Peer Revenue Publish or profit

Papers

Fresh from arXiv, typeset properly. Highlighted words trade on the market.

Physics Astrophysics Instrumentation and Methods for Astrophysics

astro-ph.IM Watch Instrumentation and Methods for Astrophysics (sign in to use)

Friday 4 September

Instrumentation and Methods for Astrophysics · Cross-listed from astro-ph.CO

A guide to choosing data compression methods for cosmological inference

We provide a pedagogical guide to help researchers choose an appropriate compression method for cosmological inference and numerical covariance estimation, trading off the balance between information loss and complexity. We describe methods used in the literature, categorising them by the form of the loss function – Fisher information, mutual information, or mean squared error – and by whether they are linear or non-linear. We consider in detail the linear compression methods: massively optimised parameter estimation and data compression (MOPED), canonical correlation analysis (CCA), principal component analysis, and linear neural networks. We also investigate simple non-linear methods based on neural networks with similar architectures but different loss functions. We use tomographic weak lensing power spectra as example data vectors, deriving constraints on the cosmological parameters $\Omega_\mathrm{m}$, $\sigma_8$, $w_0$ and $w_a$ from compressed data. For our figure of merit (FoM) we use the log determinant of the Fisher matrix, which approximates the covariance of the full posterior well. MOPED and a Fisher information-based linear neural network both achieve lossless compression. Neural networks with loss functions which optimise mutual information achieve at most 84 per cent of the uncompressed FoM and those which minimise mean squared errors achieve at most 72 per cent. We show how to determine whether MOPED will retain information even if the fiducial cosmology is not known with certainty, and demonstrate a strategy for CCA which results in an FoM close to that of MOPED while requiring only an approximate idea of where the bulk of the posterior mass is located.
Read the full abstract

All authors Susan Pyne, Benjamin Joachimi, Calum Gordon, Kiyam Lin

Instrumentation and Methods for Astrophysics

Validating the SCALES DRP: A Performance Study of the Medium-Resolution IFS Mode

We present a performance verification of the medium-resolution integral field spectrograph (IFS) mode of the SCALES Data Reduction Pipeline (SCALES-DRP) using data obtained during recent cryogenic cooldown testing. SCALES (Slicer Combined with Array of Lenslets for Exoplanet Spectroscopy), scheduled for deployment on the Keck II Telescope in late 2026, will be the first facility-class high-contrast thermal-infrared IFS, operating over the 2-5 micrometer wavelength range. The SCALES-DRP, developed within the Keck Data Reduction Pipeline Framework and implemented in Python, converts raw detector reads into calibrated three-dimensional datacubes using rectification matrices derived from position-dependent monochromatic lenslet point-spread functions, and supports both optimal and chi-sqaure-based spectral extraction to maximize signal-to-noise and extraction fidelity. We present laboratory verification results for the medium-resolution IFS mode, which combines a 0.34x0.36 arcsec lenslet subarray with an image slicer to achieve spectral resolutions of R ~ 2,000 - 5,000, focusing on the performance of the rectification matrices and the robustness of the extraction algorithms. These results demonstrate the readiness of the SCALES-DRP for instrument commissioning and early science operations. The pipeline is publicly available on GitHub.
Read the full abstract

All authors Athira Unni, Steph Sallum, Max Brodheim, Rosalie McGurk, Andy Skemer, Matthew Brown, Peyton Benac, Michael P. Fitzgerald, Deno Stelter, Dusty Reichwein, Aaron Hunter, William T. S. Deich, Isabel Kain, Mackenzie Lach

Instrumentation and Methods for Astrophysics · Cross-listed from astro-ph.EP

Retrieving Ocean Glint Reflectance Signatures from Directly Imaged Earth-like Exoplanets

Future space telescopes searching for extraterrestrial life require methods to detect environments that can potentially support life. Liquid water is considered essential for life as we know it and its presence is therefore an important observable when characterizing potentially Earth-like exoplanets. Remotely inferring the presence of surface liquid water on a world from spatially unresolved observations is an outstanding challenge where the detection of ocean glint could provide supporting evidence. This study assesses the feasibility of detecting ocean glint from Earth-like exoplanets using simulated data from NASA's Habitable World Observatory (HWO). We conducted retrievals on these simulated observations using a model that included a glint contribution and performed model selection against retrievals that did not include glint. We find that over a range of spectral signal-to-noise ratios from 5 to 25, a phase angle of at least 120 deg is necessary for glint detection. Our results offer the opportunity to shape mission development by providing constraints on key telescope observing requirements.
Read the full abstract

Thursday 3 September

Instrumentation and Methods for Astrophysics · Cross-listed from astro-ph.EP

A Cross-Laboratory Comparison Study of Titan Haze Analogs: Surface Energy II

The organic haze particles on Titan play important roles in atmospheric cloud formation and aerosol-lake interactions. These processes are strongly influenced by the surface energy of the haze particles, which controls cohesion and wetting behavior. This study presents a comparative analysis of 32 laboratory-produced haze analog samples ("tholins") synthesized across three laboratories. Using contact angle measurements, we determine the total surface energy and its dispersive and polar components for all samples, systematically evaluating the effects of substrate choice, air exposure, initial N2/CH4 gas mixture, and experimental setup. We find that tholin samples exhibit minimal substrate dependence, whereas exposure to ambient air substantially modifies the surface chemistry, altering the balance between dispersive and polar components. Thus, future Titan-relevant surface property measurements may use any substrate but must keep samples pristine. Surface energies vary weakly across methane concentrations, from 1-10% CH4 in N2, indicating that Titan's hazes formed at different altitudes should exhibit broadly similar cohesiveness. In contrast, experimental conditions such as gas exposure time and energy source produce the dominant differences in surface energy, driven largely by variations in polar components. Despite these differences, tholin samples exhibit high dispersive components, implying that Titan's hazes should act as efficient cloud condensation nuclei for hydrocarbon clouds and should generally sink into Titan's lakes. Given observed ethane ice clouds, we conclude that cold plasma tholins may be better physical analogs for Titan's hazes than samples produced with far-ultraviolet irradiation, though intrinsic surface energies of UV tholins remain uncertain due to film thickness limitations.
Read the full abstract

