Peer Revenue Play credits. Real papers.

Papers

Fresh from arXiv, typeset properly. Highlighted words trade on the market.

Physics

Watch Physics (sign in to use)

Wednesday 13 May

Materials Science

Layer thickness dependent band gap of MBE grown single- to few-layer MoS$_{2}$

In light of the rise of transition metal dichalcogenides as 2D semiconductors for device applications, band engineering becomes very important from an application point of view. In many of these materials, such as the canonical example of MoS$_{2}$, the semiconductor band gap depends on the layer number. It changes from indirect to direct as it evolves from a bulk semiconductor to a monolayer. Interestingly, it was predicted and experimentally confirmed that, by thinning the material from bulk to a bilayer, the indirect transition shows a strong blue-shift. Here, we present the results of scanning tunnelling spectroscopy measurements on MoS$_{2}$ that has been grown in situ via molecular beam epitaxy on graphene on Ir(111) at thicknesses ranging from 1 to 5 layers. We find a drastic decrease of the band gap with increasing layer number, to values even below the band gap in bulk. We also observe that the pinning of the conduction band vanishes above 4 layers. Comparing our experimental data with density functional theory and GW calculations indicates that an additional screening is introduced by the sample growth conditions.
Read the full abstract

All authors Maciej Bazarnik, Thorsten Deilmann, Marta Przychodnia, Anika Schlenhoff

General Relativity and Quantum Cosmology

Cosmological horizons in regular bouncing backgrounds

It is often stated that a phase of standard, decelerated cosmological expansion is characterised by the absence of global event horizons, while a phase of accelerated expansion is associated with the absence of particle horizons. This is not necessarily true because such horizons, being non-local properties of the spacetime geometry, depend on the full (past and future) history of the given cosmological background. We provide examples of various different scenarios for the case in which the final asymptotic phase of standard expansion and decreasing curvature is connected, through a regular bounce, with an initial (and possibly infinitely extended in time) regime of growing curvature.
Read the full abstract

Astrophysics of Galaxies

Tracing the sulfur depletion in starless and pre-stellar cores

Sulfur is one of the most abundant elements in the Universe, yet the sulfur budget inferred from the observed sulfur-bearing molecules in dense cores is significantly lower than expected. Starless and pre-stellar cores represent the earliest stages of star formation and provide a laboratory for studying the physical and chemical processes that cause sulfur depletion. We aim to constrain sulfur chemistry in dense cores by measuring abundances of sulfur-bearing molecules and how they reflect core evolution and environmental effects. We observed nine cores in the Taurus Molecular Cloud, targeting 13 sulfur-bearing molecules, including CS, CCS, C$_3$S, OCS, SO, SO$_2$, H$_2$CS, and isotopologs. Molecular abundances and six abundance ratios were compared to three evolutionary tracers: H$_2$ column density, N$_2$D$^+$/N$_2$H$^+$, and the CO depletion factor. We also compared observations with 0D chemical models with different initial sulfur abundances. We find variations in abundances across cores. L1517B exhibits low abundances and a high depletion factor, whereas L1495B shows enhanced levels in oxygen-bearing species within the L1495 filament. Ratios tracing carbon- and oxygen-bearing species (CCS/$^{34}$SO and C$^{34}$S/$^{34}$SO) decrease with increasing H$_2$ column density and N$_2$D$^+$/N$_2$H$^+$ ratio. Other species and ratios show weak or no correlation with tracers. Models reproduce OCS, H$_2$CS, and HDCS reasonably well, but not all species simultaneously, especially between carbon- and oxygen-bearing molecules. The variations and lack of consistent correlations suggest that a single evolutionary parameter cannot describe sulfur chemistry and that the local environmental conditions strongly influence the observed abundances. Reproducing the full sample of sulfur-bearing molecules would require improved chemical networks and models that account for the core's physical structure.
Read the full abstract

All authors L. Schöller, S. Spezzano, O. Sipilä, E. I. Makarenko, P.Caselli, H. A. Bunn, S. S. Jensen

Fluid Dynamics

Effects of Thermal Boundary Conditions on Natural Convection and Entropy Generation in Non-Newtonian Power-Law Fluids

This study investigates the role of thermal boundary conditions on natural convection and entropy generation in non-Newtonian power-law fluids confined within a square cavity and a concentric cylindrical annulus. Steady, two-dimensional governing equations based on the incompressible power-law model and the Boussinesq approximation are solved using the Gridap.jl finite element framework. The numerical methodology is validated against benchmark solutions for both Newtonian and non-Newtonian convection, showing good agreement in terms of isotherm fields, streamlines, local Nusselt number distributions, and entropy generation. The effects of fluid rheology and heating mode are examined for shear-thinning, Newtonian, and shear-thickening fluids under uniform and non-uniform thermal boundary conditions. The results show that shear-thinning behavior enhances buoyancy-driven circulation, steepens thermal gradients, and increases heat transfer, whereas shear-thickening behavior suppresses convection and promotes conduction-dominated transport. Thermal boundary conditions are found to play an important role in controlling the intensity and spatial distribution of flow, heat transfer, and irreversibility. In both geometries, uniform heating produces stronger and more distributed convective structures, while non-uniform sinusoidal heating localizes thermal forcing and consistently reduces total entropy generation. An entropy analysis further reveals that viscous dissipation dominates irreversibility in shear-thinning fluids, whereas heat-transfer irreversibility becomes dominant as the power-law index increases. The study demonstrates that appropriate thermal boundary design, together with fluid rheology, provides an effective route for controlling heat transfer and minimizing thermodynamic losses in non-Newtonian convection systems. The source code and metadata are publicly available.
Read the full abstract

