Cosmology and Nongalactic Astrophysics
Papers
Fresh from arXiv, typeset properly. Highlighted words trade on the market.
Tuesday 19 May
Recent results from the Dark Energy Spectroscopic Instrument (DESI) provide evidence for a dynamical dark-energy component, whose equation of state appears to have recently crossed the phantom divide. In this Letter, we present an interacting dark-energy model, grounded in field theory, that naturally accommodates such a double crossing. In our framework, fermionic dark matter is coupled via a Yukawa interaction to a tachyonic scalar field governed by Born-Infeld dynamics. The phantom crossing arises at the level of the effective dark-energy equation of state, while the underlying scalar-field dynamics remains nonphantom and well bounded. We confront our model with data including BAO from the DESI (DR2) survey, CMB distance priors from Planck 2018, and the latest Type Ia supernovae compilations, obtaining robust constraints across the different data combinations and reconstructing a recent double crossing of the phantom divide. Furthermore, under naturalness assumptions, the model expects an ultralight fermionic dark matter mass of order $1.9\times10^{-3}\,\mathrm{eV}$, suggesting a possible connection with new light particles in the dark sector and motivating future tests with cosmological perturbations.
Superconductivity
Secondary Collective Excitations in Intermediate to Strong-Coupling Superconductors
Considering systematically derived energy-transfer-dependent effective electron-electron interactions leads to the appearance of secondary phase and amplitude modes in isotropic superconductors in the intermediate-to-strong-coupling regime. We study the implications of such interactions on Bravais lattices by computing the corresponding response functions using the iterated equations of motion (iEoM) approach. In the weak-coupling regime, we find the conventional, primary amplitude and phase modes at $\omega=2\Delta$ and $\omega=0$, respectively. For intermediate coupling, the amplitude mode detaches from the quasiparticle continuum towards lower energies. Increasing the coupling further leads to additional, long-lived secondary collective excitations below the continuum. This phenomenon is largely independent of the underlying lattice and the specific Fermi level. The amplitude and phase modes couple if the system is not particle-hole symmetric. Additionally, we extend the method to compute eigenoperators, i.e., linear combinations of operators that excite each secondary mode specifically. We identify nodal structures in the coefficients for these eigenoperators reminiscent of wave functions in the Hydrogen problem.
Read the full abstract
High Energy Physics (Phenomenology)
Renormalisation and invariants for two U(1)s
We revisit the renormalisation of models with two U(1) gauge symmetries, in a formulation with non-canonical gauge kinetic terms which is covariant under field reparametrisations among the two gauge bosons. This approach is convenient to study the appearance of kinetic mixing in scale evolution, because a coupling matrix is attributed to the gauge kinetic terms. We obtain simple MSbar renormalisation group equations up to two-loop, which can be solved to give effective millicharges at low energy which depend on the running couplings and heavy mass scales of the model. This formulation allows to construct “invariants” out of running Lagrangian parameters, which are invariant under generic gauge field reparametrisations, including rescalings, and which can be related directly to observables such as the millicharge.
Read the full abstract
Nuclear Theory
Deformed neutron halo nuclei and soft dipole excitations in the 40<A<90 mass region
We study deformed neutron halo nuclei in the mass region $40 < A < 90$ and their soft electric dipole ($E1$) excitations based on the deformed relativistic Hartree-Bogoliubov theory in continuum (DRHBc). Three candidates, $^{43}$Si, $^{69}$Ti, and $^{75}$Cr, are selected for detailed analysis. Unique features are identified in the decoupled densities of possible $s$- and $p$-wave deformed halo nuclei in this mass region, which are influenced by large high-$l$ configurations. It is shown that the dipole response is a highly sensitive observable to detect the halo component of the single-particle wave function in deformed halo nucleus, and it helps identify the configuration and the magnitude of deformation for halo nuclei in the $40 < A < 90$ mass region. Experimental confirmation of the dipole strength in the low-energy region is highly desirable to explore possible deformed halo candidates in the medium-heavy mass region.
