Peer Revenue Returns subject to peer review

Papers

Fresh from arXiv, typeset properly. Highlighted words trade on the market.

Physics

Watch Physics (sign in to use)

Monday 13 April

Computational Physics · Cross-listed from math.NA

Data-efficient extraction of optical properties from 3D Monte Carlo TPSFs using Bi-LSTM transfer learning

Time-Resolved Spectroscopy (TRS) is a powerful modality for non-invasive characterization of turbid media. However, extracting optical properties, absorption $\mu_a$ and reduced scattering $\mu_s'$, from 3D stochastic measurements remains computationally expensive for real-time applications. In this paper, we propose a data-efficient, physics-informed transfer learning strategy using a Bidirectional Long Short-Term Memory (Bi-LSTM) network. By leveraging a fast deterministic solver to establish a physical prior before fine-tuning on a restricted set of 3D Monte Carlo simulations, our model successfully bridges the analytical-to-stochastic domain gap. The proposed method eliminates the systematic bias of analytical models while maintaining a competitive error with near-instantaneous inference time.
Read the full abstract

All authors Joubine Aghili, Rémi Imbach, Anne Pallarès, Philippe Schmitt, Wilfried Uhring

Applied Physics · Cross-listed from eess.SY

Air supply control for proton exchange membrane fuel cells without explicit modeling

Our objective is to study the performance and robustness of the model-free strategy for controlling the oxygen stoichiometry of a fuel cell air supply system with a proton exchange membrane. After reviewing the literature on modeling and control of this process, the model-free approach appears to be a good candidate because, on the one hand, it allows straightforward real-time adaptation to track operating points and, on the other hand, it requires a low computational burden, which is attractive for industrial applications. Numerical simulations for two scenarios (constant and variable oxygen stoichiometry) with two current profiles reveal satisfactory performance of the model-free control law. The robustness is addressed by considering significant variations in the parameters of the proton exchange membrane air supply system.
Read the full abstract

All authors Méziane Ait Ziane, Michel Zasadzinski, Cédric Join, Michel Fliess

Nuclear Theory

Impact of Effective Nucleon Mass and Multineutron States on the Equation of State for Core-Collapse Supernovae

In this study, we investigate the impact of effective nucleon mass and the existence of the dineutron $(\mathrm{^{2}n})$ and the tetraneutron $(\mathrm{^{4}n})$ on the thermodynamic properties and nuclear compositions by constructing new equations of state. Our results indicate that the model with a larger effective nucleon mass slightly alters the nuclear composition in neutron-rich environments primarily due to differences in the symmetry energy: the mass fractions of unbound neutrons, protons, and heavy nuclei increase. The impact on the thermodynamic properties is negligible, except for the chemical potentials. On the other hand, multineutron states become prominent at high densities in neutron-rich environments, leading to a substantial reduction in the unbound neutron fraction. This depletion lowers the chemical potential of unbound neutrons, which in turn reduces the abundance of neutron-rich nuclei. Consequently, the number of unbound protons increases, leading to a corresponding rise in proton chemical potential. These shifts in chemical potentials promote the formation of heavy nuclei with larger mass and atomic numbers. Ultimately, this compositional shift results in a lower free energy, primarily driven by the emergence of these heavy nuclei.
Read the full abstract

All authors Tatsuya Matsuki, Shun Furusawa, Kohsuke Sumiyoshi, Hong Shen, Katsuhiko Suzuki

Materials Science

Investigating nucleation-driven phase transitions in neopentyl molecular crystals using infrared thermography and polarised light microscopy

Sustainable solid-state refrigerants based on barocaloric materials are often limited by thermal hysteresis associated with supercooling effects. Here, we present imaging methods to investigate and compare thermal behaviour and transition kinetics of the barocaloric molecular crystal neopentyl glycol (NPG) with those of a lightly doped derivative, NPG$_{0.99}$PE$_{0.01}$, which incorporates 1 mol % pentaerythritol (PE). We use temperature-dependent polarised light (PL) microscopy and infrared (IR) thermography to correlate phase transition kinetics and local heat-flow with the bulk thermodynamic response obtained from calorimetry. We show that the doped system exhibits reduced supercooling and thermal hysteresis, attributed to increased microstructural disorder and an increase in the number of nucleation events. These findings provide insight into the design of low-hysteresis barocaloric materials for high-efficiency solid-state cooling applications.
Read the full abstract

All authors Frederic Rendell-Bhatti, Vinzent G. Hana, Csongor Joba, David Boldrin, Donald A. MacLaren