Instrumentation and Detectors

SINAPSE: A lightweight deep learning framework for accurate and explainable neutron-$\gamma$ discrimination

Traditionally, neutron-$\gamma$ discrimination in organic scintillators relies on techniques such as time-of-flight (ToF) selection and pulse-shape discrimination (PSD). However, particle identification through graphical cuts remains challenging in the low-charge regime due to poor signal-to-noise ratios (SNR). In this work, we propose SINAPSE, a lightweight deep learning framework for accurate and explainable neutron-$\gamma$ discrimination in the low-charge regime. The framework employs a dual-branch architecture that combines a 1-dimensional convolutional autoencoder for waveform denoising with a classifier for particle identification. Random augmentations are applied to high-SNR waveforms to simulate low-charge conditions, enabling robust extrapolation into regimes where conventional PSD labels are unreliable. We show that SINAPSE achieves superior denoising performance compared to conventional digital signal processing techniques, and outputs well-calibrated probabilities, consistent with traditional graphical cuts. Finally, we apply SHAP (SHapley Additive exPlanations) values to show that model decisions are driven by physically meaningful pulse-shape features, confirming consistency with established PSD principles.
Read the full abstract

All authors Thomas Carreau, Adrien Matta, Owen Syrett, Benoît Mauss, David Etasse, Cyril Lenain, Pierre Morfouace, Julien Taieb, David Regnier, Patrick Copp, Matthew Devlin, Charlène Surault, Jason Surbrook

Statistical Mechanics

Thermodynamic Geometry of two-dimensional square-well fluids

Thermodynamic geometry of two-dimensional fluids has been investigated using a square-well model as a prototype fluid. A comparison with the three-dimensional case is performed in the subcritical and supercritical domains of thermodynamic space. In the subcritical region, it is found that the R-crossing method has a narrower range of validity for two-dimensional fluids compared to three-dimensional ones. On the other hand, in the supercritical region, an analysis of different Widom lines, including the R Widom line, shows that for two-dimensional fluids these lines extend further into the supercritical region than their three-dimensional counterparts. A similar behavior is observed for the validity of the Clausius–Clapeyron equation in two-dimensional fluids.
Read the full abstract

Optics

DeepFilters: Scattering-Aware Pupil Engineering with Learned Digital Filter Reconstruction for Extended Depth of Field Microscopy

Extended depth of field microscopy encodes axial information into a single acquisition through engineered point spread functions, but conventional and deep optics approaches are subject to degradation in scattering tissue. We introduce DeepFilters, a scattering-aware deep optics framework that jointly optimizes a parameterized pupil filter and a digital-filter-based reconstruction network through a calibrated differentiable forward model to achieve broad generalization without retraining. Incorporating empirical scattering kernels, physics-guided regularization, and a hybrid genetic-gradient initialization strategy, DeepFilters extends the PSF from 16 micron to >400 micron in clear media and enables signal recovery beyond 120 micron deep in biological tissues, validated across fixed brain slices and sea urchin embryos.
Read the full abstract

All authors Joseph L. Greene, Suet YIng Chan, Qilin Deng, Jeffrey Alido, Alexandra Lion, Guorong Hu, Ruipeng Guo, Tongyu Li, Kivilcim Kiliç, Ian Davison, Lei Tian

Materials Science

OpenAaaS: An Open Agent-as-a-Service Framework for Distributed Materials-Informatics Research