Read the full abstract
High Energy Physics (Experiment)
Gaussian Process Eigenmodes for Statistical and Systematic Uncertainties in Template Fits
Template histograms are the foundation of statistical inference at the Large Hadron Collider. The HistFactory likelihood encodes template uncertainty through per-bin Barlow-Beeston gamma factors for Monte Carlo statistical error and through interpolation-based modifiers for systematic shape variations. These two mechanisms scale with the number of bins, which becomes problematic for multi-dimensional analyses and for templates constructed from limited Monte Carlo samples. We propose the use of eigenmode decomposition for efficiently estimating statistical and systematic uncertainties when replacing histogram templates with smooth functional representations derived from log-Gaussian Cox process posteriors fitted to the Monte Carlo data. The posterior covariance, augmented by rank-1 updates for each systematic shape variation, provides a unified eigenmode basis that encodes both statistical and systematic template uncertainty. Truncating to the leading eigenmodes replaces the full set of per-bin gamma factors and interpolation parameters with a small number of Gaussian-constrained amplitudes. We prove that this construction contains Barlow-Beeston as a limiting case and that the Gaussian Process posterior variance is bounded above by the Barlow-Beeston variance at every bin.
Read the full abstract
Fluid Dynamics
Two-point enstrophy dynamics in homogeneous isotropic turbulence
In the present work we investigate the multiscale dynamics of enstrophy in homogeneous isotropic turbulence by exploiting the two-point formalism provided by the Kármán-Howarth-Monin-Hill approach. The study is conducted on direct numerical simulations with a Taylor-based Reynolds number in the range of $140 \lesssim Re_{\lambda} \lesssim 400$. The two-point enstrophy budget at scales $r > 10 \eta$ appears to be entirely determined by production via vortex stretching, which balances enstrophy destruction, and to be dominated by the diffusive transport at smaller scales, thus preventing the emergence of a range dominated by the inertial transport of enstrophy. The decomposition in longitudinal and transverse contributions also highlights a dual nature of the inertial enstrophy flux. In particular, enstrophy appears to be transferred across scales through a non-trivial combination of direct and reverse interscale transfer. It is shown that the dual nature of this transfer is strictly related to the vortex stretching mechanism, which, in addition to producing enstrophy through vorticity amplification, also transfers longitudinal vorticity towards larger scales (by stretching the vortical elements) and transverse vorticity towards smaller scales (by contracting these vortical elements in the radial direction). The sum of these two contributions results in an overall transfer of enstrophy from large towards small scales. We propose the use of the pressure transport term as a proxy to obtain some information on the dynamics of relevant events of inertial energy and enstrophy transport. The new findings highlight the relevance of inertial compression events in longitudinal energy transport. At the same time, a good correlation between transverse energy transport events and the radial contraction of vortical elements due to vortex stretching mechanisms is also found.
Read the full abstract
Optics
Quantum analysis of a multi-frequency laser with a photonic time crystal
The present study considers the operation of a laser that incorporates a photonic time crystal (PTC), the purpose of which is to generate a field characterised by multiple widely separated optical frequencies. This laser is the subject of both a proposal and theoretical investigation. The laser comprises an active medium and a PTC within a small cavity constructed from two photonic crystals that are positioned in an overlapping configuration. PTC is modulated by an external field. The spikes in the laser field spectrum are separated by the PTC modulation frequency. The development of a quantum model of the laser with PTC has been achieved, and the analysis of a lasing mode with multi-frequency spikes has been made. The investigation focused on the study of lasing conditions, output power, and the lasing field spectra. The experimental realization of the multi-frequency laser with PTC under realistic conditions is discussed.
Read the full abstract
Lattice Field Theory
Charmonium properties at high temperatures from lattice QCD
We study charmonium properties at non-zero temperature in the temperature range 153 MeV $<T<$ 305 MeV using lattice QCD. We use HISQ action for dynamical quarks and Wilson clover action for valence charm quarks and calculate the correlation function of extended meson operators. Our lattice QCD results are consistent with the existence of all charmonium states below the open charm threshold in this temperature region. However, charmonium states acquire sizable thermal width, which increases with increasing temperature. The size of the thermal width follows the hierarchy of charmonium sizes, i.e. the smaller ground state charmonium has a smaller thermal width than the larger excited charmonia.