Statistical Mechanics

Exact criteria for ground-state overlap dominance and dynamical quantum phase transitions

It was recently conjectured and verified for the transverse-field Ising model [Phys. Rev. B 113, 165102 (2026)] that, after a sudden quench within the same equilibrium phase, the initial ground state has its largest overlap with the final ground state. We show that this phase-based criterion is generally false, even in translationally invariant free-fermion systems. For Hamiltonians that factorize into independent $2\times 2$ momentum sectors, we derive the exact necessary-and-sufficient condition for ground-state overlap dominance: the initial and final sector Bloch vectors must have positive dot product for every momentum. This result proves the conjecture in classes where same-phase quenches enforce this geometric condition, but gives explicit same-phase counterexamples in Kitaev chains, where excited final eigenstates can dominate the overlap distribution. We further show that the same obstruction controls real-time Fisher-zero crossings, allowing dynamical quantum phase transitions without crossing an equilibrium phase boundary.
Read the full abstract

Fluid Dynamics

Compressible turbulent boundary layers over two-dimensional square-rib roughness

Direct numerical simulations are performed to investigate the combined effects of surface roughness and wall heat transfer on spatially developing compressible turbulent boundary layers at $Ma=2.5$. The roughness consists of transverse square bars with $\lambda_x/k=8$ and $k^+ \approx 35$, under adiabatic and wall-cooling ($T_w/T_r = 0.5$) conditions. Dynamically, the conventional zero-moment method fails to yield a consistent zero-plane displacement for the present cavity-type roughness. Instead, a fitting-based optimization procedure is proposed to determine the kinematic virtual origin, which successfully restores the logarithmic behavior. Based on this displacement, Griffin–Fu–Moin (GFM) transformation outperforms the classical van Driest transformation in recovering outer-layer similarity for the velocity defect. Thermodynamically, the physical disparity between momentum form drag and the absence of a corresponding heat transfer mechanism disrupts the classical Reynolds analogy. The effective turbulent Prandtl number ($Pr_e$) deviates severely from unity within the roughness sublayer, leading to the breakdown of the classical Generalized Reynolds Analogy (GRA). To address this, a modified rough-wall GRA (rGRA) is formulated by introducing an equivalent slip-plane or reference-point boundary conditions, which accurately reconstructs the temperature-velocity relationship by bypassing the near-wall thermal heterogeneity. Finally, the refined strong Reynolds analogy (RSRA) is shown to maintain predictive accuracy for fluctuation intensities in the outer layer despite near-wall modulation by roughness and cooling.
Read the full abstract

Quantum Physics

When T-Depth Misleads: Predicting Fault-Tolerant Quantum Execution Slowdown under Magic-State Delivery Constraints

The efficient execution of fault-tolerant quantum algorithms is fundamentally limited by the production rate of magic states required for non-Clifford operations. While circuit optimization typically targets T-depth, static T-depth does not reliably predict executable performance under bounded T-state delivery. We introduce a model that captures demand-supply imbalance using two key quantities: slack ratio, a structural indicator of scheduling flexibility, and Delta_max, a measure of cumulative demand surplus. We show that Delta_max is a strong schedule-level indicator of execution slowdown and yields a provable lower bound on executable makespan for a fixed schedule. Empirical evaluation on constructed directed acyclic graph (DAG) families, with arithmetic circuits and exact quantum Fourier transform (QFT) traces providing additional grounding, shows that slack ratio is a stronger structural predictor than T-depth for stall and inversion risk, while Delta_max is the strongest predictor of slowdown. Across 4,904 instances, the lower bound shows zero violations, with 88.9% of cases within one cycle. These results highlight the importance of explicitly modeling delivery constraints in fault-tolerant quantum compilation.
Read the full abstract

Earth and Planetary Astrophysics

Compact Hydrogen Sulfide Emission Indicates Sulfur-bearing Ice Sublimation in the Inner Disk of HD 163296