The Materials Genome Initiative catalyzed the proliferation of centralized platforms–SaaS, PaaS, and IaaS–that aggregate computational and experimental resources for accelerated materials discovery. In parallel, breakthroughs in large language models (LLMs) and autonomous agents have created powerful new reasoning capabilities for scientific research. Yet a critical "last mile" problem remains: while we possess world-class models and vast repositories of materials data, we lack the organizational infrastructure to compose these capabilities securely across institutional boundaries. The development of structural and functional materials for harsh service environments–high-temperature alloys, radiation resistant steels, corrosion-resistant coatings–remains characterized by long-term iteration, mechanistic complexity, and high domain expertise–demands that exceed both monolithic agent systems and traditional centralized platforms. To address this gap we propose OpenAaaS, an open-source hierarchical and distributed Agent-as-a-Service framework that enables organized multi-agent collaboration for intelligent materials design. OpenAaaS is built on a single foundational principle: code flows, data stays still. A Master Agent plans and decomposes complex research tasks without requiring direct access to subordinate agents' managed data and computational resources. Sub-agents, deployed as near-data execution nodes, retain full sovereignty over local datasets, proprietary algorithms, and specialized hardware. This architecture guarantees that raw data never leaves its domain of origin while enabling cross-scale, cross-domain secure integration of previously isolated materials intelligence silos. We validate the framework through two representative case studies: (i) AlphaAgent, an evidence-grounded materials literature analysis executor that achieves 4.66/5.0 on deep analytical questions against single-pass RAG baselines; and (ii) an ultra-large-scale hexa-high-entropy alloy descriptor database service that demonstrates secure near-data execution and domain-specific scientific workflows under strict data-sovereignty constraints. OpenAaaS establishes a principled pathway toward "organized research" via agent collectives, offering a scalable foundation for next-generation materials intelligent design platforms. All source code is available at https://github.com/Wolido/OpenAaaS.
Read the full abstract

All authors Peng Kang, Bixuan Li, Xiaoya Huang, Shuo Shi, Weiqiao Zhou, Zhen Li, Yu Liu, Lei Zheng

High Energy Physics (Experiment)

Search for pair production of additional neutral scalars within the Inert Doublet Model in a final state with two electrons or two muons in proton-proton collisions at $\sqrt{s}$ = 13 TeV and 13.6 TeV

A first dedicated search for pair production of new scalars predicted by the Inert Doublet Model is performed using proton-proton collisions. Data were collected with the CMS detector at the CERN LHC at $\sqrt{s}$ = 13 TeV and 13.6 TeV, corresponding to integrated luminosities of 138 fb$^{-1}$ and 35 fb$^{-1}$, respectively. Within this model, four additional scalar bosons (H, A, H$^+$, and H$^-$) are predicted. Through an additional discrete symmetry, the lightest new scalar, H, is stable, rendering it a viable dark matter candidate. These candidates can originate from quark-antiquark annihilation producing an offshell Z boson that decays to a pair of the new scalars. The target final state consists of exactly two opposite-charge same-flavour leptons (electrons or muons), with missing transverse momentum due to the stable neutral scalars, and very little hadronic activity. A parameterised neural network is used to separate the signal from the standard model background. No significant excess of events is observed. Exclusion limits at 95% confidence level are set on the production cross section of the two new neutral scalars, H and A, expressed in terms of their masses, $m_\mathrm{H}$ and $m_\mathrm{A}$, in the $m_\mathrm{H}$ vs. $m_\mathrm{A} - m_\mathrm{H}$ plane. The observed (expected) exclusion region reaches $m_\mathrm{H}$ = 108 (106) GeV for $m_\mathrm{A} - m_\mathrm{H}$ = 78 (76) GeV and at $m_\mathrm{H}$ = 70 GeV, covers the range of $m_\mathrm{A} - m_\mathrm{H}$ = 40$-$90 (35$-$90) GeV.
Read the full abstract

Disordered Systems and Neural Networks · Cross-listed from cs.LG

Deep Learning as Neural Low-Degree Filtering: A Spectral Theory of Hierarchical Feature Learning

Understanding how deep neural networks learn useful internal representations from data remains a central open problem in the theory of deep learning. We introduce Neural Low-Degree Filtering (Neural LoFi), a stylized limit of gradient-based training in which hierarchical feature learning becomes an explicit iterative spectral procedure. In this limit, the dynamics at each layer decouple: given the current representation, the next layer selects directions with maximal accessible low-degree correlation to the label. This yields a tractable surrogate mechanism for deep learning, together with a natural kernel-space interpretation. Neural LoFi provides a mathematically explicit framework for studying multi-layer feature learning beyond the lazy regime. It predicts how representations are selected layer by layer, explains how emergence of concepts arises with given sample complexity, and gives a concrete mechanism by which depth progressively constructs new features from old ones through low-degree compositionality. We complement the theory with mechanistic experiments on fully connected and convolutional architectures, showing that Neural LoFi improves over lazy random-feature baselines, recovers meaningful structured filters, and predicts representations aligned with early gradient-descent feature discovery with real datasets.
Read the full abstract

All authors Yatin Dandi, Matteo Vilucchio, Luca Arnaboldi, Hugo Tabanelli, Florent Krzakala