Read the full abstract
Mathematical Physics
Concurrent enforcement of polyconvexity and true-stress-true-strain monotonicity in incompressible isotropic hyperelasticity: application to neural network constitutive models
The design of physics-augmented neural networks (PANNs) for the purposes of constitutive modeling has received considerable attention as of late for a variety of material behaviors. Here, we revisit the classical framework of isotropic incompressible hyperelasticity in light of recent advances in the study of constitutive inequalities. We show that polyconvexity implies true-stress-true-strain monotonicity for a large class of incompressible strain-energy functions. The resulting elastic law obeys the physically reasonable Legendre-Hadamard (or ellipticity) condition as well as the notion of increasing stress with increasing strain. These results then inform the architecture of four distinct PANNs which are subsequently calibrated to three different sets of experimental data each. We show that different PANN parametrizations - satisfying the same constitutive constraints a priori - have varying approximation power for the description of material behavior. Moreover, even when distinct parametrizations perform comparatively well within the calibration regime, they show pronounced differences in extrapolation. This observation motivates a critical discussion about the predictive power of PANNs which also has implications for the modeling of more complex material behavior by virtue of neural networks.
Read the full abstract
Strongly Correlated Electrons
Vortex order in magnetic frustrated GeNi$_2$O$_4$ and GeCo$_2$O$_4$ spinels
In the search for new spin textures based on singular magnetic objects like Bloch-points or vortices, spinel compounds emerge as an interesting playground due to the interplay between magnetic anisotropy and complex interactions that extend well beyond first neighbors on a pyrochlore lattice. Based on an exploration of the exchange interaction phase diagrams of members of the Ge$B_2$O$_4$ family with $B$=Co and Ni, we show, using simultaneous modeling of inelastic neutron scattering measurements and single-crystal neutron diffraction data, that a 2-$k$ magnetic structure may be stabilized in these compounds. This leads to a short period spin vortex crystal, a variant induced by the magnetic anisotropy of the 3-$k$ Bloch-point structure predicted for isotropic spins. Our study rationalizes the formation of these multi-$k$ spin textures in frustrated antiferromagnets, as well as their anisotropy-dependent evolution.
Read the full abstract
Atmospheric and Oceanic Physics · Cross-listed from cs.LG
Training-Free Bayesian Filtering with Generative Emulators
Bayesian filtering is a well-known problem that aims to estimate plausible states of a dynamical system from observations. Among existing approaches to solve this problem, particle filters are theoretically exact for non-linear dynamics and observations, but suffer from poor scalability in high dimensions. In this work, we show that diffusion-based emulators of dynamical systems can be used to implement, without additional training, an optimal variant of particle filters that has remained largely unexplored due to implementation challenges with classical numerical solvers. Experiments on nonlinear chaotic systems, including atmospheric dynamics, demonstrate that the proposed approach successfully scales particle filtering to high-dimensional settings.
Read the full abstract
Cosmology and Nongalactic Astrophysics
ComPACT: Mass-Redshift Properties of the galaxy cluster catalogue
Machine-learning methods are increasingly applied to astronomical surveys, providing powerful tools for detecting and studying galaxy clusters. We investigate the mass-redshift properties and completeness of the ComPACT galaxy cluster catalogue, constructed using a convolutional neural network applied to publicly available combined ACT+Planck maps. The ComPACT catalogue contains 2,962 SZ-selected galaxy cluster candidates. We confirm clusters by estimating redshifts using literature information and photometric techniques based on DESI Legacy Imaging Surveys data. Cluster masses are derived from ACT+Planck and Planck Compton-y maps via SZ scaling relations. The completeness is assessed using simulated cluster injections into real microwave maps. We confirm approximately $\sim$60 % of the ComPACT candidates as galaxy clusters. The redshifts span the range $0.007 < z < 1.7$, including approximately 116 new measurements. Masses are obtained for 56 % of the sample, covering the range $(0.25 - 13.1) \times 10^{14} ~M_\odot$ and including 158 new mass determinations. We identify five previously unreported massive clusters ($M_{500c} > 6 \times 10^{14}~M_\odot$) at $z > 0.7$, increasing the known population of such systems by approximately 10 %. The ComPACT catalogue expands the SZ-selected Planck-like cluster population, especially at high redshift and high mass, demonstrating the effectiveness of deep-learning approaches for cluster detection in microwave data.
