Peer Revenue Returns subject to peer review

Papers

Fresh from arXiv, typeset properly. Highlighted words trade on the market.

Physics

Watch Physics (sign in to use)

Wednesday 8 April

General Physics

Relativity: A matter of causality

We take causality and uniqueness of events observation as our driving forces. They are built in in the way we define distinct observers, which then require a finite time to communicate between each other. This unavoidably leads to the existence of maximal transfer-information velocity between arbitrary (not necessarily inertial) reference frames. Inertial reference frames are defined by fixing the geometrical properties of (spatial) distance without any reference to relativity, electromagnetism, or laws of physics in general. For these inertial reference frames, the causality condition fixes the causal group to be the orthochronous inhomogeneous Lorentz group times dilatations. The mathematics we will use are quite basic.
Read the full abstract

Quantum Physics

QNAS: A Neural Architecture Search Framework for Accurate and Efficient Quantum Neural Networks

Designing quantum neural networks (QNNs) that are both accurate and deployable on NISQ hardware is challenging. Handcrafted ansatze must balance expressivity, trainability, and resource use, while limited qubits often necessitate circuit cutting. Existing quantum architecture search methods primarily optimize accuracy while only heuristically controlling quantum and mostly ignore the exponential overhead of circuit cutting. We introduce QNAS, a neural architecture search framework that unifies hardware aware evaluation, multi objective optimization, and cutting overhead awareness for hybrid quantum classical neural networks (HQNNs). QNAS trains a shared parameter SuperCircuit and uses NSGA-II to optimize three objectives jointly: (i) validation error, (ii) a runtime cost proxy measuring wall clock evaluation time, and (iii) the estimated number of subcircuits under a target qubit budget. QNAS evaluates candidate HQNNs under a few epochs of training and discovers clear Pareto fronts that reveal tradeoffs between accuracy, efficiency, and cutting overhead. Across MNIST, Fashion-MNIST, and Iris benchmarks, we observe that embedding type and CNOT mode selection significantly impact both accuracy and efficiency, with angle-y embedding and sparse entangling patterns outperforming other configurations on image datasets, and amplitude embedding excelling on tabular data (Iris). On MNIST, the best architecture achieves 97.16% test accuracy with a compact 8 qubit, 2 layer circuit; on the more challenging Fashion-MNIST, 87.38% with a 5 qubit, 2 layer circuit; and on Iris, 100% validation accuracy with a 4 qubit, 2 layer circuit. QNAS surfaces these design insights automatically during search, guiding practitioners toward architectures that balance accuracy, resource efficiency, and practical deployability on current hardware.
Read the full abstract

General Relativity and Quantum Cosmology

From freely falling frames to the Lorentz gauge-symmetry group and a Hamiltonian composite theory of gravitation

The concept of freely falling frames suggests that gravity exhibits a local Lorentz gauge symmetry and requires a background Minkowski reference frame. The gauge vector fields of a Yang-Mills-type theory can be constructed from the transformations to these local freely falling frames, thereby leading to a composite theory of gravity. We propose coordinate conditions under which an exact black-hole solution can be obtained. Our analysis of planar gravitational waves reveals that, despite the large symmetry group, composite gravity possesses only four physical degrees of freedom. We elaborate a Hamiltonian formulation of composite gravity, derive the full set of constraints for the nonlinear theory, and outline the pathway toward its quantization.
Read the full abstract

Nuclear Experiment

Measurement of inclusive $J/\psi$ polarization in Ru+Ru and Zr+Zr collisions at $\sqrt{s_{\rm NN}}=200$ GeV at STAR

The first measurement of inclusive J/psi polarization at mid-rapidity (|y^{J/psi}| < 0.8) in 200 GeV Ru+Ru and Zr+Zr collisions at sqrt(s_NN) = 200 GeV with the STAR experiment at RHIC is presented. J/psi mesons are reconstructed through their di-electron (e+e-) decay channel. The polarization parameters (lambda_theta, lambda_phi) are measured as a function of the J/psi transverse momentum (p_T) and collision centrality in both the helicity and the Collins-Soper frames. These polarization parameters are found to be consistent with zero across the measured J/psi p_T range of 0.2 < p_T < 10 GeV/c and across collision centralities within 0-80 percent in both frames. These results are consistent with corresponding measurements p+p collisions at the same collision energy and with transport-model calculations.
Read the full abstract

Other Condensed Matter

Identifying Topological Invariants of Non-Hermitian Systems via Domain-Adaptive Multimodal Model for Mathematics