Materials Science

Magnetocaloric Effect in Nanostructured $La_{0.6}Sr_{0.4}Fe_{1-x}Co_{x}O_3$

This work presents a systematic study of the magnetocaloric effect in the nanostructured perovskite series $La_{0.6}Sr_{0.4}Fe_{1-x}Co_{x}O_3$ (x = 0, 0.2, 0.5, 0.8, and 1.0), synthesized by a pore-wetting method using polymeric membranes with pore diameters of 200 nm and 800 nm. All samples were calcined at 1000{\deg}C. Structural characterization was made by X-ray diffraction and confirmed the formation of a single-phase perovskite with distorted rhombohedral symmetry, without detectable secondary phases. We observed significant influence of substitution of Fe by Co on the morphology, as the analysis by scanning electron microscopy revealed a clear evolution from smaller to larger particles and from thin to thicker nanotubes, as the Co content increased. Magnetic measurements showed that the cationic substitution enhances ferromagnetic coupling, increasing both the saturation magnetization (MS) and the Curie temperature (TC). The magnetocaloric properties, determined through the Maxwell relations, exhibit a maximum entropy change of 1.13 J/(kg K) under an applied field of 3 T for the sample with x = 1. These results demonstrate that the combination of Co doping and controlled nanostructuring effectively optimizes the magnetocaloric response.
Read the full abstract

Mathematical Physics

Volumetric Growth in Linear Elasticity Driven by an Optimality Criterion

Using linearized elasticity as a convenient mechanical framework, we show that volumetric growth can be formulated as an optimization-driven process in which the growth tensor is determined implicitly by constrained optimization rather than prescribed through phenomenological evolution laws. At each incremental step, the displacement and growth fields satisfy equilibrium, mass-balance constraints, and an irreversibility condition enforcing accretive growth, while an objective functional encodes the driving mechanism of the process. Finite element discretization leads to a finite-dimensional constrained minimization problem in the growth variables alone and makes explicit the interpretation of the evolution as a projected gradient flow. Numerical examples illustrate the proposed framework.
Read the full abstract

Strongly Correlated Electrons

Lieb-Schultz-Mattis theorem from gauge constraints

We construct a $\mathbb{Z}_2 \times \mathbb{Z}_2$ gauge theory coupled to matter on a one-dimensional chain, aiming to study the ground-state physics in the Gauss law subspace. We show that the theory in the Gauss law subspace has a U$(1)$ symmetry whose generator commutes with lattice translations, but anticommutes with the lattice reflection operator. This leads to a Lieb-Schultz-Mattis (LSM) theorem that always rules out a trivial gapped ground state in the Gauss law subspace, if the hamiltonian is invariant under translations and reflection. Any point in the parameter space must realize either a spontaneously symmetry broken (SSB) ground state, or a gapless ground state. Imposing the Gauss law is pivotal for the existence of the U$(1)$ symmetry, and hence of the LSM theorem. We thus demonstrate a novel mechanism to obtain an LSM-type theorem, wherein the symmetry responsible for the theorem originates from the kinematic constraints of a gauge theory. We identify a point in the parameter space at which the system is gapless. At the gapless point, the excitations admit a description in terms of free Dirac fermions with a constraint on the total fermion number. The asymptotic behavior of the two-point correlation function of the simplest local gauge-invariant quantity at the gapless point is found to be $ \propto \cos{(\pi r)}\,r^{-2/9}$, where $r$ is the lattice separation between the two points. This model is also a natural platform to study phase diagram topological defects residing in families of SSB phases.
Read the full abstract

Instrumentation and Methods for Astrophysics

DEFROST: Detecting Excess in Faraday Rotation thrOugh Sophisticated analysis Techniques

Understanding origin and evolution of cosmological magnetic fields requires knowledge of magnetic fields in different extragalactic environments. In this context, a powerful tool is the statistical analysis of the Faraday effect on the linear polarization of a sample of radio sources. This effect carries information about the magnetic fields in our Galaxy, extragalactic environments between the sources and the observer, and within the emitting radio source itself. An accurate disentangling of all these components is crucial to characterize magnetic fields in the LSS of the Universe. The significant amount of data delivered by new radio instruments enables the investigation of increasingly weak magnetic fields. However, a trustworthy characterization is only possible with advanced analysis techniques. In this work, we present a new algorithm capable of simultaneously disentangling the Faraday effect due to our Galaxy from extragalactic contributions, by properly taking into account the observing noise. The algorithm takes as an input a catalog of RM complemented by auxiliary information as, e.g., the redshift. We tested the algorithm with synthetic data to assess its performance and identify the range of Galactic magnetic field power spectrum slopes that allows us to properly disentangle Galactic and extragalactic terms. Furthermore, we tested the algorithm with synthetic catalogs, based on m- and cm-data currently available, corresponding to different observing setups, noise, and cuts in the absolute value of the Galactic latitude of the radio sources. Considering noise values and density of polarized sources consistent with existing catalogs, we demonstrated that the most robust results are obtained with sources with absolute Galactic latitude > 45deg, with inference of the extragalactic parameters at most within 5sigma, both for dispersion in Faraday rotation of ~1 and 10rad/m2.
Read the full abstract

All authors Valentina Vacca, Sebastian Hutschenreuter, Andrea Cabriolu, Torsten A. Ensslin, Jakob Roth, Martin Reineke, Philipp Frank, Federica Govoni, Matteo Murgia, Gianni Fenu