All authors Eric C. Austin, Xinting Yu, Chao He, Cara Pesciotta, Ella Sciamma-O'Brien, Joshua A. Sebree, Jose Raul Montes-Bojorquez, Adis Husić, Erik White, Christopher R. Bond, Sarah Hörst, Farid Salama, Patricia McGuiggan

Instrumentation and Methods for Astrophysics · Cross-listed from astro-ph.CO

Implementation of frequency-correlated noise in CMB component separation: Method, Validation, and Early Applications

Parametric component separation methods used in cosmic microwave background (CMB) analyses commonly assume instrumental noise to be uncorrelated between frequency channels. This approximation may become insufficient for experiments whose design naturally introduces cross-channel correlations, such as interferometric or multi-band bolometric systems. This work aims to provide a consistent framework to include frequency-correlated noise in Commander2 and to quantify its impact on component separation in controlled and instrument-motivated simulations. We generalized the amplitude sampling of the Commander2 framework to consistently handle dense frequency-frequency noise covariance matrices, modifying the likelihood evaluation and parallel architecture. The implementation is validated on low-resolution simulations of a simplified CMB-S4-like configuration. We applied the generalized framework to instrument-motivated simulations of the QUBIC bolometric interferometer, using representative noise models derived from end-to-end simulations. Validation tests show excellent convergence and agreement between sampled parameters and analytical maximum-likelihood estimates. Accounting for frequency correlations reduces the width of the maximum-likelihood residual distributions by up to 8% on average, and up to 11% for individual parameters, relative to the diagonal-noise approximation. In QUBIC-based simulations, accounting for an anti-correlated noise produces posterior widths reduced by about 60%, while a positive-correlation test increases them by about 40%. This shows that neglecting cross-channel correlations can lead to incorrect posterior estimates in either direction. The generalized implementation presented here enables the Commander2 software to consistently propagate such correlations into parameter estimation, providing a framework for assessing their impact in future CMB analyses.
Read the full abstract

All authors L. Zapelli, M. Bersanelli, L. P. L. Colombo, A. Mennella, L. G. Bachar, E. Battistelli, I. Bekkaoui, L. A. Bianchi, A. Coppolecchia, B. Costanza, P. De Bernardis, G. De Gasperis, S. Ferazzoli, M. Galloway, B. García, M. Gervasi, N. Mirón-Granese, J-Ch. Hamilton, T. Laclavère, J. G. S. Lunde, S. Masi, Y. Moulane, S. Paradiso, I. D. Queirolo, M. Regnier, G. E. Romero, C. G. Scóccola

Instrumentation and Methods for Astrophysics

Identifying Casual SETI Transmissions and Ultra-Faint RFI with Cumulant Imaging

Techniques for identifying radio beacons transmitted by extra-terrestrial civilizations are well advanced. However, the casual broadband emission from standard radio communication is much harder to detect, and counter-intuitively casual Earth radio transmissions are becoming more difficult to identify as we more efficiently utilize the radio spectrum. In this paper we examine the electric-field statistics behind radio communication and re-conceptualize standard radio imaging as the first non-zero cumulant. This leads us to images of the higher cumulants where the natural stochastic emission from astrophysical sources disappears, leaving images of only modulated sources of radio communication. Faint SETI and RFI sources stand out in these cumulant images, enabling identification of faint communication that is undetectable with current techniques.
Read the full abstract

Instrumentation and Methods for Astrophysics

ALPACA I: Controlling source and PSF systematics in JWST time-delay cosmography with differentiable lens modeling

Time-delay cosmography provides an independent probe of the Hubble constant ($H_0$), but exploiting the high-resolution imaging of the James Webb Space Telescope (JWST) requires strong-lens models that capture complex source-galaxy morphologies and the point spread function (PSF) with high fidelity. Flexible source and joint PSF reconstruction are computationally expensive, motivating more rigid parameterizations that can bias the inferred time-delay distance $D_{\Delta t}$. We present ALPACA, a semi-automatic, GPU-accelerated, differentiable strong-lens modeling pipeline built on Herculens, Starred, and JAX. ALPACA jointly reconstructs a pixelated correlated-field source, the lens mass, and the PSF within a single likelihood, reducing per-system runtimes from weeks to less than 15 hours. We validate the pipeline on realistic mock JWST/NIRCam observations built from morphologically complex COSMOS galaxy sources. Holding an imperfect PSF (RMSE = 12% from truth) fixed biases $D_{\Delta t}$ by up to 14%, whereas joint PSF reconstruction reduces this bias to the percent level. We further show that the reconstructed PSF core can be marginalized over jointly with the lens parameters during posterior sampling. Propagating the per-lens posteriors of a ten-lens mock sample through hierarchical inference, we recover the input cosmology without significant bias. ALPACA shows that rigorous control of source and PSF systematics is computationally affordable, supporting reliable percent-level precision in the JWST era.
Read the full abstract

All authors Hrvoje Krizic, Martin Millon, Aymeric Galan, Sydney Erickson, Phil Marshall

Instrumentation and Methods for Astrophysics

Development of quantum technologies for optical/infrared interferometry

Quantum technologies may revolutionize optical interferometry through new means to distribute and preserve electric-field amplitude and phase correlations between widely separated telescopes. After reviewing existing techniques, I survey proposed quantum-sensing and quantum-networking applications and highlight recent laboratory demonstrations of key building blocks. By easing field-transport demands for baselines beyond $\sim$1 km, quantum-enhanced interferometry could enable sub-milliarcsecond imaging and microarcsecond-class differential astrometry. That said, "going quantum" is not a magic shortcut to sensitivity because many of the most compelling science cases remain photon- and turbulence-limited. I therefore emphasize the practical constraints – loss, bandwidth, coherence time, synchronization, and wavelength limits of quantum interfaces – that must also be overcome to make these capabilities useful for astronomy, whether deployed on the ground or from space.
Read the full abstract

Instrumentation and Methods for Astrophysics

TNFlow: Amortized Posterior Inference for Trans-Neptunian Object Surface Composition

