High Energy Astrophysical Phenomena
Papers
Fresh from arXiv, typeset properly. Highlighted words trade on the market.
Wednesday 13 May
We present a broadband spectral and timing study of the black hole candidate MAXI J1803-298 during its 2021 outburst using simultaneous observations from NICER, NuSTAR, and Insight-HXMT. The combined multi-instrument coverage allows us to investigate the evolution of low-frequency quasi-periodic oscillations (LFQPOs) together with the spectral properties of the source over a wide energy range. During the early observation epoch, the source exhibits a hard or hard-intermediate spectral state dominated by Comptonized emission with reflection features. Spectral modeling within the framework of the two-component advective flow (TCAF) model indicates the presence of a sub-Keplerian halo and a Keplerian disk with a shock located at 130 Schwarzschild radii, and provides an independent estimate of the black hole mass. A prominent LFQPO is detected during this epoch with a centroid frequency evolving from 0.35 Hz to 0.5 Hz and extending up to 100 keV. The energy-dependent fractional rms variability suggests that the modulation originates primarily from the Comptonizing inner accretion flow. In contrast, a later observation epoch shows a softer spectral state characterized by stronger disk emission and a steeper photon index, during which no LFQPO is detected. We also demonstrate that cospectral analysis effectively mitigates dead-time-induced distortions in NuSTAR timing studies, confirming the intrinsic nature of the detected variability. The combined spectral and timing results support a scenario in which LFQPOs in MAXI J1803-298 arise from the dynamically evolving inner accretion flow.
Astrophysics of Galaxies
Survival of Molecular Complexity under Recent Supernova Feedback: Detection of Hot Cores in RX J1713.7-3946
Protostellar cores located near supernova remnants are considered potential analogues of the birth environment of the solar system. However, the extent to which supernovae influence their chemical evolution remains unclear. We report the first detection of hot molecular cores in a supernova remnant using the Atacama Large Millimeter/submillimeter Array. The detected hot cores (HC1 and HC2) are located inside the X-ray shell of the young supernova remnant RX J1713.7-3946, and both sources are associated with Class I intermediate-mass protostars. This paper focuses on a detailed chemical analysis of HC1, in which a variety of carbon-, oxygen-, nitrogen-, sulfur-, and silicon-bearing species are detected. Excitation analyses indicate that HC1 harbors dense (~10^7 cm-3), compact (<500 au), and high-temperature (>100K) molecular gas. Despite being located within a supernova-feedback region, the column density ratios of complex organic molecules (HCOOCH3/CH3OH, CH3OCH3/CH3OH, and CH3CHO/CH3OH), a deuterated molecule (CH2DOH/CH3OH), and sulfur- and nitrogen-bearing species (OCS/CH3OH and C2H5CN/CH3CN) in HC1 are indistinguishable from those observed in hot cores/corinos in more typical star-forming environments. HC1 is located near the outer edge of the supernova shell, and the surrounding region has likely begun to be exposed to such a harsh environment only recently. The elapsed time since the onset of exposure to high-energy particles and photons may be too short for the chemical composition of the hot core to be significantly altered, and/or the hot-core region may be shielded by magnetic fields amplified by supernova feedback, which could suppress the penetration of enhanced cosmic rays.
Read the full abstract
Materials Science
Conditional probability density functional theory for solids
The recently developed conditional probability density functional theory (CP-DFT) yields direct access to the exchange-correlation hole of a system, an important correlation function that is not available in standard DFT. We present the first results for extended materials with periodic boundary conditions. We validate CP-DFT for weakly correlated Na and Si. We apply it to a stretched hydrogen chain, the prototype of strong correlation. When applied to the Kagome material CsV$_3$Sb$_5$, we find $d$-orbital correlations that are missing in standard DFT, implying an enhanced finding probability between two separated electrons and a local charge density wave related modulation.
Read the full abstract
Optics
On-chip 1 TOPS Hyperdimensional Photonic Tensor Core using a WDM Silicon Photonic Coherent Crossbar
We demonstrate an on-chip 0.96 TOPS hyperdimensional photonic tensor core by utilizing a time-spacewavelength multiplexed silicon photonic Crossbar (Xbar). The novel architecture relies on serializing the large matrix-vector or tensor-vector products by unfolding multiply and accumulation operations over time domain, while simultaneously distributing the computational workload over different spatial and wavelength channels. We experimentally demonstrate the operation of a 4-channel 2-input TSWDM Xbar that incorporates 56 GHz electroabsorption modulators (EAMs) and 4-channel integrated multiplexing stages. Its successful operation as a 4x2x1 tensorvector multiplication unit demonstrated an average error of 3.9%. Its performance as a photonic AI accelerator was also evaluated in the classification task of the Iris dataset, presenting experimental accuracies of 93.3% at data rates between 4x10 and 4x30 GBd, reaching 83.3% when the data rate increases to 4x60 GBd. Finally, we discuss the TSWDM Xbar scalability potential, revealing that the inclusion of a WDM scheme in the SDM architecture reduces the operating laser power, feasibly boosting the potential of constructing photonic accelerators with computational throughput in the POPS regime.
