separation, and subsequent reconsolidation. A range of numerical examples, including steady, transient, vibrational, and impact-driven flows, demonstrates that the model captures wave propagation,
diffusion, and rate-dependent granular behavior within a unified continuum setting.
Read the full abstract ▾
High Energy Physics (Theory)
$O(d,d)$ symmetric gravity and finite coupling holography
Umut Gürsoy, Pedro Vicente Marto and Edwan Préau
We construct asymptotically AdS$_5$ black brane solutions in a theory of
gravity with an infinite series of
curvature corrections. The action is based on an $O(d,d)$ symmetric ansatz which has been argued to describe the classical NSNS sector of string theories. We find that, for this general class of theories, the singularity behind the horizon is not resolved by the
curvature corrections. The approach to the singularity is however generically modified, being characterized by different Kasner exponents. We also show that, in the presence of a non-trivial dilaton, a slight generalization of these types of
curvature corrections can generate dynamically a negative cosmological constant in the region of small coupling. This provides a mechanism through which asymptotic freedom could emerge in the hypothetical string dual of QCD.
Read the full abstract ▾
Optics
Reconfigurable ultrafast perovskite polariton logic gates via nonlinear dynamics
Yuyang Zhang, Zhuoya Zhu, Xin Zeng et al. (+14 more)
Exciton-polaritons provide a great platform for developing ultrafast all-optical logic gates for
quantum and optical chips. However, progress toward practical polariton logic remains limited due to incomplete logical functionality on a single device. Herein, we present a single-device perovskite polariton platform enabling reconfigurable, ultrafast logic gates with functional completeness. The device consists of an optically trapped perovskite microwire, generating well-controlled non-
equilibrium polariton condensation states for multiple logic operation channels. By tailoring the power of signal and gate beams, the same device is programmed to execute three basic Boolean functions (AND,OR,and NOT) and a high-order XOR function with a high on/off ratio of 21 dB, and a fast response time 6.7 ps. The reconfigurability arises from the selective activation of different nonlinear responses of polariton condensates, including amplification, seeding state transitions, and nonlinear interaction. These results provide valuable insights for advancing
exciton-polariton logic gates.
Read the full abstract ▾
All authors Yuyang Zhang, Zhuoya Zhu, Xin Zeng, Shuai Zhang, Xinyi Deng, Tian Lan, Changhai Zhu, Kwok Kwan Tang, Qinglin Jia, Yuexing Xia, Yiyang Gong, Wenna Du, Feng Li, Rui Su, Xuekai Ma, Xinfeng Liu, Qing Zhang
Computational Physics
Enabling Biomolecular Simulations with Neural Network Potentials in GROMACS
Lukas Müllender, Berk Hess and Erik Lindahl
Neural network potentials (NNPs) are rapidly changing the landscape of state-of-the-art molecular dynamics (MD) simulations. To make full use of this development, the community needs flexible, easy-to-use interfaces firmly integrated with existing methodologies. To address this, we here present an interface for hybrid machine learning/molecular mechanics (ML/MM) simulations implemented in the widely used MD code GROMACS. The interface enables NNPs trained in the PyTorch framework to contribute energies and forces during MD simulations, either for selected subsets or entire molecular systems. By defining a flexible set of model inputs and outputs, the interface is agnostic to specific NNP architectures and can accommodate a wide range of descriptor-based and message-passing models. In particular, the design integrates NNP inference seamlessly into the extensive GROMACS molecular simulation ecosystem, providing users with the capability to straightforwardly combine NNPs with existing advanced sampling and free energy workflows. We demonstrate the capabilities of the interface using several representative applications, including enhanced sampling of peptide torsional free energy landscapes, absolute solvation free energy calculations, and
protein–ligand simulations. We also run performance
benchmarks on water boxes for several different NNP architectures. Our interface is available in recent GROMACS releases, and we believe it will provide a practical foundation for incorporating machine learning potentials into production MD simulations of biomolecular systems.
Read the full abstract ▾
Solar and Stellar Astrophysics
BV photometry of the ultracompact binary star GP Com
R. Zamanov, L. Dankova, M. Minev et al. (+2 more)
We present optical B and V band photometry of GP Com - an ultracompact binary consisting of an accreting white
dwarf and helium secondary component. Our data set contains 7.7 hours observations in V band with the 2.0m
telescope and 2.9 hours simultaneous observations in B and V bands with the 1.5m
telescope of the Rozhen National Astronomical Obsevatory, Bulgaria. The observations cover of about 13 orbital periods. We find an orbital modulation with amplitude 0.04-0.05 mag in B and V bands. Adopting that it is due to a bright spot, we estimate its temperature 19700 \pm 3000 K. We estimate mass
accretion rate onto the white
dwarf of about 2.10^{-12} M_sun/yr, consistent with the predicted rate for a cool donor. The data are available on Zenodo: zenodo.org/records/18768211.