We present TNFlow, a transformer and normalizing flow architecture for inferring the surface composition of Trans-Neptunian Objects (TNOs) from their reflectance spectra. TNFlow is trained on synthetic spectra generated by the Shkuratov radiative transfer model to act as its inverse. TNFlow takes ${\sim}$0.7s to invert one spectrum on a single CPU core, returning a multimodal posterior over simplex-valid compositions and grain sizes. On synthetic spectra, the highest-weight mode achieves a mean total-variation distance of 0.149 from ground truth on the test split, and the model generalizes well to unseen combinations of known components. Qualitative tests on real JWST spectra show blindness or bias towards some materials. We suggest this could be attributed to either simulator fidelity or the training set.
Read the full abstract

Instrumentation and Methods for Astrophysics · Cross-listed from astro-ph.GA

Absolute Motion of the Infrared Counterpart to Sagittarius A* in the Gaia Celestial Reference Frame 3 and Limits on an Intermediate-mass Black Hole Companion

We report the first proper motion and acceleration measurements of the infrared (IR) counterpart to Sagittarius A* (Sgr A*-IR), the supermassive black hole (SMBH) at the center of our Galaxy, in the Gaia-Celestial Reference Frame (Gaia-CRF3). This reference frame realizes the International Celestial Reference System (ICRS), which is an absolute reference coordinate system defined by quasars. A combination of Gaia and Hubble Space Telescope data was used to transform Keck adaptive optics (AO) observations into Gaia-CRF3. We developed a method for selecting reference stars that minimizes astrometric transformation errors (statistical error = $0.10-0.63$ mas) and drift of the coordinate system (systematic error $\sim 0.01$ mas/yr). We find the proper motion of Sgr A*-IR in Gaia-CRF3 to be $\mu_{\alpha^{*}} = -3.093 \pm 0.085$ mas yr$^{-1}$ and $\mu_{\delta}= -5.62 \pm 0.13$ mas yr$^{-1}$ with the initial position at $t_{0} = 2016.0$ of R.A. = 266.41680848 $\pm$ 0.00000029 deg and DEC = -29.00783947 $\pm$ 0.00000050 deg, which translates to a precision of 1.05 mas in R.A. and 1.79 mas DEC. This is consistent with the astrometric measurements of the radio counterpart to Sgr A* by \citet{Xu_2022}. We also place a $2\sigma$ upper constraint of the acceleration of Sgr A*-IR on the sky at 0.061 mas yr$^{-2}$. This acceleration limit on Sgr A*-IR excludes any intermediate-mass black hole companion with mass $\gtrsim 4\times 10^{4}$ $M_{\odot}$ within a distance of $\sim$0.01 pc, consistent with previous studies. With the release of Gaia Data Release 4, we predict these limits will be improved by at least a factor of two.
Read the full abstract

All authors Rebecca A. Lewis-Merrill, Tuan Do, Matthew W. Hosek Jr., Gregory David Martinez, Shoko Sakai, Kelly Kosmo O'Neil, Grant Weldon, Abhimat Gautam, Zoë Haggard, Andrea M. Ghez, Jessica R. Lu, Keith Matthews

Instrumentation and Methods for Astrophysics · Cross-listed from astro-ph.EP

Detection of hydrocarbons in Titan using high-resolution cross-correlation spectroscopy

High-resolution cross-correlation spectroscopy (HRCCS) is a powerful technique for detecting molecules whose individual spectral lines are too weak to be identified directly, but its sensitivity is limited by the availability and quality of high-resolution opacity data. Many molecules of atmospheric and astrobiological interest lack complete line lists, restricting traditional template-based searches. In this work, we use Titan as a controlled testbed to develop and validate a new cross-section-based methodology for HRCCS template construction. We analyse K-band CRIRES+ observations of Titan (1.99 - 2.48 {\mu}m), and compute cross-correlation functions using both line-by-line and cross-section-based templates. Our analysis recovers known hydrocarbons such as methane (CH4) and acetylene (C2H2), and yields the first HRCCS detection of ethane (C2H6) with a significance of SNRpeak = 5.17 {\pm} 0.07. The ethane detection was made possible exclusively through cross-section-based templates, as no high-resolution line list currently exists for this molecule. These results demonstrate that cross-section-based template construction is a practical and powerful strategy for extending HRCCS to molecules that currently lack reliable line lists, and establish Titan as a benchmark for calibrating molecular detection techniques that can be applied to both solar system and exoplanet atmospheres. Future applications of this approach to other ground-based high-resolution spectrographs, as well as to JWST's highest-resolution modes and next-generation facilities such as the ELT, could significantly expand the inventory of molecules detectable in planetary atmospheres.
Read the full abstract

All authors Maria Coelho, Rafael Rianço-Silva, Diogo Gonçalves, Pedro Machado, Zita Martins

Instrumentation and Methods for Astrophysics

nufftcf: Fast Auto- and Cross-Correlation Function Estimation for Irregularly-Sampled Time Series via the Non-Uniform FFT

Estimating the auto-correlation function (ACF) and cross-correlation function (CCF) of sampled series is a standard task in many physics fields, including astronomy and environmental sciences. We present nufftcf, an ACF/CCF estimator designed primarily for irregularly sampled series, numerically consistent with established kernel-weighted definitions and scaling as O(nK) for K requested lags, rather than O(n^2). nufftcf was initially developed to evaluate the Wiener-Khinchin theorem for irregularly sampled data using the Non-Uniform Fast Fourier Transform (NUFFT), through the Flatiron Institute FINUFFT library, with Gaussian and rectangle kernels. An O(n)-per-lag two-pointer scan replaces the naive O(n^2) computation of the effective pair count used to normalize each lag bin. This enabled real-space estimators using the same kernels, providing exact reference implementations with the same O(nK) complexity and, in some cases, lower cost than the NUFFT path. The library also provides dedicated classical-FFT estimators for regularly sampled data. All estimators share a common calling convention. Using synthetic time series, we validate nufftcf for ACF against pastas, a library used in groundwater time-series analysis, and for CCF against pyZDCF, used in astronomical time-series analysis. Benchmarks confirm O(nK) scaling for the NUFFT and real-space nufftcf estimators, compared with O(n^2) for the pastas slotting technique. nufftcf is already advantageous at moderate series lengths because of its low millisecond-scale overhead. For regularly sampled data, the FFT path further reduces computational cost. We also demonstrate nufftcf on a simulated ground-based stellar light curve combining quasi-periodic rotation, correlated flicker noise, seasonal sampling gaps, and heteroscedastic measurement errors. Notebooks and scripts are provided to reproduce the examples and explore other use cases.
Read the full abstract