Read the full abstract
Astrophysics of Galaxies
Comparative analysis of missing data imputation methods for CSST survey: Impact on photometric redshift estimation performance
Improving the accuracy of photometric redshifts (photo-$z$) is essential for reliable statistical studies of cosmology and galaxy evolution. However, missing photometric bands are a common observational challenge that can significantly degrade photo-$z$ estimation accuracy. In this work, we present a systematic evaluation of data imputation methods aimed at improving photo-$z$ performance. We benchmark a range of representative machine learning (ML) and deep learning (DL) architectures, identifying k-nearest neighbors (KNN) and the attention-based SAITS model as the leading performers. These models are then applied to China Space Station Survey Telescope (CSST) mock data to assess their performance under realistic observational conditions. Our results show that KNN yields the highest accuracy under idealized missing completely at random (MCAR) conditions with complete training sets, whereas robustness tests reveal that SAITS significantly outperforms KNN when training data is incomplete or when applied to realistic mixed-mechanism scenarios. We find that domain consistency between training and testing missingness patterns is a prerequisite for optimal performance, highlighting the risks of domain shift in supervised regression tasks. Furthermore, our analysis demonstrates that while general imputation models are highly effective for MCAR and missing at random (MAR) data, they are detrimental when applied to missing not at random (MNAR) data arising from flux limits, as statistical models fail to capture the physical information inherent in these non-detections. Consequently, we advocate for more sophisticated architectures capable of disentangling stochastic missingness from physical non-detections to address these distinct mechanisms individually.
Read the full abstract
Instrumentation and Detectors
Stable Charge Collection and Sub-45 ps Time Resolution in a 4H-SiC PIN Detector Irradiated With Low Fluence 16.5 MeV/u Ta Ions
A silicon carbide PIN detector was fabricated and its radiation tolerance under Ta heavy ion irradiation of 2370 MeV was evaluated. Its electrical properties, charge collection performance and time resolution of $\beta$-particles ($^{90}$Sr) are reported. The leakage currents for unirradiated and irradiated 4H-SiC PIN detectors are $1.47 \times 10^{-10}$~A @ 300 V and 1.49~$\times$ 10$^{-10}$A@ 300 V. The effective doping concentrations for unirradiated and irradiated 4H-SiC PIN detectors are $6.23\times 10^{13}$~cm$^{-3}$ and $6.13\times 10^{13}$~cm$^{-3}$. The irradiated detector exhibits good electrical performance and stable device architecture. The 4H-SiC PIN detector exhibits a charge collection efficiency (CCE) of 99.24% under Ta Heavy Ion Irradiation. The time resolutions of the detector before and after irradiation are 40 ps and 45 ps, respectively. Experimental results indicate that the CCE and time resolution performance exhibit good stability before and after irradiation. These results demonstrate stable performance under Ta heavy ion irradiation, highlighting the detectors potential for radiation-hard applications in high-energy physics, space missions, and nuclear reactor monitoring.
Read the full abstract
Nuclear Experiment
First investigation of $^{96}$Zr samples enriched by the gas-centrifuge method for the use in rare-decay studies
For the first time, the isotope $^{96}$Zr has been produced by the gas-centrifuge method (enrichment is 88.28% and full mass of $^{96}$Zr is 179.816 g). The level of radionuclide impurities of the samples and thus their suitability for rare-event search have been investigated using three low-background HPGe detectors. The most stringent limit, obtained at sea level, on the half-life of the double beta decay of $^{96}$Zr to the $0^+_1$ excited state (1148 keV) of $^{96}$Mo has been set $T_{1/2}(0\nu+2\nu)>3.9 \times 10^{19}$ yr (90% C.L.).
