Peer Revenue Publish or profit

Papers

Fresh from arXiv, typeset properly. Highlighted words trade on the market.

Physics

Watch Physics (sign in to use)

Wednesday 22 April

Mathematical Physics

The tentacles landscape: geometric properties of high-dimensional basins of attraction

Basins of attraction in multistable high dimensional dynamical systems are expected to have universal features but very little has been proved rigorously. We consider phase oscillators coupled according to a cycle graph, $\dot\theta_i = f(\theta_{i+1}-\theta_i) + f(\theta_{i-1}-\theta_i)$, with coupling $f$ that is $C^1$, odd, $2\pi$-periodic, and strictly increasing on $(-\pi,\pi)$. We prove the full “octopus” picture of the basins of attraction observed numerically by Zhang and Strogatz [Phys.\ Rev.\ Lett.\ 127 (2021) 194101] and, beyond this model, across a wide family of high-dimensional multistable systems. In our case, we have a family of stable equilibria that can be indexed by their winding number $q \in \mathbb Z\cap(-n/2,n/2)$. Basin volumes obey a Gaussian law $\mu(\mathcal K_q)=\sqrt{6/(\pi n)}\,e^{-6q^2/n}(1+o(1))$ in the winding number. The distance from a uniform sample to its attractor, when divided by $\sqrt n$, concentrates at $\sqrt{\pi^2/3}\approx 1.814$. Along almost every straight line through any twisted state, the ray enters every other basin infinitely many times, with frequencies given by the basin volumes. The inscribed ball at a twisted state has radius $({\pi}/{\sqrt2})(1-{2|q|}/{n})$ for every $n$, while as $n\to\infty$, a typical ray travels distance $(\pi/2)\sqrt{n/\log n}$ before first leaving the basin: the head of the octopus is sharply anisotropic.
Read the full abstract

Materials Science

Bulk and surface electronic structure of MoAlB(010)

The bulk and surface electronic structure of MoAlB(010) is studied by a combination of angle-resolved photoemission spectroscopy and density functional calculations. The observed bulk Fermi-level crossings agree with the previously reported bulk Fermi surface of the material. Additionally, we find several surface states in the wide projected bulk band gaps around the Fermi energy. The surface states differ in their stability under residual-gas exposure in the vacuum system and in the magnitude of their Rashba-type spin-orbit splitting. We explain this in terms of their elemental and orbital character. A surface state arising from Al dangling bonds is sensitive to surface contamination, whereas a mainly Mo-derived surface state exhibits the stronger spin-orbit splitting. The surface states show symmetry-enforced crossings near the $\bar{\mathrm{S}}$ point of the surface Brillouin zone. These are protected by the mirror-symmetry elements of the p2mm wallpaper group.
Read the full abstract

All authors Gianmarco Gatti, Amalie H. Svaneborg, Wu Bing, Gesa-R. Siemann, Anders S. Mortensen, Naina Kushwaha, Jennifer Rigden, Jakob K. Svaneborg, Matthew D. Watson, Timur K. Kim, Charlotte E. Sanders, Kristian S. Thygesen, Zdenek Sofer, Philip Hofmann

Chemical Physics

Different perspectives on the exact factorization for photon-electron-nuclear systems

We employ the exact factorization of a multi-component wavefunction to analyze the dynamics of interacting photons, electrons and nuclei. We consider physical situations emerging in the regime of strong coupling between light excitations and molecular - electronic excitations, giving rise to the so-called molecular polaritons. Nonadiabatic molecular dynamics techniques, routinely used in the field of chemical physics, have been often employed to simulate photophysical and photochemical phenomena in the presence of molecular polaritons. In this work, we analyze the foundations of these techniques in the eye of the exact factorization and we assess their performance on illustrative model studies.
Read the full abstract

All authors Claudia Magi, Peter Schuerger, David Lauvergnat, Federica Agostini

Chaotic Dynamics

Extreme events in MLC circuit

The Murali-Lakshmanan-Chua (MLC) circuit is a well-recognized prominent nonlinear, nonautonomous, and dissipative electronic circuit having a versatile chaotic nature. Unraveling the dynamical synergy responsible for the genesis of extreme events in nonlinear dynamical systems is a prolific and spellbinding research area. The present study unveils the dynamical exposition of emerging extreme events in the MLC circuit concerning two different events being defined in the system. The large expansion of the chaotic attractor following the PM intermittency route plays the crucial role as the precursor behind the emergence of extreme events in the system. Our main finding reveals the prevalence of a force field due to the presence of externally applied periodic force in the system that creates the dynamical synergy that compels the chaotic trajectory traversing in its phase space to be largely deviated from the residing space, and this large deviation shows the signature of extreme events. Apart from the force field explication, we explored another two dynamical aspects that also interpret the mechanism behind the genesis of extreme events as the large deflection of the chaotic trajectory in the system: the decomposition of the phase space in stable and unstable manifolds concerning slow-fast dynamics and using Floquet multipliers. These two different aspects of calculations of the stable and unstable manifolds explicate the large excursion of the chaotic trajectory as extreme events from two different perspectives. We also analyzed the rare occurrences of the extreme events statistically using extreme value theory: the threshold excess values follow the generalized Pareto distribution, and the inter-extreme-spike-intervals follow the generalized extreme value distribution.
Read the full abstract

General Relativity and Quantum Cosmology

Astrophysically Realistic Secondary Spins Trigger Chaos in Schwarzschild Spacetime and Discernible Gravitational Wave Signatures