Mathematical Physics

Surface Growth Driven by an Optimality Criterion

We propose a variational framework for accretive surface growth driven by an optimality principle. Rather than prescribing a kinetic law, the configuration at each time step is obtained, within a time-discrete setting, as the solution of a constrained minimization problem. Growth is modeled as an irreversible surface deposition process subject to a global mass constraint, while the driving mechanism is encoded in an objective functional, here taken to be the structural mean compliance. The approach is illustrated on a linearly elastic cantilever beam whose cross-sectional height evolves through layered accretion, possibly involving prestrain and precurvature. Growth-induced residual stresses can alter the convexity of the compliance functional, leading to nonuniqueness and localization phenomena. We explore the possibility of adding a regularization term penalizing deviations from the previous-step configuration. Finally, through a formal limiting procedure, we derive from the time-discrete formulation a time-continuous limit in the form of a constrained gradient flow.
Read the full abstract

Optics

Adaptive time-domain simulation of optical cavities with arbitrary dynamics

We present a fast time-domain simulator for optical cavities capable of reproducing non-linear dynamical regimes arising from ring-down effect during resonance crossings at high mirror velocities. The model is based on a recursive formulation of the intracavity electric field as a sum over round trips, preserving the cavity memory while maintaining high computational efficiency. The simulator is designed to achieve three main goals. First, the boundary conditions of the cavity can be modified at each simulation step, allowing arbitrary time-dependent variations of both mirror positions and input electric field. Second, the sampling frequency can be flexibly chosen by the user, however, it is internally adjusted before effectively executing the simulation to remain consistent with the cavity round-trip structure. Finally, high computational efficiency was obtained by avoiding the repeated evaluation of the full electric field history. The framework is validated through comparison with experimental data from the Virgo interferometer during a mechanical excitation experiment, showing good agreement in non-adiabatic regimes. Due to its efficiency and flexibility, the simulator provides a versatile tool for time-domain studies of optical resonators and future applications in real-time control and reinforcement-learning-based lock acquisition.
Read the full abstract

All authors A. Svizzeretto, J. Casanueva Diaz, B. L. Swinkels, M. Bawaj

Geophysics

Assessing foundational atomistic models for iron alloys under Earth's core conditions

We assess the capability of recently developed foundational atomistic models (FAMs) to simulate iron alloys under the extreme pressures and temperatures of Earth's core. Static equations of state for hexagonal close-packed (hcp) and body-centered cubic (bcc) iron, computed using 17 FAMs, are benchmarked against ab initio calculations. Two representative models, MatterSim and MACE, are further evaluated for their ability to reproduce phonon spectra, liquid structure, and melting relations of iron at core conditions. While both models capture several key properties, MACE substantially overestimates the stability of bcc iron and fails to correctly describe the stability of hcp iron. Their performance is also examined for binary liquids, superionic phases, and a seven-component Fe-Ni-Si-S-O-H-C liquid. Although these FAMs were not explicitly trained on data from core conditions, they can reproduce several structural and dynamical properties across a wide range of compositions. However, none of the tested models consistently reproduces all first-principles benchmarks. By analyzing the origins of these discrepancies, we identify several limitations of current FAMs, particularly the lack of an explicit treatment of thermal electronic excitations, which significantly affect phase stability and thermodynamic properties under core conditions. We further discuss directions for improving FAMs to enable predictive simulations of core-forming materials under extreme conditions.
Read the full abstract

All authors Tianqi Wan, Liangrui Wei, Zepeng Wu, Renata M. Wentzcovitch, Yang Sun

High Energy Astrophysical Phenomena

On the Apparent Correlation between X-ray and Neutrino Luminosities of Active Galactic Nuclei

Recent studies have reported a linear correlation between the hard X-ray and high-energy neutrino luminosities of active galactic nuclei (AGN), suggesting a possible physical connection between these two messengers. In this work, we challenge this interpretation by demonstrating that the observed correlation may arise purely from selection effects. We analyze 10 years of IceCube public data for a sample of Seyfert galaxies and blazars from the Swift BAT catalog. While our data reproduces the apparent $L_\nu$–$L_X$ correlation for sources with mild (but not significant) neutrino evidence, we show through Monte Carlo simulations that the same correlation appears even when analyzing random sky positions with no astrophysical sources. The key issue is that TS-based source selection effectively restricts the neutrino flux to a narrow range (a factor of several), while the luminosity distance of the sample spans $\sim4$ orders of magnitude. This causes the luminosity $L = 4\pi D_L^2 F$ to be dominated by the distance term rather than intrinsic flux variations, creating an artificial correlation. While a robust flux correlation ($F_\nu$–$F_X$) for high-significance sources may indicate a genuine physical link, our results demonstrate that a luminosity-luminosity correlation alone is insufficient to establish a physical relationship between neutrino and X-ray emission in AGN.
Read the full abstract

