Disordered Systems and Neural Networks
Papers
Fresh from arXiv, typeset properly. Highlighted words trade on the market.
Monday 30 March
The bulk-edge correspondence principle, a cornerstone of topological physics, ensures that first-order topological systems host robust chiral edge states in two dimension. This was later extended to higher-order phases, where second-order topological insulators exhibit localized, topologically protected corner states. While the transition between these distinct phases has been demonstrated in periodic systems, its existence in disordered platforms remains an open question. Here, we demonstrate a controllable topological phase transition between a second-order topological phase and a first-order topological phase in a two-dimensional photonic alloy. By tuning the magnetic doping concentration - implemented by attaching permanent magnets randomly to nonmagnetized yttrium iron garnet rods in an alternately magnetized honeycomb lattice with C3 rotational symmetry - we flexibly control the system's topology. At zero doping, we observe higher-order corner states, confirmed by a trivial Chern number and non-zero bulk polarizations of 1/3. As doping concentration increases, these corner states progressively merge with the bulk states, culminating in the closure of the bulk transmission gap. After the bulk transmission gap reopens with further increased doping, the system transitions to a first-order topological phase, characterized by a nontrivial Chern number of -1 and the emergence of a chiral edge state. This transition is reversible, providing a highly tunable and experimentally simple platform for flexibly switching between localized corner states and delocalized chiral edge states within a single photonic system.
Soft Condensed Matter
Developments in Multi-Chain Coarse-Grained Models for Entangled Polymer Dynamics
This review describes the development and applications of multi-chain coarse-grained simulations for entangled polymer dynamics. The mean-field tube model has long served as the standard paradigm for describing the many-body entanglement problem as the motion of a single chain in a static field; it faces intrinsic limitations when addressing spatial correlations, fluctuations, and complex topological rearrangements. To overcome these limitations, "multi-chain" approaches – specifically the primitive chain network and multi-chain slip-spring models – were developed. These simulations explicitly resolve the force balance and topological coupling between multiple chains in three-dimensional space. This review covers the primitive chain network model, which emphasizes real-space force balance, and the multi-chain slip-spring model, which is derived from a well-defined free-energy functional. Linear and nonlinear rheology predictions are discussed, along with molecular mechanisms such as constraint release and stretch/orientation-induced reductions in friction. Extensions to branched polymers, wall-slip phenomena, and network polymers are also mentioned.
Read the full abstract
Materials Science
Raman and Terahertz Spectroscopy of Low-Frequency Chiral Phonons in Amino Acids
Chiral phonons are mirror-symmetric vibrations that correspond to twisting and rotational motions of atoms. In chiral biomolecules, they correspond to low-energy terahertz (THz)-range vibrations of the molecular segments involving dozens of atoms whose energies are sensitive to the chirality of the molecules and local atomic geometries. Here we present spectral signatures of chiral phonons in circularly polarized low-frequency Raman and Raman optical activity (ROA) spectra from crystals of several amino acids in different enantiomeric forms. Along with complementary THz circular dichroism (TCD) measurements, our ROA data reveal two sets of bisignate peaks in valine, alanine, tyrosine and proline between 1 and 4.5 THz that are more intense than the ROA peaks in the fingerprint region. Density functional theory (DFT) calculations on L-alanine attribute these modes to twisting and shearing molecular motions. The strong agreement between the ROA and TCD data demonstrates the power of these complementary vibrational spectroscopy techniques to identify chiral phonons in biomolecules, and offers new insights into their vibrational properties and interactions with circularly polarized light.
Read the full abstract
Quantum Physics
Contextuality of quantum non-demolition measurement via state discrimination
Quantum non-demolition measurements facilitate various quantum technologies, including quantum communication. Notably, their operational structure can be replicated by a classical model–referred to as a noncontextual model–making it crucial to identify which features prevents such models from reproducing the corresponding quantum measurements. In this work, we theoretically demonstrate contextual features inherent in the structure of quantum non-demolition measurements. These features not only reveal the nonclassicality of unambiguous state discrimination, but also extend to sequential unambiguous discrimination and probabilistic quantum cloning, both of which involve post-measurement states. Moreover, our analysis extends to noisy scenarios, highlighting its potential relevance for practical implementations. We believe that our results broaden the scope of observing nonclassicality in quantum systems and ultimately contribute to the advancement of various quantum technologies.