Identifying topological invariants are endowed with profound physical connotations in the fields of condensed matter physics. However, they are often limited by the failure of standard theorems and high computational costs. Traditional machine learning methods typically treat this problem as a black-box regression, which fails to learn the underlying mathematical structures of lattices. To this end, we propose a straightforward yet powerful multimodal model that fundamentally improves topological invariants discovery through two key methodological innovations. First, instead of feeding raw data into a standard network, our model introduces a dual-track alignment mechanism. This mechanism treats eigenvalues as context sequences and eigenvectors as matrix structures, enabling the model to naturally capture the interrelated algebraic and geometric properties of topological states. Second, to resolve the common problem where deep learning models make numerical mistakes in exact mathematical calculations, we use a tool-integrated reasoning paradigm. Within this paradigm, the neural network acts as a logical controller to calculate discrete topological indices. This design eliminates the uncertainty of deep learning, ensuring zero-error calculations from continuous physical data. We demonstrate that our model can accurately reconstruct complex three-dimensional generalized Brillouin zones and achieve 97% accuracy in calculating non-Bloch Chern numbers in long-range transition systems. By combining the flexible logic of multimodal artificial intelligence with the rigorous precision of symbolic computation, this work provides a reliable and highly versatile tool for exploring exotic topological phases.
Read the full abstract

All authors Jiuchun Meng, Lichao Sun, Xiumei Wang, Dandan Zhu, Xingping Zhou

Optics

A Simple and Robust Balanced Homodyne Detector for High-Repetition-Rate Pulsed Sources

We design and experimentally characterize a balanced homodyne detector optimized for high-repetition-rate (100 MHz) pulsed optical sources. Unlike conventional transimpedance-amplifier architectures, which suffer from nonlinearities and dynamic instabilities with ultrashort pulses, our approach allows to directly amplify the photocurrent extracted at the common photodiode node without feedback loops. A theoretical model describing the detector response, noise, and pulse-to-pulse correlations is developed, providing quantitative predictions for the signal variance, signal-to-noise ratio (SNR), and inter-pulse correlations. Implemented with two matched InGaAs photodiodes illuminated by a 1030 nm mode-locked laser at 100 MHz, the detector exhibits excellent linearity and shot-noise-limited scaling of the signal variance with optical power. Optimizing the temporal integration window yields a maximum SNR of about 14 dB, while correlation measurements confirm negligible inter-pulse correlations. These results demonstrate that the proposed architecture offers a robust and simple solution for high-speed pulsed homodyne detection, suitable for quantum optics and continuous-variable quantum information applications.
Read the full abstract

All authors Samuele Altilia, Edoardo Suerra, Pietro Puppi, Sebastiano Corli, Enrico Prati, Simone Cialdi

Medical Physics

Statistical Analysis of the Reliability of Data Collected with Wireless Electrocardiograms Outside Clinical Settings

Cost-effective wireless electrocardiograms (ECGs) enable long-term and scalable monitoring of cardiac patients in their home and work environments. Because they offer greater freedom of movement, they are also suitable for investigating the relationship between cardiac workload and underlying physical exertion. However, this requires that the quality of the generated data meets the standards of clinical devices. The aim of this study is to examine this closely. We therefore analyze data from 54 healthy subjects who performed five physical activities using wireless ECGs outside of clinical settings and without medical supervision. The results are compared with clinically collected data from standard 12-lead ECGs (2493 subjects) and Holter ECGs (29 subjects), with particular attention to the RR interval time series (tachogram) and heart rate variability (HRV). Our study shows significant statistical agreement between the different datasets. We calculated the 95% confidence intervals for the mean RR interval and HRV assuming that (1) the statistics of the 12-lead ECGs could serve as reliable reference, and (2) the statistics of the 12-lead ECGs cannot be taken as reliable reference. The p-values for both conditions (for the RR interval: 0.23 and 0.26 respectively; for HRV: 0.10 and 0.11 respectively) suggest that there is insufficient evidence to reject the hypothesis that significant statistical agreement exists between the different datasets.
Read the full abstract

Astrophysics of Galaxies

Large Interstellar Polarisation Survey. III. Observational constraints on the structure of grains

Dust in the diffuse interstellar medium remains incompletely understood with regard to the structure, composition, size distribution, and alignment properties of the grains. Joint observations of reddening, starlight polarisation spectra, and polarised dust emission for individual sightlines provide essential constraints on such properties. We study a far-UV selected sample of 96 reddening curves, for which optical linear polarisation spectra were obtained with FORS at the VLT as part of the Large Interstellar Polarisation Survey (LIPS). Starlight polarisation spectra for 60 stars are presented in this work. These data are combined with Gaia distance estimates and Planck thermal dust emission. A three-component dust model is made publicly available. It consists of nanoparticles, amorphous grains, and micrometre-sized dust agglomerates, varying axial ratios, porosities, sizes, element abundances, and alignment efficiencies to match the observations. The diversity of reddening and polarisation spectra is well reproduced by prolate grains with typical axial ratios of two, a porosity of 10%, and high alignment efficiencies. Such efficiencies can be achieved with radiative torque alignment theory (RAT), but not with imperfect Davis-Greenstein (IDG) alignment, except when adjusting the magnetic-field orientation to maximise the polarisation. Micrometre-sized dust contributes wavelength-independent grey extinction in the optical, accounts for about one-third of the visual extinction, and carries one-third of the dust mass. A follow-up submillimetre survey with high-resolution polarimetry will further constrain grain shapes and alignment physics.
Read the full abstract