Read the full abstract ▾
All authors R. Zamanov, L. Dankova, M. Minev, D. Boneva, K. Yankova
Solar and Stellar Astrophysics
Investigation of White-light Emission in Compact Flares
Yongliang Song
White-light
flares (WLFs) are usually tend to be those very large
flares. Nevertheless, several small and compact WLFs have been reported and thought to be produced by low-height
magnetic reconnection. However, whether low-height
magnetic reconnection can efficiently produce WLFs remains unclear. For the first time, we conduct a statistical study of the WL emission in compact
flares to address this question. Using over a decade observations from the
Solar Dynamics Observatory (SDO), we identify 28 compact
flares, including 19 C-class and 9 B-class
flares. We find these compact
flares can be classified into three types based on the
magnetic configuration of the
flare, corresponding to the U-shape loop (type I), the flux emergence near sunspot (type II), and the fan-spine like structure (type III). For each type, the
flares numbers are 9 (7 C-calss and 2 B-class), 9 (3 C-calss and 6 B-calss) and 10 (9 C-calss and 1 B-calss), respectively. We find the occurrence rate of WLFs in compact
flares is $\sim60.7\%$ (17/28), and for the C-class the rate can be up to $\sim89.5\%$ (17/19). No WLF was found in B-class compact
flares. The occurrence rates for three types are $\sim77.8\%$ (7/9), $\sim11.1\%$ (1/9) and 90% (9/10), respectively. And for the C-class
flares, the occurrence rates for three types are 100% (7/7), $\sim33.3\%$ (1/3) and 100% (9/9), respectively. Our results suggest type-I and type-III compact
flares are more likely to produce WL emissions.
Read the full abstract ▾
Astrophysics of Galaxies
SFUMATO#: A GPU-accelerated code for self-gravitational radiation hydrodynamics simulation with adaptive mesh refinement
Hajime Fukushima and Tomoaki Matsumoto
We present a new implementation of the SFUMATO code, called SFUMATO#, for solving self-gravitational radiation hydrodynamics problems using adaptive mesh refinement (AMR) with the CUDA/HIP programming frameworks. The code incorporates a multigrid solver for self-
gravity, radiation transfer with M1 closure and reduced speed of light approximation, non-
equilibrium chemistry, thermal
evolution, and sink particle schemes. We develop new non-
equilibrium chemistry and thermal solvers based on a linearized implicit method, whose accuracy is validated through a series of test problems by comparison with solutions obtained using the Newton-Raphson method. By incorporating the heat capacity of
dust grains, the
dust temperature can be evolved without iterative energy-balance calculations. From the perspective of computational cost, we demonstrate that adopting an increased pseudo
dust heat capacity accelerates the chemistry solver while preserving accuracy, even when the value is increased by up to three orders of magnitude relative to the realistic value. In addition, we perform a suite of test problems to confirm the validity of the other components of our implementation. The code supports multi-GPU execution via MPI-based parallelization. We measure the strong-scaling performance of the hydrodynamics and self-
gravity solvers on both uniform and AMR grids, as well as the overall code performance using a
giant molecular cloud simulation. We find that the computational cost of the self-
gravity solver increases with the number of MPI processes, indicating that efficient parallel performance is achieved only when the number of devices is chosen such that the cost of the self-
gravity solver remains comparable to that of the other components.
Read the full abstract ▾
Physics and Society
Disorder Crossover in Urban-Front Growth
Martin Hendrick, Maximilian Trique and Gabriele Manoli
Urban expansion fronts display a robust local roughness exponent together with strongly dispersed growth and nonuniversal dynamic exponents. We show that this coexistence can arise from a disorder-controlled crossover in projected-front growth. Introducing a minimal Eden model, in which geographic constraints act as quenched dilution and coalescence as quenched local acceleration, we demonstrate that the resulting front enters a long disorder-dominated preasymptotic regime, whose scaling near threshold is set by ordinary two-dimensional percolation. In this regime, the local roughness remains close to $1/2$, while the large-scale exponents vary broadly with disorder and acceleration. These results provide a minimal explanation of urban-front roughening and suggest a more general mechanism for
stochastic growth in heterogeneous media.