Read the full abstract
Sunday 29 March
General Physics
New symmetry in higher curvature spacetimes
New symmetries have been found in Einstein-Maxwell spacetimes. New symmetries have also been found in imperfect fluid curved spacetimes. We will prove in this paper that we can extend these symmetries to spacetimes with higher curvature terms. Higher curvature theories are in many cases associated to dark energy for instance. We provide further justification for these higher curvature formulations through the existence of a new symmetry.
Read the full abstract
General Physics
Entropy and Holography through Adjunctions: A Bicategorical Perspective on Landauer's Principle
We develop a bicategorical formulation of entropy and Landauer's principle in which deterministic monotone maps between logical and thermodynamic state spaces are embedded into a broader theory of open, many-to-many feasibility interfaces. Entropy-ordered state spaces form the objects of a locally posetal bicategory, Boolean profunctors encode feasible implementations, and refinements define 2-morphisms. Although this bicategory admits genuinely non-representable interfaces, every exact Landauer adjunction lies in its representable sector and is generated by a unique monotone implementation map. Such an adjunction also induces an idempotent boundary monad, together with a dual idempotent bulk comonad. Our main result identifies the Eilenberg-Moore object of the boundary monad with a universal boundary-stable quotient determined by the bulk-mediated round-trip relation. This provides a canonical reconstruction principle: the quotient captures exactly those boundary distinctions that remain observable after implementation in the bulk and subsequent readout. In the representable case, two boundary states are identified precisely when they have the same image under the implementation map. Therefore, the result turns irreversible information loss into an explicit universal object and provides a compositional framework for studying reconstruction, coarse-graining, and bulk-boundary visibility in open thermodynamic systems. Finally, we outline a potential cost-enriched extension in which interfaces carry dissipation costs and composition minimizes accumulated dissipation over admissible intermediate realizations, opening a route from Boolean feasibility to quantitative thermodynamic implementation.
Read the full abstract
Applied Physics
Laser Powder Bed Fusion Melt Pool Dynamics for Different Geometric Variations and Powder Layer Heights: High-Fidelity Multiphysics Modeling vs 2025 NIST Experiments
Metal Laser Powder Bed Fusion (PBF-LB/M) is a leading additive manufacturing technique in which part quality and grain morphology are highly dependent on process parameters. Numerous studies of process variations, such as laser power, scan speed, and spot diameter, have demonstrated that they strongly influence melt pool dynamics; however, the effects of powder layer height and geometric variations remain less well understood. In this article, we focus on variations in powder layer height and part geometry to study their influence on melt pool dynamics. We employed a high-fidelity multiphysics simulation framework based on the open source finite volume method (FVM) solver package `LaserBeamFoam' built on `OpenFOAM' to study the variations in different melt pool metrics – melt pool depth, width, bead height, overlap depth, overlap width, solidified area, and dilution area. The solver captures coupled phenomena of heat transfer, fluid flow, vaporization, recoil pressure, Marangoni convection, and realistic laser reflection behavior to accurately model the melt pool dynamics. Simulations are performed for different powder layer heights and geometric dimensions for direct comparison with benchmark experiments conducted at the National Institute of Standards and Technology (NIST) in 2025. Quantitative validation against NIST experiment demonstrates excellent agreement in all the melt pool metrics. These results highlight the predictive capability of physics-based PBF-LB models, paving the way for process optimization, defect mitigation, and the integration of simulation into digital twin frameworks for additive manufacturing.
Read the full abstract
Atmospheric and Oceanic Physics
AIFS-COMPO: A Global Data-Driven Atmospheric Composition Forecasting System
We introduce AIFS-COMPO, a skilful medium-range data-driven global forecasting system for aerosols and reactive gases. Building on the ECMWF Artificial Intelligence Forecast System (AIFS), AIFS-COMPO employs a transformer-based encoder-processor-decoder architecture to jointly model meteorological and atmospheric composition variables. The model is trained on Copernicus Atmosphere Monitoring Service (CAMS) reanalysis, analysis, and forecast data to learn the coupled dynamics of weather, emissions, transport, and atmospheric chemistry. We evaluate AIFS-COMPO against a range of atmospheric composition observations and compare its performance with the operational CAMS global forecasting system IFS-COMPO. The results show that AIFS-COMPO achieves comparable or improved forecast skill for several key species while requiring only a fraction of the computational resources. Furthermore, the efficiency of the approach enables forecasts beyond the current operational horizon, demonstrating the potential of AI-based systems for fast and accurate global atmospheric composition prediction.