All authors Ralf Siebenmorgen, Stefano Bagnulo, Lapo Fanciullo, Thomas Vannieuwenhuyse, Vincent Guillet

Quantum Physics

Scalable on-chip integration of diamond color centers for cryogenic quantum photonics

Chip integration of quantum emitters is a crucial milestone for scalable quantum photonic information processing. Among optically active defect centers for quantum photonics, diamond color centers are promising because of their long spin coherence times and high photon emission rates. However, for a coherent-photon emission, they typically require a cryogenic environment to protect optical coherence from thermal phonons, which makes chip integration challenging. In this paper, we develop a chip-integrated diamond photonic crystal cavity embedding an ensemble of nitrogen-vacancy (NV) centers. We confirm cryogenic operation by observing Purcell enhancement of NV-center emission via an edge-coupled optical fiber. This result demonstrates successful integration of diamond color centers, a photonic crystal cavity, and an optical waveguide-fiber package, representing a key step toward scalable diamond-based quantum communication platforms.
Read the full abstract

All authors H. Kurokawa, K. Sato, M. Kamata, S. Ishida, H. Matsukiyo, N. Pholsen, M. Nishioka, S. Ji, H. Otsuki, S. Hachuda, M. Kunii, T. Tamanuki, K. Kimura, K. Takenaka, Y. Sekiguchi, S. Onoda, S. Iwamoto, T. Baba, H. Kosaka

Astrophysics of Galaxies

Extinction Distributions in Nearby Star-resolved Galaxies. II. M33

Extinction maps are essential for tracing interstellar dust and enabling accurate stellar population studies in galaxies. Here, a high-resolution extinction distribution of nearby galaxy M33 is constructed by fitting multiband color indexes of the individually resolved red giant branch (RGB) stars from the Panchromatic Hubble Andromeda Treasury: Triangulum Extended Region (PHATTER) survey. Achieving an angular resolution of approximately 6$^{\prime\prime}$ ($\sim$ 24.4 pc), the extinction map reveals the intricate and heterogeneous distribution of dust throughout the entire disk of M33, with distinct delineation of spiral arms, inter-arm regions, and compact dust clouds. In addition, it exhibits strong spatial correspondence with the distributions of total hydrogen, H I, and CO, underscoring the reliability of the extinction map for tracing both diffuse and dense components of the interstellar medium. The derived $V$-band extinction reaches up to 2.5 mag per pixel, with a mean value of about 1.05 mag. Beyond providing new insights into the dust structure of M33, the extinction map offers a robust foundation for accurate extinction corrections and will support future studies, including upcoming observations with the Chinese Space Station Telescope.
Read the full abstract

All authors Yuxi Wang, Yi Ren, Jian Gao, Bingqiu Chen, Ying Li

Astrophysics of Galaxies

Galaxy discs regulate the growth of supermassive black holes

We examine the relationship between the mass of present-day central supermassive black holes (SMBHs, $M_{\rm BH}$), and the stellar mass ($M_{\star}$) and halo mass ($M_{200}$) of their host galaxies in the EAGLE simulation, and find that scatter about these relations correlates with both halo structure and galaxy morphology. EAGLE reproduces the observed $M_{\rm BH}$-$M_{\star}$ relation, including (qualitatively) its dependence on morphology: at fixed $M_{\star}$, disc-dominated galaxies host less massive SMBHs than ellipticals. We show that $M_{\rm BH}$ correlates with $M_{200}$, as expected if SMBHs are regulated by processes acting on the scale of the host dark matter halo, but exhibits a tighter correlation with the halo binding energy ($E_{\rm bind}$), signalling that this quantity, which encodes information about both halo mass and halo structure, is more fundamental to $M_{\rm BH}$. As with $M_{\rm BH}$-$M_{\star}$, scatter about the $M_{\rm BH}$-$E_{\rm bind}$ relation is strongly correlated with morphology. Gas in the central few parsecs of galaxies with present-day discs retains strong rotational support as the galaxy grows, inhibiting inward transport and precluding periods of rapid SMBH growth by gas accretion. In galaxies destined to be present-day ellipticals, however, this rotational support is disrupted, enabling gas to be funnelled onto the central SMBH, triggering rapid growth. Evolution of the mass fraction of stars formed ex-situ indicates that this disruption is caused by galaxy-galaxy interactions and mergers. Our findings corroborate the conclusion of recent studies, based on controlled simulations of an ~$L^{\star}$ galaxy, that prolonged secular galaxy evolution inhibits central SMBH growth.
Read the full abstract