Chaos in extreme-mass-ratio inspirals is often thought to require unrealistically large secondary spins, making its astrophysical relevance uncertain. However, we find that chaos persists across the astrophysically realistic spin range for a spinning secondary orbiting a Schwarzschild black hole. This nonintegrable dynamics leaves clear signatures in the emitted gravitational waves. Nearby regular and chaotic trajectories can remain similar in the time domain and retain broadly aligned dominant spectral peaks, yet chaotic signals develop a much less discrete frequency-domain structure with dense inter-peak power. Furthermore, we introduce a local spectral-flatness measure and find it to be several hundred times larger for the chaotic signal than for the neighboring regular signals. Finally, a change in the secondary spin by as little as \(1\%\) of its maximal physically allowed value can drive the system from regular to chaotic motion and produce distinctive detector-level waveforms.
Read the full abstract

All authors Dan-Dan Yuan, Jia-Geng Jiao, Yu-Qi Lei, Jun-Xi Shi, Jing-Qi Lai, Caiying Shao, Yu Tian

Fluid Dynamics

Subharmonic instability of large-scale wavy structures in two-dimensional channels

A particular interest on two-dimensional turbulence is the inverse energy cascade from small to large sales, which leads to an energy condensation accompanied by the formation of large-scale vortical structures. Indeed, such a phenomenon is observed in the two-dimensional channel (2DCH) with large Reynolds numbers, where prominent large-scale wavy structures play a central role in the momentum and energy transfer across the inhomogeneous wall-normal direction \citep{Falkovich2018}. Yet, the instability of these wavy structures remains poorly understood, and it is unknown whether they have the capacity to generate turbulence. To address this, we first conduct the direct numerical simulation (DNS) of Navier-Stokes equations for 2DCH, then extract the large-scale wavy structures through the singular value decomposition, and finally perform a Floquet-based secondary instability analysis. Two bulk Reynolds numbers are examined in particular, i.e. $Re = 3000$ and $Re = 200000$, which lie on opposite sides of the transitional regime near $Re \approx 10000$ and cover the previously reported simulation domain. At $Re = 3000$, the large-scale wavy structure is found to be linearly stable, consistent with the laminar-like DNS flow field. However, at $Re = 200000$, a subharmonic torsional mode is identified, which leads to a definite growth rate ($\lambda_r = 0.18$) for the wavy structures with a half wave-length shift. Temporal reconstruction shows that this unstable mode deforms and splits into multiple wave trains and evolves in the opposite phase. Compared to the TS (Tollmien-Schlichting) wave of laminar flow, the subharmonic mode found here offers a novel understanding for the generation of turbulence in larger Reynolds number two-dimensional channels.
Read the full abstract

All authors An-Xiao Han, Peng-Yu Duan, Ming-Ze Ma, Xi Chen

Mathematical Physics

A semiclassical approach to spectral estimates for random Landau Schrodinger operators

We prove spectral properties for random Landau Schrödinger operators on $L^2(\mathbb{R}^2)$ with bounded, random potentials supported in a square $\Lambda_L \subset \mathbb{R}^2$ of side length $L>0$, using semiclassical pseudodifferential calculus. The semiclassical parameter $h$ is the inverse of the magnetic field strength $B > 0$. By means of the Grushin method, we are led to the analysis of an effective Hamiltonian on $L^2 (\mathbb{R})$, the principal term of which is a sum of certain compact, self-adjoint pseudodifferential operators. By analyzing these operators, we prove semiclassical Wegner and Minami estimates for the random Landau Schrodinger operator in energy intervals in the spectral bands around each Landau level.
Read the full abstract

Disordered Systems and Neural Networks · Cross-listed from q-bio.NC

Response time of lateral predictive coding and benefits of modular structures

Lateral predictive coding (LPC) is a simple theoretical framework to appreciate feature detection in biological neural circuits. Recent theoretical work [Huang et al., Phys.Rev.E 112, 034304 (2025)] has successfully constructed optimal LPC networks capable of extracting non-Gaussian hidden input features by imposing the tradeoff between energetic cost and information robustness, but the resulting dynamical systems of recurrent interactions can be very slow in responding to external inputs. We investigate response-time reduction in the present paper. We find that the characteristic response time of the LPC system can be minimized to closely approaching the lower-bound value without compromising the mean predictive error (energetic cost) and the information robustness of signal transmission. We further demonstrate that optimal LPC networks taking a modular structural organization with extensively reduced number of lateral interactions are equally excellent as all-to-all completely connected networks, in terms of feature detection performance, response time, energetic cost and information robustness.
Read the full abstract

All authors Guanghui Cai, Zhen-Ye Huang, Weikang Wang, Hai-Jun Zhou

Optics

Node-reduction through Joint Optimization of Input and Readout Layers in Photonic Reservoir Equalization

Photonic reservoir computing is a machine learning paradigm in which a recurrent neural network remains fixed while only the output weights are trained. This makes it a well-suited approach for high-speed signal equalisation in optical communication systems, offering a trainable, low-power, and low-complexity solution. However, achieving strong performance typically requires relatively large network sizes, as learning is confined to the output layer. To address this, we investigate the role of trainable input mappings alongside conventional output weight optimisation. Across a range of short- and mid-reach IM/DD transmission scenarios, reaching up to 200 km for a 28 GBd NRZ signal, improvements of over two orders of magnitude in BER are achieved. This enables halving the network size while maintaining comparable performance. Furthermore, we show that this approach effectively extends the memory of the reservoir, resulting in over three orders of magnitude improvement in memory-intensive tasks. These results also show that starting at 16 nodes a performance of at least one to two magnitudes better than both a complexity matched FFE and a Volterra filter of second order are reached.
Read the full abstract

High Energy Physics (Experiment)