Read the full abstract
High Energy Physics (Phenomenology)
Cherenkov plasmons emission by primordial neutrinos
We study the emission of Cherenkov plasmons by the gas of neutrinos with a nonzero temperature and a chemical potential. The background plasma, consisting of charged leptons, is taken to be nonrelativistic. The energy emission rate is obtained for longitudinal plasmons. To get the neutrino emissivity we average quantum field theory matrix element over the distribution functions of incoming and outgoing particles. Our results are applied for the description of the cooling down of a neutrino cluster formed in the early universe. Such clusters can exist owing to the neutrino interaction with a hypothetical light scalar boson. Using particular cluster parameters, we demonstrate that the considered cooling mechanism is efficient for some clusters. We find the temperature range where the proposed cooling channel is valid. Some useful calculations of the polarization tensor, as well as the plasmon form factors and their dispersion relations are also provided.
Read the full abstract
Instrumentation and Methods for Astrophysics
The Impact of Computing Data Centres Orbiting Earth
Artificial intelligence is projected to increase U.S. data centre power demand beyond 100 gigawatt by 2035 and global demand toward 1 terrawatt. In response, companies and governments have proposed placing computing infrastructure in sun-synchronous low-Earth orbit, where continuous sunlight could supply electrical power. Generating 5 GW would require solar arrays 4 x 4 kilometers in size. Although technically feasible, such structures at roughly 500 km altitude would dramatically alter both the night and daytime sky. A 4 x 4 km array in low earth orbit would span about 0.4 degrees, comparable to the Moon, and reflected sunlight would make it shine at magnitude g = -5 to -7 mag, 100 times brighter than the brightest stars. Dozens of these structures would appear as a north-to-south chain of industrial objects across the sky, visible for about 1 1/2 hours after sunset and 1 1/2 hours before sunrise. They would block stars, planets, and deep-sky objects for minutes at a time, while increasing the likelihood of collisions that could trigger runaway debris production. These orbiting computing facilities therefore pose serious astronomical, technical, and cultural concerns.
Read the full abstract
Quantum Physics
Quantum Coherence and Giant Enhancement of Positron Channeling Radiation
We present a quantum-mechanical treatment of positron channeling radiation in a planar harmonic potential that explicitly accounts for interference between transition amplitudes from different transverse energy levels. Because the planar channel potential for positrons in diamond~(110) is well approximated by a parabola, the transverse spectrum is equidistant, $\varepsilon_n = \Omega(n+\tfrac{1}{2})$, and all $n \to n{-}j$ transitions radiate at the same Doppler-shifted frequency. The sudden-approximation entry of the positron into the crystal produces a Glauber coherent state~\cite{Glauber1963} with Poisson-distributed level populations $|c_n|^2 = e^{-n_0}n_0^n/n!$ and mean occupation $n_0 \propto \theta_{\rm in}^2$. Phase synchronization between the $c_n$ and the dipole matrix elements ensures constructive interference of all contributing amplitudes. Three exact scaling laws follow: (i)~$I_{\rm incoh}\propto n_0\propto\theta_{\rm in}^2$; (ii)~$I_{\rm coh}\propto n_0^2\propto\theta_{\rm in}^4$; (iii)~$\mathcal{G}\equiv I_{\rm coh}/I_{\rm incoh}\approx n_0 \propto\theta_{\rm in}^2$. Numerically, $\mathcal{G} = 12\text{--}31$ for positron energies of $4\text{--}14$~GeV in diamond~(110) at $\theta_{\rm in}=31\;\mu$rad, in agreement with the experimental first-harmonic peak positions of Avakyan et al.~\cite{Avakyan1982} to within 15%. The transition from $N$- to $N^2$-scaling of radiated intensity, driven by quantum coherence, opens a route toward high-intensity monochromatic gamma-ray sources.
Read the full abstract
High Energy Physics (Phenomenology)
Rotation of the polarization plane in axion fields: application to neutron star polar cap regions
We study observable manifestations of an axion field, focusing on possible polarizational effects for electromagnetic wave propagating in such a special magnetoelectric medium. The corresponding analysis is based on a geometric model of the Casimir type, in the framework of which the rotation angle of the polarization plane is derived to the lowest order. The results obtained are discussed for astrophysical conditions of a neutron star, where an existence of a locally inhomogeneous axion region is predicted in the polar cap.