Instrumentation and Methods for Astrophysics

Morphology of Radio Sources in Representation Space

Understanding radio source morphologies and their classification remains challenging. We previously developed a deep clustering method based on self-supervised learning to classify a subsample of radio sources from the LOFAR Two-meter Sky Survey DR2. This yielded a labelled subset used to fine-tune an ensemble of classifiers. We aim to identify rare morphological classes in a subsample of LoTSS-DR3, which contains > 13 million sources, beyond the 12 classes previously recognised in the DR2 sample. We further aim to characterise the resulting class distribution. We applied the classifier ensemble to derive class probabilities and representations for our samples. Among DR3 sources with low class probabilities, we searched for new clusters in representation space. Moreover, we use these clusters as centroids to classify the low-probability subset. We found that 88% of the sources fall into clearly separated clusters in representation space, coinciding with the DR2 clusters. Within the remaining sources, we identified representatives of six additional morphological classes, including rare morphologies like winged and FR-ambiguous sources. The number of sources in the resulting 18 classes exhibit a strongly skewed distribution, with four dominant classes constituting 69% of the DR3 sample, while rare morphologies account for only a small fraction. The identification of additional morphological classes shows the possibility of open-set recognition with representation learning in an unexplored dataset. Unlike anomaly detection, which flags individual sources as uncommon, this approach identifies representatives of novel morphological classes, providing a framework for discovering novel source populations. The highly skewed class distribution poses a fundamental challenge for constructing balanced training datasets and highlights the need for open-set approaches in future observations.
Read the full abstract

Instrumentation and Methods for Astrophysics · Cross-listed from astro-ph.EP

Effect of stellar spot-only spectral lines in high-resolution transit spectroscopy

We investigate how a representative single spectral line present only in a stellar spot can introduce distortions in high-resolution planetary absorption spectra. Specifically, we assess whether such spot-induced features may resemble planetary atmospheric absorption and the observational or stellar conditions under which they become significant. Using the SOAPv4 code, we simulated transit observations of an atmosphere-less planet across a star with a spot containing an additional absorption line compared to the photosphere's spectrum. Two systems were modelled: a close-in Jupiter-sized planet and a distant Earth-sized planet transiting a Sun-sized star. We varied the stellar rotation period and the spot size, and ensured that the planet transits the spot. Spectral lines were idealised Gaussians to isolate the impact of the spot-specific feature. We show that a single stellar spot line can generate spurious features in the absorption spectrum. These features contaminate the absorption spectrum in ways that may lead to misinterpretation if not accounted for. For Jupiter-sized planets with short transits, the features are mainly emission-like, but can nonetheless dampen a potential true atmospheric absorption signature. For Earth-sized planets with long transits, the distortion is mainly absorption-like and could be interpreted as planetary absorption. These results highlight the importance of accounting for stellar heterogeneity and activity in the analysis of high-resolution absorption spectra.
Read the full abstract

All authors W. Dethier, E. Cristo, O. D. S. Demangeon, J. P. Lucero, N. C. Santos, B. Tessore

Instrumentation and Methods for Astrophysics · Cross-listed from astro-ph.HE

Gamma-Ray Bursts and Optical Brightness: Insights from Swift Satellite

During the examination of optical properties of gamma-ray bursts (GRBs) measured during the life of the Neil Gehrels Swift Observatory satellite, significant discoveries were made. While the satellite measures gamma, X-ray, and optical data simultaneously, in many cases, only an upper limit is established in the optical domain. Hence, survival analysis, a.k.a. dependability modelling, was necessary, serving as a tool for studying samples where some cases are bound only by the upper limit, as mentioned earlier. This method is used to analyse datasets that may have upper or lower bounds rather than precise observations, but nevertheless contain relevant information. It was previously established that the duration, gamma fluence, and peak flux all have a substantial effect on the optical brightness distribution, probably due to the energy of the beam from the GRB's central engine. However, after analysing more than 200 data points, we no longer see this association. This disagreement shows that the previously reported impact may not be as significant as previously derived, needing more research to better understand the underlying processes that determine the optical brightness in connection to gamma-ray properties.
Read the full abstract

Instrumentation and Methods for Astrophysics

Reconstruction of Shower-like Events in NEON Using Likelihood and Graph Neural Network Methods

The Neutrino Observatory in the Nanhai (NEON) is a proposed deep-sea neutrino telescope deployed in the South China Sea. Accurate reconstruction of shower-like events is crucial for neutrino energy measurements and multi-messenger astronomy, yet it poses significant challenges due to seawater optical attenuation, irregular detector geometry, and substantial $^{40}\mathrm{K}$ ambient background. In this work, we present the first comprehensive reconstruction framework for shower-like events in NEON, encompassing both a physics-driven maximum likelihood estimation (MLE) method and a data-driven Graph Neural Network (GNN). The traditional MLE framework integrates spatial-isochronic hit selection, vertex reconstruction via time-residual M-estimator minimization, and decoupled directional and energy estimation based on pre-computed photon distribution tables. Physical calibrations, including PMT angular acceptance, hit-level time slewing corrections, and an effective line-source shower extension, are incorporated into the likelihood formulation. In parallel, a two-stage GNN is developed to capture intra-DOM PMT correlations and distance-weighted inter-DOM topological patterns. Simulation studies show that the MLE method achieves an overall median angular resolution of $4.19^\circ$ and an energy resolution of 25%-37% over 1 TeV to 1 PeV with negligible systematic bias. The GNN further improves reconstruction fidelity in the low-to-intermediate energy regime, achieving a median angular resolution of $1.8^\circ$ at 30 TeV and an energy resolution of $\sim$ 20% between 40 and 300 TeV. Based on these reconstruction performances, the effective area and point-source discovery potential of NEON are evaluated. This framework establishes an essential reconstruction benchmark for NEON and provides practical methodologies for future next-generation deep-sea neutrino telescopes.
Read the full abstract

All authors Sujie Lin, Weiqin Huang, Yihan Liu, Chengyu Shao, Lili Yang, Huiming Zhang

Instrumentation and Methods for Astrophysics

Night-sky emission correction techniques for high-resolution spectroscopy: Demonstration with NIRPS