Using Graph Neural Networks for hadronic clustering and to reduce beam background in the Belle~II electromagnetic calorimeter

The Belle~II electromagnetic calorimeter consists of 8376 CsI(Tl) scintillation crystals and is not only used for measuring electromagnetic particles but also for identifying and determining the position of hadrons, particularly neutral hadrons. Recent data-taking periods have presented challenges for the current clustering method: Firstly, the record-breaking luminosities achieved by the SuperKEKB accelerator have increased background rates, leading to a higher number of crystals with energy depositions, and an overall increase in the total energy measured in the calorimeter. This resulted in poorer photon energy resolution and the reconstruction of more fake photon clusters. Secondly, challenges arise from the nature of hadronic interactions. In contrast to $\gamma$ and $e^{\pm}$, hadrons interacting in the calorimeter result in irregular, sometimes even disconnected energy depositions. These clusters can be misinterpreted as photon clusters, thereby reducing the position resolution of neutral hadrons or causing a complete misidentification of the hadron. Graph neural networks offer a promising solution to both challenges. By representing only crystals with an energy measurement as nodes, graphs capture the sparsity of the input. Using message-passing layers that learn the graph edges also helps to address the asymmetric sensor layout of Belle~II's ECL. In these proceedings, we will present a novel approach to identify the challenges in the detector simulation. Using this information, we train a Graph Neural Network to identify and remove unwanted depositions abefore clustering.
Read the full abstract

Materials Science

Accurate and Efficient Interatomic Potentials for Dislocations in InP

We present Atomic Cluster Expansion (ACE) and MACE models trained on a new dataset of Density Functional Theory (DFT) calculations, constructed for the task of studying the mobility of dislocations in Indium Phosphide (InP). The models are validated in a suite of tests against RSCAN DFT, and compared with previously published potentials from literature. Our new models act as much better surrogates for DFT than the literature models: errors on partial dislocation formation energies are at most 4% for both ACE and MACE, compared with 18% for the MACE-MPA foundation model and 42-50% for earlier bespoke potentials. The bespoke MACE model achieves this accuracy while being around five times faster to evaluate than the MP0 and MPA foundation models.
Read the full abstract

All authors Thomas Rocke, Thomas Hudson, Richard Beanland, James Kermode

Mathematical Physics · Cross-listed from math.PR

Macroscopic loops in the random loop model on sparse random graphs

We study the random loop model with crosses and bars on sparse random graphs. Our main objective is to prove the existence of macroscopic loops, in the sense that a loop visits a positive proportion of the vertices. We develop a deterministic drift method on arbitrary finite graphs based on three ingredients: a local split–merge–rewire analysis for the loop number, an exact differential identity for the partition function, and a slice estimate reducing the relevant same-loop insertion volume to induced edge counts of small vertex sets. This yields a general criterion in terms of a small-set sparsity condition on the underlying graph. We then verify this condition for random regular graphs, sparse Erdős–Rényi graphs, and simple bounded-degree configuration models, obtaining averaged lower bounds on the probability of a macroscopic loop whenever the edge density exceeds an explicit threshold depending on the loop weight \(\theta\) and the cross parameter \(u\). For integer values of \(\theta\), a trace representation of the partition function implies log-convexity, which upgrades the averaged bounds to pointwise-in-time results away from the threshold time.
Read the full abstract

Quantum Physics · Cross-listed from math.NA

Constrained Optimal Polynomials for Quantum Linear System Solvers

Quantum linear system solvers typically realize the inverse map as a polynomial transformation of the spectrum, so their practical cost hinges on implementing this transformation at a low polynomial degree. We introduce constrained optimal polynomials as a framework for this task, drawing on classical Krylov subspace theory. Within this framework, we develop two classes of solvers. Constrained Uniform Polynomial (CUP) solvers optimize the tradeoff between approximation accuracy and block encoding normalization under a uniform spectral model consistent with the available bounds. Constrained Adaptive Polynomial (CAP) solvers retain this structure but replace the uniform model with a probability measure reconstructed from spectral moments via a maximum entropy ansatz, where the moments are extracted from QSVT measurements. Numerical experiments under hardware and stochastic noise show that these methods achieve lower error than standard QSVT-based and Chebyshev-iteration-type solvers, particularly in noise-limited regimes. CUP offers robust performance under generic spectra, while CAP provides further improvement when the spectral structure can be exploited.
Read the full abstract

Fluid Dynamics

Nonisothermal global-pressure exactness in fractured multiphase flow with aperture feedback

Global-pressure formulations recast multiphase Darcy flow in terms of a single pressure driving the total flux. Their exact equivalence to phase-pressure formulations holds only when the constitutive data satisfy the compatibility conditions required for a total-differential structure and its generalized nonisothermal extension. Here, we derive the exactness criterion for temperature-dependent mobilities and capillary pressures. We show that equivalence depends on whether the mobility-weighted capillary contribution is path independent in the saturation–temperature domain, so that it can be absorbed into a scalar global pressure. This yields the classical compatibility conditions within the saturation sector and a distinct mixed saturation–temperature condition that arises only in nonisothermal settings. We then incorporate this structure into a reduced matrix–fracture model with heat transport, matrix–fracture thermal exchange, and evolving aperture. Numerical benchmarks recover the three regimes predicted by the theory: globally exact, exact on each fixed-temperature slice but not on the full saturation–temperature domain, and fully nonexact. In fractured systems, thermal forcing alone can drive transitions between these regimes, while aperture evolution changes the path through state space. When saturation-sector exactness is lost, a least-squares projection on fixed-temperature slices extracts the nearest gradient component of the mobility-weighted capillary field. This yields a conservative slice-wise scalar-pressure surrogate and a quantitative projection residual. The residual separates saturation-sector nonintegrability from the mixed saturation–temperature incompatibility that controls genuinely nonisothermal loss of exactness. The framework links nonisothermal exactness theory, fractured-flow dynamics, and conservative reduced closure in a global-pressure formulation.
Read the full abstract