Read the full abstract
Materials Science
Spin Response Properties in Electronically Robust Ferromagnetic Strained CrSiSe$_3$ Monolayer under External Electric Fields
Integrating two-dimensional van der Waals magnets into field-effect spintronic devices requires robust charge stability and tunable spin responses. In this study, we investigate the electronic, topological, magnonic, and magneto-optical properties of the strain-engineered ferromagnetic CrSiSe$_3$ monolayer under out-of-plane external electric fields by using first-principles calculations. We find that for this material, the intrinsic charge sector, including the indirect band gap, charge Berry curvature, optical conductivities, and magneto-optical Kerr effect spectra, exhibits exceptional robustness against applied fields up to 0.3 V/$\r{A}$. Conversely, the spin degrees of freedom demonstrate highly sensitive tunability. Electrostatic gating significantly modulates the spin Berry-like curvature, driving a non-monotonic enhancement in the spin Hall conductivity. Furthermore, external fields effectively tune collective magnon excitations by modifying microscopic Heisenberg exchange interactions. Such coexistence of robust charge immunity and flexible spin manipulation establishes the strained CrSiSe$_3$ monolayer as a promising platform for stable spintronic devices.
Read the full abstract
Strongly Correlated Electrons
Tunable magnetotransport through kinetically hindered first-order phase transitions in an antiferromagnetic metal
Controllable multilevel resistance states are of interest for memory technologies like neuromorphic computing, but robust materials platforms toward such behavior remain limited. Here, we show that the non-centrosymmetric antiferromagnetic metal CeCoGe$_3$ suggests one such route through a kinetically hindered first-order magnetic transition. Cooling through the kinetically hindered first-order transition in an applied magnetic field produces a magnetic glass state in which high- and low-temperature magnetic phases coexist. The relative fraction of these phases can be controlled by the applied field in which the sample is cooled, and the electrical resistance is directly sensitive to that fraction. As a result, it is demonstrated that CeCoGe$_3$ supports stable multilevel resistive states. These results identify kinetically hindered first-order phase transitions as a promising route towards controllable multilevel magnetoresistive states.
Read the full abstract
Quantum Physics
Bounded Dyson maps and cavity-driven transitions in a time-dependent non-Hermitian spin-boson model
We study a time-dependent non-Hermitian extension of the Schütte-Da Providência spin-boson Hamiltonian with complex couplings. A time-dependent Dyson map relates the model to a Hermitian counterpart and induces a positive physical metric. Separating the positive and unitary parts of the map, we prove a no-go result for a natural Gaussian number-squeeze-number class: for a nonvanishing linear spin-boson interaction, Hermiticity and bounded invertibility force the entire bosonic part of the Dyson map to be unitary. The squeezing parameter therefore selects a time-dependent Hermitian frame rather than contributing to the metric. The squeezed and non-squeezed Hamiltonians are related exactly by a time-dependent unitary transformation. The conserved quantity formed from the boson number and spin projection is replaced by a transported dynamical invariant, so a closed squeezing-frame protocol cannot generate transitions between distinct invariant sectors. We then introduce an independently driven single-mode cavity with quadratic term $i\chi(t)(b^{\dagger2}-b^2)/2$. This physical drive breaks the corresponding continuous symmetry while preserving parity and couples dressed sectors differing by two bosonic quanta. The non-Hermitian asymmetry parameter, which also determines the bounded metric, tunes the effective Hermitian coupling, transition strengths and resonance conditions. Direct numerical propagation confirms the distinction between passive frame-induced mixing and genuine cavity transitions, the asymmetry-controlled resonance shift, and the validity of the first-order transition formula in the weak-driving regime.