Read the full abstract
Quantum Physics
HAMMR-L: Noise Reduction in Quantum Outcomes Using a Richardson-Lucy Deconvolution Algorithm for Quantum State Graphs
Current quantum computers present significant noise, especially as circuit depth and qubit count increase. Prior work has demonstrated that erroneous outcomes exhibit some behavior in Hamming space, enabling improvements in the output distributions of NISQ-era computers. We present HAMMR-L: a principled post-processing technique for improving the fidelity of output distributions by applying Richardson-Lucy image deconvolution on a state graph of measurement results connected by Hamming distance. We show that this preliminary implementation of HAMMR-L outperforms existing cutting-edge Hamming-based post-processors such as QBEEP while being circuit and hardware agnostic, which QBEEP is not. HAMMR-L also demonstrates clear potential for future improvements and we discuss how such improvements might be realized while highlighting the strengths, limitations, and generality of the underlying concept.
Read the full abstract
Classical Physics
A Schrödinger-like equation for the Thermodynamics of a particle in a box
The particle in an expanding/contracting 1-dimension box is revisited in action-angle like variables with direct thermodynamic interpretation. An angle dependent potential is proposed accurately describing the mechanical behavior while also capturing thermodynamic evolution – entropy production – within a canonical Hamiltonian framework. Heat transfer at constant volume is analyzed, and the derived thermal conductance matches the universal quantum of heat conductance $G_{Q}$ in the quantum limit. Having a Hamiltonian scheme interpretable in thermodynamic terms, a Schrödinger-like wave equation is formulated whose wavefunction solutions contain the information about the entropy evolution. The results show exact agreement with 'classical' results for non abrupt changes. Finally, comparisons with a pure quantum mechanical treatment of the wave function in an expanding box confirm consistency in quasi-static regimes and reveal adiabaticity breakdown under far-from-equilibrium conditions.
Read the full abstract
Quantum Physics
High PDMR contrast in single NV centres and related photocurrent properties
This paper aims to extend the understanding of the mechanism of photo-electrical detection of magnetic resonance (PDMR) in nitrogen-vacancy (NV) centres. This technique is particularly important for development of solid-state quantum computing platforms. In particular, we report on the new insight in the photocurrent (PC) generation and charge cycling in the single NV centre, which is related to PDMR contrast reaching 50% and above. We develop a technique to locate PC related features. We find that electrons generated at the NV centre are stored in interface trap levels and establish that the interface states serve as an amplifier that can be driven by introducing a second laser into our confocal setup. We show that controlling these interface states allows one to significantly enhance the PDMR contrast. We develop a model that consistently explains observed amplification effects even without the application of a bias voltage.
Read the full abstract
Materials Science
Localization-driven exchange contrast in diffusion exchange spectroscopy
Diffusion exchange spectroscopy (DEXSY) is a method to probe exchange between domains of varying confinement. Analyses of DEXSY signals typically assume Gaussian diffusion within distinct compartments and first-order exchange kinetics between them. Other situations can yield DEXSY signal contrast with respect to mixing time, however, leading to potentially erroneous interpretation. Here, we demonstrate that a one-dimensional compartment with reflecting boundaries and without relaxation can by itself produce such contrast in certain experimental regimes. The origin of this contrast is the diffusive mixing of spin isochromats initially near versus far from either boundary, as the former can be relatively coherent in an effect known as edge enhancement or signal localization. We consider DEXSY signals in the case of extended field gradients and identical encodings. Signals were generated via a numerical approach that solves the Bloch-Torrey equation in discrete space and time using matrix operators. We find that in the localization regime, an apparent first-order rate constant of exchange, $k$, can be extracted from DEXSY signals even in this minimal system. The measured $k$ is approximately proportional to $D/L^2$, where $D$ is the diffusivity and $L$ is the domain size. Typically, $k \approx \pi^2 D/L^2$. We attribute this localization-driven exchange to the relaxation of spatial magnetization modes with mixing time, noting that $\pi^2 D/L^2$ is the first non-zero eigenvalue of the Laplacian basis. These results demonstrate that DEXSY and related methods such as filter exchange spectroscopy (FEXSY) may not be specific to genuine barrier permeation.