The sulfur chemistry in protoplanetary disks directly affects the composition and potential habitability of nascent planets, but its volatile inventory remains highly uncertain. Here, we present deep Atacama Large Millimeter/submillimeter Array (ALMA) observations of hydrogen sulfide (H$_2$S) along with SO and SO$_2$ in the disk around HD 163296 at an angular resolution of $\approx0.\!\!^{\prime\prime}3$ (or $\approx$30 au). We detect unresolved, compact emission of H$_2$S and SO (and tentatively SO$_2$) at the disk center with a broad line width of $\sim$40 km s$^{-1}$, suggesting that the emission is originating from the innermost regions. By fitting line profiles with a geometrically-thin Keplerian-rotating disk model, we constrain the emitting radii and gas temperatures of these molecules to be $\approx$3-5 au and $\gtrsim$90-120 K, respectively, consistent with sublimation of sulfur-bearing molecules along with water ice in the inner warm region. While the higher or comparable column density of H$_2$S with respect to SO and SO$_2$ indicates that H$_2$S is an important volatile sulfur reservoir in the disk, the limited constraints mean that we cannot rule out significantly depleted volatile sulfur as also commonly inferred in other planet-forming disks. Further observations are needed to better constrain disk sulfur inventory, unravel how sulfur compounds are reprocessed in disks, and shed light on the nature of less-volatile species, such as salts and sulfide minerals, which may occupy a significant portion of sulfur budget.
Read the full abstract

All authors Yoshihide Yamato, Yuri Aikawa, Kenji Furuya, Charles J. Law, Karin I. Öberg, Chunhua Qi, Cataldi Gianni, Romane Le Gal, Shota Notsu, Viviana V. Guzmán, Jane Huang

Earth and Planetary Astrophysics

From Dust to Planets – A Chemical Perspective

Chemical and chronological information preserved in meteorites permits the reconstruction of events and processes in the solar nebula from the formation of the first solids to the accretion of planetary bodies and their subsequent differentiation. The path from a gas-dust cloud to differentiated planets includes intervals of steady evolution interrupted by singular events that dramatically altered this steady path, leading to planetary bodies with distinct chemical compositions and different degrees of internal differentiation. The dominant continuous process in the early Solar System was the cooling of the gas-dust cloud, which caused a steady condensation of elements into solid compounds and a continuous increase in the dust/gas ratio. Planetesimal formation started within less than 1 Ma of Solar System formation and continued for ca. 3 Ma apparently in random regions within the disk. The first planetesimals most likely formed due to streaming instabilities and created gaps in the gas-dust disk that prevented significant element exchange. Later planetesimals formed by accretion of chondrules that had developed in the dust rings by bow shocks. The Earth formed by early accretion of volatile-poor material and a later collision with a Mars-sized volatile richer body after proto-Earth had formed a metal core. This chance event provided the chemical conditions that transformed the Earth into a habitable planet.
Read the full abstract

All authors Klaus Mezger, Jonas Pape, Aryavart Anand, Pascal M. Kruttasch, Hauke Vollstaedt, Jan Hoffmann

High Energy Physics (Theory)

GlobalCY I: A JAX Framework for Globally Defined and Symmetry-Aware Neural Kähler Potentials

We present GlobalCY, a JAX-based framework for globally defined and symmetry-aware neural Kähler-potential models on projective hypersurface Calabi–Yau geometries. The central problem is that local-input neural Kähler-potential models can train successfully while still failing the geometry-sensitive diagnostics that matter in hard quartic regimes, especially near singular and near-singular members of the Cefalú family. To study this, we compare three model families – a local-input baseline, a globally defined invariant model, and a symmetry-aware global model – on the hard Cefalú cases $\lambda=0.75$ and $\lambda=1.0$ using a fixed multi-seed protocol and a geometry-aware diagnostic suite. In this benchmark, the globally defined invariant model is the strongest overall family, outperforming the local baseline on the two clearest geometric comparison metrics, negative-eigenvalue frequency and projective-invariance drift, in both cases. The gains are strongest at $\lambda=0.75$, while $\lambda=1.0$ remains more difficult. The current symmetry-aware model improves projective-invariance drift relative to the local baseline, but does not yet surpass the plain global invariant model. These results show that global invariant structure is a meaningful architectural constraint for learned Kähler-potential modeling in hard quartic Calabi–Yau settings.
Read the full abstract

Fluid Dynamics · Cross-listed from cs.CE

One Scale at a Time: Scale-Autoregressive Modeling for Fluid Flow Distributions

Analyzing unsteady fluid flows often requires access to the full distribution of possible temporal states, yet conventional PDE solvers are computationally prohibitive and learned time-stepping surrogates quickly accumulate error over long rollouts. Generative models avoid compounding error by sampling states independently, but diffusion and flow-matching methods, while accurate, are limited by the cost of many evaluations over the entire mesh. We introduce scale-autoregressive modeling (SAR) for sampling flows on unstructured meshes hierarchically from coarse to fine: it first generates a low-resolution field, then refines it by progressively sampling higher resolutions conditioned on coarser predictions. This coarse-to-fine factorization improves efficiency by concentrating computation at coarser scales, where uncertainty is greatest, while requiring fewer steps at finer scales. Across unsteady-flow benchmarks of varying complexity, SAR attains substantially lower distributional error and higher per-sample accuracy than state-of-the-art diffusion models based on multi-scale GNNs, while matching or surpassing a flow-matching Transolver (a linear-time transformer) yet running 2-7x faster than this depending on the task. Overall, SAR provides a practical tool for fast and accurate estimation of statistical flow quantities (e.g., turbulent kinetic energy and two-point correlations) in real-world settings.
Read the full abstract