Read the full abstract
Solar and Stellar Astrophysics
Diversity in Evolutionary Status and Magnetic Activity among Solar-Type Twin Detached Eclipsing Binaries
We present a combined photometric and spectroscopic analysis of four detached eclipsing binaries (KIC 8957954, KIC 10593759, KIC 8302455, and TIC 207398432), all of which exhibit composite G-type spectra and nearly equal mass ratios. Based on survey data and our own observations, we measured radial velocities with the broadening function method, applied the fd3 program for spectral disentangling, and modeled the light curves with the Wilson-Devinney code to determine accurate absolute parameters. The results reveal significant differences in evolutionary stages and magnetic activity despite their nearly equal masses. Both components of KIC 8957954 and KIC 8302455 are on the main sequence; KIC 10593759 has evolved to the subgiant stage; and in TIC 207398432, the secondary has entered the red giant phase. Stronger magnetic activity is observed in KIC 10593759 and TIC 207398432, characterized by rapid O'Connell Effect Ratio variations, with the latter also exhibiting multiple superflare events. In addition, the spectral characteristics of TIC 207398432 suggest that it may be part of a hierarchical triple system. This study provides precise absolute parameters for twin binaries and offers important observational evidence for understanding their evolutionary diversity, magnetic activity, and the possible presence of tertiary companions.
Read the full abstract
Mesoscale and Nanoscale Physics
Highly Efficient Exciton Modulation in MoSe$_2$/PdSe$_2$ Heterostructures
Controlling exciton recombination in atomically thin semiconductors is central to their optoelectronic functionality, as the competition between radiative and non-radiative decay channels governs emission efficiency. Existing approaches, such as defect passivation, chemical doping, dielectric engineering, and strain tuning, primarily aim to suppress non-radiative losses. Here, we report a pronounced $\sim$6-fold enhancement of room-temperature A-exciton emission in a type-I MoSe$_2$/PdSe$_2$ van der Waals heterostructure, yielding a photoluminescence quantum yield of 6 %, compared to $\sim$1 % for as-exfoliated monolayer MoSe$_2$. This enhancement is accompanied by strong quenching of the B-exciton, consistent with interlayer electronic coupling that redistributes exciton populations toward the radiative A-exciton channel. Power- and temperature-dependent measurements reveal a suppression of exciton-exciton annihilation and a crossover to quenched emission at low temperature, indicating a redistribution of exciton relaxation pathways. Photoluminescence excitation spectroscopy further reveals a broadband enhancement spanning 450-725 nm, ruling out a resonance-specific mechanism. These results demonstrate that interlayer electronic coupling can be used as an efficient means to redirect exciton populations toward radiative channels, enhancing emission efficiency in two-dimensional semiconductors without chemical modification or strain.
Read the full abstract
Quantum Gases
Observation of an aperiodic polariton monotile
A plethora of unconventional localization phenomena and fractal features of linear spectrum observed in quasiperiodic structures have been accompanied by a long-standing quest for the geometrical elements and structures that permit tilings of the plane, but only in a non-periodic manner. Until 2024, it was believed that such quasiperiodic structures, or quasicrystals, could only be composed of at least two different tiles. Surprisingly, a newly discovered class of quasicrystals requires only one elementary monotile. However, its physical realization and study of propagating coherent excitations in this novel setting remained elusive. Here we optically sculpt aperiodic quasicrystals composed of "einstein" monotiles in an inorganic microcavity and observe nontrivial relative phases of the exciton-polariton condensates nonresonantly excited at the vertices of each monotile. Utilizing energy-resolved tomography in momentum-space, we reveal the formation of distinct Bragg peaks with six-fold symmetry and Dirac-like spectral fingerprints, intrinsic to the underlying graphene-like structure, while interferometric phase reconstruction shows a nontrivial synchronization pattern distinct from both periodic triangular lattices and Penrose quasicrystals. Our work demonstrates that monotiles can be converted into a programmable driven-dissipative artificial material, where long-range coherence coexists with enforced geometric aperiodicity, producing synchronization and spectral responses distinct from both periodic and conventional quasicrystalline tilings.
Read the full abstract
Instrumentation and Detectors
Development of a sub-100 ps Time-of-Flight detector with SiPM-readout scintillator for measurement of cosmic muon velocity
Accurate Time-of-Flight (TOF) measurement with sub-100 picosecond resolution is a critical requirement for particle identification in future high-energy physics experiments, such as the Belle II $K_{L}$ and Muon (KLM) detector upgrade. Achieving this precision with large-area Silicon Photomultipliers (SiPMs) is challenging due to the inherent junction capacitance, which degrades signal rise time. In this work, we developed and evaluated a high-time-resolution cosmic ray detector based on plastic scintillators and customized SiPM arrays. To optimize the readout for block-shaped scintillators, we systematically compared different sensor topologies. We demonstrate that a multi-face readout topology, utilizing low-capacitance 4-series (4S) SiPM modules coupled to four faces of the scintillator, achieves an excellent coincidence time resolution of approximately 68 ps, outperforming the $\sim$100 ps resolution of the concentrated 4-series 3-parallel (4S3P) hybrid topology. Furthermore, to validate the system's practical performance, we successfully measured well-known cosmic ray observables, specifically the relativistic muon velocity via TOF reconstruction. These results highlight the potential of the multi-face 4S configuration as a high-precision solution for future TOF detector upgrades.