Read the full abstract
Mathematical Physics · Cross-listed from math.PR
Marked GUE-corners process in doubly periodic dimer models
We study a family of periodically weighted Aztec diamond dimer models near their turning points. We establish that, asymptotically, as $N\rightarrow\infty$, their fluctuations there, scaled by $\sqrt{N}$, are described by a marked GUE-corners process. This limiting point process is constructed by assigning a Bernoulli mark independently to each particle in a realization of the GUE-corners process. The Bernoulli parameters associated with the random marks reflect the periodicity of the model in the limit. To prove this result we use a double-contour integral representation of the inverse Kasteleyn matrix on a higher-genus Riemann surface, which is well-suited for asymptotic analysis.
Read the full abstract
Mathematical Physics · Cross-listed from stat.ML
Persistence diagrams of random matrices via Morse theory: universality and a new spectral diagnostic
We prove that the persistence diagram of the sublevel set filtration of the quadratic form f(x) = x^T M x restricted to the unit sphere S^{n-1} is analytically determined by the eigenvalues of the symmetric matrix M. By Morse theory, the diagram has exactly n-1 finite bars, with the k-th bar living in homological dimension k-1 and having length equal to the k-th eigenvalue spacing s_k = \lambda_{k+1} - \lambda_k. This identification transfers random matrix theory (RMT) universality to persistence diagram universality: for matrices drawn from the Gaussian Orthogonal Ensemble (GOE), we derive the closed-form persistence entropy PE = log(8n/\pi) - 1, and verify numerically that the coefficient of variation of persistence statistics decays as n^{-0.6}. Different random matrix ensembles (GOE, GUE, Wishart) produce distinct universal persistence diagrams, providing topological fingerprints of RMT universality classes. As a practical consequence, we show that persistence entropy outperforms the standard level spacing ratio \langle r \rangle for discriminating GOE from GUE matrices (AUC 0.978 vs. 0.952 at n = 100, non-overlapping bootstrap 95% CIs), and detects global spectral perturbations in the Rosenzweig-Porter model to which \langle r \rangle is blind. These results establish persistence entropy as a new spectral diagnostic that captures complementary information to existing RMT tools.
Read the full abstract
High Energy Astrophysical Phenomena
Similar ratios of rise timescale to decline timescale of optical light curves in common tidal disruption events
Totally similar physical process in tidal disruption events (TDEs) basically indicates that there should be potential parameter to distinguish variability properties of TDEs from the other transient events having different physical processes. Here, we try to report such a parameter, the timescale ratio $R_{2/1,rd}$ of rise timescale $t_{1/2,r}$ (from half-max to maximum) to decline timescale $t_{1/2,d}$ (from maximum to half-max), especially based on the 34 optical TDEs with reported $t_{1/2,r}$ and $t_{1/2,d}$. Among the 34 optical TDEs, AT2020wey is an outlier with $R_{2/1,rd}\sim2.7$ which is 4.5 times larger than the mean value 0.6 of the other optical TDEs. However, after considering similar but more flexible model functions, the re-determined $R_{2/1,rd}$ is $\sim$0.9 in AT2020wey, totally similar as the values of the other optical TDEs. Therefore, the parameter $R_{1/2,rd}\sim0.6$ could be a potential classification parameter for optical TDEs. Furthermore, $R_{1/2,rd}$ have been checked in the unique optical transients of AT2019avd, PS1-10adi, SDSS J0946+3512 and J2334+1457. We can find that the second flare with $R_{1/2,rd}\sim11$ in AT2019avd should be very different from the other optical TDEs, but PS1-10adi, SDSS J0946+3512, J2334+1457 and the first flare in AT2019avd should be similar as the other optical TDEs. In the near future, properties of $R_{1/2,rd}$ through large sample of optical transients could provide further clues to support whether $R_{1/2,rd}$ could be a better classification parameter to distinguish TDEs and the other transient events.