Materials Science

Revealing Dislocation Interactions Controlling Mechanical Properties of Metals

During plastic deformation, metals change shape while continuously becoming stronger. The microscopic origin of these processes lies in the proliferation and movement of line defects, dislocations, and the subsequent self-organisation and pinning of dislocations on lattice imperfections, including other dislocations. The nature of these multiscale processes has remained elusive because in situ observations have not been feasible. We present 3D movies of how dislocations pile up near an obstacle, deeply within a mm-sized pure Al sample and during tensile deformation. Cross-slip is found to provide a mechanism for the dislocations to escape the pile-up, leading to pronounced intermittent behaviour. Such data support a new generation of dislocation dynamics and micro-mechanics modelling.
Read the full abstract

All authors Felix Frankus, Sina Borgi, Albert Zelenika, Basit Ali, Raquel Rodriguez-Lamas, Henning Friis Poulsen, Grethe Winther

General Relativity and Quantum Cosmology

Asymptotic Throat: The Geometric Inevitability of Regular Black Holes

We reveal that a fundamental minimal length naturally replaces the Schwarzschild singularity with future infinity, formalizing the “asymptotic throat” as a geometric inevitability. This scheme avoids the topology changes, multiple horizons, and universe towers characteristic of existing regular black hole models. We establish a general regularization framework, construct explicit examples with their physical sources, and show that the surface gravity and Hawking temperature remain unaltered. The asymptotic throat thus provides a pristine classical bedrock for future quantum gravity investigations.
Read the full abstract

Statistical Mechanics

Absence of thermalization after a local quench and strong violation of the eigenstate thermalization hypothesis

Absence of thermalization after a global quantum quench is a well-established numerical observation in integrable many-body systems, and can be empirically related to a violation of the eigenstate thermalization hypothesis (ETH) in such models. Still, in many of those examples a weaker version of the conventional ETH (wETH) has been numerically reported or even rigorously proven. In this paper we show analytically and illustrate numerically that the absence of thermalization is already possible after a local quench. A closely related finding is a strong violation of the ETH, meaning that not even the wETH is fulfilled anymore. In our analytical explorations we focus on XX-spin-chain models with open boundary conditions, where the local quench is generated by initiating the system in thermal equilibrium and then suddenly switching on (or slightly changing) a single-spin impurity either at the end or in the center of the chain. Numerically we observe qualitatively similar phenomena also for more general XXZ-models in the case of an end-impurity, but not in the case of a central impurity.
Read the full abstract

Instrumentation and Detectors

Proposal for a new spectrometer at ESS: Njord and Remora

Many of the most interesting scientific subjects are also the hardest to study with neutrons. Metal-organic frameworks, organic superconductors, quantum magnets, pressure-tuned materials, are systems where the relevant signals are weak, the samples are tiny, or the experiments need extreme sample environments such as pressure cells and high-field cryomagnets. Existing instruments often run into practical limits before the science is exhausted. For some questions the samples are simply too small; for others, the signal is buried in background or the required measurement time becomes prohibitive. This is both a scientific opportunity and a challenge for the European neutron scattering community. We present Njord and Remora as a paired instrument concept for the European Spallation Source (ESS). The proposal focuses on two linked problems: important science cases are being limited by neutron flux and sample geometry, and the community also needs more beamtime. Njord addresses the first by pushing the available brightness into a tightly focused beam, while Remora uses the remaining spectral window to add a complementary spectrometer on the same beamport.
Read the full abstract

All authors E. Fogh, N.L. Amin, G.S. Tucker, M. Aouane, R. Georgii, J. Voigt, R. Toft-Petersen