Read the full abstract
Biological Physics
Onsager-variational formulation of diffuse-domain methods for computational modeling of microscale fluid-structure interactions
Direct numerical simulation of microscale fluid–structure interactions in multicomponent and multiphase flows requires methods that can represent moving boundaries together with fields constrained to evolving interfaces. Diffuse-domain methods (DDMs) address this geometric difficulty by replacing sharp surfaces with diffuse volumetric representations on regular computational domains. Here we formulate DDMs using Onsager's variational principle. Instead of extending sharp-interface equations and boundary conditions term by term, we embed sharp-surface free-energy and dissipation functionals into the bulk through a diffuse surface delta density and derive the governing equations from the Rayleighian. The framework distinguishes balance-law fields, internal nonconserved order parameters, and kinematic or constitutive rate variables. It also clarifies a key moving-surface distinction: conserved surface densities are transported by the full material surface velocity, whereas explicitly tangential vector and tensor internal variables require projected objective or co-rotational rates within their admissible tangential state spaces. For scalar transport on rigid and deformable interfaces, and for interfacial hydrodynamics near rigid walls, the formulation recovers established DDM models and their sharp-interface limits. The same variational construction yields coupled diffuse-domain models for multicomponent deformable vesicles with surface viscosity, tangential slip, and finite areal compressibility, and for active shells carrying chemical and tangential vector order. These results provide a unified route to thermodynamically consistent passive DDMs for interfacial and surface dynamics, while allowing active stresses through active work power. The framework is relevant to soft matter, microfluidic interfaces, biological membranes, and morphogenetic surface dynamics.
Read the full abstract
Fluid Dynamics
Influence of Prandtl number on heat transfer over a permeable wall
The work considers a fully turbulent flow with heat transfer in a channel half-filled with an array of cubes based on the work of Breugem and Boersma (2005) and Chandesris et al. (2013), at $\mathrm{Re}_\mathrm{bulk} = 5485$ and three different Prandtl numbers, $\mathrm{Pr} = 0.71, 0.1, 0.05$. The temperature is modelled as a passive scalar and two different boundary condition configurations are simulated. The influence of the Prandtl number on the mean temperature, its variance and the terms of the temperature budget is highlighted, including the analysis of the distribution and relative importance of the turbulent heat transfer, molecular diffusion, tortuosity and Brinkman terms near the porous-fluid interface. The latter two has been found to be insignificant for the highest $\mathrm{Pr}$. A set of terms, typically neglected during the upscaling procedure (related to the Taylor expansion of the filtered variables), is analysed for the first time for the turbulent heat transfer at the porous-fluid interface, and are found to be significant at low $\mathrm{Pr}$. The upscaled fields are evaluated with three different kernels forming cellular average, linear (i.e., tent kernel), quadratic and cubic, and the influence of the chosen filter is additionally studied.
Read the full abstract
Optics
Burst-Mode Ultrafast Laser Welding of Sapphire and Invar Alloy Across Large Interfacial Gaps up to 10 $\mu$m
Achieving reliable joining between transparent materials and metals under non-optical-contact conditions remains challenging due to limited energy coupling and uncontrolled interfacial reaction across $\mu$m-scale gaps. Burst-mode ultrafast lasers provide a potential solution for large-gap welding through temporally distributed energy deposition. However, the underlying interaction mechanisms and achievable joining limits remain unclear. In this study, burst-mode ultrafast laser welding of sapphire to Invar alloy was investigated under controlled interfacial gaps from 3 to 10 $\mu$m. Cross-sectional microscopy, elemental mapping, white-light interferometry, and shear testing were employed to analyze joint morphology, elemental distribution, fracture behavior, and mechanical performance.After optimization of the processing parameters for burst-mode ultrafast laser welding, the interfacial morphological evolution and joint strength under different gap conditions were systematically investigated. At a 3 $\mu$m gap, cyclic thermal stresses induced by burst pulses generate transverse micro-crack networks in sapphire, accompanied by a reduction in joint strength with increasing sub-pulse numbers. Notably, at a 10 $\mu$m gap, where single-pulse welding fails, burst-mode ultrafast laser welding enables interfacial bridging with a maximum shear strength of 6.3 MPa, representing the highest level among published studies.These results indicate a gap-dependent evolution in burst-mode welding behavior governed by crack formation and energy accumulation. This study provides an important theoretical basis and practical guidance for achieving high-performance joining of dissimilar materials under large gap conditions.