Read the full abstract
Quantum Physics
Quantum Robust Control using Geometric Optimal Control Theory
In this paper, we demonstrate an approach to quantum robust control based on the tools of geometric optimal control. The central objects of interest are the sensitivity functions defined as the coefficients in the Taylor expansion of the trajectory with respect to the (unknown, small) parameters which describe the deviation of the actual model from nominal one. In terms of these quantities, we formalize an optimal control problem where one searches for the optimal nominal trajectory which minimizes the size of the sensitivity while taking into account other aspects of the control design such as the energy of the control field. We consider in detail the case of a single qubit with a dephasing Hamiltonian term, and the optimal control problem of obtaining a state transfer by minimizing the weighted sum of the energy of the controlling field and the first order sensitivity. At the limit of a very large weight on the sensitivity, we obtain the optimal control which zeros the sensitivity and minimizes the control field energy. This problem has a rich mathematical structure which enables its solution in terms of elliptic integrals. For this problem, we obtain an explicit solution which is particularly simple and also smooth, avoiding discontinuities which are present in other approaches. We extend the results to the robust control of two quantum bits minimizing cross-talk contamination, as we show that such a problem decouples in two independent one qubit problems.
Read the full abstract
Materials Science
Coexistence of ferromagnetism and ferroelectricity in the van der Waals multiferroic CuIn0.2V0.8P2S6
Two-dimensional (2D) van der Waals (vdW) multiferroics have emerged as a promising platform for next-generation multifunctional devices. Although recent studies have demonstrated that artificial heterostructures can combine dual ferroic orders and exhibit strong magnetoelectric coupling, their performance is sometimes limited by poor interface quality and inadequate long-term stability. By contrast, the realization of intrinsic single-phase materials with coexisting ferromagnetism and ferroelectricity remains a longstanding challenge in the field. Here we report the realization of a single-phase 2D vdW multiferroic system, CuIn0.2V0.8P2S6, which exhibits both ferromagnetism and room-temperature ferroelectricity. The intrinsic ferroelectric nature of CuIn0.2V0.8P2S6 was probed using ferroelectric tunnel junctions, which exhibit a large tunneling electroresistance with an ON/OFF ratio of 107 at 295 K. CuIn0.2V0.8P2S6 develops ferromagnetic ordering with the Curie temperature (TC) of 14.6 K, as evidenced by pronounced magnetic hysteresis and a relatively large remanent magnetization. Notably, the appearance of a magnetodielectric response below TC is consistent with the anticipated interplay between the ferromagnetic and ferroelectric orders. These results highlight a promising route toward single-phase van der Waals multiferroics with coexisting ferroic orders.
Read the full abstract
Statistical Mechanics
Long-wavelength amplification of an NLS conserved-charge violation in a one-dimensional Gross-Pitaevskii-Poisson field
Can weak self-gravity be treated as a small, generic perturbation of the integrable one-dimensional cubic nonlinear Schrödinger equation? We test this question by following the first nontrivial local NLS charge, $Q_3$. In the Gross-Pitaevskii-Poisson model it obeys the exact identity $\dot Q_3=\kappa F_3$, where $F_3$ is the instantaneous gravitational force on the charge. We quantify the initial violation through the normalized mean-square displacement of $Q_3$. Its curvature coefficient, $A_3={\rm Var}(F_3)/{\rm Var}(Q_3)$, measures the root-mean-square initial speed of the charge in units of the charge's own ensemble width. For a UV-regulated, linearly stable Gaussian initial-data preparation, Wick contraction gives ${\rm Var}(Q_3)=O(L)$ and ${\rm Var}(F_3)=O(L^2)$, hence $A_3=O(L)$. Direct Monte Carlo evaluation of the full nonlinear observables confirms these powers for $16\leq L\leq 512$. The linear growth of $A_3$ means that admitting longer wavelengths makes nominally weak gravity increasingly effective at displacing the NLS charge. Along the Jeans-stable sequence $\kappa_L\propto L^{-2}$, the associated short-time curvature scale is $L^{3/2}$ instead of the $L^2$ benchmark of an infrared-uniform perturbation. This is an equal-time result, not a relaxation-rate or KPZ measurement. The local sound sector contains the Burgers self-coupling required for KPZ, but unscreened gravity also generates a relevant inverse-gradient coupling and, at fixed strength, a Jeans band. A dynamical connection to KPZ therefore requires a projected charge-relaxation calculation and a branch-resolved structure-factor test.