Nuclear Theory

Improved quasiparticle nuclear Hamiltonians for quantum computing

Quantum computing is increasingly offering concrete solutions toward the simulation of nuclear structure, with the potential to overcome the exponential scaling that limits classical diagonalization methods in large spaces. A particularly efficient encoding scheme, based on collective like-nucleon pairing modes, reduces the qubit requirements by half and avoids the non-local operator strings of standard fermion-to-qubit mappings. While this quasiparticle framework provides accurate results for semimagic nuclei, it does not adequately describe open-shell systems where proton-neutron correlations become important. In this work, we apply Brillouin-Wigner perturbation theory to systematically improve the quasiparticle description of open-shell nuclei in the $sd$ shell, reaching an energy relative error below $0.2\%$ compared to the nuclear shell model. Furthermore, to make the effective Hamiltonian suitable for quantum simulation, we introduce a mean-field Hartree-Fock approximation of the non-quasiparticle resolvent, achieving ground-state energies typically within $2\%$ of the exact shell-model result. This represents a systematic improvement over the bare quasiparticle Hamiltonian while remaining within the reach of near-term quantum devices.
Read the full abstract

Quantum Physics

From GDSII to Wafer: EDA Design Flow and Data Conversion for Wafer-Scale Manufacturing of Superconducting Quantum Chips

Superconducting quantum computing is advancing toward the thousand- and even million-qubit regime, making wafer-scale fabrication an essential pathway for achieving large-scale, cost-effective quantum processors. This manufacturing paradigm imposes new requirements on quantum-chip electronic design automation (Q-EDA): design tools must not only generate layouts (GDSII files) that satisfy quantum-circuit physical constraints but also ensure that the design data can be seamlessly converted into a complete set of manufacturing files executable by a wafer foundry, thereby enabling reliable translation from design intent to physical chip. This paper focuses on this critical data-conversion pipeline and presents a systematic treatment of the Q-EDA technology stack for wafer-scale fabrication. Starting from GDSII as the single authoritative data source, we analyze the key stages including process-design-kit (PDK)-based design rule checking (DRC), layout-versus-schematic (LVS) verification, design for manufacturability (DFM) optimization, wafer layout planning, and mask data preparation (MDP). We describe the concrete architecture of a Q-EDA system, present nine quantum-specific DRC rules together with their physical underpinnings and a multi-layer process stack model, and benchmark the manufacturing data-flow coverage of mainstream Q-EDA tools. Finally, we discuss the core challenges and future directions in this field.
Read the full abstract

Quantum Physics

Quantum Sensing with Joint Emitter-Fluorescence Measurements

We present an analytically tractable model of a driven quantum harmonic emitter, such as an oscillating charged dipole, emitting radiation via resonance fluorescence. With this model we are able to characterize the quantum mechanical correlations that are built up at early times between the drive, the resonant emitter, and its fluorescence. We describe detection strategies that can reveal these quantum signatures in experiments by performing joint measurements on the quantum emitter and its fluorescence field. In particular, we show that simultaneous quantum measurements of a driven quantum emitter and its fluorescence can be used to probe the quantum noise of the driving field, relative to the maximally classical coherent state of the driving field, in short-time experiments. We conclude by discussing the applications to quantum sensing in quantum optical, quantum acoustic, and quantum gravitational scenarios of interest.
Read the full abstract

Materials Science

Ru Alloying in Ni/Al Reactive Multilayers: Experimental Observations and Molecular Dynamics Simulations

Reactive multilayer thin films, a class of energetic materials, are increasingly recognized for their potential in joining applications, utilizing the chemical energy released as heat during exothermic reactions. These materials hold also promise for additional diverse technological applications, which require precise control over heat release rates and reaction propagation velocities. The microstructural properties of reactive multilayers play a critical role in determining their chemical reaction behavior. Among these, Ni/Al reactive multilayers have been extensively studied and used due to their favorable characteristics. In this study, we explore the incorporation of ruthenium (Ru) as a co-alloying element with nickel (Ni) in the Ni/Al system to investigate its impact on the materials properties, with a particular focus on reaction velocity and temperature. Ru enhances the reaction rates, but also causes a composition dependent phase transition in the as-deposited state from fcc to hcp. Additionally, molecular dynamics simulations are employed to examine the effects of Ru co-alloying with Ni, providing deeper insights into the underlying mechanisms. This work aims to advance the understanding of Ru's role in influencing the performance of Al/Ni-based reactive multilayers for advanced applications.
Read the full abstract