Earth and Planetary Astrophysics

Constraining an exoplanets magnetic field using star-planet interactions

Theory predicts that a planet with a sufficiently strong magnetic field orbiting close to its host star could induce star-planet magnetic interactions. This is potentially observable as an optical or radio signal synchronised with the orbital period. We analyze 18 years of high-resolution optical spectroscopy of GJ 436, a low mass star orbited by a Neptune-sized exoplanet in a polar eccentric orbit. Stellar activity indicators show enhancements at a period corresponding to the exoplanet orbit, modulated by stellar rotation, and the star's 8-year magnetic cycle. We interpret this as a signal of star-planet magnetic interaction. Using a geometric model, we reproduce these periods if GJ 436 b has a magnetic field strength of 6 to 110 Gauss.
Read the full abstract

All authors D. Revilla, P.J. Amado, R. Luque, P. Schöfer, A.F. Lanza, A. Binnenfeld, J.A. Caballero, A.P. Hatzes, G.W. Henry, S.V. Jeffers, S. Kaur, E. Pallé, L. Peña-Moñino, M. Pérez-Torres, A. Quirrenbach, A. Reiners, I. Ribas, D. Viganò, M.R. Zapatero Osorio, S. Zucker

Fluid Dynamics

Solitary wave structure of transitional flow in the wake of a sphere

The soliton-like coherent structure (SCS), which has been verified to exist in both transitional and turbulent boundary layers1-4, still poses a challenge in the understanding of its formation and behavior. In our previous study (Niu et al.5), the SCS was also found to exist in the transitional wake flow behind a sphere. In present study, the formation and evolution of the SCS is further investigated at four Reynolds numbers by numerical simulation. The results show that at the early stage of the turbulence transition, the SCS appears as a form of wave packet during the Tollmien-Schlichting (T-S) wave stage. With the increase of the Reynolds number, the SCS reaches its maximum amplitude downstream where the velocity discontinuity occurs. This position is located after the breakdown of the T-S wave and the three-dimensional structure is formed. Then, the SCS conserves its shape and amplitude over a long distance downstream. The relationships among the SCS, the spikes, the vortex structures, and the high-shear layers are further analyzed. It is found that the SCS in the wake flow has similarities to the phenomena observed in boundary layer flows during the turbulent transition. The vortex structures and high-shear layers mostly wrap around the border of the SCS. The vortex structure is considered to be as a consequence of the development of the SCS rather than its cause.
Read the full abstract

All authors Lin Niu, Hua-Shu Dou, Changquan Zhou, Wenqian Xu

Soft Condensed Matter

Frictional sliding strength of knotted and capstan configurations along the axis of a cylinder

We investigate the sliding strength of thin filaments in frictional contact with a translating cylinder, perpendicular to the filaments' axes, in knotted (clove hitch) and unknotted (capstan) configurations. Recent work reported superlinear scaling for surgical knots with elasto-plastic filaments [1]. Testing the clove hitch with various materials (elastomeric rods, metallic wires, braided ropes) reveals similar nonlinear behavior, ruling out plasticity. To explore the source of the previously reported nonlinear behavior, we perform three-dimensional FEM simulations (resolving full 3D mechanics) and reduced-order DER simulations (isolating geometric effects by neglecting cross-sectional deformation). Both FEM and DER simulations reproduce the experimental scaling. Simplifying the knot topology by studying capstan angles from $\pi/4$ to $4\pi$ yields comparable superlinear behavior, transitioning to linearity at smaller angles. We rationalize the results by developing an analytical model based on planar elastica theory for the capstan configuration (which exhibits behavior similar to the clove hitch but with a simpler topology). The model reproduces the observed superlinear behavior and rationalizes it by coupling the evolution of normal forces and contact arclength during tightening. The analysis further predicts transition to linearity when full contact between the filament and the cylinder is established, providing a mechanical framework applicable across materials, geometries, and topologies.
Read the full abstract

All authors Javier Sabater, Ji-Sung Park, Jérôme Crassous, Sébastien Neukirch, Pedro M. Reis