Ground-based spectrographs operating in the near-infrared (NIR) regime are hampered by various absorption and emission features of Earth's atmosphere. While considerable attention has been paid to mitigating telluric absorption, correcting telluric emission features remains non-trivial and can significantly affect the observation of faint targets. We aim to develop and implement automated algorithms for sky background emission correction in the context of high-resolution spectroscopy. These empirical-based algorithms have been officially integrated into both NIRPS data reduction pipelines: NIRPS DRS and APERO DRS. Designed for flexibility, these techniques can be incorporated into the reduction workflow of any high-resolution spectrograph to improve the radial velocity (RV) performance. In our approach, a reference sky spectrum is first created by deep-stacking NIRPS sky calibration frames on a common wavelength grid and calculating the weighted median flux per pixel, separately for both the high-accuracy and high-efficiency instrument modes. This process is repeated for all spectral orders and for both the object and sky-calibration fibres: fibre A and fibre B, respectively. In this reference sky spectrum, the sky emission lines can be identified and used to construct a static library. During the data reduction process, the emission features in the library are individually scaled in terms of flux using two distinct techniques, each specific to the two DRS pipelines. Finally, they are locally subtracted from the science observations to minimise their noise contribution to the final spectrum. We find that the correction algorithms significantly improve the RV measurements obtained using both the cross-correlation function and line-by-line techniques, enabling NIRPS to achieve submetre-per-second precision in the NIR. The techniques have been successfully validated and demonstrated.
Read the full abstract

All authors Avidaan Srivastava, François Bouchy, Xavier Dumusque, Étienne Artigau, René Doyon, Neil J. Cook, Danuta Sosnowska, Flavie Bélanger, David Lafrenière, Frédérique Baron, Lison Malo, Susana C. C. Barros, Björn Benneke, Xavier Bonfils, Marta Bryan, Ryan Cloutier, Nicolas B. Cowan, Elisa Delgado-Mena, Xavier Delfosse, David Ehrenreich, Pedro Figueira, Jonay I. González Hernández, Izan de Castro Leão, Christophe Lovis, Bruno L. Canto Martins, Lucile Mignon, Christoph Mordasini, Francesco Pepe, Rafael Rebolo, Jason Rowe, Nuno C. Santos, Damien Ségransan, Alejandro Suárez Mascareño, Jose Renan De Medeiros, Stéphane Udry, Diana Valencia, Gregg Wade, Romain Allart, Vincent Bourrier, Pedro Branco, Charles Cadieux, Gaspare Lo Curto, Yolanda G. C. Frensch, Jonathan Gagné, Roseane de Lima Gomes, Nicole Gromek, Vigneshwaran Krishnamurthy, Pierrot Lamontagne, Yuri S. Messias, Khaled Al Moulla, Dany Mounzer, Nicola Nari, Léna Parc, Atanas K. Stefanov, Thomas Vandal, Drew Weisserman, Joost P. Wardenier

Instrumentation and Methods for Astrophysics

3.5-meter Segmented-Mirror Robotic Space Telescope Mission White Paper V. Key Scientific Mission: Compact-Object Time-Domain Science

An isolated compact object retains the point-source resolving power of the space-based slitless spectrograph. The baseline wavelength range is 0.2–1.5 $\mu$m. The planning baseline uses $R \simeq 1000$ for broad and faint transient spectra and reserves selectable bands at $R \simeq 5000$ for accretion-disk profiles, velocity structure, and precision line ratios. Broad features can be measured after binning the native $R \simeq 5000$ data to lower resolution. Rapid-response spectroscopy follows gravitational-wave counterparts and kilonovae from hours to days. Repeated spectra of dwarf novae and compact binaries trace accretion state and orbital phase, while uninterrupted imaging of white dwarfs measures pulsation frequencies. The program combines mission-based monitoring with external alerts, including KGMT transient detections. The instrument study must preserve calibrated throughput to 2.70 $\mu$m and evaluate a 3.0 $\mu$m operational band edge, with 2.5 $\mu$m retained as the formal engineering off-ramp. Mid-infrared imaging is not part of the adopted compact-object baseline.
Read the full abstract

All authors Juhan Kim, Yong-Woo Kang, Sang Hyun Lee, Jeong-Yeol Han, Sungwook E. Hong, Bongkon Moon, Donguk Song, Juhyung Kang, Myeong-Gu Park, Sang Chul Kim, Chung-Uk Lee, Sangmo Tony Sohn, Arman Shafieloo, David Parkinson, Hong Soo Park, Dohyeong Kim, Chan Park, Jungjoo Sohn, Young-Beom Jeon, Jong-Hak Woo, Hyung Mok Lee, Hong Bae Ann, Myungkook James Jee, Mansoo Choi, Changbom Park

Instrumentation and Methods for Astrophysics

3.5-meter Segmented-Mirror Robotic Space Telescope Mission White Paper IV. Key Scientific Mission: Solar-System Small Bodies and Planetary Defense

The baseline 0.2–1.5 $\mu$m observatory provides rapid-response astrometry, visible and near-infrared taxonomy, rotation and phase curves, recovery, and long-arc orbit improvement for near-Earth objects and other small bodies. The instrument study also evaluates calibrated throughput to 2.70 $\mu$m with a 3.0 $\mu$m operational band-edge goal. A reduction to 2.5 $\mu$m remains the formal engineering off-ramp if thermal, detector, cooling, mass, power, or cost constraints require it. The 3.5-meter Segmented-Mirror Robotic Space Telescope does not carry a mid-infrared channel. Coordinated ground-based mid-infrared telescopes provide the thermal fluxes required to infer diameter and albedo, while the space mission supplies contemporaneous reflected-light measurements and observing geometry. The program combines recovery, physical characterization, orbit refinement, and covariance-based hazard assessment. Its CODES dynamics system and OGFinder-to-OpenOrb processing path connect measured astrometry to reproducible orbit solutions and close-approach predictions.
Read the full abstract

All authors Juhan Kim, Yong-Woo Kang, Sang Hyun Lee, Jeong-Yeol Han, Sungwook E. Hong, Bongkon Moon, Donguk Song, Juhyung Kang, Myeong-Gu Park, Sang Chul Kim, Chung-Uk Lee, Sangmo Tony Sohn, Arman Shafieloo, David Parkinson, Hong Soo Park, Dohyeong Kim, Chan Park, Jungjoo Sohn, Young-Beom Jeon, Jong-Hak Woo, Hyung Mok Lee, Hong Bae Ann, Myungkook James Jee, Mansoo Choi, Changbom Park