Read the full abstract
Materials Science
Geometry-Dependent Crack Interaction and Toughening in Graphene
The interaction between neighboring cracks has been shown to strongly influence the fracture behavior of graphene. While previous studies focused primarily on crack spacing, the role of crack width remains poorly understood. Here, computational simulations are performed to investigate the coupled effects of crack width and inter-crack spacing $(W_\text{gap})$ on the tensile response of graphene containing parallel cracks. The results show that increasing crack width amplifies the sensitivity of mechanical properties to crack spacing, leading to significant enhancement of peak stress, fracture strain, and toughness at sufficiently large $W_\text{gap}$. For narrow cracks, crack coalescence dominates and causes brittle failure. In contrast, wider cracks promote delayed ligament rupture, increased energy absorption and ductile-like fracture behavior. The normalized toughness and fracture strain exceed those of equivalent single-crack systems by more than twofold. A crack-geometry design map is proposed to identify regimes of crack coalescence, independent propagation, and enhanced toughness.
Read the full abstract
High Energy Physics (Experiment)
Search for soft unclustered energy patterns containing muons in the final state in $pp$ collisions at $\sqrt{s}$ = 13 TeV with the ATLAS detector
Soft unclustered energy patterns (SUEPs) refer to high-multiplicity, isotropic distributions of low-momentum particles that could arise in strongly-coupled hidden sector theories. A search for SUEPs whose decay products contain muons in the final state is presented using 140 fb$^{-1}$ of proton-proton collision data at $\sqrt{s}$ = 13 TeV collected by the ATLAS detector at the Large Hadron Collider during 2015-2018. The analysis targets SUEP signatures via gluon-gluon fusion production of a scalar mediator in Hidden Valley scenarios. No significant excess over the Standard Model expectation is observed. Exclusion limits are set on the product of the mediator production cross section and the branching fraction for its decay into a SUEP, down to 0.05 fb for a mediator mass of $m_S$ = 750 GeV, 0.4 fb for $m_S$ = 400 GeV, and 70 fb for $m_S$ = 125 GeV; the last value, when identifying the mediator with the Standard Model Higgs boson, translates to an upper limit on the branching fraction of around 0.2%.
Read the full abstract
High Energy Physics (Theory)
Approaching the surface of an Exotic Compact Object
Many approaches to quantum gravity require replacing the traditional black hole geometry with an Exotic Compact Object (ECO), which has a large but not infinite redshift at its surface. We argue that near the ECO surface, the vacuum Einstein equations imply a metric that is chaotic, with increasingly large oscillations as we approach the surface. This behavior is analogous to the `cosmic billiards' found in the BKL analysis of cosmology near the big bang. For the ECO, some of the potential walls of this billiards change sign to become `cliffs', resulting in a runaway behavior where some compact directions squeeze to zero size. In string theory such squeezing yields a natural continuation to the interior geometry of fuzzballs, where compact directions collapse to create monopoles.
Read the full abstract
Materials Science
Mesoscale Domain Evolution Mechanism during Alternating Current (AC) Poling of Relaxor Ferroelectrics
Ferroelectric domain variants that are energetically equivalent are expected to remain preserved during polarization reversal under a symmetry-preserving electric field. However, recent experiments on relaxor-ferroelectric crystals have revealed irreversible elimination of inclined domain walls during AC poling, while the underlying mesoscale mechanism remains unclear. Here, we investigate the domain-wall motion during AC poling of rhombohedral Pb(Mg$_{1/3}$Nb$_{2/3}$)O$_3$–PbTiO$_3$ single crystals containing both 71$^\circ$ and 109$^\circ$ domain walls within a quasi-two-dimensional laminated geometry using phase-field simulations. The simulations reveal that the domain-wall behavior during polarization reversal depends on the spacing ratio between the 71$^\circ$ and 109$^\circ$ domain walls. Closely spaced 71$^\circ$ domain walls undergo irreversible elimination, whereas more widely separated walls are preserved, while the 109$^\circ$ domain walls remain intact. A threshold ratio for domain-wall elimination is identified and found to depend on the mechanical boundary conditions. By tracking the domain-wall trajectories during the switching process, we attribute this behavior to unsynchronized motion of neighboring 71$^\circ$ domain walls arising from long-range elastic interactions when the walls become strongly coupled. This collective motion breaks the symmetry between energetically equivalent domain variants and leads to irreversible domain-wall elimination during polarization reversal. These findings provide mechanistic insight into collective domain-wall evolution during polarization reversal and suggest that proximity-driven symmetry breaking may provide a mesoscale mechanism for domain engineering in ferroelectric materials with high domain-wall densities.