Read the full abstract
Solar and Stellar Astrophysics
The Accretion Process on Protostars
The process of mass accretion onto Young Stellar Objects (YSOs) plays a fundamental role in determining the final stellar mass and setting the initial conditions for planet formation. Despite its critical role, our understanding of accretion remains fragmented, particularly for what concerns the earliest, protostellar phases (Class 0/I). While the community has consolidated a comprehensive knowledge of the accretion process of the later-stage Classical T Tauri Stars (CTTSs), a similar level of understanding is critically lacking for the protostellar phase, where the bulk of the mass is assembled. This work aims to review recent major results, both from the observational and numerical point of view, bridging the gap between the two approaches and providing an updated, complete assessment of accretion in protostellar sources. We present different techniques to measure accretion on protostars, analyze how methodological differences affect parameter estimation, discuss the caveats in comparing with numerical models, and suggest the next steps to take towards an ever more exhaustive picture of the protostellar phase.
Read the full abstract
Materials Science
Magnesium-graphene interphase boundaries created by high-pressure torsion enhance hydrogen storage kinetics:Mechanisms and significance of activation energy and frequency factor
A strategy to overcome sluggish hydrogenation/dehydrogenation of magnesium is demonstrated by creating magnesium-graphene interphase boundaries via high-pressure torsion (HPT). HPT reduces the grain size of pure magnesium from 1 mm to 850 nm, with 70% of grain boundaries having high misorientation angles. Graphene addition leads to even finer grain sizes of 10-500 nm with a bimodal morphology. The magnesium-graphene composites exhibit superior kinetics at 623 K while maintaining high air resistance. Kinetic modeling reveals that the rate-controlling mechanism transits from interfacial reaction in coarse-grained magnesium to atomic diffusion in magnesium-graphene nanocomposites. Kissinger analysis shows that the activation energy for hydrogen desorption remains unchanged at 145 +/- 2 kJ/mol, regardless of the presence of grain or interphase boundaries. However, the frequency factor (number of successful attempts to overcome the activation energy) increases with the generation of interfaces, which serve as sites for hydrogen diffusion and heterogeneous metal/hydride nucleation. These findings highlight the impact of interphase boundary engineering via severe plastic deformation for enhancing the kinetics and air resistance of hydrogen storage materials.
Read the full abstract
High Energy Physics (Theory)
Neural Networks, Dispersion Relations and the Thermal Bootstrap
We review a framework for the conformal bootstrap that does not rely on positivity and treats the infinite tower of high-dimension OPE contributions to conformal correlators through dispersion relations and neural networks. We apply it to scalar thermal two-point functions on $S^1\times \mathbb R^{d-1}$. We discuss the stability properties of the relevant non-convex optimisation scheme and potential relations to recent discussions of smoothness properties in CFT correlators. We illustrate the numerical application of the method to Generalized Free Fields and 4d holographic CFTs. This is a proceedings contribution to the “Athens Workshop in Theoretical Physics: 10th Anniversary", held at the National and Kapodistrian University of Athens on December 17-19 2025.
Read the full abstract
High Energy Physics (Phenomenology)
Prospects for Measuring $H\to \rm{invisble}$ at the FCCee
We present the prospects for measuring $H\to \rm{invisble}$ decays at the Future Circular Collider electron-positron at $\sqrt{s} = 240 \text{ GeV}$ with an integrated luminosity of 10.8 ab$^{-1}$. In this study, we consider the $ZH$ production mode with three decay modes of the $Z$ boson: $Z\to e^+e^-$, $Z\to \mu^+\mu^-$ and $Z\to jj$ ($b\bar{b}, c\bar{c}, s\bar{s}, q\bar{q}$). We find that at 95% confidence limit, the combined upper limit on the $\mathcal{B}(H\to invisible)$ could reach 0.15%.
Read the full abstract
Optics
Volumetric Optical Scattering Neural Networks
Optical neural networks rely on planar photonic circuits or spatially separated diffractive planes, limiting volumetric integration and requiring precise alignment. Here we propose a volumetric optical scattering neural network (OSNN) comprising densely packed refractive-index neurons with weak contrast $\Delta n = 0.006$. Direction-dependent first-order Born scattering provides local coupling, while ordered propagation accumulates these weak updates into global task-specific transformations. Fabrication-aware training and two-photon nanolithography produced a sub-$4 \times 10^{-4}$ mm$^3$ device containing 376,320 neurons at $1.0 \times 10^9$/mm$^3$ in a continuously written, intrinsically registered volume. Experimentally, a classifier performed class-selective energy routing with 95.8% blind-test accuracy on MNIST. The calculated passive optical transit time is below 1 ps. A separately optimized imager provided fourfold full-field spatial-sampling compression, resolved 1-$\mu$m features and enabled cross-domain transfer. An OSNN co-designed for multiple tasks encoded single-cell fluorescence-derived images into measured output maps, which were pooled into a 16-dimensional representation supporting organelle classification, morphology reconstruction, doublet detection and morphology regression, with all reported metrics exceeding 0.92. Volumetric weak scattering thus establishes an ultracompact, intrinsically registered optical computing architecture, opening a new route to scalable machine vision and biomedical analysis.