All authors Nensi Toncich, Ankit Yadav, Jan Fikar, Ralph Spolenak

Astrophysics of Galaxies

Extragalactic microlensing through Ultra Diffuse Galaxies

Stellar microlensing is a powerful method to constrain compact dark matter models, uncover binary stars, and exoplanets during caustic crossing events. At cosmological distances, James-Webb Space Telescope (JWST) is routinely detecting microlensed giant stars in highly magnified galaxies behind massive lensing clusters. Here, we explore for the first time microlensing in modest redshift galaxies commonly seen through local Ultra Diffuse Galaxies (UDGs). Using the UDG NGC1052-DF2 as a proof-of-concept, we find that detecting microlensing events through UDGs is possible. Euclid is ideal for identifying samples of low-redshift star-forming galaxies seen through local galaxies for deeper cadenced follow-up, where our zeroth-order calculation estimates that $\mathcal{O}(1-10)$ events per year are expected over the whole sky under the monitoring of LSST, assuming all UDGs share similar distance and stellar content as NGC1052-DF2. Such measurements can help settle the DM issue for UDG galaxies by providing a stellar mass estimate weighted more by the low end of the stellar initial mass function (IMF) than standard stellar synthesis estimates. Note, lower efficiency is estimated for JWST of $\sim 5.6\times10^{-2}\,\textrm{yr}^{-1}$ over its five background galaxies is expected for typical JWST$\sim29$\,mag visits, and a low Vera Rubin Legacy Survey of Space and Time (LSST) detection rate of$\sim 0.03\,\textrm{yr}^{-1}$ such that NGC1052-DF2 might not be a prime target given its lack of low-redshift background galaxies.
Read the full abstract

All authors Sung Kei Li, Thomas Broadhurst, Jose M. Diego, Jeremy Lim, Jose M. Palencia, James Nianias, Jiashuo Zhang

Mesoscale and Nanoscale Physics

Strain-Induced Curvature in Monolayer Graphene: Effects on Electronic Structure, Phonon Dynamics, and Lattice Thermal Conductivity

We present a comprehensive set of calculations to investigate the effect of strain-induced x-y topological perturbation in the monolayer graphene sheet. We show that the induced curvature with the defined strain constraint, energetically stabilizes the systems. The electronic properties are modified when the amplitude of the curvature of the sheet increases, which induces Van Hove singularities of the electronic Density of States to approach the Fermi energy. The highly curved system exhibits coexisting flat and linear dispersions close to the Fermi level, which is a promising feature for thermoelectric applications. We also demonstrate, through the phonon dispersion curves, that respective systems are dynamically stable within the studied range of strains/curvatures. Moreover, the flexural acoustic mode transitions from quadratic to linear dispersion under strain, mimicking the 3D behavior and enhancing phonon scattering. The increase of phonon scattering will therefore decrease the value of the lattice thermal conductivity, $\kappa_L$. Such results allows us to conclude that it is possible to tune $\kappa_L$ by applying x-y strain to the monolayer sheet, and inducing different topological curvatures.
Read the full abstract

All authors M. C. Santos, E. Lora da Silva, D. S. Baptista, T. Santos, M. Molinari, F. J. Manjón, Yin Cui, Xidong Lin, Tao Yang

Mesoscale and Nanoscale Physics

Ultrafast ghost Hall states in a 2d altermagnet

Two-dimensional materials that exhibit optically active spin and valley degrees of freedom represent one of the most fascinating – and potentially most technologically useful – platforms for the ultrafast interaction of light and matter. Here we show, via the example of Cr$_2$SO, that two dimensional altermagnets host valley states controllable by femtosecond laser light: linearly polarized light pulses excite charge at one of two inequivalent valleys, with which valley charge is excited at determined by the polarization vector direction. This underpins a rich spin and valley physics including: (i) valleytronics $-$ the generation of nearly 100$\%$ spin polarized valley currents, as well as (ii) a "ghost Hall" effect $-$ the ultrafast creation of states in which spin and charge currents are orthogonal without invoking Hall physics. Our findings establish 2d altermagents as a platform providing a new route for the control of spin- and charge currents at ultrafast times.
Read the full abstract

All authors Ruikai Wu, Deepika Gill, Sangeeta Sharma, Sam Shallcross

Optics

Artificial-atom arrays in moire superlattices for quantum optics

Solid-state platforms are particularly attractive for quantum optics because they facilitate on-chip integration and are compatible with established semiconductor and photonic technologies. However, a major challenge in solid-state quantum optics is the fabrication of arrays of identical emitters, such as quantum dots. In this work, we propose moire superlattices as a novel solid-state platform for manipulating light at the single-photon level. Moire superlattices form arrays of artificial-atom states characterized by nearly identical optical transition energies, tunable spacing, and highly adjustable electronic structures. They naturally operate as atomically thin, scalable, periodic emitters, making them ideal for quantum applications. Additionally, the extensive materials database of moire superlattices offers spectral coverage spanning a broad range of optical wavelengths.
Read the full abstract