Mesoscale and Nanoscale Physics

Modeling of flopping-mode spin qubits: beyond the two-site model

We present a flexible modeling framework for flopping-mode spin qubits that captures the spatial structure of the double-well confinement and magnetic-field-gradient profile going beyond conventional low-energy descriptions. By using this approach, we simulate electric dipole spin resonance-based single-qubit control and evaluate the frequency and spectral purity of the Rabi oscillations across different parameter regimes. Our analysis reveals a fundamental tradeoff between fast electrical driving and clean single-mode Rabi oscillations, and demonstrates that the standard two-site low-energy approximation can overestimate the Rabi frequency by up to $\sim$ 20% in certain parameter regimes. We also investigate two-qubit control by considering two capacitively coupled flopping-mode qubits and derive the corresponding exchange interaction with an appropriately restricted configuration interaction treatment. Our approach reveals the interplay between the spatial profile of the double-well confinement, magnetic field gradient, and Coulomb interaction, which together govern the effective exchange coupling strength. Our spatially resolved modelling framework enables efficient exploration of double-well confinement parameters and magnetic field gradient profiles, enabling a transparent mapping from spatial device properties to flopping-mode qubit parameters and quality metrics.
Read the full abstract

All authors Ashutosh Kinikar, Vukan Levajac, Kristof Moors, George Simion, Monica Benito, Bart Soree

Nuclear Theory

Charged-Current Neutrino-Induced Single-Pion Production in the Superscaling Approach and Relativistic Distorted-Wave Impulse Approximation

In this work, we present a detailed comparison of the SuSAv2 (SuperScaling Approach version 2) and RDWIA (Relativistic Distorted-Wave Impulse Approximation) models with measurements of charged-current neutrino-induced single-pion production from different experiments (T2K, MINERvA and MiniBooNE), studying the differences between the two theoretical descriptions. The neutrino energy range in these experiments spans from hundreds of MeV to roughly 20 GeV, and the nuclear targets are mainly composed of $^{12}$C. The SuSAv2 model uses the single-nucleon inelastic structure functions from the ANL-Osaka DCC model, which allows for a separation of pion production channels, distinguishing between the $\pi^+$, $\pi^-$ and $\pi^0$ final states. In the RDWIA approach, the Hybrid model developed by the Ghent group is used for the description of the boson-pion-nucleon vertex.
Read the full abstract

All authors Jesus Gonzalez-Rosa, Alexis Nikolakopoulos, Maria B. Barbaro, Juan A. Caballero, Raúl González-Jiménez, Guillermo D. Megias

Optics

Baudrate- and Reach-Flexible All-Optical Equalization with a Co-Packaged Photonic Reservoir and Receiver

Intensity-modulation direct-detection links must support increasing baudrates and transmission distances while operating under stringent power and cost constraints. However, as data rates and reaches increase, chromatic dispersion induces stronger inter-symbol interference and, after direct detection, frequency-selective fading, thus requiring increasingly powerful equalization. In conventional receivers, this translates into digital equalization whose complexity scales unfavorably with data rate. Photonic-domain equalization offers a hardware-based alternative that operates naturally at line rate and mitigates frequency fading. However, prior demonstrations were not readily adaptable for different rate and/or reach operation. In this paper, we experimentally demonstrate all-optical equalization across 10-46 Gbaud and 10-250 km SSMF in the C-band enabled solely through retraining of the readout layer, achieving up to four orders of magnitude BER improvement over standard DSP equalization. The demonstrator comprises a 16-node spatially multiplexed reservoir, programmable on-chip readout, and co-packaged receiver front-end. To our knowledge, this is the first co-packaged photonic reservoir receiver and the first demonstration of simultaneous baudrate- and reach-flexible equalization using a fixed-topology integrated photonic circuit.
Read the full abstract

All authors Sarah Masaad, Jakob Declercq, Stijn Sackesyn, Ruben Van Assche, Hasan Salmanian, Andrzej Polatynski, Dimitrios Chatzitheocharis, Konstantinos Vyrsokinos, Tatiana Buriakova, Christophe Caillaud, Stylianos Sygletos, Xin Yin, Peter Bienstman

Geophysics

OpenWaveLogger v2026 (OWL-v2026): an open source, low cost, easy to build, high performance logger for wave data measurements

Ocean wave models are critical for weather and climate forecasting, and accurate in-situ wave observations are essential for validating and improving these models. Open-source, community-driven buoys have democratized wave observations via telemetry in recent years, but these systems transmit only limited amounts of data. Full high-frequency time series, required to study detailed wave physics, can still in most cases only be collected in situ using data loggers. Yet open-source, low-cost logger solutions remain scarce compared to their telemetry-enabled counterparts. Here we present the Openlogartemis Wave Logger (OWL-v2026), an open-source, low-cost, easy-to-build, high-performance logger for wave data measurements. The OWL-v2026 is built from off-the-shelf components from the maker community, requiring only through-hole soldering for assembly, and totals approximately 220USD per unit. Custom firmware enables high-frequency, low-jitter logging of six-axis inertial measurement unit (IMU) data at 208 or 416Hz, and GNSS position and Doppler velocity at 10Hz, with Pulse Per Second (PPS) synchronization for accurate absolute UTC timestamping. We have successfully validated continuous logging over more than 10 days at 208Hz, a power consumption of approximately 80mA (approximately 20 days of autonomy with three D-cell lithium batteries), and absolute UTC timestamp accuracy typically better than 10ms. Though the OWL-v2026 is a purely technical contribution, it has the potential to substantially expand the availability and affordability of high-frequency in-situ wave time series, similar to how the OpenMetBuoy (OMB) (Rabault 2022) expanded the availability of telemetry-enabled wave observations and helped spark new developments in low-cost open-source buoys.
Read the full abstract