Read the full abstract ▾
Strongly Correlated Electrons
Decomposing Fractional Quantum Hall Wave Functions via Operator Contraction Multiplication
Dong-Hao Guan, Licheng Wang, Yuan Zhou et al. (+2 more)
We develop a general algebraic scheme to decompose fractional
quantum Hall (FQH) wave functions based on the operator contraction multiplication. By introducing fermionic and bosonic operators and establishing three fundamental contraction rules, we achieve an exact decomposition of Laughlin states. This approach naturally extends to multi-component systems by factorizing coupled Jastrow factors via resultants and elementary symmetric
polynomials, enabling the first complete decomposition of Halperin states. For Halperin ($2,2,1$) state, we explicitly derive its basic expansion, identify root configurations, and reveal intra- and inter-color squeezing operators, thereby uncovering the underlying generalized Pauli principle. Using this method, we compute orbital
entanglement spectra for up to $16$ particles with decomposition dimensions exceeding $10^{11}$, obtaining edge excitation sequences that precisely match
chiral Luttinger
liquid theory. Our framework breaks through the longstanding limitations of Jack
polynomials, provides a unified decomposition for both single- and multi-component FQH states, and opens a new avenue for exploring wave functions for more complex FQH states.
Read the full abstract ▾
All authors Dong-Hao Guan, Licheng Wang, Yuan Zhou, Ai-Lei He, Yi-Fei Wang
Computational Physics · Cross-listed from cs.CE
JAX-BEM: Gradient-Based Acoustic Shape Optimisation via a Differentiable Boundary Element Method
James Hipperson, Jonathan Hargreaves and Trevor Cox
Engineering structures are increasingly designed using numerical optimisation. However, traditional optimisation methods can be challenging with multiple objectives and many parameters. In machine learning, stable training of artificial neural networks with millions or billions of parameters is achieved using automatic differentiation frameworks such as JAX and Pytorch. Because these frameworks provide accelerated numerical linear
algebra with automatic gradient tracking, they also enable differentiable implementations of numerical methods to be built. This facilitates faster gradient-based optimisation of geometry and materials, as well as solution of inverse problems. We demonstrate JAX-BEM, a differentiable Boundary Element Method (BEM) solver, showing that it matches the error of existing BEM codes for a
benchmark problem and enables gradient-based geometry optimisation. Although the demonstrated examples are for acoustic simulations, the concept could be readily extended to electromagnetic waves.
Read the full abstract ▾
Plasma Physics
Collisionless Phase Mixing Mimics Diffusive Transport in Radiation Belt Observations
Adnane Osmane, Xin An, Anton Artemyev et al. (+3 more)
Since the dawn of the space age, observations of energetic particles in planetary radiation belts have been interpreted within a diffusive transport framework, even though the dominant processes that populate and deplete these belts-such as injections and moon-driven absorption-produce highly structured, spatially localized particle distributions. This exposes a fundamental question: how can coherent phase-space structures evolving under collisionless dynamics give rise to observational signatures consistent with
diffusion-based transport? Here we show that
diffusion-like behaviour inferred from radiation belt observations can arise solely from an observational phase-mixing effect, independent of
stochastic wave-particle transport. As orbiting spacecraft sweep across neighbouring drift shells while trapped particles undergo electromagnetic drifts, measurements inevitably sample regions with slightly different drift frequencies. This converts localized drift-phase structures into rapidly decorrelating temporal signals, making them observationally indistinguishable from those produced by
stochastic wave-particle processes. We derive the associated correlation function analytically and show that the effective lifetime of these structures is only a few drift periods. Consequently, even highly localized injections rapidly lose coherence, preventing spacecraft from resolving fine-scale structure in the distribution function. These results show that collisionless dynamics can produce observational signatures that mimic diffusive transport on timescales shorter than those expected from radial transport, biasing inferred transport rates and long-term flux predictions. This calls for a reassessment of
diffusion-based interpretations from sparse in-situ measurements of radiation belts at Earth, across the
solar system, and in the recently discovered radiation belts of ultra-cool brown
dwarfs.
Read the full abstract ▾
All authors Adnane Osmane, Xin An, Anton Artemyev, Oliver Allanson, Jay Albert, Miroslav Hanzelka
Instrumentation and Methods for Astrophysics
Hill's level surfaces in the circular restricted three-body problem solved
Jean-Marc Huré
We report the closed-form expression for Hill's surfaces in the circular restricted three-body problem. The solution $\phi(r,\theta)$, derived in the primary-centric spherical coordinate system, is deduced from a cubic equation delivering at most two roots on each side of a separatrix. The famous patterns (tadpole, horseshoe and peanut shapes, Roche lobes and Hill's quasi-spheres) are exactly produced.
Read the full abstract ▾