Read the full abstract
Materials Science
Structural, electronic, and optical properties of hexagonal GeSn from density functional theory
Unlike cubic GeSn, which undergoes an indirect-to-direct bandgap transition only above a finite Sn concentration, lonsdaleite (2H) germanium is an intrinsic direct-gap semiconductor. We employ first-principles density functional theory to investigate the structural, electronic, and optical properties of 2H-Ge$_{1-x}$Sn$_{x}$ random alloys in the dilute Sn regime ($x \le 0.10$). Substitutional disorder is modeled using 48-atom special quasirandom structure (SQS) supercells, and the coherent effective band structure is recovered via spectral band unfolding. We show that the semiconducting alloy configurations retain a direct bandgap at the $\Gamma$ point, with a moderate, nearly linear reduction of the bandgap in the dilute regime that shifts the fundamental absorption edge toward the mid-infrared. As the gap approaches zero, its calculated value becomes increasingly sensitive to the atomic configuration and supercell size. Evaluation of the optical transition matrix elements shows that the polarization anisotropy characteristic of pristine 2H-Ge remains observable under dilute Sn alloying. Although alloy disorder relaxes the crystal selection rules, the band edge response remains dominated by light polarized perpendicular to the crystal $c$ axis, whereas the parallel component remains weaker. These results identify dilute hexagonal GeSn as a tunable direct-gap system with a strongly polarization-dependent optical response in the infrared.
Read the full abstract
Materials Science
Helium Bubbles in Liquid Lead Lithium Solutions: Pressure Inhomogeneities at Interfaces and Non Ideal Mixture Effects
The extremely low solubility of helium in liquid metals may lead to rapid supersaturation, promoting spontaneous formation of helium bubbles by nucleation. Once nucleated, the stability of these bubbles is governed by the properties of the helium liquid metal interface. In particular, interfacial tension between the immiscible phases controls bubble interactions and induces local pressure inhomogeneities. This work is motivated by the need of a better understanding of helium bubble formation in liquid Pb Li alloys, which are of particular relevance for the design of breeding blankets in the future nuclear fusion reactors. We employ classical molecular dynamics simulations to investigate helium segregation in a range of lead lithium systems, including the limiting cases of pure lead and pure lithium. Changes in local pressure are evaluated from direct mechanical calculations, enabling the characterization of interfacial properties. Interfacial tension and radius of the bubble are subsequently determined across multiple thermodynamic conditions, spanning temperatures starting near the melting points of the constituent metals up to 1021 K. The impact of curvature and composition of the alloy on the interfacial behaviour are also investigated.
Read the full abstract
Quantum Physics
Three ways to find comfort with the Bell proof and the results of the Bell experiments
Bell's theorem states that no description of a Bell experiment can be simultaneously local, realistic in the sense of counterfactual definiteness, and free of conspiracy between settings and hidden state. The recent generation of experiments has confirmed the predicted violation of the CHSH inequality, so one of the assumptions must be abandoned. Which one, and how one reconstructs a coherent worldview after doing so, is a question on which many authors disagree. This paper is written by three such authors. All three reject both counterfactual definiteness and conspiratorial violation of statistical independence of setting choices and state. After a joint exposition of the classical half of Bell's theorem in the language of Pearl-style causal graphs, a joint summary of the loophole-free experiments, and a joint survey of the recent literature, each author states where they have presently arrived. Gill accepts irreducible and non-local quantum randomness and finds the choice between locality and realism a false dichotomy. In his later works, Bell derives counterfactual definiteness from classical local causality, and that is what has to go. The metaphysical concepts "realism", "locality", "causality" need to be reconsidered. Helland reconstructs the Hilbert-space formalism from a theory of accessible variables, and from this theory he concludes that every observer must be limited in a specific sense. Jongejan proposes a geometric hidden-variable construction in which the degree of violation of the CHSH inequality depends on the number of dimensions of space, Tsirelson's bound corresponding to three dimensions. The authors conclude with a discussion.