Optics

Widely tunable SNAP microresonators induced at the optical fiber intersections

A widely tunable free spectral range (FSR) is essential for many microresonator applications, but achieving it in compact high-Q systems remains a significant challenge. Surface nanoscale axial photonics (SNAP) provides a route to such devices by localizing whispering-gallery modes through nanoscale effective-radius variations along an optical fiber. Recently, it has been experimentally demonstrated that side-coupling between two optical fibers can induce high-Q SNAP microresonators. In contrast to broadly explored monolithic microresonators, this configuration enables extensive mechanical tuning of the microresonator configuration and FSR through fiber bending, tilting, and twisting. Here, we develop the theory of SNAP microresonators induced at optical fiber intersections, which has remained largely unexplored. We consider weakly twisted fibers, whose geometry can be decomposed into tilting and bending. We show that extremely small fiber curvature critically affects the coupling-induced cutoff frequency variation, the shape of the effective axial potential, and the spectrum of the induced resonator. We discuss the physical origin of this curvature and show that accounting for it resolves the discrepancy between theory and experiment. These findings establish side-coupled optical fibers as a simple, reconfigurable platform for realizing microresonators with a widely tunable FSR.
Read the full abstract

Mesoscale and Nanoscale Physics

Microscopic evidence of spin-driven multiferroicity and topological spin textures in monolayer NiI2

In type II multiferroics, noncollinear spin textures are expected to induce electric polarization directly, leading to strong magnetoelectric coupling. Realizing such spin driven multiferroicity in two-dimensional systems, and elucidating the interplay between local spins and electric polarization, are of both fundamental and technological importance. Here, using vectorial spin polarized scanning tunneling microscopy, we investigated the spin-driven multiferroicity in monolayer NiI2 at atomic scale. We identify a canted spin-spiral state with fully determined spin rotation plane, accompanied by a 2Q charge modulation. At spin spiral domain walls, we discover topological spin textures that composed of meron/antimeron pairs. These textures are associated with distinct charge pattern and notable band shifts, indicating local bound charges induced by variations of ferroelectricity at domain wall. Our observations are well captured by a realistic spin model incorporating Kitaev interactions and generalized spin-current model of type II multiferroicity. The findings provide microscopic evidence of spin-driven multiferroicity in an extreme 2D system and establish a platform for low-dissipation, electric-field control of topological spin textures.
Read the full abstract

All authors Haitao Wang, Tianxing Jiang, Weiyi Pan, Xu Wang, Hongyu Wang, Junchao Tian, Lianchuang Li, Dongming Zhao, Qingle Zhang, Chenxi Wang, Ying Yang, Hongjun Xiang, Changsong Xu, Donglai Feng, Tong Zhang

Mathematical Physics · Cross-listed from math.DG

Multidimensional cost geometry

In this paper, we study the geometric structure induced by the canonical reciprocal cost function and its natural $n$-dimensional extension. In logarithmic coordinates, the potential depends only on the linear combination $S=\alpha\cdot t$, and the associated Hessian metric has rank one at every point. The geometry is intrinsically degenerate and effectively one-dimensional, with an $(n-1)$-dimensional null distribution. On the other hand, when the same function is expressed in the original $x$-coordinates, the corresponding Hessian is generically nondegenerate and defines a pseudo-Riemannian metric away from explicit singular hypersurfaces. We further analyze affine and Levi-Civita geodesics and compare their behavior. In particular, affine geodesics in logarithmic coordinates are globally defined, while in $x$-coordinates their behavior is restricted by the domain and the singular set. Finally, we relate the construction to symmetrized Itakura-Saito and Bregman divergences, and give a Fisher-Rao realization of the logarithmic Hessian metric.
Read the full abstract

Optics

Nanobeam Laser Cavities with High Quality-factor and Near-Unity Outcoupling Efficiency

Cavities with high quality (Q) factor and small mode-volume are crucial to realize high-performance nanolasers suitable for optical interconnects. In this work, we propose a novel one-dimensional photonic crystal nanobeam cavity design with fins for controlled electrical injection into the active region. An effective optimization algorithm based on first-order perturbation theory of quasinormal modes is implemented and shown to significantly enhance the cavity quality factor. The one-dimensional geometry of the cavity lends itself to unidirectional coupling of the resonant mode into the waveguide by introducing asymmetry of the mirror. The resulting design is shown to achieve high extraction efficiencies ($>90\%$) while maintaining a high Q-factor ($>10 \cdot 10^3$). Through an analysis of the cavity's decay channels, we find that the introduced asymmetry induces unexpected interactions between the cavity's decay channels. Passive InP cavities are fabricated and experimentally characterized, demonstrating record-high quality factors exceeding $170 \cdot 10^3$ for designs without fins and up to $70 \cdot 10^3$ for designs with fins, confirming the efficacy of the optimization method and quality of the fabrication process.
Read the full abstract

All authors Mathias Marchal, Meng Xiong, Evangelos Dimopoulos, Yi Yu, Kresten Yvind, Jesper Mørk