Read the full abstract
Materials Science
AI-ready design of realistic 2D materials and interfaces with Mat3ra-2D
Artificial intelligence (AI) and machine learning (ML) models in materials science are predominantly trained on ideal bulk crystals, limiting their transferability to real-world applications where surfaces, interfaces, and defects dominate. We present Mat3ra-2D, an open-source framework for the rapid design of realistic two-dimensional materials and related structures, including slabs and heterogeneous interfaces, with support for disorder and defect-driven complexity. The approach combines: (1) well-defined standards for storing and exchanging materials data with a modular implementation of core concepts and (2) transformation workflows expressed as configuration-builder pipelines that preserve provenance and metadata. We implement typical structure generation tasks, such as constructing orientation-specific slabs or strain-matching interfaces, in reusable Jupyter notebooks that serve as both interactive documentation and templates for reproducible runs. To lower the barrier to adoption, we design the examples to run in any web browser and demonstrate how to incorporate these developments into a web application. Mat3ra-2D enables systematic creation and organization of realistic 2D- and interface-aware datasets for AI/ML-ready applications.
Read the full abstract
Lattice Field Theory
Extracting $B_s\to D_s^*\ell\nu_\ell$ form factors
Semileptonic $B_{(s)}$ decays are of great phenomenological interest because they allow to determine e.g. CKM matrix elements or test lepton flavor universality. Taking advantage of already existing lattice data, we demonstrate the analysis steps to extract the four form factors describing exclusive semileptonic $B_s\to D_s^*\ell\nu_\ell$ decays using the narrow width approximation. Our data are based on RBC/UKQCD's set of 2+1 flavor gauge field ensembles with Shamir domain-wall fermion and Iwasaki gauge field action featuring inverse lattice spacings of $a^{-1}=$1.785, 2.383, and 2.785 GeV as well as pion masses between 268 and 433 MeV. Light, strange and charm quarks are simulated using domain-wall fermions, whereas bottom quarks are generated with the relativistic heavy quark (RHQ) action.
Read the full abstract
Materials Science
On a relationship between grain boundary free energy, grain boundary segregation, and grain boundary diffusion
We present a detailed analysis of the universal relationship between grain boundary (GB) free energy and GB self-diffusion coefficient derived by Borisov et al. (1964). This relationship was expressed by a simple equation that was used in many publications to predict GB energies on the basis of experimental diffusion data. Meanwhile, the physical assumptions and approximations underlying the Borisov model are poorly understood. As a result, the Borisov equation was often used outside its intended limits. Here, we re-derive the Borisov equation from ground up, identifying its underlying assumptions, correcting some errors and inconsistencies, and extending the original model to the case of impurity diffusion and diffusion by the interstitialcy and interstitial-dumbbell mechanisms. The meaning of the key assumption of the Borisov model, related to the free energy of the activated complex, is discussed, and ways to test this assumption are proposed.
Read the full abstract
Materials Science
Shining light on short-range atomic ordering in semiconductors alloys
The functional properties of semiconductors are typically controlled by tailoring their chemical composition and their state of strain, and by controlling their long-range structural order, including the presence of extended defects such as dislocations. In addition to these approaches, theoretical predictions suggest that short-range order (SRO) of atoms in group-IV semiconductor alloys can modify the bandgap, a defining property of any semiconductor. Herein, a new machine learning enabled, computation-guided methodology for extended X-ray absorption fine structure (EXAFS) analysis of SRO is used to quantify the effects of local atomic order on the bandgap of germanium-tin (GeSn) alloy single crystal nanostructures with well-controlled strain and composition. Correlative analysis of EXAFS and photoluminescence (PL) establishes the relationship between bandgap and the Warren-Cowley short-range order (WC-SRO) parameter of the GeSn alloys. It is further demonstrated that SRO can be tuned over a broad range by post-deposition annealing of the alloy crystals. This work establishes control of SRO as an important design parameter for semiconducting properties and suggests the potential for quantitative measurement and tuning of SRO in other semiconductor alloy systems.
Read the full abstract
Chemical Physics
Enhancing Spin Coherence of Optically-Addressed Molecular Qubit by Nuclear Spin Hyperpolarization
Optically addressable molecular triplet spins provide a chemically tunable platform for quantum application, but their coherence is often limited by interactions with surrounding spin baths. Here we demonstrate controlled suppression of nuclear-bath-induced decoherence in photoexcited triplet spins of pentacene co-crystallized in high-purity naphthalene single crystals. By hyperpolarizing the proton spin bath through triplet dynamic nuclear polarization (triplet-DNP), magnetic noise generated by the nuclear spins is suppressed, leading to an extension of the electron spin transverse coherence time. Experimentally, we observe a 25% enhancement of the spin-echo decay time with $60\%$ polarization of the proton spin bath. The measured scaling of the spin-echo decay time ($T_2$) with nuclear polarization quantitatively follows the predicted dependence derived from the polarization-controlled nuclear second moment. Both the enhancement and the absolute value of the coherence time are quantitatively reproduced by cluster correlation expansion (CCE) simulations. These results establish nuclear spin hyperpolarization as a general and actively tunable approach to engineering coherence in molecular qubits. This work provides a broadly applicable design framework for high-coherence molecular and solid-state spin systems.