Read the full abstract
Mathematical Physics
Numerical approach to the modular operator for fermionic systems
We numerically approximate the Tomita-Takesaki modular operator for local subalgebras of the 1+1-dimensional massive Majorana field. Our method works at the one-particle level with a discretisation of time-0 data in position space. The local subspaces we consider are associated with one double cone and with the disjoint union of two double cones. In order to avoid boundary effects, we primarily choose the overall spacetime to be a cylinder; different choices of boundary conditions (antiperiodic and periodic) are considered. We compare our numerical results to known analytic expressions in the massless case. It turns out that the modular operator has a non-trivial dependence on the mass. In the case of two double cones, the modular generator does not only have ”local” contributions (supported on the diagonal in configuration space) but also ”bilocal” terms (connecting the two double cone regions); we find the latter to be less prominent at higher masses, in line with expectations.
Read the full abstract
Mesoscale and Nanoscale Physics
Ellipticity effects on diffusive magnon spin and heat transport in easy-plane ferromagnets
When a magnetic material hosts spin-wave excitations, or magnons, the local magnetization can rotate in circular or elliptical orbits, the latter arising naturally in the presence of magnetic anisotropies transverse to the equilibrium magnetization. This article investigates the diffusive transport of elliptical magnons in easy-plane ferromagnets. Our analysis starts with the derivation of the magnon dispersion relation and magnon spin from the Landau-Lifshitz-Gilbert equation with a perpendicular magnetic anisotropy. Then, using the Boltzmann transport equation in the relaxation time approximation and perturbation analysis, the magnon-spin and magnon thermal conductivities are obtained, quantifying the magnon transport in the insulator. Our calculations demonstrate that, in both three- and two-dimensional systems, the effects of ellipticity on magnon transport coefficients result in an enhancement or a decrease, depending on whether magnets with a easy or hard perpendicular-to-plane axis are considered, respectively. On the other hand, our results predict an enhancement of the magnon heat transport for both easy- and hard-axis magnetic systems. Our study supports previous works on magnon ellipticity and makes a step towards clarifying its effect on magnon transport properties.
Read the full abstract
Optics
Reconfigurable generation of high-power structured light via nonlinear beam shaping
High-power structured light has a wide range of applications, from material processing and high-capacity optical communications to programmable electron beams, plasmas, and nuclear states. On-demand generation of structured light and adaptive control of beam profiles are essential for many practical applications, but are difficult to achieve at high power. Here, we demonstrate reconfigurable generation of structured light from a high-power multimode-fiber laser amplifier through full-field control of a low-power seed. An efficient nonlinear beam shaping scheme based on a local linear approximation of the complex nonlinear input–output relation is developed and realized in situ. Diverse structured beams such as Gaussian, Bessel, vector and orbital angular momentum beams are directly generated from the fiber amplifier at powers exceeding 500 W. Our scheme enables real-time programmability of structured light and is readily scalable to even higher power levels. This work provides a general framework for controlling high-dimensional nonlinear systems without accurate knowledge or tractable model.
Read the full abstract
Fluid Dynamics
Performance Evaluation of RANS-Based Turbulence Models in Predicting Turbulent Non-Premixed Swirling Combustion within a Realistic Can Combustor
This study has presented a comprehensive computational fluid dynamics (CFD) analysis of combustion flow in a realistic can combustor, evaluating the influence of various turbulence models on flow, thermal, and species fields. The non-premixed combustion modeling is performed using a presumed (beta) PDF approach in conjunction with a steady laminar flamelet model employing the San Diego reaction mechanism, and the turbulence is modeled using the RANS approach. The influence of turbulence models (standard $k-\epsilon$, realizable $k-\epsilon$, SST $k-\omega$, LPS-RSM) on the velocity field, such as the mean axial velocity, mean transverse velocity, turbulent kinetic energy (TKE) and shear stress, is analyzed, besides their influence on temperature and species (\ce{C3H8}, \ce{CO2}, and \ce{CO}) concentration. Analysis showed that despite the shortcomings of the isotropic turbulent viscosity formulation of the SST $k-\omega$ model being evident, it predicted the mean axial velocity, mean transverse velocity, turbulent kinetic energy and shear stress more accurately. Additionally, it predicted the flow features expected in a can combustor, such as the central recirculation zone (CRZ) and central vortex core (CVC), more accurately than other models. Besides, the model predicted a higher temperature in the primary zone, which is supported by a lower prediction of \ce{C3H8}, and elevated TKE, both of which support strong mixing and efficient heat release. Furthermore, the SST $k-\omega$ model predicted the most compact stoichiometric mixture fraction bubble, encompassing CRZ and shear layers, indicating that the majority of the combustion occurs in the primary zone. The corresponding progress variables also indicated high values in the primary zone and shear layers, confirming near completion of the reaction, supported by negligible prediction of \ce{C3H8} and \ce{CO} at the outlet.