All authors Jean Rabault, Joey Voermans, Takuji Waseda, Takehiko Nose, Tsubasa Kodaira, Koya Sato, Alexander Babanin, Gaute Hope, Malte Müller, Lars Willas Dreyer, Øystein Lande, Atle Jensen, Øyvind Breivik

General Relativity and Quantum Cosmology

Reshaping the inner shadow of a Kerr black hole by a torn accretion disk

When an accretion flow extends to the event horizon, their intersection defines the contour of the inner shadow. However, the morphological evolution of this critical feature remains largely unexplored within a torn accretion disk system, a configuration comprising distinct sub-disks formed when a tilted disk is disrupted by frame-dragging. To address this, we phenomenologically construct a torn accretion disk model and numerically simulate the inner shadow of a Kerr black hole using relativistic backward ray-tracing. We discover that the torn disk geometry profoundly alters the black hole's observational signatures, inducing severe erosion of the inner shadow and generating novel features such as bifurcated shadows, crescent-like structures, and multiple orders of shadow rings. These exotic morphologies, which are predominantly governed by the spatial discontinuity between the sub-disks and the tilt angle of the outer sub-disk, are exceedingly difficult to replicate within standard equatorial accretion paradigms. Our findings demonstrate that these distinctive shadow structures hold significant potential to serve as robust diagnostic probes for torn accretion environments, simultaneously implying that relying solely on the inner shadow to test gravity theories is fundamentally insufficient.
Read the full abstract

All authors Shiyang Hu, Dan Li, Chen Deng, Kejian He

High Energy Physics (Theory)

Anisotropic drag force in finite-density QGP from charged rotating 5D black holes

We study the drag force acting on a heavy quark in a holographic plasma with rotational anisotropy and finite density. The bulk dual is the CCLP black hole of five-dimensional minimal gauged supergravity, characterised by two independent rotation parameters and electric charge. In the neutral Kerr–AdS limit, we use the principal Killing string to obtain an exact drag force for arbitrary rotation parameters. The resulting force is purely tangential but generically anisotropic, reducing to the viscous form only in the equal-spin sector. We then analyse stationary strings in the charged CCLP background perturbatively in the slow-rotation regime. A regularity analysis of the Lorentzian worldsheet fixes the angular integration constants that would otherwise remain ambiguous, yielding a finite renormalised transverse drag force with a smooth Kerr–AdS limit. We also show that, in the equal-spin sector, worldsheet regularity selects a unique co-rotating equilibrium quark and compute its renormalised free-energy shift.
Read the full abstract

Optics

Maximum Q-factor of planar inductors

On-chip inductor design plays a critical role in the advancement of radio-frequency integrated circuits (RFICs). Inductors typically occupy a substantial portion of the chip area as their performance metrics, namely, inductance density and Quality factor ($Q$-factor), are fundamentally tied to the available footprint, thereby limiting miniaturization. To better understand and quantify these limitations, we employ rigorous electromagnetic analysis together with convex optimization techniques to derive a fundamental bound on the maximum achievable $Q$-factor of electrically-small planar inductors as a function of the available design area. The analysis yields analytical expressions for the bound and, via modal analysis techniques, identifies and interprets operational regimes and scaling trends with respect to design area and material conductivity. The analysis accounts for both ohmic and radiation losses, with the latter becoming significant as the inductor size increases. A broad set of state-of-the-art inductor designs from the literature is evaluated against the established $Q$-factor upper bound, identifying designs that approach the theoretical limit as well as those with potential for further improvement. The study is extended to include the effect of kinetic inductance, which offers a promising avenue toward next-generation inductors with higher inductance densities and $Q$-factors. By establishing this benchmark, this work aims to guide and inspire the design of more efficient and compact planar inductors for high-performance RF systems.
Read the full abstract

Nuclear Theory

Investigation of Nonlinear Collective Dynamics in Relativistic Heavy-Ion Collisions Using A Multi-Phase Transport Model

The nonlinear response coefficient, $\chi_{4,22}$, is a crucial observable for probing the dynamical properties of the quark-gluon plasma (QGP). Although traditionally interpreted as a signature of medium response, recent studies suggest that $\chi_{4,22}$ also encodes information about the intrinsic initial-state configuration of the colliding nuclei. In this study, we use the A Multi-Phase Transport (AMPT) model to investigate the microscopic origin and stage-by-stage development of $\chi_{4,22}$ in $^{238}$U+$^{238}$U and $^{197}$Au+$^{197}$Au collisions at $\sqrt{s_{\rm NN}} = 200$ GeV. By tracking flow observables through the partonic cascade, quark coalescence, and hadronic rescattering phases, we map the conversion of initial geometric eccentricities into final-state momentum anisotropies. Our results demonstrate that the absolute magnitude of $\chi_{4,22}$ increases continuously during collective expansion, confirming its nature as a dynamically generated medium response. In contrast, the relative ratio of this coefficient between the U+U and Au+Au systems, $R(\chi_{4,22})$, exhibits approximate stage independence over a broad centrality range, as quantified by a constant-fit test across the three AMPT evolution stages. This indicates that the ratio reduces common medium-response effects, such as overall amplification efficiency and viscous attenuation, and therefore retains stronger sensitivity to the relative initial-state geometry. These findings provide theoretical support for using nonlinear flow ratios to constrain higher-order nuclear structure, such as hexadecapole deformation, while also clarifying the residual stage dependence and nonflow limitations relevant to precision extractions.
Read the full abstract