Read the full abstract
Geophysics
Relative Focal Mechanism Inversion Using Relative Polarities and S/P Double Ratios
Focal mechanisms of small earthquakes are critical for characterizing faults and regional stress. P-wave polarities and S/P amplitude ratios (e.g., in HASH) are widely used to determine focal mechanisms for small earthquakes, but first-motion picking can be difficult for emergent onsets, and S/P ratios are often highly inconsistent because of imperfect velocity models and unknown site responses. Here, I present FocMecDR, a relative focal-mechanism inversion method that uses relative polarities and double ratios of S/P amplitudes. Analogous to double-difference earthquake location, FocMecDR uses a reference event with a known focal mechanism to solve focal mechanisms for nearby earthquakes by minimizing the misfit between observed and theoretical S/P amplitude double ratios while enforcing cross-correlation-based relative polarities. Extensive synthetic tests demonstrate the effectiveness and accuracy of the method. Field verification using an antisimilar earthquake pair and aftershocks from the northwestern end of the 2019 Ridgecrest rupture zone further confirms its reliability. Application to the foreshocks preceding the 2019 Ridgecrest mainshock reveals a highly uniform stress field during nucleation, suggesting a possible framework for evaluating fault-zone stress and rupture readiness before large earthquakes.
Read the full abstract
Quantum Physics
Exponentially cheaper coherent phase estimation via uncontrolled unitaries
Phase kickback is a fundamental primitive that is used in many quantum algorithms, such as quantum phase estimation. Here we observe that by using information about the controlled unitary, we can replace the controlled unitary with an uncontrolled one at the cost of introducing controlled state preparations. We then show how this modified phase kickback can be used as part of the quantum phase estimation algorithm when the goal is to estimate the phase of an eigenstate whose preparation procedure is known. We prove that this yields an exponential reduction in the number of two-qubit gates for an m-bit phase estimation in the relevant limit. Examples of applications are also presented. Naturally, this can be adapted to any algorithm that uses the phase kickback phenomenon and satisfies the assumptions.
Read the full abstract
Materials Science
The Shape of Chocolate: A Topological Perspective on Food Microstructure
We present a computational framework for characterizing the molecular self-organization of cocoa butter (Theobroma cacao) during dark chocolate tempering through the lens of Topological Data Analysis (TDA). A physics-inspired particle simulation models N=100 triglyceride molecules across the full temperature range 15–60 degrees C, spanning all six crystalline polymorphs of cocoa butter (Forms I–VI) as well as the melt and superheating regimes. At each temperature tick, we construct a Vietoris-Rips filtration and compute the persistent homology groups H0 (connected components), H1 (independent cycles), and H2 (3D voids). The resulting persistence diagrams are analyzed via persistent entropy E = -sum_i p_i log2(p_i), where p_i = l_i / sum_j l_j and l_i = death_i - birth_i denotes feature lifetime; essential classes are assigned death = m+1 (m = eps_max) following the standard persistent entropy convention (Rucco 2026, arXiv:2602.09058). Our results demonstrate that Form V (the optimal tempering polymorph, 29.5–34 degrees C) is characterized by a distinctive topological signature: a local minimum in the H0 persistent entropy (E0 = 5.74 +/- 0.04 bits), a pronounced depression in the first Betti number beta_1 (1562 +/- 35), and a global minimum in the H2 entropy (E2 = 12.29 +/- 0.25 bits) reflecting coherent inter-bilayer lamellar cavities. Via Theorem 1 and Corollary 1 of Rucco (2026), persistent entropy is proven to separate the ordered and disordered phases by an asymptotically non-vanishing gap whenever a phase transition induces the creation or destruction of topological mass at macroscopic scales – a condition we verify empirically across all eight cocoa butter regimes. These findings suggest that TDA-based metrics could serve as non-invasive quality indicators for industrial chocolate tempering processes.