Read the full abstract
Computational Physics
Diversity-Aware Batch-Mode Active Learning for Efficient Sampling in Data-Driven Constitutive Modeling
The constitutive behavior of materials is modeled through relationships between stress, strain, and possibly additional internal variables. This results in relatively high-dimensional feature spaces for machine learning models rendering the efficient generation of informative datasets essential as brute force methods suffer from the curse of dimensionality. This work introduces a diversity-aware batch-mode query-by-committee active-learning strategy to generate datasets of maximum information content at minimum cost. In contrast to existing methods, this novel method selects multiple informative, non-redundant queries per iteration, enabling concurrent generation of informative datasets and reducing the number of machine-learning retraining cycles. A central component of this method is a cosine-similarity-based metric that complements the uncertainty criterion based on committee variance by promoting within-batch diversity. The query selection is guided by committee variance and a diversity-promoting criterion. The approach is benchmarked for efficient stress-space sampling in data-driven constitutive modeling. In this setting, a committee of support vector classifiers approximates the so-called yield surface, which is a manifold dividing the six-dimensional stress space into an elastic and plastic domain. We demonstrate that the method handles different batch sizes robustly, maintains high within batch diversity, and rapidly reduces committee uncertainty. The resulting machine learning yield surfaces achieve predictive accuracy comparable to sequential active learning, while requiring substantially fewer retraining cycles. This makes the proposed approach an efficient strategy for stress space sampling in data driven constitutive modeling and for reducing time to solution via concurrent data collection in each iteration.
Read the full abstract
Instrumentation and Detectors
Development of an RPC-based gaseous photodetector with picosecond resolution
This experimental particle-physics thesis reports the latest developments on the GasPM, a novel gaseous photodetector aimed at suppressing beam-induced backgrounds in the electromagnetic calorimeter for a potential upgrade of the Belle~II experiment. The GasPM technology is based on combining a photocathode with a resistive-plate chamber offering high efficiency, excellent time resolution, and cost-effective scalability. A further advantage is that, combined with a radiator, the GasPM offers precise Cherenkov-based charged-particle identification. As part of a project launched in 2017, this work aims at addressing the degradation in time resolution observed in a previous beam test over what was achieved earlier with laser light. I focus specifically on ultraviolet-photon emission during excitation and de-excitation of the gas molecules, which leads to a secondary signal that in turn spoils time resolution (photon feedback). I design and execute an improved beam test that, along with several configuration changes, newly introduces single-vs-multiple electron discrimination and high-frequency signal readout. In addition, I probe through a cosmic-ray test the quantum efficiency of a new LaB$_6$ photocathode resistant to damage from ions drifting backwards, for use in future beam tests. The principal results are the development of an algorithm to efficiently suppress photon feedback; a preliminary calibration of a novel digitiser; the achievement of discrimination between single- and multiple-electron events; and an early qualification of a LaB$_6$ photocathode. These results are being prepared for showing at the 7th International Workshop on New Photon Detectors organized in Bologna in December 2025 and pave the way for an upcoming beam test of an improved GasPM prototype.
Read the full abstract
High Energy Physics (Phenomenology)
Lindblad-driven quarkonium production in heavy-ion collisions
We study the production of the conventional quarkonium states in ultrarelativistic heavy-ion collisions using an open quantum system framework based on the Lindblad equation. Starting from the complex-valued in-medium potential, we derive the dissociation temperature and thermal decay width for each state, and compute their survival probabilities for a system undergoing Bjorken expansion. We then extend the framework to include recombination from thermalized charm and bottom quarks in the quark-gluon plasma, deriving a coalescence model for quarkonia from the Lindblad equation under the adiabatic approximation. The methodology provides a unified, first-principles-inspired description of suppression and recombination for both charmonium and bottomonium.