Physics and Society

Towards using renewable energy in Mezcal production

This paper explores the electrification of mezcal distilling in Oaxaca, Mexico, as a sustainable alternative to traditional firewood methods. We investigate the mezcal process, including cooking, grinding, fermentation, and distillation, and propose a photovoltaic system for distillation. The research also includes scientific outreach activities in the producing communities. We, in collaboration with the communities, proposed novel uses of renewable energies. The results of chemical analysis (chromatography and FTIR) and sensory data for distillation using firewood and electricity are presented to compare the mezcal produced with solar energy and traditional mezcal. Our studies conclude that electrical distillation can reduce environmental impact and improve energy efficiency without compromising product quality.
Read the full abstract

All authors J. Antonio del Río Portilla, Argelia Balbuena-Ortega, Anabel López-Ortiz, Jorge Alberto Tenorio, Nicté Yasmín Luna-Medina, Patricio Javier Valadés-Pelayo, Federico del Río-Portilla, Mayra León-Santiago, Alfonso Valiente-Banuete

Geophysics

Regularized Nonstationary Phase Estimation via Proximal Maximization of Skewness and Kurtosis

Wavelet phase is a critical parameter in seismic processing, where zero-phase wavelets are essential for maximizing temporal resolution and ensuring accurate interpretation of subsurface structures. In practice, however, the seismic wavelet is often nonstationary, exhibiting a phase that varies in space and time due to physical factors such as attenuation, dispersion, and thin-bed tuning effects. Higher-order statistical measures-specifically kurtosis and skewness-are traditionally maximized to drive the signal toward a maximally non-Gaussian or maximally asymmetric zero-phase state. This paper addresses the computational and stability challenges inherent in nonstationary estimation by casting the problem as a regularized non-convex optimization task. We propose a robust framework based on the Alternating Direction Method of Multipliers (ADMM) that eliminates the instability and artifacts associated with traditional piecewise-stationary windowed approaches. The core of our contribution is the derivation of the first closed-form proximity operators for the scale-invariant inverse kurtosis and inverse skewness functionals. By exploiting the signed permutation invariance of these statistical measures, we reduce the high-dimensional proximal subproblems to efficient one-dimensional root-finding tasks. We provide a detailed geometric interpretation of the optimality conditions, demonstrating that the global minimizer is governed by a branch-separation property. Furthermore, we derive an explicit critical threshold parameter which provides a theoretical rule for identifying the global minimum among multiple stationary points. Numerical validations on synthetic and real seismic data demonstrate that the proposed proximal algorithms achieve linear computational complexity and superior stability compared to traditional methods, effectively enabling nonstationary phase correction.
Read the full abstract

Mathematical Physics · Cross-listed from math.NA

Continuum dynamics from quantised interaction rules

Hyperbolic conservation laws are conventionally solved by evolving reconstructed floating-point fields, incurring both computational overhead and structural diffusion near discontinuities. Here we introduce the Fast Quantised Numerical Method (FQNM), in which the conservative operator is realised directly as an antisymmetric integer transfer rule on a countable state space, with continuum fields appearing only as reconstructed observables. For scalar conservation laws with monotone flux splitting, we establish exact conservation, monotonicity, TVD and $L^1$ stability, and convergence of the reconstructed solution to the entropy solution under $\delta/\Delta x \to 0$. We further show that distinct classical flux formulations collapse to identical dynamics whenever they induce the same integer transfer rule, identifying the transfer operator as the effective computational object. Across representative regimes, FQNM remains stable near the Nyquist limit in high-frequency transport, preserves grid-level shock structure in Burgers dynamics, and in a matched Roe-flux Sod prototype preserves shock structure at the density-scale conserved-state level relative to an exact Riemann reference, while achieving order-of-magnitude prototype acceleration over floating-point baselines. These results demonstrate that, for conservative hyperbolic dynamics, executing the operator as quantised transfer rather than reconstructed field evolution can simultaneously alter structural fidelity and reduce computational cost, establishing a new representation paradigm for conservation-law solvers.
Read the full abstract

Mesoscale and Nanoscale Physics

Tensor-network simulation of quantum transport in many-quantum-dot systems

Transport through correlated nanoscale systems underpins the operation of quantum-dot and molecular-scale devices, yet accurate simulations of large open quantum systems remain computationally challenging as system size increases. Tensor-network methods offer a promising route past this scaling barrier by efficiently compressing quantum states. Here we extend a tensor-based solver with a jump-counting estimator that enables direct computation of steady-state electron currents from lead-induced tunneling events. We benchmark the resulting currents against the state-of-the-art master-equation solver QmeQ across a range of lead-dot and inter-dot coupling parameters and find quantitative agreement in the tractable regime. Compared with classical approaches, TJM reduces memory requirements and wall-clock time by orders of magnitude, enabling simulations of interacting quantum-dot arrays far beyond the range accessible to density-matrix-based transport solvers and systematic studies of size-dependent nonequilibrium transport in larger arrays. Our approach allow us to model quantum transport in an array of up to fifty (50) quantum dots.
Read the full abstract