Instrumentation and Methods for Astrophysics · Cross-listed from gr-qc

Introducing SINFONIA: Symplectic, slimplectic and Magnusian (Neural) Flows for Orbital Numerical Integration and Acceleration

Long-duration gravitational-wave modelling must resolve fast orbital motion together with slow dissipative evolution while preventing small numerical errors from accumulating into secular phase drift. Here we ask whether the finite-time evolution map itself can be learned as an explicit, differentiable, structure-preserving object and then repeatedly composed through a complete inspiral. We construct three neural-flow architectures: a symplectic and slimplectic flow on Galley's doubled phase space, [SINFONIA-J0]; a Taylor-anchored flow, [SINFONIA-J1]; and a Magnusian flow that learns the finite-time dissipative correction in the interaction picture, [SINFONIA-J2]. Applied to a 2.5PN neutron-star inspiral, all three expose the same controlling mechanism: long-time accuracy is governed not by pointwise map error alone, but by its signed projection onto a single secular channel fixed by energy–angular-momentum balance. Encoding this structure allows the learned maps to remain accurate through $10^{2}$–$10^{5}$ window compositions to coalescence at timesteps of a full orbital period and beyond, reaching chained phase errors orders of magnitude below a benchmark slimplectic integrator at lower cost. The same secular structure can also be exploited for physics inference: when the channel is left unconstrained, the accumulated phase retains enough information to recover an un-modelled dynamical-friction-like force, both parametrically and as a learned function of separation. Network-off controls isolate the contribution of learning from the analytic structure already built into each map. These results establish a proof of concept for structure-preserving learned evolution maps as tools for fast long-duration integration and physics inference in gravitational-wave source modelling.
Read the full abstract

Wednesday 2 September

Instrumentation and Methods for Astrophysics

The Accretion Explorer Interferometer (AEI) Phase I NASA Innovative Advanced Concepts Final Report

We must create superb X-ray images to understand the detailed physical processes behind some of the most powerful astronomical objects. The need to achieve this capability has been known for decades. But as time proceeds, X-ray astronomy falls further behind other wavebands that are steadily increasing their imaging capacity. Radio astronomy in particular has reached an angular resolution on the order of micro arcseconds via aperture synthesis interferometry, using the interference of electromagnetic waves from many small telescopes together to simulate having a much larger telescope. Developing an equivalent high-resolution capability in the X-ray band would be a game changer for high-energy astrophysics. We will understand how supermassive black holes grow and evolve. We will learn what powers astrophysical jets. We will learn how young, active stars affect the habitability of their planets. Technologically, our NIAC study has shown that the Accretion Explorer Interferometer (AEI) concept, unlike the original MAXIM concept, is more feasible in operation, being only 2 km long, versus approximately 450 km. Our study has also shown that satellite station keeping is possible, leveraging from LISA pathfinder technology, and using large mirror flats plus an X-ray beamsplitter for enabling technology is feasible.
Read the full abstract

All authors Kimberly A. Weaver, Jenna M. Cann, Kenneth Carpenter, Maurice Leutenegger, Takashi Okajima, Scott Rohrbach, Liz Matson, Craig Stevens, George Bussey, Jean-Etienne Dongmo, David Kim, Jess Lewis, Khashayar Parsay, Sharon Peabody, Alison Rao, Sara Riall, Marta Shelton, Kan Yang, Isabella Carlton, Webster Cash, Kaylee DeGennaro, Emma Kleiner, John Krizmanic, Erini Lambrides, Miranda McCarthy, Jeffrey McKaig, Atul Mohan, Teresa Monsue, Ryan Pfeifle, Mainak Singha, Melville Ulmer, Laura D. Vega, Kelly E. Whalen

Instrumentation and Methods for Astrophysics

Optimizing Field Geometry for Modular Micropore-Optics Soft X-ray Time-Domain Surveys

Wide-field micropore (lobster eye) optics enable focusing soft X-ray instruments with fields of view of hundreds of square degrees, but square-format modules require careful geometric arrangement to support both wide-area surveys and sensitive pointed observations. We examine this design problem using the X-ray TRansient Array / Micropore Optics X-ray Imager trade study, developed for a NASA Small Explorer mission concept, as a worked example. Single-module performance scaling is combined with geometric survey simulations to compare modular field layouts, overlap regions, and repeated survey tilings. For realistic micropore-optic parameters, increasing module size primarily expands the field of view once the boresight-centered effective area saturates, making modular architecture and field geometry central design variables. A three-module tri-petal configuration, formed by differentially rolling and offsetting three 10 x 10 sq deg square fields, produces a compound field of approximately 240 sq deg with one-module discovery regions, two-module bridge regions, and a compact three-module core. When repeated in a dense hexagonal lattice, the footprint closes gaps, builds a more uniform exposure floor, and provides enhanced-depth survey regions. This geometry offers an efficient compromise among survey coverage, pointed sensitivity, system complexity, and resilience, and can be scaled to larger persistent soft-X-ray monitoring architectures.
Read the full abstract

All authors Nicholas E. White, Massimiliano Galeazzi, Russell Roberts, Kip D. Kuntz

Instrumentation and Methods for Astrophysics · Cross-listed from astro-ph.HE

Single-pulse reanalysis of the 2024 Vela glitch and new observations of PSR~J0437$-$4715 and PSR~J1644$-$4559