All authors Zhi-Jie Yang, Hao-jie Xu, Jie Zhao, Hanlin Li

Plasma Physics

The physics of ELM-free regimes in EUROfusion tokamaks

The development of operational scenarios without large Type-I ELMs is of utmost importance for the stable operation and longevity of future tokamaks. The EUROfusion tokamak exploitation program has therefore made the understanding of ELM-free regimes a major topic of exploration across all its contributing devices (ASDEX Upgrade, JET, MAST-Upgrade, TCV, and WEST). An integrated program to investigate a range of Type-I ELM-free regimes has been developed covering the enhanced D-alpha (EDA), magnetic perturbations (MP), negative triangularity (NT), quasi-continuous exhaust (QCE), quiescent H-mode (QH), the baseline small ELMs (SE), I-mode, and X-point radiator (XPR) regimes. This contribution focuses on the development and understanding of the NT and QCE regimes on ASDEX Upgrade, JET, and TCV. The importance of transport via ballooning modes in both regimes is highlighted, as well as the progress in developing access models based on ideal-MHD. In the case of the QCE, this can also be expressed as a minimum separatrix density, which corresponds well to experimentally measured separatrix densities. Particular focus is paid to the performance of the QCE in terms of the achieved pedestal top values, which, when appropriately normalised, do not differ significantly from ELMy H-mode plasmas. This, combined with the predicted minimum separatrix density for the 15 MA ITER baseline plasma, highlight the relevance of the QCE as a potential operational scenario for both ITER and future reactors.
Read the full abstract

All authors M. G. Dunne, M. Faitsch, O. Sauter, E. Viezzer, B. Labit, A. Kappatou, D. Keeling, B. Vanovac, I. Balboa, P. Bilkova, P. Bohm, D. Kos, J. Hobirk, E. Lerche, P. Lomas, S. Menmuir, T. Pütterich, L. Radovanovic, S. Saarelma, S. Silburn, D. Silvagni, E.R. Solano, H.J. Sun, A. Tookey, The ASDEX Upgrade Team, The TCV Team, The EUROfusion Tokamak Exploitation Team, JET contributors

Quantum Physics

Valley-Aware Optimal Control of Spin Shuttling Using Cryogenic Integrated Electronics

Electron shuttling is emerging as a key mechanism for enabling long-range coupling in scalable spin-qubit architectures. Bringing shuttling waveform generation into the cryostat can improve scalability, but imposes strict area and power constraints on the control electronics. Concurrently, shuttling in Si/SiGe is further limited by a spatially varying valley splitting that induces spin–valley mixing and degrades coherence. Here, we make three contributions that address these limitations jointly: (i) an end-to-end co-simulation framework that combines disorder-informed valley maps with transistor-level cryogenic circuit simulations including electronic noise; (ii) a fully integrated cryogenic shuttling-signal generator tailored to velocity modulation, enabling period-wise waveform shaping through discrete circuit settings stored in on-chip memory; and (iii) a noise-aware optimization procedure that tunes only these implementable circuit controls, using one of four discrete resistor settings per period, to generate high-fidelity shuttling sequences. Across simulated valley and noise realizations in our co-simulation framework, the optimized velocity-modulation waveforms improve transport performance, achieving an average shuttling fidelity of $99.99 \pm 0.007\%$ at $v_{\mathrm{avg}} = 20~\mathrm{m\,s^{-1}}$ over a distance of $10~\mu\mathrm{m}$, while maintaining active analog power consumption in the tens of $\mu\mathrm{W}$ during shuttling. This validates on-chip storage and replay of optimized control settings as a practical strategy to mitigate valley disorder in scalable shuttling architectures.
Read the full abstract

All authors Pau Dietz Romero, Nermine Chaabani, Lammert Duipmans, Alessandro David, Felix Motzoi, Stefan van Waasen, Lotte Geck

High Energy Physics (Phenomenology)

Dilaton-Induced Resonant Production of Ultralight Vector Dark Matter

We consider the production of ultralight vector dark matter through a dilatonic half-mass resonance in the presence of an oscillating spectator scalar. The cosmological condition is that the Floquet instability becomes efficient before the spectator contributes dominantly to the expansion. We express this condition in terms of the microscopic modulation parameter $\epsilon_i=\Phi_i/M$ and the gravitational onset fraction $r_i=\Phi_i^2/(6\Mpl^2)$. For a background with constant equation-of-state parameter $w_b$, the narrow-band result gives $\mu/H\propto a^{3w_b/2}$; the ratio therefore grows as $a^{1/2}$ during radiation domination and remains constant for matter-like expansion. Requiring delayed amplification to precede spectator domination gives the amplitude-independent bound $M/\Mpl\lesssim\sqrt6\,c_1\simeq0.31$, with $c_1\simeq1/8$ for the linear half-mass branch. An expanding-background calculation gives $a_\star<a_{\rm dom}$ for sub-Planckian $M$, whereas $M\simeq\Mpl$ delays efficient growth until after domination. Using the efficient-transfer normalization, we obtain $m_{\gamma'}\propto r_i^{-2}$, so that $m_{\gamma'}\sim10^{-20}$–$10^{-18}\,{\rm eV}$ corresponds to $r_i\sim10^{-5}$–$10^{-4}$ rather than to early spectator domination. The canonical polarization analysis shows a more infrared-localized longitudinal spectrum than the transverse spectrum, while derivative terms associated with canonical normalization change the leading Floquet exponents at order unity. Stückelberg and Higgsed realizations lead to different ultraviolet consistency conditions, including radial-mode decoupling and symmetry-restoration bounds. These conditions select a radiation-era, perturbative, infrared-dominated regime with a sub-Planckian kinetic scale for production.
Read the full abstract