Read the full abstract
Materials Science
Ultrafast Critical Slowing of Spin Dynamics and Emergent Nonequilibrium Fano Interference in Fe3GeTe2
Fe$_3$GeTe$_2$ is a prototypical metallic van der Waals ferromagnet with itinerant magnetism and a highly tunable Curie temperature, yet how electronic excitations couple to spin and lattice degrees of freedom across its magnetic transition remains largely unexplored. Here, we use two-color pump-probe reflectivity to investigate the coupled electronic, spin, and lattice dynamics. The time-resolved reflectivity exhibits a tri-exponential relaxation, in which the intermediate component shows an anomaly near the Curie temperature due to enhanced interlayer spin-lattice interactions, while the slowest component displays pronounced critical slowing down with an exponent of ~ 0.3, revealing non-universal relaxation dynamics associated with intralayer spin correlations. Furthermore, we observe an emergent nonequilibrium A1g phonon Fano asymmetry that is suppressed in the ferromagnetic phase but anomalously enhanced in the paramagnetic regime, driven by thermally activated anharmonic decay pathways that bridge the kinematic gap to a hot electronic continuum. The pronounced enhancement of the acoustic strain pulse amplitude near T$_c$ further evidences robust magnetoelastic coupling. Overall, our results reveal how magnetic order governs the interplay among critical spin dynamics, electronic continuum excitations, and lattice response in metallic van der Waals ferromagnets
Read the full abstract
Instrumentation and Detectors
RPC Telescope Tests for Muon Detection at Laser-Plasma Accelerators
We report on a feasibility study conducted at the ELBA facility at ELI Beamlines in 2025 to investigate the possible production of muons from high-energy electron beams generated by extended laser-plasma interactions in optically generated plasma waveguides. Our team operated a portable, autonomous, and compact telescope based on Resistive Plate Chamber (RPC) detectors, positioned to detect high-penetration charged particles originating from the beam dump. The campaign demonstrated that RPC detectors can operate reliably and safely in the ELBA environment, even under intense radiation and electromagnetic conditions. The collected datasets, though statistically limited and affected by lack of beam control, allow detailed characterization of the background and validated the detectors' stability and tracking performance. These results confirm the feasibility of the approach and provide the foundation for a dedicated future run under optimized beam conditions, where muon detection sensitivity will be substantially improved.
Read the full abstract
Mesoscale and Nanoscale Physics
Observation of end-to-end pumping in a quasiperiodic Fibonacci-type photonic chain
End-to-end pumps utilizing edge-localized states offer a promising route to operate as connecting buses, supplying efficient and robust connectivity between non-neighboring elements in a network. Here, we investigate a finite quasiperiodic Fibonacci-type photonic chain and demonstrate its ability for end-to-end pumping, with only small and simple changes to the system. First, we use a tight-binding formalism to numerically show that a localized pumping state can be transferred between opposite ends of the system, with only a small structural change to the chain. Then, we experimentally implement this end-to-end pump in an array of coupled optical waveguides, where light propagation is effectively described by the tight-binding model under the paraxial approximation, enabling direct correspondence between theory and experiment. We numerically simulate and experimentally demonstrate pumping by injecting light into a single waveguide at one end of the setup, which activates a localized pumping state. As the light propagates along the wave guide array, it is also pumped to the other end. We further show that pumping remains robust against structural deformation, such as controlled defects in the waveguide array. Our results establish that quasiperiodic Fibonacci-type photonic lattices are a robust and experimentally viable platform for disorder-resilient state transfer.
Read the full abstract
Solar and Stellar Astrophysics
Discovery and Characterization of White Dwarf-FGK Main-Sequence Binaries within the Optical Main-Sequence Locus
White dwarf main-sequence (WDMS) binaries provide important laboratories for studying binary evolution and the formation of low-mass white dwarfs. In this work, we identify 654 reliable WDMS candidates with FGK-type companions from an initial set of 772 ultraviolet-excess sources, selected using stellar atmospheric parameters from LAMOST spectroscopy and subsequently refined with Gaia DR3 astrometry and photometry together with ultraviolet data from GALEX. Candidates were selected based on ultraviolet excess relative to the Gaia main-sequence locus and refined using isochrone constraints to exclude systems inconsistent with MS companions. Binary spectral energy distribution fitting yields effective temperatures and radii for both components, as well as distance and extinction estimates. The MS companions are dominated by G-type stars (\(\sim52\%\)), with comparable fractions of F- and K-type companions, and no A-type primaries. Using white-dwarf evolutionary cooling models, we find that the WD components are predominantly low-mass (\(M_{\rm WD}\,\sim\,0.2\text{--}0.4\,M_\odot\)), including a substantial population of extremely low-mass (\(<0.3\,M_\odot\)) WDs likely produced through binary interaction. The WDs are generally hot (\(\sim1.5\times10^4\,\mathrm{K}\)), consistent with the ultraviolet selection bias favoring luminous, large-radius WDs. Multi-epoch LAMOST radial velocities show larger amplitudes than those of a comparison sample of MS stars, supporting the close-binary nature of these systems. Although subject to strong selection effects, the catalog offers a clean and well-characterized sample of FGK+WD binaries.