The Pulsar Monitoring in Argentina (PuMA) collaboration systematically monitors southern glitching pulsars, maintaining high-cadence single-pulse records of the Vela pulsar. We present a pulse-per-pulse reanalysis of the 2024 major glitch of Vela (PSR~J0835$-$4510) with the 400~MHz-bandwidth ROACH backend of the Argentine Institute of Radioastronomy, and extend our machine-learning single-pulse pipeline—Isolation Forest outlier rejection, $\beta$-Variational-AutoEncoder denoising, and Self-Organizing-Map clustering—to new observations of PSR~J1644$-$4559 and the millisecond pulsar PSR~J0437$-$4715. For Vela, the 4- and 6-cluster decompositions of the eight days bracketing the glitch reproduce, with seven times the previous bandwidth, the behavior found with the narrow-band ETTUS receivers: higher-amplitude clusters peak earlier in phase, are narrower, more skewed, and less populated. With the glitch jump and its two exponential recovery terms included in the timing solution, the mean profile is stable to 1% across all eight days (width change $-0.5\pm0.9$% from pre- to post-glitch); omitting the recovery terms would mimic a post-glitch broadening of up to 55% through a folding-frequency error at the $10^{-7}$ level. The clusters of PSR~J1644$-$4559 differ almost exclusively in amplitude, as expected for a scattering-dominated profile. For PSR~J0437$-$4715, retaining the 10% of pulses with the highest peak-dominance score doubles the signal-to-noise ratio, and a five-cluster decomposition yields narrow, phase-ordered groups a factor $3.6\pm0.4$ narrower than the average profile, suggesting a $\sim$3.5-fold improvement in cluster-based timing precision for this pulsar-timing-array target, to be confirmed in a follow-up paper.
Read the full abstract

All authors Carlos O. Lousto, Ruby Shrestha, Ezequiel Zubieta, Susana B. Araujo Furlan, Guillermo Gancio, Federico García, Santiago del Palacio, Ryan Missel, Linwei Wang

Instrumentation and Methods for Astrophysics

A fast, wide-field, and real-time imaging prototype for large aperture arrays

Real-time processing on sub-millisecond timescales is essential for detecting fast astrophysical transients such as fast radio bursts (FRBs) and prompt electromagnetic counterparts to gravitational-wave mergers. Immediate localisation enables rapid multi-wavelength follow-up and maximises scientific return. As a result, real-time capability has become a key requirement for modern wide-field aperture arrays, which are increasingly being deployed at scales of thousands to tens of thousands of antenna elements. However, traditional correlator architectures scale as $\mathcal{O}(N^2)$, creating significant computational, bandwidth, and power challenges for large-$N$ arrays. These constraints often limit field of view, angular resolution, or observing duty cycle, ultimately reducing transient discovery potential. Direct imaging of the full field of view using E-field Parallel Imaging “Correlator” (EPIC) offers a promising alternative by avoiding the explicit formation of pairwise correlations. EPIC can achieve $\mathcal{O}(N \log N)$ computational scaling for dense aperture arrays and has been demonstrated on the Long Wavelength Array (LWA) station in Sevilleta (USA) using Graphics Processing Unit (GPU). However, GPU implementations can be limited by memory bandwidth in low-bitwidth gridding and Fast Fourier Transform (FFT) workloads. We, therefore, are developing a prototype implementation of EPIC using Field Programmable Gate Arrays (FPGA) that exploits highly parallel FFT pipelines to improve computational efficiency and reduce power consumption. Using preliminary results, we evaluate its performance particularly from the viewpoint of scalability, and discuss its suitability for next-generation instruments including SKA-Low and mid-frequency aperture arrays.
Read the full abstract

Instrumentation and Methods for Astrophysics · Cross-listed from gr-qc

DANSur_HM: Modularly incorporating higher modes in a deep learning based gravitational-wave surrogate

Numerical relativity (NR) simulations provide the most faithful representation of the gravitational waves (GWs) emitted by binary black hole (BBH) systems during merger. In the context of GW astronomy, tasks such as parameter estimation can require vast numbers of waveform evaluations per second across the entire parameter space. Since performing full NR simulations for each evaluation is not computationally feasible, interpolating methods for existing NR waveforms, known as surrogate models, have been developed with marked success. In this paper, we build on our previous work to introduce methods to train a fast surrogate model based on neural networks in order to generate BBH merger waveforms, including the fundamental (2,2) mode, as well as the (3,3), (2,1), (4,4), (3,2), (4,3) and (5,5) higher-order modes. Applying a pretraining step on approximant data before fine-tuning on NR data allows us to smooth out the parameter space, and making use of the parallelization ability of GPUs to project the NR waveforms in the inclination-phase $(\iota, \phi)$ sphere during training allows the fitting of all the explored modes simultaneously. The developed surrogate model, DANSur\_HM, achieves average mismatches of the order of $10^{-4}$, with the worst mismatch at $2.5\times10^{-3}$, and achieves throughput above $6\times10^5$ waveforms/second on an NVIDIA V100 GPU. Parameter estimation tests confirm the usefulness of the inclusion of higher modes.
Read the full abstract

All authors Osvaldo Gramaxo Freitas, Anastasios Theodoropoulos, Nino Villanueva, José A. Font, Antonio Onofre, Alejandro Torres-Forné, José D. Martin-Guerrero

Instrumentation and Methods for Astrophysics

The Impact of Artificial Space Objects on Optical Astronomy as Determined from 32 Million Photometric Observations

Photometric observations of satellites, rockets and space debris brighter than magnitudes 6.0, 7.0 and 8.0 are characterized. Those magnitudes pertain to different levels of interference with astronomy as defined by the International Astronomical Union. The densities of objects per square degree of sky and brighter than the magnitudes listed above are 0.38 e-3, 0.76 e-3 and 1.10 e-3, respectively. Probabilities of objects appearing on astronomical images depend on the field of view and the exposure duration. For objects brighter than magnitude 7.0 the probability that one will appear on a 10 second exposure of a 10 degree square field of view is 15%. The probability that an object is visible to the unaided eye under dark sky conditions is 59%. These percentages represent all nighttime hours. We discuss how they change with the Sun's distance below the horizon. Examination of data for objects launched since the start of the spacecraft constellation era shows that satellites account for most of the bright observations. If the plans of satellite operators to launch a million spacecraft are realized, nearly every astronomical image of a few seconds duration and several degrees in size may be contaminated during several hours of each night. Finally, people viewing the night sky may perceive satellites more strongly than stars.
Read the full abstract

Instrumentation and Methods for Astrophysics

High performance Stingray

X-ray astrophysical objects show variability on a wide range of timescales, i.e. from fractions of second to years. The open-source Python library stingray is able to perform time series analyses with a focus on high-energy astrophysics. Comprising the most commonly used Fourier analyses techniques, it also supports a range of additional extensions able to analyse pulsar data, simulate data sets and perform statistical modelling. With the latest release of the code, new Fourier methods and support for additional missions have been implemented, making Stingray more easily adaptable and extendable to other use cases. In this paper we focus on testing the performance and robustness of the latest version of stingray . We consider the possible different behaviour of the code when dealing with data sets smaller or larger than the RAM. We address the problem of dealing with large data sets and implemented parallel versions of the slowest methods in this regime. For small data sets, we investigate the possibility of a porting in GPU of key functions of the code.
Read the full abstract