All authors Imtiaz Khan, G. Mustafa, Jehanzad Zafar, Farruh Atamurotov, Ahmadjon Abdujabbarov, Chengxun Yuan

High Energy Astrophysical Phenomena

The January 2010 flare of Mrk421: Insights from a stochastic acceleration model

Mrk421 displayed its highest flux state ever observed in February of 2010 with very high TeV fluxes and interesting cross-band correlations and a spectral energy distribution (SED) evolution not entirely consistent with the standard single zone leptonic synchrotron self-Compton model. The source was already in a high state in January 2010 and displayed strong variability in the days preceding the highest state. We study the temporal evolution of the spectra in January to extract information about the particle dynamics and the physical properties of the emission region. We build up on the temporal variability and correlations studied in the previous work (MAGIC collaboration - Abe et al. 2025) and attempt to improve the SED model fits with a physics oriented approach. The multi-wavelength data was processed and the SEDs were fit using JetSeT. The SED evolution and cross band correlations were modelled using leptonic log-parabola with a low energy power-law branch (LPPL) and pile-up distributions that are predicted in a stochastic acceleration scenario. A simplified temporal evolution model was developed and fit to the SEDs and the resulting trends and phenomenology were characterised in context of theoretical literature. An expanding emission region model was also tested. We find the spectral variability to be well in agreement with stochastic acceleration. Our analysis suggests that the standard LPPL distribution develops a Maxwellian pile-up component at the transition from acceleration to cooling dominated phase on 3 nights in the dataset, as also hinted by the very-high energy and X-ray light curves. The resulting phenomenology of our sequential snapshot evolution SED model agrees well with theoretical and numerical simulation studies on temporal evolution using the diffusion equation approach.
Read the full abstract

All authors MAGIC collaboration: K. Abe, S. Abe, J. Abhir, A. Abhishek, V. A. Acciari, A. Aguasca-Cabot, I. Agudo, I. Albanese, T. Aniello, L. A. Antonelli, A. Arbet-Engels, C. Arcaro, T. T. H. Arnesen, A. Babić, C. Bakshi, U. Barres de Almeida, J. A. Barrio, L. Barrios-Jiménez, I. Batković, J. Baxter, J. Becerra González, W. Bednarek, E. Bernardini, J. Bernete, A. Berti, J. Besenrieder, C. Bigongiari, A. Biland, O. Blanch, G. Bonnoli, Ž. Bošnjak, E. Bronzini, I. Burelli, A. Campoy-Ordaz, A. Carosi, R. Carosi, M. Carretero-Castrillo, D. Cerasole, G. Ceribella, A. Cerviño, Y. Chai, G. Chon, A. Cifuentes Santos, J. L. Contreras, J. Cortina, S. Covino, G. D'Amico, P. Da Vela, F. Dazzi, A. De Angelis, B. De Lotto, R. de Menezes, M. Delfino, J. Delgado, C. Delgado Mendez, F. Di Pierro, R. Di Tria, L. Di Venere, A. Dinesh, D. Dominis Prester, A. Donini, D. Dorner, M. Doro, L. Eisenberger, D. Elsaesser, L. Foffano, L. Font, F. Frías García-Lago, Y. Fukazawa, S. García Soto, S. Gasparyan, M. Gaug, J. G. Giesbrecht Paiva, N. Giglietto, F. Giordano, P. Gliwny, T. Gradetzke, R. Grau, J. G. Green, P. Günther, D. Hadasch, A. Hahn, G. Harutyunyan, T. Hassan, J. Herrera Llorente, D. Hrupec, D. Israyelyan, J. Jahanvi, I. Jiménez Martínez, J. Jiménez Quiles, J. Jormanainen, S. Kankkunen, T. Kayanoki, G. W. Kluge, J. Konrad, P. M. Kouch, H. Kubo, J. Kushida, M. Láinez, A. Lamastra, E. Lindfors, S. Lombardi, F. Longo, R. López-Coto, M. López-Moya, A. López-Oramas, S. Loporchio, L. Lulić, E. Lyard, P. Majumdar, M. Makariev, M. Mallamaci, G. Maneva, M. Manganaro, S. Mangano, M. Mariotti, M. Martínez, P. Maruševec, D. Mazin, S. Menchiari, J. Méndez Gallego, S. Menon, D. Miceli, J. M. Miranda, R. Mirzoyan, M. Molero González, E. Molina, H. A. Mondal, A. Moralejo, C. Nanci, A. Negro, V. Neustroev, M. Nievas Rosillo, C. Nigro, L. Nikolić, K. Nilsson, S. Nozaki, A. Okumura, J. Otero-Santos, S. Paiano, D. Paneque, R. Paoletti, J. M. Paredes, M. Peresano, M. Persic, M. Pihet, G. Pirola, F. Podobnik, P. G. Prada Moroni, E. Prandini, W. Rhode, M. Ribó, J. Rico, A. Roy, N. Sahakyan, F. G. Saturni, F. Schiavone, K. Schmitz, F. Schmuckermaier, A. Sciaccaluga, G. Silvestri, A. Simongini, J. Sitarek, V. Sliusar, D. Sobczynska, A. Stamerra, J. Strišković, D. Strom, Y. Suda, M. Takahashi, R. Takeishi, J. Tartera Barberà, P. Temnikov, T. Terzić, M. Teshima, A. Tutone, S. Ubach, M. Vazquez Acosta, S. Ventura, G. Verna, I. Viale, A. Vigliano, C. F. Vigorito, E. Visentin, V. Vitale, M. Vorbrugg, I. Vovk, R. Walter, C. Walther, F. Wersig, P. K. H. Yeung, M. Perri, A. Tramacere