Cosmology and Nongalactic Astrophysics

Cosmological Dynamics of Exponential Quintessence Constrained by BAO, Cosmic Chronometers, and DES-SN5YR/Pantheon+ Data

We perform a comprehensive observational test of a canonical quintessence model driven by an exponential potential, motivated by its emergence in higher-dimensional theories, string-inspired scenarios, and modified gravity. Using a Markov Chain Monte Carlo framework, we constrain the model with the latest high-precision observational datasets including Cosmic Chronometers, Baryon Acoustic Oscillation, Pantheon+, and DES-SN5YR Type Ia Supernovae. The combined data significantly tighten the parameter bounds on (H0, Omega_m0, eta0, gamma) and yield predictions for the Hubble parameter H(z), the distance modulus mu(z), and the scaled comoving angular diameter distance that remain in excellent agreement with observations and closely follow the LCDM baseline. An information-theoretic model comparison using the Akaike Information Criterion shows that the exponential quintessence model remains statistically comparable with LCDM despite having additional parameters. The model successfully reproduces the transition from matter domination to late-time acceleration, maintains w_tot > -1, and provides an age of the universe consistent with Planck 2018. Statefinder diagnostics indicate trajectories approaching the LCDM fixed point with small deviations, and energy condition analysis confirms physical viability, with only the Strong Energy Condition violated at late times as required for acceleration.
Read the full abstract

High Energy Physics (Phenomenology)

Squeezed double-$b$ tagging for light hadronic resonances at the LHC

A boosted light resonance decaying into $b\bar b$ can produce a single jet containing two bottom-hadron decay systems. We investigate this squeezed double-$b$ topology using a tracking-based boosted decision tree that distinguishes non-bottom, single-bottom and double-bottom jets. The classifier combines displaced-track multiplicities and momentum fractions with ordered impact parameters and jet kinematics. For the simulated jet samples, the double-bottom tagging response is approximately $83\%$, with corresponding single-bottom and non-bottom mistag responses of $9.7\%$ and $0.5\%$; charm contamination is assessed separately. The tagger is combined with soft-drop mass reconstruction and an event-level classifier using the candidate and recoil jets to identify light hadronic resonances within the QCD background. As an illustrative example, we consider a singlet extension of the flipped two-Higgs-doublet model with pseudoscalar masses of 30, 50 and 60 GeV. The signal samples use a simplified effective-vertex approximation, replacing the momentum-dependent quark-loop production interaction by a local vertex. A resolved loop calculation and higher-order production corrections are beyond the scope of this tagging study. The resulting reconstruction strategy can be applied to different signal hypotheses with their corresponding kinematic acceptance and tagging response.
Read the full abstract

All authors Dilip Kumar Ghosh, Biswarup Mukhopadhyaya, Sirshendu Samanta, Ritesh K. Singh

Applied Physics

Recognition of Nanoparticle and Microdroplet Parameters in Levitating Microdroplets of Suspension by Speckle Image Analysis Using Convolutional Neural Networks

Retrieving suspension parameters from light scattered by a suspension microdroplet is a difficult inverse problem because the recorded optical pattern is shaped by droplet morphology and by perturbations of the internal optical field introduced by the dispersed phase. Here we demonstrate experimental, data-driven recognition of microdroplet and nanoparticle-suspension parameters from laser speckle images recorded for individual levitated suspension microdroplets. We confined slowly evaporating TiO$_2$ nanoparticle suspensions in diethylene glycol in a linear electrodynamic quadrupole trap and classified their speckle patterns using a convolutional neural network (CNN). The CNN was trained and tested to recognize droplet diameter, nanoparticle mass concentration, and nanoparticle diameter, first separately and then in simultaneous two- and three-parameter tasks. The CNN recognized droplet diameter most robustly, with an estimated accuracy of approximately 6% on independent test data. Nanoparticle concentration required sufficiently separated classes. Nanoparticle-diameter classes were also recognized, although particle-size effects were coupled to changes in particle number at fixed mass concentration. We demonstrated simultaneous three-parameter classification across 27 classes. As an exploratory out-of-distribution test, we applied a CNN trained on single-component suspensions to dual-component suspensions containing two nanoparticle diameters. The CNN retained meaningful predictive capability, especially at higher concentrations, although robust decomposition of mixed nanoparticle populations was not achieved. These results show that speckle images of single levitated suspension microdroplets contain sufficient information for CNN-based multi-parameter recognition and support further development of speckle-based optical diagnostics for complex microdroplet and aerosol-like systems.
Read the full abstract

High Energy Astrophysical Phenomena

Probing the accretion geometry of the transient accreting millisecond pulsar SAX J1808.4-3658: transitions to the propeller regime