Read the full abstract
Quantum Physics
QCIVET: A Quantum–Classical Pipeline Integrity Framework with Contract-Based Subtype Verification and Hash-Chained Audit Traces
Hybrid quantum–classical pipelines increasingly support applications such as drug discovery, fraud detection, and cloud quantum processing unit (QPU) auditing, yet existing integrity-verification methods remain largely classical and fail to capture quantum-stage behaviour. We propose QCIVET, a contract-based integrity-verification framework that models a hybrid pipeline as a sequence of stages with explicit specifications and audits it at both syntactic and semantic levels. Syntactic integrity is enforced through a hash-chained audit trail with optional external anchoring, while semantic integrity at quantum stages is verified using a calibrated observable-deviation test grounded in the behavioural-subtyping discipline of Liskov and Wing. We prove soundness under the diamond-norm distance between quantum channels, conditional completeness for informationally complete observable families, and compositionality under inheritance chains. We further identify a class of Z-only-sneaky overrides that evade weak single-Pauli contracts but are exposed by multi-Pauli contracts. The framework is evaluated under calibration-derived noise models from IBM Quantum Eagle r3 and Heron r2 processors, and the subtype-separation protocol is validated end-to-end on a real ibm_fez (Heron r2) processor. QCIVET is instantiated on three representative applications: variational quantum eigensolver (VQE) for drug discovery, quantum-assisted fraud detection, and customer-side auditing of cloud QPU services. The reference implementation, including a real-time verification engine with sub-millisecond per-stage commit latency, is released as open source.
Read the full abstract
Materials Science
Apparent Ferroelectric Polarization Hysteresis and a Simple Method to Observe Piezoelectric Strain Loops with a Microphone
Extra components in series to non-ferroelectric capacitance can cause apparent ferroelectric D-E hysteresis loops even with the double-wave method (DWM). Characteristics of fake loops are studied withsimple circuit models, and suspicious loops of actual materials are found in some papers using the DWM. Inverse piezoelectric strain also reverses along with the polarization by the electric field, and S-E loops are considered more reliable to prove ferroelectricity than the D-E loops. But measurement of S-E loops usually requires expensive instruments in contrast to D-E loops with a simple circuit. A very simple method is developed to observe S-E loops of bulk samples with an inexpensive small electret microphone and a little expansion to the circuit for D-E loops. S-E loops of a commercial ceramic capacitor by this method reveal that its D-E loops apparent.
Read the full abstract
Quantum Physics
Feedback-based quantum optimization and its classical counterpart: quantum advantage and the power of classical algorithms
Feedback-based quantum optimization is a quantum approach to combinatorial optimization. In this paper, we introduce the classical counterpart of feedback-based quantum optimization by using the quantum-classical correspondence of spin systems to discuss the possibility of quantum advantage. It also enables us to develop higher-order theory of a previously proposed classical approach to feedback-based quantum optimization. First, we compare the feedback-based algorithm for quantum optimization (FALQON) and its variant with their classical counterparts. Then, we perform benchmark tests of various quantum and classical algorithms with small-scale instances, and of classical algorithms with large-scale instances. Main findings are that (i) quantum algorithms can be advantageous to classical algorithms in terms of the quality of solutions, while classical algorithms tend to show faster convergence than quantum ones, and (ii) one of the classical algorithms discussed in this paper shows significant scalability for higher-order unconstrained binary optimization problems. These findings highlight the importance of quantumness and the usefulness of classical approaches.
Read the full abstract
High Energy Physics (Phenomenology)
Possibility of Probing an Extra Higgs Boson at the Compact Linear Collider
We study the sensitivity of the Compact Linear Collider (CLIC) to an additional neutral Higgs boson $H$ through the vector boson fusion process $e^+e^- \to H\nu\bar \nu$, followed by the decay $H \to W^+W^-$, with both $W$ bosons decaying leptonically, resulting in a dilepton plus missing transverse energy final state. Within the framework of the Two Higgs Doublet Model, where both production and decay are governed by the Higgs mixing angle $\cos(\beta-\alpha)$, we perform a detector-level analysis and show that a high-energy CLIC can probe $H$ via this channel, allowing a direct measurement of the $HWW$ coupling.