Mesoscale and Nanoscale Physics

Spin-wave hybridization in bismuth iron garnet Mie spheres induced by the inverse Faraday effect

We show that the inverse Faraday effect can be used to engineer dipole–exchange spin-wave spectra in ferrimagnetic bismuth iron garnet (BIG) Mie spheres. Internal optical Mie resonances generate spatially structured effective magnetic fields whose symmetry is inherited from the optical near field and which act as controllable perturbations of the magnon Hamiltonian. For circularly polarized light incident collinearly with the equilibrium magnetization, the optical perturbation preserves axial symmetry while breaking mirror parity, thereby enabling hybridization of magnon modes with opposite parity within the same $\widehat{J}_z$ sector. Using coupled-mode theory, we derive the corresponding avoided-crossing spectrum and analytical expressions for the induced level splittings, which scale linearly with pump intensity. Numerical calculations for BIG spheres confirm the predicted hybridization and show that the splitting is maximized near optical Mie resonances, where field enhancement and magneto-optical response are strongest. We further discuss the roles of damping, linewidth, and heating, and show that the predicted MHz–hundreds-of-MHz splittings should be observable under realistic conditions. These results identify BIG Mie resonators as a promising platform for symmetry-selective optical control of spin-wave spectra.
Read the full abstract

All authors Fedor Shuklin, Khristina Albitskaya, Alexander Chernov, Mihail Petrov

Solar and Stellar Astrophysics

Mid-infrared JWST spectra of carbon stars in the Large Magellanic Cloud

Mid-infrared spectra from the Medium Resolution Spectrometer on the James Webb Space Telescope have revealed the molecular chemistry of carbon stars in the Large Magellanic Cloud with better resolution and sensitivity than previously possible. Our sample spans a range of dust-production rates and includes three relatively dust-free semiregular variables and six dustier Mira variables. All were observed 15-20 yr earlier with the Infrared Spectrograph on the Spitzer Space Telescope at lower spectral resolution. The new spectra show that the C3 molecule is responsible for a strong absorption band centered at 5.2 um. CS is clearly present in some of the sample, especially the stars with less dust. HCN also appears to be present. Some of the spectra have changed significantly between the Spitzer epoch and the MRS observations in 2023 and 2024, and in most cases these changes can be attributed to the stellar pulsation cycle. One exception is the disappearance of a dust emission feature at ~18 um in one of the Miras. The new spectra reveal a dip centered at ~10 um, which could arise either from an unknown carrier or from variable molecular emission to the red and blue. The presence of this spectral structure on the short-wavelength side of the SiC dust emission feature at ~11.3 um along with the broad C2H2 band centered at 14 um raise the possibility that some previously reported detections of weak SiC dust emission in other carbon stars may not be real.
Read the full abstract

All authors G. C. Sloan, B. Aringer, Kathleen E. Kraemer, J. Cami, K. Eriksson, S. Hoefner, K. Justtanont, E. Lagadec, Paola Marigo, M. Matsuura, I. McDonald, E. J. Montiel, R. Sahai, A. A. Zijlstra

Chemical Physics

Restoring the Conical Intersection Topology using Convex Density Functional Theory

Conical intersections are central to the description of photophysics and photochemistry. Nevertheless, in non-adiabatic molecular dynamics simulations, they are fundamentally challenging for single-reference electronic structure methods. Density functional theory (DFT) and its time-dependent extension (TDDFT) represent the most widely used theoretical approaches in physics, chemistry, and biology. However, the treatment of ground and excited states as separate problems leads to breakdowns in the topological structure of potential energy surfaces near conical intersections. In this work, we solve this long-standing issue by presenting Convex DFT, a framework that, by explicitly enforcing convexity of the variational problem within an appropriately defined subspace, guarantees a unique and continuous electronic solution across regions of degeneracies. We demonstrate that Convex DFT yields smooth and physically meaningful intersection seams by comparison with multireference wave function methods. In this way, we establish the method as a robust and computationally efficient DFT approach for treating electronically degenerate regions. These developments represent a critical step toward reliable non-adiabatic simulations beyond the limitations of conventional TDDFT.
Read the full abstract

Atmospheric and Oceanic Physics

Mechanistic Interpretability Tool for AI Weather Models

Artificial Intelligence (AI) weather models are improving rapidly, and their forecasts are already competitive with long-established traditional Numerical Weather Prediction (NWP). To build confidence in this new methodology, it is critical that we understand how these predictions are generated. This is a huge challenge as these AI weather models remain largely black boxes. In other areas of Machine Learning (ML), mechanistic interpretability has emerged as a framework for understanding ML predictions by analysing the building blocks responsible for them. Here we present an open-source, highly adaptable tool which incorporates concepts from mechanistic interpretability. The tool organises internal latent representations from the model processor and allows for initial analyses, including cosine similarity and Principal Component Analysis (PCA), enabling the user to identify directions in latent space potentially associated with meteorological features. Applying our tool to the graph neural network GraphCast, we present preliminary case studies for mid-latitude synoptic-scale waves and specific humidity. These demonstrate the tool's ability to identify linear combinations of latent channels that appear to correspond to interpretable features.
Read the full abstract