We analyze three NuSTAR observations and two NICER observations of the transient accreting millisecond pulsar SAX J1808.4-3658 in the hard spectral state during its most recent outbursts in 2022 and 2025. The spectral analysis of the persistent emission shows that the continuum is well described by an absorbed thermal Comptonization model with a high plasma temperature of ~25-90 keV. A prominent iron emission line around 5-8 keV and a Compton hump around 15-30 keV have been detected from all NuSTAR observations, indicating the reflection of the hard X-ray photon from the accretion disk. We employ the relativistic reflection model relxillCP to describe the reflection phenomena. The spectral fit of three NuSTAR observations shows that the inner disk radius moves outward, the Comptonized thermal emission decreases in flux, the mass accretion rate decreases, and the disk becomes less ionized as we proceed from the 2022 to the 2025 observations. Reflection studies also reveal a moderate inclination of the source within ~30-50 degrees. During the 2025 September observation, the inner radius of the disk is significantly truncated (~23R_g), and the corresponding magnetospheric radius is comprehensively larger than the disk's co-rotation radius, suggesting a hint of the transition to the propeller regime. Although the disk is truncated at the larger radius, accreted material is still reaching the surface of the neutron star, which is confirmed through the detection of a Type-I X-ray burst during this NuSTAR observation. The spectral analysis of the burst suggests helium burning at a low ignition depth.
Read the full abstract

Quantum Physics

Quantum MIMO Channel Modeling in Turbulent Free-Space Optical Links

Free-space optical (FSO) links supporting spatial multiplexing provide a natural physical realization of Quantum MIMO channels. We develop a first-principles model for Quantum MIMO channels derived directly from wave-optical propagation through three-dimensional atmospheric turbulence. The framework explicitly accounts for intermodal crosstalk, finite detection apertures, and the system-bath separation induced by spatial-mode projection. We distinguish between distinguishable and indistinguishable photon regimes, showing that indistinguishability leads to intrinsically many-body interference effects described by matrix permanents. To obtain a completely positive and trace-preserving logical description, we introduce an erasure-extended encoding in which turbulence-induced leakage and photon loss are mapped to flagged erasure states. The resulting Quantum MIMO channel naturally reduces to a correlated n-qubit erasure channel, with correlations arising from the shared turbulent medium. Limiting regimes in which correlated Pauli channels emerge as effective approximations are also identified.
Read the full abstract

All authors Heyang Peng, Seid Koudia, Semih Oktay, Mert Bayraktar, Symeon Chatzinotas

Atomic Physics

Recoil corrections to $\mu$H hyperfine splitting

This work attempts to present a complete theory of the $\mu$H hyperfine splitting, including all contributions above 1 ppm. Quantum electrodynamic and recoil corrections are calculated directly, while the proton structure correction is obtained with the help of the H hyperfine splitting. The resulting theoretical prediction for the ground state of $\mu$H is $E_\mathrm{hfs} = 182\,626(5)$ $\mu$eV.
Read the full abstract

High Energy Physics (Phenomenology)

Direct-detection constraints on inelastic dark matter with a scalar mediator

We phenomenologically calculate direct-detection constraints on inelastic dark matter (DM) for a scalar portal scenario with leptophilic couplings. The p-wave velocity suppression of the annihilation cross section of scalar-mediated inelastic Dirac DM implies the opening of viable regions of DM parameter space in the MeV-GeV mass range. Xenon-based experiments can provide a constraints on scalar-mediated inelastic fermion dark matter for sub-MeV mass splitting, via endothermic and exothermic spin-independent DM-electron scattering. To estimate the relevant constraints, we use public data from the XENON1T, PandaX-4T, and LZ liquid-xenon experiments that measure ionization electron signals.
Read the full abstract

Strongly Correlated Electrons

Development of ab initio Hubbard parameter calculation schemes in the k-point sampling real-time TDDFT program in CP2K

We implemented ab initio Hubbard parameter calculation schemes in the k-point sampling real-time TDDFT (RT-TDDFT) program in CP2K. We propose a new linear-response-based calculation scheme for energy-dependent Hubbard parameters. Our scheme extends the minimum-tracking linear-response method proposed in [Moynihan et al., arXiv preprint arXiv:1704.08076(2017); E. B. Linscott et al., Phys. Rev. B 98, 235157 (2018)] to realize the calculation of energy-dependent Hubbard parameters that reflect the exchange-correlation (xc) effects included in the xc-functional. We discuss the properties of the minimum-tracking linear-response method in comparison to another promising scheme, ACBN0 [Agapito et al., Phys. Rev. X, 5, 011006 (2015)]. We show that, while neither clearly outperforms the other in the accuracy of static property calculations, each has a distinct dynamical application depending on its theoretical formulation.
Read the full abstract