Optics

Ghost State of Light

We report the observation of a long-lived non-stationary state of light in a single-mode optical cavity. The observed state is a ghost of a saddle-node bifurcation which creates a bottleneck in phase space. While such ghosts are known to exist, accessing them is challenging because it requires a mechanism that steers the relaxation pathway away from the true attractor and into the bottleneck where the ghost emerges. Here we identify such a mechanism, namely a nonlinear response with memory. Our experimental system leverages this mechanism, enabling us to observe ghost states with lifetimes exceeding the cavity photon lifetime by more than ten orders of magnitude, even in the presence of strong fluctuations. The ghost manifests as a plateau in the relaxation dynamics of the cavity transmission, reminiscent of prethermalization. We show how the ghost lifetime depends on the memory time and the distance to the bifurcation, and we observe signatures of scaling in the distribution of ghost lifetimes at fixed driving conditions. Our work establishes minimal conditions for realizing parametrically long-lived non-stationary states.
Read the full abstract

All authors R. M. de Boer, C. Toebes, Jan Klars, S. R. K. Rodriguez

Materials Science

Anisotropic Dopant and Strain Architectures in WS$_2$ Nanocrystals Driven by Growth Kinetics

Dopant distribution in two-dimensional semiconductors is typically assumed to be stochastic, limiting deterministic defect engineering. Here, we show that non-equilibrium growth kinetics can be harnessed to define dopant-driven strain architectures in vanadium-doped WS$_2$ monolayers. Using synchrotron X-ray fluorescence, we identify preferential vanadium incorporation, anti-correlated with tungsten content, along crystallographic bisectors. An adsorption-growth-diffusion model with a single kinetic parameter quantitatively captures the dopant segregation arising from preferential corner adsorption and limited diffusion during chemical vapor deposition growth. Hyperspectral Raman imaging demonstrates mechanically induced vibrational responses, revealing localized tensile strain ($\varepsilon \approx0.70\%$) channels associated with the anisotropic dopant distribution. This regime is marked by the depletion of W-site-sensitive in-plane modes and the emergence of a localized $J2$ mode (210~cm$^{-1}$), which our ab-initio calculations attribute to antiphase V$-$V oscillations. These findings establish kinetic segregation as a route to deterministic chemical and strain architectures in 2D semiconductors, enabling programmable defect landscapes and strain engineering during synthesis.
Read the full abstract

All authors Frederico B. Sousa, Raphaela de Oliveira, Matheus J. S. Matos, Elizabeth Grace Houser, Igor Ferreira Curvelo, Zhuohang Yu, Mingzu Liu, Felipe Menescal, Gilmar Eugenio Marques, Leandro M. Malard, Mauricio Terrones, Bruno R. Carvalho, Helio Chacham, Marcio D. Teodoro

High Energy Physics (Theory)

Semiclassical algebraic reconstruction for type III algebras

In this work, we address the unresolved type III cases of the algebraic reconstruction theorem by integrating crossed product algebras and semiclassical approximations. We first derive that the relative entropy in crossed product algebras factorizes into contributions from the original algebra and observer wavefunctions. By constructing “holographic” crossed product algebras for “bulk” and “boundary” type III factors, we extend the algebraic reconstruction theorem to include the algebraic Ryu-Takayanagi (RT) formula semiclassically, which provides a complete algebraic description of the reconstruction theorem, as an intrinsic framework for the algebraic version of bulk-boundary correspondences in holographic duality.
Read the full abstract

Mathematical Physics · Cross-listed from math.DG

Determinantal point processes associated with the Bochner-Schrödinger operator

We consider the Bochner-Schrödinger operator $H_{p}=\frac 1p\Delta^{L^p}+V$ on tensor powers $L^p$ of a Hermitian line bundle $L$ on a Riemannian manifold $X$ of bounded geometry under the assumption of non-degeneracy of the curvature form of $L$. For large $p$, the spectrum of $H_p$ asymptotically coincides with the union $\Sigma$ of all local Landau levels of the operator at the points of $X$. We study the determinantal point process on $X$ associated with the spectral projection of $H_p$ corresponding to an interval $I=(\alpha,\beta)$ such that $\alpha,\beta\not \in \Sigma$ and compute the asymptotics of its linear statistics as $p$ goes to infinity. When $X$ is compact, this implies the law of large numbers and central limit theorem for the corresponding empirical measures.
Read the full abstract

Superconductivity

Singular spin fluctuations in the strange-metal phase of La2-xSrxCuO4

Although spin fluctuations are central to the physics of high-Tc cuprates, their relevance to strange-metal behavior in the overdoped regime remains unclear. Here, we use high magnetic fields to suppress superconductivity and an NMR protocol tailored to electronic inhomogeneity to show that the low-energy limit of the dynamical spin susceptibility \chi”(q,omega) at x=0.25 in La2-xSrxCuO4 increases continuously down to our lowest temperatures. This behavior is suggestive of quantum-critical fluctuations, a leading candidate mechanism for strange-metal transport, yet is observed well beyond the spin-stripe critical doping x=0.19. Our data further reveal that the spin dynamics are spatially inhomogeneous, suggesting that nanoscale electronic inhomogeneity may underlie this apparent paradox. These observations provide new insight into the electronic state from which strange-metal behavior emerges.
Read the full abstract