Nuclear Theory

Emulator-Assisted Nuclear DFT Inference and Its Consequences for the Structure of Neutron Stars

Nuclear density functional theory provides a unified description of finite nuclei and bulk nuclear matter, and is widely used to model the neutron star equation of state. However, extrapolations to supra-saturation densities require a quantified treatment of uncertainties arising from parameter estimation and functional choices. We present an updated Bayesian inference of a Skyrme energy density functional augmented by a flexible meta-model density dependence at high density. Nuclear observables are computed using a Gaussian emulator of the publicly available Milano HFBCS-QRPA code, enabling efficient exploration of a high-dimensional parameter space. Relative to previous analyses, we extend the calibration set with isospin-sensitive data, including masses and charge radii along selected Ca and Sn isotopic chains, and updated constraints from giant monopole resonances. The resulting posteriors are further constrained by ab initio neutron-matter calculations and astrophysical observations, including recent NICER measurements, yielding consistent crust and core properties of catalyzed NS compatible with current constraints. Bulk nuclear-matter parameters are well approximated by a multivariate Gaussian with covariance matrix provided for direct reuse, while several finite-nucleus parameters exhibit pronounced non-Gaussianity.
Read the full abstract

All authors Pietro Klausner, Marco Antonelli, Gianluca Colò, Francesca Gulminelli, Xavier Roca-Maza, Enrico Vigezzi

General Relativity and Quantum Cosmology

Charged Black Holes in KR-gravity Surrounded by Perfect Fluid Dark Matter

In this work, we systematically investigate the null geodesics of electrically charged black holes in a gravitational framework that incorporates Lorentz violation induced by a background Kalb-Ramond (KR) field, in the presence of perfect-fluid dark matter. The properties of the photon sphere, black hole shadow, and photon trajectories are analyzed in detail. Furthermore, to explore the combined effects of Lorentz violation and dark matter on the motion of neutral test particles, we examine the innermost stable circular orbit (ISCO) in this spacetime. In addition, the epicyclic frequencies of test particles are studied to gain further insight into the dynamical behavior of particle motion around these black holes. The main analytical results are complemented by a phenomenological QPO analysis, a thermodynamic investigation, and a discussion of the sparsity of Hawking radiation, allowing us to connect optical, dynamical, and thermodynamic signatures within a single framework.
Read the full abstract

Physics and Society

Strategy evolution on networks under payoff uncertainty and risk preference

Cooperation is a key driver of human social progress. Studies of the evolution of cooperation typically assume a deterministic outcome for social interactions. But in real-world social interactions, interaction outcomes are often subject to stochastic perturbations arising from open environments. Individuals may show different attitudes towards such uncertainty, some are risk-seeking, while others tend to be risk-averse. Here we investigate how risk preference towards uncertain payoffs affects the evolution of cooperation on social networks, where uncertainty originates from random punishment of defectors initiated by cooperators. We provide an analytical treatment of how the distribution of risk preference among individuals alters the threshold required for cooperation. We find that, at the population level, risk-averse behavior promotes or even rescues cooperation. At the node level, variation in risk preference has a significant impact when it occurs on nodes with high degree centrality. When nodes have the same degree centrality, the nodes with lower betweenness centrality exhibit a stronger effect on strategy evolution. Our analysis reveals how risk preference, together with spatial structure, jointly shapes and potentially reverses the evolutionary dynamics of cooperation.
Read the full abstract

Quantum Physics

Analytical Theory of Greedy Peeling for Bivariate Bicycle Codes and Two-Shot Streaming Decoding

We present an analytical theory of greedy peeling decoding for bivariate bicycle (BB) codes under circuit-level noise. The deferred greedy decoder achieves 330x latency reduction over belief propagation (BP) at p = 10^{-3} while maintaining identical logical error rate. Our main theoretical contribution is a closed-form collision resolution factor A_0 = |true collisions| / |birthday collisions|, derived from XOR syndrome analysis with no free parameters, that quantifies the fraction of detector-sharing fault pairs genuinely blocking iterative peeling. For the [[144,12,12]] Gross code, A_0 = 0.8685 (within 0.5% of the empirical value), with shared-2 pairs (4-cycles) always resolving under peeling. We show A_0 depends on the mean fault-graph degree d-bar rather than code size: A_0 = 0.87 for d-bar = 52 (Gross family) versus A_0 = 0.76 for d-bar = 17 ([[32,8,6]]). We establish a syndrome code stopping distance d_S = n/4.5 for the Gross family and demonstrate that [[32,8,6]] (d_S = 4) enables two-shot streaming decoding: T = 2 rounds achieve 89% peeling success with 1.29 +/- 0.03 LER ratio versus T = 12, at estimated latency ~50 ns. The full formula P_peel = exp(-A_0 * gamma_analytic * exp(-BTp) * n * p^2) is validated across five BB codes, four noise levels, and four values of T with R^2 = 0.86. Cross-platform reproduction of the Kunlun [[18,4,4]] experiment matches their hardware LER within 0.73 percentage points.
Read the full abstract