All authors Eleonora Veronica Lai, Matteo Bachetti, Maura Pilia, Daniela Huppenkothen, Matteo Lucchini, Guglielmo Mastroserio, Hamza El Byad

Instrumentation and Methods for Astrophysics · Cross-listed from astro-ph.EP

The Ultraviolet Spectrograph on ESA's Jupiter Icy Moons Explorer Mission (JUICE-UVS)

The Jupiter Icy Moons Explorer (JUICE) mission, led by ESA, has an Ultraviolet Spectrograph (JUICE-UVS) contributed by NASA and built at Southwest Research Institute. JUICE-UVS is designed to provide a diversity of measurements to further our understanding of the potential habitability of icy ocean worlds at Jupiter and to study Jupiter and the Jovian system as an archetype for gas giants. JUICE-UVS observes photons in the 50-204 nm wavelength range at moderate spectral and spatial resolution along a 7.5 deg slit composed of 7.3 deg x 0.1 deg and 0.2 deg x 0.2 deg contiguous sections. JUICE-UVS performs a comprehensive study of icy satellite atmospheres, plumes, surfaces, and local space environments; Jupiter's atmosphere and aurora; Io and its Io Plasma Torus; and other Jupiter system targets (rings, small moons, etc.) as available. The variety of observational techniques employed include: nadir push-broom imaging, disk scans, limb stares, stellar and solar occultations, Jupiter transit observations, and neutral cloud/plasma torus stares and scans. This paper describes the UVS investigation's science plans, instrument details, concept of operations, and data formats in the context of the JUICE mission's habitability and Jupiter system goals.
Read the full abstract

All authors Kurt D. Retherford, Philippa M. Molyneux, Thomas K. Greathouse, Michael W. Davis, G. Randall Gladstone, Steven C. Persyn, Maarten H. Versteeg, Mary F. Araujo, Fran Bagenal, Tracy M. Becker, Arnaud Beth, Ronald K. Black, Bertrand Bonfond, Shawn M. Brooks, Emma J. Bunce, Alain Carapelle, Steven Cortinas, Gregory J. Dirks, Bryan Esquivel, Paul D. Feldman, Sue Ferrell, Mark Ferris, Leigh N. Fletcher, Matthew A. Freeman, Marina Galand, Rohini S. Giles, Denis Grodent, Vincent Hue, Erica Johnson, Joshua A. Kammer, Cynthia Kempe, Laurent Lamy, Adrian Martin, Melissa A. McGrath, Edward G. Nerney, Carlos Nuñez, Zachary Olsen, Norman Pelletier, Brandon Perez, Kristian B. Persson, Eric Quémerais, Rick Raffanti, Ujjwal Raut, Ryan Rickerson, Lorenz Roth, Oswald H. W. Siegmund, John R. Spencer, Andrew J. Steffl, Bradley J. Trantham, John V. Vallerga, Todd J. Veach, Michael A. Velez, Brandon C. Walther, the JUICE-UVS Team

Instrumentation and Methods for Astrophysics

GRINTA: a new Probe of the Dynamic Universe

Recent observations of the transient sky at all wavelengths are increasingly revealing the importance of the multi-messenger and multi-wavelength approach. The GRINTA (Gamma-Ray INternational Transient Array Observatory) mission, proposed for launch around the middle of the next decade, is conceived as a small mission with good sensitivity, excellent angular resolution and fast follow-up capability for studying transient sources at timescales from ms to hours, at the same time ensuring optimal integration with multi-messenger networks. The GRINTA mission will carry two complementary payloads to cover in total the 5 keV-10 MeV band, that will detect and localise gamma-ray bursts covering $\sim$ half of the sky and will be able to perform imaging surveys with sub-arcmin resolution. GRINTA will operate in synergy with the most powerful electromagnetic, gravitational wave and neutrino observatories foreseen to be operational after 2035.
Read the full abstract

All authors Lorenzo Natalucci, Philippe Laurent, Marica Branchesi, Mariateresa Fiocchi, Lorraine Hanlon, J. Miguel Mas-Hesse, Aline Meuris, Paul 'O Brien, James C. Rodi, Simone Scaringi, Konrad Skup, Norbert Werner, Silvia Zane, Julia Alfonso-Garzon, Biswajit Banerjee, Patrizia Barria, Anthony J.Bird, Soren Brandt, Gabriele Bruni, Floriane Cangemi, Gianluca Castignani, Eric Chassande-Mottin, Sylvain Chaty, Jerome Chenevez, Alexis Coleiro, Francesco Dazzi, Alessio L. De Santis, Phil Evans, Olivier Godet, Diego Gotz, Rene Hudec, Lucien Kuiper, Angela Malizia, Sheila McBreen, Sandro Mereghetti, Manuela Molina, Filip Munz, David Murphy, Gor Oganesyan, Francesca Panessa, Elena Pian, Jakub R{\i}pa, Oliver J. Roberts, Samuele Ronchini, Fabian Schussler, Vojtech Simon, Nial Tanvir, Alexey Uliyanov, Nello Vertolli, Stanislav V{\i}tek, Ugo Zannoni

Instrumentation and Methods for Astrophysics · Cross-listed from cs.LG

Do Tabular Foundation Models Know Physics? Contamination, Units, and the Deterministic Limit

Tabular foundation models (TFMs) learn to fill in tables the way language models fill in text, and tables are arguably the format in which most physical measurement arrives. Did they learn any physics in the process? They are Bayesian by construction, so the question is what their prior contains. We probe it directly, evaluating four of them (TabPFN-3, TabICLv2, TabDPT and Real-TabPFN-2.5) against six baselines on datasets sampled from 316 physical equations, in and out of domain. TFMs dominate, out of the box and after tuning. But we show that their prior can represent neither a noiseless mechanism nor physical units, which is why they interpolate physics without yet being able to act as physical models.
Read the full abstract

All authors Wassim Tenachi, Yashar Hezaveh, Laurence Perreault Levasseur, Pierre-Luc Bacon