All authors B. Costarella, L. Soriano, I. Vinograd, H. Mayaffre, S. Li, J. Yang, J. Luo, R. Zhou, G. Gu, J. M. Tranquada, M.-H. Julien

Instrumentation and Detectors

Upgrade of the Belle II Vertex Detector with Depleted Monolithic CMOS Active Pixel Sensors

The Belle II experiment, operating at the asymmetric SuperKEKB $e^+e^-$ collider, is preparing an upgrade of its vertex detector to cope with an increased luminosity of $6 \times 10^{35}$ cm$^{-2}$s$^{-1}$. The upgraded vertex detector (VTX) will consist of five or six layers of depleted monolithic active pixel sensors (DMAPS), with a total material budget of approximately $3\%$ $X/X_0$. The OBELIX chip, derived from the TJ-Monopix2 sensor and fabricated using Tower-Jazz Semiconductor 180 nm CMOS technology, is being developed for this upgrade. It features a 33 $\mu$m pixel pitch with a time-stamping binning of $50-100$ ns, along with a dedicated digital periphery compatible with the Belle II trigger system, supporting rates up to 30 kHz. The sensor is designed to operate under the high background conditions expected at the target luminosity, with radiation tolerance up to $5 \times 10^{14}$ $n_{eq}$/cm$^2$ and 100 Mrad, while targeting a power density of about 200 mW/cm$^2$. This corresponds to hit rates up to 120 MHz/cm$^2$. Beam test and irradiation studies of TJ-Monopix2 demonstrate that the operating sensor temperature should stay below $40^\circ$C after irradiation up to $5 \times 10^{14}$ $n_{eq}$/cm$^2$. This report reviews the proposed VTX concept, sensor performance, and ongoing R$\&$D activities.
Read the full abstract

Mesoscale and Nanoscale Physics

Cryogenic microwave frequency combs based on quantum paraelectric superconducting resonators

A frequency comb, known for its precision as an "optical ruler", features an evenly spaced spectral pattern. While these combs are vital in photonic quantum technologies, their microwave counterparts are now highly sought after for cryogenic quantum technologies, including semiconducting and superconducting qubits and quantum electrical metrology, which mainly operate in the microwave regime. However, microwave combs are still largely underexplored, and typically rely on complex, high-power optical systems incompatible with the low-power, cryogenic on-chip quantum technologies. In this manuscript, we present an all-electrical, on-chip, cryogenic microwave frequency comb on Strontium Titanate (SrTiO$_3$), exploiting its Pockels-like effect in its quantum paraelectric phase. Our device, utilizing a superconducting microwave cavity, generating the frequency comb via cavity phase modulation enabled by the field-induced effective $\chi(2)$ of SrTiO$_3$. The ability to continuously vary the dielectric constant of SrTiO$_3$ by the application of electric field, in its quantum paraelectric phase, makes it possible to control the comb's operating frequency range. The exceptionally high dielectric constant of SrTiO$_3$, > 20,000 in its quantum paraelectric state, enables an ultra-miniature design and on-chip integration with cryogenic quantum technologies.
Read the full abstract

Nuclear Experiment

Exclusive dimuon production and coherent charmonium photoproduction at forward rapidity in ultra-peripheral Pb$-$Pb collisions at $\mathbf{\sqrt{s_{\rm NN}}=5.36}$ TeV

This Paper presents rapidity-differential measurements of coherent J/$\psi$ and $\psi({\rm 2S})$ photoproduction, as well as rapidity- and mass-differential measurements of exclusive dimuon production, in the forward rapidity region $-4 < y < -2.5$ in ultra-peripheral Pb$-$Pb collisions at $\sqrt{s_{\rm NN}}=5.36$ TeV using data recorded by the ALICE detector at the LHC in 2023, corresponding to an integrated luminosity of $\mathcal{L} = 1170 \pm 50~\mu{\rm b}^{-1}$. The J/$\psi$ and $\psi({\rm 2S})$ results reveal the significant role of nuclear shadowing effects. The square root of the ratio of the measured quarkonium cross section to the impulse approximation prediction is about 0.76 for J/$\psi$ and 0.71 for $\psi({\rm 2S})$, at $y \approx -3$, corresponding to typical Bjorken-$x$ values of $10^{-2}$. The exclusive dimuon results highlight the sensitivity of such measurements to precise modeling of the photon flux, particularly at impact parameters near the nuclear radius.
Read the full abstract

Statistical Mechanics

Phase Ordering in a few O(n) Symmetric Models: Slow Growth, Mpemba Effect and Experimental Relevance