Read the full abstract
Quantum Physics
Developing a photon-number-resolving detection chain for quantum communication protocols involving mesoscopic states of light
We present the characterization of a photon-number-resolving detection chain based on Silicon photomultipliers (SiPM) coupled to a 14 bit, 1 Gs\s digital acquisition system embedding an FPGA-based signal processing pipeline that performs real-time baseline subtraction, digital deconvolution, and charge integration. Three SiPM models manufactured by Hamamatsu are tested and compared in the mesoscopic intensity regime using both classical coherent states and quantum twin-beam states, enabling a systematic investigation of the effects of pixel pitch, pile-up, and photon detection efficiency on the detector performance.
Read the full abstract
Materials Science
Adaptive Slater Koster Parameters: Crossing Oxidation States with Density Functional Tight Binding
We propose to adapt the confined pseudo-atomic orbitals underpinning the precalculated Slater-Koster (SK) interaction tables in Density Functional Tight Binding (DFTB) to local atomic environments. We demonstrate significant improvement in electronic structure and energetics in the application to a partially oxidized Ni surface and Li insertion into graphite, where we assign optimal SK parameters to metal atoms in different oxidation states. Further analysis reveals the smoothness of the SK integrals across the varying oxidation states. Exploiting this, we introduce a site-resolved machine-learning scheme for fully adaptive DFTB. Using atomic descriptors and simple regression architectures already established in the context of machine-learning interatomic potentials, our scheme achieves 95% band-structure accuracy across all Ni-O binary compositions in the Materials Project.
Read the full abstract
Optics
Antireflection by design in bilayer metasurfaces
Antireflection coatings are ubiquitous in optical systems, where they maximize transmission and suppress undesirable reflections by impedance-matching uniform interfaces. Extending this principle to metasurfaces, however, is fundamentally more challenging because wavefront control requires a library of geometrically distinct meta-atoms, each locally imposing a prescribed phase that is tethered to its transmittance. Here, we show that vertical integration resolves this constraint by allowing bilayer meta-atoms to operate simultaneously as a phase shifter and an impedance-matching stack. Using an effective thin-film model, we derive a design rule that links the effective indices of two independently patterned layers and identifies antireflective bilayer libraries with full $0$-$2\pi$ transmission-phase coverage. We realize this concept in a free-standing TiO$_2$/TiO$_2$ metalens operating at 1310 nm, which suppresses reflectance below that of bare glass while preserving diffraction-limited focusing. These results establish bilayer metasurfaces as a framework for co-engineering optical impedance and wavefront response at the meta-atom level.
Read the full abstract
Solar and Stellar Astrophysics
Simulating the Convective Urca Process with Multiple Urca Pairs in a Simmering White Dwarf
Type Ia supernovae are bright thermonuclear explosions of one or more white dwarf stars. The exact origin and explosion mechanism for these supernovae is still poorly understood. In the near-Chandrasekhar mass progenitor model, a simmering phase precedes the explosion. During this simmering phase, central carbon burning heats the core and drives convection. A poorly understood aspect of this phase is the convective Urca process, a linking of weak nuclear reactions and convective mixing. Convective Urca has the potential to alter characteristics of the convection zone and thus alter the evolution of the white dwarf. To study the convective Urca process, we use the low Mach number hydrodynamic code MAESTROeX to run 3D simulations of the convection zone. We build off previous work to implement a more comprehensive carbon burning network and include the A=21, A=23, and A=25 Urca pairs in the simulations. We compare simulations with and without the convective Urca process to isolate the direct effects the process has on the convection zone. We find the convective Urca process reduces the efficiency of convective mixing near the the convective boundary, but does not restrict the size of the convection zone. We additionally find the A=23 Urca pair to be the most important Urca pair to the convective Urca process in these simulations. All together, our results better inform our understanding of this complex phenomena as well as demonstrates the range of potential convective structures, particularly at the convective boundary, of a simmering white dwarf.