Solar and Stellar Astrophysics

Ultra-fast simulations of the solar dipole and open flux

Context. Solar dipole captures important information about the large-scale solar magnetic field. The evolution of the solar magnetic field including the solar dipole can be simulated with a surface flux transport (SFT) model, but these simulations are more extensive than is necessary to produce the evolution of the dipole alone. Aims. We present a dipole flux transport (DFT), matrix method that combines the classic SFT model with dipole vector representation of the solar magnetic field, allowing significantly faster simulations of the solar dipole. Methods. By simulating the evolution of basis vectors of a synoptic map, we constructed propagator matrices that produce the time evolution of the solar magnetic field by means of matrix multiplication. The computational speedup is achieved by compressing the propagator matrices to very small fraction $(< 10^{-4}$) of their original size with a recent vector sum method. Results. Depending on time resolution, the DFT performs 100-1000 times faster than a 4-year SFT simulation of a single active region while producing equivalent results. For multiple source regions, daily propagation matrices are sufficient to produce results that agree within 1% with the SFT simulation of solar cycle 24, while performing 80 times faster. If the evolution of individual active regions is needed, the DFT performs 50000 times faster than the SFT model. Conclusions. DFT makes solar dipole simulations extremely fast, making it possible to run thousands of simulations in a few minutes with a basic laptop setup. As the magnitude of the dipole vector closely matches with open solar flux (OSF) from the potential field source surface model, the DFT can be used to study the development of OSF in various scenarios extremely efficiently.
Read the full abstract

Quantum Physics

Optimal Two-Qubit Gates for Group-IV Color-Centers in Diamond

Color centers associated with group-IV dopants in diamond with long-lived nuclear spins have emerged as major candidates for distributed quantum computing nodes and quantum repeaters. Several proof-of-principle experiments have already been demonstrated. A key operation for long-distance entanglement-distribution protocols are fast and robust gates between the electron spin and a nuclear spin. Here, we investigate numerically for an existing experimental platform of a Germanium-vacancy (GeV) center with a strongly-coupled ${}^{13}$C spin, how such gates can be implemented via quantum optimal control. In the presence of realistic noise we investigate different parameter regimes and gate operations and obtain robust two-qubit gates with fidelities exceeding $99.9 \%$. The framework provides a scalable strategy for group-IV quantum nodes and can be adapted to related architectures.
Read the full abstract

All authors Jurek Frey, Katharina Senkalla, Philipp J. Vetter, Fedor Jelezko, Frank K. Wilhelm, Matthias M. Müller

Physics and Society

Collaboration, Integration, and Thematic Exploration in European Framework Programmes: A Longitudinal Network Analysis

Since their inception in 1984, the European Framework Programmes (FPs) have funded collaborative R&D to promote excellence, cohesion, and competitiveness in a growing European Union. However, their integrative impact and the evolution of the research landscape alongside its collaborative structures remain insufficiently understood. In this longitudinal study, we leverage CORDIS data from all nine FPs to reconstruct the evolution of country-level collaboration networks over time. We observe an increasing equity in project participation between FP1 and FP6, although newly included countries systematically tend to be marginal when first joining the programmes. However, we find that the collaborative nature of EU projects progressively integrates marginal countries in the network, even if this integration is still in progress. We also trace the evolution in time of research topics using semantic embeddings of project descriptions, identifying 117 topics grouped into 16 macro-topics. By computing the minimum spanning tree length of project embeddings within yearly time windows, we quantify how European research progressively explores a wider knowledge space. A comparison with a null model with points randomly distributed in the semantic space indicates that this exploration is more focused than a uniform coverage. Moreover, it appears uneven, with few topics mostly attracting industry and others academia. Our findings suggest that, while European funding promotes international cooperation, it has not yet fully resolved core-periphery asymmetries, and European research remains concentrated along established trajectories rather than broadly exploratory, with implications for future programme design and the excellence-cohesion debate.
Read the full abstract

All authors Veronica Orsanigo, Thomas Louf, Eleonora Andreotti, Elisa Leonardelli, Pierluigi Sacco, Riccardo Gallotti