We study phase ordering dynamics in the three-dimensional nonconserved XY model, via Monte Carlo simulations, for quenches from paramagnetic phase to certain final temperatures $T_f$ within the ferromagnetic region of the phase diagram. The growth in the system occurs via annihilation of vortex and anti-vortex pairs, cores of which, in the three dimensional system geometry, join from different planes, on which the spins lie, to form line defects. In the long-time limit, the associated characteristic length scale, $\ell(t)$, appears to grow with time $(t)$ approximately as $t^{0.15}$, for $T_f=0$. The exponent is much smaller, like in the zero temperature intermediate time ordering in the three dimensional Ising model, than $1/2$, the expected value, that is realized for quenches to $T_f$ value that is sufficiently larger than zero. We carry out quenches from different starting temperatures, $T_s$, that lie above the critical temperature $T_c$. It is observed that the systems with higher $T_s$ approach the final equilibrium faster. This resembles the puzzling Mpemba effect. We present similar results also from the simulations of the two- and three- dimensional Ising model. In the case of the 2D Ising model, we show that the Mpemba effect is observed only if the starting magnetization is restricted to a value close to zero. In $d=3$, on the other hand, for both the models, the effect appears even if the initial configurations at a given $T_s$ are chosen from the full distribution of magnetization. Thus, our results are of much experimental relevance.
Read the full abstract

All authors Wasim Akram, Nalina Vadakkayil, Sohini Chatterjee, Subir K. Das

Mesoscale and Nanoscale Physics

Probing Floquet topological phases via non-Hermitian skin effect of reflected waves

Periodically driven systems host topological phases without static analogs, such as the anomalous Floquet phase characterized by trivial bulk bands yet robust boundary modes. In this work, we investigate the scattering problem of a Floquet Chern insulator and reveal the non-Hermitian skin effect (NHSE) of reflected waves. Using a discrete-time scattering formalism, we demonstrate how the non-Hermitian winding number of the reflection matrix is linked to the bulk Floquet invariant via boundary resonances. This reflected-wave NHSE relies on which quasienergy gap the incident wave resides in, leading to a gap-dependent Goos-Hänchen (GH) shift. We further show that the momentum-integrated GH shift quantitatively yields the Floquet topological invariant of the corresponding gap. Our work highlights a frequency-dependent NHSE of reflected waves in driven systems and provides a real-space scattering approach to identify non-equilibrium topology.
Read the full abstract

Soft Condensed Matter

Metastable Hyperuniformity at Discontinuous Absorbing Transitions

Nonequilibrium hyperuniformity can arise either as a steady-state property of driven active fluids or as a critical signature at continuous absorbing transition points in two and three dimensions. Whether analogous structural order exists near discontinuous absorbing transitions, and what mechanism generates it, remains unclear. Here, we show that discontinuous absorbing transitions generically host a metastable hyperuniform regime near the stability limit. Using a facilitated Manna model without center-of-mass conservation, we find anomalous scaling $S(k\to0)\sim k^{1.2}$, which appears only near the metastable regime and disappears both deep in the active phase and in the absorbing phase. This scaling is robust in both two and three dimensions, in contrast to critical hyperuniformity at continuous absorbing transitions. We further formulate a minimal conserved Reggeon field theory that reproduces the same metastable hyperuniform regime and anomalous scaling, demonstrating that the phenomenon does not rely on microscopic update rules but arises from the interplay of nonlinear activation, multiplicative demographic noise, and conserved diffusive fluctuations. These results identify metastable hyperuniformity as a generic pseudo-critical structural signature of discontinuous absorbing transitions coupled to a conserved density.
Read the full abstract

Materials Science

Correlation-driven tunability of altermagnetism in RuO$_2$

RuO$_2$ has been regarded as a prototypical candidate for metallic altermagnet, offering a potential platform for high-speed and high-efficiency spintronics. However, the magnetic ground state of RuO$_2$ remains a topic of active debate due to conflicting experimental reports. In this work, we investigate the effect of electron correlations in RuO$_2$ using density functional theory combined with dynamical mean-field theory (DFT+DMFT). In contrast to previous DFT-based studies, DFT+DMFT captures essential dynamical correlation effects, yielding spectral functions and optical conductivities in excellent quantitative agreement with experiments, and further reveals that RuO$_2$ resides in the close vicinity of both the paramagnetic-altermagnetic phase boundary and the itinerant-localized crossover, rendering the magnetic ground state highly susceptible to external perturbations. Indeed, even a minimal compressive strain of $\sim$0.5% is sufficient to drive the system into an altermagnetic phase. These findings elucidate the origin of the conflicting experimental observations and reveal that dynamical correlation effects are the key driving force behind the highly tunable magnetic ground state of RuO$_2$.
Read the full abstract

All authors Ina Park, Dongwook Kim, Inho Lee, Jisook Hong, Beomjoon Goh, Bo Gyu Jang